Last modified by Xiaoling on 2025/04/25 14:08
<
From version < 99.20 >
edited by Xiaoling
on 2023/05/23 18:09
To version < 98.9 >
edited by Xiaoling
on 2022/08/18 16:33
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -5,6 +5,14 @@
5 5  
6 6  
7 7  
8 +
9 +
10 +
11 +
12 +
13 +
14 +
15 +
8 8  **Table of Contents:**
9 9  
10 10  {{toc/}}
... ... @@ -14,12 +14,18 @@
14 14  
15 15  
16 16  
25 +
26 +
27 +
28 +
17 17  = 1. Introduction =
18 18  
31 +
19 19  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
20 20  
21 -
22 22  (((
35 +
36 +
23 23  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
24 24  )))
25 25  
... ... @@ -43,6 +43,8 @@
43 43  [[image:1654592435432-887.png]]
44 44  
45 45  
60 +
61 +
46 46  == ​1.2 Features ==
47 47  
48 48  
... ... @@ -62,6 +62,8 @@
62 62  
63 63  
64 64  
81 +
82 +
65 65  == 1.3 Probe Specification ==
66 66  
67 67  
... ... @@ -84,6 +84,8 @@
84 84  
85 85  
86 86  
105 +
106 +
87 87  == 1.4 ​Applications ==
88 88  
89 89  
... ... @@ -91,6 +91,7 @@
91 91  
92 92  
93 93  
114 +
94 94  == 1.5 Pin mapping and power on ==
95 95  
96 96  
... ... @@ -97,8 +97,10 @@
97 97  [[image:1654592472094-134.png]]
98 98  
99 99  
121 +
100 100  = 2. Configure LSPH01 to connect to LoRaWAN network =
101 101  
124 +
102 102  == 2.1 How it works ==
103 103  
104 104  
... ... @@ -111,6 +111,7 @@
111 111  )))
112 112  
113 113  
137 +
114 114  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
115 115  
116 116  
... ... @@ -138,10 +138,10 @@
138 138  Each LSPH01 is shipped with a sticker with the default device EUI as below:
139 139  )))
140 140  
141 -[[image:image-20230426084737-1.png||height="246" width="530"]](% style="display:none" %)
165 +[[image:image-20220607170145-1.jpeg]]
142 142  
143 -(% style="display:none" %) (%%)
144 144  
168 +
145 145  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
146 146  
147 147  
... ... @@ -186,6 +186,7 @@
186 186  [[image:1654592697690-910.png]]
187 187  
188 188  
213 +
189 189  == 2.3 ​Uplink Payload ==
190 190  
191 191  
... ... @@ -201,12 +201,14 @@
201 201  Normal uplink payload:
202 202  )))
203 203  
204 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:470px" %)
205 -|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
206 -**Size(bytes)**
207 -)))|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**1**
229 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
230 +|=(% style="width: 62.5px;" %)(((
231 +**Size (bytes)**
232 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
208 208  |(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
209 -[[Temperature (Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
234 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
235 +
236 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
210 210  )))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
211 211  [[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
212 212  )))|Reserve|(((
... ... @@ -216,6 +216,7 @@
216 216  [[image:1654592721645-318.png]]
217 217  
218 218  
246 +
219 219  === 2.3.1 Battery Info ===
220 220  
221 221  
... ... @@ -226,6 +226,7 @@
226 226  Ex2: 0x0B49 = 2889mV
227 227  
228 228  
257 +
229 229  === 2.3.2 DS18B20 Temperature sensor ===
230 230  
231 231  
... ... @@ -239,6 +239,7 @@
239 239  If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
240 240  
241 241  
271 +
242 242  === 2.3.3 Soil pH ===
243 243  
244 244  
... ... @@ -249,6 +249,7 @@
249 249  (% style="color:#037691" %)** 0x02B7(H) = 695(D) = 6.95pH**
250 250  
251 251  
282 +
252 252  === 2.3.4 Soil Temperature ===
253 253  
254 254  
... ... @@ -262,6 +262,7 @@
262 262  If payload is: **FF3FH** :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
263 263  
264 264  
296 +
265 265  === 2.3.5 Interrupt Pin ===
266 266  
267 267  
... ... @@ -275,6 +275,7 @@
275 275  0x01: Interrupt Uplink Packet.
