Last modified by Mengting Qiu on 2024/04/02 16:44
<
From version < 64.5 >
edited by Xiaoling
on 2022/07/08 14:57
To version < 57.9 >
edited by Xiaoling
on 2022/07/08 12:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -312,6 +312,7 @@
312 312  * Soil Conductivity(EC) = 0x02f9 =761 uS /cm
313 313  * Interrupt: 0x00 = 0
314 314  
315 +
315 315  == 2.4  Payload Explanation and Sensor Interface ==
316 316  
317 317  
... ... @@ -453,8 +453,10 @@
453 453  
454 454  
455 455  
457 +
456 456  === 2.4.9  ​+5V Output ===
457 457  
460 +
458 458  NSE01 will enable +5V output before all sampling and disable the +5v after all sampling. 
459 459  
460 460  
... ... @@ -466,13 +466,19 @@
466 466  
467 467  
468 468  
469 -== 2.5  Downlink Payload ==
472 +== 2.4 Uplink Interval ==
470 470  
471 -By default, NSE01 prints the downlink payload to console port.
474 +The LSE01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
472 472  
473 -[[image:image-20220708133731-5.png]]
474 474  
475 475  
478 +== 2.5 Downlink Payload ==
479 +
480 +By default, LSE50 prints the downlink payload to console port.
481 +
482 +[[image:image-20220606165544-8.png]]
483 +
484 +
476 476  (((
477 477  (% style="color:blue" %)**Examples:**
478 478  )))
... ... @@ -486,7 +486,7 @@
486 486  )))
487 487  
488 488  (((
489 -If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
498 +If the payload=0100003C, it means set the END Node’s TDC to 0x00003C=60(S), while type code is 01.
490 490  )))
491 491  
492 492  (((
... ... @@ -506,285 +506,719 @@
506 506  )))
507 507  
508 508  (((
509 -If payload = 0x04FF, it will reset the NSE01
518 +If payload = 0x04FF, it will reset the LSE01
510 510  )))
511 511  
512 512  
513 -* (% style="color:blue" %)**INTMOD**
522 +* (% style="color:blue" %)**CFM**
514 514  
515 -Downlink Payload: 06000003, Set AT+INTMOD=3
524 +Downlink Payload: 05000001, Set AT+CFM=1 or 05000000 , set AT+CFM=0
516 516  
517 517  
518 518  
519 -== 2.6  ​LED Indicator ==
528 +== 2.6 ​Show Data in DataCake IoT Server ==
520 520  
521 521  (((
522 -The NSE01 has an internal LED which is to show the status of different state.
531 +[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
532 +)))
523 523  
534 +(((
535 +
536 +)))
524 524  
525 -* When power on, NSE01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
526 -* Then the LED will be on for 1 second means device is boot normally.
527 -* After NSE01 join NB-IoT network. The LED will be ON for 3 seconds.
528 -* For each uplink probe, LED will be on for 500ms.
538 +(((
539 +(% style="color:blue" %)**Step 1**(%%):  Be sure that your device is programmed and properly connected to the network at this time.
529 529  )))
530 530  
542 +(((
543 +(% style="color:blue" %)**Step 2**(%%):  To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
544 +)))
531 531  
532 532  
547 +[[image:1654505857935-743.png]]
533 533  
534 -== 2.7  Installation in Soil ==
535 535  
536 -__**Measurement the soil surface**__
550 +[[image:1654505874829-548.png]]
537 537  
538 -Choose the proper measuring position. Avoid the probe to touch rocks or hard things. Split the surface soil according to the measured deep. Keep the measured as original density. Vertical insert the probe into the soil to be measured. Make sure not shake when inserting. [[https:~~/~~/img.alicdn.com/imgextra/i3/2005165265/O1CN010rj9Oh1olPsQxrdUK_!!2005165265.jpg>>url:https://img.alicdn.com/imgextra/i3/2005165265/O1CN010rj9Oh1olPsQxrdUK_!!2005165265.jpg]]
539 539  
540 -[[image:1657259653666-883.png]] ​
553 +(% style="color:blue" %)**Step 3**(%%)**:**  Create an account or log in Datacake.
541 541  
555 +(% style="color:blue" %)**Step 4**(%%)**:**  Search the LSE01 and add DevEUI.
542 542  
543 -(((
544 -
545 545  
546 -(((
547 -Dig a hole with diameter > 20CM.
