Skip to Content
Last modified by Mengting Qiu on 2024/04/02 16:44
From version 38.1
edited by Xiaoling
on 2022/06/25 16:31
Change comment: There is no comment for this version
To version 90.2
edited by Xiaoling
on 2022/07/09 09:45
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LSE01-LoRaWAN Soil Moisture & EC Sensor User Manual
1 +NDDS75 NB-IoT Distance Detect Sensor User Manual
Content
... ... @@ -1,19 +1,12 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20220606151504-2.jpeg||height="554" width="554"]]
2 +[[image:image-20220709085040-1.png||height="542" width="524"]]
3 3  
4 4  
5 5  
6 6  
7 7  
8 -
9 -
10 -
11 -
12 -
13 -
14 14  **Table of Contents:**
15 15  
16 -{{toc/}}
17 17  
18 18  
19 19  
... ... @@ -20,777 +20,723 @@
20 20  
21 21  
22 22  
23 -= 1. Introduction =
16 += 1.  Introduction =
24 24  
25 -== 1.1 ​What is LoRaWAN Soil Moisture & EC Sensor ==
18 +== 1.1 ​ What is NDDS75 Distance Detection Sensor ==
26 26  
27 27  (((
28 28  
29 29  
30 -The Dragino LSE01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil Moisture & EC Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity. It also has been calibrated in factory for Mineral soil type.
31 -)))
32 -
33 33  (((
34 -It detects (% style="color:#4f81bd" %)**Soil Moisture**(%%), (% style="color:#4f81bd" %)**Soil Temperature**(%%) and (% style="color:#4f81bd" %)**Soil Conductivity**(%%), and uploads the value via wireless to LoRaWAN IoT Server.
24 +The Dragino NDDS75 is a (% style="color:blue" %)**NB-IoT Distance Detection Sensor**(%%) for Internet of Things solution. It is designed to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.
25 +\\The NDDS75 can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc. It detects the distance between the measured object and the sensor, and uploads the value via wireless to IoT Server via NB-IoT Network.
26 +\\NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
27 +\\NDDS75 supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP and CoAP** (%%)for different application requirement.
28 +\\NDDS75 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
29 +\\To use NDDS75, user needs to check if there is NB-IoT coverage in local area and with the bands NDDS75 supports. If the local operate support it, user needs to get a NB-IoT SIM card from local operator and install NDDS75 to get NB-IoT network connection.
35 35  )))
36 36  
37 -(((
38 -The LoRa wireless technology used in LES01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
32 +
39 39  )))
40 40  
41 -(((
42 -LES01 is powered by (% style="color:#4f81bd" %)**4000mA or 8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 10 years.
43 -)))
44 -
45 -(((
46 -Each LES01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
47 -)))
48 -
49 -
50 50  [[image:1654503236291-817.png]]
51 51  
52 52  
53 -[[image:1654503265560-120.png]]
38 +[[image:1657327959271-447.png]]
54 54  
55 55  
56 56  
57 -== 1.2 ​Features ==
42 +== 1.2 ​ Features ==
58 58  
59 -* LoRaWAN 1.0.3 Class A
44 +
45 +* NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
60 60  * Ultra low power consumption
61 -* Monitor Soil Moisture
62 -* Monitor Soil Temperature
63 -* Monitor Soil Conductivity
64 -* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
47 +* Distance Detection by Ultrasonic technology
48 +* Flat object range 280mm - 7500mm
49 +* Accuracy: ±(1cm+S*0.3%) (S: Distance)
50 +* Cable Length: 25cm
65 65  * AT Commands to change parameters
66 66  * Uplink on periodically
67 67  * Downlink to change configure
68 68  * IP66 Waterproof Enclosure
69 -* 4000mAh or 8500mAh Battery for long term use
55 +* Micro SIM card slot for NB-IoT SIM
56 +* 8500mAh Battery for long term use
70 70  
58 +== 1.3  Specification ==
71 71  
72 72  
73 -== 1.3 Specification ==
61 +(% style="color:#037691" %)**Common DC Characteristics:**
74 74  
75 -Measure Volume: Base on the centra pin of the probe, a cylinder with 7cm diameter and 10cm height.
63 +* Supply Voltage: 2.1v ~~ 3.6v
64 +* Operating Temperature: -40 ~~ 85°C
76 76  
77 -[[image:image-20220606162220-5.png]]
66 +(% style="color:#037691" %)**NB-IoT Spec:**
78 78  
68 +* - B1 @H-FDD: 2100MHz
69 +* - B3 @H-FDD: 1800MHz
70 +* - B8 @H-FDD: 900MHz
71 +* - B5 @H-FDD: 850MHz
72 +* - B20 @H-FDD: 800MHz
73 +* - B28 @H-FDD: 700MHz
79 79  
75 +(% style="color:#037691" %)**Battery:**
80 80  
81 -== ​1.4 Applications ==
77 +* Li/SOCI2 un-chargeable battery
78 +* Capacity: 8500mAh
79 +* Self Discharge: <1% / Year @ 25°C
80 +* Max continuously current: 130mA
81 +* Max boost current: 2A, 1 second
82 82  
83 +(% style="color:#037691" %)**Power Consumption**
84 +
85 +* STOP Mode: 10uA @ 3.3v
86 +* Max transmit power: 350mA@3.3v
87 +
88 +
89 +== ​1.4  Applications ==
90 +
91 +* Smart Buildings & Home Automation
92 +* Logistics and Supply Chain Management
93 +* Smart Metering
83 83  * Smart Agriculture
95 +* Smart Cities
96 +* Smart Factory
84 84  
85 85  (% class="wikigeneratedid" id="H200B1.5FirmwareChangelog" %)
86 86  ​
87 87  
88 -== 1.5 Firmware Change log ==
89 89  
90 90  
91 -**LSE01 v1.0 :**  Release
103 +== 1.5  Pin Definitions ==
92 92  
93 93  
106 +[[image:1657328609906-564.png]]
94 94  
95 -= 2. Configure LSE01 to connect to LoRaWAN network =
96 96  
97 -== 2.1 How it works ==
98 98  
110 += 2.  Use NDDS75 to communicate with IoT Server =
111 +
112 +== 2.1  How it works ==
113 +
99 99  (((
100 -The LSE01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSE0150. It will automatically join the network via OTAA and start to send the sensor value
115 +The NDDS75 is equipped with a NB-IoT module, the pre-loaded firmware in NDDS75 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by NDDS75.
101 101  )))
102 102  
118 +
103 103  (((
104 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H3.200BUsingtheATCommands"]].
120 +The diagram below shows the working flow in default firmware of NDDS75:
105 105  )))
106 106  
123 +(((
124 +
125 +)))
107 107  
127 +[[image:1657328659945-416.png]]
108 108  
109 -== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
129 +(((
130 +
131 +)))
110 110  
111 -Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.
112 112  
134 +== 2.2 ​ Configure the NDDS75 ==
113 113  
114 -[[image:1654503992078-669.png]]
115 115  
137 +=== 2.2.1 Test Requirement ===
116 116  
117 -The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
139 +(((
140 +To use NDDS75 in your city, make sure meet below requirements:
141 +)))
118 118  
143 +* Your local operator has already distributed a NB-IoT Network there.
144 +* The local NB-IoT network used the band that NSE01 supports.
145 +* Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
119 119  
120 -(% style="color:blue" %)**Step 1**(%%):  Create a device in TTN with the OTAA keys from LSE01.
