Changes for page N95S31B -- NB-IoT Temperature & Humidity Sensor User Manual
Last modified by Mengting Qiu on 2024/04/02 16:44
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 3 removed)
Details
- Page properties
-
- Content
-
... ... @@ -17,35 +17,21 @@ 17 17 18 18 = 1. Introduction = 19 19 20 - 21 21 == 1.1 What is N95S31B NB-IoT Sensor Node == 22 22 23 23 ((( 24 24 25 25 26 -((( 27 27 The Dragino N95S31B is a (% style="color:blue" %)**NB-IoT Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via NB-IoT network*. 28 -))) 29 29 30 -((( 31 31 The temperature & humidity sensor used in N95S31B is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing **(%%)for long term use. 32 -))) 33 33 34 -((( 35 35 N95S31B supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP and CoAP**(%%) for different application requirement. 36 -))) 37 37 38 -((( 39 39 N95S31B is powered by(% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to several years. (Real-world battery life depends on the use environment, update period. Please check related Power Analyze report). 40 -))) 41 41 42 -((( 43 - 44 -))) 45 45 46 -((( 47 47 ~* make sure you have NB-IoT coverage locally. 48 -))) 49 49 50 50 51 51 ))) ... ... @@ -56,7 +56,6 @@ 56 56 57 57 == 1.2 Features == 58 58 59 - 60 60 * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD 61 61 * Monitor Temperature & Humidity via SHT31 62 62 * AT Commands to change parameters ... ... @@ -88,6 +88,7 @@ 88 88 89 89 (% style="color:#037691" %)**Battery:** 90 90 76 + 91 91 * Li/SOCI2 un-chargeable battery 92 92 * Capacity: 8500mAh 93 93 * Self Discharge: <1% / Year @ 25°C ... ... @@ -97,7 +97,6 @@ 97 97 98 98 == 1.4 Applications == 99 99 100 - 101 101 * Smart Buildings & Home Automation 102 102 * Logistics and Supply Chain Management 103 103 * Smart Metering ... ... @@ -109,21 +109,15 @@ 109 109 110 110 111 111 97 +== 1.5 Pin Definitions == 112 112 113 - 114 -== 1.5 Pin Definitions & Switch == 115 - 116 - 117 117 N95S31B use the mother board from NBSN95 which as below. 118 118 119 - 120 120 [[image:image-20220709144723-1.png]] 121 121 122 122 123 - 124 124 === 1.5.1 Jumper JP2 === 125 125 126 - 127 127 Power on Device when put this jumper. 128 128 129 129 ... ... @@ -130,20 +130,14 @@ 130 130 131 131 === 1.5.2 BOOT MODE / SW1 === 132 132 133 - 134 -((( 135 135 1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run. 136 -))) 137 137 138 -((( 139 139 2) Flash: work mode, device starts to work and send out console output for further debug 140 -))) 141 141 142 142 143 143 144 144 === 1.5.3 Reset Button === 145 145 146 - 147 147 Press to reboot the device. 148 148 149 149 ... ... @@ -150,16 +150,13 @@ 150 150 151 151 === 1.5.4 LED === 152 152 153 - 154 154 It will flash: 155 155 156 156 1. When boot the device in flash mode 157 157 1. Send an uplink packet 158 158 159 - 160 160 = 2. Use N95S31B to communicate with IoT Server = 161 161 162 - 163 163 == 2.1 How it works == 164 164 165 165 ... ... @@ -176,7 +176,7 @@ 176 176 177 177 ))) 178 178 179 -[[image:16575 20100595-569.png]]149 +[[image:1657350248151-650.png]] 180 180 181 181 ((( 182 182 ... ... @@ -192,49 +192,26 @@ 192 192 [[image:image-20220709150546-2.png]] 193 193 194 194 195 - 196 196 === 2.2.1 Test Requirement === 197 197 198 198 199 -((( 200 200 To use N95S31B in your city, make sure meet below requirements: 201 -))) 202 202 203 -* ((( 204 -Your local operator has already distributed a NB-IoT Network there. 205 -))) 206 -* ((( 207 -The local NB-IoT network used the band that N95S31B supports. 