548 -)))
558 +[[image:1654505905236-553.png]]
549 549  
550 -(((
551 -Horizontal insert the probe to the soil and fill the hole for long term measurement.
552 -)))
553 -)))
554 554  
555 -[[image:1654506665940-119.png]]
561 +After added, the sensor data arrive TTN, it will also arrive and show in Mydevices.
556 556  
557 -(((
558 -
559 -)))
563 +[[image:1654505925508-181.png]]
560 560  
561 561  
562 -== 2.8  ​Firmware Change Log ==
563 563  
567 +== 2.7 Frequency Plans ==
564 564  
565 -Download URL & Firmware Change log
569 +The LSE01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
566 566  
567 -[[www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/Firmware/]]
568 568  
572 +=== 2.7.1 EU863-870 (EU868) ===
569 569  
570 -Upgrade Instruction: [[Upgrade_Firmware>>||anchor="H"]]
574 +(% style="color:#037691" %)** Uplink:**
571 571  
576 +868.1 - SF7BW125 to SF12BW125
572 572  
578 +868.3 - SF7BW125 to SF12BW125 and SF7BW250
573 573  
574 -== 2.9  ​Battery Analysis ==
580 +868.5 - SF7BW125 to SF12BW125
575 575  
576 -=== 2.9.1  ​Battery Type ===
582 +867.1 - SF7BW125 to SF12BW125
577 577  
584 +867.3 - SF7BW125 to SF12BW125
578 578  
579 -The NSE01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
586 +867.5 - SF7BW125 to SF12BW125
580 580  
588 +867.7 - SF7BW125 to SF12BW125
581 581  
582 -The battery is designed to last for several years depends on the actually use environment and update interval. 
590 +867.9 - SF7BW125 to SF12BW125
583 583  
592 +868.8 - FSK
584 584  
585 -The battery related documents as below:
586 586  
587 -* [[Battery Dimension>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
588 -* [[Lithium-Thionyl Chloride Battery>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]][[ datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
589 -* [[Lithium-ion Battery-Capacitor datasheet>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
595 +(% style="color:#037691" %)** Downlink:**
590 590  
597 +Uplink channels 1-9 (RX1)
598 +
599 +869.525 - SF9BW125 (RX2 downlink only)
600 +
601 +
602 +
603 +=== 2.7.2 US902-928(US915) ===
604 +
605 +Used in USA, Canada and South America. Default use CHE=2
606 +
607 +(% style="color:#037691" %)**Uplink:**
608 +
609 +903.9 - SF7BW125 to SF10BW125
610 +
611 +904.1 - SF7BW125 to SF10BW125
612 +
613 +904.3 - SF7BW125 to SF10BW125
614 +
615 +904.5 - SF7BW125 to SF10BW125
616 +
617 +904.7 - SF7BW125 to SF10BW125
618 +
619 +904.9 - SF7BW125 to SF10BW125
620 +
621 +905.1 - SF7BW125 to SF10BW125
622 +
623 +905.3 - SF7BW125 to SF10BW125
624 +
625 +
626 +(% style="color:#037691" %)**Downlink:**
627 +
628 +923.3 - SF7BW500 to SF12BW500
629 +
630 +923.9 - SF7BW500 to SF12BW500
631 +
632 +924.5 - SF7BW500 to SF12BW500
633 +
634 +925.1 - SF7BW500 to SF12BW500
635 +
636 +925.7 - SF7BW500 to SF12BW500
637 +
638 +926.3 - SF7BW500 to SF12BW500
639 +
640 +926.9 - SF7BW500 to SF12BW500
641 +
642 +927.5 - SF7BW500 to SF12BW500
643 +
644 +923.3 - SF12BW500(RX2 downlink only)
645 +
646 +
647 +
648 +=== 2.7.3 CN470-510 (CN470) ===
649 +
650 +Used in China, Default use CHE=1
651 +
652 +(% style="color:#037691" %)**Uplink:**
653 +
654 +486.3 - SF7BW125 to SF12BW125
655 +
656 +486.5 - SF7BW125 to SF12BW125
657 +
658 +486.7 - SF7BW125 to SF12BW125
659 +
660 +486.9 - SF7BW125 to SF12BW125
661 +
662 +487.1 - SF7BW125 to SF12BW125
663 +
664 +487.3 - SF7BW125 to SF12BW125
665 +
666 +487.5 - SF7BW125 to SF12BW125
667 +
668 +487.7 - SF7BW125 to SF12BW125
669 +
670 +
