Last modified by Mengting Qiu on 2024/04/02 16:44
<
From version < 57.2 >
edited by Xiaoling
on 2022/07/08 11:31
To version < 61.1 >
edited by Xiaoling
on 2022/07/08 14:13
>
Change comment: Uploaded new attachment "1657260785982-288.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -172,10 +172,10 @@
172 172  
173 173  In the PC, use below serial tool settings:
174 174  
175 -* Baud: (% style="color:green" %)**9600**
175 +* Baud:  (% style="color:green" %)**9600**
176 176  * Data bits:** (% style="color:green" %)8(%%)**
177 177  * Stop bits: (% style="color:green" %)**1**
178 -* Parity: (% style="color:green" %)**None**
178 +* Parity:  (% style="color:green" %)**None**
179 179  * Flow Control: (% style="color:green" %)**None**
180 180  
181 181  (((
... ... @@ -199,7 +199,6 @@
199 199  * (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%)~/~/ to set CoAP server address and port
200 200  * (% style="color:blue" %)**AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** (%%) ~/~/Set COAP resource path
201 201  
202 -
203 203  For parameter description, please refer to AT command set
204 204  
205 205  [[image:1657249793983-486.png]]
... ... @@ -220,11 +220,9 @@
220 220  * (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/ to set UDP server address and port
221 221  * (% style="color:blue" %)**AT+CFM=1       ** (%%) ~/~/If the server does not respond, this command is unnecessary
222 222  
223 -
224 224  [[image:1657249864775-321.png]]
225 225  
226 226  
227 -
228 228  [[image:1657249930215-289.png]]
229 229  
230 230  
... ... @@ -242,7 +242,6 @@
242 242  * (% style="color:blue" %)**AT+PUBTOPIC=NSE01_PUB                    **(%%)~/~/Set the sending topic of MQTT
243 243  * (% style="color:blue" %)**AT+SUBTOPIC=NSE01_SUB          **(%%) ~/~/Set the subscription topic of MQTT
244 244  
245 -
246 246  [[image:1657249978444-674.png]]
247 247  
248 248  
... ... @@ -249,7 +249,6 @@
249 249  [[image:1657249990869-686.png]]
250 250  
251 251  
252 -
253 253  (((
254 254  MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
255 255  )))
... ... @@ -270,6 +270,7 @@
270 270  [[image:1657250255956-604.png]]
271 271  
272 272  
268 +
273 273  === 2.2.8 Change Update Interval ===
274 274  
275 275  User can use below command to change the (% style="color:green" %)**uplink interval**.
... ... @@ -294,7 +294,7 @@
294 294  |=(% style="width: 50px;" %)(((
295 295  **Size(bytes)**
296 296  )))|=(% style="width: 50px;" %)**6**|=(% style="width: 25px;" %)2|=(% style="width: 25px;" %)**2**|=(% style="width: 80px;" %)**1**|=(% style="width: 80px;" %)**2**|=(% style="width: 80px;" %)**2**|=(% style="width: 80px;" %)**2**|=(% style="width: 40px;" %)**1**
297 -|(% style="width:97px" %)**Value**|(% style="width:83px" %)[[Device ID>>path:#Device_ID]]|(% style="width:41px" %)[[Ver>>path:#Version]]|(% style="width:46px" %)[[BAT>>path:#battery]]|(% style="width:123px" %)[[Signal Strength>>path:#Signal]]|(% style="width:108px" %)[[Soil Moisture>>path:#Payload_Explain]]|(% style="width:133px" %)[[Soil Temperature>>path:#Payload_Explain]]|(% style="width:159px" %)[[Soil Conductivity(EC)>>path:#Payload_Explain]]|(% style="width:80px" %)[[Interrupt>>path:#Interrupt]]
293 +|(% style="width:97px" %)**Value**|(% style="width:83px" %)[[Device ID>>||anchor="H"]]|(% style="width:41px" %)[[Ver>>||anchor="H"]]|(% style="width:46px" %)[[BAT>>||anchor="H"]]|(% style="width:123px" %)[[Signal Strength>>||anchor="H"]]|(% style="width:108px" %)[[Soil Moisture>>||anchor="H"]]|(% style="width:133px" %)[[Soil Temperature>>||anchor="H"]]|(% style="width:159px" %)[[Soil Conductivity(EC)>>||anchor="H"]]|(% style="width:80px" %)[[Interrupt>>||anchor="H"]]
298 298  
299 299  If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NSE01 uplink data.