147 +(((
148 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDDS75 will use CoAP((% style="color:red" %)120.24.4.116:5683)(%%) or raw UDP((% style="color:red" %)120.24.4.116:5601)(%%) or MQTT((% style="color:red" %)120.24.4.116:1883)(%%)or TCP((% style="color:red" %)120.24.4.116:5600)(%%)protocol to send data to the test server
149 +)))
121 121  
122 -Each LSE01 is shipped with a sticker with the default device EUI as below:
123 123  
124 -[[image:image-20220606163732-6.jpeg]]
152 +[[image:1657328756309-230.png]]
125 125  
126 -You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
127 127  
128 -**Add APP EUI in the application**
129 129  
156 +=== 2.2.2 Insert SIM card ===
130 130  
131 -[[image:1654504596150-405.png]]
158 +(((
159 +Insert the NB-IoT Card get from your provider.
160 +)))
132 132  
162 +(((
163 +User need to take out the NB-IoT module and insert the SIM card like below:
164 +)))
133 133  
134 134  
135 -**Add APP KEY and DEV EUI**
167 +[[image:1657328884227-504.png]]
136 136  
137 -[[image:1654504683289-357.png]]
138 138  
139 139  
171 +=== 2.2.3 Connect USB – TTL to NDDS75 to configure it ===
140 140  
141 -(% style="color:blue" %)**Step 2**(%%): Power on LSE01
173 +(((
174 +(((
175 +User need to configure NDDS75 via serial port to set the (% style="color:blue" %)**Server Address** / **Uplink Topic** (%%)to define where and how-to uplink packets. NDDS75 support AT Commands, user can use a USB to TTL adapter to connect to NDDS75 and use AT Commands to configure it, as below.
176 +)))
177 +)))
142 142  
179 +[[image:image-20220709092052-2.png]]
143 143  
144 -Put a Jumper on JP2 to power on the device. ( The Jumper must be in FLASH position).
181 +**Connection:**
145 145  
146 -[[image:image-20220606163915-7.png]]
183 + (% style="background-color:yellow" %)USB TTL GND <~-~-~-~-> GND
147 147  
185 + (% style="background-color:yellow" %)USB TTL TXD <~-~-~-~-> UART_RXD
148 148  
149 -(% style="color:blue" %)**Step 3**(%%)**:** The LSE01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
187 + (% style="background-color:yellow" %)USB TTL RXD <~-~-~-~-> UART_TXD
150 150  
151 -[[image:1654504778294-788.png]]
152 152  
190 +In the PC, use below serial tool settings:
153 153  
192 +* Baud:  (% style="color:green" %)**9600**
193 +* Data bits:** (% style="color:green" %)8(%%)**
194 +* Stop bits: (% style="color:green" %)**1**
195 +* Parity:  (% style="color:green" %)**None**
196 +* Flow Control: (% style="color:green" %)**None**
154 154  
155 -== 2.3 Uplink Payload ==
156 -
157 -
158 -=== 2.3.1 MOD~=0(Default Mode) ===
159 -
160 -LSE01 will uplink payload via LoRaWAN with below payload format: 
161 -
162 162  (((
163 -Uplink payload includes in total 11 bytes.
199 +Make sure the switch is in FLASH position, then power on device by connecting the jumper on NDDS75. NDDS75 will output system info once power on as below, we can enter the (% style="color:green" %)**password: 12345678**(%%) to access AT Command input.
164 164  )))
165 165  
166 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:500px" %)
167 -|(((
168 -**Size**
202 +[[image:1657329814315-101.png]]
169 169  
170 -**(bytes)**
171 -)))|**2**|**2**|**2**|**2**|**2**|**1**
172 -|**Value**|[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(((
173 -Temperature
174 -
175 -(Reserve, Ignore now)
176 -)))|[[Soil Moisture>>||anchor="H2.3.4SoilMoisture"]]|[[Soil Temperature>>||anchor="H2.3.5SoilTemperature"]]|[[Soil Conductivity (EC)>>||anchor="H2.3.6SoilConductivity28EC29"]]|(((
177 -MOD & Digital Interrupt
178 -
179 -(Optional)
204 +(((
205 +(% style="color:red" %)Note: the valid AT Commands can be found at: (%%)[[https:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NDDS75/>>url:https://www.dragino.com/downloads/index.php?dir=NB-IoT/NDDS75/]]
180 180  )))
181 181  
182 182  
183 183  
184 -=== 2.3.2 MOD~=1(Original value) ===
210 +=== 2.2.4 Use CoAP protocol to uplink data ===
185 185  
186 -This mode can get the original AD value of moisture and original conductivity (with temperature drift compensation).
212 +(% style="color:red" %)Note: if you don't have CoAP server, you can refer this link to set up one: (%%)[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/>>http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
187 187  
188 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:500px" %)
189 -|(((
190 -**Size**
191 191  
192 -**(bytes)**
193 -)))|**2**|**2**|**2**|**2**|**2**|**1**
194 -|**Value**|[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(((
195 -Temperature
215 +**Use below commands:**
196 196  
197 -(Reserve, Ignore now)
198 -)))|[[Soil Moisture>>||anchor="H2.3.4SoilMoisture"]](raw)|[[Soil Temperature>>||anchor="H2.3.5SoilTemperature"]]|[[Soil Conductivity (EC)>>||anchor="H2.3.6SoilConductivity28EC29"]](raw)|(((
199 -MOD & Digital Interrupt
217 +* (% style="color:blue" %)**AT+PRO=1**  (%%) ~/~/ Set to use CoAP protocol to uplink
218 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%)~/~/ to set CoAP server address and port
219 +* (% style="color:blue" %)**AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** (%%) ~/~/Set COAP resource path
200 200  
201 -(Optional)
202 -)))
221 +For parameter description, please refer to AT command set
203 203  
223 +[[image:1657330452568-615.png]]
204 204  
205 205  
206 -=== 2.3.3 Battery Info ===
226 +After configure the server address and (% style="color:green" %)**reset the device**(%%) (via AT+ATZ ), NDDS75 will start to uplink sensor values to CoAP server.
207 207  
208 -(((
209 -Check the battery voltage for LSE01.
210 -)))
228 +[[image:1657330472797-498.png]]
211 211  
212 -(((
213 -Ex1: 0x0B45 = 2885mV
214 -)))
215 215  
216 -(((
217 -Ex2: 0x0B49 = 2889mV
218 -)))
219 219  
232 +=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
220 220  
221 221  
222 -=== 2.3.4 Soil Moisture ===
235 +* (% style="color:blue" %)**AT+PRO=2   ** (%%) ~/~/ Set to use UDP protocol to uplink
236 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/ to set UDP server address and port
237 +* (% style="color:blue" %)**AT+CFM=1       ** (%%) ~/~/If the server does not respond, this command is unnecessary
223 223  
224 -(((
225 -Get the moisture content of the soil. The value range of the register is 0-10000(Decimal), divide this value by 100 to get the percentage of moisture in the soil.