208 -))) 209 -* ((( 210 -Your operator is able to distribute the data received in their NB-IoT network to your IoT server. 211 -))) 170 +* Your local operator has already distributed a NB-IoT Network there. 171 +* The local NB-IoT network used the band that N95S31B supports. 172 +* Your operator is able to distribute the data received in their NB-IoT network to your IoT server. 212 212 213 -((( 214 214 Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8. 215 -))) 216 216 217 -((( 218 218 N95S31B supports different communication protocol such as : 219 -))) 220 220 221 221 ((( 222 -* ((( 223 -CoAP ((% style="color:red" %)120.24.4.116:5683(%%)) 224 -))) 225 -* ((( 226 -raw UDP ((% style="color:red" %)120.24.4.116:5601(%%)) 227 -))) 228 -* ((( 229 -MQTT ((% style="color:red" %)120.24.4.116:1883(%%)) 230 -))) 231 -* ((( 232 -TCP ((% style="color:red" %)120.24.4.116:5600(%%)) 233 -))) 179 +* CoAP ((% style="color:red" %)120.24.4.116:5683(%%)) 180 +* raw UDP ((% style="color:red" %)120.24.4.116:5601(%%)) 181 +* MQTT ((% style="color:red" %)120.24.4.116:1883(%%)) 182 +* TCP ((% style="color:red" %)120.24.4.116:5600(%%)) 234 234 235 -((( 236 236 We will show how to use with each protocol. The IP addresses above are our test server. User need to change to point their corresponding server. 237 -))) 238 238 239 239 240 240 ))) ... ... @@ -245,7 +245,6 @@ 245 245 246 246 === 2.2.3 Insert SIM card === 247 247 248 - 249 249 ((( 250 250 Insert the NB-IoT Card get from your provider. 251 251 ))) ... ... @@ -261,18 +261,14 @@ 261 261 262 262 === 2.2.4 Connect USB – TTL to N95S31B to configure it === 263 263 264 - 265 265 ((( 266 266 ((( 267 267 User need to configure N95S31B via serial port to set the (% style="color:blue" %)**Server Address** / **Uplink Topic** (%%)to define where and how-to uplink packets. N95S31B support AT Commands, user can use a USB to TTL adapter to connect to N95S31B and use AT Commands to configure it, as below. 268 - 269 - 270 270 ))) 271 271 ))) 272 272 273 273 [[image:1657351312545-300.png]] 274 274 275 - 276 276 **Connection:** 277 277 278 278 (% style="background-color:yellow" %)USB TTL GND <~-~-~-~-> GND ... ... @@ -296,9 +296,8 @@ 296 296 297 297 [[image:1657329814315-101.png]] 298 298 299 - 300 300 ((( 301 -(% style="color:red" %) **Note: the valid AT Commands can be found at:**(%%)**[[https:~~/~~/www.dropbox.com/sh/mlpd6l05bogvaf6/AABwAJLMttqG7i~~-~~-AyZcQkoua?dl=0>>https://www.dropbox.com/sh/mlpd6l05bogvaf6/AABwAJLMttqG7i--AyZcQkoua?dl=0]]**242 +(% style="color:red" %)Note: the valid AT Commands can be found at: (%%)[[https:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/N95S31B/>>url:https://www.dragino.com/downloads/index.php?dir=NB-IoT/N95S31B/]] 302 302 ))) 303 303 304 304 ... ... @@ -305,10 +305,9 @@ 305 305 306 306 === 2.2.5 Use CoAP protocol to uplink data === 307 307 249 +(% style="color:red" %)Note: if you don't have CoAP server, you can refer this link to set up one: (%%)[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/>>http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]] 308 308 309 -(% style="color:red" %)**Note: if you don't have CoAP server, you can refer this link to set up one: **(%%)**[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/>>http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]** 310 310 311 - 312 312 ((( 313 313 **Use below commands:** 314 314 ))) ... ... @@ -356,7 +356,6 @@ 356 356 357 357 === 2.2.7 Use MQTT protocol to uplink data === 358 358 359 - 360 360 N95S31B supports only plain MQTT now it doesn't support TLS and other related encryption. 