<
From version < 22.4 >
edited by Xiaoling
on 2022/06/06 16:44
To version < 8.1 >
edited by Xiaoling
on 2022/06/06 15:48
>
Change comment: Uploaded new attachment "image-20220606154825-4.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -1,6 +1,7 @@
1 1  (% style="text-align:center" %)
2 2  [[image:image-20220606151504-2.jpeg||height="848" width="848"]]
3 3  
4 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]]
4 4  
5 5  
6 6  
... ... @@ -8,40 +8,44 @@
8 8  
9 9  
10 10  
11 -= 1. Introduction =
12 12  
13 -== 1.1 ​What is LoRaWAN Soil Moisture & EC Sensor ==
14 14  
15 -(((
16 -The Dragino LSE01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil Moisture & EC Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity. It also has been calibrated in factory for Mineral soil type.
17 -)))
18 18  
19 -(((
20 -It detects (% style="color:#4f81bd" %)**Soil Moisture**(%%), (% style="color:#4f81bd" %)**Soil Temperature**(%%) and (% style="color:#4f81bd" %)**Soil Conductivity**(%%), and uploads the value via wireless to LoRaWAN IoT Server.
21 -)))
22 22  
23 -(((
16 +
17 +
18 +
19 +
20 +
21 +
22 +
23 +1. Introduction
24 +11. ​What is LoRaWAN Soil Moisture & EC Sensor
25 +
26 +The Dragino LSE01 is a **LoRaWAN Soil Moisture & EC Sensor** for IoT of Agriculture. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity. It also has been calibrated in factory for Mineral soil type.
27 +
28 +
29 +It detects **Soil Moisture**, **Soil Temperature** and **Soil Conductivity**, and uploads the value via wireless to LoRaWAN IoT Server.
30 +
31 +
24 24  The LoRa wireless technology used in LES01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
25 -)))
26 26  
27 -(((
28 -LES01 is powered by (% style="color:#4f81bd" %)**4000mA or 8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 10 years.
29 -)))
30 30  
31 -(((
32 -Each LES01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
33 -)))
35 +LES01 is powered by **4000mA or 8500mAh Li-SOCI2 battery**, It is designed for long term use up to 10 years.
34 34  
35 35  
36 -[[image:1654503236291-817.png]]
38 +Each LES01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
37 37  
38 38  
39 -[[image:1654503265560-120.png]]
41 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.png]]
40 40  
41 41  
44 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image003.png]]
42 42  
43 -== 1.2 ​Features ==
44 44  
47 +
48 +*
49 +*1. ​Features
45 45  * LoRaWAN 1.0.3 Class A
46 46  * Ultra low power consumption
47 47  * Monitor Soil Moisture
... ... @@ -54,48 +54,63 @@
54 54  * IP66 Waterproof Enclosure
55 55  * 4000mAh or 8500mAh Battery for long term use
56 56  
57 -== 1.3 Specification ==
62 +1.
63 +11. Specification
58 58  
59 59  Measure Volume: Base on the centra pin of the probe, a cylinder with 7cm diameter and 10cm height.
60 60  
61 -[[image:image-20220606162220-5.png]]
67 +|**Parameter**|**Soil Moisture**|**Soil Conductivity**|**Soil Temperature**
68 +|**Range**|**0-100.00%**|(((
69 +**0-20000uS/cm**
62 62  
71 +**(25℃)(0-20.0EC)**
72 +)))|**-40.00℃~85.00℃**
73 +|**Unit**|**V/V %,**|**uS/cm,**|**℃**
74 +|**Resolution**|**0.01%**|**1 uS/cm**|**0.01℃**
75 +|**Accuracy**|(((
76 +**±3% (0-53%)**
63 63  
78 +**±5% (>53%)**
79 +)))|**2%FS,**|(((
80 +**-10℃~50℃:<0.3℃**
64 64  
65 -== ​1.4 Applications ==
82 +**All other: <0.6℃**
83 +)))
84 +|(((
85 +**Measure**
66 66  
87 +**Method**
88 +)))|**FDR , with temperature &EC compensate**|**Conductivity , with temperature compensate**|**RTD, and calibrate**
89 +
90 +*
91 +*1. ​Applications
67 67  * Smart Agriculture
68 68  
69 -(% class="wikigeneratedid" id="H200B1.5FirmwareChangelog" %)
70 -​
94 +1.
