Last modified by Mengting Qiu on 2024/04/02 16:44
<
From version < 22.5 >
edited by Xiaoling
on 2022/06/06 16:45
To version < 4.4 >
edited by Xiaoling
on 2022/06/06 15:23
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,6 +1,7 @@
1 1  (% style="text-align:center" %)
2 2  [[image:image-20220606151504-2.jpeg||height="848" width="848"]]
3 3  
4 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]]
4 4  
5 5  
6 6  
... ... @@ -8,40 +8,44 @@
8 8  
9 9  
10 10  
11 -= 1. Introduction =
12 12  
13 -== 1.1 ​What is LoRaWAN Soil Moisture & EC Sensor ==
14 14  
15 -(((
16 -The Dragino LSE01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil Moisture & EC Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity. It also has been calibrated in factory for Mineral soil type.
17 -)))
18 18  
19 -(((
20 -It detects (% style="color:#4f81bd" %)**Soil Moisture**(%%), (% style="color:#4f81bd" %)**Soil Temperature**(%%) and (% style="color:#4f81bd" %)**Soil Conductivity**(%%), and uploads the value via wireless to LoRaWAN IoT Server.
21 -)))
22 22  
23 -(((
16 +
17 +
18 +
19 +
20 +
21 +
22 +
23 +1. Introduction
24 +11. ​What is LoRaWAN Soil Moisture & EC Sensor
25 +
26 +The Dragino LSE01 is a **LoRaWAN Soil Moisture & EC Sensor** for IoT of Agriculture. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity. It also has been calibrated in factory for Mineral soil type.
27 +
28 +
29 +It detects **Soil Moisture**, **Soil Temperature** and **Soil Conductivity**, and uploads the value via wireless to LoRaWAN IoT Server.
30 +
31 +
24 24  The LoRa wireless technology used in LES01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
25 -)))
26 26  
27 -(((
28 -LES01 is powered by (% style="color:#4f81bd" %)**4000mA or 8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 10 years.
29 -)))
30 30  
31 -(((
32 -Each LES01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
33 -)))
35 +LES01 is powered by **4000mA or 8500mAh Li-SOCI2 battery**, It is designed for long term use up to 10 years.
34 34  
35 35  
36 -[[image:1654503236291-817.png]]
38 +Each LES01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
37 37  
38 38  
39 -[[image:1654503265560-120.png]]
41 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.png]]
40 40  
41 41  
44 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image003.png]]
42 42  
43 -== 1.2 ​Features ==
44 44  
47 +
48 +*
49 +*1. ​Features
45 45  * LoRaWAN 1.0.3 Class A
46 46  * Ultra low power consumption
47 47  * Monitor Soil Moisture
... ... @@ -54,48 +54,67 @@
54 54  * IP66 Waterproof Enclosure
55 55  * 4000mAh or 8500mAh Battery for long term use
56 56  
57 -== 1.3 Specification ==
62 +1.
63 +11. Specification
58 58  
59 59  Measure Volume: Base on the centra pin of the probe, a cylinder with 7cm diameter and 10cm height.
60 60  
61 -[[image:image-20220606162220-5.png]]
67 +|**Parameter**|**Soil Moisture**|**Soil Conductivity**|**Soil Temperature**
68 +|**Range**|**0-100.00%**|(((
69 +**0-20000uS/cm**
62 62  
71 +**(25℃)(0-20.0EC)**
72 +)))|**-40.00℃～85.00℃**
73 +|**Unit**|**V/V %,**|**uS/cm,**|**℃**
74 +|**Resolution**|**0.01%**|**1 uS/cm**|**0.01℃**
75 +|**Accuracy**|(((
76 +**±3% (0-53%)**
63 63  
78 +**±5% (>53%)**
79 +)))|**2%FS,**|(((
80 +**-10℃～50℃:<0.3℃**
64 64  
65 -== ​1.4 Applications ==
82 +**All other: <0.6℃**
83 +)))
84 +|(((
85 +**Measure**
66 66  
67 -* Smart Agriculture
87 +**Method**
88 +)))|**FDR , with temperature &EC compensate**|**Conductivity , with temperature compensate**|**RTD, and calibrate**
68 68  
69 -(% class="wikigeneratedid" id="H200B1.5FirmwareChangelog" %)
70 -​
71 71  
72 -== 1.5 Firmware Change log ==
73 73  
92 +*
93 +*1. ​Applications
94 +* Smart Agriculture
74 74  
75 -**LSE01 v1.0 :**  Release
96 +1.
