Last modified by Mengting Qiu on 2024/04/02 16:44
<
From version < 130.16 >
edited by Xiaoling
on 2023/12/14 10:55
To version < 120.1 >
edited by David Huang
on 2022/09/08 15:49
>
Change comment: Uploaded new attachment "image-20220908154949-1.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.David
Content
... ... @@ -17,8 +17,11 @@
17 17  
18 18  = 1.  Introduction =
19 19  
20 +
20 20  == 1.1 ​ What is N95S31B NB-IoT Sensor Node ==
21 21  
23 +(((
24 +
22 22  
23 23  (((
24 24  The Dragino N95S31B is a (% style="color:blue" %)**NB-IoT Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via NB-IoT network*.
... ... @@ -37,13 +37,20 @@
37 37  )))
38 38  
39 39  (((
43 +
44 +)))
45 +
46 +(((
40 40  ~* make sure you have NB-IoT coverage locally.
41 41  )))
42 42  
50 +
51 +)))
43 43  
44 44  [[image:1657348284168-431.png]]
45 45  
46 46  
56 +
47 47  == 1.2 ​ Features ==
48 48  
49 49  
... ... @@ -59,6 +59,8 @@
59 59  * 8500mAh Battery for long term use
60 60  
61 61  
72 +
73 +
62 62  == 1.3  Specification ==
63 63  
64 64  
... ... @@ -67,15 +67,19 @@
67 67  * Supply Voltage: 2.1v ~~ 3.6v
68 68  * Operating Temperature: -40 ~~ 85°C
69 69  
82 +
83 +
70 70  (% style="color:#037691" %)**NB-IoT Spec:**
71 71  
72 -* B1 @H-FDD: 2100MHz
73 -* B3 @H-FDD: 1800MHz
74 -* B8 @H-FDD: 900MHz
75 -* B5 @H-FDD: 850MHz
76 -* B20 @H-FDD: 800MHz
77 -* B28 @H-FDD: 700MHz
86 +* - B1 @H-FDD: 2100MHz
87 +* - B3 @H-FDD: 1800MHz
88 +* - B8 @H-FDD: 900MHz
89 +* - B5 @H-FDD: 850MHz
90 +* - B20 @H-FDD: 800MHz
91 +* - B28 @H-FDD: 700MHz
78 78  
93 +
94 +
79 79  (% style="color:#037691" %)**Battery:**
80 80  
81 81  * Li/SOCI2 un-chargeable battery
... ... @@ -85,6 +85,8 @@
85 85  * Max boost current: 2A, 1 second
86 86  
87 87  
104 +
105 +
88 88  == ​1.4  Applications ==
89 89  
90 90  
... ... @@ -99,6 +99,7 @@
99 99  ​
100 100  
101 101  
120 +
102 102  == 1.5  Pin Definitions & Switch ==
103 103  
104 104  
... ... @@ -108,6 +108,7 @@
108 108  [[image:image-20220709144723-1.png]]
109 109  
110 110  
130 +
111 111  === 1.5.1 Jumper JP2 ===
112 112  
113 113  
... ... @@ -114,18 +114,20 @@
114 114  Power on Device when put this jumper.
115 115  
116 116  
137 +
117 117  === 1.5.2 BOOT MODE / SW1 ===
118 118  
119 119  
120 120  (((
121 -**1) ISP: ** upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
142 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
122 122  )))
123 123  
124 124  (((
125 -**2) Flash:**  work mode, device starts to work and send out console output for further debug
146 +2) Flash: work mode, device starts to work and send out console output for further debug
126 126  )))
127 127  
128 128  
150 +
129 129  === 1.5.3 Reset Button ===
130 130  
131 131  
... ... @@ -132,18 +132,21 @@
132 132  Press to reboot the device.