95 +11. Firmware Change log
71 71  
72 -== 1.5 Firmware Change log ==
97 +**LSE01 v1.0:**
73 73  
99 +* Release
74 74  
75 -**LSE01 v1.0 :**  Release
101 +1. Configure LSE01 to connect to LoRaWAN network
102 +11. How it works
76 76  
104 +The LSE01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSE0150. It will automatically join the network via OTAA and start to send the sensor value
77 77  
78 78  
79 -= 2. Configure LSE01 to connect to LoRaWAN network =
107 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#_​Using_the_AT]]to set the keys in the LSE01.
80 80  
81 -== 2.1 How it works ==
82 82  
83 -(((
84 -The LSE01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSE0150. It will automatically join the network via OTAA and start to send the sensor value
85 -)))
86 86  
87 -(((
88 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H3.​UsingtheATCommands"]].
89 -)))
90 90  
112 +1.
113 +11. ​Quick guide to connect to LoRaWAN server (OTAA)
91 91  
92 -
93 -== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
94 -
95 95  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.
96 96  
97 97  
98 -[[image:1654503992078-669.png]]
118 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image003.png]]
99 99  
100 100  
101 101  The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
... ... @@ -105,40 +105,56 @@
105 105  
106 106  Each LSE01 is shipped with a sticker with the default device EUI as below:
107 107  
108 -[[image:image-20220606163732-6.jpeg]]
109 109  
129 +
130 +
110 110  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
111 111  
133 +
112 112  **Add APP EUI in the application**
113 113  
114 114  
115 -[[image:1654504596150-405.png]]
137 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]
116 116  
117 117  
118 118  
119 119  **Add APP KEY and DEV EUI**
120 120  
121 -[[image:1654504683289-357.png]]
122 122  
144 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image005.png]]
123 123  
146 +|(((
147 +
148 +)))
124 124  
150 +
125 125  **Step 2**: Power on LSE01
126 126  
127 127  
128 128  Put a Jumper on JP2 to power on the device. ( The Jumper must be in FLASH position).
129 129  
130 -[[image:image-20220606163915-7.png]]
131 131  
132 132  
158 +|(((
159 +
160 +)))
161 +
162 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.png]]
163 +
164 +
165 +
166 +
167 +
133 133  **Step 3:** The LSE01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
134 134  
135 -[[image:1654504778294-788.png]]
170 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image007.png]]
136 136  
137 137  
138 138  
139 -== 2.3 Uplink Payload ==
140 140  
141 -=== 2.3.1 MOD~=0(Default Mode) ===
175 +1.
176 +11. ​Uplink Payload
177 +111. MOD=0(Default Mode)
142 142  
143 143  LSE01 will uplink payload via LoRaWAN with below payload format: 
144 144  
... ... @@ -161,12 +161,13 @@
161 161  (Optional)
162 162  )))
163 163  
164 -[[image:1654504881641-514.png]]
200 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image007.png]]
165 165  
166 166  
203 +1.
204 +11.
205 +111. MOD=1(Original value)
167 167  
168 -=== 2.3.2 MOD~=1(Original value) ===
169 -
170 170  This mode can get the original AD value of moisture and original conductivity (with temperature drift compensation).
171 171  
172 172  |(((
... ... @@ -184,12 +184,12 @@
184 184  (Optional)
185 185  )))
186 186  
187 -[[image:1654504907647-967.png]]
224 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.png]]
188 188  
226 +1.
227 +11.
228 +111. Battery Info
189 189  
190 -
191 -=== 2.3.3 Battery Info ===
192 -
193 193  Check the battery voltage for LSE01.
194 194  
195 195  Ex1: 0x0B45 = 2885mV
... ... @@ -198,16 +198,17 @@
198 198  
199 199  
200 200  
201 -=== 2.3.4 Soil Moisture ===
238 +1.
239 +11.
240 +111. Soil Moisture
202 202  
203 203  Get the moisture content of the soil. The value range of the register is 0-10000(Decimal), divide this value by 100 to get the percentage of moisture in the soil.
204 204  
205 -For example, if the data you get from the register is __0x05 0xDC__, the moisture content in the soil is
244 +For example, if the data you get from the register is 0x05 0xDC, the moisture content in the soil is
206 206  
246 +**05DC(H) = 1500(D) /100 = 15%.**
207 207  
208 -(% style="color:#4f81bd" %)**05DC(H) = 1500(D) /100 = 15%.**
209 209  
210 -
211 211  1.
212 212  11.