671 +(% style="color:#037691" %)**Downlink:**
672 +
673 +506.7 - SF7BW125 to SF12BW125
674 +
675 +506.9 - SF7BW125 to SF12BW125
676 +
677 +507.1 - SF7BW125 to SF12BW125
678 +
679 +507.3 - SF7BW125 to SF12BW125
680 +
681 +507.5 - SF7BW125 to SF12BW125
682 +
683 +507.7 - SF7BW125 to SF12BW125
684 +
685 +507.9 - SF7BW125 to SF12BW125
686 +
687 +508.1 - SF7BW125 to SF12BW125
688 +
689 +505.3 - SF12BW125 (RX2 downlink only)
690 +
691 +
692 +
693 +=== 2.7.4 AU915-928(AU915) ===
694 +
695 +Default use CHE=2
696 +
697 +(% style="color:#037691" %)**Uplink:**
698 +
699 +916.8 - SF7BW125 to SF12BW125
700 +
701 +917.0 - SF7BW125 to SF12BW125
702 +
703 +917.2 - SF7BW125 to SF12BW125
704 +
705 +917.4 - SF7BW125 to SF12BW125
706 +
707 +917.6 - SF7BW125 to SF12BW125
708 +
709 +917.8 - SF7BW125 to SF12BW125
710 +
711 +918.0 - SF7BW125 to SF12BW125
712 +
713 +918.2 - SF7BW125 to SF12BW125
714 +
715 +
716 +(% style="color:#037691" %)**Downlink:**
717 +
718 +923.3 - SF7BW500 to SF12BW500
719 +
720 +923.9 - SF7BW500 to SF12BW500
721 +
722 +924.5 - SF7BW500 to SF12BW500
723 +
724 +925.1 - SF7BW500 to SF12BW500
725 +
726 +925.7 - SF7BW500 to SF12BW500
727 +
728 +926.3 - SF7BW500 to SF12BW500
729 +
730 +926.9 - SF7BW500 to SF12BW500
731 +
732 +927.5 - SF7BW500 to SF12BW500
733 +
734 +923.3 - SF12BW500(RX2 downlink only)
735 +
736 +
737 +
738 +=== 2.7.5 AS920-923 & AS923-925 (AS923) ===
739 +
740 +(% style="color:#037691" %)**Default Uplink channel:**
741 +
742 +923.2 - SF7BW125 to SF10BW125
743 +
744 +923.4 - SF7BW125 to SF10BW125
745 +
746 +
747 +(% style="color:#037691" %)**Additional Uplink Channel**:
748 +
749 +(OTAA mode, channel added by JoinAccept message)
750 +
751 +(% style="color:#037691" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
752 +
753 +922.2 - SF7BW125 to SF10BW125
754 +
755 +922.4 - SF7BW125 to SF10BW125
756 +
757 +922.6 - SF7BW125 to SF10BW125
758 +
759 +922.8 - SF7BW125 to SF10BW125
760 +
761 +923.0 - SF7BW125 to SF10BW125
762 +
763 +922.0 - SF7BW125 to SF10BW125
764 +
765 +
766 +(% style="color:#037691" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
767 +
768 +923.6 - SF7BW125 to SF10BW125
769 +
770 +923.8 - SF7BW125 to SF10BW125
771 +
772 +924.0 - SF7BW125 to SF10BW125
773 +
774 +924.2 - SF7BW125 to SF10BW125
775 +
776 +924.4 - SF7BW125 to SF10BW125
777 +
778 +924.6 - SF7BW125 to SF10BW125
779 +
780 +
781 +(% style="color:#037691" %)** Downlink:**
782 +
783 +Uplink channels 1-8 (RX1)
784 +
785 +923.2 - SF10BW125 (RX2)
786 +
787 +
788 +
789 +=== 2.7.6 KR920-923 (KR920) ===
790 +
791 +Default channel:
792 +
793 +922.1 - SF7BW125 to SF12BW125
794 +
795 +922.3 - SF7BW125 to SF12BW125
796 +
797 +922.5 - SF7BW125 to SF12BW125
798 +
799 +
800 +(% style="color:#037691" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
801 +
802 +922.1 - SF7BW125 to SF12BW125
803 +
804 +922.3 - SF7BW125 to SF12BW125
805 +
806 +922.5 - SF7BW125 to SF12BW125
807 +
808 +922.7 - SF7BW125 to SF12BW125
809 +
810 +922.9 - SF7BW125 to SF12BW125
811 +
812 +923.1 - SF7BW125 to SF12BW125
813 +
814 +923.3 - SF7BW125 to SF12BW125
815 +
816 +
817 +(% style="color:#037691" %)**Downlink:**
818 +
819 +Uplink channels 1-7(RX1)
820 +
821 +921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
822 +
823 +
824 +
825 +=== 2.7.7 IN865-867 (IN865) ===
826 +
827 +(% style="color:#037691" %)** Uplink:**
828 +
829 +865.0625 - SF7BW125 to SF12BW125
830 +
831 +865.4025 - SF7BW125 to SF12BW125
832 +
833 +865.9850 - SF7BW125 to SF12BW125
834 +
835 +