97 +11. ​Firmware Change log
76 76  
99 +**LSE01 v1.0:**
77 77  
101 +* Release
78 78  
79 -= 2. Configure LSE01 to connect to LoRaWAN network =
80 80  
81 -== 2.1 How it works ==
82 82  
83 -(((
105 +1. Configure LSE01 to connect to LoRaWAN network
106 +11. How it works
107 +
84 84  The LSE01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSE0150. It will automatically join the network via OTAA and start to send the sensor value
85 -)))
86 86  
87 -(((
88 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H3.​UsingtheATCommands"]].
89 -)))
90 90  
111 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#_​Using_the_AT]]to set the keys in the LSE01.
91 91  
92 92  
93 -== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
94 94  
115 +
116 +1.
117 +11. ​Quick guide to connect to LoRaWAN server (OTAA)
118 +
95 95  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.
96 96  
97 97  
98 -[[image:1654503992078-669.png]]
122 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image003.png]]
99 99  
100 100  
101 101  The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
... ... @@ -105,40 +105,58 @@
105 105  
106 106  Each LSE01 is shipped with a sticker with the default device EUI as below:
107 107  
108 -[[image:image-20220606163732-6.jpeg]]
109 109  
133 +
134 +
110 110  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
111 111  
137 +
112 112  **Add APP EUI in the application**
113 113  
114 114  
115 -[[image:1654504596150-405.png]]
141 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]
116 116  
117 117  
118 118  
119 119  **Add APP KEY and DEV EUI**
120 120  
121 -[[image:1654504683289-357.png]]
122 122  
148 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image005.png]]
123 123  
150 +|(((
151 +
152 +)))
124 124  
154 +
155 +
156 +
125 125  **Step 2**: Power on LSE01
126 126  
127 127  
128 128  Put a Jumper on JP2 to power on the device. ( The Jumper must be in FLASH position).
129 129  
130 -[[image:image-20220606163915-7.png]]
131 131  
132 132  
164 +|(((
165 +
166 +)))
167 +
168 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.png]]
169 +
170 +
171 +
172 +
173 +
133 133  **Step 3:** The LSE01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
134 134  
135 -[[image:1654504778294-788.png]]
176 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image007.png]]
136 136  
137 137  
138 138  
139 -== 2.3 Uplink Payload ==
140 140  
141 -=== 2.3.1 MOD~=0(Default Mode) ===
181 +1.
182 +11. ​Uplink Payload
183 +111. MOD=0(Default Mode)
142 142  
143 143  LSE01 will uplink payload via LoRaWAN with below payload format: 
144 144  
... ... @@ -161,12 +161,13 @@
161 161  (Optional)
162 162  )))
163 163  
164 -[[image:1654504881641-514.png]]
206 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image007.png]]
165 165  
166 166  
209 +1.
210 +11.
211 +111. MOD=1(Original value)
167 167  
168 -=== 2.3.2 MOD~=1(Original value) ===
169 -
170 170  This mode can get the original AD value of moisture and original conductivity (with temperature drift compensation).
171 171  
172 172  |(((
... ... @@ -184,12 +184,12 @@
184 184  (Optional)
185 185  )))
186 186  
187 -[[image:1654504907647-967.png]]
230 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.png]]
188 188  
232 +1.
233 +11.
234 +111. Battery Info
189 189  
190 -
191 -=== 2.3.3 Battery Info ===
192 -
193 193  Check the battery voltage for LSE01.
194 194  
195 195  Ex1: 0x0B45 = 2885mV
... ... @@ -198,19 +198,21 @@
198 198  
199 199  
200 200  
201 -=== 2.3.4 Soil Moisture ===
244 +1.