133 133  
134 134  
157 +
135 135  === 1.5.4 LED ===
136 136  
137 137  
138 138  It will flash:
139 139  
140 -1.  When boot the device in flash mode
163 +1. When boot the device in flash mode
164 +1. Send an uplink packet
141 141  
142 -2.  Send an uplink packet
143 143  
144 144  
168 +
145 145  = 2.  Use N95S31B to communicate with IoT Server =
146 146  
171 +
147 147  == 2.1  How it works ==
148 148  
149 149  
... ... @@ -166,8 +166,10 @@
166 166  
167 167  )))
168 168  
194 +
169 169  == 2.2 ​ Configure the N95S31B ==
170 170  
197 +
171 171  === 2.2.1  Power On N95S31B ===
172 172  
173 173  
... ... @@ -174,9 +174,10 @@
174 174  [[image:image-20220709150546-2.png]]
175 175  
176 176  
177 -=== 2.2.2 Test Requirement ===
178 178  
205 +=== 2.2.1 Test Requirement ===
179 179  
207 +
180 180  (((
181 181  To use N95S31B in your city, make sure meet below requirements:
182 182  )))
... ... @@ -223,6 +223,7 @@
223 223  [[image:1657350625843-586.png]]
224 224  
225 225  
254 +
226 226  === 2.2.3  Insert SIM card ===
227 227  
228 228  
... ... @@ -238,6 +238,7 @@
238 238  [[image:1657351240556-536.png]]
239 239  
240 240  
270 +
241 241  === 2.2.4  Connect USB – TTL to N95S31B to configure it ===
242 242  
243 243  
... ... @@ -252,13 +252,13 @@
252 252  [[image:1657351312545-300.png]]
253 253  
254 254  
255 -(% style="color:blue" %)**Connection:**
285 +**Connection:**
256 256  
257 - (% style="background-color:yellow" %)**USB TTL GND <~-~-~-~-> GND**
287 + (% style="background-color:yellow" %)USB TTL GND <~-~-~-~-> GND
258 258  
259 -**~ (% style="background-color:yellow" %)USB TTL TXD <~-~-~-~-> UART_RXD(%%)**
289 + (% style="background-color:yellow" %)USB TTL TXD <~-~-~-~-> UART_RXD
260 260  
261 -**~ (% style="background-color:yellow" %)USB TTL RXD <~-~-~-~-> UART_TXD(%%)**
291 + (% style="background-color:yellow" %)USB TTL RXD <~-~-~-~-> UART_TXD
262 262  
263 263  
264 264  In the PC, use below serial tool settings:
... ... @@ -281,6 +281,7 @@
281 281  )))
282 282  
283 283  
314 +
284 284  === 2.2.5  Use CoAP protocol to uplink data ===
285 285  
286 286  
... ... @@ -295,10 +295,10 @@
295 295  (% style="color:blue" %)**AT+PRO=1**  (%%) ~/~/ Set to use CoAP protocol to uplink
296 296  )))
297 297  * (((
298 -(% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%)~/~/ to set CoAP server address and port
329 +(% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%)~/~/ to set CoAP server address and port
299 299  )))
300 300  * (((
301 -(% style="color:blue" %)**AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** (%%) ~/~/  Set COAP resource path
332 +(% style="color:blue" %)**AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** (%%) ~/~/Set COAP resource path
302 302  )))
303 303  
304 304  (((
... ... @@ -317,6 +317,7 @@
317 317  [[image:1657352185396-303.png]]
318 318  
319 319  
351 +
320 320  === 2.2.6  Use UDP protocol to uplink data(Default protocol) ===
321 321  
322 322  
... ... @@ -324,6 +324,8 @@
324 324  * (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/ to set UDP server address and port
325 325  * (% style="color:blue" %)**AT+CFM=1       ** (%%) ~/~/ If the server does not respond, this command is unnecessary
326 326  
359 +
360 +
327 327  [[image:1657352391268-297.png]]
328 328  
329 329  
... ... @@ -330,19 +330,22 @@
330 330  [[image:1657352403317-397.png]]
331 331  
332 332  
367 +
333 333  === 2.2.7  Use MQTT protocol to uplink data ===
334 334  
335 335  
336 336  N95S31B supports only plain MQTT now it doesn't support TLS and other related encryption.