300 300  
... ... @@ -316,53 +316,32 @@
316 316  * Soil Conductivity(EC) = 0x02f9 =761 uS /cm
317 317  * Interrupt: 0x00 = 0
318 318  
315 +== 2.4  Payload Explanation and Sensor Interface ==
319 319  
320 320  
321 -=== 2.3.1 MOD~=0(Default Mode) ===
318 +=== 2.4.1  Device ID ===
322 322  
323 -LSE01 will uplink payload via LoRaWAN with below payload format: 
320 +By default, the Device ID equal to the last 6 bytes of IMEI.
324 324  
325 -(((
326 -Uplink payload includes in total 11 bytes.
327 -)))
322 +User can use (% style="color:blue" %)**AT+DEUI**(%%) to set Device ID
328 328  
329 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:500px" %)
330 -|(((
331 -**Size**
324 +**Example:**
332 332  
333 -**(bytes)**
334 -)))|**2**|**2**|**2**|**2**|**2**|**1**
335 -|**Value**|[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(((
336 -Temperature
326 +AT+DEUI=A84041F15612
337 337  
338 -(Reserve, Ignore now)
339 -)))|[[Soil Moisture>>||anchor="H2.3.4SoilMoisture"]]|[[Soil Temperature>>||anchor="H2.3.5SoilTemperature"]]|[[Soil Conductivity (EC)>>||anchor="H2.3.6SoilConductivity28EC29"]]|(((
340 -MOD & Digital Interrupt
328 +The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
341 341  
342 -(Optional)
343 -)))
344 344  
345 -=== 2.3.2 MOD~=1(Original value) ===
346 346  
347 -This mode can get the original AD value of moisture and original conductivity (with temperature drift compensation).
332 +=== 2.4.2  Version Info ===
348 348  
349 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:500px" %)
350 -|(((
351 -**Size**
334 +Specify the software version: 0x64=100, means firmware version 1.00.
352 352  
353 -**(bytes)**
354 -)))|**2**|**2**|**2**|**2**|**2**|**1**
355 -|**Value**|[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(((
356 -Temperature
336 +For example: 0x00 64 : this device is NSE01 with firmware version 1.0.0.
357 357  
358 -(Reserve, Ignore now)
359 -)))|[[Soil Moisture>>||anchor="H2.3.4SoilMoisture"]](raw)|[[Soil Temperature>>||anchor="H2.3.5SoilTemperature"]]|[[Soil Conductivity (EC)>>||anchor="H2.3.6SoilConductivity28EC29"]](raw)|(((
360 -MOD & Digital Interrupt
361 361  
362 -(Optional)
363 -)))
364 364  
365 -=== 2.3.3 Battery Info ===
340 +=== 2.4.3  Battery Info ===
366 366  
367 367  (((
368 368  Check the battery voltage for LSE01.
... ... @@ -378,14 +378,32 @@
378 378  
379 379  
380 380  
381 -=== 2.3.4 Soil Moisture ===
356 +=== 2.4.4  Signal Strength ===
382 382  
358 +NB-IoT Network signal Strength.
359 +
360 +**Ex1: 0x1d = 29**
361 +
362 +(% style="color:blue" %)**0**(%%)  -113dBm or less
363 +
364 +(% style="color:blue" %)**1**(%%)  -111dBm
365 +
366 +(% style="color:blue" %)**2...30**(%%) -109dBm... -53dBm
367 +
368 +(% style="color:blue" %)**31**  (%%) -51dBm or greater
369 +
370 +(% style="color:blue" %)**99**   (%%) Not known or not detectable
371 +
372 +
373 +
374 +=== 2.4.5  Soil Moisture ===
375 +
383 383  (((
384 384  Get the moisture content of the soil. The value range of the register is 0-10000(Decimal), divide this value by 100 to get the percentage of moisture in the soil.