361 361 362 362 * (% style="color:blue" %)**AT+PRO=3 ** (%%) ~/~/Set to use MQTT protocol to uplink ... ... @@ -372,7 +372,6 @@ 372 372 373 373 [[image:1657352645687-385.png]] 374 374 375 - 376 376 ((( 377 377 To save battery life, N95S31B will establish a subscription before each uplink and close the subscription 3 seconds after uplink successful. Any downlink commands from server will only arrive during the subscription period. 378 378 ))) ... ... @@ -386,7 +386,6 @@ 386 386 387 387 === 2.2.8 Use TCP protocol to uplink data === 388 388 389 - 390 390 This feature is supported since firmware version v110 391 391 392 392 * (% style="color:blue" %)**AT+PRO=4 ** (%%) ~/~/ Set to use TCP protocol to uplink ... ... @@ -401,7 +401,6 @@ 401 401 402 402 === 2.2.9 Change Update Interval === 403 403 404 - 405 405 User can use below command to change the (% style="color:green" %)**uplink interval**. 406 406 407 407 * (% style="color:blue" %)**AT+TDC=600 ** (%%)~/~/ Set Update Interval to 600s ... ... @@ -410,104 +410,56 @@ 410 410 411 411 ))) 412 412 413 -((( 414 -(% style="color:red" %)**NOTE: Since firmware version is v1.2:** 415 -))) 416 416 417 -((( 418 -(% style="color:red" %)**By default, the device will send an uplink message every 2 hours. Each Uplink Include 8 set of records in this 2 hour (15 minute interval / record).** 419 -))) 420 420 421 - 422 - 423 423 == 2.3 Uplink Payload == 424 424 425 425 426 -((( 427 -N95S31B has different working modes for the connections of different types of sensors. This section describes these modes. User can use the AT Command (% style="color:blue" %)**AT+MOD**(%%) to set NBSN95 to different working modes. 428 -))) 354 +NBSN95 has different working mode for the connections of different type of sensors. This section describes these modes. User can use the AT Command (% style="color:blue" %)**AT+MOD**(%%) to set NBSN95 to different working modes. 429 429 430 430 431 -((( 432 432 For example: 433 -))) 434 434 435 -((( 436 - (% style="color:blue" %)**AT+CFGMOD=2 ** (%%)~/~/will set the N95S31B to work in MOD=2 distance mode which target to measure distance via Ultrasonic Sensor. 437 -))) 359 + (% style="color:blue" %)**AT+CFGMOD=2 ** (%%)~/~/will set the NBSN95 to work in MOD=2 distance mode which target to measure distance via Ultrasonic Sensor. 438 438 439 439 440 -((( 441 441 The uplink payloads are composed in ASCII String. For example: 442 -))) 443 443 444 -((( 445 445 0a cd 00 ed 0a cc 00 00 ef 02 d2 1d (total 24 ASCII Chars) . Representative the actually payload: 446 -))) 447 447 448 -((( 449 449 0x 0a cd 00 ed 0a cc 00 00 ef 02 d2 1d Total 12 bytes 450 -))) 451 451 452 452 453 -((( 454 454 (% style="color:red" %)**NOTE:** 455 -))) 456 456 457 457 (% style="color:red" %) 458 -1. ((( 459 -**All modes share the same Payload Explanation from [[HERE>>||anchor="H2.3A0UplinkPayload"]].** 460 -))) 461 -1. ((( 462 -**By default, the device will send an uplink message every 1 hour.** 372 +1. All modes share the same Payload Explanation from [[HERE>>||anchor="H2.3A0UplinkPayload"]]. 