337 337  
338 -* (% style="color:blue" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
339 -* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
340 -* (% style="color:blue" %)**AT+CLIENT=CLIENT       ** (%%)~/~/  Set up the CLIENT of MQTT
341 -* (% style="color:blue" %)**AT+UNAME=UNAME                                **(%%)~/~/  Set the username of MQTT
342 -* (% style="color:blue" %)**AT+PWD=PWD                                         **(%%)~/~/  Set the password of MQTT
343 -* (% style="color:blue" %)**AT+PUBTOPIC=f9527                               **(%%)~/~/  Set the sending topic of MQTT
344 -* (% style="color:blue" %)**AT+SUBTOPIC=Ns9527          **(%%) ~/~/  Set the subscription topic of MQTT
373 +* (% style="color:blue" %)**AT+PRO=3   ** (%%) ~/~/Set to use MQTT protocol to uplink
374 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/Set MQTT server address and port
375 +* (% style="color:blue" %)**AT+CLIENT=CLIENT       ** (%%)~/~/Set up the CLIENT of MQTT
376 +* (% style="color:blue" %)**AT+UNAME=UNAME                                **(%%)~/~/Set the username of MQTT
377 +* (% style="color:blue" %)**AT+PWD=PWD                                         **(%%)~/~/Set the password of MQTT
378 +* (% style="color:blue" %)**AT+PUBTOPIC=f9527                               **(%%)~/~/Set the sending topic of MQTT
379 +* (% style="color:blue" %)**AT+SUBTOPIC=Ns9527          **(%%) ~/~/Set the subscription topic of MQTT
345 345  
381 +
382 +
346 346  [[image:1657352634421-276.png]]
347 347  
348 348  
... ... @@ -353,11 +353,13 @@
353 353  To save battery life, N95S31B will establish a subscription before each uplink and close the subscription 3 seconds after uplink successful. Any downlink commands from server will only arrive during the subscription period.
354 354  )))
355 355  
393 +
356 356  (((
357 357  MQTT protocol has a much high-power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
358 358  )))
359 359  
360 360  
399 +
361 361  === 2.2.8  Use TCP protocol to uplink data ===
362 362  
363 363  
... ... @@ -366,6 +366,8 @@
366 366  * (% style="color:blue" %)**AT+PRO=4   ** (%%) ~/~/ Set to use TCP protocol to uplink
367 367  * (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5600   **(%%) ~/~/ to set TCP server address and port
368 368  
408 +
409 +
369 369  [[image:1657352898400-901.png]]
370 370  
371 371  
... ... @@ -372,6 +372,7 @@
372 372  [[image:1657352914475-252.png]]
373 373  
374 374  
416 +
375 375  === 2.2.9  Change Update Interval ===
376 376  
377 377  
... ... @@ -383,20 +383,13 @@
383 383  
384 384  )))
385 385  
386 -(((
387 -(% style="color:red" %)**NOTE: Since firmware version is v1.2:**
388 -)))
389 389  
390 -(((
391 -(% style="color:red" %)**By default, the device will send an uplink message every 2 hours. Each Uplink Include 8 set of records in this 2 hour (15 minute interval / record).**
392 -)))
393 393  
394 -
395 395  == 2.3  Uplink Payload ==
396 396  
397 397  
398 398  (((
399 -N95S31B has different working modes for the connections of different types of sensors. This section describes these modes. User can use the AT Command (% style="color:blue" %)**AT+MOD**(%%) to set NBSN95 to different working modes.
434 +N95S31B has different working mode for the connections of different type of sensors. This section describes these modes. User can use the AT Command (% style="color:blue" %)**AT+MOD**(%%) to set NBSN95 to different working modes.
400 400  )))
401 401  
402 402  
... ... @@ -405,7 +405,7 @@
405 405  )))
406 406  
407 407  (((
408 - (% style="color:blue" %)**AT+CFGMOD=2 ** (%%)~/~/  will set the N95S31B to work in MOD=2 distance mode which target to measure distance via Ultrasonic Sensor.
443 + (% style="color:blue" %)**AT+CFGMOD=2 ** (%%)~/~/will set the N95S31B to work in MOD=2 distance mode which target to measure distance via Ultrasonic Sensor.