836 +(% style="color:#037691" %) **Downlink:**
837 +
838 +Uplink channels 1-3 (RX1)
839 +
840 +866.550 - SF10BW125 (RX2)
841 +
842 +
843 +
844 +
845 +== 2.8 LED Indicator ==
846 +
847 +The LSE01 has an internal LED which is to show the status of different state.
848 +
849 +* Blink once when device power on.
850 +* Solid ON for 5 seconds once device successful Join the network.
851 +* Blink once when device transmit a packet.
852 +
853 +== 2.9 Installation in Soil ==
854 +
855 +**Measurement the soil surface**
856 +
857 +
858 +[[image:1654506634463-199.png]] ​
859 +
591 591  (((
592 -[[image:image-20220708140453-6.png]]
861 +(((
862 +Choose the proper measuring position. Avoid the probe to touch rocks or hard things. Split the surface soil according to the measured deep. Keep the measured as original density. Vertical insert the probe into the soil to be measured. Make sure not shake when inserting.
593 593  )))
864 +)))
594 594  
595 595  
596 596  
597 -=== 2.9.2  Power consumption Analyze ===
868 +[[image:1654506665940-119.png]]
598 598  
599 599  (((
600 -Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
871 +Dig a hole with diameter > 20CM.
601 601  )))
602 602  
874 +(((
875 +Horizontal insert the probe to the soil and fill the hole for long term measurement.
876 +)))
603 603  
878 +
879 +== 2.10 ​Firmware Change Log ==
880 +
604 604  (((
605 -Instruction to use as below:
882 +**Firmware download link:**
606 606  )))
607 607  
608 608  (((
609 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
886 +[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
610 610  )))
611 611  
889 +(((
890 +
891 +)))
612 612  
613 613  (((
614 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
894 +**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]
615 615  )))
616 616  
617 -* (((
618 -Product Model
897 +(((
898 +
619 619  )))
620 -* (((
621 -Uplink Interval
900 +
901 +(((
902 +**V1.0.**
622 622  )))
623 -* (((
624 -Working Mode
625 -)))
626 626  
627 627  (((
628 -And the Life expectation in difference case will be shown on the right.
906 +Release
629 629  )))
630 630  
631 -[[image:image-20220708141352-7.jpeg]]
632 632  
910 +== 2.11 ​Battery Analysis ==
633 633  
912 +=== 2.11.1 ​Battery Type ===
634 634  
635 -=== 2.9.3  ​Battery Note ===
914 +(((
915 +The LSE01 battery is a combination of a 4000mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
916 +)))
636 636  
637 637  (((
638 -The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
919 +The battery is designed to last for more than 5 years for the LSN50.
639 639  )))
640 640  
922 +(((
923 +(((
924 +The battery-related documents are as below:
925 +)))
926 +)))
641 641  
928 +* (((
929 +[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
930 +)))
931 +* (((
932 +[[Lithium-Thionyl Chloride Battery  datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
933 +)))
934 +* (((
935 +[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
936 +)))
642 642  
643 -=== 2.9.4  Replace the battery ===
938 + [[image:image-20220610172436-1.png]]
644 644  
940 +
941 +
942 +=== 2.11.2 ​Battery Note ===
943 +
645 645  (((
646 -The default battery pack of NSE01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
945 +The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
647 647  )))
648 648  
649 649  
650 650  
651 -= 3. ​ Access NB-IoT Module =
950 +=== 2.11.3 Replace the battery ===
652 652  
653 653  (((
654 -Users can directly access the AT command set of the NB-IoT module.
