Skip to Content
Last modified by Mengting Qiu on 2024/04/02 16:44
From version 40.3
edited by Xiaoling
on 2022/06/30 10:41
Change comment: There is no comment for this version
To version 80.1
edited by Xiaoling
on 2022/07/09 09:20
Change comment: Uploaded new attachment "image-20220709092052-2.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LSE01-LoRaWAN Soil Moisture & EC Sensor User Manual
1 +NDDS75 NB-IoT Distance Detect Sensor User Manual
Content
... ... @@ -1,19 +1,12 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20220606151504-2.jpeg||height="554" width="554"]]
2 +[[image:image-20220709085040-1.png||height="542" width="524"]]
3 3  
4 4  
5 5  
6 6  
7 7  
8 -
9 -
10 -
11 -
12 -
13 -
14 14  **Table of Contents:**
15 15  
16 -{{toc/}}
17 17  
18 18  
19 19  
... ... @@ -20,774 +20,719 @@
20 20  
21 21  
22 22  
23 -= 1. Introduction =
16 += 1.  Introduction =
24 24  
25 -== 1.1 ​What is LoRaWAN Soil Moisture & EC Sensor ==
18 +== 1.1 ​ What is NDDS75 Distance Detection Sensor ==
26 26  
27 27  (((
28 28  
29 29  
30 -The Dragino LSE01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil Moisture & EC Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity. It also has been calibrated in factory for Mineral soil type.
31 -)))
32 -
33 33  (((
34 -It detects (% style="color:#4f81bd" %)**Soil Moisture**(%%), (% style="color:#4f81bd" %)**Soil Temperature**(%%) and (% style="color:#4f81bd" %)**Soil Conductivity**(%%), and uploads the value via wireless to LoRaWAN IoT Server.
24 +The Dragino NDDS75 is a (% style="color:blue" %)**NB-IoT Distance Detection Sensor**(%%) for Internet of Things solution. It is designed to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.
25 +\\The NDDS75 can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc. It detects the distance between the measured object and the sensor, and uploads the value via wireless to IoT Server via NB-IoT Network.
26 +\\NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
27 +\\NDDS75 supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP and CoAP** (%%)for different application requirement.
28 +\\NDDS75 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
29 +\\To use NDDS75, user needs to check if there is NB-IoT coverage in local area and with the bands NDDS75 supports. If the local operate support it, user needs to get a NB-IoT SIM card from local operator and install NDDS75 to get NB-IoT network connection.
35 35  )))
36 36  
37 -(((
38 -The LoRa wireless technology used in LES01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
32 +
39 39  )))
40 40  
41 -(((
42 -LES01 is powered by (% style="color:#4f81bd" %)**4000mA or 8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 10 years.
43 -)))
44 -
45 -(((
46 -Each LES01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
47 -)))
48 -
49 -
50 50  [[image:1654503236291-817.png]]
51 51  
52 52  
53 -[[image:1654503265560-120.png]]
38 +[[image:1657327959271-447.png]]
54 54  
55 55  
56 56  
57 -== 1.2 ​Features ==
42 +== 1.2 ​ Features ==
58 58  
59 -* LoRaWAN 1.0.3 Class A
44 +
45 +* NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
60 60  * Ultra low power consumption
61 -* Monitor Soil Moisture
62 -* Monitor Soil Temperature
63 -* Monitor Soil Conductivity
64 -* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
47 +* Distance Detection by Ultrasonic technology
48 +* Flat object range 280mm - 7500mm
49 +* Accuracy: ±(1cm+S*0.3%) (S: Distance)
50 +* Cable Length: 25cm
65 65  * AT Commands to change parameters
66 66  * Uplink on periodically
67 67  * Downlink to change configure
68 68  * IP66 Waterproof Enclosure
69 -* 4000mAh or 8500mAh Battery for long term use
55 +* Micro SIM card slot for NB-IoT SIM
56 +* 8500mAh Battery for long term use
70 70  
71 71  
72 72  
73 -== 1.3 Specification ==
60 +== 1.3  Specification ==
74 74  
75 -Measure Volume: Base on the centra pin of the probe, a cylinder with 7cm diameter and 10cm height.
76 76  
77 -[[image:image-20220606162220-5.png]]
63 +(% style="color:#037691" %)**Common DC Characteristics:**
78 78  
65 +* Supply Voltage: 2.1v ~~ 3.6v
66 +* Operating Temperature: -40 ~~ 85°C
79 79  
68 +(% style="color:#037691" %)**NB-IoT Spec:**
80 80  
81 -== ​1.4 Applications ==
70 +* - B1 @H-FDD: 2100MHz
71 +* - B3 @H-FDD: 1800MHz
72 +* - B8 @H-FDD: 900MHz
73 +* - B5 @H-FDD: 850MHz
74 +* - B20 @H-FDD: 800MHz
75 +* - B28 @H-FDD: 700MHz
82 82  
83 -* Smart Agriculture
84 84  
85 -(% class="wikigeneratedid" id="H200B1.5FirmwareChangelog" %)
86 -​
78 +(% style="color:#037691" %)**Battery:**
87 87  
88 -== 1.5 Firmware Change log ==
80 +* Li/SOCI2 un-chargeable battery
81 +* Capacity: 8500mAh
82 +* Self Discharge: <1% / Year @ 25°C
83 +* Max continuously current: 130mA
84 +* Max boost current: 2A, 1 second
89 89  
90 90  
91 -**LSE01 v1.0 :**  Release
87 +(% style="color:#037691" %)**Power Consumption**
92 92  
89 +* STOP Mode: 10uA @ 3.3v
90 +* Max transmit power: 350mA@3.3v
93 93  
94 94  
95 -= 2. Configure LSE01 to connect to LoRaWAN network =
96 96  
97 -== 2.1 How it works ==
98 98  
99 -(((
100 -The LSE01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSE0150. It will automatically join the network via OTAA and start to send the sensor value
101 -)))
95 +== ​1.4  Applications ==
102 102  
103 -(((
104 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H3.200BUsingtheATCommands"]].
105 -)))
97 +* Smart Buildings & Home Automation
98 +* Logistics and Supply Chain Management
99 +* Smart Metering
100 +* Smart Agriculture
101 +* Smart Cities
102 +* Smart Factory
106 106  
104 +(% class="wikigeneratedid" id="H200B1.5FirmwareChangelog" %)
105 +​
107 107  
108 108  
109 -== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
110 110  
111 -Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.
109 +== 1.5  Pin Definitions ==
112 112  
113 113  
114 -[[image:1654503992078-669.png]]
112 +[[image:1657328609906-564.png]]
115 115  
116 116  
117 -The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
118 118  
119 119  
120 -(% style="color:blue" %)**Step 1**(%%):  Create a device in TTN with the OTAA keys from LSE01.
117 += 2.  Use NSE01 to communicate with IoT Server =
121 121  
122 -Each LSE01 is shipped with a sticker with the default device EUI as below:
119 +== 2.1  How it works ==
123 123  
124 -[[image:image-20220606163732-6.jpeg]]
125 -
126 -You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
127 -
128 -**Add APP EUI in the application**
129 -
130 -
131 -[[image:1654504596150-405.png]]
132 -
133 -
134 -
135 -**Add APP KEY and DEV EUI**
136 -
137 -[[image:1654504683289-357.png]]
138 -
139 -
140 -
141 -(% style="color:blue" %)**Step 2**(%%): Power on LSE01
142 -
143 -
144 -Put a Jumper on JP2 to power on the device. ( The Jumper must be in FLASH position).
145 -
146 -[[image:image-20220606163915-7.png]]
147 -
148 -
149 -(% style="color:blue" %)**Step 3**(%%)**:** The LSE01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
150 -
151 -[[image:1654504778294-788.png]]
152 -
153 -
154 -
155 -== 2.3 Uplink Payload ==
156 -
157 -
158 -=== 2.3.1 MOD~=0(Default Mode) ===
159 -
160 -LSE01 will uplink payload via LoRaWAN with below payload format: 
161 -
162 162  (((
163 -Uplink payload includes in total 11 bytes.