409 409  )))
410 410  
411 411  
... ... @@ -434,19 +434,21 @@
434 434  **By default, the device will send an uplink message every 1 hour.**
435 435  
436 436  
472 +
437 437  
438 438  )))
439 439  
440 440  === 2.3.1  Payload Analyze ===
441 441  
442 -==== 2.3.1.1  Before Firmware v1.2 ====
443 443  
479 +N95S31B uplink payload includes in total 21 bytes
444 444  
445 -N95S31B uplink payload includes in total 21 bytes.
446 446  
447 -(% border="1" style="background-color:#f2f2f2; width:520px" %)
448 -|=(% style="width: 50px;background-color:#D9E2F3" %)**Size(bytes)**|=(% style="width: 45px;background-color:#D9E2F3" %)**6**|=(% style="width: 25px;background-color:#D9E2F3" %)2|=(% style="width: 25px;background-color:#D9E2F3" %)**2**|=(% style="width: 65px;background-color:#D9E2F3" %)**1**|=(% style="width: 50px;background-color:#D9E2F3" %)1|=(% style="width: 120px;background-color:#D9E2F3" %)5|=(% style="width: 70px;background-color:#D9E2F3" %)**2**|=(% style="width: 70px;background-color:#D9E2F3" %)**2**
449 -|(% style="width:97px" %)**Value**|(% style="width:65px" %)[[Device ID>>||anchor="H2.3.2A0DeviceID"]]|(% style="width:50px" %)[[Ver>>||anchor="H2.3.3A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.3.4A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.3.5A0SignalStrength"]]|(% style="width:59px" %)MOD 0X01|(% style="width:162px" %)(((
482 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:520px" %)
483 +|=(% style="width: 60px;" %)(((
484 +**Size(bytes)**
485 +)))|=(% style="width: 50px;" %)**6**|=(% style="width: 25px;" %)2|=(% style="width: 25px;" %)**2**|=(% style="width: 70px;" %)**1**|=(% style="width: 55px;" %)1|=(% style="width: 115px;" %)5|=(% style="width: 60px;" %)**2**|=(% style="width: 60px;" %)**2**
486 +|(% style="width:97px" %)**Value**|(% style="width:83px" %)[[Device ID>>||anchor="H2.3.2A0DeviceID"]]|(% style="width:41px" %)[[Ver>>||anchor="H2.3.3A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.3.4A0BatteryInfo"]]|(% style="width:123px" %)[[Signal Strength>>||anchor="H2.3.5A0SignalStrength"]]|(% style="width:123px" %)MOD 0X01|(% style="width:99px" %)(((
450 450  (((
451 451  Reserve/ Same as NBSN95 CFGMOD=1
452 452  )))
... ... @@ -454,7 +454,7 @@
454 454  (((
455 455  No function here.
456 456  )))
457 -)))|(% style="width:102px" %)(((
494 +)))|(% style="width:77px" %)(((
458 458  (((
459 459  [[Temperature >>||anchor="H2.3.6A0Temperature26Humidity"]]
460 460  )))
... ... @@ -462,7 +462,7 @@
462 462  (((
463 463  By SHT31
464 464  )))
465 -)))|(% style="width:81px" %)(((
502 +)))|(% style="width:80px" %)(((
466 466  (((
467 467  [[Humidity>>||anchor="H2.3.6A0Temperature26Humidity"]]
468 468  )))
... ... @@ -484,84 +484,27 @@
484 484  [[image:1657354294009-643.png]]
485 485  
486 486  
487 -The payload is ASCII string, representative same HEX: (% style="background-color:yellow" %)**0x724031607457 006e 0ccd 1b 01 00dc000ccc 00e1 0186**
524 +The payload is ASCII string, representative same HEX: 0x724031607457006e0ccd1b0100dc000ccc00e10186 where:
488 488  
489 -**where:**
526 +* Device ID: 0x724031607457 = 724031607457
527 +* Version: 0x006e=110=1.1.0
490 490  
491 -* (% style="color:#037691" %)**Device ID:** (%%) 0x724031607457 = 724031607457
529 +* BAT: 0x0ccd = 3277 mV = 3.277V
530 +* Signal: 0x1b = 27
531 +* Model: 0x01 = 1
532 +* 0x00dc000ccc= reserve, ignore in N95S31B
533 +* Temperature by SHT31: 0x00e1 = 225 = 22.5 °C
534 +* Humidity by SHT31: 0x0186 = 390 = 39.0 %rh
492 492  
493 -* (% style="color:#037691" %)**Version: **(%%) 0x006e=110=1.1.0
494 -
