Skip to Content
Last modified by Xiaoling on 2025/04/25 14:08
From version 85.11
edited by Xiaoling
on 2022/06/08 11:38
Change comment: There is no comment for this version
To version 98.9
edited by Xiaoling
on 2022/08/18 16:33
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -4,71 +4,36 @@
4 4  
5 5  
6 6  
7 -**Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 65  
66 66  
12 +
13 +
14 +
15 +
16 +**Table of Contents:**
17 +
18 +{{toc/}}
19 +
20 +
21 +
22 +
23 +
24 +
25 +
26 +
27 +
28 +
67 67  = 1. Introduction =
68 68  
31 +
69 69  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
70 70  
71 71  (((
35 +
36 +
72 72  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
73 73  )))
74 74  
... ... @@ -96,6 +96,7 @@
96 96  
97 97  == ​1.2 Features ==
98 98  
64 +
99 99  * LoRaWAN 1.0.3 Class A
100 100  * Ultra-low power consumption
101 101  * Monitor soil pH with temperature compensation.
... ... @@ -112,6 +112,8 @@
112 112  
113 113  
114 114  
81 +
82 +
115 115  == 1.3 Probe Specification ==
116 116  
117 117  
... ... @@ -134,14 +134,19 @@
134 134  
135 135  
136 136  
105 +
106 +
137 137  == 1.4 ​Applications ==
138 138  
109 +
139 139  * Smart Agriculture
140 140  
141 141  
142 142  
114 +
143 143  == 1.5 Pin mapping and power on ==
144 144  
117 +
145 145  [[image:1654592472094-134.png]]
146 146  
147 147  
... ... @@ -148,19 +148,23 @@
148 148  
149 149  = 2. Configure LSPH01 to connect to LoRaWAN network =
150 150  
124 +
151 151  == 2.1 How it works ==
152 152  
127 +
153 153  (((
154 154  The LSPH01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSPH01. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
155 155  )))
156 156  
157 157  (((
158 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
133 +In case you can't set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
159 159  )))
160 160  
161 161  
137 +
162 162  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
163 163  
140 +
164 164  (((
165 165  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.
166 166  )))
... ... @@ -167,10 +167,14 @@
167 167  
168 168  (((
169 169  [[image:1654592492399-921.png]]
147 +
148 +
170 170  )))
171 171  
172 172  (((
173 173  The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
153 +
154 +
174 174  )))
175 175  
176 176  (((
... ... @@ -194,11 +194,13 @@
194 194  [[image:1654592600093-601.png]]
195 195  
196 196  
178 +
197 197  **Add APP EUI and DEV EUI**
198 198  
199 199  [[image:1654592619856-881.png]]
200 200  
201 201  
184 +
202 202  **Add APP EUI in the application**
203 203  
204 204  [[image:1654592632656-512.png]]
... ... @@ -220,6 +220,8 @@
220 220  
221 221  (((
222 222  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
206 +
207 +
223 223  )))
224 224  
225 225  [[image:1654592697690-910.png]]
... ... @@ -228,6 +228,7 @@
228 228  
229 229  == 2.3 ​Uplink Payload ==
230 230  
216 +
231 231  (((
232 232  LSPH01 will uplink payload via LoRaWAN with below payload format: 
233 233  )))
... ... @@ -271,6 +271,7 @@
271 271  
272 272  === 2.3.2 DS18B20 Temperature sensor ===
273 273  
260 +
274 274  This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
275 275  
276 276  
... ... @@ -284,6 +284,7 @@
284 284  
285 285  === 2.3.3 Soil pH ===
286 286  
274 +
287 287  Range: 0 ~~ 14 pH
288 288  
289 289  **Example:**
... ... @@ -294,6 +294,7 @@
294 294  
295 295  === 2.3.4 Soil Temperature ===
296 296  
285 +
297 297  Get Soil Temperature 
298 298  
299 299  
... ... @@ -307,6 +307,7 @@
307 307  
308 308  === 2.3.5 Interrupt Pin ===
309 309  
299 +
310 310  This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
311 311  
312 312  
... ... @@ -320,6 +320,7 @@
320 320  
321 321  === 2.3.6 Message Type ===
322 322  
313 +
323 323  (((
324 324  For a normal uplink payload, the message type is always 0x01.