276 276  
277 277  
310 +
278 278  === 2.3.6 Message Type ===
279 279  
280 280  
... ... @@ -287,8 +287,8 @@
287 287  )))
288 288  
289 289  
290 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:496px" %)
291 -|=(% style="width: 160px;background-color:#D9E2F3;color:#0070C0" %)**Message Type Code**|=(% style="width: 163px;background-color:#D9E2F3;color:#0070C0" %)**Description**|=(% style="width: 173px;background-color:#D9E2F3;color:#0070C0" %)**Payload**
323 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
324 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
292 292  |(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
293 293  |(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
294 294  |(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
... ... @@ -295,9 +295,10 @@
295 295  
296 296  
297 297  
298 -=== 2.3.7 Decode payload in The Things Network ===
299 299  
300 300  
333 +=== 2.3.7 Decode payload in The Things Network ===
334 +
301 301  While using TTN network, you can add the payload format to decode the payload.
302 302  
303 303  
... ... @@ -308,10 +308,11 @@
308 308  )))
309 309  
310 310  (((
311 -LSPH01 TTN Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
345 +LSPH01 TTN Payload Decoder:  [[https:~~/~~/www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0>>https://www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0]]
312 312  )))
313 313  
314 314  
349 +
315 315  == 2.4 Uplink Interval ==
316 316  
317 317  
... ... @@ -318,6 +318,7 @@
318 318  The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
319 319  
320 320  
356 +
321 321  == 2.5 ​Show Data in DataCake IoT Server ==
322 322  
323 323  
... ... @@ -351,6 +351,7 @@
351 351  [[image:1654592819047-535.png]]
352 352  
353 353  
390 +
354 354  [[image:1654592833877-762.png]]
355 355  
356 356  
... ... @@ -380,8 +380,10 @@
380 380  [[image:1654592917530-261.png]]
381 381  
382 382  
420 +
383 383  == 2.6 Installation and Maintain ==
384 384  
423 +
385 385  === 2.6.1 Before measurement ===
386 386  
387 387  
... ... @@ -392,6 +392,7 @@
392 392  )))
393 393  
394 394  
434 +
395 395  === 2.6.2 Measurement ===
396 396  
397 397  
... ... @@ -438,6 +438,7 @@
438 438  )))
439 439  
440 440  
481 +
441 441  === 2.6.3 Maintain Probe ===
442 442  
443 443  
... ... @@ -472,46 +472,28 @@
472 472  
473 473  (((
474 474  After stable, user can use below command to calibrate.
475 -
476 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:520px" %)
477 -|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**pH buffer solution**|(% style="background-color:#d9e2f3; color:#0070c0; width:150px" %)**AT Command to calibrate**|(% style="background-color:#d9e2f3; color:#0070c0; width:150px" %)**Downlink Command**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**Read Cal Value**
478 -|(% style="width:149px" %)4.00|(% style="width:197px" %)AT+PHCAL=4|(% style="width:206px" %)(((
479 -0x13 04
480 -Reply with Calibrate payload
481 -)))|(% style="width:136px" %)(((
482 -AT+PHCAL=?
483 -Example 41,61,91
484 484  )))
485 -|(% style="width:149px" %)6.86|(% style="width:197px" %)AT+PHCAL=6|(% style="width:206px" %)(((
486 -0x13 06
487 -Reply with Calibrate payload
488 -)))|(% style="width:136px" %)AT+PHCAL=?
489 -|(% style="width:149px" %)9.18|(% style="width:197px" %)AT+PHCAL=9|(% style="width:206px" %)(((
490 -0x13 09
491 -Reply with Calibrate payload
492 -)))|(% style="width:136px" %)AT+PHCAL=?
493 -|(% style="width:149px" %)Factory Default|(% style="width:197px" %)AT+PHCAL=15|(% style="width:206px" %)(((
494 -0x13 15
495 -Reply with Calibrate payload
496 -)))|(% style="width:136px" %)(((
497 -AT+PHCAL=?