953 +If Battery is lower than 2.7v, user should replace the battery of LSE01.
655 655  )))
656 656  
657 657  (((
658 -The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
957 +You can change the battery in the LSE01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
659 659  )))
660 660  
661 -[[image:1657261278785-153.png]]
960 +(((
961 +The default battery pack of LSE01 includes a ER18505 plus super capacitor. If user can’t find this pack locally, they can find ER18505 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
962 +)))
662 662  
663 663  
664 664  
665 -= 4.  Using the AT Commands =
966 += 3. ​Using the AT Commands =
666 666  
667 -== 4.1  Access AT Commands ==
968 +== 3.1 Access AT Commands ==
668 668  
669 -See this link for detail: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/]]
670 670  
971 +LSE01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSE01 for using AT command, as below.
671 671  
672 -AT+<CMD>?  : Help on <CMD>
973 +[[image:1654501986557-872.png||height="391" width="800"]]
673 673  
674 -AT+<CMD>         : Run <CMD>
675 675  
676 -AT+<CMD>=<value> : Set the value
976 +Or if you have below board, use below connection:
677 677  
678 -AT+<CMD>=?  : Get the value
679 679  
979 +[[image:1654502005655-729.png||height="503" width="801"]]
680 680  
981 +
982 +
983 +In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSE01. LSE01 will output system info once power on as below:
984 +
985 +
986 + [[image:1654502050864-459.png||height="564" width="806"]]
987 +
988 +
989 +Below are the available commands, a more detailed AT Command manual can be found at [[AT Command Manual>>https://www.dropbox.com/sh/qr6vproz4z4kzjz/AAAD48h3OyWrU1hq_Cqm8jIwa?dl=0]]: [[https:~~/~~/www.dropbox.com/sh/qr6vproz4z4kzjz/AAAD48h3OyWrU1hq_Cqm8jIwa?dl=0>>https://www.dropbox.com/sh/qr6vproz4z4kzjz/AAAD48h3OyWrU1hq_Cqm8jIwa?dl=0]]
990 +
991 +
992 +(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>? **(%%) : Help on <CMD>
993 +
994 +(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD> **(%%) : Run <CMD>
995 +
996 +(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>=<value>**(%%) : Set the value
997 +
998 +(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>=?**(%%)  : Get the value
999 +
1000 +
681 681  (% style="color:#037691" %)**General Commands**(%%)      
682 682  
683 -AT  : Attention       
1003 +(% style="background-color:#dcdcdc" %)**AT**(%%)  : Attention       
684 684  
685 -AT?  : Short Help     
1005 +(% style="background-color:#dcdcdc" %)**AT?**(%%)  : Short Help     
686 686  
687 -ATZ  : MCU Reset    
1007 +(% style="background-color:#dcdcdc" %)**ATZ**(%%)  : MCU Reset    
688 688  
689 -AT+TDC  : Application Data Transmission Interval
1009 +(% style="background-color:#dcdcdc" %)**AT+TDC**(%%)  : Application Data Transmission Interval 
690 690  
691 -AT+CFG  : Print all configurations
692 692  
693 -AT+CFGMOD           : Working mode selection
1012 +(% style="color:#037691" %)**Keys, IDs and EUIs management**
694 694  
695 -AT+INTMOD            : Set the trigger interrupt mode
1014 +(% style="background-color:#dcdcdc" %)**AT+APPEUI**(%%)              : Application EUI      
696 696  
697 -AT+5VT  : Set extend the time of 5V power  
1016 +(% style="background-color:#dcdcdc" %)**AT+APPKEY**(%%)              : Application Key     
698 698  
699 -AT+PRO  : Choose agreement
1018 +(% style="background-color:#dcdcdc" %)**AT+APPSKEY**(%%)            : Application Session Key
700 700  
701 -AT+WEIGRE  : Get weight or set weight to 0
1020 +(% style="background-color:#dcdcdc" %)**AT+DADDR**(%%)              : Device Address     
702 702  
703 -AT+WEIGAP  : Get or Set the GapValue of weight