495 -* (% style="color:#037691" %)**BAT:**   (%%) 0x0ccd = 3277 mV = 3.277V
496 -
497 -* (% style="color:#037691" %)**Signal:** (%%) 0x1b = 27
498 -
499 -* (% style="color:#037691" %)**Model:** (%%) 0x01 = 1
500 -
501 -* (% style="color:#037691" %)**0x00dc000ccc= reserve, ignore in N95S31B**
502 -
503 -* (% style="color:#037691" %)**Temperature by SHT31:** (%%) 0x00e1 = 225 = 22.5 °C
504 -
505 -* (% style="color:#037691" %)**Humidity by SHT31:**  (%%) 0x0186 = 390 = 39.0 %rh
506 -
507 507  (((
508 508  
538 +)))
509 509  
540 +(((
510 510  
511 511  )))
512 512  
513 -==== 2.3.1.2 Since Firmware v1.2 ====
514 514  
515 -
516 -In this mode, uplink payload includes 91 bytes in total by default.
517 -
518 -Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
519 -
520 -(% border="1" style="background-color:#f2f2f2; width:520px" %)
521 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**8**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:30px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:55px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:35px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:30px" %)**4**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**4**
522 -|(% style="width:95px" %)**Value**|(% style="width:82px" %)Device ID|(% style="width:43px" %)Ver|(% style="width:47px" %)BAT|(% style="width:124px" %)Signal Strength|(% style="width:56px" %)MOD|(% style="width:109px" %)TemDS18B20|(% style="width:80px" %)Interrupt|(% style="width:51px" %)ADC|(% style="width:79px" %)SHTTEM|(% style="width:84px" %)SHTHUM|(% style="width:100px" %)Time stamp |(% style="width:76px" %)SHTTEM|(% style="width:81px" %)SHTHUM|(% style="width:121px" %)Time stamp .....
523 -
524 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the N95S31B uplink data.
525 -
526 -
527 -[[image:image-20220908154949-1.png]]
528 -
529 -
530 -The payload is ASCII string, representative same HEX:
531 -
532 -**0x (% style="color:red" %)__f868411056758782__ (% style="color:blue" %)__000c__ (% style="color:green" %)__0d0f__ (% style="color:#00b0f0" %)__0c__ (% style="color:#7030a0" %)__01__ (% style="color:#d60093" %)__0000__ (% style="color:#a14d07" %)__00__ __0030__ (% style="color:#0020b0" %)__0114__ (% style="color:#420042" %)__0231__ (% style="color:#663300" %)__63199d3c__ (%%)__0113023163199d12__ __0113023163199c5e__// //__0112023763199baa__ __0112023263199af6__// //__0111023b631999a7__ **
533 -
534 -**__0112023b631998f3__// //__011202426319983f__ __01110242631996eb__**
535 -
536 -**where:**
537 -
538 -* (% style="color:#037691" %)**Device ID:**(%%) f868411056758782 = f868411056758782
539 -
540 -* (% style="color:#037691" %)**Version:** (%%)0x000c=120=1.2
541 -
542 -* (% style="color:#037691" %)**BAT:**      (%%)0x0d0f = 3343 mV = 3.343V
543 -
544 -* (% style="color:#037691" %)**Singal:**(%%)  0x0c = 12
545 -
546 -* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
547 -
548 -* (% style="color:#037691" %)**TemDS18B20:**(%%)  0x0000= 0 = 0
549 -
550 -* (% style="color:#037691" %)**Interrupt:**  (%%)0x00= 0
551 -
552 -* (% style="color:#037691" %)**adc:**(%%)  0x0030= 48
553 -
554 -* (% style="color:#037691" %)**SHTTEM:**(%%)  0x0114= 276 = 27.6
555 -
556 -* (% style="color:#037691" %)**SHTHUM:**(%%)  0x0231 =561=56.1%
557 -
558 -* (% style="color:#037691" %)**Time stamp :  **(%%)0x63199d3c =1662342011  ([[Unix Epoch Time>>url:http://www.epochconverter.com/]])
559 -
560 -* (% style="color:#037691" %)**SHTTEM,SHTHUM,Time stamp :**(%%)  0113023163199d12
561 -
562 -* (% style="color:#037691" %)**8 sets of recorded data:**(%%)** **SHTTEM,SHTHUM,Time stamp : 0113023163199c5e, .......