245 +11.
246 +111. Soil Moisture
202 202  
203 203  Get the moisture content of the soil. The value range of the register is 0-10000(Decimal), divide this value by 100 to get the percentage of moisture in the soil.
204 204  
205 -For example, if the data you get from the register is __0x05 0xDC__, the moisture content in the soil is
250 +For example, if the data you get from the register is 0x05 0xDC, the moisture content in the soil is
206 206  
252 +**05DC(H) = 1500(D) /100 = 15%.**
207 207  
208 -(% style="color:#4f81bd" %)**05DC(H) = 1500(D) /100 = 15%.**
209 209  
255 +1.
256 +11.
257 +111. Soil Temperature
210 210  
211 -
212 -=== 2.3.5 Soil Temperature ===
213 -
214 214   Get the temperature in the soil. The value range of the register is -4000 - +800(Decimal), divide this value by 100 to get the temperature in the soil. For example, if the data you get from the register is 0x09 0xEC, the temperature content in the soil is
215 215  
216 216  **Example**:
... ... @@ -695,6 +695,7 @@
695 695  * [[Lithium-Thionyl Chloride Battery>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/ER18505_datasheet-EN.pdf]] datasheet, [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/ER18505_datasheet_PM-ER18505-S-02-LF_EN.pdf]]
696 696  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
697 697  
743 +
698 698  |(((
699 699  JST-XH-2P connector
700 700  )))
... ... @@ -727,155 +727,173 @@
727 727  
728 728  
729 729  
730 -= 3. ​Using the AT Commands =
776 +1. ​Using the AT Commands
777 +11. ​Access AT Commands
731 731  
732 -== 3.1 Access AT Commands ==
733 -
734 -
735 735  LSE01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSE01 for using AT command, as below.
736 736  
737 -[[image:1654501986557-872.png]]
781 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]
738 738  
739 739  
740 740  Or if you have below board, use below connection:
741 741  
742 742  
743 -[[image:1654502005655-729.png]]
787 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]]
744 744  
745 745  
746 746  
747 -In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSE01. LSE01 will output system info once power on as below:
791 +In the PC, you need to set the serial baud rate to **9600** to access the serial console for LSE01. LSE01 will output system info once power on as below:
748 748  
749 749  
750 - [[image:1654502050864-459.png]]
794 + [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
751 751  
752 752  
753 753  Below are the available commands, a more detailed AT Command manual can be found at [[AT Command Manual>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/]]: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/]]
754 754  
755 755  
756 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>? **(%%) : Help on <CMD>
800 +AT+<CMD>?        : Help on <CMD>
757 757  
758 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD> **(%%) : Run <CMD>
802 +AT+<CMD>         : Run <CMD>
759 759  
760 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>=<value>**(%%) : Set the value
804 +AT+<CMD>=<value> : Set the value
761 761  
762 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>=?**(%%)  : Get the value
806 +AT+<CMD>=?       : Get the value
763 763  
764 764  
765 -(% style="color:#037691" %)**General Commands**(%%)      
809 +**General Commands**      
766 766  
767 -(% style="background-color:#dcdcdc" %)**AT**(%%)  : Attention       
811 +AT                    : Attention       
768 768  
769 -(% style="background-color:#dcdcdc" %)**AT?**(%%)  : Short Help     
813 +AT?                            : Short Help     
770 770  
771 -(% style="background-color:#dcdcdc" %)**ATZ**(%%)  : MCU Reset    
815 +ATZ                            : MCU Reset    
772 772  