498 -Example 151
499 -)))
500 -)))
501 501  
518 +[[image:image-20220607171149-4.png]]
502 502  
520 +
503 503  (% style="color:#037691" %)**Calibration Payload**
504 504  
505 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
506 -|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
507 -**Size(bytes)**
508 -)))|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**7**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**
509 -|Value|(((
510 -PH4 Calibrate value
523 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
524 +|=(% style="width: 62.5px;" %)(((
525 +**Size (bytes)**
526 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
527 +|**Value**|(((
528 +PH4
529 +
530 +Calibrate value
511 511  )))|PH6.86 Calibrate value|(((
512 -PH9.18 Calibrate value
532 +PH9.18
533 +
534 +Calibrate value
513 513  )))|Reserve|(((
514 514  [[Message Type>>||anchor="H2.3.6MessageType"]]
537 +
515 515  Always 0x03
516 516  )))
517 517  
... ... @@ -518,15 +518,15 @@
518 518  
519 519  User can also send 0x14 downlink command to poll the current calibration payload.
520 520  
521 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:480px" %)
522 -|=(% style="width: 183px; background-color:#D9E2F3;color:#0070C0" %)**Downlink Control Type**|=(% style="width: 55px; background-color:#D9E2F3;color:#0070C0" %)FPort|=(% style="width: 93px; background-color:#D9E2F3;color:#0070C0" %)**Type Code**|=(% style="width: 146px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Downlink payload size(bytes)**
523 -|(% style="width:183px" %)Get Calibration Version Info|(% style="width:55px" %)Any|(% style="width:93px" %)14|(% style="width:146px" %)2
544 +[[image:image-20220607171416-7.jpeg]]
524 524  
546 +
525 525  * Reply to the confirmation package: 14 01
526 526  * Reply to non-confirmed packet: 14 00
527 527  
528 528  
529 529  
552 +
530 530  == 2.8 Frequency Plans ==
531 531  
532 532  
... ... @@ -535,6 +535,7 @@
535 535  )))
536 536  
537 537  
561 +
538 538  === 2.8.1 EU863-870 (EU868) ===
539 539  
540 540  
... ... @@ -595,6 +595,7 @@
595 595  )))
596 596  
597 597  
622 +
598 598  === 2.8.2 US902-928(US915) ===
599 599  
600 600  
... ... @@ -615,6 +615,8 @@
615 615  
616 616  
617 617  
643 +
644 +
618 618  === 2.8.3 CN470-510 (CN470) ===
619 619  
620 620  
... ... @@ -703,6 +703,7 @@
703 703  )))
704 704  
705 705  
733 +
706 706  === 2.8.4 AU915-928(AU915) ===
707 707  
708 708  
... ... @@ -727,6 +727,8 @@
727 727  
728 728  
729 729  
758 +
759 +
730 730  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
731 731  
732 732  
... ... @@ -835,6 +835,7 @@
835 835  )))
836 836  
837 837  
868 +
838 838  === 2.8.6 KR920-923 (KR920) ===
839 839  
840 840  
... ... @@ -907,6 +907,7 @@
907 907  )))
908 908  
909 909  
941 +
910 910  === 2.8.7 IN865-867 (IN865) ===
911 911  
912 912  
... ... @@ -943,6 +943,7 @@
943 943  )))
944 944  
945 945  
978 +
946 946  == 2.9 LED Indicator ==
947 947  
948 948  
... ... @@ -953,17 +953,20 @@
953 953  
954 954  
955 955  
989 +
990 +
956 956  == 2.10 ​Firmware Change Log ==
957 957  
958 958  
959 959  **Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/xtm5tw37mewaw99/AAD0uy06odmreQQ7vMzZYVIGa?dl=0>>https://www.dropbox.com/sh/xtm5tw37mewaw99/AAD0uy06odmreQQ7vMzZYVIGa?dl=0]]
960 960  
996 +
961 961  **Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>path:/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/]]
962 962  
963 963  
1000 +
964 964  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
965 965  
966 -
967 967  (((
968 968  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
969 969  )))
... ... @@ -1011,25 +1011,16 @@
1011 1011  )))
1012 1012  
1013 1013  
1050 +
1014 1014  == 3.1 Set Transmit Interval Time ==
1015 1015  
1016 -
1017 1017  Feature: Change LoRaWAN End Node Transmit Interval.
