Last modified by Mengting Qiu on 2024/04/02 16:44
<
From version < 9.2 >
edited by Xiaoling
on 2022/06/06 15:53
To version < 31.4 >
edited by Xiaoling
on 2022/06/06 17:23
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,7 +1,6 @@
1 1  (% style="text-align:center" %)
2 2  [[image:image-20220606151504-2.jpeg||height="848" width="848"]]
3 3  
4 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]]
5 5  
6 6  
7 7  
... ... @@ -9,44 +9,40 @@
9 9  
10 10  
11 11  
11 += 1. Introduction =
12 12  
13 +== 1.1 ​What is LoRaWAN Soil Moisture & EC Sensor ==
13 13  
15 +(((
16 +The Dragino LSE01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil Moisture & EC Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity. It also has been calibrated in factory for Mineral soil type.
17 +)))
14 14  
19 +(((
20 +It detects (% style="color:#4f81bd" %)**Soil Moisture**(%%), (% style="color:#4f81bd" %)**Soil Temperature**(%%) and (% style="color:#4f81bd" %)**Soil Conductivity**(%%), and uploads the value via wireless to LoRaWAN IoT Server.
21 +)))
15 15  
16 -
17 -
18 -
19 -
20 -
21 -
22 -
23 -1. Introduction
24 -11. ​What is LoRaWAN Soil Moisture & EC Sensor
25 -
26 -The Dragino LSE01 is a **LoRaWAN Soil Moisture & EC Sensor** for IoT of Agriculture. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity. It also has been calibrated in factory for Mineral soil type.
27 -
28 -
29 -It detects **Soil Moisture**, **Soil Temperature** and **Soil Conductivity**, and uploads the value via wireless to LoRaWAN IoT Server.
30 -
31 -
23 +(((
32 32  The LoRa wireless technology used in LES01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
25 +)))
33 33  
27 +(((
28 +LES01 is powered by (% style="color:#4f81bd" %)**4000mA or 8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 10 years.
29 +)))
34 34  
35 -LES01 is powered by **4000mA or 8500mAh Li-SOCI2 battery**, It is designed for long term use up to 10 years.
36 -
37 -
31 +(((
38 38  Each LES01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
33 +)))
39 39  
40 40  
41 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.png]]
36 +[[image:1654503236291-817.png]]
42 42  
43 43  
44 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image003.png]]
39 +[[image:1654503265560-120.png]]
45 45  
46 46  
47 47  
48 -*
49 -*1. ​Features
43 +== 1.2 ​Features ==
44 +
50 50  * LoRaWAN 1.0.3 Class A
51 51  * Ultra low power consumption
52 52  * Monitor Soil Moisture
... ... @@ -59,63 +59,48 @@
59 59  * IP66 Waterproof Enclosure
60 60  * 4000mAh or 8500mAh Battery for long term use
61 61  
62 -1.
63 -11. Specification
57 +== 1.3 Specification ==
64 64  
65 65  Measure Volume: Base on the centra pin of the probe, a cylinder with 7cm diameter and 10cm height.
66 66  
67 -|**Parameter**|**Soil Moisture**|**Soil Conductivity**|**Soil Temperature**
68 -|**Range**|**0-100.00%**|(((
69 -**0-20000uS/cm**
61 +[[image:image-20220606162220-5.png]]
70 70  
71 -**(25℃)(0-20.0EC)**
72 -)))|**-40.00℃～85.00℃**
73 -|**Unit**|**V/V %,**|**uS/cm,**|**℃**
74 -|**Resolution**|**0.01%**|**1 uS/cm**|**0.01℃**
75 -|**Accuracy**|(((
76 -**±3% (0-53%)**
77 77  
78 -**±5% (>53%)**
79 -)))|**2%FS,**|(((
80 -**-10℃～50℃:<0.3℃**
81 81  
82 -**All other: <0.6℃**
83 -)))
84 -|(((
85 -**Measure**
65 +== ​1.4 Applications ==
86 86  
87 -**Method**
88 -)))|**FDR , with temperature &EC compensate**|**Conductivity , with temperature compensate**|**RTD, and calibrate**
89 -
90 -*
91 -*1. ​Applications
92 92  * Smart Agriculture
93 93  
94 -1.
95 -11. ​Firmware Change log
69 +(% class="wikigeneratedid" id="H200B1.5FirmwareChangelog" %)
70 +​
96 96  
97 -**LSE01 v1.0:**
72 +== 1.5 Firmware Change log ==
98 98  
99 -* Release
100 100  
101 -1. Configure LSE01 to connect to LoRaWAN network
102 -11. How it works
75 +**LSE01 v1.0 :**  Release
103 103  
104 -The LSE01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSE0150. It will automatically join the network via OTAA and start to send the sensor value
105 105  
106 106  
107 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#_​Using_the_AT]]to set the keys in the LSE01.