213 213  111. Soil Temperature
... ... @@ -728,137 +728,140 @@
728 728  
729 729  
730 730  
731 -= 3. ​Using the AT Commands =
769 +1. ​Using the AT Commands
770 +11. ​Access AT Commands
732 732  
733 -== 3.1 Access AT Commands ==
734 -
735 -
736 736  LSE01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSE01 for using AT command, as below.
737 737  
738 -[[image:1654501986557-872.png]]
774 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]
739 739  
740 740  
741 741  Or if you have below board, use below connection:
742 742  
743 743  
744 -[[image:1654502005655-729.png]]
780 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]]
745 745  
746 746  
747 747  
748 -In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSE01. LSE01 will output system info once power on as below:
784 +In the PC, you need to set the serial baud rate to **9600** to access the serial console for LSE01. LSE01 will output system info once power on as below:
749 749  
750 750  
751 - [[image:1654502050864-459.png]]
787 + [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
752 752  
753 753  
754 754  Below are the available commands, a more detailed AT Command manual can be found at [[AT Command Manual>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/]]: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/]]
755 755  
756 756  
757 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>? **(%%) : Help on <CMD>
793 +AT+<CMD>?        : Help on <CMD>
758 758  
759 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD> **(%%) : Run <CMD>
795 +AT+<CMD>         : Run <CMD>
760 760  
761 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>=<value>**(%%) : Set the value
797 +AT+<CMD>=<value> : Set the value
762 762  
763 -(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>=?**(%%)  : Get the value
799 +AT+<CMD>=?       : Get the value
764 764  
765 765  
766 -(% style="color:#037691" %)**General Commands**(%%)      
802 +**General Commands**      
767 767  
768 -(% style="background-color:#dcdcdc" %)**AT**(%%)  : Attention       
804 +AT                    : Attention       
769 769  
770 -(% style="background-color:#dcdcdc" %)**AT?**(%%)  : Short Help     
806 +AT?                            : Short Help     
771 771  
772 -(% style="background-color:#dcdcdc" %)**ATZ**(%%)  : MCU Reset    
808 +ATZ                            : MCU Reset    
773 773  
774 -(% style="background-color:#dcdcdc" %)**AT+TDC**(%%)  : Application Data Transmission Interval 
810 +AT+TDC           : Application Data Transmission Interval 
775 775  
776 776  
777 -(% style="color:#037691" %)**Keys, IDs and EUIs management**
813 +**Keys, IDs and EUIs management**
778 778  
779 -(% style="background-color:#dcdcdc" %)**AT+APPEUI**(%%)              : Application EUI      
815 +AT+APPEUI              : Application EUI      
780 780  
781 -(% style="background-color:#dcdcdc" %)**AT+APPKEY**(%%)              : Application Key     
817 +AT+APPKEY              : Application Key     
782 782  
783 -(% style="background-color:#dcdcdc" %)**AT+APPSKEY**(%%)            : Application Session Key
819 +AT+APPSKEY            : Application Session Key
784 784  
785 -(% style="background-color:#dcdcdc" %)**AT+DADDR**(%%)              : Device Address     
821 +AT+DADDR              : Device Address     
786 786  
787 -(% style="background-color:#dcdcdc" %)**AT+DEUI**(%%)                   : Device EUI     
823 +AT+DEUI                   : Device EUI     
788 788  
789 -(% style="background-color:#dcdcdc" %)**AT+NWKID**(%%)               : Network ID (You can enter this command change only after successful network connection) 
825 +AT+NWKID               : Network ID (You can enter this command change only after successful network connection) 
790 790  
791 -(% style="background-color:#dcdcdc" %)**AT+NWKSKEY**(%%)          : Network Session Key Joining and sending date on LoRa network  
827 +AT+NWKSKEY          : Network Session Key Joining and sending date on LoRa network  
792 792  