1022 +(% style="background-color:#dcdcdc" %)**AT+DEUI**(%%)                   : Device EUI     
704 704  
705 -AT+RXDL  : Extend the sending and receiving time
1024 +(% style="background-color:#dcdcdc" %)**AT+NWKID**(%%)               : Network ID (You can enter this command change only after successful network connection) 
706 706  
707 -AT+CNTFAC  : Get or set counting parameters
1026 +(% style="background-color:#dcdcdc" %)**AT+NWKSKEY**(%%)          : Network Session Key Joining and sending date on LoRa network  
708 708  
709 -AT+SERVADDR  : Server Address
1028 +(% style="background-color:#dcdcdc" %)**AT+CFM**(%%)  : Confirm Mode       
710 710  
1030 +(% style="background-color:#dcdcdc" %)**AT+CFS**(%%)                     : Confirm Status       
711 711  
712 -(% style="color:#037691" %)**COAP Management**      
1032 +(% style="background-color:#dcdcdc" %)**AT+JOIN**(%%)  : Join LoRa? Network       
713 713  
714 -AT+URI            : Resource parameters
1034 +(% style="background-color:#dcdcdc" %)**AT+NJM**(%%)  : LoRa? Network Join Mode    
715 715  
1036 +(% style="background-color:#dcdcdc" %)**AT+NJS**(%%)                     : LoRa? Network Join Status    
716 716  
717 -(% style="color:#037691" %)**UDP Management**
1038 +(% style="background-color:#dcdcdc" %)**AT+RECV**(%%)                  : Print Last Received Data in Raw Format
718 718  
719 -AT+CFM          : Upload confirmation mode (only valid for UDP)
1040 +(% style="background-color:#dcdcdc" %)**AT+RECVB**(%%)                : Print Last Received Data in Binary Format      
720 720  
1042 +(% style="background-color:#dcdcdc" %)**AT+SEND**(%%)                  : Send Text Data      
721 721  
722 -(% style="color:#037691" %)**MQTT Management**
1044 +(% style="background-color:#dcdcdc" %)**AT+SENB**(%%)                  : Send Hexadecimal Data
723 723  
724 -AT+CLIENT               : Get or Set MQTT client
725 725  
726 -AT+UNAME  : Get or Set MQTT Username
1047 +(% style="color:#037691" %)**LoRa Network Management**
727 727  
728 -AT+PWD                  : Get or Set MQTT password
1049 +(% style="background-color:#dcdcdc" %)**AT+ADR**(%%)          : Adaptive Rate
729 729  
730 -AT+PUBTOPIC  : Get or Set MQTT publish topic
1051 +(% style="background-color:#dcdcdc" %)**AT+CLASS**(%%)  : LoRa Class(Currently only support class A
731 731  
732 -AT+SUBTOPIC  : Get or Set MQTT subscription topic
1053 +(% style="background-color:#dcdcdc" %)**AT+DCS**(%%)  : Duty Cycle Setting 
733 733  
1055 +(% style="background-color:#dcdcdc" %)**AT+DR**(%%)  : Data Rate (Can Only be Modified after ADR=0)     
734 734  
735 -(% style="color:#037691" %)**Information**          
1057 +(% style="background-color:#dcdcdc" %)**AT+FCD**(%%)  : Frame Counter Downlink       
736 736  
737 -AT+FDR  : Factory Data Reset
1059 +(% style="background-color:#dcdcdc" %)**AT+FCU**(%%)  : Frame Counter Uplink   
738 738  
739 -AT+PWORD  : Serial Access Password
1061 +(% style="background-color:#dcdcdc" %)**AT+JN1DL**(%%)  : Join Accept Delay1
740 740  
1063 +(% style="background-color:#dcdcdc" %)**AT+JN2DL**(%%)  : Join Accept Delay2
741 741  
1065 +(% style="background-color:#dcdcdc" %)**AT+PNM**(%%)  : Public Network Mode   
742 742  
743 -= ​5.  FAQ =
1067 +(% style="background-color:#dcdcdc" %)**AT+RX1DL**(%%)  : Receive Delay1      
744 744  
745 -== 5.1 ​ How to Upgrade Firmware ==
1069 +(% style="background-color:#dcdcdc" %)**AT+RX2DL**(%%)  : Receive Delay2      
746 746  
1071 +(% style="background-color:#dcdcdc" %)**AT+RX2DR**(%%)  : Rx2 Window Data Rate 
747 747  
1073 +(% style="background-color:#dcdcdc" %)**AT+RX2FQ**(%%)  : Rx2 Window Frequency
1074 +
1075 +(% style="background-color:#dcdcdc" %)**AT+TXP**(%%)  : Transmit Power