773 -(% style="background-color:#dcdcdc" %)**AT+TDC**(%%)  : Application Data Transmission Interval 
817 +AT+TDC           : Application Data Transmission Interval 
774 774  
775 775  
776 -(% style="color:#037691" %)**Keys, IDs and EUIs management**
820 +**Keys, IDs and EUIs management**
777 777  
778 -(% style="background-color:#dcdcdc" %)**AT+APPEUI**(%%)              : Application EUI      
822 +AT+APPEUI              : Application EUI      
779 779  
780 -(% style="background-color:#dcdcdc" %)**AT+APPKEY**(%%)              : Application Key     
824 +AT+APPKEY              : Application Key     
781 781  
782 -(% style="background-color:#dcdcdc" %)**AT+APPSKEY**(%%)            : Application Session Key
826 +AT+APPSKEY            : Application Session Key
783 783  
784 -(% style="background-color:#dcdcdc" %)**AT+DADDR**(%%)              : Device Address     
828 +AT+DADDR              : Device Address     
785 785  
786 -(% style="background-color:#dcdcdc" %)**AT+DEUI**(%%)                   : Device EUI     
830 +AT+DEUI                   : Device EUI     
787 787  
788 -(% style="background-color:#dcdcdc" %)**AT+NWKID**(%%)               : Network ID (You can enter this command change only after successful network connection) 
832 +AT+NWKID               : Network ID (You can enter this command change only after successful network connection) 
789 789  
790 -(% style="background-color:#dcdcdc" %)**AT+NWKSKEY**(%%)          : Network Session Key Joining and sending date on LoRa network  
834 +AT+NWKSKEY          : Network Session Key Joining and sending date on LoRa network  
791 791  
792 -(% style="background-color:#dcdcdc" %)**AT+CFM**(%%)  : Confirm Mode       
836 +AT+CFM          : Confirm Mode       
793 793  
794 -(% style="background-color:#dcdcdc" %)**AT+CFS**(%%)                     : Confirm Status       
838 +AT+CFS                     : Confirm Status       
795 795  
796 -(% style="background-color:#dcdcdc" %)**AT+JOIN**(%%)  : Join LoRa? Network       
840 +AT+JOIN          : Join LoRa? Network       
797 797  
798 -(% style="background-color:#dcdcdc" %)**AT+NJM**(%%)  : LoRa? Network Join Mode    
842 +AT+NJM          : LoRa? Network Join Mode    
799 799  
800 -(% style="background-color:#dcdcdc" %)**AT+NJS**(%%)                     : LoRa? Network Join Status    
844 +AT+NJS                     : LoRa? Network Join Status    
801 801  
802 -(% style="background-color:#dcdcdc" %)**AT+RECV**(%%)                  : Print Last Received Data in Raw Format
846 +AT+RECV                  : Print Last Received Data in Raw Format
803 803  
804 -(% style="background-color:#dcdcdc" %)**AT+RECVB**(%%)                : Print Last Received Data in Binary Format      
848 +AT+RECVB                : Print Last Received Data in Binary Format      
805 805  
806 -(% style="background-color:#dcdcdc" %)**AT+SEND**(%%)                  : Send Text Data      
850 +AT+SEND                  : Send Text Data      
807 807  
808 -(% style="background-color:#dcdcdc" %)**AT+SENB**(%%)                  : Send Hexadecimal Data
852 +AT+SENB                  : Send Hexadecimal Data
809 809  
810 810  
811 -(% style="color:#037691" %)**LoRa Network Management**
855 +**LoRa Network Management**
812 812  
813 -(% style="background-color:#dcdcdc" %)**AT+ADR**(%%)          : Adaptive Rate
857 +AT+ADR          : Adaptive Rate
814 814  
815 -(% style="background-color:#dcdcdc" %)**AT+CLASS**(%%)  : LoRa Class(Currently only support class A
859 +AT+CLASS                : LoRa Class(Currently only support class A
816 816  
817 -(% style="background-color:#dcdcdc" %)**AT+DCS**(%%)  : Duty Cycle Setting 
861 +AT+DCS           : Duty Cycle Setting 
818 818  
819 -(% style="background-color:#dcdcdc" %)**AT+DR**(%%)  : Data Rate (Can Only be Modified after ADR=0)     