793 -(% style="background-color:#dcdcdc" %)**AT+CFM**(%%)  : Confirm Mode       
829 +AT+CFM          : Confirm Mode       
794 794  
795 -(% style="background-color:#dcdcdc" %)**AT+CFS**(%%)                     : Confirm Status       
831 +AT+CFS                     : Confirm Status       
796 796  
797 -(% style="background-color:#dcdcdc" %)**AT+JOIN**(%%)  : Join LoRa? Network       
833 +AT+JOIN          : Join LoRa? Network       
798 798  
799 -(% style="background-color:#dcdcdc" %)**AT+NJM**(%%)  : LoRa? Network Join Mode    
835 +AT+NJM          : LoRa? Network Join Mode    
800 800  
801 -(% style="background-color:#dcdcdc" %)**AT+NJS**(%%)                     : LoRa? Network Join Status    
837 +AT+NJS                     : LoRa? Network Join Status    
802 802  
803 -(% style="background-color:#dcdcdc" %)**AT+RECV**(%%)                  : Print Last Received Data in Raw Format
839 +AT+RECV                  : Print Last Received Data in Raw Format
804 804  
805 -(% style="background-color:#dcdcdc" %)**AT+RECVB**(%%)                : Print Last Received Data in Binary Format      
841 +AT+RECVB                : Print Last Received Data in Binary Format      
806 806  
807 -(% style="background-color:#dcdcdc" %)**AT+SEND**(%%)                  : Send Text Data      
843 +AT+SEND                  : Send Text Data      
808 808  
809 -(% style="background-color:#dcdcdc" %)**AT+SENB**(%%)                  : Send Hexadecimal Data
845 +AT+SENB                  : Send Hexadecimal Data
810 810  
811 811  
812 -(% style="color:#037691" %)**LoRa Network Management**
848 +**LoRa Network Management**
813 813  
814 -(% style="background-color:#dcdcdc" %)**AT+ADR**(%%)          : Adaptive Rate
850 +AT+ADR          : Adaptive Rate
815 815  
816 -(% style="background-color:#dcdcdc" %)**AT+CLASS**(%%)  : LoRa Class(Currently only support class A
852 +AT+CLASS                : LoRa Class(Currently only support class A
817 817  
818 -(% style="background-color:#dcdcdc" %)**AT+DCS**(%%)  : Duty Cycle Setting 
854 +AT+DCS           : Duty Cycle Setting 
819 819  
820 -(% style="background-color:#dcdcdc" %)**AT+DR**(%%)  : Data Rate (Can Only be Modified after ADR=0)     
856 +AT+DR                      : Data Rate (Can Only be Modified after ADR=0)     
821 821  
822 -(% style="background-color:#dcdcdc" %)**AT+FCD**(%%)  : Frame Counter Downlink       
858 +AT+FCD           : Frame Counter Downlink       
823 823  
824 -(% style="background-color:#dcdcdc" %)**AT+FCU**(%%)  : Frame Counter Uplink   
860 +AT+FCU           : Frame Counter Uplink   
825 825  
826 -(% style="background-color:#dcdcdc" %)**AT+JN1DL**(%%)  : Join Accept Delay1
862 +AT+JN1DL                : Join Accept Delay1
827 827  
828 -(% style="background-color:#dcdcdc" %)**AT+JN2DL**(%%)  : Join Accept Delay2
864 +AT+JN2DL                : Join Accept Delay2
829 829  
830 -(% style="background-color:#dcdcdc" %)**AT+PNM**(%%)  : Public Network Mode   
866 +AT+PNM                   : Public Network Mode   
831 831  
832 -(% style="background-color:#dcdcdc" %)**AT+RX1DL**(%%)  : Receive Delay1      
868 +AT+RX1DL                : Receive Delay1      
833 833  
834 -(% style="background-color:#dcdcdc" %)**AT+RX2DL**(%%)  : Receive Delay2      
870 +AT+RX2DL                : Receive Delay2      
835 835  
836 -(% style="background-color:#dcdcdc" %)**AT+RX2DR**(%%)  : Rx2 Window Data Rate 
872 +AT+RX2DR               : Rx2 Window Data Rate 
837 837  
838 -(% style="background-color:#dcdcdc" %)**AT+RX2FQ**(%%)  : Rx2 Window Frequency
874 +AT+RX2FQ               : Rx2 Window Frequency
839 839  
840 -(% style="background-color:#dcdcdc" %)**AT+TXP**(%%)  : Transmit Power
876 +AT+TXP           : Transmit Power
841 841  
842 -(% style="background-color:#dcdcdc" %)**AT+ MOD**(%%)  : Set work mode
878 +AT+ MOD                 : Set work mode
843 843  
844 844  
845 -(% style="color:#037691" %)**Information** 
881 +**Information** 
846 846  
847 -(% style="background-color:#dcdcdc" %)**AT+RSSI**(%%)           : RSSI of the Last Received Packet   
