Last modified by Mengting Qiu on 2024/04/02 16:44
<
From version < 130.2 >
edited by Xiaoling
on 2023/04/24 09:10
To version < 115.6 >
edited by Xiaoling
on 2022/07/09 17:18
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -9,7 +9,6 @@
9 9  
10 10  **Table of Contents:**
11 11  
12 -{{toc/}}
13 13  
14 14  
15 15  
... ... @@ -19,34 +19,29 @@
19 19  
20 20  == 1.1 ​ What is N95S31B NB-IoT Sensor Node ==
21 21  
22 -
23 23  (((
22 +
23 +
24 24  The Dragino N95S31B is a (% style="color:blue" %)**NB-IoT Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via NB-IoT network*.
25 -)))
26 26  
27 -(((
28 28  The temperature & humidity sensor used in N95S31B is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing **(%%)for long term use.
29 -)))
30 30  
31 -(((
32 32  N95S31B supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP and CoAP**(%%) for different application requirement.
33 -)))
34 34  
35 -(((
36 36  N95S31B is powered by(% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to several years. (Real-world battery life depends on the use environment, update period. Please check related Power Analyze report).
37 -)))
38 38  
39 -(((
32 +
40 40  ~* make sure you have NB-IoT coverage locally.
34 +
35 +
41 41  )))
42 42  
43 -
44 44  [[image:1657348284168-431.png]]
45 45  
46 46  
41 +
47 47  == 1.2 ​ Features ==
48 48  
49 -
50 50  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
51 51  * Monitor Temperature & Humidity via SHT31
52 52  * AT Commands to change parameters
... ... @@ -60,6 +60,7 @@
60 60  
61 61  
62 62  
57 +
63 63  == 1.3  Specification ==
64 64  
65 65  
... ... @@ -70,15 +70,16 @@
70 70  
71 71  (% style="color:#037691" %)**NB-IoT Spec:**
72 72  
73 -* B1 @H-FDD: 2100MHz
74 -* B3 @H-FDD: 1800MHz
75 -* B8 @H-FDD: 900MHz
76 -* B5 @H-FDD: 850MHz
77 -* B20 @H-FDD: 800MHz
78 -* B28 @H-FDD: 700MHz
68 +* - B1 @H-FDD: 2100MHz
69 +* - B3 @H-FDD: 1800MHz
70 +* - B8 @H-FDD: 900MHz
71 +* - B5 @H-FDD: 850MHz
72 +* - B20 @H-FDD: 800MHz
73 +* - B28 @H-FDD: 700MHz
79 79  
80 80  (% style="color:#037691" %)**Battery:**
81 81  
77 +
82 82  * Li/SOCI2 un-chargeable battery
83 83  * Capacity: 8500mAh
84 84  * Self Discharge: <1% / Year @ 25°C
... ... @@ -87,9 +87,9 @@
87 87  
88 88  
89 89  
86 +
90 90  == ​1.4  Applications ==
91 91  
92 -
93 93  * Smart Buildings & Home Automation
94 94  * Logistics and Supply Chain Management
95 95  * Smart Metering
... ... @@ -101,49 +101,41 @@
101 101  ​
102 102  
103 103  
104 -== 1.5  Pin Definitions & Switch ==
100 +== 1.5  Pin Definitions ==
105 105  
106 -
107 107  N95S31B use the mother board from NBSN95 which as below.
108 108  
109 -
110 110  [[image:image-20220709144723-1.png]]
111 111  
112 112  
113 113  === 1.5.1 Jumper JP2 ===
114 114  
115 -
116 116  Power on Device when put this jumper.
117 117  
118 118  
112 +
119 119  === 1.5.2 BOOT MODE / SW1 ===
120 120  
115 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
121 121  
122 -(((
123 -**1) ISP: ** upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
124 -)))
117 +2) Flash: work mode, device starts to work and send out console output for further debug
125 125  
126 -(((
127 -**2) Flash:**  work mode, device starts to work and send out console output for further debug
128 -)))
129 129  
130 130  
131 131  === 1.5.3 Reset Button ===
132 132  
133 -
134 134  Press to reboot the device.
135 135  
136 136  
126 +
137 137  === 1.5.4 LED ===
138 138  
139 -
140 140  It will flash:
141 141  
142 -1.  When boot the device in flash mode
131 +1. When boot the device in flash mode
132 +1. Send an uplink packet
143 143  
144 -2.  Send an uplink packet
145 145  
146 -
147 147  = 2.  Use N95S31B to communicate with IoT Server =
148 148  
149 149  == 2.1  How it works ==
... ... @@ -162,14 +162,16 @@
162 162  
163 163  )))
164 164  
165 -[[image:1657520100595-569.png]]
153 +[[image:1657350248151-650.png]]
166 166  
167 167  (((
168 168  
169 169  )))
170 170  
159 +
171 171  == 2.2 ​ Configure the N95S31B ==
172 172  
162 +
173 173  === 2.2.1  Power On N95S31B ===
174 174  
175 175  
... ... @@ -176,48 +176,26 @@
176 176  [[image:image-20220709150546-2.png]]
177 177  
178 178  
179 -=== 2.2.2 Test Requirement ===
169 +=== 2.2.1 Test Requirement ===
180 180  
181 181  
182 -(((
183 183  To use N95S31B in your city, make sure meet below requirements:
184 -)))
185 185  
186 -* (((
187 -Your local operator has already distributed a NB-IoT Network there.
