Skip to Content
Last modified by Mengting Qiu on 2024/04/02 16:44
From version 32.14
edited by Xiaoling
on 2022/06/07 11:40
Change comment: There is no comment for this version
To version 80.1
edited by Xiaoling
on 2022/07/09 09:20
Change comment: Uploaded new attachment "image-20220709092052-2.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LSE01-LoRaWAN Soil Moisture & EC Sensor User Manual
1 +NDDS75 NB-IoT Distance Detect Sensor User Manual
Content
... ... @@ -1,773 +1,731 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20220606151504-2.jpeg||height="554" width="554"]]
2 +[[image:image-20220709085040-1.png||height="542" width="524"]]
3 3  
4 4  
5 5  
6 -**Contents:**
7 7  
8 -{{toc/}}
9 9  
8 +**Table of Contents:**
10 10  
11 11  
12 12  
13 13  
14 14  
15 -= 1. Introduction =
16 16  
17 -== 1.1 ​What is LoRaWAN Soil Moisture & EC Sensor ==
18 18  
19 -(((
20 -The Dragino LSE01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil Moisture & EC Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity. It also has been calibrated in factory for Mineral soil type.
21 -)))
16 += 1.  Introduction =
22 22  
23 -(((
24 -It detects (% style="color:#4f81bd" %)**Soil Moisture**(%%), (% style="color:#4f81bd" %)**Soil Temperature**(%%) and (% style="color:#4f81bd" %)**Soil Conductivity**(%%), and uploads the value via wireless to LoRaWAN IoT Server.
25 -)))
18 +== 1.1 ​ What is NDDS75 Distance Detection Sensor ==
26 26  
27 27  (((
28 -The LoRa wireless technology used in LES01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
29 -)))
21 +
30 30  
31 31  (((
32 -LES01 is powered by (% style="color:#4f81bd" %)**4000mA or 8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 10 years.
24 +The Dragino NDDS75 is a (% style="color:blue" %)**NB-IoT Distance Detection Sensor**(%%) for Internet of Things solution. It is designed to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.
25 +\\The NDDS75 can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc. It detects the distance between the measured object and the sensor, and uploads the value via wireless to IoT Server via NB-IoT Network.
26 +\\NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
27 +\\NDDS75 supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP and CoAP** (%%)for different application requirement.
28 +\\NDDS75 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
29 +\\To use NDDS75, user needs to check if there is NB-IoT coverage in local area and with the bands NDDS75 supports. If the local operate support it, user needs to get a NB-IoT SIM card from local operator and install NDDS75 to get NB-IoT network connection.
33 33  )))
34 34  
35 -(((
36 -Each LES01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
32 +
37 37  )))
38 38  
39 -
40 40  [[image:1654503236291-817.png]]
41 41  
42 42  
43 -[[image:1654503265560-120.png]]
38 +[[image:1657327959271-447.png]]
44 44  
45 45  
46 46  
47 -== 1.2 ​Features ==
42 +== 1.2 ​ Features ==
48 48  
49 -* LoRaWAN 1.0.3 Class A
44 +
45 +* NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
50 50  * Ultra low power consumption
51 -* Monitor Soil Moisture
52 -* Monitor Soil Temperature
53 -* Monitor Soil Conductivity
54 -* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
47 +* Distance Detection by Ultrasonic technology
48 +* Flat object range 280mm - 7500mm
49 +* Accuracy: ±(1cm+S*0.3%) (S: Distance)
50 +* Cable Length: 25cm
55 55  * AT Commands to change parameters
56 56  * Uplink on periodically
57 57  * Downlink to change configure
58 58  * IP66 Waterproof Enclosure
59 -* 4000mAh or 8500mAh Battery for long term use
55 +* Micro SIM card slot for NB-IoT SIM
56 +* 8500mAh Battery for long term use
60 60  
61 -== 1.3 Specification ==
62 62  
63 -Measure Volume: Base on the centra pin of the probe, a cylinder with 7cm diameter and 10cm height.
64 64  
65 -[[image:image-20220606162220-5.png]]
60 +== 1.3  Specification ==
66 66  
67 67  
63 +(% style="color:#037691" %)**Common DC Characteristics:**
68 68  
69 -== ​1.4 Applications ==
65 +* Supply Voltage: 2.1v ~~ 3.6v
66 +* Operating Temperature: -40 ~~ 85°C
70 70  
71 -* Smart Agriculture
68 +(% style="color:#037691" %)**NB-IoT Spec:**
72 72  
73 -(% class="wikigeneratedid" id="H200B1.5FirmwareChangelog" %)
74 -​
70 +* - B1 @H-FDD: 2100MHz
71 +* - B3 @H-FDD: 1800MHz
72 +* - B8 @H-FDD: 900MHz
73 +* - B5 @H-FDD: 850MHz
74 +* - B20 @H-FDD: 800MHz
75 +* - B28 @H-FDD: 700MHz
75 75  
76 -== 1.5 Firmware Change log ==
77 77  
78 +(% style="color:#037691" %)**Battery:**
78 78  
79 -**LSE01 v1.0 :**  Release
80 +* Li/SOCI2 un-chargeable battery
81 +* Capacity: 8500mAh
82 +* Self Discharge: <1% / Year @ 25°C
83 +* Max continuously current: 130mA
84 +* Max boost current: 2A, 1 second
80 80  
81 81  
87 +(% style="color:#037691" %)**Power Consumption**
82 82  
83 -= 2. Configure LSE01 to connect to LoRaWAN network =
89 +* STOP Mode: 10uA @ 3.3v
90 +* Max transmit power: 350mA@3.3v
84 84  
85 -== 2.1 How it works ==
86 86  
87 -(((
88 -The LSE01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSE0150. It will automatically join the network via OTAA and start to send the sensor value
89 -)))
90 90  
91 -(((
92 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H3.200BUsingtheATCommands"]].
93 -)))
94 94  
95 +== ​1.4  Applications ==
95 95  
97 +* Smart Buildings & Home Automation
98 +* Logistics and Supply Chain Management
99 +* Smart Metering
100 +* Smart Agriculture
101 +* Smart Cities
102 +* Smart Factory
96 96  
97 -== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
104 +(% class="wikigeneratedid" id="H200B1.5FirmwareChangelog" %)
105 +​
98 98  
99 -Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.
100 100  
101 101  
102 -[[image:1654503992078-669.png]]
109 +== 1.5  Pin Definitions ==
103 103  
104 104  
105 -The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
112 +[[image:1657328609906-564.png]]
106 106  
107 107  
108 -**Step 1**: Create a device in TTN with the OTAA keys from LSE01.
109 109  
110 -Each LSE01 is shipped with a sticker with the default device EUI as below:
111 111  
112 -[[image:image-20220606163732-6.jpeg]]
117 += 2.  Use NSE01 to communicate with IoT Server =
113 113  
114 -You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
119 +== 2.1  How it works ==
115 115  
116 -**Add APP EUI in the application**
117 -
118 -
119 -[[image:1654504596150-405.png]]
120 -
121 -
122 -
123 -**Add APP KEY and DEV EUI**
124 -
125 -[[image:1654504683289-357.png]]
126 -
127 -
128 -
129 -**Step 2**: Power on LSE01
130 -
131 -
132 -Put a Jumper on JP2 to power on the device. ( The Jumper must be in FLASH position).
133 -
134 -[[image:image-20220606163915-7.png]]
135 -
136 -
137 -**Step 3:** The LSE01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
138 -
139 -[[image:1654504778294-788.png]]
140 -
141 -
142 -
143 -== 2.3 Uplink Payload ==
144 -
145 -(% class="wikigeneratedid" %)
146 -=== ===
147 -
148 -=== 2.3.1 MOD~=0(Default Mode) ===
149 -
150 -LSE01 will uplink payload via LoRaWAN with below payload format: 
151 -
152 152  (((
153 -Uplink payload includes in total 11 bytes.