385 385  )))
386 386  
387 387  (((
388 -For example, if the data you get from the register is __0x05 0xDC__, the moisture content in the soil is
381 +For example, if the data you get from the register is **__0x05 0xDC__**, the moisture content in the soil is
389 389  )))
390 390  
391 391  (((
... ... @@ -398,10 +398,10 @@
398 398  
399 399  
400 400  
401 -=== 2.3.5 Soil Temperature ===
394 +=== 2.4.6  Soil Temperature ===
402 402  
403 403  (((
404 - Get the temperature in the soil. The value range of the register is -4000 - +800(Decimal), divide this value by 100 to get the temperature in the soil. For example, if the data you get from the register is 0x09 0xEC, the temperature content in the soil is
397 + Get the temperature in the soil. The value range of the register is -4000 - +800(Decimal), divide this value by 100 to get the temperature in the soil. For example, if the data you get from the register is __**0x09 0xEC**__, the temperature content in the soil is
405 405  )))
406 406  
407 407  (((
... ... @@ -418,7 +418,7 @@
418 418  
419 419  
420 420  
421 -=== 2.3.6 Soil Conductivity (EC) ===
414 +=== 2.4.7  Soil Conductivity (EC) ===
422 422  
423 423  (((
424 424  Obtain (% style="color:#4f81bd" %)**__soluble salt concentration__**(%%) in soil or (% style="color:#4f81bd" %)**__soluble ion concentration in liquid fertilizer__**(%%) or (% style="color:#4f81bd" %)**__planting medium__**(%%). The value range of the register is 0 - 20000(Decimal)( Can be greater than 20000).
... ... @@ -425,7 +425,7 @@
425 425  )))
426 426  
427 427  (((
428 -For example, if the data you get from the register is 0x00 0xC8, the soil conductivity is 00C8(H) = 200(D) = 200 uS/cm.
421 +For example, if the data you get from the register is __**0x00 0xC8**__, the soil conductivity is 00C8(H) = 200(D) = 200 uS/cm.
429 429  )))
430 430  
431 431  (((
... ... @@ -440,50 +440,45 @@
440 440  
441 441  )))
442 442  
443 -=== 2.3.7 MOD ===
436 +=== 2.4.8  Digital Interrupt ===
444 444  
445 -Firmware version at least v2.1 supports changing mode.
438 +Digital Interrupt refers to pin (% style="color:blue" %)**GPIO_EXTI**(%%), and there are different trigger methods. When there is a trigger, the NSE01 will send a packet to the server.
446 446  
447 -For example, bytes[10]=90
440 +The command is:
448 448  
449 -mod=(bytes[10]>>7)&0x01=1.
442 +(% style="color:blue" %)**AT+INTMOD=3 **(%%) ~/~/(more info about INMOD please refer [[**AT Command Manual**>>url:https://www.dragino.com/downloads/downloads/NB-IoT/NBSN95/DRAGINO_NBSN95-NB_AT%20Commands_v1.1.0.pdf]])**.**
450 450  
451 451  
452 -**Downlink Command:**
445 +The lower four bits of this data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H"]] for the hardware and software set up.
453 453  
454 -If payload = 0x0A00, workmode=0
455 455  
456 -If** **payload =** **0x0A01, workmode=1
448 +Example:
457 457  
450 +0x(00): Normal uplink packet.
458 458  
452 +0x(01): Interrupt Uplink Packet.
459 459  
460 -=== 2.3.8 ​Decode payload in The Things Network ===
461 461  
462 -While using TTN network, you can add the payload format to decode the payload.
463 463  
456 +=== 2.4.9  ​+5V Output ===
464 464  
465 -[[image:1654505570700-128.png]]
458 +NSE01 will enable +5V output before all sampling and disable the +5v after all sampling. 
466 466  
467 -(((
468 -The payload decoder function for TTN is here:
469 -)))
470 470  
471 -(((
472 -LSE01 TTN Payload Decoder: [[https:~~/~~/www.dropbox.com/sh/si8icbrjlamxqdb/AAACYwjsxxr5fj_vpqRtrETAa?dl=0>>https://www.dropbox.com/sh/si8icbrjlamxqdb/AAACYwjsxxr5fj_vpqRtrETAa?dl=0]]
473 -)))
461 +The 5V output time can be controlled by AT Command.