79 += 2. Configure LSE01 to connect to LoRaWAN network =
108 108  
81 +== 2.1 How it works ==
109 109  
83 +(((
84 +The LSE01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSE0150. It will automatically join the network via OTAA and start to send the sensor value
85 +)))
110 110  
87 +(((
88 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H3.​UsingtheATCommands"]].
89 +)))
111 111  
112 -1.
113 -11. ​Quick guide to connect to LoRaWAN server (OTAA)
114 114  
92 +
93 +== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
94 +
115 115  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.
116 116  
117 117  
118 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image003.png]]
98 +[[image:1654503992078-669.png]]
119 119  
120 120  
121 121  The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
... ... @@ -125,56 +125,40 @@
125 125  
126 126  Each LSE01 is shipped with a sticker with the default device EUI as below:
127 127  
108 +[[image:image-20220606163732-6.jpeg]]
128 128  
129 -
130 -
131 131  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
132 132  
133 -
134 134  **Add APP EUI in the application**
135 135  
136 136  
137 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]
115 +[[image:1654504596150-405.png]]
138 138  
139 139  
140 140  
141 141  **Add APP KEY and DEV EUI**
142 142  
121 +[[image:1654504683289-357.png]]
143 143  
144 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image005.png]]
145 145  
146 -|(((
147 -
148 -)))
149 149  
150 -
151 151  **Step 2**: Power on LSE01
152 152  
153 153  
154 154  Put a Jumper on JP2 to power on the device. ( The Jumper must be in FLASH position).
155 155  
130 +[[image:image-20220606163915-7.png]]
156 156  
157 157  
158 -|(((
159 -
160 -)))
161 -
162 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.png]]
163 -
164 -
165 -
166 -
167 -
168 168  **Step 3:** The LSE01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
169 169  
170 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image007.png]]
135 +[[image:1654504778294-788.png]]
171 171  
172 172  
173 173  
139 +== 2.3 Uplink Payload ==
174 174  
175 -1.
176 -11. ​Uplink Payload
177 -111. MOD=0(Default Mode)
141 +=== 2.3.1 MOD~=0(Default Mode) ===
178 178  
179 179  LSE01 will uplink payload via LoRaWAN with below payload format: 
180 180  
... ... @@ -197,13 +197,12 @@
197 197  (Optional)
198 198  )))
199 199  
200 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image007.png]]
164 +[[image:1654504881641-514.png]]
201 201  
202 202  
203 -1.
204 -11.
205 -111. MOD=1(Original value)
206 206  
168 +=== 2.3.2 MOD~=1(Original value) ===
169 +
207 207  This mode can get the original AD value of moisture and original conductivity (with temperature drift compensation).
208 208  
209 209  |(((
... ... @@ -221,12 +221,12 @@
221 221  (Optional)
222 222  )))
223 223  
224 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.png]]
187 +[[image:1654504907647-967.png]]
225 225  
226 -1.
227 -11.
228 -111. Battery Info
229 229  
190 +
191 +=== 2.3.3 Battery Info ===
192 +
230 230  Check the battery voltage for LSE01.
231 231  
232 232  Ex1: 0x0B45 = 2885mV
... ... @@ -235,21 +235,19 @@
235 235  
236 236  
237 237  
238 -1.
239 -11.
240 -111. Soil Moisture
201 +=== 2.3.4 Soil Moisture ===
241 241  
242 242  Get the moisture content of the soil. The value range of the register is 0-10000(Decimal), divide this value by 100 to get the percentage of moisture in the soil.
243 243  
244 -For example, if the data you get from the register is 0x05 0xDC, the moisture content in the soil is
205 +For example, if the data you get from the register is __0x05 0xDC__, the moisture content in the soil is
245 245  
246 -**05DC(H) = 1500(D) /100 = 15%.**
247 247  
208 +(% style="color:#4f81bd" %)**05DC(H) = 1500(D) /100 = 15%.**
248 248  
249 -1.
250 -11.
251 -111. Soil Temperature
252 252  
211 +
212 +=== 2.3.5 Soil Temperature ===
213 +
253 253   Get the temperature in the soil. The value range of the register is -4000 - +800(Decimal), divide this value by 100 to get the temperature in the soil. For example, if the data you get from the register is 0x09 0xEC, the temperature content in the soil is
254 254  
255 255  **Example**:
... ... @@ -259,21 +259,31 @@
259 259  If payload is FF7EH: ((FF7E & 0x8000)>>15 ===1),temp = (FF7E(H)-FFFF(H))/100 = -1.29 °C
260 260  
261 261  
262 -1.