373 +1. By default, the device will send an uplink message every 1 hour. 463 463 464 - 465 - 466 - 467 -))) 468 - 469 469 === 2.3.1 Payload Analyze === 470 470 471 - 472 -==== 2.3.1.1 Before Firmware v1.2 ==== 473 - 474 - 475 475 N95S31B uplink payload includes in total 21 bytes 476 476 477 477 478 -(% border=" 2" cellspacing="10" style="background-color:#ffffcc; color:green; width:760px" %)380 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:520px" %) 479 479 |=(% style="width: 60px;" %)((( 480 480 **Size(bytes)** 481 -)))|=(% style="width: 65px;" %)**6**|=(% style="width: 50px;" %)2|=(% style="width: 25px;" %)**2**|=(% style="width: 75px;" %)**1**|=(% style="width: 59px;" %)1|=(% style="width: 174px;" %)5|=(% style="width: 106px;" %)**2**|=(% style="width: 85px;" %)**2** 482 -|(% style="width:97px" %)**Value**|(% style="width:65px" %)[[Device ID>>||anchor="H2.3.2A0DeviceID"]]|(% style="width:50px" %)[[Ver>>||anchor="H2.3.3A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.3.4A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.3.5A0SignalStrength"]]|(% style="width:59px" %)MOD 0X01|(% style="width:174px" %)((( 483 -((( 383 +)))|=(% style="width: 45px;" %)**6**|=(% style="width: 25px;" %)2|=(% style="width: 25px;" %)**2**|=(% style="width: 70px;" %)**1**|=(% style="width: 50px;" %)1|=(% style="width: 120px;" %)5|=(% style="width: 60px;" %)**2**|=(% style="width: 60px;" %)**2** 384 +|(% style="width:97px" %)**Value**|(% style="width:83px" %)[[Device ID>>||anchor="H2.3.2A0DeviceID"]]|(% style="width:41px" %)[[Ver>>||anchor="H2.3.3A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.3.4A0BatteryInfo"]]|(% style="width:123px" %)[[Signal Strength>>||anchor="H2.3.5A0SignalStrength"]]|(% style="width:123px" %)MOD 0X01|(% style="width:99px" %)((( 484 484 Reserve/ Same as NBSN95 CFGMOD=1 485 -))) 486 486 487 -((( 488 488 No function here. 489 -))) 490 -)))|(% style="width:106px" %)((( 491 -((( 388 +)))|(% style="width:77px" %)((( 492 492 [[Temperature >>||anchor="H2.3.6A0Temperature26Humidity"]] 493 -))) 494 494 495 -((( 496 496 By SHT31 497 -))) 498 -)))|(% style="width:85px" %)((( 499 -((( 392 +)))|(% style="width:80px" %)((( 500 500 [[Humidity>>||anchor="H2.3.6A0Temperature26Humidity"]] 501 -))) 502 502 503 -((( 504 504 By SHT31 505 505 ))) 506 -))) 507 507 508 508 ((( 509 - 510 - 511 511 ((( 512 512 If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NB sensor uplink data. 513 513 ))) ... ... @@ -519,83 +519,27 @@ 519 519 520 520 The payload is ASCII string, representative same HEX: 0x724031607457006e0ccd1b0100dc000ccc00e10186 where: 521 521 522 -* Device ID: 0x724031607457 = 724031607457 410 +* Device ID: 0x724031607457 = 724031607457 411 +* Version: 0x006e=110=1.1.0 523 523 524 -* Version: 0x006e=110=1.1.0 525 - 526 -* BAT: 0x0ccd = 3277 mV = 3.277V 527 - 528 -* Signal: 0x1b = 27 529 - 530 -* Model: 0x01 = 1 531 - 413 +* BAT: 0x0ccd = 3277 mV = 3.277V 414 +* Signal: 0x1b = 27 415 +* Model: 0x01 = 1 532 532 * 0x00dc000ccc= reserve, ignore in N95S31B 417 +* Temperature by SHT31: 0x00e1 = 225 = 22.5 °C 418 +* Humidity by SHT31: 0x0186 = 390 = 39.0 %rh 533 533 534 -* Temperature by SHT31: 0x00e1 = 225 = 22.5 °C 535 - 536 -* Humidity by SHT31: 0x0186 = 390 = 39.0 %rh 537 - 538 538 ((( 539 539 422 +))) 540 540 541 - 424 +((( 542 542 543 543 ))) 544 544 545 -==== 2.3.1.2 Since Firmware v1.2 ==== 546 546 547 - 548 -In this mode, uplink payload includes 91 bytes in total by default. 549 - 550 -Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded. 551 - 552 - 553 -(% border="2" style="background-color:#ffffcc; color:green; width:1234px" %) 554 -|(% style="width:95px" %)**Size(bytes)**|(% style="width:82px" %)**8**|(% style="width:43px" %)**2**|(% style="width:47px" %)**2**|(% style="width:124px" %)**1**|(% style="width:56px" %)**1**|(% style="width:109px" %)**2**|(% style="width:80px" %)**1**|(% style="width:51px" %)**2**|(% style="width:79px" %)**2**|(% style="width:84px" %)**2**|(% style="width:100px" %)**4**|(% style="width:76px" %)**2**|(% style="width:81px" %)**2**|(% style="width:121px" %)**4** 