474 474  
463 +(% style="color:blue" %)**AT+5VT=1000**
475 475  
476 -== 2.4 Uplink Interval ==
465 +Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
477 477  
478 -The LSE01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
479 479  
480 480  
469 +== 2.5  Downlink Payload ==
481 481  
482 -== 2.5 Downlink Payload ==
471 +By default, NSE01 prints the downlink payload to console port.
483 483  
484 -By default, LSE50 prints the downlink payload to console port.
473 +[[image:image-20220708133731-5.png]]
485 485  
486 -[[image:image-20220606165544-8.png]]
487 487  
488 488  
489 489  (((
... ... @@ -499,7 +499,7 @@
499 499  )))
500 500  
501 501  (((
502 -If the payload=0100003C, it means set the END Node’s TDC to 0x00003C=60(S), while type code is 01.
490 +If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
503 503  )))
504 504  
505 505  (((
... ... @@ -519,454 +519,131 @@
519 519  )))
520 520  
521 521  (((
522 -If payload = 0x04FF, it will reset the LSE01
510 +If payload = 0x04FF, it will reset the NSE01
523 523  )))
524 524  
525 525  
526 -* (% style="color:blue" %)**CFM**
514 +* (% style="color:blue" %)**INTMOD**
527 527  
528 -Downlink Payload: 05000001, Set AT+CFM=1 or 05000000 , set AT+CFM=0
516 +Downlink Payload: 06000003, Set AT+INTMOD=3
529 529  
530 530  
531 531  
532 -== 2.6 ​Show Data in DataCake IoT Server ==
520 +== 2.6  ​LED Indicator ==
533 533  
534 534  (((
535 -[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
536 -)))
523 +The NSE01 has an internal LED which is to show the status of different state.
537 537  
538 -(((
539 -
540 -)))
541 541  
542 -(((
543 -(% style="color:blue" %)**Step 1**(%%):  Be sure that your device is programmed and properly connected to the network at this time.
526 +* When power on, NSE01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
527 +* Then the LED will be on for 1 second means device is boot normally.
528 +* After NSE01 join NB-IoT network. The LED will be ON for 3 seconds.
529 +* For each uplink probe, LED will be on for 500ms.
544 544  )))
545 545  
546 -(((
547 -(% style="color:blue" %)**Step 2**(%%):  To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
548 -)))
549 549  
550 550  
551 -[[image:1654505857935-743.png]]
552 552  
535 +== 2.7  Installation in Soil ==
553 553  
554 -[[image:1654505874829-548.png]]
537 +__**Measurement the soil surface**__
555 555  
539 +Choose the proper measuring position. Avoid the probe to touch rocks or hard things. Split the surface soil according to the measured deep. Keep the measured as original density. Vertical insert the probe into the soil to be measured. Make sure not shake when inserting. [[https:~~/~~/img.alicdn.com/imgextra/i3/2005165265/O1CN010rj9Oh1olPsQxrdUK_!!2005165265.jpg>>url:https://img.alicdn.com/imgextra/i3/2005165265/O1CN010rj9Oh1olPsQxrdUK_!!2005165265.jpg]]
556 556  
557 -(% style="color:blue" %)**Step 3**(%%)**:**  Create an account or log in Datacake.
541 +[[image:1657259653666-883.png]] ​
558 558  
559 -(% style="color:blue" %)**Step 4**(%%)**:**  Search the LSE01 and add DevEUI.
560 560  
544 +(((
545 +
561 561  
562 -[[image:1654505905236-553.png]]
547 +(((
548 +Dig a hole with diameter > 20CM.
549 +)))
563 563  
551 +(((
552 +Horizontal insert the probe to the soil and fill the hole for long term measurement.
553 +)))
554 +)))
564 564  
565 -After added, the sensor data arrive TTN, it will also arrive and show in Mydevices.