263 -11.
264 -111. Soil Conductivity (EC)
265 265  
266 -Obtain soluble salt concentration in soil or soluble ion concentration in liquid fertilizer or planting medium,. The value range of the register is 0 - 20000(Decimal)( Can be greater than 20000).
224 +=== 2.3.6 Soil Conductivity (EC) ===
267 267  
226 +(((
227 +Obtain (% style="color:#4f81bd" %)**__soluble salt concentration__**(%%) in soil or (% style="color:#4f81bd" %)**__soluble ion concentration in liquid fertilizer__**(%%) or (% style="color:#4f81bd" %)**__planting medium__**(%%). The value range of the register is 0 - 20000(Decimal)( Can be greater than 20000).
228 +)))
229 +
230 +(((
268 268  For example, if the data you get from the register is 0x00 0xC8, the soil conductivity is 00C8(H) = 200(D) = 200 uS/cm.
232 +)))
269 269  
270 -
234 +(((
271 271  Generally, the EC value of irrigation water is less than 800uS / cm.
236 +)))
272 272  
273 -1.
274 -11.
275 -111. MOD
238 +(((
239 +
240 +)))
276 276  
242 +(((
243 +
244 +)))
245 +
246 +=== 2.3.7 MOD ===
247 +
277 277  Firmware version at least v2.1 supports changing mode.
278 278  
279 279  For example, bytes[10]=90
... ... @@ -288,14 +288,13 @@
288 288  If** **payload =** **0x0A01, workmode=1
289 289  
290 290  
291 -1.
292 -11.
293 -111. ​Decode payload in The Things Network
294 294  
263 +=== 2.3.8 ​Decode payload in The Things Network ===
264 +
295 295  While using TTN network, you can add the payload format to decode the payload.
296 296  
297 297  
298 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image009.png]]
268 +[[image:1654505570700-128.png]]
299 299  
300 300  The payload decoder function for TTN is here:
301 301  
... ... @@ -302,30 +302,26 @@
302 302  LSE01 TTN Payload Decoder: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Payload_Decoder/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Payload_Decoder/]]
303 303  
304 304  
305 -1.
306 -11. Uplink Interval
275 +== 2.4 Uplink Interval ==
307 307  
308 308  The LSE01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link:
309 309  
310 310  [[http:~~/~~/wiki.dragino.com/index.php?title=End_Device_AT_Commands_and_Downlink_Commands#Change_Uplink_Interval>>url:http://wiki.dragino.com/index.php?title=End_Device_AT_Commands_and_Downlink_Commands#Change_Uplink_Interval]]
311 311  
312 -1.
313 -11. ​Downlink Payload
314 314  
282 +
283 +== 2.5 Downlink Payload ==
284 +
315 315  By default, LSE50 prints the downlink payload to console port.
316 316  
317 -|**Downlink Control Type**|**FPort**|**Type Code**|**Downlink payload size(bytes)**
318 -|TDC (Transmit Time Interval)|Any|01|4
319 -|RESET|Any|04|2
320 -|AT+CFM|Any|05|4
321 -|INTMOD|Any|06|4
322 -|MOD|Any|0A|2
287 +[[image:image-20220606165544-8.png]]
323 323  
324 -**Examples**
325 325  
290 +**Examples:**
326 326  
327 -**Set TDC**
328 328  
293 +* **Set TDC**
294 +
329 329  If the payload=0100003C, it means set the END Node’s TDC to 0x00003C=60(S), while type code is 01.
330 330  
331 331  Payload:    01 00 00 1E    TDC=30S
... ... @@ -333,18 +333,19 @@
333 333  Payload:    01 00 00 3C    TDC=60S
334 334  
335 335  
336 -**Reset**
302 +* **Reset**
337 337  
338 338  If payload = 0x04FF, it will reset the LSE01
339 339  
340 340  
341 -**CFM**
307 +* **CFM**
342 342  
343 343  Downlink Payload: 05000001, Set AT+CFM=1 or 05000000 , set AT+CFM=0
344 344  
345 -1.
346 -11. ​Show Data in DataCake IoT Server
347 347  
312 +
313 +== 2.6 ​Show Data in DataCake IoT Server ==
314 +
348 348  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
349 349  
350 350  
... ... @@ -353,42 +353,34 @@
353 353  **Step 2**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
354 354  
355 355  
356 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.png]]
323 +[[image:1654505857935-743.png]]
357 357  
358 358  
359 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image011.png]]
326 +[[image:1654505874829-548.png]]
360 360  
361 -
362 -
363 -
364 -
365 365  Step 3: Create an account or log in Datacake.