122 +The NDDS75 is equipped with a NB-IoT module, the pre-loaded firmware in NDDS75 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by NDDS75.
164 164  )))
165 165  
166 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:500px" %)
167 -|(((
168 -**Size**
169 169  
170 -**(bytes)**
171 -)))|**2**|**2**|**2**|**2**|**2**|**1**
172 -|**Value**|[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(((
173 -Temperature
174 -
175 -(Reserve, Ignore now)
176 -)))|[[Soil Moisture>>||anchor="H2.3.4SoilMoisture"]]|[[Soil Temperature>>||anchor="H2.3.5SoilTemperature"]]|[[Soil Conductivity (EC)>>||anchor="H2.3.6SoilConductivity28EC29"]]|(((
177 -MOD & Digital Interrupt
178 -
179 -(Optional)
180 -)))
181 -
182 -
183 -
184 -=== 2.3.2 MOD~=1(Original value) ===
185 -
186 -This mode can get the original AD value of moisture and original conductivity (with temperature drift compensation).
187 -
188 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:500px" %)
189 -|(((
190 -**Size**
191 -
192 -**(bytes)**
193 -)))|**2**|**2**|**2**|**2**|**2**|**1**
194 -|**Value**|[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(((
195 -Temperature
196 -
197 -(Reserve, Ignore now)
198 -)))|[[Soil Moisture>>||anchor="H2.3.4SoilMoisture"]](raw)|[[Soil Temperature>>||anchor="H2.3.5SoilTemperature"]]|[[Soil Conductivity (EC)>>||anchor="H2.3.6SoilConductivity28EC29"]](raw)|(((
199 -MOD & Digital Interrupt
200 -
201 -(Optional)
202 -)))
203 -
204 -
205 -
206 -=== 2.3.3 Battery Info ===
207 -
208 208  (((
209 -Check the battery voltage for LSE01.
127 +The diagram below shows the working flow in default firmware of NDDS75:
210 210  )))
211 211  
212 212  (((
213 -Ex1: 0x0B45 = 2885mV
131 +
214 214  )))
215 215  
216 -(((
217 -Ex2: 0x0B49 = 2889mV
218 -)))
134 +[[image:1657328659945-416.png]]
219 219  
220 -
221 -
222 -=== 2.3.4 Soil Moisture ===
223 -
224 224  (((
225 -Get the moisture content of the soil. The value range of the register is 0-10000(Decimal), divide this value by 100 to get the percentage of moisture in the soil.
226 -)))
227 -
228 -(((
229 -For example, if the data you get from the register is __0x05 0xDC__, the moisture content in the soil is
230 -)))
231 -
232 -(((
233 233  
234 234  )))
235 235  
236 -(((
237 -(% style="color:#4f81bd" %)**05DC(H) = 1500(D) /100 = 15%.**
238 -)))
239 239  
141 +== 2.2 ​ Configure the NSE01 ==
240 240  
241 241  
242 -=== 2.3.5 Soil Temperature ===
144 +=== 2.2.1 Test Requirement ===
243 243  
244 -(((
245 - Get the temperature in the soil. The value range of the register is -4000 - +800(Decimal), divide this value by 100 to get the temperature in the soil. For example, if the data you get from the register is 0x09 0xEC, the temperature content in the soil is
246 -)))
247 247  
248 248  (((
249 -**Example**:
148 +To use NSE01 in your city, make sure meet below requirements:
250 250  )))
251 251  
252 -(((
253 -If payload is 0105H: ((0x0105 & 0x8000)>>15 === 0),temp = 0105(H)/100 = 2.61 °C
254 -)))
151 +* Your local operator has already distributed a NB-IoT Network there.
152 +* The local NB-IoT network used the band that NSE01 supports.
153 +* Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
255 255  
256 256  (((
257 -If payload is FF7EH: ((FF7E & 0x8000)>>15 ===1),temp = (FF7E(H)-FFFF(H))/100 = -1.29 °C
156 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NSE01 will use CoAP((% style="color:red" %)120.24.4.116:5683)(%%) or raw UDP((% style="color:red" %)120.24.4.116:5601)(%%) or MQTT((% style="color:red" %)120.24.4.116:1883)(%%)or TCP((% style="color:red" %)120.24.4.116:5600)(%%)protocol to send data to the test server
258 258  )))
259 259  
260 260  
160 +[[image:1657249419225-449.png]]
261 261  
262 -=== 2.3.6 Soil Conductivity (EC) ===
263 263  
264 -(((
265 -Obtain (% style="color:#4f81bd" %)**__soluble salt concentration__**(%%) in soil or (% style="color:#4f81bd" %)**__soluble ion concentration in liquid fertilizer__**(%%) or (% style="color:#4f81bd" %)**__planting medium__**(%%). The value range of the register is 0 - 20000(Decimal)( Can be greater than 20000).
266 -)))
267 267  
268 -(((
269 -For example, if the data you get from the register is 0x00 0xC8, the soil conductivity is 00C8(H) = 200(D) = 200 uS/cm.
270 -)))
164 +=== 2.2.2 Insert SIM card ===
271 271  
272 272  (((
273 -Generally, the EC value of irrigation water is less than 800uS / cm.
167 +Insert the NB-IoT Card get from your provider.
274 274  )))
275 275  
276 276  (((
277 -
171 +User need to take out the NB-IoT module and insert the SIM card like below:
278 278  )))
279 279  
280 -(((
281 -
282 -)))
283 283  
284 -=== 2.3.7 MOD ===
175 +[[image:1657249468462-536.png]]
285 285  
286 -Firmware version at least v2.1 supports changing mode.
287 287  
288 -For example, bytes[10]=90
289 289  
290 -mod=(bytes[10]>>7)&0x01=1.
179 +=== 2.2.3 Connect USB – TTL to NSE01 to configure it ===
291 291  
292 -
293 -**Downlink Command:**
294 -
295 -If payload = 0x0A00, workmode=0
296 -
297 -If** **payload =** **0x0A01, workmode=1
298 -
299 -
300 -
301 -=== 2.3.8 ​Decode payload in The Things Network ===
302 -
303 -While using TTN network, you can add the payload format to decode the payload.
304 -
305 -
306 -[[image:1654505570700-128.png]]
307 -
308 308  (((
309 -The payload decoder function for TTN is here:
310 -)))
311 -
312 312  (((
313 -LSE01 TTN Payload Decoder: [[https:~~/~~/www.dropbox.com/sh/si8icbrjlamxqdb/AAACYwjsxxr5fj_vpqRtrETAa?dl=0>>https://www.dropbox.com/sh/si8icbrjlamxqdb/AAACYwjsxxr5fj_vpqRtrETAa?dl=0]]
183 +User need to configure NSE01 via serial port to set the (% style="color:blue" %)**Server Address** / **Uplink Topic** (%%)to define where and how-to uplink packets. NSE01 support AT Commands, user can use a USB to TTL adapter to connect to NSE01 and use AT Commands to configure it, as below.
314 314  )))
185 +)))
315 315  
316 316  
317 -== 2.4 Uplink Interval ==
188 +**Connection:**
318 318  
319 -The LSE01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
190 + (% style="background-color:yellow" %)USB TTL GND <~-~-~-~-> GND
320 320  
192 + (% style="background-color:yellow" %)USB TTL TXD <~-~-~-~-> UART_RXD
321 321  
194 + (% style="background-color:yellow" %)USB TTL RXD <~-~-~-~-> UART_TXD
322 322  
323 -== 2.5 Downlink Payload ==
324 324  
325 -By default, LSE50 prints the downlink payload to console port.