563 -
564 -
565 565  === 2.3.2  Device ID ===
566 566  
567 567  
... ... @@ -571,12 +571,10 @@
571 571  
572 572  (((
573 573  User can use (% style="color:blue" %)**AT+DEUI**(%%) to set Device ID
574 -
575 -
576 576  )))
577 577  
578 578  (((
579 -(% style="color:blue" %)**Example:**
557 +**Example:**
580 580  )))
581 581  
582 582  (((
... ... @@ -584,24 +584,11 @@
584 584  )))
585 585  
586 586  (((
587 -The Device ID is stored in a none-erase area, Upgrade the firmware or run (% style="color:blue" %)**AT+FDR**(%%) won't erase Device ID.
588 -
589 -
565 +The Device ID is stored in a none-erase area, Upgrade the firmware or run **AT+FDR** won't erase Device ID.
590 590  )))
591 591  
592 -(% style="color:red" %)**NOTE: When the firmware version is v1.2 and later firmware:**
593 593  
594 594  
595 -By default, the Device ID equal to the last 15 bits of IMEI.
596 -
597 -User can use ** (% style="color:blue" %)AT+DEUI(%%)** to set Device ID
598 -
599 -
600 -(% style="color:blue" %)**Example:**
601 -
602 -AT+DEUI=868411056754138
603 -
604 -
605 605  === 2.3.3  Version Info ===
606 606  
607 607  
... ... @@ -610,11 +610,11 @@
610 610  )))
611 611  
612 612  (((
613 -**Higher byte:** Specify hardware version: always 0x00 for N95S31B
578 +Higher byte: Specify hardware version: always 0x00 for N95S31B
614 614  )))
615 615  
616 616  (((
617 -**Lower byte:** Specify the software version: 0x6E=110, means firmware version 110
582 +Lower byte: Specify the software version: 0x6E=110, means firmware version 110
618 618  )))
619 619  
620 620  (((
... ... @@ -629,6 +629,7 @@
629 629  
630 630  )))
631 631  
597 +
632 632  === 2.3.4  Battery Info ===
633 633  
634 634  
... ... @@ -641,6 +641,7 @@
641 641  )))
642 642  
643 643  
610 +
644 644  === 2.3.5  Signal Strength ===
645 645  
646 646  
... ... @@ -673,6 +673,7 @@
673 673  )))
674 674  
675 675  
643 +
676 676  === 2.3.6  Temperature & Humidity ===
677 677  
678 678  
... ... @@ -691,17 +691,15 @@
691 691  Humidity:    Read:0295(H)=661(D)    Value:  661 / 10=66.1, So 66.1%
692 692  
693 693  
662 +
694 694  == 2.4  Downlink Payload ==
695 695  
696 696  
697 697  By default, N95S31B prints the downlink payload to console port.