226 -)))
239 +[[image:1657330501006-241.png]]
227 227  
228 -(((
229 -For example, if the data you get from the register is __0x05 0xDC__, the moisture content in the soil is
230 -)))
231 231  
232 -(((
233 -
234 -)))
242 +[[image:1657330533775-472.png]]
235 235  
236 -(((
237 -(% style="color:#4f81bd" %)**05DC(H) = 1500(D) /100 = 15%.**
238 -)))
239 239  
240 240  
246 +=== 2.2.6 Use MQTT protocol to uplink data ===
241 241  
242 -=== 2.3.5 Soil Temperature ===
243 243  
244 -(((
245 - Get the temperature in the soil. The value range of the register is -4000 - +800(Decimal), divide this value by 100 to get the temperature in the soil. For example, if the data you get from the register is 0x09 0xEC, the temperature content in the soil is
246 -)))
249 +* (% style="color:blue" %)**AT+PRO=3   ** (%%) ~/~/Set to use MQTT protocol to uplink
250 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/Set MQTT server address and port
251 +* (% style="color:blue" %)**AT+CLIENT=CLIENT       ** (%%)~/~/Set up the CLIENT of MQTT
252 +* (% style="color:blue" %)**AT+UNAME=UNAME                               **(%%)~/~/Set the username of MQTT
253 +* (% style="color:blue" %)**AT+PWD=PWD                                        **(%%)~/~/Set the password of MQTT
254 +* (% style="color:blue" %)**AT+PUBTOPIC=NDDS75_PUB                 **(%%)~/~/Set the sending topic of MQTT
255 +* (% style="color:blue" %)**AT+SUBTOPIC=NDDS75_SUB          **(%%) ~/~/Set the subscription topic of MQTT
247 247  
248 -(((
249 -**Example**:
250 -)))
257 +[[image:1657249978444-674.png]]
251 251  
252 -(((
253 -If payload is 0105H: ((0x0105 & 0x8000)>>15 === 0),temp = 0105(H)/100 = 2.61 °C
254 -)))
255 255  
256 -(((
257 -If payload is FF7EH: ((FF7E & 0x8000)>>15 ===1),temp = (FF7E(H)-FFFF(H))/100 = -1.29 °C
258 -)))
260 +[[image:1657330723006-866.png]]
259 259  
260 260  
261 -
262 -=== 2.3.6 Soil Conductivity (EC) ===
263 -
264 264  (((
265 -Obtain (% style="color:#4f81bd" %)**__soluble salt concentration__**(%%) in soil or (% style="color:#4f81bd" %)**__soluble ion concentration in liquid fertilizer__**(%%) or (% style="color:#4f81bd" %)**__planting medium__**(%%). The value range of the register is 0 - 20000(Decimal)( Can be greater than 20000).
264 +MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
266 266  )))
267 267  
268 -(((
269 -For example, if the data you get from the register is 0x00 0xC8, the soil conductivity is 00C8(H) = 200(D) = 200 uS/cm.
270 -)))
271 271  
272 -(((
273 -Generally, the EC value of irrigation water is less than 800uS / cm.
274 -)))
275 275  
276 -(((
277 -
278 -)))
269 +=== 2.2.7 Use TCP protocol to uplink data ===
279 279  
280 -(((
281 -
282 -)))
283 283  
284 -=== 2.3.7 MOD ===
272 +* (% style="color:blue" %)**AT+PRO=4   ** (%%) ~/~/ Set to use TCP protocol to uplink
273 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5600   **(%%) ~/~/ to set TCP server address and port
285 285  
286 -Firmware version at least v2.1 supports changing mode.
275 +[[image:image-20220709093918-1.png]]
287 287  
288 -For example, bytes[10]=90
289 289  
290 -mod=(bytes[10]>>7)&0x01=1.
278 +[[image:image-20220709093918-2.png]]
291 291  
292 292  
293 -**Downlink Command:**
294 294  
295 -If payload = 0x0A00, workmode=0
282 +=== 2.2.8 Change Update Interval ===
296 296  
297 -If** **payload =** **0x0A01, workmode=1
284 +User can use below command to change the (% style="color:green" %)**uplink interval**.
298 298  
286 +* (% style="color:blue" %)**AT+TDC=600      ** (%%)~/~/ Set Update Interval to 600s
299 299  
300 -
301 -=== 2.3.8 ​Decode payload in The Things Network ===
302 -
303 -While using TTN network, you can add the payload format to decode the payload.
304 -
305 -
306 -[[image:1654505570700-128.png]]
307 -
308 308  (((
309 -The payload decoder function for TTN is here:
289 +(% style="color:red" %)**NOTE:**
310 310  )))
311 311  
312 312  (((
313 -LSE01 TTN Payload Decoder: [[https:~~/~~/www.dropbox.com/sh/si8icbrjlamxqdb/AAACYwjsxxr5fj_vpqRtrETAa?dl=0>>https://www.dropbox.com/sh/si8icbrjlamxqdb/AAACYwjsxxr5fj_vpqRtrETAa?dl=0]]
293 +(% style="color:red" %)1. By default, the device will send an uplink message every 1 hour.
314 314  )))
315 315  
316 316  
317 -== 2.4 Uplink Interval ==
318 318  
319 -The LSE01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
298 +== 2.3  Uplink Payload ==
320 320  
300 +In this mode, uplink payload includes in total 14 bytes
321 321  
322 322  
323 -== 2.5 Downlink Payload ==
303 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
304 +|=(% style="width: 60px;" %)(((
305 +**Size(bytes)**
306 +)))|=(% style="width: 50px;" %)**6**|=(% style="width: 25px;" %)2|=(% style="width: 25px;" %)**2**|=(% style="width: 70px;" %)**1**|=(% style="width: 60px;" %)**2**|=(% style="width: 50px;" %)**1**
307 +|(% style="width:97px" %)**Value**|(% style="width:83px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:41px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:123px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:108px" %)[[Distance (unit: mm)>>||anchor="H2.4.5A0SoilMoisture"]]|(% style="width:80px" %)[[Interrupt>>||anchor="H2.4.8A0DigitalInterrupt"]]
324 324  
325 -By default, LSE50 prints the downlink payload to console port.
309 +(((
310 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDDS751 uplink data.
311 +)))
326 326  
327 -[[image:image-20220606165544-8.png]]
328 328  
314 +[[image:1657331036973-987.png]]
329 329  
330 330  (((
331 -**Examples:**
317 +The payload is ASCII string, representative same HEX:
332 332  )))
333 333  
334 334  (((
335 -
321 +0x72403155615900640c6c19029200 where:
336 336  )))
337 337  
338 338  * (((
339 -**Set TDC**
325 +Device ID: 0x724031556159 = 724031556159
340 340  )))
341 -
342 -(((
343 -If the payload=0100003C, it means set the END Node’s TDC to 0x00003C=60(S), while type code is 01.
327 +* (((
328 +Version: 0x0064=100=1.0.0
344 344  )))
345 345  
346 -(((
347 -Payload:    01 00 00 1E    TDC=30S
331 +* (((
332 +BAT: 0x0c6c = 3180 mV = 3.180V
348 348  )))
349 -
350 -(((
351 -Payload:    01 00 00 3C    TDC=60S
334 +* (((
335 +Signal: 0x19 = 25
352 352  )))
353 -
354 -(((
355 -
337 +* (((
338 +Distance: 0x0292= 658 mm
356 356  )))
357 -
358 358  * (((
359 -**Reset**
341 +Interrupt: 0x00 = 0
360 360  )))
361 361  
362 -(((
363 -If payload = 0x04FF, it will reset the LSE01
364 -)))
365 365  
366 366  
367 -* **CFM**
368 368  
369 -Downlink Payload: 05000001, Set AT+CFM=1 or 05000000 , set AT+CFM=0
347 +== 2.4  Payload Explanation and Sensor Interface ==
370 370  
371 371  
350 +=== 2.4.1  Device ID ===
372 372  
373 -== 2.6 ​Show Data in DataCake IoT Server ==
352 +(((
353 +By default, the Device ID equal to the last 6 bytes of IMEI.
354 +)))
374 374  
375 375  (((
376 -[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
357 +User can use (% style="color:blue" %)**AT+DEUI**(%%) to set Device ID
377 377  )))
378 378  
379 379  (((
380 -
361 +**Example:**
381 381  )))
382 382  
383 383  (((
384 -(% style="color:blue" %)**Step 1**(%%):  Be sure that your device is programmed and properly connected to the network at this time.
365 +AT+DEUI=A84041F15612
385 385  )))
386 386  
387 387  (((
388 -(% style="color:blue" %)**Step 2**(%%):  To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
369 +The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
389 389  )))
390 390  
391 391  
392 -[[image:1654505857935-743.png]]
393 393  
374 +=== 2.4.2  Version Info ===
394 394  
395 -[[image:1654505874829-548.png]]
376 +(((
377 +Specify the software version: 0x64=100, means firmware version 1.00.