863 +AT+DR                      : Data Rate (Can Only be Modified after ADR=0)     
820 820  
821 -(% style="background-color:#dcdcdc" %)**AT+FCD**(%%)  : Frame Counter Downlink       
865 +AT+FCD           : Frame Counter Downlink       
822 822  
823 -(% style="background-color:#dcdcdc" %)**AT+FCU**(%%)  : Frame Counter Uplink   
867 +AT+FCU           : Frame Counter Uplink   
824 824  
825 -(% style="background-color:#dcdcdc" %)**AT+JN1DL**(%%)  : Join Accept Delay1
869 +AT+JN1DL                : Join Accept Delay1
826 826  
827 -(% style="background-color:#dcdcdc" %)**AT+JN2DL**(%%)  : Join Accept Delay2
871 +AT+JN2DL                : Join Accept Delay2
828 828  
829 -(% style="background-color:#dcdcdc" %)**AT+PNM**(%%)  : Public Network Mode   
873 +AT+PNM                   : Public Network Mode   
830 830  
831 -(% style="background-color:#dcdcdc" %)**AT+RX1DL**(%%)  : Receive Delay1      
875 +AT+RX1DL                : Receive Delay1      
832 832  
833 -(% style="background-color:#dcdcdc" %)**AT+RX2DL**(%%)  : Receive Delay2      
877 +AT+RX2DL                : Receive Delay2      
834 834  
835 -(% style="background-color:#dcdcdc" %)**AT+RX2DR**(%%)  : Rx2 Window Data Rate 
879 +AT+RX2DR               : Rx2 Window Data Rate 
836 836  
837 -(% style="background-color:#dcdcdc" %)**AT+RX2FQ**(%%)  : Rx2 Window Frequency
881 +AT+RX2FQ               : Rx2 Window Frequency
838 838  
839 -(% style="background-color:#dcdcdc" %)**AT+TXP**(%%)  : Transmit Power
883 +AT+TXP           : Transmit Power
840 840  
841 -(% style="background-color:#dcdcdc" %)**AT+ MOD**(%%)  : Set work mode
885 +AT+ MOD                 : Set work mode
842 842  
843 843  
844 -(% style="color:#037691" %)**Information** 
888 +**Information** 
845 845  
846 -(% style="background-color:#dcdcdc" %)**AT+RSSI**(%%)           : RSSI of the Last Received Packet   
890 +AT+RSSI           : RSSI of the Last Received Packet   
847 847  
848 -(% style="background-color:#dcdcdc" %)**AT+SNR**(%%)           : SNR of the Last Received Packet   
892 +AT+SNR           : SNR of the Last Received Packet   
849 849  
850 -(% style="background-color:#dcdcdc" %)**AT+VER**(%%)           : Image Version and Frequency Band       
894 +AT+VER           : Image Version and Frequency Band       
851 851  
852 -(% style="background-color:#dcdcdc" %)**AT+FDR**(%%)           : Factory Data Reset
896 +AT+FDR           : Factory Data Reset
853 853  
854 -(% style="background-color:#dcdcdc" %)**AT+PORT**(%%)  : Application Port    
898 +AT+PORT                  : Application Port    
855 855  
856 -(% style="background-color:#dcdcdc" %)**AT+CHS**(%%)  : Get or Set Frequency (Unit: Hz) for Single Channel Mode
900 +AT+CHS           : Get or Set Frequency (Unit: Hz) for Single Channel Mode
857 857  
858 - (% style="background-color:#dcdcdc" %)**AT+CHE**(%%)  : Get or Set eight channels mode, Only for US915, AU915, CN470
902 + AT+CHE                   : Get or Set eight channels mode, Only for US915, AU915, CN470
859 859  
860 860  
861 -= ​4. FAQ =
862 862  
863 -== 4.1 ​How to change the LoRa Frequency Bands/Region? ==
864 864  
907 +
908 +
909 +
910 +1. ​FAQ
911 +11. ​How to change the LoRa Frequency Bands/Region?
912 +
865 865  You can follow the instructions for [[how to upgrade image>>path:#3ygebqi]].
866 866  When downloading the images, choose the required image file for download. ​
867 867  
868 868  
869 -How to set up LSE01 to work in 8 channel mode By default, the frequency bands US915, AU915, CN470 work in 72 frequencies. Many gateways are 8 channel gateways, and in this case, the OTAA join time and uplink schedule is long and unpredictable while the end node is hopping in 72 frequencies.