556 +[[image:1654506665940-119.png]]
566 566  
567 -[[image:1654505925508-181.png]]
558 +(((
559 +
560 +)))
568 568  
569 569  
563 +== 2.8  ​Firmware Change Log ==
570 570  
571 -== 2.7 Frequency Plans ==
572 572  
573 -The LSE01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
566 +Download URL & Firmware Change log
574 574  
568 +[[www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/Firmware/]]
575 575  
576 -=== 2.7.1 EU863-870 (EU868) ===
577 577  
578 -(% style="color:#037691" %)** Uplink:**
571 +Upgrade Instruction: [[Upgrade_Firmware>>||anchor="H"]]
579 579  
580 -868.1 - SF7BW125 to SF12BW125
581 581  
582 -868.3 - SF7BW125 to SF12BW125 and SF7BW250
583 583  
584 -868.5 - SF7BW125 to SF12BW125
575 +== 2.9  ​Battery Analysis ==
585 585  
586 -867.1 - SF7BW125 to SF12BW125
577 +=== 2.9.1  ​Battery Type ===
587 587  
588 -867.3 - SF7BW125 to SF12BW125
589 589  
590 -867.5 - SF7BW125 to SF12BW125
580 +The NSE01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
591 591  
592 -867.7 - SF7BW125 to SF12BW125
593 593  
594 -867.9 - SF7BW125 to SF12BW125
583 +The battery is designed to last for several years depends on the actually use environment and update interval.
595 595  
596 -868.8 - FSK
597 597  
586 +The battery related documents as below:
598 598  
599 -(% style="color:#037691" %)** Downlink:**
588 +* [[Battery Dimension>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
589 +* [[Lithium-Thionyl Chloride Battery>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]][[ datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
590 +* [[Lithium-ion Battery-Capacitor datasheet>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
600 600  
601 -Uplink channels 1-9 (RX1)
602 -
603 -869.525 - SF9BW125 (RX2 downlink only)
604 -
605 -
606 -
607 -=== 2.7.2 US902-928(US915) ===
608 -
609 -Used in USA, Canada and South America. Default use CHE=2
610 -
611 -(% style="color:#037691" %)**Uplink:**
612 -
613 -903.9 - SF7BW125 to SF10BW125
614 -
615 -904.1 - SF7BW125 to SF10BW125
616 -
617 -904.3 - SF7BW125 to SF10BW125
618 -
619 -904.5 - SF7BW125 to SF10BW125
620 -
621 -904.7 - SF7BW125 to SF10BW125
622 -
623 -904.9 - SF7BW125 to SF10BW125
624 -
625 -905.1 - SF7BW125 to SF10BW125
626 -
627 -905.3 - SF7BW125 to SF10BW125
628 -
629 -
630 -(% style="color:#037691" %)**Downlink:**
631 -
632 -923.3 - SF7BW500 to SF12BW500
633 -
634 -923.9 - SF7BW500 to SF12BW500
635 -
636 -924.5 - SF7BW500 to SF12BW500
637 -
638 -925.1 - SF7BW500 to SF12BW500
639 -
640 -925.7 - SF7BW500 to SF12BW500
641 -
642 -926.3 - SF7BW500 to SF12BW500
643 -
644 -926.9 - SF7BW500 to SF12BW500
645 -
646 -927.5 - SF7BW500 to SF12BW500
647 -
648 -923.3 - SF12BW500(RX2 downlink only)
649 -
650 -
651 -
652 -=== 2.7.3 CN470-510 (CN470) ===
653 -
654 -Used in China, Default use CHE=1
655 -
656 -(% style="color:#037691" %)**Uplink:**
657 -
658 -486.3 - SF7BW125 to SF12BW125
659 -
660 -486.5 - SF7BW125 to SF12BW125
661 -
662 -486.7 - SF7BW125 to SF12BW125
663 -
664 -486.9 - SF7BW125 to SF12BW125
665 -
666 -487.1 - SF7BW125 to SF12BW125
667 -
668 -487.3 - SF7BW125 to SF12BW125
669 -
670 -487.5 - SF7BW125 to SF12BW125
671 -
672 -487.7 - SF7BW125 to SF12BW125
673 -
674 -
675 -(% style="color:#037691" %)**Downlink:**
676 -
677 -506.7 - SF7BW125 to SF12BW125
678 -
679 -506.9 - SF7BW125 to SF12BW125
680 -
681 -507.1 - SF7BW125 to SF12BW125
682 -
683 -507.3 - SF7BW125 to SF12BW125
684 -
685 -507.5 - SF7BW125 to SF12BW125
686 -