366 366  
367 367  Step 4: Search the LSE01 and add DevEUI.
368 368  
369 369  
370 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.png]]
333 +[[image:1654505905236-553.png]]
371 371  
372 372  
373 -
374 374  After added, the sensor data arrive TTN, it will also arrive and show in Mydevices.
375 375  
338 +[[image:1654505925508-181.png]]
376 376  
377 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image013.png]]
378 378  
379 379  
342 +== 2.7 Frequency Plans ==
380 380  
381 -1.
382 -11. Frequency Plans
383 -
384 384  The LSE01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
385 385  
386 -1.
387 -11.
388 -111. EU863-870 (EU868)
389 389  
390 -Uplink:
347 +=== 2.7.1 EU863-870 (EU868) ===
391 391  
349 +(% style="color:#037691" %)** Uplink:**
350 +
392 392  868.1 - SF7BW125 to SF12BW125
393 393  
394 394  868.3 - SF7BW125 to SF12BW125 and SF7BW250
... ... @@ -408,7 +408,7 @@
408 408  868.8 - FSK
409 409  
410 410  
411 -Downlink:
370 +(% style="color:#037691" %)** Downlink:**
412 412  
413 413  Uplink channels 1-9 (RX1)
414 414  
... ... @@ -415,13 +415,12 @@
415 415  869.525 - SF9BW125 (RX2 downlink only)
416 416  
417 417  
418 -1.
419 -11.
420 -111. US902-928(US915)
421 421  
378 +=== 2.7.2 US902-928(US915) ===
379 +
422 422  Used in USA, Canada and South America. Default use CHE=2
423 423  
424 -Uplink:
382 +(% style="color:#037691" %)**Uplink:**
425 425  
426 426  903.9 - SF7BW125 to SF10BW125
427 427  
... ... @@ -440,7 +440,7 @@
440 440  905.3 - SF7BW125 to SF10BW125
441 441  
442 442  
443 -Downlink:
401 +(% style="color:#037691" %)**Downlink:**
444 444  
445 445  923.3 - SF7BW500 to SF12BW500
446 446  
... ... @@ -461,13 +461,12 @@
461 461  923.3 - SF12BW500(RX2 downlink only)
462 462  
463 463  
464 -1.
465 -11.
466 -111. CN470-510 (CN470)
467 467  
423 +=== 2.7.3 CN470-510 (CN470) ===
424 +
468 468  Used in China, Default use CHE=1
469 469  
470 -Uplink:
427 +(% style="color:#037691" %)**Uplink:**
471 471  
472 472  486.3 - SF7BW125 to SF12BW125
473 473  
... ... @@ -486,7 +486,7 @@
486 486  487.7 - SF7BW125 to SF12BW125
487 487  
488 488  
489 -Downlink:
446 +(% style="color:#037691" %)**Downlink:**
490 490  
491 491  506.7 - SF7BW125 to SF12BW125
492 492  
... ... @@ -507,13 +507,12 @@
507 507  505.3 - SF12BW125 (RX2 downlink only)
508 508  
509 509  
510 -1.
511 -11.
512 -111. AU915-928(AU915)
513 513  
468 +=== 2.7.4 AU915-928(AU915) ===
469 +
514 514  Default use CHE=2
515 515  
516 -Uplink:
472 +(% style="color:#037691" %)**Uplink:**
517 517  
518 518  916.8 - SF7BW125 to SF12BW125
519 519  
... ... @@ -532,7 +532,7 @@
532 532  918.2 - SF7BW125 to SF12BW125
533 533  
534 534  
535 -Downlink:
491 +(% style="color:#037691" %)**Downlink:**
536 536  
537 537  923.3 - SF7BW500 to SF12BW500
538 538  
... ... @@ -552,22 +552,22 @@
552 552  
553 553  923.3 - SF12BW500(RX2 downlink only)
554 554  
555 -1.
556 -11.