122 +The NDDS75 is equipped with a NB-IoT module, the pre-loaded firmware in NDDS75 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by NDDS75.
154 154  )))
155 155  
156 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:500px" %)
157 -|(((
158 -**Size**
159 159  
160 -**(bytes)**
161 -)))|**2**|**2**|**2**|**2**|**2**|**1**
162 -|**Value**|[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(((
163 -Temperature
164 -
165 -(Reserve, Ignore now)
166 -)))|[[Soil Moisture>>||anchor="H2.3.4SoilMoisture"]]|[[Soil Temperature>>||anchor="H2.3.5SoilTemperature"]]|[[Soil Conductivity (EC)>>||anchor="H2.3.6SoilConductivity28EC29"]]|(((
167 -MOD & Digital Interrupt
168 -
169 -(Optional)
170 -)))
171 -
172 -
173 -
174 -=== 2.3.2 MOD~=1(Original value) ===
175 -
176 -This mode can get the original AD value of moisture and original conductivity (with temperature drift compensation).
177 -
178 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:500px" %)
179 -|(((
180 -**Size**
181 -
182 -**(bytes)**
183 -)))|**2**|**2**|**2**|**2**|**2**|**1**
184 -|**Value**|[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(((
185 -Temperature
186 -
187 -(Reserve, Ignore now)
188 -)))|[[Soil Moisture>>||anchor="H2.3.4SoilMoisture"]](raw)|[[Soil Temperature>>||anchor="H2.3.5SoilTemperature"]]|[[Soil Conductivity (EC)>>||anchor="H2.3.6SoilConductivity28EC29"]](raw)|(((
189 -MOD & Digital Interrupt
190 -
191 -(Optional)
192 -)))
193 -
194 -
195 -
196 -=== 2.3.3 Battery Info ===
197 -
198 198  (((
199 -Check the battery voltage for LSE01.
127 +The diagram below shows the working flow in default firmware of NDDS75:
200 200  )))
201 201  
202 202  (((
203 -Ex1: 0x0B45 = 2885mV
131 +
204 204  )))
205 205  
206 -(((
207 -Ex2: 0x0B49 = 2889mV
208 -)))
134 +[[image:1657328659945-416.png]]
209 209  
210 -
211 -
212 -=== 2.3.4 Soil Moisture ===
213 -
214 214  (((
215 -Get the moisture content of the soil. The value range of the register is 0-10000(Decimal), divide this value by 100 to get the percentage of moisture in the soil.
216 -)))
217 -
218 -(((
219 -For example, if the data you get from the register is __0x05 0xDC__, the moisture content in the soil is
220 -)))
221 -
222 -(((
223 223  
224 224  )))
225 225  
226 -(((
227 -(% style="color:#4f81bd" %)**05DC(H) = 1500(D) /100 = 15%.**
228 -)))
229 229  
141 +== 2.2 ​ Configure the NSE01 ==
230 230  
231 231  
232 -=== 2.3.5 Soil Temperature ===
144 +=== 2.2.1 Test Requirement ===
233 233  
234 -(((
235 - Get the temperature in the soil. The value range of the register is -4000 - +800(Decimal), divide this value by 100 to get the temperature in the soil. For example, if the data you get from the register is 0x09 0xEC, the temperature content in the soil is
236 -)))
237 237  
238 238  (((
239 -**Example**:
148 +To use NSE01 in your city, make sure meet below requirements:
240 240  )))
241 241  
242 -(((
243 -If payload is 0105H: ((0x0105 & 0x8000)>>15 === 0),temp = 0105(H)/100 = 2.61 °C
244 -)))
151 +* Your local operator has already distributed a NB-IoT Network there.
152 +* The local NB-IoT network used the band that NSE01 supports.
153 +* Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
245 245  
246 246  (((
247 -If payload is FF7EH: ((FF7E & 0x8000)>>15 ===1),temp = (FF7E(H)-FFFF(H))/100 = -1.29 °C
156 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NSE01 will use CoAP((% style="color:red" %)120.24.4.116:5683)(%%) or raw UDP((% style="color:red" %)120.24.4.116:5601)(%%) or MQTT((% style="color:red" %)120.24.4.116:1883)(%%)or TCP((% style="color:red" %)120.24.4.116:5600)(%%)protocol to send data to the test server
248 248  )))
249 249  
250 250  
160 +[[image:1657249419225-449.png]]
251 251  
252 -=== 2.3.6 Soil Conductivity (EC) ===
253 253  
254 -(((
255 -Obtain (% style="color:#4f81bd" %)**__soluble salt concentration__**(%%) in soil or (% style="color:#4f81bd" %)**__soluble ion concentration in liquid fertilizer__**(%%) or (% style="color:#4f81bd" %)**__planting medium__**(%%). The value range of the register is 0 - 20000(Decimal)( Can be greater than 20000).
256 -)))
257 257  
258 -(((
259 -For example, if the data you get from the register is 0x00 0xC8, the soil conductivity is 00C8(H) = 200(D) = 200 uS/cm.
260 -)))
164 +=== 2.2.2 Insert SIM card ===
261 261  
262 262  (((
263 -Generally, the EC value of irrigation water is less than 800uS / cm.
167 +Insert the NB-IoT Card get from your provider.
264 264  )))
265 265  
266 266  (((
267 -
171 +User need to take out the NB-IoT module and insert the SIM card like below:
268 268  )))
269 269  
270 -(((
271 -
272 -)))
273 273  
274 -=== 2.3.7 MOD ===
175 +[[image:1657249468462-536.png]]
275 275  
276 -Firmware version at least v2.1 supports changing mode.
277 277  
278 -For example, bytes[10]=90
279 279  
280 -mod=(bytes[10]>>7)&0x01=1.
179 +=== 2.2.3 Connect USB – TTL to NSE01 to configure it ===
281 281  
282 -
283 -**Downlink Command:**
284 -
285 -If payload = 0x0A00, workmode=0
286 -
287 -If** **payload =** **0x0A01, workmode=1
288 -
289 -
290 -
291 -=== 2.3.8 ​Decode payload in The Things Network ===
292 -
293 -While using TTN network, you can add the payload format to decode the payload.
294 -
295 -
296 -[[image:1654505570700-128.png]]
297 -
298 298  (((
299 -The payload decoder function for TTN is here:
300 -)))
301 -
302 302  (((
303 -LSE01 TTN Payload Decoder: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Payload_Decoder/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Payload_Decoder/]]
183 +User need to configure NSE01 via serial port to set the (% style="color:blue" %)**Server Address** / **Uplink Topic** (%%)to define where and how-to uplink packets. NSE01 support AT Commands, user can use a USB to TTL adapter to connect to NSE01 and use AT Commands to configure it, as below.
304 304  )))
185 +)))
305 305  
306 306  
188 +**Connection:**
307 307  
308 -== 2.4 Uplink Interval ==
190 + (% style="background-color:yellow" %)USB TTL GND <~-~-~-~-> GND
309 309  
310 -The LSE01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
192 + (% style="background-color:yellow" %)USB TTL TXD <~-~-~-~-> UART_RXD
311 311  
194 + (% style="background-color:yellow" %)USB TTL RXD <~-~-~-~-> UART_TXD
312 312  
313 313  
314 -== 2.5 Downlink Payload ==
197 +In the PC, use below serial tool settings:
315 315  
316 -By default, LSE50 prints the downlink payload to console port.