698 698  
699 -(% border="1" style="background-color:#f2f2f2; width:520px" %)
700 -|(% style="background-color:#d9e2f3; color:#0070c0; width:200px" %)**Downlink Control Type**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**FPort**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**Type Code**|(% style="background-color:#d9e2f3; color:#0070c0; width:170px" %)**Downlink payload size(bytes)**
701 -|(% style="width:204px" %)TDC(Transmit Time Interval)|(% style="width:80px" %)Any|(% style="width:94px" %)01|(% style="width:150px" %)4
702 -|(% style="width:204px" %)RESET|(% style="width:80px" %)Any|(% style="width:94px" %)04|(% style="width:150px" %)2
703 -|(% style="width:204px" %)INTMOD|(% style="width:80px" %)Any|(% style="width:94px" %)06|(% style="width:150px" %)4
668 +[[image:image-20220709100028-1.png]]
704 704  
670 +
705 705  (((
706 706  (% style="color:blue" %)**Examples:**
707 707  )))
... ... @@ -746,73 +746,70 @@
746 746  )))
747 747  
748 748  
749 -== 2.5  Humidity and Temperature alarm function ==
750 750  
716 +== 2.5  ​Battery Analysis ==
751 751  
752 -**~ (% style="color:blue" %)➢ AT Command:(%%)**
753 753  
719 +=== 2.5.1  ​Battery Type ===
754 754  
755 -(% style="color:#037691" %)**AT+ SHHUM=min,max**
756 756  
722 +(((
723 +The N95S31B battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
724 +)))
757 757  
758 -² When min=0, and max≠0, Alarm higher than max
726 +(((
727 +The battery is designed to last for several years depends on the actually use environment and update interval. 
728 +)))
759 759  
760 -² When min≠0, and max=0, Alarm lower than min
730 +(((
731 +The battery related documents as below:
732 +)))
761 761  
762 -² When min≠0 and max≠0, Alarm higher than max or lower than min
734 +* [[Battery Dimension>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
735 +* [[Lithium-Thionyl Chloride Battery datasheet>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
736 +* [[Lithium-ion Battery-Capacitor datasheet>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
763 763  
738 +(((
739 +[[image:image-20220709101450-2.png]]
740 +)))
764 764  
765 - (% style="color:blue" %)**Example:**
766 766  
767 -AT+ SHHUM=50,80 ~/~/ Alarm when humidity lower than 50.
768 768  
744 +=== 2.5.2  Power consumption Analyze ===
769 769  
770 -(% style="color:#037691" %)**AT+ SHTEMP=min,max**
771 771  
772 -² When min=0, and max≠0, Alarm higher than max
747 +(((
748 +The file **DRAGINO_N95S31B-Power-Analyzer.pdf** from [[https:~~/~~/www.dropbox.com/sh/mlpd6l05bogvaf6/AABwAJLMttqG7i~~-~~-AyZcQkoua?dl=0>>https://www.dropbox.com/sh/mlpd6l05bogvaf6/AABwAJLMttqG7i--AyZcQkoua?dl=0]] describes a detail measurement to analyze the power consumption in different case. User can use it for design guideline for their project.
749 +)))
773 773  
774 -² When min≠0, and max=0, Alarm lower than min
751 +(((
752 +
753 +)))
775 775  
776 -² When min≠0 and max≠0, Alarm higher than max or lower than min
777 777  
756 +=== 2.5.3  ​Battery Note ===
778 778  
779 -**~ (% style="color:blue" %)Example:(%%)**
780 780  
781 -AT+ SHTEMP=20,30 ~/~/ Alarm when temperature lower than 20.
759 +(((
760 +The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to uplink data, then the battery life may be decreased.