557 -111. AS920-923 & AS923-925 (AS923)
558 558  
559 -**Default Uplink channel:**
560 560  
513 +=== 2.7.5 AS920-923 & AS923-925 (AS923) ===
514 +
515 +(% style="color:#037691" %)**Default Uplink channel:**
516 +
561 561  923.2 - SF7BW125 to SF10BW125
562 562  
563 563  923.4 - SF7BW125 to SF10BW125
564 564  
565 565  
566 -**Additional Uplink Channel**:
522 +(% style="color:#037691" %)**Additional Uplink Channel**:
567 567  
568 568  (OTAA mode, channel added by JoinAccept message)
569 569  
570 -**AS920~~AS923 for Japan, Malaysia, Singapore**:
526 +(% style="color:#037691" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
571 571  
572 572  922.2 - SF7BW125 to SF10BW125
573 573  
... ... @@ -582,7 +582,7 @@
582 582  922.0 - SF7BW125 to SF10BW125
583 583  
584 584  
585 -**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
541 +(% style="color:#037691" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
586 586  
587 587  923.6 - SF7BW125 to SF10BW125
588 588  
... ... @@ -597,18 +597,16 @@
597 597  924.6 - SF7BW125 to SF10BW125
598 598  
599 599  
556 +(% style="color:#037691" %)** Downlink:**
600 600  
601 -**Downlink:**
602 -
603 603  Uplink channels 1-8 (RX1)
604 604  
605 605  923.2 - SF10BW125 (RX2)
606 606  
607 607  
608 -1.
609 -11.
610 -111. KR920-923 (KR920)
611 611  
564 +=== 2.7.6 KR920-923 (KR920) ===
565 +
612 612  Default channel:
613 613  
614 614  922.1 - SF7BW125 to SF12BW125
... ... @@ -618,7 +618,7 @@
618 618  922.5 - SF7BW125 to SF12BW125
619 619  
620 620  
621 -Uplink: (OTAA mode, channel added by JoinAccept message)
575 +(% style="color:#037691" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
622 622  
623 623  922.1 - SF7BW125 to SF12BW125
624 624  
... ... @@ -635,7 +635,7 @@
635 635  923.3 - SF7BW125 to SF12BW125
636 636  
637 637  
638 -Downlink:
592 +(% style="color:#037691" %)**Downlink:**
639 639  
640 640  Uplink channels 1-7(RX1)
641 641  
... ... @@ -642,12 +642,11 @@
642 642  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
643 643  
644 644  
645 -1.
646 -11.
647 -111. IN865-867 (IN865)
648 648  
649 -Uplink:
600 +=== 2.7.7 IN865-867 (IN865) ===
650 650  
602 +(% style="color:#037691" %)** Uplink:**
603 +
651 651  865.0625 - SF7BW125 to SF12BW125
652 652  
653 653  865.4025 - SF7BW125 to SF12BW125
... ... @@ -655,7 +655,7 @@
655 655  865.9850 - SF7BW125 to SF12BW125
656 656  
657 657  
658 -Downlink:
611 +(% style="color:#037691" %) **Downlink:**
659 659  
660 660  Uplink channels 1-3 (RX1)
661 661  
... ... @@ -662,65 +662,55 @@
662 662  866.550 - SF10BW125 (RX2)
663 663  
664 664  
665 -1.
666 -11. LED Indicator
667 667  
668 -The LSE01 has an internal LED which is to show the status of different state.
669 669  
620 +== 2.8 LED Indicator ==
670 670  
622 +The LSE01 has an internal LED which is to show the status of different state.
623 +
671 671  * Blink once when device power on.
672 672  * Solid ON for 5 seconds once device successful Join the network.
673 673  * Blink once when device transmit a packet.
674 674  
675 -1.
676 -11. Installation in Soil
677 677  
629 +== 2.9 Installation in Soil ==
630 +
678 678  **Measurement the soil surface**
679 679  
680 680  
681 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.png]] ​
634 +[[image:1654506634463-199.png]] ​
682 682  
636 +(((
683 683  Choose the proper measuring position. Avoid the probe to touch rocks or hard things. Split the surface soil according to the measured deep. Keep the measured as original density. Vertical insert the probe into the soil to be measured. Make sure not shake when inserting.
638 +)))
684 684  
685 685  
686 686  
642 +[[image:1654506665940-119.png]]
687 687  
688 -
689 -
690 -
691 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image015.png]]
692 -
693 -
694 -
695 695  Dig a hole with diameter > 20CM.
696 696  
697 697  Horizontal insert the probe to the soil and fill the hole for long term measurement.
698 698  
699 699  
649 +== 2.10 ​Firmware Change Log ==
700 700  
701 -
702 -1.
703 -11. ​Firmware Change Log
704 -
705 705  **Firmware download link:**
706 706  
707 707  [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
708 708  
709 709  
710 -**Firmware Upgrade Method:**
656 +**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]
711 711  
712 -[[http:~~/~~/wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Introduction>>url:http://wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Introduction]]
713 713  
714 -
715 715  **V1.0.**
716 716  
717 717  Release
718 718  
719 719  
664 +== 2.11 ​Battery Analysis ==
720 720  
721 -1.