325 325  )))
... ... @@ -337,6 +337,8 @@
337 337  
338 338  
339 339  
331 +
332 +
340 340  === 2.3.7 Decode payload in The Things Network ===
341 341  
342 342  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -349,7 +349,7 @@
349 349  )))
350 350  
351 351  (((
352 -LSPH01 TTN Payload Decoder: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
345 +LSPH01 TTN Payload Decoder:  [[https:~~/~~/www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0>>https://www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0]]
353 353  )))
354 354  
355 355  
... ... @@ -356,12 +356,14 @@
356 356  
357 357  == 2.4 Uplink Interval ==
358 358  
359 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
360 360  
353 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
361 361  
362 362  
356 +
363 363  == 2.5 ​Show Data in DataCake IoT Server ==
364 364  
359 +
365 365  (((
366 366  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
367 367  )))
... ... @@ -404,7 +404,7 @@
404 404  )))
405 405  
406 406  (((
407 -Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
402 +Download Datacake decoder from: [[https:~~/~~/www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0>>url:https://www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0]]
408 408  )))
409 409  
410 410  
... ... @@ -425,8 +425,10 @@
425 425  
426 426  == 2.6 Installation and Maintain ==
427 427  
423 +
428 428  === 2.6.1 Before measurement ===
429 429  
426 +
430 430  (((
431 431  (((
432 432  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
... ... @@ -444,6 +444,8 @@
444 444  
445 445  (((
446 446  [[image:1654592946732-634.png]]
444 +
445 +
447 447  )))
448 448  
449 449  (((
... ... @@ -455,7 +455,7 @@
455 455  )))
456 456  
457 457  (((
458 -Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
457 +Slowly insert the probe to the measure point. Don't use large force which will break the probe. Make sure not shake when inserting.
459 459  )))
460 460  
461 461  (((
... ... @@ -482,6 +482,7 @@
482 482  
483 483  === 2.6.3 Maintain Probe ===
484 484  
484 +
485 485  1. (((
486 486  pH probe electrode is fragile and no strong. User must avoid strong force or hitting it.
487 487  )))
... ... @@ -504,10 +504,9 @@
504 504  
505 505  )))
506 506  
507 -
508 -
509 509  == 2.7 Calibration ==
510 510  
509 +
511 511  (((
512 512  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
513 513  )))
... ... @@ -522,11 +522,9 @@
522 522  (% style="color:#037691" %)**Calibration Payload**
523 523  
524 524  (% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
525 -|(((
526 -**Size**
527 -
528 -**(bytes)**
529 -)))|**1**|**1**|**1**|**7**|**1**
524 +|=(% style="width: 62.5px;" %)(((
525 +**Size (bytes)**
526 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
530 530  |**Value**|(((
531 531  PH4
532 532  
... ... @@ -541,6 +541,7 @@
541 541  Always 0x03
542 542  )))
543 543  
541 +
544 544  User can also send 0x14 downlink command to poll the current calibration payload.
545 545  
546 546  [[image:image-20220607171416-7.jpeg]]
... ... @@ -549,15 +549,21 @@
549 549  * Reply to the confirmation package: 14 01
550 550  * Reply to non-confirmed packet: 14 00
551 551  
550 +
551 +
552 +
552 552  == 2.8 Frequency Plans ==
553 553  
555 +
554 554  (((
555 555  The LSPH01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
556 556  )))
557 557  
558 558  
561 +
559 559  === 2.8.1 EU863-870 (EU868) ===
560 560  
564 +
561 561  (((
562 562  (% style="color:blue" %)**Uplink:**
563 563  )))
... ... @@ -618,6 +618,7 @@
618 618  
619 619  === 2.8.2 US902-928(US915) ===
620 620  
625 +
621 621  (((
622 622  Used in USA, Canada and South America. Frequency band as per definition in LoRaWAN 1.0.3 Regional document.
623 623  )))
... ... @@ -631,10 +631,15 @@
631 631  )))
632 632  
633 633  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
634 -* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
639 +* Use the Join successful sub-band if the server doesn't include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
635 635  
641 +
642 +
643 +
644 +
636 636  === 2.8.3 CN470-510 (CN470) ===
637 637  
647 +
638 638  (((
639 639  Used in China, Default use CHE=1
640 640  )))
... ... @@ -723,6 +723,7 @@
723 723  
724 724  === 2.8.4 AU915-928(AU915) ===
725 725  
736 +
726 726  (((
727 727  Frequency band as per definition in LoRaWAN 1.0.3 Regional document.
728 728  )))
... ... @@ -740,10 +740,15 @@
740 740  )))
741 741  
742 742  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
743 -* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
754 +* Use the Join successful sub-band if the server doesn't include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
744 744  
756 +
757 +
758 +
759 +
745 745  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
746 746  
762 +
747 747  (((
748 748  (% style="color:blue" %)**Default Uplink channel:**
749 749  )))
... ... @@ -852,6 +852,7 @@
852 852  
853 853  === 2.8.6 KR920-923 (KR920) ===
854 854  
871 +
855 855  (((
856 856  (% style="color:blue" %)**Default channel:**
857 857  )))
... ... @@ -924,6 +924,7 @@
924 924  
925 925  === 2.8.7 IN865-867 (IN865) ===
926 926  
944 +
927 927  (((
928 928  (% style="color:blue" %)**Uplink:**
929 929  )))
... ... @@ -960,19 +960,22 @@
960 960  
961 961  == 2.9 LED Indicator ==
962 962  
981 +
963 963  The LSPH01 has an internal LED which is to show the status of different state.
964 964  
965 965  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
966 966  * Blink once when device transmit a packet.