761 +)))
782 782  
783 783  
784 -== 2.6 Set the number of data to be uploaded and the recording time ==
785 785  
765 +=== 2.5.4  Replace the battery ===
786 786  
787 -**~ (% style="color:blue" %)➢ AT Command:(%%)**
788 788  
789 -* (% style="color:#037691" %)**AT+TR=900**     (%%)~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
790 -* (% style="color:#037691" %)**AT+NOUD=8**  (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
768 +(((
769 +You can change the battery in the N95S31B.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
770 +)))
791 791  
792 - The diagram below explains the relationship between TR, NOUD, and TDC more clearly**:**
793 793  
794 -[[image:image-20221009001045-1.png||height="726" width="1009"]]
773 +(((
774 +The default battery pack of N95S31B includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
775 +)))
795 795  
796 796  
797 -== 2.7 Read or Clear cached data ==
798 798  
799 -
800 -**~ (% style="color:blue" %)➢ AT Command:(%%)**
801 -
802 -* (% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
803 -* (% style="color:#037691" %)**AT+CDP=0** (%%) ~/~/  Clear cached data
804 -
805 -[[image:image-20220908163102-2.png]]
806 -
807 -
808 -== 2.8 Battery & Power Consumption ==
809 -
810 -
811 -N95S31B uses ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
812 -
813 -[[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
814 -
815 -
816 816  = 3. ​ Access NB-IoT Module =
817 817  
818 818  
... ... @@ -829,8 +829,10 @@
829 829  [[image:1657333200519-600.png]]
830 830  
831 831  
795 +
832 832  = 4.  Using the AT Commands =
833 833  
798 +
834 834  == 4.1  Access AT Commands ==
835 835  
836 836  
... ... @@ -876,24 +876,7 @@
876 876  
877 877  AT+SERVADDR  : Server Address
878 878  
879 -AT+TR      : Get or Set record time
880 880  
881 -AT+APN     : Get or set the APN
882 -
883 -AT+FBAND   : Get or Set whether to automatically modify the frequency band
884 -
885 -AT+DNSCFG  : Get or Set DNS Server
886 -
887 -AT+GETSENSORVALUE   : Returns the current sensor measurement
888 -
889 -AT+NOUD      : Get or Set the number of data to be uploaded
890 -
891 -AT+CDP     : Read or Clear cached data
892 -
893 -AT+SHTEMP: Get or Set alarm of temp
894 -
895 -AT+SHHUM: Get or Set alarm of moisture
896 -
897 897  (% style="color:#037691" %)**COAP Management**      
898 898  
899 899  AT+URI            : Resource parameters
... ... @@ -924,8 +924,10 @@
924 924  AT+PWORD  : Serial Access Password
925 925  
926 926  
875 +
927 927  = ​5.  FAQ =
928 928  
878 +
929 929  == 5.1 ​ How to Upgrade Firmware ==
930 930  
931 931  
... ... @@ -938,14 +938,18 @@
938 938  )))
939 939  
940 940  (((
941 -Firmware Download：[[https:~~/~~/www.dropbox.com/sh/fr8w23rb951512i/AACSJeGQg-7ZjKhAI_Sn57H6a?dl=0>>https://www.dropbox.com/sh/fr8w23rb951512i/AACSJeGQg-7ZjKhAI_Sn57H6a?dl=0]]
891 +
942 942  
893 +(((
943 943  (% style="color:red" %)**Notice, N95S31B and LSN50v2 share the same mother board. They use the same connection and method to update.**
944 944  )))
896 +)))
945 945  
946 946  
899 +
947 947  = 6.  Trouble Shooting =
948 948  
902 +
949 949  == 6.1  ​Connection problem when uploading firmware ==
950 950  
951 951  
... ... @@ -953,7 +953,12 @@
953 953  **Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
954 954  )))
955 955  
910 +(% class="wikigeneratedid" %)
911 +(((
912 +
913 +)))
956 956  
915 +
957 957  == 6.2  AT Command input doesn't work ==
958 958  
959 959  
... ... @@ -963,12 +963,7 @@
963 963  
964 964  )))
965 965  
966 -== 6.3 Not able to connect to NB-IoT network and keep showing "Signal Strength:99". ==
967 967  
968 -
969 -This means sensor is trying to join the NB-IoT network but fail. Please see this link for **//[[trouble shooting for signal strenght:99>>doc:Main.CSQ\:99,99.WebHome]]//**.
970 -
971 -
972 972  = 7. ​ Order Info =
973 973  
974 974  
... ... @@ -975,6 +975,11 @@
975 975  Part Number**:** (% style="color:#4f81bd" %)**N95S31B-YY**
976 976  
977 977  
932 +(% class="wikigeneratedid" %)
933 +(((
934 +
935 +)))
936 +
978 978  = 8.  Packing Info =
979 979  
980 980  (((
... ... @@ -997,13 +997,18 @@
997 997  * Weight / pcs : 180g
998 998  )))
999 999  
959 +(((
960 +
1000 1000  
1001 1001  
963 +
964 +)))
965 +
1002 1002  = 9.  Support =
1003 1003  
1004 1004  
1005 1005  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1006 -
1007 1007  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1008 1008  
972 +
1009 1009  
image-20220908163102-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -29.7 KB
Content
image-20221009001045-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -282.9 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0