188 -)))
189 -* (((
190 -The local NB-IoT network used the band that N95S31B supports.
191 -)))
192 -* (((
193 -Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
194 -)))
174 +* Your local operator has already distributed a NB-IoT Network there.
175 +* The local NB-IoT network used the band that N95S31B supports.
176 +* Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
195 195  
196 -(((
197 197  Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.
198 -)))
199 199  
200 -(((
201 201  N95S31B supports different communication protocol such as :
202 -)))
203 203  
204 204  (((
205 -* (((
206 -CoAP  ((% style="color:red" %)120.24.4.116:5683(%%))
207 -)))
208 -* (((
209 -raw UDP  ((% style="color:red" %)120.24.4.116:5601(%%))
210 -)))
211 -* (((
212 -MQTT  ((% style="color:red" %)120.24.4.116:1883(%%))
213 -)))
214 -* (((
215 -TCP  ((% style="color:red" %)120.24.4.116:5600(%%))
216 -)))
183 +* CoAP  ((% style="color:red" %)120.24.4.116:5683(%%))
184 +* raw UDP  ((% style="color:red" %)120.24.4.116:5601(%%))
185 +* MQTT  ((% style="color:red" %)120.24.4.116:1883(%%))
186 +* TCP  ((% style="color:red" %)120.24.4.116:5600(%%))
217 217  
218 -(((
219 219  We will show how to use with each protocol. The IP addresses above are our test server. User need to change to point their corresponding server.
220 -)))
221 221  
222 222  
223 223  )))
... ... @@ -225,9 +225,9 @@
225 225  [[image:1657350625843-586.png]]
226 226  
227 227  
196 +
228 228  === 2.2.3  Insert SIM card ===
229 229  
230 -
231 231  (((
232 232  Insert the NB-IoT Card get from your provider.
233 233  )))
... ... @@ -240,29 +240,26 @@
240 240  [[image:1657351240556-536.png]]
241 241  
242 242  
211 +
243 243  === 2.2.4  Connect USB – TTL to N95S31B to configure it ===
244 244  
245 -
246 246  (((
247 247  (((
248 248  User need to configure N95S31B via serial port to set the (% style="color:blue" %)**Server Address** / **Uplink Topic** (%%)to define where and how-to uplink packets. N95S31B support AT Commands, user can use a USB to TTL adapter to connect to N95S31B and use AT Commands to configure it, as below.
249 -
250 -
251 251  )))
252 252  )))
253 253  
254 254  [[image:1657351312545-300.png]]
255 255  
222 +**Connection:**
256 256  
257 -(% style="color:blue" %)**Connection:**
224 + (% style="background-color:yellow" %)USB TTL GND <~-~-~-~-> GND
258 258  
259 - (% style="background-color:yellow" %)**USB TTL GND <~-~-~-~-> GND**
226 + (% style="background-color:yellow" %)USB TTL TXD <~-~-~-~-> UART_RXD
260 260  
261 -**~ (% style="background-color:yellow" %)USB TTL TXD <~-~-~-~-> UART_RXD(%%)**
228 + (% style="background-color:yellow" %)USB TTL RXD <~-~-~-~-> UART_TXD
262 262  
263 -**~ (% style="background-color:yellow" %)USB TTL RXD <~-~-~-~-> UART_TXD(%%)**
264 264  
265 -
266 266  In the PC, use below serial tool settings:
267 267  
268 268  * Baud:  (% style="color:green" %)**9600**
... ... @@ -277,18 +277,17 @@
277 277  
278 278  [[image:1657329814315-101.png]]
279 279  
280 -
281 281  (((
282 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)**[[https:~~/~~/www.dropbox.com/sh/mlpd6l05bogvaf6/AABwAJLMttqG7i~~-~~-AyZcQkoua?dl=0>>https://www.dropbox.com/sh/mlpd6l05bogvaf6/AABwAJLMttqG7i--AyZcQkoua?dl=0]]**
246 +(% style="color:red" %)Note: the valid AT Commands can be found at:  (%%)[[https:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/N95S31B/>>url:https://www.dragino.com/downloads/index.php?dir=NB-IoT/N95S31B/]]
283 283  )))
284 284  
285 285  
250 +
286 286  === 2.2.5  Use CoAP protocol to uplink data ===
287 287  
253 +(% style="color:red" %)Note: if you don't have CoAP server, you can refer this link to set up one: (%%)[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/>>http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
288 288  
289 -(% style="color:red" %)**Note: if you don't have CoAP server, you can refer this link to set up one: **(%%)**[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/>>http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]**
290 290  
291 -
292 292  (((
293 293  **Use below commands:**
294 294  )))
... ... @@ -297,10 +297,10 @@
297 297  (% style="color:blue" %)**AT+PRO=1**  (%%) ~/~/ Set to use CoAP protocol to uplink
298 298  )))
299 299  * (((