197 +In the PC, use below serial tool settings:
326 326  
327 -[[image:image-20220606165544-8.png]]
199 +* Baud:  (% style="color:green" %)**9600**
200 +* Data bits:** (% style="color:green" %)8(%%)**
201 +* Stop bits: (% style="color:green" %)**1**
202 +* Parity:  (% style="color:green" %)**None**
203 +* Flow Control: (% style="color:green" %)**None**
328 328  
329 -
330 330  (((
331 -**Examples:**
206 +Make sure the switch is in FLASH position, then power on device by connecting the jumper on NSE01. NSE01 will output system info once power on as below, we can enter the (% style="color:green" %)**password: 12345678**(%%) to access AT Command input.
332 332  )))
333 333  
334 -(((
335 -
336 -)))
209 +[[image:image-20220708110657-3.png]]
337 337  
338 -* (((
339 -**Set TDC**
340 -)))
341 -
342 342  (((
343 -If the payload=0100003C, it means set the END Node’s TDC to 0x00003C=60(S), while type code is 01.
212 +(% style="color:red" %)Note: the valid AT Commands can be found at: (%%)[[http:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/]]
344 344  )))
345 345  
346 -(((
347 -Payload:    01 00 00 1E    TDC=30S
348 -)))
349 349  
350 -(((
351 -Payload:    01 00 00 3C    TDC=60S
352 -)))
353 353  
354 -(((
355 -
356 -)))
217 +=== 2.2.4 Use CoAP protocol to uplink data ===
357 357  
358 -* (((
359 -**Reset**
360 -)))
219 +(% style="color:red" %)Note: if you don't have CoAP server, you can refer this link to set up one: (%%)[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/>>http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
361 361  
362 -(((
363 -If payload = 0x04FF, it will reset the LSE01
364 -)))
365 365  
222 +**Use below commands:**
366 366  
367 -* **CFM**
224 +* (% style="color:blue" %)**AT+PRO=1**  (%%) ~/~/ Set to use CoAP protocol to uplink
225 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%)~/~/ to set CoAP server address and port
226 +* (% style="color:blue" %)**AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** (%%) ~/~/Set COAP resource path
368 368  
369 -Downlink Payload: 05000001, Set AT+CFM=1 or 05000000 , set AT+CFM=0
228 +For parameter description, please refer to AT command set
370 370  
230 +[[image:1657249793983-486.png]]
371 371  
372 372  
373 -== 2.6 ​Show Data in DataCake IoT Server ==
233 +After configure the server address and (% style="color:green" %)**reset the device**(%%) (via AT+ATZ ), NSE01 will start to uplink sensor values to CoAP server.
374 374  
375 -(((
376 -[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
377 -)))
235 +[[image:1657249831934-534.png]]
378 378  
379 -(((
380 -
381 -)))
382 382  
383 -(((
384 -(% style="color:blue" %)**Step 1**(%%):  Be sure that your device is programmed and properly connected to the network at this time.
385 -)))
386 386  
387 -(((
388 -(% style="color:blue" %)**Step 2**(%%):  To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
389 -)))
239 +=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
390 390  
241 +This feature is supported since firmware version v1.0.1
391 391  
392 -[[image:1654505857935-743.png]]
393 393  
244 +* (% style="color:blue" %)**AT+PRO=2   ** (%%) ~/~/ Set to use UDP protocol to uplink
245 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/ to set UDP server address and port
246 +* (% style="color:blue" %)**AT+CFM=1       ** (%%) ~/~/If the server does not respond, this command is unnecessary
394 394  
395 -[[image:1654505874829-548.png]]
248 +[[image:1657249864775-321.png]]
396 396  
397 397  
398 -(% style="color:blue" %)**Step 3**(%%)**:**  Create an account or log in Datacake.
251 +[[image:1657249930215-289.png]]
399 399  
400 -(% style="color:blue" %)**Step 4**(%%)**:**  Search the LSE01 and add DevEUI.
401 401  
402 402  
403 -[[image:1654505905236-553.png]]
255 +=== 2.2.6 Use MQTT protocol to uplink data ===
404 404  
257 +This feature is supported since firmware version v110
405 405  
406 -After added, the sensor data arrive TTN, it will also arrive and show in Mydevices.
407 407  
408 -[[image:1654505925508-181.png]]
260 +* (% style="color:blue" %)**AT+PRO=3   ** (%%) ~/~/Set to use MQTT protocol to uplink
261 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/Set MQTT server address and port
262 +* (% style="color:blue" %)**AT+CLIENT=CLIENT       ** (%%)~/~/Set up the CLIENT of MQTT
263 +* (% style="color:blue" %)**AT+UNAME=UNAME                               **(%%)~/~/Set the username of MQTT
264 +* (% style="color:blue" %)**AT+PWD=PWD                                        **(%%)~/~/Set the password of MQTT
265 +* (% style="color:blue" %)**AT+PUBTOPIC=NSE01_PUB                    **(%%)~/~/Set the sending topic of MQTT
266 +* (% style="color:blue" %)**AT+SUBTOPIC=NSE01_SUB          **(%%) ~/~/Set the subscription topic of MQTT
409 409  
268 +[[image:1657249978444-674.png]]
410 410  
411 411  
412 -== 2.7 Frequency Plans ==
271 +[[image:1657249990869-686.png]]
413 413  
414 -The LSE01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
415 415  
274 +(((
275 +MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
276 +)))
416 416  
417 -=== 2.7.1 EU863-870 (EU868) ===
418 418  
419 -(% style="color:#037691" %)** Uplink:**
420 420  
421 -868.1 - SF7BW125 to SF12BW125
280 +=== 2.2.7 Use TCP protocol to uplink data ===
422 422  
423 -868.3 - SF7BW125 to SF12BW125 and SF7BW250
282 +This feature is supported since firmware version v110
424 424  
425 -868.5 - SF7BW125 to SF12BW125
426 426  
427 -867.1 - SF7BW125 to SF12BW125
285 +* (% style="color:blue" %)**AT+PRO=4   ** (%%) ~/~/ Set to use TCP protocol to uplink
286 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5600   **(%%) ~/~/ to set TCP server address and port
428 428  
429 -867.3 - SF7BW125 to SF12BW125
288 +[[image:1657250217799-140.png]]
430 430  
431 -867.5 - SF7BW125 to SF12BW125
432 432  
433 -867.7 - SF7BW125 to SF12BW125
291 +[[image:1657250255956-604.png]]
434 434  
435 -867.9 - SF7BW125 to SF12BW125
436 436  
437 -868.8 - FSK
438 438  
295 +=== 2.2.8 Change Update Interval ===
439 439  
440 -(% style="color:#037691" %)** Downlink:**
297 +User can use below command to change the (% style="color:green" %)**uplink interval**.
441 441  
442 -Uplink channels 1-9 (RX1)
299 +* (% style="color:blue" %)**AT+TDC=600      ** (%%)~/~/ Set Update Interval to 600s
443 443  
444 -869.525 - SF9BW125 (RX2 downlink only)
301 +(((
302 +(% style="color:red" %)**NOTE:**
303 +)))
445 445  
305 +(((
306 +(% style="color:red" %)1. By default, the device will send an uplink message every 1 hour.