687 -507.7 - SF7BW125 to SF12BW125
688 -
689 -507.9 - SF7BW125 to SF12BW125
690 -
691 -508.1 - SF7BW125 to SF12BW125
692 -
693 -505.3 - SF12BW125 (RX2 downlink only)
694 -
695 -
696 -
697 -=== 2.7.4 AU915-928(AU915) ===
698 -
699 -Default use CHE=2
700 -
701 -(% style="color:#037691" %)**Uplink:**
702 -
703 -916.8 - SF7BW125 to SF12BW125
704 -
705 -917.0 - SF7BW125 to SF12BW125
706 -
707 -917.2 - SF7BW125 to SF12BW125
708 -
709 -917.4 - SF7BW125 to SF12BW125
710 -
711 -917.6 - SF7BW125 to SF12BW125
712 -
713 -917.8 - SF7BW125 to SF12BW125
714 -
715 -918.0 - SF7BW125 to SF12BW125
716 -
717 -918.2 - SF7BW125 to SF12BW125
718 -
719 -
720 -(% style="color:#037691" %)**Downlink:**
721 -
722 -923.3 - SF7BW500 to SF12BW500
723 -
724 -923.9 - SF7BW500 to SF12BW500
725 -
726 -924.5 - SF7BW500 to SF12BW500
727 -
728 -925.1 - SF7BW500 to SF12BW500
729 -
730 -925.7 - SF7BW500 to SF12BW500
731 -
732 -926.3 - SF7BW500 to SF12BW500
733 -
734 -926.9 - SF7BW500 to SF12BW500
735 -
736 -927.5 - SF7BW500 to SF12BW500
737 -
738 -923.3 - SF12BW500(RX2 downlink only)
739 -
740 -
741 -
742 -=== 2.7.5 AS920-923 & AS923-925 (AS923) ===
743 -
744 -(% style="color:#037691" %)**Default Uplink channel:**
745 -
746 -923.2 - SF7BW125 to SF10BW125
747 -
748 -923.4 - SF7BW125 to SF10BW125
749 -
750 -
751 -(% style="color:#037691" %)**Additional Uplink Channel**:
752 -
753 -(OTAA mode, channel added by JoinAccept message)
754 -
755 -(% style="color:#037691" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
756 -
757 -922.2 - SF7BW125 to SF10BW125
758 -
759 -922.4 - SF7BW125 to SF10BW125
760 -
761 -922.6 - SF7BW125 to SF10BW125
762 -
763 -922.8 - SF7BW125 to SF10BW125
764 -
765 -923.0 - SF7BW125 to SF10BW125
766 -
767 -922.0 - SF7BW125 to SF10BW125
768 -
769 -
770 -(% style="color:#037691" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
771 -
772 -923.6 - SF7BW125 to SF10BW125
773 -
774 -923.8 - SF7BW125 to SF10BW125
775 -
776 -924.0 - SF7BW125 to SF10BW125
777 -
778 -924.2 - SF7BW125 to SF10BW125
779 -
780 -924.4 - SF7BW125 to SF10BW125
781 -
782 -924.6 - SF7BW125 to SF10BW125
783 -
784 -
785 -(% style="color:#037691" %)** Downlink:**
786 -
787 -Uplink channels 1-8 (RX1)
788 -
789 -923.2 - SF10BW125 (RX2)
790 -
791 -
792 -
793 -=== 2.7.6 KR920-923 (KR920) ===
794 -
795 -Default channel:
796 -
797 -922.1 - SF7BW125 to SF12BW125
798 -
799 -922.3 - SF7BW125 to SF12BW125
800 -
801 -922.5 - SF7BW125 to SF12BW125
802 -
803 -
804 -(% style="color:#037691" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
805 -
806 -922.1 - SF7BW125 to SF12BW125
807 -
808 -922.3 - SF7BW125 to SF12BW125
809 -
810 -922.5 - SF7BW125 to SF12BW125
811 -
812 -922.7 - SF7BW125 to SF12BW125
813 -
814 -922.9 - SF7BW125 to SF12BW125
815 -
816 -923.1 - SF7BW125 to SF12BW125
817 -
818 -923.3 - SF7BW125 to SF12BW125
819 -
820 -
821 -(% style="color:#037691" %)**Downlink:**
822 -
823 -Uplink channels 1-7(RX1)
824 -
825 -921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
826 -
827 -
828 -
829 -=== 2.7.7 IN865-867 (IN865) ===
830 -
831 -(% style="color:#037691" %)** Uplink:**
832 -
833 -865.0625 - SF7BW125 to SF12BW125
834 -
835 -865.4025 - SF7BW125 to SF12BW125
836 -
837 -865.9850 - SF7BW125 to SF12BW125
838 -
839 -
840 -(% style="color:#037691" %) **Downlink:**
841 -
842 -Uplink channels 1-3 (RX1)
843 -
844 -866.550 - SF10BW125 (RX2)
845 -
846 -
847 -
848 -
849 -== 2.8 LED Indicator ==
850 -
851 -The LSE01 has an internal LED which is to show the status of different state.