300 -(% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%)~/~/ to set CoAP server address and port
264 +(% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%)~/~/ to set CoAP server address and port
301 301  )))
302 302  * (((
303 -(% style="color:blue" %)**AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** (%%) ~/~/  Set COAP resource path
267 +(% style="color:blue" %)**AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** (%%) ~/~/Set COAP resource path
304 304  )))
305 305  
306 306  (((
... ... @@ -319,6 +319,7 @@
319 319  [[image:1657352185396-303.png]]
320 320  
321 321  
286 +
322 322  === 2.2.6  Use UDP protocol to uplink data(Default protocol) ===
323 323  
324 324  
... ... @@ -332,18 +332,18 @@
332 332  [[image:1657352403317-397.png]]
333 333  
334 334  
300 +
335 335  === 2.2.7  Use MQTT protocol to uplink data ===
336 336  
337 -
338 338  N95S31B supports only plain MQTT now it doesn't support TLS and other related encryption.
339 339  
340 -* (% style="color:blue" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
341 -* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
342 -* (% style="color:blue" %)**AT+CLIENT=CLIENT       ** (%%)~/~/  Set up the CLIENT of MQTT
343 -* (% style="color:blue" %)**AT+UNAME=UNAME                                **(%%)~/~/  Set the username of MQTT
344 -* (% style="color:blue" %)**AT+PWD=PWD                                         **(%%)~/~/  Set the password of MQTT
345 -* (% style="color:blue" %)**AT+PUBTOPIC=f9527                               **(%%)~/~/  Set the sending topic of MQTT
346 -* (% style="color:blue" %)**AT+SUBTOPIC=Ns9527          **(%%) ~/~/  Set the subscription topic of MQTT
305 +* (% style="color:blue" %)**AT+PRO=3   ** (%%) ~/~/Set to use MQTT protocol to uplink
306 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/Set MQTT server address and port
307 +* (% style="color:blue" %)**AT+CLIENT=CLIENT       ** (%%)~/~/Set up the CLIENT of MQTT
308 +* (% style="color:blue" %)**AT+UNAME=UNAME                                **(%%)~/~/Set the username of MQTT
309 +* (% style="color:blue" %)**AT+PWD=PWD                                         **(%%)~/~/Set the password of MQTT
310 +* (% style="color:blue" %)**AT+PUBTOPIC=f9527                               **(%%)~/~/Set the sending topic of MQTT
311 +* (% style="color:blue" %)**AT+SUBTOPIC=Ns9527          **(%%) ~/~/Set the subscription topic of MQTT
347 347  
348 348  [[image:1657352634421-276.png]]
349 349  
... ... @@ -350,19 +350,19 @@
350 350  
351 351  [[image:1657352645687-385.png]]
352 352  
353 -
354 354  (((
355 355  To save battery life, N95S31B will establish a subscription before each uplink and close the subscription 3 seconds after uplink successful. Any downlink commands from server will only arrive during the subscription period.
356 356  )))
357 357  
322 +
358 358  (((
359 359  MQTT protocol has a much high-power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
360 360  )))
361 361  
362 362  
328 +
363 363  === 2.2.8  Use TCP protocol to uplink data ===
364 364  
365 -
366 366  This feature is supported since firmware version v110
367 367  
368 368  * (% style="color:blue" %)**AT+PRO=4   ** (%%) ~/~/ Set to use TCP protocol to uplink
... ... @@ -374,9 +374,9 @@
374 374  [[image:1657352914475-252.png]]
375 375  
376 376  
342 +
377 377  === 2.2.9  Change Update Interval ===
378 378  
379 -
380 380  User can use below command to change the (% style="color:green" %)**uplink interval**.
381 381  
382 382  * (% style="color:blue" %)**AT+TDC=600      ** (%%)~/~/ Set Update Interval to 600s
... ... @@ -385,99 +385,58 @@
385 385  
386 386  )))
387 387  
388 -(((
389 -(% style="color:red" %)**NOTE: Since firmware version is v1.2:**
390 -)))
391 391  
392 -(((
393 -(% style="color:red" %)**By default, the device will send an uplink message every 2 hours. Each Uplink Include 8 set of records in this 2 hour (15 minute interval / record).**
394 -)))
395 395  
396 -
397 397  == 2.3  Uplink Payload ==
398 398  
399 399  
400 -(((
401 -N95S31B has different working modes for the connections of different types of sensors. This section describes these modes. User can use the AT Command (% style="color:blue" %)**AT+MOD**(%%) to set NBSN95 to different working modes.