883 +AT+RSSI           : RSSI of the Last Received Packet   
848 848  
849 -(% style="background-color:#dcdcdc" %)**AT+SNR**(%%)           : SNR of the Last Received Packet   
885 +AT+SNR           : SNR of the Last Received Packet   
850 850  
851 -(% style="background-color:#dcdcdc" %)**AT+VER**(%%)           : Image Version and Frequency Band       
887 +AT+VER           : Image Version and Frequency Band       
852 852  
853 -(% style="background-color:#dcdcdc" %)**AT+FDR**(%%)           : Factory Data Reset
889 +AT+FDR           : Factory Data Reset
854 854  
855 -(% style="background-color:#dcdcdc" %)**AT+PORT**(%%)  : Application Port    
891 +AT+PORT                  : Application Port    
856 856  
857 -(% style="background-color:#dcdcdc" %)**AT+CHS**(%%)  : Get or Set Frequency (Unit: Hz) for Single Channel Mode
893 +AT+CHS           : Get or Set Frequency (Unit: Hz) for Single Channel Mode
858 858  
859 - (% style="background-color:#dcdcdc" %)**AT+CHE**(%%)  : Get or Set eight channels mode, Only for US915, AU915, CN470
895 + AT+CHE                   : Get or Set eight channels mode, Only for US915, AU915, CN470
860 860  
861 861  
898 +
899 +
900 +
901 +
902 +
862 862  = ​4. FAQ =
863 863  
864 864  == 4.1 ​How to change the LoRa Frequency Bands/Region? ==
... ... @@ -867,16 +867,33 @@
867 867  When downloading the images, choose the required image file for download. ​
868 868  
869 869  
870 -How to set up LSE01 to work in 8 channel mode By default, the frequency bands US915, AU915, CN470 work in 72 frequencies. Many gateways are 8 channel gateways, and in this case, the OTAA join time and uplink schedule is long and unpredictable while the end node is hopping in 72 frequencies.
871 871  
912 +How to set up LSE01 to work in 8 channel mode
872 872  
914 +By default, the frequency bands US915, AU915, CN470 work in 72 frequencies. Many gateways are 8 channel gateways, and in this case, the OTAA join time and uplink schedule is long and unpredictable while the end node is hopping in 72 frequencies.
915 +
916 +
873 873  You can configure the end node to work in 8 channel mode by using the AT+CHE command. The 500kHz channels are always included for OTAA.
874 874  
875 875  
920 +
876 876  For example, in **US915** band, the frequency table is as below. By default, the end node will use all channels (0~~71) for OTAA Join process. After the OTAA Join, the end node will use these all channels (0~~71) to send uplink packets.
877 877  
878 -[[image:image-20220606154726-3.png]]
879 879  
924 +(% border="1" cellspacing="10" style="background-color:#f7faff" %)
925 +|=(% style="width: 56px;" %)CHE|=(% colspan="9" style="width: 1433px;" %)US915 Uplink Channels(125KHz,4/5,Unit:MHz,CHS=0)
926 +|(% style="width:56px" %)0|(% colspan="9" style="width:1433px" %)ENABLE Channel 0-63
927 +|(% style="width:56px" %)1|(% style="width:63px" %)902.3|(% style="width:70px" %)902.5|(% style="width:68px" %)902.7|(% style="width:70px" %)902.9|(% style="width:464px" %)903.1|903.3|903.5|903.7|Channel 0-7
928 +|(% style="width:56px" %)2|(% style="width:63px" %)903.9|(% style="width:70px" %)904.1|(% style="width:68px" %)904.3|(% style="width:70px" %)904.5|(% style="width:464px" %)904.7|904.9|905.1|905.3|Channel 8-15
929 +|(% style="width:56px" %)3|(% style="width:63px" %)905.5|(% style="width:70px" %)905.7|(% style="width:68px" %)905.9|(% style="width:70px" %)906.1|(% style="width:464px" %)906.3|906.5|906.7|906.9|Channel 16-23
930 +|(% style="width:56px" %)4|(% style="width:63px" %)907.1|(% style="width:70px" %)907.3|(% style="width:68px" %)907.5|(% style="width:70px" %)907.7|(% style="width:464px" %)907.9|908.1|908.3|908.5|Channel 24-31
931 +|(% style="width:56px" %)5|(% style="width:63px" %)908.7|(% style="width:70px" %)908.9|(% style="width:68px" %)909.1|(% style="width:70px" %)909.3|(% style="width:464px" %)909.5|909.7|909.9|910.1|Channel 32-39
932 +|(% style="width:56px" %)6|(% style="width:63px" %)910.3|(% style="width:70px" %)910.5|(% style="width:68px" %)910.7|(% style="width:70px" %)910.9|(% style="width:464px" %)911.1|911.3|911.5|911.7|Channel 40-47