555 -|(% style="width:95px" %)**Value**|(% style="width:82px" %)Device ID|(% style="width:43px" %)Ver|(% style="width:47px" %)BAT|(% style="width:124px" %)Signal Strength|(% style="width:56px" %)MOD|(% style="width:109px" %)TemDS18B20|(% style="width:80px" %)Interrupt|(% style="width:51px" %)ADC|(% style="width:79px" %)SHTTEM|(% style="width:84px" %)SHTHUM|(% style="width:100px" %)Time stamp |(% style="width:76px" %)SHTTEM|(% style="width:81px" %)SHTHUM|(% style="width:121px" %)Time stamp ..... 556 - 557 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the N95S31B uplink data. 558 - 559 - 560 -[[image:image-20220908154949-1.png]] 561 - 562 - 563 -The payload is ASCII string, representative same HEX: 564 - 565 -0x(% style="color:red" %)f868411056758782(% style="color:blue" %)000c(% style="color:green" %)0d0f(% style="color:red" %)0c(% style="color:blue" %)01(% style="color:green" %)0000(% style="color:red" %)00**//0030//**(% style="color:blue" %)**//0114//**(% style="color:red" %)**//0231//**(% style="color:green" %)**//63199d3c//**0113023163199d12//**0113023163199c5e**//0112023763199baa//**0112023263199af6**//0111023b631999a7//**0112023b631998f3**//011202426319983f//**01110242631996eb**//(%%) where: 566 - 567 -* (% style="color:red" %)Device ID: f868411056758782 = f868411056758782 568 - 569 -* (% style="color:blue" %)Version: 0x000c=120=1.2 570 - 571 -* (% style="color:green" %)BAT: 0x0d0f = 3343 mV = 3.343V 572 - 573 -* (% style="color:red" %)Singal: 0x0c = 12 574 - 575 -* (% style="color:blue" %)Mod: 0x01 = 1 576 - 577 -* TemDS18B20: 0x0000= 0 = 0 578 - 579 -* (% style="color:green" %)Interrupt: 0x00= 0 580 - 581 -* (% style="color:green" %)adc: 0x0030= 48 582 - 583 -* SHTTEM: 0x0114= 276 = 27.6 584 - 585 -* SHTHUM:0x0231 =561=56.1% 586 - 587 -* (% style="color:red" %)Time stamp : 0x6315537b =1662342011 ([[Unix Epoch Time>>url:http://www.epochconverter.com/]]) 588 - 589 -* (% style="color:red" %)SHTTEM,SHTHUM,Time stamp : 0113023163199d12 590 - 591 -* 8 sets of recorded data: SHTTEM,SHTHUM,Time stamp : //**0113023163199c5e**//,....... 592 - 593 - 594 - 595 - 596 596 === 2.3.2 Device ID === 597 597 598 - 599 599 ((( 600 600 By default, the Device ID equal to the last 6 bytes of IMEI. 601 601 ))) ... ... @@ -602,12 +602,10 @@ 602 602 603 603 ((( 604 604 User can use (% style="color:blue" %)**AT+DEUI**(%%) to set Device ID 605 - 606 - 607 607 ))) 608 608 609 609 ((( 610 -** (% style="color:blue" %)Example:**440 +**Example:** 611 611 ))) 612 612 613 613 ((( ... ... @@ -615,47 +615,22 @@ 615 615 ))) 616 616 617 617 ((( 618 -The Device ID is stored in a none-erase area, Upgrade the firmware or run ** (% style="color:blue" %)AT+FDR**(%%) won't erase Device ID. 619 - 620 - 448 +The Device ID is stored in a none-erase area, Upgrade the firmware or run **AT+FDR** won't erase Device ID. 621 621 ))) 622 622 623 -(% style="color:red" %)**NOTE: When the firmware version is v1.2 and later firmware:** 624 624 625 625 626 -By default, the Device ID equal to the last 15 bits of IMEI. 627 - 628 -User can use ** (% style="color:blue" %)AT+DEUI**(%%) to set Device ID 629 - 630 - 631 -** (% style="color:blue" %)Example:** 632 - 633 -AT+DEUI=868411056754138 634 - 635 - 636 - 637 637 === 2.3.3 Version Info === 638 638 639 639 640 -((( 641 641 These bytes include the hardware and software version. 