1076 +
1077 +(% style="background-color:#dcdcdc" %)**AT+ MOD**(%%)  : Set work mode
1078 +
1079 +
1080 +(% style="color:#037691" %)**Information** 
1081 +
1082 +(% style="background-color:#dcdcdc" %)**AT+RSSI**(%%)           : RSSI of the Last Received Packet   
1083 +
1084 +(% style="background-color:#dcdcdc" %)**AT+SNR**(%%)           : SNR of the Last Received Packet   
1085 +
1086 +(% style="background-color:#dcdcdc" %)**AT+VER**(%%)           : Image Version and Frequency Band       
1087 +
1088 +(% style="background-color:#dcdcdc" %)**AT+FDR**(%%)           : Factory Data Reset
1089 +
1090 +(% style="background-color:#dcdcdc" %)**AT+PORT**(%%)  : Application Port    
1091 +
1092 +(% style="background-color:#dcdcdc" %)**AT+CHS**(%%)  : Get or Set Frequency (Unit: Hz) for Single Channel Mode
1093 +
1094 + (% style="background-color:#dcdcdc" %)**AT+CHE**(%%)  : Get or Set eight channels mode, Only for US915, AU915, CN470
1095 +
1096 +
1097 += ​4. FAQ =
1098 +
1099 +== 4.1 ​How to change the LoRa Frequency Bands/Region? ==
1100 +
748 748  (((
749 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
1102 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1103 +When downloading the images, choose the required image file for download. ​
750 750  )))
751 751  
752 752  (((
753 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
1107 +
754 754  )))
755 755  
756 756  (((
757 -(% style="color:red" %)Notice, NSE01 and LSE01 share the same mother board. They use the same connection and method to update.
1111 +How to set up LSE01 to work in 8 channel mode By default, the frequency bands US915, AU915, CN470 work in 72 frequencies. Many gateways are 8 channel gateways, and in this case, the OTAA join time and uplink schedule is long and unpredictable while the end node is hopping in 72 frequencies.
758 758  )))
759 759  
1114 +(((
1115 +
1116 +)))
760 760  
1118 +(((
1119 +You can configure the end node to work in 8 channel mode by using the AT+CHE command. The 500kHz channels are always included for OTAA.
1120 +)))
761 761  
762 -= 6.  Trouble Shooting =
1122 +(((
1123 +
1124 +)))
763 763  
764 -== 6.1  ​Connection problem when uploading firmware ==
1126 +(((
1127 +For example, in **US915** band, the frequency table is as below. By default, the end node will use all channels (0~~71) for OTAA Join process. After the OTAA Join, the end node will use these all channels (0~~71) to send uplink packets.
1128 +)))
765 765  
1130 +[[image:image-20220606154726-3.png]]
766 766  
767 -(% class="wikigeneratedid" %)
1132 +
1133 +When you use the TTN network, the US915 frequency bands use are:
1134 +
1135 +* 903.9 - SF7BW125 to SF10BW125
1136 +* 904.1 - SF7BW125 to SF10BW125
1137 +* 904.3 - SF7BW125 to SF10BW125
1138 +* 904.5 - SF7BW125 to SF10BW125
1139 +* 904.7 - SF7BW125 to SF10BW125
1140 +* 904.9 - SF7BW125 to SF10BW125
1141 +* 905.1 - SF7BW125 to SF10BW125
1142 +* 905.3 - SF7BW125 to SF10BW125
1143 +* 904.6 - SF8BW500
1144 +
768 768  (((
769 -(% style="font-size:14px" %)**Please see: **(%%)[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting||style="background-color: rgb(255, 255, 255); font-size: 14px;"]]
1146 +Because the end node is now hopping in 72 frequency, it makes it difficult for the devices to Join the TTN network and uplink data. To solve this issue, you can access the device via the AT commands and run:
1147 +
1148 +* (% style="color:#037691" %)**AT+CHE=2**
1149 +* (% style="color:#037691" %)**ATZ**
770 770  )))
771 771  
1152 +(((
1153 +
772 772  
1155 +to set the end node to work in 8 channel mode. The device will work in Channel 8-15 & 64-71 for OTAA, and channel 8-15 for Uplink.