1018 1018  
1019 1019  (% style="color:#037691" %)**AT Command: AT+TDC**
1020 1020  
1021 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1022 -|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response**
1023 -|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
1024 -30000
1025 -OK
1026 -the interval is 30000ms = 30s
1027 -)))
1028 -|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((
1029 -OK
1030 -Set transmit interval to 60000ms = 60 seconds​
1031 -)))
1057 +[[image:image-20220607171554-8.png]]
1032 1032  
1059 +
1033 1033  (((
1034 1034  (% style="color:#037691" %)**Downlink Command: 0x01**
1035 1035  )))
... ... @@ -1039,14 +1039,14 @@
1039 1039  )))
1040 1040  
1041 1041  (((
1042 -If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
1069 +If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1043 1043  )))
1044 1044  
1045 1045  * (((
1046 -Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
1073 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1047 1047  )))
1048 1048  * (((
1049 -Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
1076 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1050 1050  
1051 1051  
1052 1052  
... ... @@ -1054,26 +1054,13 @@
1054 1054  
1055 1055  == 3.2 Set Interrupt Mode ==
1056 1056  
1057 -
1058 1058  Feature, Set Interrupt mode for GPIO_EXIT.
1059 1059  
1060 1060  (% style="color:#037691" %)**AT Command: AT+INTMOD**
1061 1061  
1062 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1063 -|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1064 -|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
1065 -0
1066 -OK
1067 -the mode is 0 =No interruption
1068 -)))
1069 -|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
1070 -Set Transmit Interval
1071 -0. (Disable Interrupt),
1072 -~1. (Trigger by rising and falling edge)
1073 -2. (Trigger by falling edge)
1074 -3. (Trigger by rising edge)
1075 -)))|(% style="width:157px" %)OK
1088 +[[image:image-20220610105907-1.png]]
1076 1076  
1090 +
1077 1077  (((
1078 1078  (% style="color:#037691" %)**Downlink Command: 0x06**
1079 1079  )))
... ... @@ -1087,10 +1087,10 @@
1087 1087  )))
1088 1088  
1089 1089  * (((
1090 -Example 1: Downlink Payload: 06000000  ~/~/ Turn off interrupt mode
1104 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1091 1091  )))
1092 1092  * (((
1093 -Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
1107 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1094 1094  )))
1095 1095  
1096 1096  (((
... ... @@ -1100,20 +1100,17 @@
1100 1100  
1101 1101  == 3.3 Calibrate Sensor ==
1102 1102  
1103 -
1104 1104  Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
1105 1105  
1106 1106  
1120 +
1107 1107  == 3.4 Get Firmware Version Info ==
1108 1108  
1109 -
1110 1110  Feature: use downlink to get firmware version.
1111 1111  
1112 1112  (% style="color:#037691" %)**Downlink Command: 0x26**
1113 1113  
1114 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
1115 -|(% style="background-color:#d9e2f3; color:#0070c0; width:193px" %)**Downlink Control Type**|(% style="background-color:#d9e2f3; color:#0070c0; width:57px" %)**FPort**|(% style="background-color:#d9e2f3; color:#0070c0; width:91px" %)**Type Code**|(% style="background-color:#d9e2f3; color:#0070c0; width:159px" %)**Downlink payload size(bytes)**
1116 -|(% style="width:193px" %)Get Firmware Version Info|(% style="width:57px" %)Any|(% style="width:91px" %)26|(% style="width:149px" %)2
1127 +[[image:image-20220607171917-10.png]]
1117 1117  
1118 1118  * Reply to the confirmation package: 26 01
1119 1119  * Reply to non-confirmed packet: 26 00
... ... @@ -1122,13 +1122,17 @@
1122 1122  
1123 1123  Configures info payload:
1124 1124  
1125 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
1126 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**5**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**
1127 -|Value|Software Type|(((
1136 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
1137 +|=(((
1138 +**Size(bytes)**
1139 +)))|=**1**|=**1**|=**1**|=**1**|=**1**|=**5**|=**1**
1140 +|**Value**|Software Type|(((
1128 1128  Frequency
1142 +
1129 1129  Band
1130 1130  )))|Sub-band|(((
1131 1131  Firmware
1146 +
1132 1132  Version
1133 1133  )))|Sensor Type|Reserve|(((
1134 1134  [[Message Type>>||anchor="H2.3.6MessageType"]]
... ... @@ -1137,6 +1137,7 @@
1137 1137  
1138 1138  (% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LSPH01
1139 1139  
1155 +
1140 1140  (% style="color:#037691" %)**Frequency Band**:
1141 1141  
1142 1142  *0x01: EU868
... ... @@ -1162,8 +1162,10 @@
1162 1162  
1163 1163  (% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
1164 1164  
1181 +
1165 1165  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
1166 1166  
1184 +
1167 1167  (% style="color:#037691" %)**Sensor Type**:
1168 1168  
1169 1169  0x01: LSE01
... ... @@ -1181,25 +1181,111 @@
1181 1181  0x07: LDDS12
1182 1182  
1183 1183  
1184 -= 4. Battery & Power Consumption =
1185 1185  
1203 += 4. Battery & How to replace =
1186 1186  
1187 -LSPH01 uses ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1205 +== 4.1 Battery Type ==
1188 1188  
1189 -[[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1207 +(((
1208 +LSPH01 is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.