870 870  
918 +How to set up LSE01 to work in 8 channel mode
871 871  
920 +By default, the frequency bands US915, AU915, CN470 work in 72 frequencies. Many gateways are 8 channel gateways, and in this case, the OTAA join time and uplink schedule is long and unpredictable while the end node is hopping in 72 frequencies.
921 +
922 +
872 872  You can configure the end node to work in 8 channel mode by using the AT+CHE command. The 500kHz channels are always included for OTAA.
873 873  
874 874  
926 +
875 875  For example, in **US915** band, the frequency table is as below. By default, the end node will use all channels (0~~71) for OTAA Join process. After the OTAA Join, the end node will use these all channels (0~~71) to send uplink packets.
876 876  
877 -[[image:image-20220606154726-3.png]]
878 878  
930 +|CHE|(% colspan="9" %)US915 Uplink Channels(125KHz,4/5,Unit:MHz,CHS=0)
931 +|0|(% colspan="9" %)ENABLE Channel 0-63
932 +|1|902.3|902.5|902.7|902.9|903.1|903.3|903.5|903.7|Channel 0-7
933 +|2|903.9|904.1|904.3|904.5|904.7|904.9|905.1|905.3|Channel 8-15
934 +|3|905.5|905.7|905.9|906.1|906.3|906.5|906.7|906.9|Channel 16-23
935 +|4|907.1|907.3|907.5|907.7|907.9|908.1|908.3|908.5|Channel 24-31
936 +|5|908.7|908.9|909.1|909.3|909.5|909.7|909.9|910.1|Channel 32-39
937 +|6|910.3|910.5|910.7|910.9|911.1|911.3|911.5|911.7|Channel 40-47
938 +|7|911.9|912.1|912.3|912.5|912.7|912.9|913.1|913.3|Channel 48-55
939 +|8|913.5|913.7|913.9|914.1|914.3|914.5|914.7|914.9|Channel 56-63
940 +|(% colspan="10" %)Channels(500KHz,4/5,Unit:MHz,CHS=0)
941 +| |903|904.6|906.2|907.8|909.4|911|912.6|914.2|Channel 64-71
942 +
879 879  When you use the TTN network, the US915 frequency bands use are:
880 880  
881 881  * 903.9 - SF7BW125 to SF10BW125
... ... @@ -890,15 +890,9 @@
890 890  
891 891  Because the end node is now hopping in 72 frequency, it makes it difficult for the devices to Join the TTN network and uplink data. To solve this issue, you can access the device via the AT commands and run:
892 892  
893 -(% class="box infomessage" %)
894 -(((
895 895  **AT+CHE=2**
896 -)))
897 897  
898 -(% class="box infomessage" %)
899 -(((
900 900  **ATZ**
901 -)))
902 902  
903 903  to set the end node to work in 8 channel mode. The device will work in Channel 8-15 & 64-71 for OTAA, and channel 8-15 for Uplink.
904 904  
... ... @@ -905,48 +905,65 @@
905 905  
906 906  The **AU915** band is similar. Below are the AU915 Uplink Channels.
907 907  
908 -[[image:image-20220606154825-4.png]]
909 909  
967 +|CHE|(% colspan="9" %)AU915 Uplink Channels(125KHz,4/5,Unit:MHz,CHS=0)
968 +|0|(% colspan="9" %)ENABLE Channel 0-63
969 +|1|915.2|915.4|915.6|915.8|916|916.2|916.4|916.6|Channel 0-7
970 +|2|916.8|917|917.2|917.4|917.6|917.8|918|918.2|Channel 8-15
971 +|3|918.4|918.6|918.8|919|919.2|919.4|919.6|919.8|Channel 16-23
972 +|4|920|920.2|920.4|920.6|920.8|921|921.2|921.4|Channel 24-31
973 +|5|921.6|921.8|922|922.2|922.4|922.6|922.8|923|Channel 32-39
974 +|6|923.2|923.4|923.6|923.8|924|924.2|924.4|924.6|Channel 40-47
975 +|7|924.8|925|925.2|925.4|925.6|925.8|926|926.2|Channel 48-55
976 +|8|926.4|926.6|926.8|927|927.2|927.4|927.6|927.8|Channel 56-63
977 +|(% colspan="10" %)Channels(500KHz,4/5,Unit:MHz,CHS=0)
978 +| |915.9|917.5|919.1|920.7|922.3|923.9|925.5|927.1|Channel 64-71
910 910  
911 911  
912 -= 5. Trouble Shooting =
913 913  
914 -== 5.1 ​Why I can’t join TTN in US915 / AU915 bands? ==
915 915  
916 -It is due to channel mapping. Please see the [[Eight Channel Mode>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]] section above for details.