402 -)))
358 +NBSN95 has different working mode for the connections of different type of sensors. This section describes these modes. User can use the AT Command (% style="color:blue" %)**AT+MOD**(%%) to set NBSN95 to different working modes.
403 403  
404 404  
405 -(((
406 406  For example:
407 -)))
408 408  
409 -(((
410 - (% style="color:blue" %)**AT+CFGMOD=2 ** (%%)~/~/  will set the N95S31B to work in MOD=2 distance mode which target to measure distance via Ultrasonic Sensor.
411 -)))
363 + (% style="color:blue" %)**AT+CFGMOD=2 ** (%%)~/~/will set the NBSN95 to work in MOD=2 distance mode which target to measure distance via Ultrasonic Sensor.
412 412  
413 413  
414 -(((
415 415  The uplink payloads are composed in  ASCII String. For example:
416 -)))
417 417  
418 -(((
419 419  0a cd 00 ed 0a cc 00 00 ef 02 d2 1d (total 24 ASCII Chars) . Representative the actually payload:
420 -)))
421 421  
422 -(((
423 423  0x 0a cd 00 ed 0a cc 00 00 ef 02 d2 1d Total 12 bytes
424 -)))
425 425  
426 426  
427 -(((
428 428  (% style="color:red" %)**NOTE:**
429 -)))
430 430  
431 431  (% style="color:red" %)
432 -1. (((
433 -**All modes share the same Payload Explanation from [[HERE>>||anchor="H2.3A0UplinkPayload"]].**
434 -)))
435 -1. (((
436 -**By default, the device will send an uplink message every 1 hour.**
376 +1. All modes share the same Payload Explanation from [[HERE>>path:#Payload_Explain]].
377 +1. By default, the device will send an uplink message every 1 hour.
437 437  
438 438  
439 -
440 -)))
441 441  
442 442  === 2.3.1  Payload Analyze ===
443 443  
444 -==== 2.3.1.1  Before Firmware v1.2 ====
445 -
446 -
447 447  N95S31B uplink payload includes in total 21 bytes
448 448  
449 449  
450 -(% border="1" style="background-color:#ffffcc; color:green; width:520px" %)
451 -|=(% style="width: 50px;" %)**Size(bytes)**|=(% style="width: 45px;" %)**6**|=(% style="width: 25px;" %)2|=(% style="width: 25px;" %)**2**|=(% style="width: 65px;" %)**1**|=(% style="width: 50px;" %)1|=(% style="width: 120px;" %)5|=(% style="width: 70px;" %)**2**|=(% style="width: 70px;" %)**2**
452 -|(% style="width:97px" %)**Value**|(% style="width:65px" %)[[Device ID>>||anchor="H2.3.2A0DeviceID"]]|(% style="width:50px" %)[[Ver>>||anchor="H2.3.3A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.3.4A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.3.5A0SignalStrength"]]|(% style="width:59px" %)MOD 0X01|(% style="width:162px" %)(((
453 -(((
386 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:440px" %)
387 +|=(% style="width: 60px;" %)(((
388 +**Size(bytes)**
389 +)))|=(% style="width: 60px;" %)**6**|=(% style="width: 35px;" %)2|=(% style="width: 35px;" %)**2**|=(% style="width: 80px;" %)**1**|=(% style="width: 80px;" %) |=(% style="width: 99px;" %) |=(% style="width: 77px;" %)**2**|=(% style="width: 60px;" %)**1**
390 +|(% style="width:97px" %)**Value**|(% style="width:83px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:41px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:123px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:123px" %)MOD 0X01|(% style="width:99px" %)(((
454 454  Reserve/ Same as NBSN95 CFGMOD=1
455 -)))
456 456  
457 -(((
458 458  No function here.
459 -)))
460 -)))|(% style="width:102px" %)(((
461 -(((
462 -[[Temperature >>||anchor="H2.3.6A0Temperature26Humidity"]]
463 -)))
394 +)))|(% style="width:77px" %)(((
395 +[[Temperature >>||anchor="H2.4.5A0Distance"]]
464 464  
465 -(((
466 466  By SHT31
467 -)))
468 -)))|(% style="width:81px" %)(((
469 -(((
470 -[[Humidity>>||anchor="H2.3.6A0Temperature26Humidity"]]
471 -)))
398 +)))|(% style="width:80px" %)(((
399 +[[Humidity>>||anchor="H2.4.6A0DigitalInterrupt"]]
472 472  
473 -(((
474 474  By SHT31
475 475  )))
476 -)))
477 477  
478 478  (((
479 -
480 -
481 481  (((
482 482  If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NB sensor uplink data.