642 -))) 643 643 644 -((( 645 645 Higher byte: Specify hardware version: always 0x00 for N95S31B 646 -))) 647 647 648 -((( 649 649 Lower byte: Specify the software version: 0x6E=110, means firmware version 110 650 -))) 651 651 652 -((( 653 - 654 -))) 655 655 656 -((( 657 657 For example: 0x00 6E: this device is N95S31B with firmware version 110. 658 -))) 659 659 660 660 ((( 661 661 ... ... @@ -664,7 +664,6 @@ 664 664 665 665 === 2.3.4 Battery Info === 666 666 667 - 668 668 ((( 669 669 Ex1: 0x0B45 = 2885mV 670 670 ))) ... ... @@ -677,7 +677,6 @@ 677 677 678 678 === 2.3.5 Signal Strength === 679 679 680 - 681 681 ((( 682 682 NB-IoT Network signal Strength. 683 683 ))) ... ... @@ -710,7 +710,6 @@ 710 710 711 711 === 2.3.6 Temperature & Humidity === 712 712 713 - 714 714 The device will be able to get the SHT31 temperature and humidity data now and upload to IoT Server. 715 715 716 716 [[image:image-20220709161741-3.png]] ... ... @@ -729,9 +729,8 @@ 729 729 730 730 == 2.4 Downlink Payload == 731 731 534 +By default, NDDS75 prints the downlink payload to console port. 732 732 733 -By default, N95S31B prints the downlink payload to console port. 734 - 735 735 [[image:image-20220709100028-1.png]] 736 736 737 737 ... ... @@ -768,7 +768,7 @@ 768 768 ))) 769 769 770 770 ((( 771 -If payload = 0x04FF, it will reset the 95S31B572 +If payload = 0x04FF, it will reset the NDDS75 772 772 ))) 773 773 774 774 ... ... @@ -779,59 +779,12 @@ 779 779 ))) 780 780 781 781 782 -== 2.5 Humidity and Temperature alarm function == 783 783 784 - ➢ATCommand:584 +== 2.5 Battery Analysis == 785 785 786 - AT+SHHUM=min,max586 +=== 2.5.1 Battery Type === 787 787 788 -² When min=0, and max≠0, Alarm higher than max 789 789 790 -² When min≠0, and max=0, Alarm lower than min 791 - 792 -² When min≠0 and max≠0, Alarm higher than max or lower than min 793 - 794 -Example: 795 - 796 -AT+ SHHUM=50,80 ~/~/ Alarm when humidity lower than 50. 797 - 798 - 799 -AT+ SHTEMP=min,max 800 - 801 -² When min=0, and max≠0, Alarm higher than max 802 - 803 -² When min≠0, and max=0, Alarm lower than min 804 - 805 -² When min≠0 and max≠0, Alarm higher than max or lower than min 806 - 807 -Example: 808 - 809 -AT+ SHTEMP=20,30 ~/~/ Alarm when temperature lower than 20. 810 - 811 -== 2.6 Set the number of data to be uploaded and the recording time == 812 - 813 -➢ AT Command: 814 - 815 -AT+TR=900 ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds) 816 - 817 -AT+NOUD=8 ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded. 818 - 819 -== 2.7 Read or Clear cached data == 820 - 821 -➢ AT Command: 822 - 823 -AT+CDP ~/~/ Read cached data 824 - 825 -[[image:image-20220908163102-2.png]] 826 - 827 -AT+CDP=0 ~/~/ Clear cached data 828 - 829 -== 2.8 Battery Analysis == 830 - 831 - 832 -=== 2.8.1 Battery Type === 833 - 834 - 835 835 ((( 836 836 The N95S31B battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter. 837 837 ))) ... ... @@ -854,11 +854,10 @@ 854 854 855 855 856 856 857 -=== 2. 8.2 Power consumption Analyze ===611 +=== 2.5.2 Power consumption Analyze === 858 858 859 - 860 860 ((( 861 -The file **DRAGINO_N95S31B-Power-Analyzer.pdf** from [[https:~~/~~/www.dro pbox.com/sh/mlpd6l05bogvaf6/AABwAJLMttqG7i~~-~~-AyZcQkoua?dl=0>>https://www.dropbox.com/sh/mlpd6l05bogvaf6/AABwAJLMttqG7i--AyZcQkoua?dl=0]]614 +The file **DRAGINO_N95S31B-Power-Analyzer.pdf** from [[https:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/N95S31B/>>url:https://www.dragino.com/downloads/index.php?dir=NB-IoT/N95S31B/]] describes a detail measurement to analyze the power consumption in different case. User can use it for design guideline for their project. 