1209 +)))
1190 1190  
1211 +(((
1212 +The discharge curve is not linear so can't simply use percentage to show the battery level. Below is the battery performance.
1213 +)))
1191 1191  
1215 +[[image:1654593587246-335.png]]
1216 +
1217 +
1218 +Minimum Working Voltage for the LSPH01:
1219 +
1220 +LSPH01:  2.45v ~~ 3.6v
1221 +
1222 +
1223 +
1224 +== 4.2 Replace Battery ==
1225 +
1226 +(((
1227 +Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.
1228 +)))
1229 +
1230 +(((
1231 +And make sure the positive and negative pins match.
1232 +)))
1233 +
1234 +
1235 +
1236 +== 4.3 Power Consumption Analyze ==
1237 +
1238 +(((
1239 +Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
1240 +)))
1241 +
1242 +(((
1243 +Instruction to use as below:
1244 +)))
1245 +
1246 +
1247 +(% style="color:#037691" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
1248 +
1249 +[[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
1250 +
1251 +
1252 +(% style="color:#037691" %)**Step 2**(%%): Open it and choose
1253 +
1254 +* Product Model
1255 +* Uplink Interval
1256 +* Working Mode
1257 +
1258 +And the Life expectation in difference case will be shown on the right.
1259 +
1260 +[[image:1654593605679-189.png]]
1261 +
1262 +
1263 +The battery related documents as below:
1264 +
1265 +* (((
1266 +[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
1267 +)))
1268 +* (((
1269 +[[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
1270 +)))
1271 +* (((
1272 +[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
1273 +)))
1274 +
1275 +[[image:image-20220607172042-11.png]]
1276 +
1277 +
1278 +
1279 +=== 4.3.1 ​Battery Note ===
1280 +
1281 +(((
1282 +The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
1283 +)))
1284 +
1285 +
1286 +
1287 +=== ​4.3.2 Replace the battery ===
1288 +
1289 +(((
1290 +You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
1291 +)))
1292 +
1293 +(((
1294 +The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1295 +)))
1296 +
1297 +
1298 +
1192 1192  = 5. Use AT Command =
1193 1193  
1194 1194  == 5.1 Access AT Commands ==
1195 1195  
1196 -
1197 1197  LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.
1198 1198  
1199 -
1200 1200  [[image:1654593668970-604.png]]
1201 1201  
1202 -
1203 1203  **Connection:**
1204 1204  
1205 1205  (% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
... ... @@ -1223,7 +1223,6 @@
1223 1223  
1224 1224  == 6.1 How to change the LoRa Frequency Bands/Region ==
1225 1225  
1226 -
1227 1227  You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1228 1228  When downloading the images, choose the required image file for download. ​
1229 1229  
... ... @@ -1232,13 +1232,12 @@
1232 1232  
1233 1233  == 7.1 AT Commands input doesn't work ==
1234 1234  
1235 -
1236 1236  In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1237 1237  
1238 1238  
1341 +
1239 1239  = 8. Order Info =
1240 1240  
1241 -
1242 1242  Part Number: (% style="color:blue" %)**LSPH01-XX**
1243 1243  
1244 1244  
... ... @@ -1254,7 +1254,6 @@
1254 1254  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1255 1255  
1256 1256  
1257 -
1258 1258  = 9. ​Packing Info =
1259 1259  
1260 1260  
... ... @@ -1270,9 +1270,9 @@
1270 1270  * Weight / pcs : g
1271 1271  
1272 1272  
1273 -
1274 1274  = 10. ​Support =
1275 1275  
1276 -
1277 1277  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1278 1278  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]].
1378 +
1379 +
image-20230426084737-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -190.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0