199 +* Baud:  (% style="color:green" %)**9600**
200 +* Data bits:** (% style="color:green" %)8(%%)**
201 +* Stop bits: (% style="color:green" %)**1**
202 +* Parity:  (% style="color:green" %)**None**
203 +* Flow Control: (% style="color:green" %)**None**
317 317  
318 -[[image:image-20220606165544-8.png]]
319 -
320 -
321 321  (((
322 -**Examples:**
206 +Make sure the switch is in FLASH position, then power on device by connecting the jumper on NSE01. NSE01 will output system info once power on as below, we can enter the (% style="color:green" %)**password: 12345678**(%%) to access AT Command input.
323 323  )))
324 324  
325 -(((
326 -
327 -)))
209 +[[image:image-20220708110657-3.png]]
328 328  
329 -* (((
330 -**Set TDC**
331 -)))
332 -
333 333  (((
334 -If the payload=0100003C, it means set the END Node’s TDC to 0x00003C=60(S), while type code is 01.
212 +(% style="color:red" %)Note: the valid AT Commands can be found at: (%%)[[http:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/]]
335 335  )))
336 336  
337 -(((
338 -Payload:    01 00 00 1E    TDC=30S
339 -)))
340 340  
341 -(((
342 -Payload:    01 00 00 3C    TDC=60S
343 -)))
344 344  
345 -(((
346 -
347 -)))
217 +=== 2.2.4 Use CoAP protocol to uplink data ===
348 348  
349 -* (((
350 -**Reset**
351 -)))
219 +(% style="color:red" %)Note: if you don't have CoAP server, you can refer this link to set up one: (%%)[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/>>http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
352 352  
353 -(((
354 -If payload = 0x04FF, it will reset the LSE01
355 -)))
356 356  
222 +**Use below commands:**
357 357  
358 -* **CFM**
224 +* (% style="color:blue" %)**AT+PRO=1**  (%%) ~/~/ Set to use CoAP protocol to uplink
225 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%)~/~/ to set CoAP server address and port
226 +* (% style="color:blue" %)**AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** (%%) ~/~/Set COAP resource path
359 359  
360 -Downlink Payload: 05000001, Set AT+CFM=1 or 05000000 , set AT+CFM=0
228 +For parameter description, please refer to AT command set
361 361  
230 +[[image:1657249793983-486.png]]
362 362  
363 363  
364 -== 2.6 ​Show Data in DataCake IoT Server ==
233 +After configure the server address and (% style="color:green" %)**reset the device**(%%) (via AT+ATZ ), NSE01 will start to uplink sensor values to CoAP server.
365 365  
366 -[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
235 +[[image:1657249831934-534.png]]
367 367  
368 368  
369 -**Step 1**: Be sure that your device is programmed and properly connected to the network at this time.
370 370  
371 -**Step 2**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
239 +=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
372 372  
241 +This feature is supported since firmware version v1.0.1
373 373  
374 -[[image:1654505857935-743.png]]
375 375  
244 +* (% style="color:blue" %)**AT+PRO=2   ** (%%) ~/~/ Set to use UDP protocol to uplink
245 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/ to set UDP server address and port
246 +* (% style="color:blue" %)**AT+CFM=1       ** (%%) ~/~/If the server does not respond, this command is unnecessary
376 376  
377 -[[image:1654505874829-548.png]]
248 +[[image:1657249864775-321.png]]
378 378  
379 -Step 3: Create an account or log in Datacake.
380 380  
381 -Step 4: Search the LSE01 and add DevEUI.
251 +[[image:1657249930215-289.png]]
382 382  
383 383  
384 -[[image:1654505905236-553.png]]
385 385  
255 +=== 2.2.6 Use MQTT protocol to uplink data ===
386 386  
387 -After added, the sensor data arrive TTN, it will also arrive and show in Mydevices.
257 +This feature is supported since firmware version v110
388 388  
389 -[[image:1654505925508-181.png]]
390 390  
260 +* (% style="color:blue" %)**AT+PRO=3   ** (%%) ~/~/Set to use MQTT protocol to uplink
261 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/Set MQTT server address and port
262 +* (% style="color:blue" %)**AT+CLIENT=CLIENT       ** (%%)~/~/Set up the CLIENT of MQTT
263 +* (% style="color:blue" %)**AT+UNAME=UNAME                               **(%%)~/~/Set the username of MQTT
264 +* (% style="color:blue" %)**AT+PWD=PWD                                        **(%%)~/~/Set the password of MQTT
265 +* (% style="color:blue" %)**AT+PUBTOPIC=NSE01_PUB                    **(%%)~/~/Set the sending topic of MQTT
266 +* (% style="color:blue" %)**AT+SUBTOPIC=NSE01_SUB          **(%%) ~/~/Set the subscription topic of MQTT
391 391  
268 +[[image:1657249978444-674.png]]
392 392  
393 -== 2.7 Frequency Plans ==
394 394  
395 -The LSE01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
271 +[[image:1657249990869-686.png]]
396 396  
397 397  
398 -=== 2.7.1 EU863-870 (EU868) ===
274 +(((
275 +MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
276 +)))
399 399  
400 -(% style="color:#037691" %)** Uplink:**
401 401  
402 -868.1 - SF7BW125 to SF12BW125
403 403  
404 -868.3 - SF7BW125 to SF12BW125 and SF7BW250
280 +=== 2.2.7 Use TCP protocol to uplink data ===
405 405  
406 -868.5 - SF7BW125 to SF12BW125
282 +This feature is supported since firmware version v110
407 407  
408 -867.1 - SF7BW125 to SF12BW125
409 409  
410 -867.3 - SF7BW125 to SF12BW125
285 +* (% style="color:blue" %)**AT+PRO=4   ** (%%) ~/~/ Set to use TCP protocol to uplink
286 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5600   **(%%) ~/~/ to set TCP server address and port
411 411  
412 -867.5 - SF7BW125 to SF12BW125
288 +[[image:1657250217799-140.png]]
413 413  
414 -867.7 - SF7BW125 to SF12BW125
415 415  
416 -867.9 - SF7BW125 to SF12BW125
291 +[[image:1657250255956-604.png]]
417 417  
418 -868.8 - FSK
419 419  
420 420  
421 -(% style="color:#037691" %)** Downlink:**
295 +=== 2.2.8 Change Update Interval ===
422 422  
423 -Uplink channels 1-9 (RX1)
297 +User can use below command to change the (% style="color:green" %)**uplink interval**.
424 424  
425 -869.525 - SF9BW125 (RX2 downlink only)
299 +* (% style="color:blue" %)**AT+TDC=600      ** (%%)~/~/ Set Update Interval to 600s
426 426  
301 +(((
302 +(% style="color:red" %)**NOTE:**
303 +)))
427 427  
305 +(((
306 +(% style="color:red" %)1. By default, the device will send an uplink message every 1 hour.
307 +)))
428 428  
429 -=== 2.7.2 US902-928(US915) ===
430 430  
431 -Used in USA, Canada and South America. Default use CHE=2
432 432  
433 -(% style="color:#037691" %)**Uplink:**
311 +== 2.3  Uplink Payload ==
434 434  
435 -903.9 - SF7BW125 to SF10BW125
313 +In this mode, uplink payload includes in total 18 bytes
436 436  
437 -904.1 - SF7BW125 to SF10BW125
315 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
316 +|=(% style="width: 60px;" %)(((
317 +**Size(bytes)**
318 +)))|=(% style="width: 50px;" %)**6**|=(% style="width: 25px;" %)2|=(% style="width: 25px;" %)**2**|=(% style="width: 70px;" %)**1**|=(% style="width: 60px;" %)**2**|=(% style="width: 80px;" %)**2**|=(% style="width: 90px;" %)**2**|=(% style="width: 50px;" %)**1**
319 +|(% style="width:97px" %)**Value**|(% style="width:83px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:41px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:123px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:108px" %)[[Soil Moisture>>||anchor="H2.4.5A0SoilMoisture"]]|(% style="width:133px" %)[[Soil Temperature>>||anchor="H2.4.6A0SoilTemperature"]]|(% style="width:159px" %)[[Soil Conductivity(EC)>>||anchor="H2.4.7A0SoilConductivity28EC29"]]|(% style="width:80px" %)[[Interrupt>>||anchor="H2.4.8A0DigitalInterrupt"]]
438 438  
439 -904.3 - SF7BW125 to SF10BW125
321 +(((
322 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NSE01 uplink data.