307 +)))
446 446  
447 447  
448 -=== 2.7.2 US902-928(US915) ===
449 449  
450 -Used in USA, Canada and South America. Default use CHE=2
311 +== 2.3  Uplink Payload ==
451 451  
452 -(% style="color:#037691" %)**Uplink:**
313 +In this mode, uplink payload includes in total 18 bytes
453 453  
454 -903.9 - SF7BW125 to SF10BW125
315 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
316 +|=(% style="width: 60px;" %)(((
317 +**Size(bytes)**
318 +)))|=(% style="width: 50px;" %)**6**|=(% style="width: 25px;" %)2|=(% style="width: 25px;" %)**2**|=(% style="width: 70px;" %)**1**|=(% style="width: 60px;" %)**2**|=(% style="width: 80px;" %)**2**|=(% style="width: 90px;" %)**2**|=(% style="width: 50px;" %)**1**
319 +|(% style="width:97px" %)**Value**|(% style="width:83px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:41px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:123px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:108px" %)[[Soil Moisture>>||anchor="H2.4.5A0SoilMoisture"]]|(% style="width:133px" %)[[Soil Temperature>>||anchor="H2.4.6A0SoilTemperature"]]|(% style="width:159px" %)[[Soil Conductivity(EC)>>||anchor="H2.4.7A0SoilConductivity28EC29"]]|(% style="width:80px" %)[[Interrupt>>||anchor="H2.4.8A0DigitalInterrupt"]]
455 455  
456 -904.1 - SF7BW125 to SF10BW125
321 +(((
322 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NSE01 uplink data.
323 +)))
457 457  
458 -904.3 - SF7BW125 to SF10BW125
459 459  
460 -904.5 - SF7BW125 to SF10BW125
326 +[[image:image-20220708111918-4.png]]
461 461  
462 -904.7 - SF7BW125 to SF10BW125
463 463  
464 -904.9 - SF7BW125 to SF10BW125
329 +The payload is ASCII string, representative same HEX:
465 465  
466 -905.1 - SF7BW125 to SF10BW125
331 +0x72403155615900640c7817075e0a8c02f900 where:
467 467  
468 -905.3 - SF7BW125 to SF10BW125
333 +* Device ID: 0x 724031556159 = 724031556159
334 +* Version: 0x0064=100=1.0.0
469 469  
336 +* BAT: 0x0c78 = 3192 mV = 3.192V
337 +* Singal: 0x17 = 23
338 +* Soil Moisture: 0x075e= 1886 = 18.86  %
339 +* Soil Temperature:0x0a8c =2700=27 °C
340 +* Soil Conductivity(EC) = 0x02f9 =761 uS /cm
341 +* Interrupt: 0x00 = 0
470 470  
471 -(% style="color:#037691" %)**Downlink:**
343 +== 2.4  Payload Explanation and Sensor Interface ==
472 472  
473 -923.3 - SF7BW500 to SF12BW500
474 474  
475 -923.9 - SF7BW500 to SF12BW500
346 +=== 2.4.1  Device ID ===
476 476  
477 -924.5 - SF7BW500 to SF12BW500
348 +(((
349 +By default, the Device ID equal to the last 6 bytes of IMEI.
350 +)))
478 478  
479 -925.1 - SF7BW500 to SF12BW500
352 +(((
353 +User can use (% style="color:blue" %)**AT+DEUI**(%%) to set Device ID
354 +)))
480 480  
481 -925.7 - SF7BW500 to SF12BW500
356 +(((
357 +**Example:**
358 +)))
482 482  
483 -926.3 - SF7BW500 to SF12BW500
360 +(((
361 +AT+DEUI=A84041F15612
362 +)))
484 484  
485 -926.9 - SF7BW500 to SF12BW500
364 +(((
365 +The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
366 +)))
486 486  
487 -927.5 - SF7BW500 to SF12BW500
488 488  
489 -923.3 - SF12BW500(RX2 downlink only)
490 490  
370 +=== 2.4.2  Version Info ===
491 491  
372 +(((
373 +Specify the software version: 0x64=100, means firmware version 1.00.
374 +)))
492 492  
493 -=== 2.7.3 CN470-510 (CN470) ===
376 +(((
377 +For example: 0x00 64 : this device is NSE01 with firmware version 1.0.0.
378 +)))
494 494  
495 -Used in China, Default use CHE=1
496 496  
497 -(% style="color:#037691" %)**Uplink:**
498 498  
499 -486.3 - SF7BW125 to SF12BW125
382 +=== 2.4.3  Battery Info ===
500 500  
501 -486.5 - SF7BW125 to SF12BW125
384 +(((
385 +Check the battery voltage for LSE01.
386 +)))
502 502  
503 -486.7 - SF7BW125 to SF12BW125
388 +(((
389 +Ex1: 0x0B45 = 2885mV
390 +)))
504 504  
505 -486.9 - SF7BW125 to SF12BW125
392 +(((
393 +Ex2: 0x0B49 = 2889mV
394 +)))
506 506  
507 -487.1 - SF7BW125 to SF12BW125
508 508  
509 -487.3 - SF7BW125 to SF12BW125
510 510  
511 -487.5 - SF7BW125 to SF12BW125
398 +=== 2.4.4  Signal Strength ===
512 512  
513 -487.7 - SF7BW125 to SF12BW125
400 +(((
401 +NB-IoT Network signal Strength.
402 +)))
514 514  
404 +(((
405 +**Ex1: 0x1d = 29**
406 +)))
515 515  
516 -(% style="color:#037691" %)**Downlink:**
408 +(((
409 +(% style="color:blue" %)**0**(%%)  -113dBm or less
410 +)))
517 517  
518 -506.7 - SF7BW125 to SF12BW125
412 +(((
413 +(% style="color:blue" %)**1**(%%)  -111dBm
414 +)))
519 519  
520 -506.9 - SF7BW125 to SF12BW125
416 +(((
417 +(% style="color:blue" %)**2...30**(%%) -109dBm... -53dBm
418 +)))
521 521  
522 -507.1 - SF7BW125 to SF12BW125
420 +(((
421 +(% style="color:blue" %)**31**  (%%) -51dBm or greater
422 +)))
523 523  
524 -507.3 - SF7BW125 to SF12BW125
424 +(((
425 +(% style="color:blue" %)**99**   (%%) Not known or not detectable
426 +)))
525 525  
526 -507.5 - SF7BW125 to SF12BW125
527 527  
528 -507.7 - SF7BW125 to SF12BW125
529 529  
530 -507.9 - SF7BW125 to SF12BW125
430 +=== 2.4.5  Soil Moisture ===
531 531  
532 -508.1 - SF7BW125 to SF12BW125
432 +(((
433 +(((
434 +Get the moisture content of the soil. The value range of the register is 0-10000(Decimal), divide this value by 100 to get the percentage of moisture in the soil.
435 +)))
436 +)))
533 533  
534 -505.3 - SF12BW125 (RX2 downlink only)
438 +(((
439 +(((
440 +For example, if the data you get from the register is **__0x05 0xDC__**, the moisture content in the soil is
441 +)))
442 +)))
535 535  
444 +(((
445 +
446 +)))
536 536  
448 +(((
449 +(% style="color:#4f81bd" %)**05DC(H) = 1500(D) /100 = 15%.**
450 +)))
537 537  
538 -=== 2.7.4 AU915-928(AU915) ===
539 539  
540 -Default use CHE=2
541 541  
542 -(% style="color:#037691" %)**Uplink:**
454 +=== 2.4.6  Soil Temperature ===
543 543  
544 -916.8 - SF7BW125 to SF12BW125
456 +(((
457 +Get the temperature in the soil. The value range of the register is -4000 - +800(Decimal), divide this value by 100 to get the temperature in the soil. For example, if the data you get from the register is __**0x09 0xEC**__, the temperature content in the soil is
458 +)))
545 545  
546 -917.0 - SF7BW125 to SF12BW125
460 +(((
461 +**Example**:
462 +)))
547 547  
548 -917.2 - SF7BW125 to SF12BW125
464 +(((
465 +If payload is 0105H: ((0x0105 & 0x8000)>>15 === 0),temp = 0105(H)/100 = 2.61 °C
466 +)))
549 549  
550 -917.4 - SF7BW125 to SF12BW125
468 +(((
469 +If payload is FF7EH: ((FF7E & 0x8000)>>15 ===1),temp = (FF7E(H)-FFFF(H))/100 = -1.29 °C
470 +)))
551 551  
552 -917.6 - SF7BW125 to SF12BW125
553 553  
554 -917.8 - SF7BW125 to SF12BW125
555 555  
556 -918.0 - SF7BW125 to SF12BW125
474 +=== 2.4.7  Soil Conductivity (EC) ===
557 557  
558 -918.2 - SF7BW125 to SF12BW125
476 +(((
477 +Obtain (% style="color:#4f81bd" %)**__soluble salt concentration__**(%%) in soil or (% style="color:#4f81bd" %)**__soluble ion concentration in liquid fertilizer__**(%%) or (% style="color:#4f81bd" %)**__planting medium__**(%%). The value range of the register is 0 - 20000(Decimal)( Can be greater than 20000).