862 862 ))) 863 863 864 864 ((( ... ... @@ -866,9 +866,8 @@ 866 866 ))) 867 867 868 868 869 -=== 2. 8.3 Battery Note ===622 +=== 2.5.3 Battery Note === 870 870 871 - 872 872 ((( 873 873 The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to uplink data, then the battery life may be decreased. 874 874 ))) ... ... @@ -875,7 +875,7 @@ 875 875 876 876 877 877 878 -=== 2. 8.4 Replace the battery ===630 +=== 2.5.4 Replace the battery === 879 879 880 880 881 881 ((( ... ... @@ -891,7 +891,6 @@ 891 891 892 892 = 3. Access NB-IoT Module = 893 893 894 - 895 895 ((( 896 896 Users can directly access the AT command set of the NB-IoT module. 897 897 ))) ... ... @@ -898,8 +898,6 @@ 898 898 899 899 ((( 900 900 The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 901 - 902 - 903 903 ))) 904 904 905 905 [[image:1657333200519-600.png]] ... ... @@ -908,13 +908,11 @@ 908 908 909 909 = 4. Using the AT Commands = 910 910 911 - 912 912 == 4.1 Access AT Commands == 913 913 662 +See NBSN95 AT Command in this link for detail: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN95/>>url:https://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN95/]] 914 914 915 -See NBSN95 AT Command in this link for detail: [[https:~~/~~/www.dropbox.com/sh/jao1xt9kw5r3yq4/AAAMpJkZzExF2JLbRWxGoQ9Na?dl=0>>https://www.dropbox.com/sh/jao1xt9kw5r3yq4/AAAMpJkZzExF2JLbRWxGoQ9Na?dl=0]] 916 916 917 - 918 918 AT+<CMD>? : Help on <CMD> 919 919 920 920 AT+<CMD> : Run <CMD> ... ... @@ -954,24 +954,7 @@ 954 954 955 955 AT+SERVADDR : Server Address 956 956 957 -AT+TR : Get or Set record time 958 958 959 -AT+APN : Get or set the APN 960 - 961 -AT+FBAND : Get or Set whether to automatically modify the frequency band 962 - 963 -AT+DNSCFG : Get or Set DNS Server 964 - 965 -AT+GETSENSORVALUE : Returns the current sensor measurement 966 - 967 -AT+NOUD : Get or Set the number of data to be uploaded 968 - 969 -AT+CDP : Read or Clear cached data 970 - 971 -AT+SHTEMP: Get or Set alarm of temp 972 - 973 -AT+SHHUM: Get or Set alarm of moisture 974 - 975 975 (% style="color:#037691" %)**COAP Management** 976 976 977 977 AT+URI : Resource parameters ... ... @@ -1005,7 +1005,6 @@ 1005 1005 1006 1006 = 5. FAQ = 1007 1007 1008 - 1009 1009 == 5.1 How to Upgrade Firmware == 1010 1010 1011 1011 ... ... @@ -1020,16 +1020,13 @@ 1020 1020 ((( 1021 1021 1022 1022 1023 -((( 1024 -(% style="color:red" %)**Notice, N95S31B and LSN50v2 share the same mother board. They use the same connection and method to update.** 752 +(% style="color:red" %)Notice, N95S31B and LSN50v2 share the same mother board. They use the same connection and method to update. 1025 1025 ))) 1026 -))) 1027 1027 1028 1028 1029 1029 1030 1030 = 6. Trouble Shooting = 1031 1031 1032 - 1033 1033 == 6.1 Connection problem when uploading firmware == 1034 1034 1035 1035 ... ... @@ -1045,7 +1045,6 @@ 1045 1045 1046 1046 == 6.2 AT Command input doesn't work == 1047 1047 1048 - 1049 1049 ((( 1050 1050 In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string. 1051 1051 ... ... @@ -1095,6 +1095,5 @@ 1095 1095 1096 1096 = 9. Support = 1097 1097 1098 - 1099 1099 * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule. 1100 1100 * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
- 1657520100595-569.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -126.1 KB - Content
- image-20220908154949-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.David - Size
-
... ... @@ -1,1 +1,0 @@ 1 -58.5 KB - Content
- image-20220908163102-2.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.David - Size
-
... ... @@ -1,1 +1,0 @@ 1 -29.7 KB - Content