323 +)))
440 440  
441 -904.5 - SF7BW125 to SF10BW125
442 442  
443 -904.7 - SF7BW125 to SF10BW125
326 +[[image:image-20220708111918-4.png]]
444 444  
445 -904.9 - SF7BW125 to SF10BW125
446 446  
447 -905.1 - SF7BW125 to SF10BW125
329 +The payload is ASCII string, representative same HEX:
448 448  
449 -905.3 - SF7BW125 to SF10BW125
331 +0x72403155615900640c7817075e0a8c02f900 where:
450 450  
333 +* Device ID: 0x 724031556159 = 724031556159
334 +* Version: 0x0064=100=1.0.0
451 451  
452 -(% style="color:#037691" %)**Downlink:**
336 +* BAT: 0x0c78 = 3192 mV = 3.192V
337 +* Singal: 0x17 = 23
338 +* Soil Moisture: 0x075e= 1886 = 18.86  %
339 +* Soil Temperature:0x0a8c =2700=27 °C
340 +* Soil Conductivity(EC) = 0x02f9 =761 uS /cm
341 +* Interrupt: 0x00 = 0
453 453  
454 -923.3 - SF7BW500 to SF12BW500
343 +== 2.4  Payload Explanation and Sensor Interface ==
455 455  
456 -923.9 - SF7BW500 to SF12BW500
457 457  
458 -924.5 - SF7BW500 to SF12BW500
346 +=== 2.4.1  Device ID ===
459 459  
460 -925.1 - SF7BW500 to SF12BW500
348 +(((
349 +By default, the Device ID equal to the last 6 bytes of IMEI.
350 +)))
461 461  
462 -925.7 - SF7BW500 to SF12BW500
352 +(((
353 +User can use (% style="color:blue" %)**AT+DEUI**(%%) to set Device ID
354 +)))
463 463  
464 -926.3 - SF7BW500 to SF12BW500
356 +(((
357 +**Example:**
358 +)))
465 465  
466 -926.9 - SF7BW500 to SF12BW500
360 +(((
361 +AT+DEUI=A84041F15612
362 +)))
467 467  
468 -927.5 - SF7BW500 to SF12BW500
364 +(((
365 +The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
366 +)))
469 469  
470 -923.3 - SF12BW500(RX2 downlink only)
471 471  
472 472  
370 +=== 2.4.2  Version Info ===
473 473  
474 -=== 2.7.3 CN470-510 (CN470) ===
372 +(((
373 +Specify the software version: 0x64=100, means firmware version 1.00.
374 +)))
475 475  
476 -Used in China, Default use CHE=1
376 +(((
377 +For example: 0x00 64 : this device is NSE01 with firmware version 1.0.0.
378 +)))
477 477  
478 -(% style="color:#037691" %)**Uplink:**
479 479  
480 -486.3 - SF7BW125 to SF12BW125
481 481  
482 -486.5 - SF7BW125 to SF12BW125
382 +=== 2.4.3  Battery Info ===
483 483  
484 -486.7 - SF7BW125 to SF12BW125
384 +(((
385 +Check the battery voltage for LSE01.
386 +)))
485 485  
486 -486.9 - SF7BW125 to SF12BW125
388 +(((
389 +Ex1: 0x0B45 = 2885mV
390 +)))
487 487  
488 -487.1 - SF7BW125 to SF12BW125
392 +(((
393 +Ex2: 0x0B49 = 2889mV
394 +)))
489 489  
490 -487.3 - SF7BW125 to SF12BW125
491 491  
492 -487.5 - SF7BW125 to SF12BW125
493 493  
494 -487.7 - SF7BW125 to SF12BW125
398 +=== 2.4.4  Signal Strength ===
495 495  
400 +(((
401 +NB-IoT Network signal Strength.
402 +)))
496 496  
497 -(% style="color:#037691" %)**Downlink:**
404 +(((
405 +**Ex1: 0x1d = 29**
406 +)))
498 498  
499 -506.7 - SF7BW125 to SF12BW125
408 +(((
409 +(% style="color:blue" %)**0**(%%)  -113dBm or less
410 +)))
500 500  
501 -506.9 - SF7BW125 to SF12BW125
412 +(((
413 +(% style="color:blue" %)**1**(%%)  -111dBm
414 +)))
502 502  
503 -507.1 - SF7BW125 to SF12BW125
416 +(((
417 +(% style="color:blue" %)**2...30**(%%) -109dBm... -53dBm
418 +)))
504 504  
505 -507.3 - SF7BW125 to SF12BW125
420 +(((
421 +(% style="color:blue" %)**31**  (%%) -51dBm or greater
422 +)))
506 506  
507 -507.5 - SF7BW125 to SF12BW125
424 +(((
425 +(% style="color:blue" %)**99**   (%%) Not known or not detectable
426 +)))
508 508  
509 -507.7 - SF7BW125 to SF12BW125
510 510  
511 -507.9 - SF7BW125 to SF12BW125
512 512  
513 -508.1 - SF7BW125 to SF12BW125
430 +=== 2.4.5  Soil Moisture ===
514 514  
515 -505.3 - SF12BW125 (RX2 downlink only)
432 +(((
433 +(((
434 +Get the moisture content of the soil. The value range of the register is 0-10000(Decimal), divide this value by 100 to get the percentage of moisture in the soil.
435 +)))
436 +)))
516 516  
438 +(((
439 +(((
440 +For example, if the data you get from the register is **__0x05 0xDC__**, the moisture content in the soil is
441 +)))
442 +)))
517 517  
444 +(((
445 +
446 +)))
518 518  
519 -=== 2.7.4 AU915-928(AU915) ===
448 +(((
449 +(% style="color:#4f81bd" %)**05DC(H) = 1500(D) /100 = 15%.**
450 +)))
520 520  
521 -Default use CHE=2
522 522  
523 -(% style="color:#037691" %)**Uplink:**
524 524  
525 -916.8 - SF7BW125 to SF12BW125
454 +=== 2.4.6  Soil Temperature ===
526 526  
527 -917.0 - SF7BW125 to SF12BW125
456 +(((
457 +Get the temperature in the soil. The value range of the register is -4000 - +800(Decimal), divide this value by 100 to get the temperature in the soil. For example, if the data you get from the register is __**0x09 0xEC**__, the temperature content in the soil is
458 +)))
528 528  
529 -917.2 - SF7BW125 to SF12BW125
460 +(((
461 +**Example**:
462 +)))
530 530  
531 -917.4 - SF7BW125 to SF12BW125
464 +(((
465 +If payload is 0105H: ((0x0105 & 0x8000)>>15 === 0),temp = 0105(H)/100 = 2.61 °C
466 +)))
532 532  
533 -917.6 - SF7BW125 to SF12BW125
468 +(((
469 +If payload is FF7EH: ((FF7E & 0x8000)>>15 ===1),temp = (FF7E(H)-FFFF(H))/100 = -1.29 °C
470 +)))
534 534  
535 -917.8 - SF7BW125 to SF12BW125
536 536  
537 -918.0 - SF7BW125 to SF12BW125
538 538  
539 -918.2 - SF7BW125 to SF12BW125
474 +=== 2.4.7  Soil Conductivity (EC) ===
540 540  
476 +(((
477 +Obtain (% style="color:#4f81bd" %)**__soluble salt concentration__**(%%) in soil or (% style="color:#4f81bd" %)**__soluble ion concentration in liquid fertilizer__**(%%) or (% style="color:#4f81bd" %)**__planting medium__**(%%). The value range of the register is 0 - 20000(Decimal)( Can be greater than 20000).