478 +)))
559 559  
480 +(((
481 +For example, if the data you get from the register is __**0x00 0xC8**__, the soil conductivity is 00C8(H) = 200(D) = 200 uS/cm.
482 +)))
560 560  
561 -(% style="color:#037691" %)**Downlink:**
484 +(((
485 +Generally, the EC value of irrigation water is less than 800uS / cm.
486 +)))
562 562  
563 -923.3 - SF7BW500 to SF12BW500
488 +(((
489 +
490 +)))
564 564  
565 -923.9 - SF7BW500 to SF12BW500
492 +(((
493 +
494 +)))
566 566  
567 -924.5 - SF7BW500 to SF12BW500
496 +=== 2.4.8  Digital Interrupt ===
568 568  
569 -925.1 - SF7BW500 to SF12BW500
498 +(((
499 +Digital Interrupt refers to pin (% style="color:blue" %)**GPIO_EXTI**(%%), and there are different trigger methods. When there is a trigger, the NSE01 will send a packet to the server.
500 +)))
570 570  
571 -925.7 - SF7BW500 to SF12BW500
502 +(((
503 +The command is:
504 +)))
572 572  
573 -926.3 - SF7BW500 to SF12BW500
506 +(((
507 +(% style="color:blue" %)**AT+INTMOD=3 **(%%) ~/~/(more info about INMOD please refer [[**AT Command Manual**>>url:https://www.dragino.com/downloads/downloads/NB-IoT/NBSN95/DRAGINO_NBSN95-NB_AT%20Commands_v1.1.0.pdf]])**.**
508 +)))
574 574  
575 -926.9 - SF7BW500 to SF12BW500
576 576  
577 -927.5 - SF7BW500 to SF12BW500
511 +(((
512 +The lower four bits of this data field shows if this packet is generated by interrupt or not. Click here for the hardware and software set up.
513 +)))
578 578  
579 -923.3 - SF12BW500(RX2 downlink only)
580 580  
516 +(((
517 +Example:
518 +)))
581 581  
520 +(((
521 +0x(00): Normal uplink packet.
522 +)))
582 582  
583 -=== 2.7.5 AS920-923 & AS923-925 (AS923) ===
524 +(((
525 +0x(01): Interrupt Uplink Packet.
526 +)))
584 584  
585 -(% style="color:#037691" %)**Default Uplink channel:**
586 586  
587 -923.2 - SF7BW125 to SF10BW125
588 588  
589 -923.4 - SF7BW125 to SF10BW125
530 +=== 2.4.9  ​+5V Output ===
590 590  
532 +(((
533 +NSE01 will enable +5V output before all sampling and disable the +5v after all sampling. 
534 +)))
591 591  
592 -(% style="color:#037691" %)**Additional Uplink Channel**:
593 593  
594 -(OTAA mode, channel added by JoinAccept message)
537 +(((
538 +The 5V output time can be controlled by AT Command.
539 +)))
595 595  
596 -(% style="color:#037691" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
541 +(((
542 +(% style="color:blue" %)**AT+5VT=1000**
543 +)))
597 597  
598 -922.2 - SF7BW125 to SF10BW125
545 +(((
546 +Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
547 +)))
599 599  
600 -922.4 - SF7BW125 to SF10BW125
601 601  
602 -922.6 - SF7BW125 to SF10BW125
603 603  
604 -922.8 - SF7BW125 to SF10BW125
551 +== 2.5  Downlink Payload ==
605 605  
606 -923.0 - SF7BW125 to SF10BW125
553 +By default, NSE01 prints the downlink payload to console port.
607 607  
608 -922.0 - SF7BW125 to SF10BW125
555 +[[image:image-20220708133731-5.png]]
609 609  
610 610  
611 -(% style="color:#037691" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
558 +(((
559 +(% style="color:blue" %)**Examples:**
560 +)))
612 612  
613 -923.6 - SF7BW125 to SF10BW125
562 +(((
563 +
564 +)))
614 614  
615 -923.8 - SF7BW125 to SF10BW125
566 +* (((
567 +(% style="color:blue" %)**Set TDC**
568 +)))
616 616  
617 -924.0 - SF7BW125 to SF10BW125
570 +(((
571 +If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
572 +)))
618 618  
619 -924.2 - SF7BW125 to SF10BW125
574 +(((
575 +Payload:    01 00 00 1E    TDC=30S
576 +)))
620 620  
621 -924.4 - SF7BW125 to SF10BW125
578 +(((
579 +Payload:    01 00 00 3C    TDC=60S
580 +)))
622 622  
623 -924.6 - SF7BW125 to SF10BW125
582 +(((
583 +
584 +)))
624 624  
586 +* (((
587 +(% style="color:blue" %)**Reset**
588 +)))
625 625  
626 -(% style="color:#037691" %)** Downlink:**
590 +(((
591 +If payload = 0x04FF, it will reset the NSE01
592 +)))
627 627  
628 -Uplink channels 1-8 (RX1)
629 629  
630 -923.2 - SF10BW125 (RX2)
595 +* (% style="color:blue" %)**INTMOD**
631 631  
597 +(((
598 +Downlink Payload: 06000003, Set AT+INTMOD=3
599 +)))
632 632  
633 633  
634 -=== 2.7.6 KR920-923 (KR920) ===
635 635  
636 -Default channel:
603 +== 2.6  ​LED Indicator ==
637 637  
638 -922.1 - SF7BW125 to SF12BW125
605 +(((
606 +The NSE01 has an internal LED which is to show the status of different state.
639 639  
640 -922.3 - SF7BW125 to SF12BW125
641 641  
642 -922.5 - SF7BW125 to SF12BW125
609 +* When power on, NSE01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
610 +* Then the LED will be on for 1 second means device is boot normally.
611 +* After NSE01 join NB-IoT network. The LED will be ON for 3 seconds.
612 +* For each uplink probe, LED will be on for 500ms.
613 +)))
643 643  
644 644  
645 -(% style="color:#037691" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
646 646  
647 -922.1 - SF7BW125 to SF12BW125
648 648  
649 -922.3 - SF7BW125 to SF12BW125
618 +== 2.7  Installation in Soil ==
650 650  
651 -922.5 - SF7BW125 to SF12BW125
620 +__**Measurement the soil surface**__
652 652  
653 -922.7 - SF7BW125 to SF12BW125
622 +(((
623 +Choose the proper measuring position. Avoid the probe to touch rocks or hard things. Split the surface soil according to the measured deep. Keep the measured as original density. Vertical insert the probe into the soil to be measured. Make sure not shake when inserting. [[https:~~/~~/img.alicdn.com/imgextra/i3/2005165265/O1CN010rj9Oh1olPsQxrdUK_!!2005165265.jpg>>url:https://img.alicdn.com/imgextra/i3/2005165265/O1CN010rj9Oh1olPsQxrdUK_!!2005165265.jpg]]
624 +)))
654 654  
655 -922.9 - SF7BW125 to SF12BW125
626 +[[image:1657259653666-883.png]] ​
656 656  
657 -923.1 - SF7BW125 to SF12BW125
658 658  
659 -923.3 - SF7BW125 to SF12BW125
629 +(((
630 +
660 660  
632 +(((
633 +Dig a hole with diameter > 20CM.