722 -11. ​Battery Analysis
723 -111. ​Battery Type
666 +=== 2.11.1 ​Battery Type ===
724 724  
725 725  The LSE01 battery is a combination of a 4000mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
726 726  
... ... @@ -728,48 +728,53 @@
728 728  The battery is designed to last for more than 5 years for the LSN50.
729 729  
730 730  
731 -The battery related documents as below:
674 +(((
675 +The battery-related documents are as below:
676 +)))
732 732  
733 -* [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
734 -* [[Lithium-Thionyl Chloride Battery>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/ER18505_datasheet-EN.pdf]] datasheet, [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/ER18505_datasheet_PM-ER18505-S-02-LF_EN.pdf]]
735 -* [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
736 -
737 -|(((
738 -JST-XH-2P connector
678 +* (((
679 +[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
739 739  )))
681 +* (((
682 +[[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
683 +)))
684 +* (((
685 +[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
686 +)))
740 740  
741 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.png]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image017.png]]
688 + [[image:image-20220606171726-9.png]]
742 742  
743 743  
744 744  
745 -1.
746 -11.
747 -111. ​Battery Note
692 +=== 2.11.2 ​Battery Note ===
748 748  
694 +(((
749 749  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
696 +)))
750 750  
751 751  
752 -1.
753 -11.
754 -111. ​Replace the battery
755 755  
700 +=== 2.11.3 Replace the battery ===
701 +
702 +(((
756 756  If Battery is lower than 2.7v, user should replace the battery of LSE01.
704 +)))
757 757  
758 -
706 +(((
759 759  You can change the battery in the LSE01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
708 +)))
760 760  
761 -
710 +(((
762 762  The default battery pack of LSE01 includes a ER18505 plus super capacitor. If user can’t find this pack locally, they can find ER18505 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
712 +)))
763 763  
764 764  
765 765  
766 -
767 -
768 -
769 769  = 3. ​Using the AT Commands =
770 770  
771 771  == 3.1 Access AT Commands ==
772 772  
720 +
773 773  LSE01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSE01 for using AT command, as below.
774 774  
775 775  [[image:1654501986557-872.png]]
... ... @@ -778,129 +778,124 @@
778 778  Or if you have below board, use below connection:
779 779  
780 780  
781 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]]
729 +[[image:1654502005655-729.png]]
782 782  
783 783  
784 784  
785 -In the PC, you need to set the serial baud rate to **9600** to access the serial console for LSE01. LSE01 will output system info once power on as below:
733 +In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSE01. LSE01 will output system info once power on as below:
786 786  
787 787  
788 - [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
736 + [[image:1654502050864-459.png]]
789 789  
790 790  
791 791  Below are the available commands, a more detailed AT Command manual can be found at [[AT Command Manual>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/]]: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/]]
792 792  
793 793  
794 -AT+<CMD>?        : Help on <CMD>
742 +(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>? **(%%) : Help on <CMD>
795 795  
796 -AT+<CMD>         : Run <CMD>
744 +(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD> **(%%) : Run <CMD>
797 797  
798 -AT+<CMD>=<value> : Set the value
746 +(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>=<value>**(%%) : Set the value
799 799  
800 -AT+<CMD>=?       : Get the value
748 +(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>=?**(%%)  : Get the value
801 801  
802 802  
803 -**General Commands**      
751 +(% style="color:#037691" %)**General Commands**(%%)      
804 804  
805 -AT                    : Attention       
753 +(% style="background-color:#dcdcdc" %)**AT**(%%)  : Attention       
806 806  
807 -AT?                            : Short Help     
755 +(% style="background-color:#dcdcdc" %)**AT?**(%%)  : Short Help     
808 808  
809 -ATZ                            : MCU Reset    
757 +(% style="background-color:#dcdcdc" %)**ATZ**(%%)  : MCU Reset    
810 810  
811 -AT+TDC           : Application Data Transmission Interval 
759 +(% style="background-color:#dcdcdc" %)**AT+TDC**(%%)  : Application Data Transmission Interval 
812 812  
813 813  
814 -**Keys, IDs and EUIs management**
762 +(% style="color:#037691" %)**Keys, IDs and EUIs management**