378 +)))
396 396  
380 +(((
381 +For example: 0x00 64 : this device is NSE01 with firmware version 1.0.0.
382 +)))
397 397  
398 -(% style="color:blue" %)**Step 3**(%%)**:**  Create an account or log in Datacake.
399 399  
400 -(% style="color:blue" %)**Step 4**(%%)**:**  Search the LSE01 and add DevEUI.
401 401  
386 +=== 2.4.3  Battery Info ===
402 402  
403 -[[image:1654505905236-553.png]]
388 +(((
389 +Check the battery voltage for LSE01.
390 +)))
404 404  
392 +(((
393 +Ex1: 0x0B45 = 2885mV
394 +)))
405 405  
406 -After added, the sensor data arrive TTN, it will also arrive and show in Mydevices.
396 +(((
397 +Ex2: 0x0B49 = 2889mV
398 +)))
407 407  
408 -[[image:1654505925508-181.png]]
409 409  
410 410  
402 +=== 2.4.4  Signal Strength ===
411 411  
412 -== 2.7 Frequency Plans ==
404 +(((
405 +NB-IoT Network signal Strength.
406 +)))
413 413  
414 -The LSE01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
408 +(((
409 +**Ex1: 0x1d = 29**
410 +)))
415 415  
412 +(((
413 +(% style="color:blue" %)**0**(%%)  -113dBm or less
414 +)))
416 416  
417 -=== 2.7.1 EU863-870 (EU868) ===
416 +(((
417 +(% style="color:blue" %)**1**(%%)  -111dBm
418 +)))
418 418  
419 -(% style="color:#037691" %)** Uplink:**
420 +(((
421 +(% style="color:blue" %)**2...30**(%%) -109dBm... -53dBm
422 +)))
420 420  
421 -868.1 - SF7BW125 to SF12BW125
424 +(((
425 +(% style="color:blue" %)**31**  (%%) -51dBm or greater
426 +)))
422 422  
423 -868.3 - SF7BW125 to SF12BW125 and SF7BW250
428 +(((
429 +(% style="color:blue" %)**99**   (%%) Not known or not detectable
430 +)))
424 424  
425 -868.5 - SF7BW125 to SF12BW125
426 426  
427 -867.1 - SF7BW125 to SF12BW125
428 428  
429 -867.3 - SF7BW125 to SF12BW125
434 +=== 2.4.5  Soil Moisture ===
430 430  
431 -867.5 - SF7BW125 to SF12BW125
436 +(((
437 +(((
438 +Get the moisture content of the soil. The value range of the register is 0-10000(Decimal), divide this value by 100 to get the percentage of moisture in the soil.
439 +)))
440 +)))
432 432  
433 -867.7 - SF7BW125 to SF12BW125
442 +(((
443 +(((
444 +For example, if the data you get from the register is **__0x05 0xDC__**, the moisture content in the soil is
445 +)))
446 +)))
434 434  
435 -867.9 - SF7BW125 to SF12BW125
448 +(((
449 +
450 +)))
436 436  
437 -868.8 - FSK
452 +(((
453 +(% style="color:#4f81bd" %)**05DC(H) = 1500(D) /100 = 15%.**
454 +)))
438 438  
439 439  
440 -(% style="color:#037691" %)** Downlink:**
441 441  
442 -Uplink channels 1-9 (RX1)
458 +=== 2.4.6  Soil Temperature ===
443 443  
444 -869.525 - SF9BW125 (RX2 downlink only)
460 +(((
461 +Get the temperature in the soil. The value range of the register is -4000 - +800(Decimal), divide this value by 100 to get the temperature in the soil. For example, if the data you get from the register is __**0x09 0xEC**__, the temperature content in the soil is
462 +)))
445 445  
464 +(((
465 +**Example**:
466 +)))
446 446  
468 +(((
469 +If payload is 0105H: ((0x0105 & 0x8000)>>15 === 0),temp = 0105(H)/100 = 2.61 °C
470 +)))
447 447  
448 -=== 2.7.2 US902-928(US915) ===
472 +(((
473 +If payload is FF7EH: ((FF7E & 0x8000)>>15 ===1),temp = (FF7E(H)-FFFF(H))/100 = -1.29 °C
474 +)))
449 449  
450 -Used in USA, Canada and South America. Default use CHE=2
451 451  
452 -(% style="color:#037691" %)**Uplink:**
453 453  
454 -903.9 - SF7BW125 to SF10BW125
478 +=== 2.4.7  Soil Conductivity (EC) ===
455 455  
456 -904.1 - SF7BW125 to SF10BW125
480 +(((
481 +Obtain (% style="color:#4f81bd" %)**__soluble salt concentration__**(%%) in soil or (% style="color:#4f81bd" %)**__soluble ion concentration in liquid fertilizer__**(%%) or (% style="color:#4f81bd" %)**__planting medium__**(%%). The value range of the register is 0 - 20000(Decimal)( Can be greater than 20000).
482 +)))
457 457  
458 -904.3 - SF7BW125 to SF10BW125
484 +(((
485 +For example, if the data you get from the register is __**0x00 0xC8**__, the soil conductivity is 00C8(H) = 200(D) = 200 uS/cm.
486 +)))
459 459  
460 -904.5 - SF7BW125 to SF10BW125
488 +(((
489 +Generally, the EC value of irrigation water is less than 800uS / cm.
490 +)))
461 461  
462 -904.7 - SF7BW125 to SF10BW125
492 +(((
493 +
494 +)))
463 463  
464 -904.9 - SF7BW125 to SF10BW125
496 +(((
497 +
498 +)))
465 465  
466 -905.1 - SF7BW125 to SF10BW125
500 +=== 2.4.8  Digital Interrupt ===
467 467  
468 -905.3 - SF7BW125 to SF10BW125
502 +(((
503 +Digital Interrupt refers to pin (% style="color:blue" %)**GPIO_EXTI**(%%), and there are different trigger methods. When there is a trigger, the NSE01 will send a packet to the server.
504 +)))
469 469  
506 +(((
507 +The command is:
508 +)))
470 470  
471 -(% style="color:#037691" %)**Downlink:**
510 +(((
511 +(% style="color:blue" %)**AT+INTMOD=3 **(%%) ~/~/(more info about INMOD please refer [[**AT Command Manual**>>url:https://www.dragino.com/downloads/downloads/NB-IoT/NBSN95/DRAGINO_NBSN95-NB_AT%20Commands_v1.1.0.pdf]])**.**
512 +)))
472 472  
473 -923.3 - SF7BW500 to SF12BW500
474 474  
475 -923.9 - SF7BW500 to SF12BW500
515 +(((
516 +The lower four bits of this data field shows if this packet is generated by interrupt or not. Click here for the hardware and software set up.
517 +)))
476 476  
477 -924.5 - SF7BW500 to SF12BW500
478 478  
479 -925.1 - SF7BW500 to SF12BW500
520 +(((
521 +Example:
522 +)))
480 480  
481 -925.7 - SF7BW500 to SF12BW500
524 +(((
525 +0x(00): Normal uplink packet.
526 +)))
482 482  
483 -926.3 - SF7BW500 to SF12BW500
528 +(((
529 +0x(01): Interrupt Uplink Packet.
530 +)))
484 484  
485 -926.9 - SF7BW500 to SF12BW500
486 486  
487 -927.5 - SF7BW500 to SF12BW500
488 488  
489 -923.3 - SF12BW500(RX2 downlink only)
534 +=== 2.4.9  ​+5V Output ===
490 490  
536 +(((
537 +NSE01 will enable +5V output before all sampling and disable the +5v after all sampling. 
538 +)))
491 491  
492 492  
493 -=== 2.7.3 CN470-510 (CN470) ===
541 +(((
542 +The 5V output time can be controlled by AT Command.