634 +)))
661 661  
662 -(% style="color:#037691" %)**Downlink:**
636 +(((
637 +Horizontal insert the probe to the soil and fill the hole for long term measurement.
638 +)))
639 +)))
663 663  
664 -Uplink channels 1-7(RX1)
641 +[[image:1654506665940-119.png]]
665 665  
666 -921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
643 +(((
644 +
645 +)))
667 667  
668 668  
648 +== 2.8  ​Firmware Change Log ==
669 669  
670 -=== 2.7.7 IN865-867 (IN865) ===
671 671  
672 -(% style="color:#037691" %)** Uplink:**
651 +Download URL & Firmware Change log
673 673  
674 -865.0625 - SF7BW125 to SF12BW125
653 +[[www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/Firmware/]]
675 675  
676 -865.4025 - SF7BW125 to SF12BW125
677 677  
678 -865.9850 - SF7BW125 to SF12BW125
656 +Upgrade Instruction: [[Upgrade_Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
679 679  
680 680  
681 -(% style="color:#037691" %) **Downlink:**
682 682  
683 -Uplink channels 1-3 (RX1)
660 +== 2.9  ​Battery Analysis ==
684 684  
685 -866.550 - SF10BW125 (RX2)
662 +=== 2.9.1  ​Battery Type ===
686 686  
687 687  
688 -
689 -
690 -== 2.8 LED Indicator ==
691 -
692 -The LSE01 has an internal LED which is to show the status of different state.
693 -
694 -* Blink once when device power on.
695 -* Solid ON for 5 seconds once device successful Join the network.
696 -* Blink once when device transmit a packet.
697 -
698 -
699 -
700 -== 2.9 Installation in Soil ==
701 -
702 -**Measurement the soil surface**
703 -
704 -
705 -[[image:1654506634463-199.png]] ​
706 -
707 707  (((
708 -(((
709 -Choose the proper measuring position. Avoid the probe to touch rocks or hard things. Split the surface soil according to the measured deep. Keep the measured as original density. Vertical insert the probe into the soil to be measured. Make sure not shake when inserting.
666 +The NSE01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
710 710  )))
711 -)))
712 712  
713 713  
714 -
715 -[[image:1654506665940-119.png]]
716 -
717 717  (((
718 -Dig a hole with diameter > 20CM.
671 +The battery is designed to last for several years depends on the actually use environment and update interval. 
719 719  )))
720 720  
721 -(((
722 -Horizontal insert the probe to the soil and fill the hole for long term measurement.
723 -)))
724 724  
725 -
726 -== 2.10 ​Firmware Change Log ==
727 -
728 728  (((
729 -**Firmware download link:**
676 +The battery related documents as below:
730 730  )))
731 731  
732 -(((
733 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
734 -)))
679 +* [[Battery Dimension>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
680 +* [[Lithium-Thionyl Chloride Battery datasheet>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
681 +* [[Lithium-ion Battery-Capacitor datasheet>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
735 735  
736 736  (((
737 -
684 +[[image:image-20220708140453-6.png]]
738 738  )))
739 739  
740 -(((
741 -**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]
742 -)))
743 743  
744 -(((
745 -
746 -)))
747 747  
748 -(((
749 -**V1.0.**
750 -)))
689 +=== 2.9.2  Power consumption Analyze ===
751 751  
752 752  (((
753 -Release
692 +Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
754 754  )))
755 755  
756 756  
757 -== 2.11 ​Battery Analysis ==
758 -
759 -=== 2.11.1 ​Battery Type ===
760 -
761 761  (((
762 -The LSE01 battery is a combination of a 4000mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
697 +Instruction to use as below:
763 763  )))
764 764  
765 765  (((
766 -The battery is designed to last for more than 5 years for the LSN50.
701 +(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
767 767  )))
768 768  
704 +
769 769  (((
770 -(((
771 -The battery-related documents are as below:
706 +(% style="color:blue" %)**Step 2: **(%%) Open it and choose
772 772  )))
773 -)))
774 774  
775 775  * (((
776 -[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
710 +Product Model
777 777  )))
778 778  * (((
779 -[[Lithium-Thionyl Chloride Battery  datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
713 +Uplink Interval
780 780  )))
781 781  * (((
782 -[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
716 +Working Mode
783 783  )))
784 784  
785 - [[image:image-20220610172436-1.png]]
719 +(((
720 +And the Life expectation in difference case will be shown on the right.
721 +)))
786 786  
723 +[[image:image-20220708141352-7.jpeg]]
787 787  
788 788  
789 -=== 2.11.2 ​Battery Note ===
790 790  
727 +=== 2.9.3  ​Battery Note ===
728 +
791 791  (((
792 792  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
793 793  )))
... ... @@ -794,302 +794,176 @@
794 794  
795 795  
796 796  
797 -=== 2.11.3 Replace the battery ===
735 +=== 2.9.4  Replace the battery ===
798 798  
799 799  (((
800 -If Battery is lower than 2.7v, user should replace the battery of LSE01.
738 +The default battery pack of NSE01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
801 801  )))
802 802  
741 +
742 +
743 += 3. ​ Access NB-IoT Module =
744 +
803 803  (((
804 -You can change the battery in the LSE01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
746 +Users can directly access the AT command set of the NB-IoT module.
805 805  )))
806 806  
807 807  (((
808 -The default battery pack of LSE01 includes a ER18505 plus super capacitor. If user can’t find this pack locally, they can find ER18505 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
750 +The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
809 809  )))
810 810  
753 +[[image:1657261278785-153.png]]
811 811  
812 812  
813 -= 3. ​Using the AT Commands =
814 814  
815 -== 3.1 Access AT Commands ==
757 += 4.  Using the AT Commands =
816 816  
759 +== 4.1  Access AT Commands ==
817 817  
818 -LSE01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSE01 for using AT command, as below.