1156 +)))
773 773  
774 -== 6.2  AT Command input doesn't work ==
1158 +(((
1159 +
1160 +)))
775 775  
776 776  (((
1163 +The **AU915** band is similar. Below are the AU915 Uplink Channels.
1164 +)))
1165 +
1166 +[[image:image-20220606154825-4.png]]
1167 +
1168 +
1169 +== 4.2 ​Can I calibrate LSE01 to different soil types? ==
1170 +
1171 +LSE01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/&file=Calibrate_to_other_Soil_20220605.pdf]].
1172 +
1173 +
1174 += 5. Trouble Shooting =
1175 +
1176 +== 5.1 ​Why I can't join TTN in US915 / AU915 bands? ==
1177 +
1178 +It is due to channel mapping. Please see the [[Eight Channel Mode>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H7.19EightChannelMode"]] section above for details.
1179 +
1180 +
1181 +== 5.2 AT Command input doesn't work ==
1182 +
1183 +(((
777 777  In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
778 778  )))
779 779  
780 780  
1188 +== 5.3 Device rejoin in at the second uplink packet ==
781 781  
782 -= 7. ​ Order Info =
1190 +(% style="color:#4f81bd" %)**Issue describe as below:**
783 783  
1192 +[[image:1654500909990-784.png]]
784 784  
785 -Part Number**:** (% style="color:#4f81bd" %)**NSE01**
786 786  
1195 +(% style="color:#4f81bd" %)**Cause for this issue:**
787 787  
1197 +(((
1198 +The fuse on LSE01 is not large enough, some of the soil probe require large current up to 5v 800mA, in a short pulse. When this happen, it cause the device reboot so user see rejoin.
1199 +)))
1200 +
1201 +
1202 +(% style="color:#4f81bd" %)**Solution: **
1203 +
1204 +All new shipped LSE01 after 2020-May-30 will have this to fix. For the customer who see this issue, please bypass the fuse as below:
1205 +
1206 +[[image:1654500929571-736.png||height="458" width="832"]]
1207 +
1208 +
1209 += 6. ​Order Info =
1210 +
1211 +
1212 +Part Number**:** (% style="color:#4f81bd" %)**LSE01-XX-YY**
1213 +
1214 +
1215 +(% style="color:#4f81bd" %)**XX**(%%)**:** The default frequency band
1216 +
1217 +* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1218 +* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1219 +* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
1220 +* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1221 +* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1222 +* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1223 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1224 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1225 +
1226 +(% style="color:#4f81bd" %)**YY**(%%)**: **Battery Option
1227 +
1228 +* (% style="color:red" %)**4**(%%): 4000mAh battery
1229 +* (% style="color:red" %)**8**(%%): 8500mAh battery
1230 +
788 788  (% class="wikigeneratedid" %)
789 789  (((
790 790  
... ... @@ -796,10 +796,6 @@
796 796  
797 797  
798 798  (% style="color:#037691" %)**Package Includes**:
799 -
800 -
801 -* NSE01 NB-IoT Sensor Node x 1
802 -* External antenna x 1
803 803  )))
804 804  
805 805  * (((
... ... @@ -810,20 +810,24 @@
810 810  
811 811  
812 812  (% style="color:#037691" %)**Dimension and weight**:
1252 +)))
813 813  
814 -
815 -* Size: 195 x 125 x 55 mm
816 -* Weight:   420g
1254 +* (((
1255 +Device Size: cm
817 817  )))
1257 +* (((
1258 +Device Weight: g
1259 +)))
1260 +* (((
1261 +Package Size / pcs : cm
1262 +)))
1263 +* (((
1264 +Weight / pcs : g
818 818  
819 -(((
820 820  
821 -
822 -
823 -
824 824  )))
825 825  
826 -= 9.  Support =
1269 += 8. Support =
827 827  
828 828  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
829 829  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1657259653666-883.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -344.4 KB
Content
1657260785982-288.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -138.2 KB
Content
1657261119050-993.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -126.1 KB
Content
1657261278785-153.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -126.1 KB
Content
image-20220708133731-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content
image-20220708140453-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -132.7 KB
Content
image-20220708141352-7.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -102.7 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0