543 +)))
494 494  
495 -Used in China, Default use CHE=1
545 +(((
546 +(% style="color:blue" %)**AT+5VT=1000**
547 +)))
496 496  
497 -(% style="color:#037691" %)**Uplink:**
549 +(((
550 +Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
551 +)))
498 498  
499 -486.3 - SF7BW125 to SF12BW125
500 500  
501 -486.5 - SF7BW125 to SF12BW125
502 502  
503 -486.7 - SF7BW125 to SF12BW125
555 +== 2.5  Downlink Payload ==
504 504  
505 -486.9 - SF7BW125 to SF12BW125
557 +By default, NSE01 prints the downlink payload to console port.
506 506  
507 -487.1 - SF7BW125 to SF12BW125
559 +[[image:image-20220708133731-5.png]]
508 508  
509 -487.3 - SF7BW125 to SF12BW125
510 510  
511 -487.5 - SF7BW125 to SF12BW125
562 +(((
563 +(% style="color:blue" %)**Examples:**
564 +)))
512 512  
513 -487.7 - SF7BW125 to SF12BW125
566 +(((
567 +
568 +)))
514 514  
570 +* (((
571 +(% style="color:blue" %)**Set TDC**
572 +)))
515 515  
516 -(% style="color:#037691" %)**Downlink:**
574 +(((
575 +If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
576 +)))
517 517  
518 -506.7 - SF7BW125 to SF12BW125
578 +(((
579 +Payload:    01 00 00 1E    TDC=30S
580 +)))
519 519  
520 -506.9 - SF7BW125 to SF12BW125
582 +(((
583 +Payload:    01 00 00 3C    TDC=60S
584 +)))
521 521  
522 -507.1 - SF7BW125 to SF12BW125
586 +(((
587 +
588 +)))
523 523  
524 -507.3 - SF7BW125 to SF12BW125
590 +* (((
591 +(% style="color:blue" %)**Reset**
592 +)))
525 525  
526 -507.5 - SF7BW125 to SF12BW125
594 +(((
595 +If payload = 0x04FF, it will reset the NSE01
596 +)))
527 527  
528 -507.7 - SF7BW125 to SF12BW125
529 529  
530 -507.9 - SF7BW125 to SF12BW125
599 +* (% style="color:blue" %)**INTMOD**
531 531  
532 -508.1 - SF7BW125 to SF12BW125
601 +(((
602 +Downlink Payload: 06000003, Set AT+INTMOD=3
603 +)))
533 533  
534 -505.3 - SF12BW125 (RX2 downlink only)
535 535  
536 536  
607 +== 2.6  ​LED Indicator ==
537 537  
538 -=== 2.7.4 AU915-928(AU915) ===
609 +(((
610 +The NSE01 has an internal LED which is to show the status of different state.
539 539  
540 -Default use CHE=2
541 541  
542 -(% style="color:#037691" %)**Uplink:**
613 +* When power on, NSE01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
614 +* Then the LED will be on for 1 second means device is boot normally.
615 +* After NSE01 join NB-IoT network. The LED will be ON for 3 seconds.
616 +* For each uplink probe, LED will be on for 500ms.
617 +)))
543 543  
544 -916.8 - SF7BW125 to SF12BW125
545 545  
546 -917.0 - SF7BW125 to SF12BW125
547 547  
548 -917.2 - SF7BW125 to SF12BW125
549 549  
550 -917.4 - SF7BW125 to SF12BW125
622 +== 2.7  Installation in Soil ==
551 551  
552 -917.6 - SF7BW125 to SF12BW125
624 +__**Measurement the soil surface**__
553 553  
554 -917.8 - SF7BW125 to SF12BW125
626 +(((
627 +Choose the proper measuring position. Avoid the probe to touch rocks or hard things. Split the surface soil according to the measured deep. Keep the measured as original density. Vertical insert the probe into the soil to be measured. Make sure not shake when inserting. [[https:~~/~~/img.alicdn.com/imgextra/i3/2005165265/O1CN010rj9Oh1olPsQxrdUK_!!2005165265.jpg>>url:https://img.alicdn.com/imgextra/i3/2005165265/O1CN010rj9Oh1olPsQxrdUK_!!2005165265.jpg]]
628 +)))
555 555  
556 -918.0 - SF7BW125 to SF12BW125
630 +[[image:1657259653666-883.png]] ​
557 557  
558 -918.2 - SF7BW125 to SF12BW125
559 559  
633 +(((
634 +
560 560  
561 -(% style="color:#037691" %)**Downlink:**
636 +(((
637 +Dig a hole with diameter > 20CM.
638 +)))
562 562  
563 -923.3 - SF7BW500 to SF12BW500
640 +(((
641 +Horizontal insert the probe to the soil and fill the hole for long term measurement.
642 +)))
643 +)))
564 564  
565 -923.9 - SF7BW500 to SF12BW500
645 +[[image:1654506665940-119.png]]
566 566  
567 -924.5 - SF7BW500 to SF12BW500
647 +(((
648 +
649 +)))
568 568  
569 -925.1 - SF7BW500 to SF12BW500
570 570  
571 -925.7 - SF7BW500 to SF12BW500
652 +== 2.8  ​Firmware Change Log ==
572 572  
573 -926.3 - SF7BW500 to SF12BW500
574 574  
575 -926.9 - SF7BW500 to SF12BW500
655 +Download URL & Firmware Change log
576 576  
577 -927.5 - SF7BW500 to SF12BW500
657 +[[www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/Firmware/]]
578 578  
579 -923.3 - SF12BW500(RX2 downlink only)
580 580  
660 +Upgrade Instruction: [[Upgrade_Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
581 581  
582 582  
583 -=== 2.7.5 AS920-923 & AS923-925 (AS923) ===
584 584  
585 -(% style="color:#037691" %)**Default Uplink channel:**
664 +== 2.9  ​Battery Analysis ==
586 586  
587 -923.2 - SF7BW125 to SF10BW125
666 +=== 2.9.1  ​Battery Type ===
588 588  
589 -923.4 - SF7BW125 to SF10BW125
590 590  
591 -
592 -(% style="color:#037691" %)**Additional Uplink Channel**:
593 -
594 -(OTAA mode, channel added by JoinAccept message)
595 -
596 -(% style="color:#037691" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
597 -
598 -922.2 - SF7BW125 to SF10BW125
599 -
600 -922.4 - SF7BW125 to SF10BW125
601 -
602 -922.6 - SF7BW125 to SF10BW125
603 -
604 -922.8 - SF7BW125 to SF10BW125
605 -
606 -923.0 - SF7BW125 to SF10BW125
607 -
608 -922.0 - SF7BW125 to SF10BW125
609 -
610 -
611 -(% style="color:#037691" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
612 -
613 -923.6 - SF7BW125 to SF10BW125
614 -
615 -923.8 - SF7BW125 to SF10BW125
616 -
617 -924.0 - SF7BW125 to SF10BW125
618 -
619 -924.2 - SF7BW125 to SF10BW125
620 -
621 -924.4 - SF7BW125 to SF10BW125
622 -
623 -924.6 - SF7BW125 to SF10BW125
624 -
625 -
626 -(% style="color:#037691" %)** Downlink:**
627 -
628 -Uplink channels 1-8 (RX1)
629 -
630 -923.2 - SF10BW125 (RX2)
631 -
632 -
633 -
634 -=== 2.7.6 KR920-923 (KR920) ===
635 -
636 -Default channel:
637 -
638 -922.1 - SF7BW125 to SF12BW125
639 -
640 -922.3 - SF7BW125 to SF12BW125
641 -
642 -922.5 - SF7BW125 to SF12BW125
643 -
644 -
645 -(% style="color:#037691" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
646 -
647 -922.1 - SF7BW125 to SF12BW125
648 -
649 -922.3 - SF7BW125 to SF12BW125
650 -
651 -922.5 - SF7BW125 to SF12BW125
652 -
653 -922.7 - SF7BW125 to SF12BW125
654 -
655 -922.9 - SF7BW125 to SF12BW125
656 -
657 -923.1 - SF7BW125 to SF12BW125
658 -
659 -923.3 - SF7BW125 to SF12BW125
660 -
661 -
662 -(% style="color:#037691" %)**Downlink:**
663 -
664 -Uplink channels 1-7(RX1)
665 -
666 -921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
667 -
668 -
669 -
670 -=== 2.7.7 IN865-867 (IN865) ===
671 -
672 -(% style="color:#037691" %)** Uplink:**
673 -
674 -865.0625 - SF7BW125 to SF12BW125
675 -
676 -865.4025 - SF7BW125 to SF12BW125
677 -
678 -865.9850 - SF7BW125 to SF12BW125
679 -
680 -
681 -(% style="color:#037691" %) **Downlink:**
682 -
683 -Uplink channels 1-3 (RX1)
684 -
685 -866.550 - SF10BW125 (RX2)
686 -
687 -
688 -
689 -
690 -== 2.8 LED Indicator ==
691 -
692 -The LSE01 has an internal LED which is to show the status of different state.