761 +See this link for detail: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/]]
819 819  
820 -[[image:1654501986557-872.png||height="391" width="800"]]
821 821  
764 +AT+<CMD>?  : Help on <CMD>
822 822  
823 -Or if you have below board, use below connection:
766 +AT+<CMD>         : Run <CMD>
824 824  
768 +AT+<CMD>=<value> : Set the value
825 825  
826 -[[image:1654502005655-729.png||height="503" width="801"]]
770 +AT+<CMD>=?  : Get the value
827 827  
828 828  
829 -
830 -In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSE01. LSE01 will output system info once power on as below:
831 -
832 -
833 - [[image:1654502050864-459.png||height="564" width="806"]]
834 -
835 -
836 -Below are the available commands, a more detailed AT Command manual can be found at [[AT Command Manual>>https://www.dropbox.com/sh/qr6vproz4z4kzjz/AAAD48h3OyWrU1hq_Cqm8jIwa?dl=0]]: [[https:~~/~~/www.dropbox.com/sh/qr6vproz4z4kzjz/AAAD48h3OyWrU1hq_Cqm8jIwa?dl=0>>https://www.dropbox.com/sh/qr6vproz4z4kzjz/AAAD48h3OyWrU1hq_Cqm8jIwa?dl=0]]
837 -
838 -
839 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>? **(%%) : Help on <CMD>
840 -
841 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD> **(%%) : Run <CMD>
842 -
843 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>=<value>**(%%) : Set the value
844 -
845 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>=?**(%%)  : Get the value
846 -
847 -
848 848  (% style="color:#037691" %)**General Commands**(%%)      
849 849  
850 -(% style="background-color:#dcdcdc" %)**AT**(%%)  : Attention       
775 +AT  : Attention       
851 851  
852 -(% style="background-color:#dcdcdc" %)**AT?**(%%)  : Short Help     
777 +AT?  : Short Help     
853 853  
854 -(% style="background-color:#dcdcdc" %)**ATZ**(%%)  : MCU Reset    
779 +ATZ  : MCU Reset    
855 855  
856 -(% style="background-color:#dcdcdc" %)**AT+TDC**(%%)  : Application Data Transmission Interval 
781 +AT+TDC  : Application Data Transmission Interval
857 857  
783 +AT+CFG  : Print all configurations
858 858  
859 -(% style="color:#037691" %)**Keys, IDs and EUIs management**
785 +AT+CFGMOD           : Working mode selection
860 860  
861 -(% style="background-color:#dcdcdc" %)**AT+APPEUI**(%%)              : Application EUI      
787 +AT+INTMOD            : Set the trigger interrupt mode
862 862  
863 -(% style="background-color:#dcdcdc" %)**AT+APPKEY**(%%)              : Application Key     
789 +AT+5VT  : Set extend the time of 5V power  
864 864  
865 -(% style="background-color:#dcdcdc" %)**AT+APPSKEY**(%%)            : Application Session Key
791 +AT+PRO  : Choose agreement
866 866  
867 -(% style="background-color:#dcdcdc" %)**AT+DADDR**(%%)              : Device Address     
793 +AT+WEIGRE  : Get weight or set weight to 0
868 868  
869 -(% style="background-color:#dcdcdc" %)**AT+DEUI**(%%)                   : Device EUI     
795 +AT+WEIGAP  : Get or Set the GapValue of weight
870 870  
871 -(% style="background-color:#dcdcdc" %)**AT+NWKID**(%%)               : Network ID (You can enter this command change only after successful network connection) 
797 +AT+RXDL  : Extend the sending and receiving time
872 872  
873 -(% style="background-color:#dcdcdc" %)**AT+NWKSKEY**(%%)          : Network Session Key Joining and sending date on LoRa network  
799 +AT+CNTFAC  : Get or set counting parameters
874 874  
875 -(% style="background-color:#dcdcdc" %)**AT+CFM**(%%)  : Confirm Mode       
801 +AT+SERVADDR  : Server Address
876 876  
877 -(% style="background-color:#dcdcdc" %)**AT+CFS**(%%)                     : Confirm Status       
878 878  
879 -(% style="background-color:#dcdcdc" %)**AT+JOIN**(%%)  : Join LoRa? Network       
804 +(% style="color:#037691" %)**COAP Management**      
880 880  
881 -(% style="background-color:#dcdcdc" %)**AT+NJM**(%%)  : LoRa? Network Join Mode    
806 +AT+URI            : Resource parameters
882 882  
883 -(% style="background-color:#dcdcdc" %)**AT+NJS**(%%)                     : LoRa? Network Join Status    
884 884  
885 -(% style="background-color:#dcdcdc" %)**AT+RECV**(%%)                  : Print Last Received Data in Raw Format
809 +(% style="color:#037691" %)**UDP Management**
886 886  
887 -(% style="background-color:#dcdcdc" %)**AT+RECVB**(%%)                : Print Last Received Data in Binary Format      
811 +AT+CFM          : Upload confirmation mode (only valid for UDP)
888 888  
889 -(% style="background-color:#dcdcdc" %)**AT+SEND**(%%)                  : Send Text Data      
890 890  
891 -(% style="background-color:#dcdcdc" %)**AT+SENB**(%%)                  : Send Hexadecimal Data
814 +(% style="color:#037691" %)**MQTT Management**
892 892  
816 +AT+CLIENT               : Get or Set MQTT client
893 893  
894 -(% style="color:#037691" %)**LoRa Network Management**
818 +AT+UNAME  : Get or Set MQTT Username
895 895  
896 -(% style="background-color:#dcdcdc" %)**AT+ADR**(%%)          : Adaptive Rate
820 +AT+PWD                  : Get or Set MQTT password
897 897  
898 -(% style="background-color:#dcdcdc" %)**AT+CLASS**(%%)  : LoRa Class(Currently only support class A
822 +AT+PUBTOPIC  : Get or Set MQTT publish topic
899 899  
900 -(% style="background-color:#dcdcdc" %)**AT+DCS**(%%)  : Duty Cycle Setting 
824 +AT+SUBTOPIC  : Get or Set MQTT subscription topic
901 901  
902 -(% style="background-color:#dcdcdc" %)**AT+DR**(%%)  : Data Rate (Can Only be Modified after ADR=0)     
903 903  
904 -(% style="background-color:#dcdcdc" %)**AT+FCD**(%%)  : Frame Counter Downlink       
827 +(% style="color:#037691" %)**Information**          
905 905  
906 -(% style="background-color:#dcdcdc" %)**AT+FCU**(%%)  : Frame Counter Uplink   
829 +AT+FDR  : Factory Data Reset
907 907  
908 -(% style="background-color:#dcdcdc" %)**AT+JN1DL**(%%)  : Join Accept Delay1
831 +AT+PWORD  : Serial Access Password
909 909  
910 -(% style="background-color:#dcdcdc" %)**AT+JN2DL**(%%)  : Join Accept Delay2
911 911  
912 -(% style="background-color:#dcdcdc" %)**AT+PNM**(%%)  : Public Network Mode   
913 913  
914 -(% style="background-color:#dcdcdc" %)**AT+RX1DL**(%%)  : Receive Delay1      
835 += ​5.  FAQ =
915 915  
916 -(% style="background-color:#dcdcdc" %)**AT+RX2DL**(%%)  : Receive Delay2      
837 +== 5.1 ​ How to Upgrade Firmware ==
917 917  
918 -(% style="background-color:#dcdcdc" %)**AT+RX2DR**(%%)  : Rx2 Window Data Rate 
919 919  
920 -(% style="background-color:#dcdcdc" %)**AT+RX2FQ**(%%)  : Rx2 Window Frequency
921 -
922 -(% style="background-color:#dcdcdc" %)**AT+TXP**(%%)  : Transmit Power
923 -
924 -(% style="background-color:#dcdcdc" %)**AT+ MOD**(%%)  : Set work mode
925 -
926 -
927 -(% style="color:#037691" %)**Information** 
928 -
929 -(% style="background-color:#dcdcdc" %)**AT+RSSI**(%%)           : RSSI of the Last Received Packet   
930 -
931 -(% style="background-color:#dcdcdc" %)**AT+SNR**(%%)           : SNR of the Last Received Packet   
932 -
933 -(% style="background-color:#dcdcdc" %)**AT+VER**(%%)           : Image Version and Frequency Band       
934 -
935 -(% style="background-color:#dcdcdc" %)**AT+FDR**(%%)           : Factory Data Reset
936 -
937 -(% style="background-color:#dcdcdc" %)**AT+PORT**(%%)  : Application Port    
938 -
939 -(% style="background-color:#dcdcdc" %)**AT+CHS**(%%)  : Get or Set Frequency (Unit: Hz) for Single Channel Mode
940 -
941 - (% style="background-color:#dcdcdc" %)**AT+CHE**(%%)  : Get or Set eight channels mode, Only for US915, AU915, CN470
942 -
943 -
944 -= ​4. FAQ =
945 -
946 -== 4.1 ​How to change the LoRa Frequency Bands/Region? ==
947 -
948 948  (((
949 -You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
950 -When downloading the images, choose the required image file for download. ​
841 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
951 951  )))
952 952  
953 953  (((
954 -
845 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
955 955  )))
956 956  
957 957  (((
958 -How to set up LSE01 to work in 8 channel mode By default, the frequency bands US915, AU915, CN470 work in 72 frequencies. Many gateways are 8 channel gateways, and in this case, the OTAA join time and uplink schedule is long and unpredictable while the end node is hopping in 72 frequencies.
849 +(% style="color:red" %)Notice, NSE01 and LSE01 share the same mother board. They use the same connection and method to update.
959 959  )))
960 960  
961 -(((
962 -
963 -)))
964 964  
965 -(((
966 -You can configure the end node to work in 8 channel mode by using the AT+CHE command. The 500kHz channels are always included for OTAA.