478 +)))
541 541  
542 -(% style="color:#037691" %)**Downlink:**
480 +(((
481 +For example, if the data you get from the register is __**0x00 0xC8**__, the soil conductivity is 00C8(H) = 200(D) = 200 uS/cm.
482 +)))
543 543  
544 -923.3 - SF7BW500 to SF12BW500
484 +(((
485 +Generally, the EC value of irrigation water is less than 800uS / cm.
486 +)))
545 545  
546 -923.9 - SF7BW500 to SF12BW500
488 +(((
489 +
490 +)))
547 547  
548 -924.5 - SF7BW500 to SF12BW500
492 +(((
493 +
494 +)))
549 549  
550 -925.1 - SF7BW500 to SF12BW500
496 +=== 2.4.8  Digital Interrupt ===
551 551  
552 -925.7 - SF7BW500 to SF12BW500
498 +(((
499 +Digital Interrupt refers to pin (% style="color:blue" %)**GPIO_EXTI**(%%), and there are different trigger methods. When there is a trigger, the NSE01 will send a packet to the server.
500 +)))
553 553  
554 -926.3 - SF7BW500 to SF12BW500
502 +(((
503 +The command is:
504 +)))
555 555  
556 -926.9 - SF7BW500 to SF12BW500
506 +(((
507 +(% style="color:blue" %)**AT+INTMOD=3 **(%%) ~/~/(more info about INMOD please refer [[**AT Command Manual**>>url:https://www.dragino.com/downloads/downloads/NB-IoT/NBSN95/DRAGINO_NBSN95-NB_AT%20Commands_v1.1.0.pdf]])**.**
508 +)))
557 557  
558 -927.5 - SF7BW500 to SF12BW500
559 559  
560 -923.3 - SF12BW500(RX2 downlink only)
511 +(((
512 +The lower four bits of this data field shows if this packet is generated by interrupt or not. Click here for the hardware and software set up.
513 +)))
561 561  
562 562  
516 +(((
517 +Example:
518 +)))
563 563  
564 -=== 2.7.5 AS920-923 & AS923-925 (AS923) ===
520 +(((
521 +0x(00): Normal uplink packet.
522 +)))
565 565  
566 -(% style="color:#037691" %)**Default Uplink channel:**
524 +(((
525 +0x(01): Interrupt Uplink Packet.
526 +)))
567 567  
568 -923.2 - SF7BW125 to SF10BW125
569 569  
570 -923.4 - SF7BW125 to SF10BW125
571 571  
530 +=== 2.4.9  ​+5V Output ===
572 572  
573 -(% style="color:#037691" %)**Additional Uplink Channel**:
532 +(((
533 +NSE01 will enable +5V output before all sampling and disable the +5v after all sampling. 
534 +)))
574 574  
575 -(OTAA mode, channel added by JoinAccept message)
576 576  
577 -(% style="color:#037691" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
537 +(((
538 +The 5V output time can be controlled by AT Command.
539 +)))
578 578  
579 -922.2 - SF7BW125 to SF10BW125
541 +(((
542 +(% style="color:blue" %)**AT+5VT=1000**
543 +)))
580 580  
581 -922.4 - SF7BW125 to SF10BW125
545 +(((
546 +Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
547 +)))
582 582  
583 -922.6 - SF7BW125 to SF10BW125
584 584  
585 -922.8 - SF7BW125 to SF10BW125
586 586  
587 -923.0 - SF7BW125 to SF10BW125
551 +== 2.5  Downlink Payload ==
588 588  
589 -922.0 - SF7BW125 to SF10BW125
553 +By default, NSE01 prints the downlink payload to console port.
590 590  
555 +[[image:image-20220708133731-5.png]]
591 591  
592 -(% style="color:#037691" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
593 593  
594 -923.6 - SF7BW125 to SF10BW125
558 +(((
559 +(% style="color:blue" %)**Examples:**
560 +)))
595 595  
596 -923.8 - SF7BW125 to SF10BW125
562 +(((
563 +
564 +)))
597 597  
598 -924.0 - SF7BW125 to SF10BW125
566 +* (((
567 +(% style="color:blue" %)**Set TDC**
568 +)))
599 599  
600 -924.2 - SF7BW125 to SF10BW125
570 +(((
571 +If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
572 +)))
601 601  
602 -924.4 - SF7BW125 to SF10BW125
574 +(((
575 +Payload:    01 00 00 1E    TDC=30S
576 +)))
603 603  
604 -924.6 - SF7BW125 to SF10BW125
578 +(((
579 +Payload:    01 00 00 3C    TDC=60S
580 +)))
605 605  
582 +(((
583 +
584 +)))
606 606  
607 -(% style="color:#037691" %)** Downlink:**
586 +* (((
587 +(% style="color:blue" %)**Reset**
588 +)))
608 608  
609 -Uplink channels 1-8 (RX1)
590 +(((
591 +If payload = 0x04FF, it will reset the NSE01
592 +)))
610 610  
611 -923.2 - SF10BW125 (RX2)
612 612  
595 +* (% style="color:blue" %)**INTMOD**
613 613  
597 +(((
598 +Downlink Payload: 06000003, Set AT+INTMOD=3
599 +)))
614 614  
615 -=== 2.7.6 KR920-923 (KR920) ===
616 616  
617 -Default channel:
618 618  
619 -922.1 - SF7BW125 to SF12BW125
603 +== 2.6  ​LED Indicator ==
620 620  
621 -922.3 - SF7BW125 to SF12BW125
605 +(((
606 +The NSE01 has an internal LED which is to show the status of different state.
622 622  
623 -922.5 - SF7BW125 to SF12BW125
624 624  
609 +* When power on, NSE01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
610 +* Then the LED will be on for 1 second means device is boot normally.
611 +* After NSE01 join NB-IoT network. The LED will be ON for 3 seconds.
612 +* For each uplink probe, LED will be on for 500ms.
613 +)))
625 625  
626 -(% style="color:#037691" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
627 627  
628 -922.1 - SF7BW125 to SF12BW125
629 629  
630 -922.3 - SF7BW125 to SF12BW125
631 631  
632 -922.5 - SF7BW125 to SF12BW125
618 +== 2.7  Installation in Soil ==
633 633  
634 -922.7 - SF7BW125 to SF12BW125
620 +__**Measurement the soil surface**__
635 635  
636 -922.9 - SF7BW125 to SF12BW125
622 +(((
623 +Choose the proper measuring position. Avoid the probe to touch rocks or hard things. Split the surface soil according to the measured deep. Keep the measured as original density. Vertical insert the probe into the soil to be measured. Make sure not shake when inserting. [[https:~~/~~/img.alicdn.com/imgextra/i3/2005165265/O1CN010rj9Oh1olPsQxrdUK_!!2005165265.jpg>>url:https://img.alicdn.com/imgextra/i3/2005165265/O1CN010rj9Oh1olPsQxrdUK_!!2005165265.jpg]]
624 +)))
637 637  
638 -923.1 - SF7BW125 to SF12BW125
626 +[[image:1657259653666-883.png]] ​
639 639  
640 -923.3 - SF7BW125 to SF12BW125
641 641  
629 +(((
630 +
642 642  
643 -(% style="color:#037691" %)**Downlink:**
632 +(((
633 +Dig a hole with diameter > 20CM.