815 815  
816 -AT+APPEUI              : Application EUI      
764 +(% style="background-color:#dcdcdc" %)**AT+APPEUI**(%%)              : Application EUI      
817 817  
818 -AT+APPKEY              : Application Key     
766 +(% style="background-color:#dcdcdc" %)**AT+APPKEY**(%%)              : Application Key     
819 819  
820 -AT+APPSKEY            : Application Session Key
768 +(% style="background-color:#dcdcdc" %)**AT+APPSKEY**(%%)            : Application Session Key
821 821  
822 -AT+DADDR              : Device Address     
770 +(% style="background-color:#dcdcdc" %)**AT+DADDR**(%%)              : Device Address     
823 823  
824 -AT+DEUI                   : Device EUI     
772 +(% style="background-color:#dcdcdc" %)**AT+DEUI**(%%)                   : Device EUI     
825 825  
826 -AT+NWKID               : Network ID (You can enter this command change only after successful network connection) 
774 +(% style="background-color:#dcdcdc" %)**AT+NWKID**(%%)               : Network ID (You can enter this command change only after successful network connection) 
827 827  
828 -AT+NWKSKEY          : Network Session Key Joining and sending date on LoRa network  
776 +(% style="background-color:#dcdcdc" %)**AT+NWKSKEY**(%%)          : Network Session Key Joining and sending date on LoRa network  
829 829  
830 -AT+CFM          : Confirm Mode       
778 +(% style="background-color:#dcdcdc" %)**AT+CFM**(%%)  : Confirm Mode       
831 831  
832 -AT+CFS                     : Confirm Status       
780 +(% style="background-color:#dcdcdc" %)**AT+CFS**(%%)                     : Confirm Status       
833 833  
834 -AT+JOIN          : Join LoRa? Network       
782 +(% style="background-color:#dcdcdc" %)**AT+JOIN**(%%)  : Join LoRa? Network       
835 835  
836 -AT+NJM          : LoRa? Network Join Mode    
784 +(% style="background-color:#dcdcdc" %)**AT+NJM**(%%)  : LoRa? Network Join Mode    
837 837  
838 -AT+NJS                     : LoRa? Network Join Status    
786 +(% style="background-color:#dcdcdc" %)**AT+NJS**(%%)                     : LoRa? Network Join Status    
839 839  
840 -AT+RECV                  : Print Last Received Data in Raw Format
788 +(% style="background-color:#dcdcdc" %)**AT+RECV**(%%)                  : Print Last Received Data in Raw Format
841 841  
842 -AT+RECVB                : Print Last Received Data in Binary Format      
790 +(% style="background-color:#dcdcdc" %)**AT+RECVB**(%%)                : Print Last Received Data in Binary Format      
843 843  
844 -AT+SEND                  : Send Text Data      
792 +(% style="background-color:#dcdcdc" %)**AT+SEND**(%%)                  : Send Text Data      
845 845  
846 -AT+SENB                  : Send Hexadecimal Data
794 +(% style="background-color:#dcdcdc" %)**AT+SENB**(%%)                  : Send Hexadecimal Data
847 847  
848 848  
849 -**LoRa Network Management**
797 +(% style="color:#037691" %)**LoRa Network Management**
850 850  
851 -AT+ADR          : Adaptive Rate
799 +(% style="background-color:#dcdcdc" %)**AT+ADR**(%%)          : Adaptive Rate
852 852  
853 -AT+CLASS                : LoRa Class(Currently only support class A
801 +(% style="background-color:#dcdcdc" %)**AT+CLASS**(%%)  : LoRa Class(Currently only support class A
854 854  
855 -AT+DCS           : Duty Cycle Setting 
803 +(% style="background-color:#dcdcdc" %)**AT+DCS**(%%)  : Duty Cycle Setting 
856 856  
857 -AT+DR                      : Data Rate (Can Only be Modified after ADR=0)     
805 +(% style="background-color:#dcdcdc" %)**AT+DR**(%%)  : Data Rate (Can Only be Modified after ADR=0)     
858 858  
859 -AT+FCD           : Frame Counter Downlink       
807 +(% style="background-color:#dcdcdc" %)**AT+FCD**(%%)  : Frame Counter Downlink       
860 860  
861 -AT+FCU           : Frame Counter Uplink   
809 +(% style="background-color:#dcdcdc" %)**AT+FCU**(%%)  : Frame Counter Uplink   
862 862  
863 -AT+JN1DL                : Join Accept Delay1
811 +(% style="background-color:#dcdcdc" %)**AT+JN1DL**(%%)  : Join Accept Delay1
864 864  
865 -AT+JN2DL                : Join Accept Delay2
813 +(% style="background-color:#dcdcdc" %)**AT+JN2DL**(%%)  : Join Accept Delay2
866 866  
867 -AT+PNM                   : Public Network Mode   
815 +(% style="background-color:#dcdcdc" %)**AT+PNM**(%%)  : Public Network Mode   
868 868  
869 -AT+RX1DL                : Receive Delay1      
817 +(% style="background-color:#dcdcdc" %)**AT+RX1DL**(%%)  : Receive Delay1      
870 870  
871 -AT+RX2DL                : Receive Delay2      
819 +(% style="background-color:#dcdcdc" %)**AT+RX2DL**(%%)  : Receive Delay2      