967 -)))
968 968  
969 -(((
970 -
971 -)))
854 +== 5.2  Can I calibrate NSE01 to different soil types? ==
972 972  
973 973  (((
974 -For example, in **US915** band, the frequency table is as below. By default, the end node will use all channels (0~~71) for OTAA Join process. After the OTAA Join, the end node will use these all channels (0~~71) to send uplink packets.
857 +NSE01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
975 975  )))
976 976  
977 -[[image:image-20220606154726-3.png]]
978 978  
861 += 6.  Trouble Shooting =
979 979  
980 -When you use the TTN network, the US915 frequency bands use are:
863 +== 6.1  ​Connection problem when uploading firmware ==
981 981  
982 -* 903.9 - SF7BW125 to SF10BW125
983 -* 904.1 - SF7BW125 to SF10BW125
984 -* 904.3 - SF7BW125 to SF10BW125
985 -* 904.5 - SF7BW125 to SF10BW125
986 -* 904.7 - SF7BW125 to SF10BW125
987 -* 904.9 - SF7BW125 to SF10BW125
988 -* 905.1 - SF7BW125 to SF10BW125
989 -* 905.3 - SF7BW125 to SF10BW125
990 -* 904.6 - SF8BW500
991 991  
992 992  (((
993 -Because the end node is now hopping in 72 frequency, it makes it difficult for the devices to Join the TTN network and uplink data. To solve this issue, you can access the device via the AT commands and run:
994 -
995 -* (% style="color:#037691" %)**AT+CHE=2**
996 -* (% style="color:#037691" %)**ATZ**
867 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
997 997  )))
998 998  
870 +(% class="wikigeneratedid" %)
999 999  (((
1000 1000  
1001 -
1002 -to set the end node to work in 8 channel mode. The device will work in Channel 8-15 & 64-71 for OTAA, and channel 8-15 for Uplink.
1003 1003  )))
1004 1004  
1005 -(((
1006 -
1007 -)))
1008 1008  
1009 -(((
1010 -The **AU915** band is similar. Below are the AU915 Uplink Channels.
1011 -)))
876 +== 6.2  AT Command input doesn't work ==
1012 1012  
1013 -[[image:image-20220606154825-4.png]]
1014 -
1015 -
1016 -== 4.2 ​Can I calibrate LSE01 to different soil types? ==
1017 -
1018 -LSE01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/&file=Calibrate_to_other_Soil_20220605.pdf]].
1019 -
1020 -
1021 -= 5. Trouble Shooting =
1022 -
1023 -== 5.1 ​Why I can’t join TTN in US915 / AU915 bands? ==
1024 -
1025 -It is due to channel mapping. Please see the [[Eight Channel Mode>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]] section above for details.
1026 -
1027 -
1028 -== 5.2 AT Command input doesn’t work ==
1029 -
1030 1030  (((
1031 -In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1032 -)))
879 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1033 1033  
1034 -
1035 -== 5.3 Device rejoin in at the second uplink packet ==
1036 -
1037 -(% style="color:#4f81bd" %)**Issue describe as below:**
1038 -
1039 -[[image:1654500909990-784.png]]
1040 -
1041 -
1042 -(% style="color:#4f81bd" %)**Cause for this issue:**
1043 -
1044 -(((
1045 -The fuse on LSE01 is not large enough, some of the soil probe require large current up to 5v 800mA, in a short pulse. When this happen, it cause the device reboot so user see rejoin.
881 +
1046 1046  )))
1047 1047  
1048 1048  
1049 -(% style="color:#4f81bd" %)**Solution: **
885 += 7. ​ Order Info =
1050 1050  
1051 -All new shipped LSE01 after 2020-May-30 will have this to fix. For the customer who see this issue, please bypass the fuse as below:
1052 1052  
1053 -[[image:1654500929571-736.png||height="458" width="832"]]
888 +Part Number**:** (% style="color:#4f81bd" %)**NSE01**
1054 1054  
1055 1055  
1056 -= 6. ​Order Info =
1057 -
1058 -
1059 -Part Number**:** (% style="color:#4f81bd" %)**LSE01-XX-YY**
1060 -
1061 -
1062 -(% style="color:#4f81bd" %)**XX**(%%)**:** The default frequency band
1063 -
1064 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1065 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1066 -* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
1067 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1068 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1069 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1070 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1071 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1072 -
1073 -(% style="color:#4f81bd" %)**YY**(%%)**: **Battery Option
1074 -
1075 -* (% style="color:red" %)**4**(%%): 4000mAh battery
1076 -* (% style="color:red" %)**8**(%%): 8500mAh battery
1077 -
1078 1078  (% class="wikigeneratedid" %)
1079 1079  (((
1080 1080  
1081 1081  )))
1082 1082  
1083 -= 7. Packing Info =
896 += 8.  Packing Info =
1084 1084  
1085 1085  (((
1086 1086  
1087 1087  
1088 1088  (% style="color:#037691" %)**Package Includes**:
1089 -)))
1090 1090  
1091 -* (((
1092 -LSE01 LoRaWAN Soil Moisture & EC Sensor x 1
903 +* NSE01 NB-IoT Soil Moisture & EC Sensor x 1
904 +* External antenna x 1
1093 1093  )))
1094 1094  
1095 1095  (((
... ... @@ -1096,24 +1096,19 @@
1096 1096  
1097 1097  
1098 1098  (% style="color:#037691" %)**Dimension and weight**:
1099 -)))
1100 1100  
1101 -* (((
1102 -Device Size: cm
912 +* Size: 195 x 125 x 55 mm
913 +* Weight:   420g
1103 1103  )))
1104 -* (((
1105 -Device Weight: g
1106 -)))
1107 -* (((
1108 -Package Size / pcs : cm
1109 -)))
1110 -* (((
1111 -Weight / pcs : g
1112 1112  
916 +(((
1113 1113  
918 +
919 +
920 +
1114 1114  )))
1115 1115  
1116 -= 8. Support =
923 += 9.  Support =
1117 1117  
1118 1118  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1119 1119  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1657245163077-232.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +81.0 KB
Content
1657246476176-652.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +492.6 KB
Content
1657249419225-449.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +81.0 KB
Content
1657249468462-536.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +483.6 KB
Content
1657249793983-486.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.8 KB
Content
1657249831934-534.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +72.5 KB
Content
1657249864775-321.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.0 KB
Content
1657249930215-289.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +77.3 KB
Content
1657249978444-674.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +139.5 KB
Content
1657249990869-686.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.9 KB
Content
1657250217799-140.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.7 KB
Content
1657250255956-604.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +99.0 KB
Content
1657259653666-883.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +344.4 KB
Content
1657260785982-288.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +138.2 KB
Content
1657261119050-993.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +126.1 KB
Content
1657261278785-153.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +126.1 KB
Content
1657271519014-786.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +71.5 KB
Content
1657327959271-447.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +78.3 KB
Content
1657328609906-564.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +492.6 KB
Content
1657328659945-416.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +78.8 KB
Content
1657328756309-230.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +78.5 KB
Content
1657328884227-504.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +483.6 KB
Content
image-20220708101224-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +22.2 KB
Content
image-20220708101605-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.5 KB
Content
image-20220708110657-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +251.7 KB
Content
image-20220708111918-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +38.8 KB
Content
image-20220708133731-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +8.7 KB
Content
image-20220708140453-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +132.7 KB
Content
image-20220708141352-7.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +102.7 KB
Content
image-20220709084038-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +72.0 KB
Content
image-20220709084137-2.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +72.0 KB
Content
image-20220709084207-3.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +72.0 KB
Content
image-20220709084458-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +199.5 KB
Content
image-20220709085040-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +200.4 KB
Content
image-20220709092052-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +247.3 KB
Content