483 483  )))
... ... @@ -487,89 +487,29 @@
487 487  [[image:1657354294009-643.png]]
488 488  
489 489  
490 -The payload is ASCII string, representative same HEX: (% style="background-color:yellow" %)**0x724031607457 006e 0ccd 1b 01 00dc000ccc 00e1 0186**
414 +The payload is ASCII string, representative same HEX: 0x724031607457006e0ccd1b0100dc000ccc00e10186 where:
491 491  
492 -**where:**
416 +* Device ID: 0x724031607457 = 724031607457
417 +* Version: 0x006e=110=1.1.0
493 493  
494 -* (% style="color:#037691" %)**Device ID:** (%%) 0x724031607457 = 724031607457
419 +* BAT: 0x0ccd = 3277 mV = 3.277V
420 +* Signal: 0x1b = 27
421 +* Model: 0x01 = 1
422 +* 0x00dc000ccc= reserve, ignore in N95S31B
423 +* Temperature by SHT31: 0x00e1 = 225 = 22.5 °C
424 +* Humidity by SHT31: 0x0186 = 390 = 39.0 %rh
495 495  
496 -* (% style="color:#037691" %)**Version: **(%%) 0x006e=110=1.1.0
497 -
498 -* (% style="color:#037691" %)**BAT:**   (%%) 0x0ccd = 3277 mV = 3.277V
499 -
500 -* (% style="color:#037691" %)**Signal:** (%%) 0x1b = 27
501 -
502 -* (% style="color:#037691" %)**Model:** (%%) 0x01 = 1
503 -
504 -* (% style="color:#037691" %)**0x00dc000ccc= reserve, ignore in N95S31B**
505 -
506 -* (% style="color:#037691" %)**Temperature by SHT31:** (%%) 0x00e1 = 225 = 22.5 °C
507 -
508 -* (% style="color:#037691" %)**Humidity by SHT31:**  (%%) 0x0186 = 390 = 39.0 %rh
509 -
510 510  (((
511 511  
428 +)))
512 512  
430 +(((
513 513  
514 514  )))
515 515  
516 -==== 2.3.1.2 Since Firmware v1.2 ====
517 517  
518 -
519 -In this mode, uplink payload includes 91 bytes in total by default.
520 -
521 -Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
522 -
523 -
524 -(% border="1" style="background-color:#ffffcc; color:green; width:520px" %)
525 -|=(% scope="row" style="width: 50px;" %)**Size(bytes)**|(% style="width:40px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:30px" %)**1**|(% style="width:20px" %)**1**|(% style="width:55px" %)**2**|(% style="width:35px" %)**1**|(% style="width:20px" %)**2**|(% style="width:40px" %)**2**|(% style="width:40px" %)**2**|(% style="width:30px" %)**4**|(% style="width:40px" %)**2**|(% style="width:40px" %)**2**|(% style="width:35px" %)**4**
526 -|=(% style="width: 95px;" %)**Value**|(% style="width:82px" %)Device ID|(% style="width:43px" %)Ver|(% style="width:47px" %)BAT|(% style="width:124px" %)Signal Strength|(% style="width:56px" %)MOD|(% style="width:109px" %)TemDS18B20|(% style="width:80px" %)Interrupt|(% style="width:51px" %)ADC|(% style="width:79px" %)SHTTEM|(% style="width:84px" %)SHTHUM|(% style="width:100px" %)Time stamp |(% style="width:76px" %)SHTTEM|(% style="width:81px" %)SHTHUM|(% style="width:121px" %)Time stamp .....
527 -
528 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the N95S31B uplink data.
529 -
530 -
531 -[[image:image-20220908154949-1.png]]
532 -
533 -
534 -The payload is ASCII string, representative same HEX:
535 -
536 -**0x (% style="color:red" %)__f868411056758782__ (% style="color:blue" %)__000c__ (% style="color:green" %)__0d0f__ (% style="color:#00b0f0" %)__0c__ (% style="color:#7030a0" %)__01__ (% style="color:#d60093" %)__0000__ (% style="color:#a14d07" %)__00__ __0030__ (% style="color:#0020b0" %)__0114__ (% style="color:#420042" %)__0231__ (% style="color:#663300" %)__63199d3c__ (%%)__0113023163199d12__ __0113023163199c5e__// //__0112023763199baa__ __0112023263199af6__// //__0111023b631999a7__ **
537 -
538 -**__0112023b631998f3__// //__011202426319983f__ __01110242631996eb__**
539 -
540 -**where:**
541 -
542 -* (% style="color:#037691" %)**Device ID:**(%%) f868411056758782 = f868411056758782
543 -
544 -* (% style="color:#037691" %)**Version:** (%%)0x000c=120=1.2
545 -
546 -* (% style="color:#037691" %)**BAT:**      (%%)0x0d0f = 3343 mV = 3.343V
547 -
548 -* (% style="color:#037691" %)**Singal:**(%%)  0x0c = 12
549 -
550 -* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
551 -
552 -* (% style="color:#037691" %)**TemDS18B20:**(%%)  0x0000= 0 = 0
553 -
554 -* (% style="color:#037691" %)**Interrupt:**  (%%)0x00= 0
555 -
556 -* (% style="color:#037691" %)**adc:**(%%)  0x0030= 48
557 -
558 -* (% style="color:#037691" %)**SHTTEM:**(%%)  0x0114= 276 = 27.6
559 -
560 -* (% style="color:#037691" %)**SHTHUM:**(%%)  0x0231 =561=56.1%
561 -
562 -* (% style="color:#037691" %)**Time stamp :  **(%%)0x63199d3c =1662342011  ([[Unix Epoch Time>>url:http://www.epochconverter.com/]])
563 -
564 -* (% style="color:#037691" %)**SHTTEM,SHTHUM,Time stamp :**(%%)  0113023163199d12
565 -
566 -* (% style="color:#037691" %)**8 sets of recorded data:**(%%)** **SHTTEM,SHTHUM,Time stamp : 0113023163199c5e, .......