917 917  
984 +1. ​Trouble Shooting
985 +11. ​Why I can’t join TTN in US915 / AU915 bands?
918 918  
919 -== 5.2 AT Command input doesn’t work ==
987 +It is due to channel mapping. Please see the [[Eight Channel Mode>>path:#206ipza]] section above for details.
920 920  
921 -In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
922 922  
923 923  
924 -== 5.3 Device rejoin in at the second uplink packet ==
991 +1.
992 +11. AT Command input doesn’t work
925 925  
926 -(% style="color:#4f81bd" %)**Issue describe as below:**
994 +In the case if user can see the console output but can’t type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn’t send **ENTER** while press the send key, user need to add ENTER in their string.
927 927  
928 -[[image:1654500909990-784.png]]
929 929  
930 930  
931 -(% style="color:#4f81bd" %)**Cause for this issue:**
932 932  
999 +1.
1000 +11. Device rejoin in at the second uplink packet.
1001 +
1002 +**Issue describe as below:**
1003 +
1004 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]
1005 +
1006 +
1007 +**Cause for this issue:**
1008 +
933 933  The fuse on LSE01 is not large enough, some of the soil probe require large current up to 5v 800mA, in a short pulse. When this happen, it cause the device reboot so user see rejoin.
934 934  
935 935  
936 -(% style="color:#4f81bd" %)**Solution: **
1012 +**Solution: **
937 937  
938 938  All new shipped LSE01 after 2020-May-30 will have this to fix. For the customer who see this issue, please bypass the fuse as below:
939 939  
940 -[[image:1654500929571-736.png]]
1016 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
941 941  
942 -
943 943  = 6. ​Order Info =
944 944  
945 945  
946 -Part Number**:** (% style="color:#4f81bd" %)**LSE01-XX-YY**
1021 +Part Number: (% style="color:#4f81bd" %)**LSE01-XX-YY**
947 947  
948 948  
949 -(% style="color:#4f81bd" %)**XX**(%%)**:** The default frequency band
1024 +(% style="color:#4f81bd" %)**XX**(%%): The default frequency band
950 950  
951 951  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
952 952  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
... ... @@ -954,7 +954,7 @@
954 954  * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
955 955  * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
956 956  * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
957 -* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1032 +* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
958 958  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
959 959  
960 960  (% style="color:#4f81bd" %)**YY**(%%)**: **Battery Option
... ... @@ -962,6 +962,7 @@
962 962  * (% style="color:red" %)**4**(%%): 4000mAh battery
963 963  * (% style="color:red" %)**8**(%%): 8500mAh battery
964 964  
1040 +
965 965  = 7. Packing Info =
966 966  
967 967  (((
1654500909990-784.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.6 KB
Content
1654500929571-736.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -991.8 KB
Content
1654501986557-872.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -767.2 KB
Content
1654502005655-729.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -915.0 KB
Content
1654502050864-459.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.6 KB
Content
1654503236291-817.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -685.6 KB
Content
1654503265560-120.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.8 KB
Content
1654503992078-669.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.8 KB
Content
1654504596150-405.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -66.7 KB
Content
1654504683289-357.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -94.0 KB
Content
1654504778294-788.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.4 KB
Content
1654504881641-514.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.4 KB
Content
1654504907647-967.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -54.7 KB
Content
image-20220606154726-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -35.1 KB
Content
image-20220606154825-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -35.3 KB
Content
image-20220606162220-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -23.0 KB
Content
image-20220606163732-6.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.5 KB
Content
image-20220606163915-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -94.8 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0