852 -
853 -* Blink once when device power on.
854 -* Solid ON for 5 seconds once device successful Join the network.
855 -* Blink once when device transmit a packet.
856 -
857 -== 2.9 Installation in Soil ==
858 -
859 -**Measurement the soil surface**
860 -
861 -
862 -[[image:1654506634463-199.png]] ​
863 -
864 864  (((
865 -(((
866 -Choose the proper measuring position. Avoid the probe to touch rocks or hard things. Split the surface soil according to the measured deep. Keep the measured as original density. Vertical insert the probe into the soil to be measured. Make sure not shake when inserting.
593 +[[image:image-20220708140453-6.png]]
867 867  )))
868 -)))
869 869  
870 870  
871 871  
872 -[[image:1654506665940-119.png]]
598 +2.9.2 
873 873  
874 -(((
875 -Dig a hole with diameter > 20CM.
876 -)))
600 +Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
877 877  
878 -(((
879 -Horizontal insert the probe to the soil and fill the hole for long term measurement.
880 -)))
881 881  
603 +Instruction to use as below:
882 882  
883 -== 2.10 ​Firmware Change Log ==
884 884  
885 -(((
886 -**Firmware download link:**
887 -)))
606 +Step 1: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
888 888  
889 -(((
890 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
891 -)))
608 +[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
892 892  
893 -(((
894 -
895 -)))
896 896  
897 -(((
898 -**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]
899 -)))
611 +Step 2: Open it and choose
900 900  
901 -(((
902 -
903 -)))
613 +* Product Model
614 +* Uplink Interval
615 +* Working Mode
904 904  
905 -(((
906 -**V1.0.**
907 -)))
617 +And the Life expectation in difference case will be shown on the right.
908 908  
909 -(((
910 -Release
911 -)))
912 912  
913 913  
914 -== 2.11 ​Battery Analysis ==
621 +=== 2.9.3  ​Battery Note ===
915 915  
916 -=== 2.11.1 ​Battery Type ===
917 -
918 918  (((
919 -The LSE01 battery is a combination of a 4000mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
920 -)))
921 -
922 -(((
923 -The battery is designed to last for more than 5 years for the LSN50.
924 -)))
925 -
926 -(((
927 -(((
928 -The battery-related documents are as below:
929 -)))
930 -)))
931 -
932 -* (((
933 -[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
934 -)))
935 -* (((
936 -[[Lithium-Thionyl Chloride Battery  datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
937 -)))
938 -* (((
939 -[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
940 -)))
941 -
942 - [[image:image-20220610172436-1.png]]
943 -
944 -
945 -
946 -=== 2.11.2 ​Battery Note ===
947 -
948 -(((
949 949  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
950 950  )))
951 951  
952 952  
953 953  
954 -=== 2.11.3 Replace the battery ===
629 +=== 2.9.4  Replace the battery ===
955 955  
956 -(((
957 -If Battery is lower than 2.7v, user should replace the battery of LSE01.
958 -)))
631 +The default battery pack of NSE01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
959 959  
960 -(((
961 -You can change the battery in the LSE01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
962 -)))
963 963  
964 -(((
965 -The default battery pack of LSE01 includes a ER18505 plus super capacitor. If user can’t find this pack locally, they can find ER18505 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
966 -)))
967 967  
968 -
969 -
970 970  = 3. ​Using the AT Commands =
971 971  
972 972  == 3.1 Access AT Commands ==
1657259653666-883.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +344.4 KB
Content
1657260785982-288.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +138.2 KB
Content
image-20220708133731-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +8.7 KB
Content
image-20220708140453-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +132.7 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0