567 -
568 -
569 -
570 570  === 2.3.2  Device ID ===
571 571  
572 -
573 573  (((
574 574  By default, the Device ID equal to the last 6 bytes of IMEI.
575 575  )))
... ... @@ -576,12 +576,10 @@
576 576  
577 577  (((
578 578  User can use (% style="color:blue" %)**AT+DEUI**(%%) to set Device ID
579 -
580 -
581 581  )))
582 582  
583 583  (((
584 -(% style="color:blue" %)**Example:**
446 +**Example:**
585 585  )))
586 586  
587 587  (((
... ... @@ -589,54 +589,30 @@
589 589  )))
590 590  
591 591  (((
592 -The Device ID is stored in a none-erase area, Upgrade the firmware or run (% style="color:blue" %)**AT+FDR**(%%) won't erase Device ID.
593 -
594 -
454 +The Device ID is stored in a none-erase area, Upgrade the firmware or run **AT+FDR** won't erase Device ID.
595 595  )))
596 596  
597 -(% style="color:red" %)**NOTE: When the firmware version is v1.2 and later firmware:**
598 598  
599 599  
600 -By default, the Device ID equal to the last 15 bits of IMEI.
601 -
602 -User can use ** (% style="color:blue" %)AT+DEUI(%%)** to set Device ID
603 -
604 -
605 -(% style="color:blue" %)**Example:**
606 -
607 -AT+DEUI=868411056754138
608 -
609 -
610 610  === 2.3.3  Version Info ===
611 611  
612 612  
613 -(((
614 614  These bytes include the hardware and software version.
615 -)))
616 616  
617 -(((
618 -**Higher byte:** Specify hardware version: always 0x00 for N95S31B
619 -)))
464 +Higher byte: Specify hardware version: always 0x00 for N95S31B
620 620  
621 -(((
622 -**Lower byte:** Specify the software version: 0x6E=110, means firmware version 110
623 -)))
466 +Lower byte: Specify the software version: 0x6E=110, means firmware version 110
624 624  
625 -(((
626 -
627 -)))
628 628  
629 -(((
630 630  For example: 0x00 6E: this device is N95S31B with firmware version 110.
631 -)))
632 632  
633 633  (((
634 634  
635 635  )))
636 636  
475 +
637 637  === 2.3.4  Battery Info ===
638 638  
639 -
640 640  (((
641 641  Ex1: 0x0B45 = 2885mV
642 642  )))
... ... @@ -646,9 +646,9 @@
646 646  )))
647 647  
648 648  
487 +
649 649  === 2.3.5  Signal Strength ===
650 650  
651 -
652 652  (((
653 653  NB-IoT Network signal Strength.
654 654  )))
... ... @@ -678,9 +678,9 @@
678 678  )))
679 679  
680 680  
519 +
681 681  === 2.3.6  Temperature & Humidity ===
682 682  
683 -
684 684  The device will be able to get the SHT31 temperature and humidity data now and upload to IoT Server.
685 685  
686 686  [[image:image-20220709161741-3.png]]
... ... @@ -696,10 +696,10 @@
696 696  Humidity:    Read:0295(H)=661(D)    Value:  661 / 10=66.1, So 66.1%
697 697  
698 698  
699 -== 2.4  Downlink Payload ==
700 700  
538 +== 2.5  Downlink Payload ==
701 701  
702 -By default, N95S31B prints the downlink payload to console port.
540 +By default, NDDS75 prints the downlink payload to console port.