693 -
694 -* Blink once when device power on.
695 -* Solid ON for 5 seconds once device successful Join the network.
696 -* Blink once when device transmit a packet.
697 -
698 -
699 -
700 -
701 -
702 -
703 -== 2.9 Installation in Soil ==
704 -
705 -**Measurement the soil surface**
706 -
707 -
708 -[[image:1654506634463-199.png]] ​
709 -
710 710  (((
711 -(((
712 -Choose the proper measuring position. Avoid the probe to touch rocks or hard things. Split the surface soil according to the measured deep. Keep the measured as original density. Vertical insert the probe into the soil to be measured. Make sure not shake when inserting.
670 +The NSE01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
713 713  )))
714 -)))
715 715  
716 716  
717 -
718 -[[image:1654506665940-119.png]]
719 -
720 720  (((
721 -Dig a hole with diameter > 20CM.
675 +The battery is designed to last for several years depends on the actually use environment and update interval. 
722 722  )))
723 723  
724 -(((
725 -Horizontal insert the probe to the soil and fill the hole for long term measurement.
726 -)))
727 727  
728 -
729 -== 2.10 ​Firmware Change Log ==
730 -
731 731  (((
732 -**Firmware download link:**
680 +The battery related documents as below:
733 733  )))
734 734  
735 -(((
736 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
737 -)))
683 +* [[Battery Dimension>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
684 +* [[Lithium-Thionyl Chloride Battery datasheet>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
685 +* [[Lithium-ion Battery-Capacitor datasheet>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
738 738  
739 739  (((
740 -
688 +[[image:image-20220708140453-6.png]]
741 741  )))
742 742  
743 -(((
744 -**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]
745 -)))
746 746  
747 -(((
748 -
749 -)))
750 750  
751 -(((
752 -**V1.0.**
753 -)))
693 +=== 2.9.2  Power consumption Analyze ===
754 754  
755 755  (((
756 -Release
696 +Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
757 757  )))
758 758  
759 759  
760 -== 2.11 ​Battery Analysis ==
761 -
762 -=== 2.11.1 ​Battery Type ===
763 -
764 764  (((
765 -The LSE01 battery is a combination of a 4000mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
701 +Instruction to use as below:
766 766  )))
767 767  
768 768  (((
769 -The battery is designed to last for more than 5 years for the LSN50.
705 +(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
770 770  )))
771 771  
708 +
772 772  (((
773 -(((
774 -The battery-related documents are as below:
710 +(% style="color:blue" %)**Step 2: **(%%) Open it and choose
775 775  )))
776 -)))
777 777  
778 778  * (((
779 -[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
714 +Product Model
780 780  )))
781 781  * (((
782 -[[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
717 +Uplink Interval
783 783  )))
784 784  * (((
785 -[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
720 +Working Mode
786 786  )))
787 787  
788 - [[image:image-20220610172436-1.png]]
723 +(((
724 +And the Life expectation in difference case will be shown on the right.
725 +)))
789 789  
727 +[[image:image-20220708141352-7.jpeg]]
790 790  
791 791  
792 -=== 2.11.2 ​Battery Note ===
793 793  
731 +=== 2.9.3  ​Battery Note ===
732 +
794 794  (((
795 795  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
796 796  )))
... ... @@ -797,298 +797,176 @@
797 797  
798 798  
799 799  
800 -=== 2.11.3 Replace the battery ===
739 +=== 2.9.4  Replace the battery ===
801 801  
802 802  (((
803 -If Battery is lower than 2.7v, user should replace the battery of LSE01.
742 +The default battery pack of NSE01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
804 804  )))
805 805  
745 +
746 +
747 += 3. ​ Access NB-IoT Module =
748 +
806 806  (((
807 -You can change the battery in the LSE01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
750 +Users can directly access the AT command set of the NB-IoT module.
808 808  )))
809 809  
810 810  (((
811 -The default battery pack of LSE01 includes a ER18505 plus super capacitor. If user can’t find this pack locally, they can find ER18505 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
754 +The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
812 812  )))
813 813  
757 +[[image:1657261278785-153.png]]
814 814  
815 815  
816 -= 3. ​Using the AT Commands =
817 817  
818 -== 3.1 Access AT Commands ==
761 += 4.  Using the AT Commands =
819 819  
763 +== 4.1  Access AT Commands ==
820 820  
821 -LSE01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSE01 for using AT command, as below.