933 +|(% style="width:56px" %)7|(% style="width:63px" %)911.9|(% style="width:70px" %)912.1|(% style="width:68px" %)912.3|(% style="width:70px" %)912.5|(% style="width:464px" %)912.7|912.9|913.1|913.3|Channel 48-55
934 +|(% style="width:56px" %)8|(% style="width:63px" %)913.5|(% style="width:70px" %)913.7|(% style="width:68px" %)913.9|(% style="width:70px" %)914.1|(% style="width:464px" %)914.3|914.5|914.7|914.9|Channel 56-63
935 +|(% colspan="10" %)Channels(500KHz,4/5,Unit:MHz,CHS=0)
936 +|(% style="width:56px" %) |(% style="width:63px" %)903|(% style="width:70px" %)904.6|(% style="width:68px" %)906.2|(% style="width:70px" %)907.8|(% style="width:464px" %)909.4|911|912.6|914.2|Channel 64-71
937 +
880 880  When you use the TTN network, the US915 frequency bands use are:
881 881  
882 882  * 903.9 - SF7BW125 to SF10BW125
... ... @@ -891,15 +891,9 @@
891 891  
892 892  Because the end node is now hopping in 72 frequency, it makes it difficult for the devices to Join the TTN network and uplink data. To solve this issue, you can access the device via the AT commands and run:
893 893  
894 -(% class="box infomessage" %)
895 -(((
896 896  **AT+CHE=2**
897 -)))
898 898  
899 -(% class="box infomessage" %)
900 -(((
901 901  **ATZ**
902 -)))
903 903  
904 904  to set the end node to work in 8 channel mode. The device will work in Channel 8-15 & 64-71 for OTAA, and channel 8-15 for Uplink.
905 905  
... ... @@ -906,12 +906,25 @@
906 906  
907 907  The **AU915** band is similar. Below are the AU915 Uplink Channels.
908 908  
909 -[[image:image-20220606154825-4.png]]
910 910  
962 +|CHE|(% colspan="9" %)AU915 Uplink Channels(125KHz,4/5,Unit:MHz,CHS=0)
963 +|0|(% colspan="9" %)ENABLE Channel 0-63
964 +|1|915.2|915.4|915.6|915.8|916|916.2|916.4|916.6|Channel 0-7
965 +|2|916.8|917|917.2|917.4|917.6|917.8|918|918.2|Channel 8-15
966 +|3|918.4|918.6|918.8|919|919.2|919.4|919.6|919.8|Channel 16-23
967 +|4|920|920.2|920.4|920.6|920.8|921|921.2|921.4|Channel 24-31
968 +|5|921.6|921.8|922|922.2|922.4|922.6|922.8|923|Channel 32-39
969 +|6|923.2|923.4|923.6|923.8|924|924.2|924.4|924.6|Channel 40-47
970 +|7|924.8|925|925.2|925.4|925.6|925.8|926|926.2|Channel 48-55
971 +|8|926.4|926.6|926.8|927|927.2|927.4|927.6|927.8|Channel 56-63
972 +|(% colspan="10" %)Channels(500KHz,4/5,Unit:MHz,CHS=0)
973 +| |915.9|917.5|919.1|920.7|922.3|923.9|925.5|927.1|Channel 64-71
911 911  
912 912  
976 +
913 913  = 5. Trouble Shooting =
914 914  
979 +
915 915  == 5.1 ​Why I can’t join TTN in US915 / AU915 bands? ==
916 916  
917 917  It is due to channel mapping. Please see the [[Eight Channel Mode>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]] section above for details.
1654501986557-872.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -767.2 KB
Content
1654502005655-729.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -915.0 KB
Content
1654502050864-459.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -174.6 KB
Content
1654503236291-817.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -685.6 KB
Content
1654503265560-120.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.8 KB
Content
1654503992078-669.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.8 KB
Content
1654504596150-405.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -66.7 KB
Content
1654504683289-357.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -94.0 KB
Content
1654504778294-788.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.4 KB
Content
1654504881641-514.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.4 KB
Content
1654504907647-967.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -54.7 KB
Content
image-20220606162220-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -23.0 KB
Content
image-20220606163732-6.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.5 KB
Content
image-20220606163915-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -94.8 KB
Content
Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0