634 +)))
644 644  
645 -Uplink channels 1-7(RX1)
636 +(((
637 +Horizontal insert the probe to the soil and fill the hole for long term measurement.
638 +)))
639 +)))
646 646  
647 -921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
641 +[[image:1654506665940-119.png]]
648 648  
643 +(((
644 +
645 +)))
649 649  
650 650  
651 -=== 2.7.7 IN865-867 (IN865) ===
648 +== 2.8  ​Firmware Change Log ==
652 652  
653 -(% style="color:#037691" %)** Uplink:**
654 654  
655 -865.0625 - SF7BW125 to SF12BW125
651 +Download URL & Firmware Change log
656 656  
657 -865.4025 - SF7BW125 to SF12BW125
653 +[[www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/Firmware/]]
658 658  
659 -865.9850 - SF7BW125 to SF12BW125
660 660  
656 +Upgrade Instruction: [[Upgrade_Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
661 661  
662 -(% style="color:#037691" %) **Downlink:**
663 663  
664 -Uplink channels 1-3 (RX1)
665 665  
666 -866.550 - SF10BW125 (RX2)
660 +== 2.9  ​Battery Analysis ==
667 667  
662 +=== 2.9.1  ​Battery Type ===
668 668  
669 669  
670 -
671 -== 2.8 LED Indicator ==
672 -
673 -The LSE01 has an internal LED which is to show the status of different state.
674 -
675 -* Blink once when device power on.
676 -* Solid ON for 5 seconds once device successful Join the network.
677 -* Blink once when device transmit a packet.
678 -
679 -
680 -
681 -== 2.9 Installation in Soil ==
682 -
683 -**Measurement the soil surface**
684 -
685 -
686 -[[image:1654506634463-199.png]] ​
687 -
688 688  (((
689 -(((
690 -Choose the proper measuring position. Avoid the probe to touch rocks or hard things. Split the surface soil according to the measured deep. Keep the measured as original density. Vertical insert the probe into the soil to be measured. Make sure not shake when inserting.
666 +The NSE01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
691 691  )))
692 -)))
693 693  
694 694  
695 -[[image:1654506665940-119.png]]
696 -
697 697  (((
698 -Dig a hole with diameter > 20CM.
671 +The battery is designed to last for several years depends on the actually use environment and update interval. 
699 699  )))
700 700  
701 -(((
702 -Horizontal insert the probe to the soil and fill the hole for long term measurement.
703 -)))
704 704  
705 -
706 -== 2.10 ​Firmware Change Log ==
707 -
708 708  (((
709 -**Firmware download link:**
676 +The battery related documents as below:
710 710  )))
711 711  
712 -(((
713 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
714 -)))
679 +* [[Battery Dimension>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
680 +* [[Lithium-Thionyl Chloride Battery datasheet>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
681 +* [[Lithium-ion Battery-Capacitor datasheet>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
715 715  
716 716  (((
717 -
684 +[[image:image-20220708140453-6.png]]
718 718  )))
719 719  
720 -(((
721 -**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]
722 -)))
723 723  
724 -(((
725 -
726 -)))
727 727  
728 -(((
729 -**V1.0.**
730 -)))
689 +=== 2.9.2  Power consumption Analyze ===
731 731  
732 732  (((
733 -Release
692 +Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
734 734  )))
735 735  
736 736  
737 -== 2.11 ​Battery Analysis ==
738 -
739 -=== 2.11.1 ​Battery Type ===
740 -
741 741  (((
742 -The LSE01 battery is a combination of a 4000mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
697 +Instruction to use as below:
743 743  )))
744 744  
745 745  (((
746 -The battery is designed to last for more than 5 years for the LSN50.
701 +(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
747 747  )))
748 748  
704 +
749 749  (((
750 -(((
751 -The battery-related documents are as below:
706 +(% style="color:blue" %)**Step 2: **(%%) Open it and choose
752 752  )))
753 -)))
754 754  
755 755  * (((
756 -[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
710 +Product Model
757 757  )))
758 758  * (((
759 -[[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
713 +Uplink Interval
760 760  )))
761 761  * (((
762 -[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
716 +Working Mode
763 763  )))
764 764  
765 - [[image:image-20220606171726-9.png]]
719 +(((
720 +And the Life expectation in difference case will be shown on the right.
721 +)))
766 766  
723 +[[image:image-20220708141352-7.jpeg]]
767 767  
768 768  
769 -=== 2.11.2 ​Battery Note ===
770 770  
727 +=== 2.9.3  ​Battery Note ===
728 +
771 771  (((
772 772  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
773 773  )))
... ... @@ -774,303 +774,176 @@
774 774  
775 775  
776 776  
777 -=== 2.11.3 Replace the battery ===
735 +=== 2.9.4  Replace the battery ===
778 778  
779 779  (((
780 -If Battery is lower than 2.7v, user should replace the battery of LSE01.
738 +The default battery pack of NSE01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
781 781  )))
782 782  
741 +
742 +
743 += 3. ​ Access NB-IoT Module =
744 +
783 783  (((
784 -You can change the battery in the LSE01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
746 +Users can directly access the AT command set of the NB-IoT module.
785 785  )))
786 786  
787 787  (((
788 -The default battery pack of LSE01 includes a ER18505 plus super capacitor. If user can’t find this pack locally, they can find ER18505 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
750 +The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
789 789  )))
790 790  
753 +[[image:1657261278785-153.png]]
791 791  
792 792  
793 -= 3. ​Using the AT Commands =
794 794  
795 -== 3.1 Access AT Commands ==
757 += 4.  Using the AT Commands =
796 796  
759 +== 4.1  Access AT Commands ==
797 797  
798 -LSE01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSE01 for using AT command, as below.