703 703  
704 704  [[image:image-20220709100028-1.png]]
705 705  
... ... @@ -737,7 +737,7 @@
737 737  )))
738 738  
739 739  (((
740 -If payload = 0x04FF, it will reset the N95S31B
578 +If payload = 0x04FF, it will reset the NDDS75
741 741  )))
742 742  
743 743  
... ... @@ -748,76 +748,90 @@
748 748  )))
749 749  
750 750  
751 -== 2.5  Humidity and Temperature alarm function ==
752 752  
590 +== 2.5  ​Battery Analysis ==
753 753  
754 -**~ (% style="color:blue" %)➢ AT Command:(%%)**
592 +=== 2.5.1  ​Battery Type ===
755 755  
756 756  
757 -(% style="color:#037691" %)**AT+ SHHUM=min,max**
595 +(((
596 +The NDDS75 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
597 +)))
758 758  
599 +(((
600 +The battery is designed to last for several years depends on the actually use environment and update interval. 
601 +)))
759 759  
760 -² When min=0, and max≠0, Alarm higher than max
603 +(((
604 +The battery related documents as below:
605 +)))
761 761  
762 -² When min≠0, and max=0, Alarm lower than min
607 +* [[Battery Dimension>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
608 +* [[Lithium-Thionyl Chloride Battery datasheet>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
609 +* [[Lithium-ion Battery-Capacitor datasheet>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
763 763  
764 -² When min≠0 and max≠0, Alarm higher than max or lower than min
611 +(((
612 +[[image:image-20220709101450-2.png]]
613 +)))
765 765  
766 766  
767 - (% style="color:blue" %)**Example:**
768 768  
769 -AT+ SHHUM=50,80 ~/~/ Alarm when humidity lower than 50.
617 +=== 2.5.2  Power consumption Analyze ===
770 770  
619 +(((
620 +Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
621 +)))
771 771  
772 -(% style="color:#037691" %)**AT+ SHTEMP=min,max**
773 773  
774 -² When min=0, and max≠0, Alarm higher than max
624 +(((
625 +Instruction to use as below:
626 +)))
775 775  
776 -² When min≠0, and max=0, Alarm lower than min
628 +(((
629 +(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
630 +)))
777 777  
778 -² When min≠0 and max≠0, Alarm higher than max or lower than min
779 779  
633 +(((
634 +(% style="color:blue" %)**Step 2: **(%%) Open it and choose
635 +)))
780 780  
781 -**~ (% style="color:blue" %)Example:(%%)**
637 +* (((
638 +Product Model
639 +)))
640 +* (((
641 +Uplink Interval
642 +)))
643 +* (((
644 +Working Mode
645 +)))
782 782  
783 -AT+ SHTEMP=20,30 ~/~/ Alarm when temperature lower than 20.
647 +(((
648 +And the Life expectation in difference case will be shown on the right.
649 +)))
784 784  
651 +[[image:image-20220709110451-3.png]]
785 785  
786 -== 2.6 Set the number of data to be uploaded and the recording time ==
787 787  
788 788  
789 -**~ (% style="color:blue" %)➢ AT Command:(%%)**
655 +=== 2.5.3  ​Battery Note ===
790 790  
791 -* (% style="color:#037691" %)**AT+TR=900**     (%%)~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
792 -* (% style="color:#037691" %)**AT+NOUD=8**  (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
657 +(((
658 +The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
659 +)))
793 793  
794 - The diagram below explains the relationship between TR, NOUD, and TDC more clearly**:**
795 795  
796 -[[image:image-20221009001045-1.png||height="726" width="1009"]]
797 797  
663 +=== 2.5.4  Replace the battery ===
798 798  
799 -== 2.7 Read or Clear cached data ==
665 +(((
666 +The default battery pack of NDDS75 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
667 +)))
800 800  
801 801  
802 -**~ (% style="color:blue" %)➢ AT Command:(%%)**
803 803  
804 -* (% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
805 -* (% style="color:#037691" %)**AT+CDP=0** (%%) ~/~/  Clear cached data
806 -
807 -[[image:image-20220908163102-2.png]]
808 -
809 -
810 -== 2.8 Battery & Power Consumption ==
811 -
812 -
813 -N95S31B uses ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
814 -
815 -[[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
816 -
817 -
818 818  = 3. ​ Access NB-IoT Module =
819 819  
820 -
821 821  (((
822 822  Users can directly access the AT command set of the NB-IoT module.