765 +See this link for detail: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/]]
822 822  
823 -[[image:1654501986557-872.png||height="391" width="800"]]
824 824  
768 +AT+<CMD>?  : Help on <CMD>
825 825  
826 -Or if you have below board, use below connection:
770 +AT+<CMD>         : Run <CMD>
827 827  
772 +AT+<CMD>=<value> : Set the value
828 828  
829 -[[image:1654502005655-729.png||height="503" width="801"]]
774 +AT+<CMD>=?  : Get the value
830 830  
831 831  
832 -
833 -In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSE01. LSE01 will output system info once power on as below:
834 -
835 -
836 - [[image:1654502050864-459.png||height="564" width="806"]]
837 -
838 -
839 -Below are the available commands, a more detailed AT Command manual can be found at [[AT Command Manual>>https://www.dropbox.com/sh/qr6vproz4z4kzjz/AAAD48h3OyWrU1hq_Cqm8jIwa?dl=0]]: [[https:~~/~~/www.dropbox.com/sh/qr6vproz4z4kzjz/AAAD48h3OyWrU1hq_Cqm8jIwa?dl=0>>https://www.dropbox.com/sh/qr6vproz4z4kzjz/AAAD48h3OyWrU1hq_Cqm8jIwa?dl=0]]
840 -
841 -
842 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>? **(%%) : Help on <CMD>
843 -
844 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD> **(%%) : Run <CMD>
845 -
846 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>=<value>**(%%) : Set the value
847 -
848 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>=?**(%%)  : Get the value
849 -
850 -
851 851  (% style="color:#037691" %)**General Commands**(%%)      
852 852  
853 -(% style="background-color:#dcdcdc" %)**AT**(%%)  : Attention       
779 +AT  : Attention       
854 854  
855 -(% style="background-color:#dcdcdc" %)**AT?**(%%)  : Short Help     
781 +AT?  : Short Help     
856 856  
857 -(% style="background-color:#dcdcdc" %)**ATZ**(%%)  : MCU Reset    
783 +ATZ  : MCU Reset    
858 858  
859 -(% style="background-color:#dcdcdc" %)**AT+TDC**(%%)  : Application Data Transmission Interval 
785 +AT+TDC  : Application Data Transmission Interval
860 860  
787 +AT+CFG  : Print all configurations
861 861  
862 -(% style="color:#037691" %)**Keys, IDs and EUIs management**
789 +AT+CFGMOD           : Working mode selection
863 863  
864 -(% style="background-color:#dcdcdc" %)**AT+APPEUI**(%%)              : Application EUI      
791 +AT+INTMOD            : Set the trigger interrupt mode
865 865  
866 -(% style="background-color:#dcdcdc" %)**AT+APPKEY**(%%)              : Application Key     
793 +AT+5VT  : Set extend the time of 5V power  
867 867  
868 -(% style="background-color:#dcdcdc" %)**AT+APPSKEY**(%%)            : Application Session Key
795 +AT+PRO  : Choose agreement
869 869  
870 -(% style="background-color:#dcdcdc" %)**AT+DADDR**(%%)              : Device Address     
797 +AT+WEIGRE  : Get weight or set weight to 0
871 871  
872 -(% style="background-color:#dcdcdc" %)**AT+DEUI**(%%)                   : Device EUI     
799 +AT+WEIGAP  : Get or Set the GapValue of weight
873 873  
874 -(% style="background-color:#dcdcdc" %)**AT+NWKID**(%%)               : Network ID (You can enter this command change only after successful network connection) 
801 +AT+RXDL  : Extend the sending and receiving time
875 875  
876 -(% style="background-color:#dcdcdc" %)**AT+NWKSKEY**(%%)          : Network Session Key Joining and sending date on LoRa network  
803 +AT+CNTFAC  : Get or set counting parameters
877 877  
878 -(% style="background-color:#dcdcdc" %)**AT+CFM**(%%)  : Confirm Mode       
805 +AT+SERVADDR  : Server Address
879 879  
880 -(% style="background-color:#dcdcdc" %)**AT+CFS**(%%)                     : Confirm Status       
881 881  
882 -(% style="background-color:#dcdcdc" %)**AT+JOIN**(%%)  : Join LoRa? Network       
808 +(% style="color:#037691" %)**COAP Management**      
883 883  
884 -(% style="background-color:#dcdcdc" %)**AT+NJM**(%%)  : LoRa? Network Join Mode    
810 +AT+URI            : Resource parameters
885 885  
886 -(% style="background-color:#dcdcdc" %)**AT+NJS**(%%)                     : LoRa? Network Join Status    
887 887  
888 -(% style="background-color:#dcdcdc" %)**AT+RECV**(%%)                  : Print Last Received Data in Raw Format
813 +(% style="color:#037691" %)**UDP Management**
889 889  
890 -(% style="background-color:#dcdcdc" %)**AT+RECVB**(%%)                : Print Last Received Data in Binary Format      
815 +AT+CFM          : Upload confirmation mode (only valid for UDP)
891 891  
892 -(% style="background-color:#dcdcdc" %)**AT+SEND**(%%)                  : Send Text Data      
893 893  
894 -(% style="background-color:#dcdcdc" %)**AT+SENB**(%%)                  : Send Hexadecimal Data
818 +(% style="color:#037691" %)**MQTT Management**
895 895  
820 +AT+CLIENT               : Get or Set MQTT client
896 896  
897 -(% style="color:#037691" %)**LoRa Network Management**
822 +AT+UNAME  : Get or Set MQTT Username
898 898  
899 -(% style="background-color:#dcdcdc" %)**AT+ADR**(%%)          : Adaptive Rate
824 +AT+PWD                  : Get or Set MQTT password
900 900  
901 -(% style="background-color:#dcdcdc" %)**AT+CLASS**(%%)  : LoRa Class(Currently only support class A
826 +AT+PUBTOPIC  : Get or Set MQTT publish topic
902 902  
903 -(% style="background-color:#dcdcdc" %)**AT+DCS**(%%)  : Duty Cycle Setting 
828 +AT+SUBTOPIC  : Get or Set MQTT subscription topic
904 904  
905 -(% style="background-color:#dcdcdc" %)**AT+DR**(%%)  : Data Rate (Can Only be Modified after ADR=0)     
906 906  
907 -(% style="background-color:#dcdcdc" %)**AT+FCD**(%%)  : Frame Counter Downlink       
831 +(% style="color:#037691" %)**Information**          
908 908  
909 -(% style="background-color:#dcdcdc" %)**AT+FCU**(%%)  : Frame Counter Uplink   
833 +AT+FDR  : Factory Data Reset
910 910  
911 -(% style="background-color:#dcdcdc" %)**AT+JN1DL**(%%)  : Join Accept Delay1
835 +AT+PWORD  : Serial Access Password
912 912  
913 -(% style="background-color:#dcdcdc" %)**AT+JN2DL**(%%)  : Join Accept Delay2
914 914  
915 -(% style="background-color:#dcdcdc" %)**AT+PNM**(%%)  : Public Network Mode   
916 916  
917 -(% style="background-color:#dcdcdc" %)**AT+RX1DL**(%%)  : Receive Delay1      
839 += ​5.  FAQ =
918 918  
919 -(% style="background-color:#dcdcdc" %)**AT+RX2DL**(%%)  : Receive Delay2      
841 +== 5.1 ​ How to Upgrade Firmware ==
920 920  
921 -(% style="background-color:#dcdcdc" %)**AT+RX2DR**(%%)  : Rx2 Window Data Rate 
922 922  
923 -(% style="background-color:#dcdcdc" %)**AT+RX2FQ**(%%)  : Rx2 Window Frequency
924 -
925 -(% style="background-color:#dcdcdc" %)**AT+TXP**(%%)  : Transmit Power
926 -
927 -(% style="background-color:#dcdcdc" %)**AT+ MOD**(%%)  : Set work mode
928 -
929 -
930 -(% style="color:#037691" %)**Information** 
931 -
932 -(% style="background-color:#dcdcdc" %)**AT+RSSI**(%%)           : RSSI of the Last Received Packet   
933 -
934 -(% style="background-color:#dcdcdc" %)**AT+SNR**(%%)           : SNR of the Last Received Packet   
935 -
936 -(% style="background-color:#dcdcdc" %)**AT+VER**(%%)           : Image Version and Frequency Band       
937 -
938 -(% style="background-color:#dcdcdc" %)**AT+FDR**(%%)           : Factory Data Reset
939 -
940 -(% style="background-color:#dcdcdc" %)**AT+PORT**(%%)  : Application Port    
941 -
942 -(% style="background-color:#dcdcdc" %)**AT+CHS**(%%)  : Get or Set Frequency (Unit: Hz) for Single Channel Mode
943 -
944 - (% style="background-color:#dcdcdc" %)**AT+CHE**(%%)  : Get or Set eight channels mode, Only for US915, AU915, CN470
945 -
946 -
947 -= ​4. FAQ =
948 -
949 -== 4.1 ​How to change the LoRa Frequency Bands/Region? ==
950 -
951 951  (((
952 -You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
953 -When downloading the images, choose the required image file for download. ​
845 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
954 954  )))
955 955  
956 956  (((
957 -
849 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
958 958  )))
959 959  
960 960  (((
961 -How to set up LSE01 to work in 8 channel mode By default, the frequency bands US915, AU915, CN470 work in 72 frequencies. Many gateways are 8 channel gateways, and in this case, the OTAA join time and uplink schedule is long and unpredictable while the end node is hopping in 72 frequencies.
853 +(% style="color:red" %)Notice, NSE01 and LSE01 share the same mother board. They use the same connection and method to update.
962 962  )))
963 963  
964 -(((
965 -
966 -)))
967 967  
968 -(((
969 -You can configure the end node to work in 8 channel mode by using the AT+CHE command. The 500kHz channels are always included for OTAA.