761 +See this link for detail: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/]]
799 799  
800 -[[image:1654501986557-872.png||height="391" width="800"]]
801 801  
764 +AT+<CMD>?  : Help on <CMD>
802 802  
803 -Or if you have below board, use below connection:
766 +AT+<CMD>         : Run <CMD>
804 804  
768 +AT+<CMD>=<value> : Set the value
805 805  
806 -[[image:1654502005655-729.png||height="503" width="801"]]
770 +AT+<CMD>=?  : Get the value
807 807  
808 808  
809 -
810 -In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSE01. LSE01 will output system info once power on as below:
811 -
812 -
813 - [[image:1654502050864-459.png||height="564" width="806"]]
814 -
815 -
816 -Below are the available commands, a more detailed AT Command manual can be found at [[AT Command Manual>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/]]: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/]]
817 -
818 -
819 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>? **(%%) : Help on <CMD>
820 -
821 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD> **(%%) : Run <CMD>
822 -
823 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>=<value>**(%%) : Set the value
824 -
825 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>=?**(%%)  : Get the value
826 -
827 -
828 828  (% style="color:#037691" %)**General Commands**(%%)      
829 829  
830 -(% style="background-color:#dcdcdc" %)**AT**(%%)  : Attention       
775 +AT  : Attention       
831 831  
832 -(% style="background-color:#dcdcdc" %)**AT?**(%%)  : Short Help     
777 +AT?  : Short Help     
833 833  
834 -(% style="background-color:#dcdcdc" %)**ATZ**(%%)  : MCU Reset    
779 +ATZ  : MCU Reset    
835 835  
836 -(% style="background-color:#dcdcdc" %)**AT+TDC**(%%)  : Application Data Transmission Interval 
781 +AT+TDC  : Application Data Transmission Interval
837 837  
783 +AT+CFG  : Print all configurations
838 838  
839 -(% style="color:#037691" %)**Keys, IDs and EUIs management**
785 +AT+CFGMOD           : Working mode selection
840 840  
841 -(% style="background-color:#dcdcdc" %)**AT+APPEUI**(%%)              : Application EUI      
787 +AT+INTMOD            : Set the trigger interrupt mode
842 842  
843 -(% style="background-color:#dcdcdc" %)**AT+APPKEY**(%%)              : Application Key     
789 +AT+5VT  : Set extend the time of 5V power  
844 844  
845 -(% style="background-color:#dcdcdc" %)**AT+APPSKEY**(%%)            : Application Session Key
791 +AT+PRO  : Choose agreement
846 846  
847 -(% style="background-color:#dcdcdc" %)**AT+DADDR**(%%)              : Device Address     
793 +AT+WEIGRE  : Get weight or set weight to 0
848 848  
849 -(% style="background-color:#dcdcdc" %)**AT+DEUI**(%%)                   : Device EUI     
795 +AT+WEIGAP  : Get or Set the GapValue of weight
850 850  
851 -(% style="background-color:#dcdcdc" %)**AT+NWKID**(%%)               : Network ID (You can enter this command change only after successful network connection) 
797 +AT+RXDL  : Extend the sending and receiving time
852 852  
853 -(% style="background-color:#dcdcdc" %)**AT+NWKSKEY**(%%)          : Network Session Key Joining and sending date on LoRa network  
799 +AT+CNTFAC  : Get or set counting parameters
854 854  
855 -(% style="background-color:#dcdcdc" %)**AT+CFM**(%%)  : Confirm Mode       
801 +AT+SERVADDR  : Server Address
856 856  
857 -(% style="background-color:#dcdcdc" %)**AT+CFS**(%%)                     : Confirm Status       
858 858  
859 -(% style="background-color:#dcdcdc" %)**AT+JOIN**(%%)  : Join LoRa? Network       
804 +(% style="color:#037691" %)**COAP Management**      
860 860  
861 -(% style="background-color:#dcdcdc" %)**AT+NJM**(%%)  : LoRa? Network Join Mode    
806 +AT+URI            : Resource parameters
862 862  
863 -(% style="background-color:#dcdcdc" %)**AT+NJS**(%%)                     : LoRa? Network Join Status    
864 864  
865 -(% style="background-color:#dcdcdc" %)**AT+RECV**(%%)                  : Print Last Received Data in Raw Format
809 +(% style="color:#037691" %)**UDP Management**
866 866  
867 -(% style="background-color:#dcdcdc" %)**AT+RECVB**(%%)                : Print Last Received Data in Binary Format      
811 +AT+CFM          : Upload confirmation mode (only valid for UDP)
868 868  
869 -(% style="background-color:#dcdcdc" %)**AT+SEND**(%%)                  : Send Text Data      
870 870  
871 -(% style="background-color:#dcdcdc" %)**AT+SENB**(%%)                  : Send Hexadecimal Data
814 +(% style="color:#037691" %)**MQTT Management**
872 872  
816 +AT+CLIENT               : Get or Set MQTT client
873 873  
874 -(% style="color:#037691" %)**LoRa Network Management**
818 +AT+UNAME  : Get or Set MQTT Username
875 875  
876 -(% style="background-color:#dcdcdc" %)**AT+ADR**(%%)          : Adaptive Rate
820 +AT+PWD                  : Get or Set MQTT password
877 877  
878 -(% style="background-color:#dcdcdc" %)**AT+CLASS**(%%)  : LoRa Class(Currently only support class A
822 +AT+PUBTOPIC  : Get or Set MQTT publish topic
879 879  
880 -(% style="background-color:#dcdcdc" %)**AT+DCS**(%%)  : Duty Cycle Setting 
824 +AT+SUBTOPIC  : Get or Set MQTT subscription topic
881 881  
882 -(% style="background-color:#dcdcdc" %)**AT+DR**(%%)  : Data Rate (Can Only be Modified after ADR=0)     
883 883  
884 -(% style="background-color:#dcdcdc" %)**AT+FCD**(%%)  : Frame Counter Downlink       
827 +(% style="color:#037691" %)**Information**          
885 885  
886 -(% style="background-color:#dcdcdc" %)**AT+FCU**(%%)  : Frame Counter Uplink   
829 +AT+FDR  : Factory Data Reset
887 887  
888 -(% style="background-color:#dcdcdc" %)**AT+JN1DL**(%%)  : Join Accept Delay1
831 +AT+PWORD  : Serial Access Password
889 889  
890 -(% style="background-color:#dcdcdc" %)**AT+JN2DL**(%%)  : Join Accept Delay2
891 891  
892 -(% style="background-color:#dcdcdc" %)**AT+PNM**(%%)  : Public Network Mode   
893 893  
894 -(% style="background-color:#dcdcdc" %)**AT+RX1DL**(%%)  : Receive Delay1      
835 += ​5.  FAQ =
895 895  
896 -(% style="background-color:#dcdcdc" %)**AT+RX2DL**(%%)  : Receive Delay2      
837 +== 5.1 ​ How to Upgrade Firmware ==
897 897  
898 -(% style="background-color:#dcdcdc" %)**AT+RX2DR**(%%)  : Rx2 Window Data Rate 
899 899  
900 -(% style="background-color:#dcdcdc" %)**AT+RX2FQ**(%%)  : Rx2 Window Frequency
901 -
902 -(% style="background-color:#dcdcdc" %)**AT+TXP**(%%)  : Transmit Power
903 -
904 -(% style="background-color:#dcdcdc" %)**AT+ MOD**(%%)  : Set work mode
905 -
906 -
907 -(% style="color:#037691" %)**Information** 
908 -
909 -(% style="background-color:#dcdcdc" %)**AT+RSSI**(%%)           : RSSI of the Last Received Packet   
910 -
911 -(% style="background-color:#dcdcdc" %)**AT+SNR**(%%)           : SNR of the Last Received Packet   
912 -
913 -(% style="background-color:#dcdcdc" %)**AT+VER**(%%)           : Image Version and Frequency Band       
914 -
915 -(% style="background-color:#dcdcdc" %)**AT+FDR**(%%)           : Factory Data Reset
916 -
917 -(% style="background-color:#dcdcdc" %)**AT+PORT**(%%)  : Application Port    
918 -
919 -(% style="background-color:#dcdcdc" %)**AT+CHS**(%%)  : Get or Set Frequency (Unit: Hz) for Single Channel Mode
920 -
921 - (% style="background-color:#dcdcdc" %)**AT+CHE**(%%)  : Get or Set eight channels mode, Only for US915, AU915, CN470
922 -
923 -
924 -= ​4. FAQ =
925 -
926 -== 4.1 ​How to change the LoRa Frequency Bands/Region? ==
927 -
928 928  (((
929 -You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
930 -When downloading the images, choose the required image file for download. ​
841 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
931 931  )))
932 932  
933 933  (((
934 -
845 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
935 935  )))
936 936  
937 937  (((
938 -How to set up LSE01 to work in 8 channel mode By default, the frequency bands US915, AU915, CN470 work in 72 frequencies. Many gateways are 8 channel gateways, and in this case, the OTAA join time and uplink schedule is long and unpredictable while the end node is hopping in 72 frequencies.
849 +(% style="color:red" %)Notice, NSE01 and LSE01 share the same mother board. They use the same connection and method to update.
939 939  )))
940 940  
941 -(((
942 -
943 -)))
944 944  
945 -(((
946 -You can configure the end node to work in 8 channel mode by using the AT+CHE command. The 500kHz channels are always included for OTAA.