967 967  
968 -== 2.10 ​Firmware Change Log ==
969 969  
970 970  
971 -**Firmware download link:**
972 972  
973 -[[http:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
974 974  
991 +== 2.10 ​Firmware Change Log ==
975 975  
993 +
994 +**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/xtm5tw37mewaw99/AAD0uy06odmreQQ7vMzZYVIGa?dl=0>>https://www.dropbox.com/sh/xtm5tw37mewaw99/AAD0uy06odmreQQ7vMzZYVIGa?dl=0]]
995 +
996 +
976 976  **Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>path:/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/]]
977 977  
978 978  
... ... @@ -1010,7 +1010,7 @@
1010 1010  )))
1011 1011  
1012 1012  (((
1013 -They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
1034 +They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki: [[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
1014 1014  )))
1015 1015  
1016 1016  (((
... ... @@ -1036,7 +1036,6 @@
1036 1036  [[image:image-20220607171554-8.png]]
1037 1037  
1038 1038  
1039 -
1040 1040  (((
1041 1041  (% style="color:#037691" %)**Downlink Command: 0x01**
1042 1042  )))
... ... @@ -1065,7 +1065,7 @@
1065 1065  
1066 1066  (% style="color:#037691" %)**AT Command: AT+INTMOD**
1067 1067  
1068 -[[image:image-20220607171716-9.png]]
1088 +[[image:image-20220610105907-1.png]]
1069 1069  
1070 1070  
1071 1071  (((
... ... @@ -1092,7 +1092,6 @@
1092 1092  )))
1093 1093  
1094 1094  
1095 -
1096 1096  == 3.3 Calibrate Sensor ==
1097 1097  
1098 1098  Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
... ... @@ -1131,10 +1131,10 @@
1131 1131  Always 0x02
1132 1132  )))
1133 1133  
1134 -**Software Type**: Always 0x03 for LSPH01
1153 +(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LSPH01
1135 1135  
1136 1136  
1137 -**Frequency Band**:
1156 +(% style="color:#037691" %)**Frequency Band**:
1138 1138  
1139 1139  *0x01: EU868
1140 1140  
... ... @@ -1157,13 +1157,13 @@
1157 1157  *0xa0: AS923-3
1158 1158  
1159 1159  
1160 -**Sub-Band**: value 0x00 ~~ 0x08
1179 +(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
1161 1161  
1162 1162  
1163 -**Firmware Version**: 0x0100, Means: v1.0.0 version
1182 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
1164 1164  
1165 1165  
1166 -**Sensor Type**:
1185 +(% style="color:#037691" %)**Sensor Type**:
1167 1167  
1168 1168  0x01: LSE01
1169 1169  
... ... @@ -1190,7 +1190,7 @@
1190 1190  )))
1191 1191  
1192 1192  (((
1193 -The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1212 +The discharge curve is not linear so can't simply use percentage to show the battery level. Below is the battery performance.
1194 1194  )))
1195 1195  
1196 1196  [[image:1654593587246-335.png]]
... ... @@ -1225,12 +1225,12 @@
1225 1225  )))
1226 1226  
1227 1227  
1228 -**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
1247 +(% style="color:#037691" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
1229 1229  
1230 1230  [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
1231 1231  
1232 1232  
1233 -**Step 2**: Open it and choose
1252 +(% style="color:#037691" %)**Step 2**(%%): Open it and choose
1234 1234  
1235 1235  * Product Model
1236 1236  * Uplink Interval
... ... @@ -1244,13 +1244,13 @@
1244 1244  The battery related documents as below:
1245 1245  
1246 1246  * (((
1247 -[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
1266 +[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
1248 1248  )))
1249 1249  * (((
1250 1250  [[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
1251 1251  )))
1252 1252  * (((
1253 -[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
1272 +[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
1254 1254  )))
1255 1255  
1256 1256  [[image:image-20220607172042-11.png]]
... ... @@ -1268,11 +1268,11 @@
1268 1268  === ​4.3.2 Replace the battery ===
1269 1269  
1270 1270  (((
1271 -You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1290 +You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
1272 1272  )))
1273 1273  
1274 1274  (((
1275 -The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1294 +The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1276 1276  )))
1277 1277  
1278 1278  
... ... @@ -1314,11 +1314,12 @@
1314 1314  
1315 1315  = 7. Trouble Shooting =
1316 1316  
1317 -== 7.1 AT Commands input doesn’t work ==
1336 +== 7.1 AT Commands input doesn't work ==
1318 1318  
1319 -In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1338 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1320 1320  
1321 1321  
1341 +
1322 1322  = 8. Order Info =
1323 1323  
1324 1324  Part Number: (% style="color:blue" %)**LSPH01-XX**
... ... @@ -1335,6 +1335,7 @@
1335 1335  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1336 1336  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1337 1337  
1358 +
1338 1338  = 9. ​Packing Info =
1339 1339  
1340 1340  
... ... @@ -1349,6 +1349,7 @@
1349 1349  * Package Size / pcs : cm
1350 1350  * Weight / pcs : g
1351 1351  
1373 +
1352 1352  = 10. ​Support =
1353 1353  
1354 1354  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
image-20220610105907-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +15.5 KB
Content