970 -)))
971 971  
972 -(((
973 -
974 -)))
858 +== 5.2  Can I calibrate NSE01 to different soil types? ==
975 975  
976 976  (((
977 -For example, in **US915** band, the frequency table is as below. By default, the end node will use all channels (0~~71) for OTAA Join process. After the OTAA Join, the end node will use these all channels (0~~71) to send uplink packets.
861 +NSE01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
978 978  )))
979 979  
980 -[[image:image-20220606154726-3.png]]
981 981  
865 += 6.  Trouble Shooting =
982 982  
983 -When you use the TTN network, the US915 frequency bands use are:
867 +== 6.1  ​Connection problem when uploading firmware ==
984 984  
985 -* 903.9 - SF7BW125 to SF10BW125
986 -* 904.1 - SF7BW125 to SF10BW125
987 -* 904.3 - SF7BW125 to SF10BW125
988 -* 904.5 - SF7BW125 to SF10BW125
989 -* 904.7 - SF7BW125 to SF10BW125
990 -* 904.9 - SF7BW125 to SF10BW125
991 -* 905.1 - SF7BW125 to SF10BW125
992 -* 905.3 - SF7BW125 to SF10BW125
993 -* 904.6 - SF8BW500
994 994  
995 995  (((
996 -Because the end node is now hopping in 72 frequency, it makes it difficult for the devices to Join the TTN network and uplink data. To solve this issue, you can access the device via the AT commands and run:
997 -
998 -* (% style="color:#037691" %)**AT+CHE=2**
999 -* (% style="color:#037691" %)**ATZ**
871 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
1000 1000  )))
1001 1001  
874 +(% class="wikigeneratedid" %)
1002 1002  (((
1003 1003  
1004 -
1005 -to set the end node to work in 8 channel mode. The device will work in Channel 8-15 & 64-71 for OTAA, and channel 8-15 for Uplink.
1006 1006  )))
1007 1007  
1008 -(((
1009 -
1010 -)))
1011 1011  
1012 -(((
1013 -The **AU915** band is similar. Below are the AU915 Uplink Channels.
1014 -)))
880 +== 6.2  AT Command input doesn't work ==
1015 1015  
1016 -[[image:image-20220606154825-4.png]]
1017 -
1018 -
1019 -
1020 -= 5. Trouble Shooting =
1021 -
1022 -== 5.1 ​Why I can’t join TTN in US915 / AU915 bands? ==
1023 -
1024 -It is due to channel mapping. Please see the [[Eight Channel Mode>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]] section above for details.
1025 -
1026 -
1027 -== 5.2 AT Command input doesn’t work ==
1028 -
1029 1029  (((
1030 -In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1031 -)))
883 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1032 1032  
1033 -
1034 -== 5.3 Device rejoin in at the second uplink packet ==
1035 -
1036 -(% style="color:#4f81bd" %)**Issue describe as below:**
1037 -
1038 -[[image:1654500909990-784.png]]
1039 -
1040 -
1041 -(% style="color:#4f81bd" %)**Cause for this issue:**
1042 -
1043 -(((
1044 -The fuse on LSE01 is not large enough, some of the soil probe require large current up to 5v 800mA, in a short pulse. When this happen, it cause the device reboot so user see rejoin.
885 +
1045 1045  )))
1046 1046  
1047 1047  
1048 -(% style="color:#4f81bd" %)**Solution: **
889 += 7. ​ Order Info =
1049 1049  
1050 -All new shipped LSE01 after 2020-May-30 will have this to fix. For the customer who see this issue, please bypass the fuse as below:
1051 1051  
1052 -[[image:1654500929571-736.png||height="458" width="832"]]
892 +Part Number**:** (% style="color:#4f81bd" %)**NSE01**
1053 1053  
1054 1054  
1055 -= 6. ​Order Info =
1056 -
1057 -
1058 -Part Number**:** (% style="color:#4f81bd" %)**LSE01-XX-YY**
1059 -
1060 -
1061 -(% style="color:#4f81bd" %)**XX**(%%)**:** The default frequency band
1062 -
1063 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1064 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1065 -* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
1066 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1067 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1068 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1069 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1070 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1071 -
1072 -(% style="color:#4f81bd" %)**YY**(%%)**: **Battery Option
1073 -
1074 -* (% style="color:red" %)**4**(%%): 4000mAh battery
1075 -* (% style="color:red" %)**8**(%%): 8500mAh battery
1076 -
1077 1077  (% class="wikigeneratedid" %)
1078 1078  (((
1079 1079  
1080 1080  )))
1081 1081  
1082 -= 7. Packing Info =
900 += 8.  Packing Info =
1083 1083  
1084 1084  (((
1085 1085  
1086 1086  
1087 1087  (% style="color:#037691" %)**Package Includes**:
1088 -)))
1089 1089  
1090 -* (((
1091 -LSE01 LoRaWAN Soil Moisture & EC Sensor x 1
907 +* NSE01 NB-IoT Soil Moisture & EC Sensor x 1
908 +* External antenna x 1
1092 1092  )))
1093 1093  
1094 1094  (((
... ... @@ -1095,24 +1095,19 @@
1095 1095  
1096 1096  
1097 1097  (% style="color:#037691" %)**Dimension and weight**:
1098 -)))
1099 1099  
1100 -* (((
1101 -Device Size: cm
916 +* Size: 195 x 125 x 55 mm
917 +* Weight:   420g
1102 1102  )))
1103 -* (((
1104 -Device Weight: g
1105 -)))
1106 -* (((
1107 -Package Size / pcs : cm
1108 -)))
1109 -* (((
1110 -Weight / pcs : g
1111 1111  
920 +(((
1112 1112  
922 +
923 +
924 +
1113 1113  )))
1114 1114  
1115 -= 8. Support =
927 += 9.  Support =
1116 1116  
1117 1117  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1118 1118  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1657245163077-232.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +81.0 KB
Content
1657246476176-652.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +492.6 KB
Content
1657249419225-449.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +81.0 KB
Content
1657249468462-536.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +483.6 KB
Content
1657249793983-486.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.8 KB
Content
1657249831934-534.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +72.5 KB
Content
1657249864775-321.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.0 KB
Content
1657249930215-289.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +77.3 KB
Content
1657249978444-674.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +139.5 KB
Content
1657249990869-686.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.9 KB
Content
1657250217799-140.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.7 KB
Content
1657250255956-604.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +99.0 KB
Content
1657259653666-883.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +344.4 KB
Content
1657260785982-288.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +138.2 KB
Content
1657261119050-993.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +126.1 KB
Content
1657261278785-153.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +126.1 KB
Content
1657271519014-786.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +71.5 KB
Content
1657327959271-447.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +78.3 KB
Content
1657328609906-564.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +492.6 KB
Content
1657328659945-416.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +78.8 KB
Content
1657328756309-230.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +78.5 KB
Content
1657328884227-504.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +483.6 KB
Content
1657329814315-101.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.3 KB
Content
1657330452568-615.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +71.3 KB
Content
1657330472797-498.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +68.9 KB
Content
1657330501006-241.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.2 KB
Content
1657330533775-472.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +74.9 KB
Content
1657330723006-866.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +74.1 KB
Content
1657331036973-987.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +83.8 KB
Content
image-20220708101224-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +22.2 KB
Content
image-20220708101605-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.5 KB
Content
image-20220708110657-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +251.7 KB
Content
image-20220708111918-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +38.8 KB
Content
image-20220708133731-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +8.7 KB
Content
image-20220708140453-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +132.7 KB
Content
image-20220708141352-7.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +102.7 KB
Content
image-20220709084038-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +72.0 KB
Content
image-20220709084137-2.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +72.0 KB
Content
image-20220709084207-3.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +72.0 KB
Content
image-20220709084458-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +199.5 KB
Content
image-20220709085040-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +200.4 KB
Content
image-20220709092052-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +247.3 KB
Content
image-20220709093918-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +42.2 KB
Content
image-20220709093918-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +61.9 KB
Content