947 -)))
948 948  
949 -(((
950 -
951 -)))
854 +== 5.2  Can I calibrate NSE01 to different soil types? ==
952 952  
953 953  (((
954 -For example, in **US915** band, the frequency table is as below. By default, the end node will use all channels (0~~71) for OTAA Join process. After the OTAA Join, the end node will use these all channels (0~~71) to send uplink packets.
857 +NSE01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
955 955  )))
956 956  
957 -[[image:image-20220606154726-3.png]]
958 958  
861 += 6.  Trouble Shooting =
959 959  
960 -When you use the TTN network, the US915 frequency bands use are:
863 +== 6.1  ​Connection problem when uploading firmware ==
961 961  
962 -* 903.9 - SF7BW125 to SF10BW125
963 -* 904.1 - SF7BW125 to SF10BW125
964 -* 904.3 - SF7BW125 to SF10BW125
965 -* 904.5 - SF7BW125 to SF10BW125
966 -* 904.7 - SF7BW125 to SF10BW125
967 -* 904.9 - SF7BW125 to SF10BW125
968 -* 905.1 - SF7BW125 to SF10BW125
969 -* 905.3 - SF7BW125 to SF10BW125
970 -* 904.6 - SF8BW500
971 971  
972 972  (((
973 -Because the end node is now hopping in 72 frequency, it makes it difficult for the devices to Join the TTN network and uplink data. To solve this issue, you can access the device via the AT commands and run:
867 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
974 974  )))
975 975  
976 -(% class="box infomessage" %)
870 +(% class="wikigeneratedid" %)
977 977  (((
978 -**AT+CHE=2**
979 -)))
980 -
981 -(% class="box infomessage" %)
982 -(((
983 -**ATZ**
984 -)))
985 -
986 -(((
987 -to set the end node to work in 8 channel mode. The device will work in Channel 8-15 & 64-71 for OTAA, and channel 8-15 for Uplink.
988 -)))
989 -
990 -(((
991 991  
992 992  )))
993 993  
994 -(((
995 -The **AU915** band is similar. Below are the AU915 Uplink Channels.
996 -)))
997 997  
998 -[[image:image-20220606154825-4.png]]
876 +== 6.2  AT Command input doesn't work ==
999 999  
1000 -
1001 -
1002 -= 5. Trouble Shooting =
1003 -
1004 -== 5.1 ​Why I can’t join TTN in US915 / AU915 bands? ==
1005 -
1006 -It is due to channel mapping. Please see the [[Eight Channel Mode>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]] section above for details.
1007 -
1008 -
1009 -== 5.2 AT Command input doesn’t work ==
1010 -
1011 1011  (((
1012 -In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1013 -)))
879 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1014 1014  
1015 -
1016 -== 5.3 Device rejoin in at the second uplink packet ==
1017 -
1018 -(% style="color:#4f81bd" %)**Issue describe as below:**
1019 -
1020 -[[image:1654500909990-784.png]]
1021 -
1022 -
1023 -(% style="color:#4f81bd" %)**Cause for this issue:**
1024 -
1025 -(((
1026 -The fuse on LSE01 is not large enough, some of the soil probe require large current up to 5v 800mA, in a short pulse. When this happen, it cause the device reboot so user see rejoin.
881 +
1027 1027  )))
1028 1028  
1029 1029  
1030 -(% style="color:#4f81bd" %)**Solution: **
885 += 7. ​ Order Info =
1031 1031  
1032 -All new shipped LSE01 after 2020-May-30 will have this to fix. For the customer who see this issue, please bypass the fuse as below:
1033 1033  
1034 -[[image:1654500929571-736.png||height="458" width="832"]]
888 +Part Number**:** (% style="color:#4f81bd" %)**NSE01**
1035 1035  
1036 1036  
1037 -= 6. ​Order Info =
1038 -
1039 -
1040 -Part Number**:** (% style="color:#4f81bd" %)**LSE01-XX-YY**
1041 -
1042 -
1043 -(% style="color:#4f81bd" %)**XX**(%%)**:** The default frequency band
1044 -
1045 -* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1046 -* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1047 -* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
1048 -* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1049 -* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1050 -* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1051 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1052 -* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1053 -
1054 -(% style="color:#4f81bd" %)**YY**(%%)**: **Battery Option
1055 -
1056 -* (% style="color:red" %)**4**(%%): 4000mAh battery
1057 -* (% style="color:red" %)**8**(%%): 8500mAh battery
1058 -
1059 1059  (% class="wikigeneratedid" %)
1060 1060  (((
1061 1061  
1062 1062  )))
1063 1063  
1064 -= 7. Packing Info =
896 += 8.  Packing Info =
1065 1065  
1066 1066  (((
1067 1067  
1068 1068  
1069 1069  (% style="color:#037691" %)**Package Includes**:
1070 -)))
1071 1071  
1072 -* (((
1073 -LSE01 LoRaWAN Soil Moisture & EC Sensor x 1
903 +* NSE01 NB-IoT Soil Moisture & EC Sensor x 1
904 +* External antenna x 1
1074 1074  )))
1075 1075  
1076 1076  (((
... ... @@ -1077,30 +1077,19 @@
1077 1077  
1078 1078  
1079 1079  (% style="color:#037691" %)**Dimension and weight**:
1080 -)))
1081 1081  
1082 -* (((
1083 -Device Size: cm
912 +* Size: 195 x 125 x 55 mm
913 +* Weight:   420g
1084 1084  )))
1085 -* (((
1086 -Device Weight: g
1087 -)))
1088 -* (((
1089 -Package Size / pcs : cm
1090 -)))
1091 -* (((
1092 -Weight / pcs : g
1093 1093  
916 +(((
917 +
1094 1094  
919 +
1095 1095  
1096 1096  )))
1097 1097  
1098 -= 8. Support =
923 += 9.  Support =
1099 1099  
1100 1100  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1101 1101  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1102 -
1103 -
1104 -~)~)~)
1105 -~)~)~)
1106 -~)~)~)
1657245163077-232.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +81.0 KB
Content
1657246476176-652.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +492.6 KB
Content
1657249419225-449.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +81.0 KB
Content
1657249468462-536.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +483.6 KB
Content
1657249793983-486.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.8 KB
Content
1657249831934-534.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +72.5 KB
Content
1657249864775-321.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.0 KB
Content
1657249930215-289.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +77.3 KB
Content
1657249978444-674.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +139.5 KB
Content
1657249990869-686.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.9 KB
Content
1657250217799-140.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.7 KB
Content
1657250255956-604.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +99.0 KB
Content
1657259653666-883.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +344.4 KB
Content
1657260785982-288.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +138.2 KB
Content
1657261119050-993.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +126.1 KB
Content
1657261278785-153.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +126.1 KB
Content
1657271519014-786.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +71.5 KB
Content
1657327959271-447.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +78.3 KB
Content
1657328609906-564.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +492.6 KB
Content
1657328659945-416.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +78.8 KB
Content
1657328756309-230.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +78.5 KB
Content
1657328884227-504.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +483.6 KB
Content
image-20220610172436-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +370.3 KB
Content
image-20220708101224-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +22.2 KB
Content
image-20220708101605-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.5 KB
Content
image-20220708110657-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +251.7 KB
Content
image-20220708111918-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +38.8 KB
Content
image-20220708133731-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +8.7 KB
Content
image-20220708140453-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +132.7 KB
Content
image-20220708141352-7.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +102.7 KB
Content
image-20220709084038-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +72.0 KB
Content
image-20220709084137-2.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +72.0 KB
Content
image-20220709084207-3.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +72.0 KB
Content
image-20220709084458-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +199.5 KB
Content
image-20220709085040-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +200.4 KB
Content
image-20220709092052-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +247.3 KB
Content