823 823  )))
... ... @@ -824,21 +824,19 @@
824 824  
825 825  (((
826 826  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
827 -
828 -
829 829  )))
830 830  
831 831  [[image:1657333200519-600.png]]
832 832  
833 833  
684 +
834 834  = 4.  Using the AT Commands =
835 835  
836 836  == 4.1  Access AT Commands ==
837 837  
689 +See this link for detail: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NDDS75/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/]]
838 838  
839 -See NBSN95 AT Command in this link for detail:  [[https:~~/~~/www.dropbox.com/sh/jao1xt9kw5r3yq4/AAAMpJkZzExF2JLbRWxGoQ9Na?dl=0>>https://www.dropbox.com/sh/jao1xt9kw5r3yq4/AAAMpJkZzExF2JLbRWxGoQ9Na?dl=0]]
840 840  
841 -
842 842  AT+<CMD>?  : Help on <CMD>
843 843  
844 844  AT+<CMD>         : Run <CMD>
... ... @@ -878,24 +878,7 @@
878 878  
879 879  AT+SERVADDR  : Server Address
880 880  
881 -AT+TR      : Get or Set record time
882 882  
883 -AT+APN     : Get or set the APN
884 -
885 -AT+FBAND   : Get or Set whether to automatically modify the frequency band
886 -
887 -AT+DNSCFG  : Get or Set DNS Server
888 -
889 -AT+GETSENSORVALUE   : Returns the current sensor measurement
890 -
891 -AT+NOUD      : Get or Set the number of data to be uploaded
892 -
893 -AT+CDP     : Read or Clear cached data
894 -
895 -AT+SHTEMP: Get or Set alarm of temp
896 -
897 -AT+SHHUM: Get or Set alarm of moisture
898 -
899 899  (% style="color:#037691" %)**COAP Management**      
900 900  
901 901  AT+URI            : Resource parameters
... ... @@ -926,6 +926,7 @@
926 926  AT+PWORD  : Serial Access Password
927 927  
928 928  
762 +
929 929  = ​5.  FAQ =
930 930  
931 931  == 5.1 ​ How to Upgrade Firmware ==
... ... @@ -940,12 +940,11 @@
940 940  )))
941 941  
942 942  (((
943 -firmware：[[https:~~/~~/www.dropbox.com/sh/fr8w23rb951512i/AACSJeGQg-7ZjKhAI_Sn57H6a?dl=0>>https://www.dropbox.com/sh/fr8w23rb951512i/AACSJeGQg-7ZjKhAI_Sn57H6a?dl=0]]
944 -
945 -(% style="color:red" %)**Notice, N95S31B and LSN50v2 share the same mother board. They use the same connection and method to update.**
777 +(% style="color:red" %)Notice, NDDS75 and LDDS75 share the same mother board. They use the same connection and method to update.
946 946  )))
947 947  
948 948  
781 +
949 949  = 6.  Trouble Shooting =
950 950  
951 951  == 6.1  ​Connection problem when uploading firmware ==
... ... @@ -955,10 +955,14 @@
955 955  **Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
956 956  )))
957 957  
791 +(% class="wikigeneratedid" %)
792 +(((
793 +
794 +)))
958 958  
796 +
959 959  == 6.2  AT Command input doesn't work ==
960 960  
961 -
962 962  (((
963 963  In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
964 964  
... ... @@ -965,18 +965,18 @@
965 965  
966 966  )))
967 967  
968 -== 6.3 Not able to connect to NB-IoT network and keep showing "Signal Strength:99". ==
969 969  
970 -
971 -This means sensor is trying to join the NB-IoT network but fail. Please see this link for **//[[trouble shooting for signal strenght:99>>doc:Main.CSQ\:99,99.WebHome]]//**.
972 -
973 -
974 974  = 7. ​ Order Info =
975 975  
976 976  
977 -Part Number**:** (% style="color:#4f81bd" %)**N95S31B-YY**
809 +Part Number**:** (% style="color:#4f81bd" %)**NSDDS75**
978 978  
979 979  
812 +(% class="wikigeneratedid" %)
813 +(((
814 +
815 +)))
816 +
980 980  = 8.  Packing Info =
981 981  
982 982  (((
... ... @@ -984,7 +984,7 @@
984 984  
985 985  (% style="color:#037691" %)**Package Includes**:
986 986  
987 -* N95S31B NB-IoT Temperature and Humidity Sensor
824 +* NSE01 NB-IoT Distance Detect Sensor Node x 1
988 988  * External antenna x 1
989 989  )))
990 990  
... ... @@ -993,19 +993,21 @@
993 993  
994 994  (% style="color:#037691" %)**Dimension and weight**:
995 995  
833 +
996 996  * Device Size: 13.0 x 5 x 4.5 cm
997 997  * Device Weight: 150g
998 -* Package Size / pcs : 14.0 x 8x 5 cm
999 -* Weight / pcs : 180g
836 +* Package Size / pcs : 15 x 12x 5.5 cm
837 +* Weight / pcs : 220g
1000 1000  )))
1001 1001  
840 +(((
841 +
1002 1002  
1003 1003  
844 +
845 +)))
846 +
1004 1004  = 9.  Support =
1005 1005  
1006 -
1007 1007  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1008 -
1009 1009  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1010 -
1011 -
1657520100595-569.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -126.1 KB
Content
image-20220908154949-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -58.5 KB
Content
image-20220908163102-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -29.7 KB
Content
image-20221009001045-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -282.9 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0