872 872  
873 -AT+RX2DR               : Rx2 Window Data Rate 
821 +(% style="background-color:#dcdcdc" %)**AT+RX2DR**(%%)  : Rx2 Window Data Rate 
874 874  
875 -AT+RX2FQ               : Rx2 Window Frequency
823 +(% style="background-color:#dcdcdc" %)**AT+RX2FQ**(%%)  : Rx2 Window Frequency
876 876  
877 -AT+TXP           : Transmit Power
825 +(% style="background-color:#dcdcdc" %)**AT+TXP**(%%)  : Transmit Power
878 878  
879 -AT+ MOD                 : Set work mode
827 +(% style="background-color:#dcdcdc" %)**AT+ MOD**(%%)  : Set work mode
880 880  
881 881  
882 -**Information** 
830 +(% style="color:#037691" %)**Information** 
883 883  
884 -AT+RSSI           : RSSI of the Last Received Packet   
832 +(% style="background-color:#dcdcdc" %)**AT+RSSI**(%%)           : RSSI of the Last Received Packet   
885 885  
886 -AT+SNR           : SNR of the Last Received Packet   
834 +(% style="background-color:#dcdcdc" %)**AT+SNR**(%%)           : SNR of the Last Received Packet   
887 887  
888 -AT+VER           : Image Version and Frequency Band       
836 +(% style="background-color:#dcdcdc" %)**AT+VER**(%%)           : Image Version and Frequency Band       
889 889  
890 -AT+FDR           : Factory Data Reset
838 +(% style="background-color:#dcdcdc" %)**AT+FDR**(%%)           : Factory Data Reset
891 891  
892 -AT+PORT                  : Application Port    
840 +(% style="background-color:#dcdcdc" %)**AT+PORT**(%%)  : Application Port    
893 893  
894 -AT+CHS           : Get or Set Frequency (Unit: Hz) for Single Channel Mode
842 +(% style="background-color:#dcdcdc" %)**AT+CHS**(%%)  : Get or Set Frequency (Unit: Hz) for Single Channel Mode
895 895  
896 - AT+CHE                   : Get or Set eight channels mode, Only for US915, AU915, CN470
844 + (% style="background-color:#dcdcdc" %)**AT+CHE**(%%)  : Get or Set eight channels mode, Only for US915, AU915, CN470
897 897  
898 898  
899 -
900 -
901 -
902 -
903 -
904 904  = ​4. FAQ =
905 905  
906 906  == 4.1 ​How to change the LoRa Frequency Bands/Region? ==
... ... @@ -931,7 +931,6 @@
931 931  * 905.3 - SF7BW125 to SF10BW125
932 932  * 904.6 - SF8BW500
933 933  
934 -
935 935  Because the end node is now hopping in 72 frequency, it makes it difficult for the devices to Join the TTN network and uplink data. To solve this issue, you can access the device via the AT commands and run:
936 936  
937 937  (% class="box infomessage" %)
... ... @@ -1042,3 +1042,4 @@
1042 1042  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1043 1043  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1044 1044  
987 +
1654502005655-729.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +915.0 KB
Content
1654502050864-459.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.6 KB
Content
1654503236291-817.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +685.6 KB
Content
1654503265560-120.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.8 KB
Content
1654503992078-669.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.8 KB
Content
1654504596150-405.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +66.7 KB
Content
1654504683289-357.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +94.0 KB
Content
1654504778294-788.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.4 KB
Content
1654504881641-514.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.4 KB
Content
1654504907647-967.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +54.7 KB
Content
1654505570700-128.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +59.2 KB
Content
1654505857935-743.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +86.0 KB
Content
1654505874829-548.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +129.9 KB
Content
1654505905236-553.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +92.0 KB
Content
1654505925508-181.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +69.5 KB
Content
1654506634463-199.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +344.4 KB
Content
1654506665940-119.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +423.3 KB
Content
image-20220606162220-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +23.0 KB
Content
image-20220606163732-6.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.5 KB
Content
image-20220606163915-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +94.8 KB
Content
image-20220606165544-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +11.6 KB
Content
image-20220606171726-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +171.0 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0