Skip to Content
Last modified by Xiaoling on 2025/04/25 14:08
From version 79.5
edited by Xiaoling
on 2022/06/07 18:02
Change comment: There is no comment for this version
To version 98.7
edited by Xiaoling
on 2022/08/18 16:25
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -4,69 +4,36 @@
4 4  
5 5  
6 6  
7 -**Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
10 +
11 +
12 +
13 +
14 +
15 +
16 +**Table of Contents:**
17 +
18 +{{toc/}}
19 +
20 +
21 +
22 +
23 +
24 +
25 +
26 +
27 +
28 +
65 65  = 1. Introduction =
66 66  
31 +
67 67  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
68 68  
69 69  (((
35 +
36 +
70 70  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
71 71  )))
72 72  
... ... @@ -91,8 +91,10 @@
91 91  
92 92  
93 93  
61 +
94 94  == ​1.2 Features ==
95 95  
64 +
96 96  * LoRaWAN 1.0.3 Class A
97 97  * Ultra-low power consumption
98 98  * Monitor soil pH with temperature compensation.
... ... @@ -107,6 +107,10 @@
107 107  * IP68 rate for the Sensor Probe
108 108  * 8500mAh Battery for long term use
109 109  
79 +
80 +
81 +
82 +
110 110  == 1.3 Probe Specification ==
111 111  
112 112  
... ... @@ -127,12 +127,21 @@
127 127  * IP68 Protection
128 128  * Length: 3.5 meters
129 129  
103 +
104 +
105 +
106 +
130 130  == 1.4 ​Applications ==
131 131  
109 +
132 132  * Smart Agriculture
133 133  
112 +
113 +
114 +
134 134  == 1.5 Pin mapping and power on ==
135 135  
117 +
136 136  [[image:1654592472094-134.png]]
137 137  
138 138  
... ... @@ -139,19 +139,23 @@
139 139  
140 140  = 2. Configure LSPH01 to connect to LoRaWAN network =
141 141  
124 +
142 142  == 2.1 How it works ==
143 143  
127 +
144 144  (((
145 145  The LSPH01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSPH01. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
146 146  )))
147 147  
148 148  (((
149 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
133 +In case you can't set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
150 150  )))
151 151  
152 152  
137 +
153 153  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
154 154  
140 +
155 155  (((
156 156  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.
157 157  )))
... ... @@ -158,10 +158,14 @@
158 158  
159 159  (((
160 160  [[image:1654592492399-921.png]]
147 +
148 +
161 161  )))
162 162  
163 163  (((
164 164  The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
153 +
154 +
165 165  )))
166 166  
167 167  (((
... ... @@ -185,11 +185,13 @@
185 185  [[image:1654592600093-601.png]]
186 186  
187 187  
178 +
188 188  **Add APP EUI and DEV EUI**
189 189  
190 190  [[image:1654592619856-881.png]]
191 191  
192 192  
184 +
193 193  **Add APP EUI in the application**
194 194  
195 195  [[image:1654592632656-512.png]]
... ... @@ -211,6 +211,8 @@
211 211  
212 212  (((
213 213  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
206 +
207 +
214 214  )))
215 215  
216 216  [[image:1654592697690-910.png]]
... ... @@ -219,6 +219,7 @@
219 219  
220 220  == 2.3 ​Uplink Payload ==
221 221  
216 +
222 222  (((
223 223  LSPH01 will uplink payload via LoRaWAN with below payload format: 
224 224  )))
... ... @@ -232,19 +232,17 @@
232 232  )))
233 233  
234 234  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
235 -|(((
236 -**Size**
230 +|=(% style="width: 62.5px;" %)(((
231 +**Size (bytes)**
232 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
233 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
234 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
237 237  
238 -**(bytes)**
239 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
240 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
241 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
242 -
243 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
244 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
245 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
236 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
237 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
238 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
246 246  )))|Reserve|(((
247 -[[Message Type>>path:#H2.3.6MessageType]]
240 +[[Message Type>>||anchor="H2.3.6MessageType"]]
248 248  )))
249 249  
250 250  [[image:1654592721645-318.png]]
... ... @@ -264,6 +264,7 @@
264 264  
265 265  === 2.3.2 DS18B20 Temperature sensor ===
266 266  
260 +
267 267  This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
268 268  
269 269  
... ... @@ -277,6 +277,7 @@
277 277  
278 278  === 2.3.3 Soil pH ===
279 279  
274 +
280 280  Range: 0 ~~ 14 pH
281 281  
282 282  **Example:**
... ... @@ -287,6 +287,7 @@
287 287  
288 288  === 2.3.4 Soil Temperature ===
289 289  
285 +
290 290  Get Soil Temperature 
291 291  
292 292  
... ... @@ -300,9 +300,10 @@
300 300  
301 301  === 2.3.5 Interrupt Pin ===
302 302  
303 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
304 304  
300 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
305 305  
302 +
306 306  **Example:**
307 307  
308 308  0x00: Normal uplink packet.
... ... @@ -313,6 +313,7 @@
313 313  
314 314  === 2.3.6 Message Type ===
315 315  
313 +
316 316  (((
317 317  For a normal uplink payload, the message type is always 0x01.
318 318  )))
... ... @@ -322,15 +322,16 @@
322 322  )))
323 323  
324 324  
325 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
326 -|=**Message Type Code**|=**Description**|=**Payload**
327 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
328 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
329 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
323 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
324 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
325 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
326 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
327 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
330 330  
331 331  
332 332  
333 333  
332 +
334 334  === 2.3.7 Decode payload in The Things Network ===
335 335  
336 336  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -343,7 +343,7 @@
343 343  )))
344 344  
345 345  (((
346 -LSPH01 TTN Payload Decoder: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
345 +LSPH01 TTN Payload Decoder:  [[https:~~/~~/www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0>>https://www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0]]
347 347  )))
348 348  
349 349  
... ... @@ -350,12 +350,14 @@
350 350  
351 351  == 2.4 Uplink Interval ==
352 352  
353 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
354 354  
353 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
355 355  
356 356  
356 +
357 357  == 2.5 ​Show Data in DataCake IoT Server ==
358 358  
359 +
359 359  (((
360 360  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
361 361  )))
... ... @@ -398,7 +398,7 @@
398 398  )))
399 399  
400 400  (((
401 -Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
402 +Download Datacake decoder from: [[https:~~/~~/www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0>>url:https://www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0]]
402 402  )))
403 403  
404 404  
... ... @@ -514,11 +514,9 @@
514 514  (% style="color:#037691" %)**Calibration Payload**
515 515  
516 516  (% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
517 -|(((
518 -**Size**
519 -
520 -**(bytes)**
521 -)))|**1**|**1**|**1**|**7**|**1**
518 +|=(% style="width: 62.5px;" %)(((
519 +**Size (bytes)**
520 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
522 522  |**Value**|(((
523 523  PH4
524 524  
... ... @@ -528,7 +528,7 @@
528 528  
529 529  Calibrate value
530 530  )))|Reserve|(((
531 -[[Message Type>>path:#H2.3.6MessageType]]
530 +[[Message Type>>||anchor="H2.3.6MessageType"]]
532 532  
533 533  Always 0x03
534 534  )))
... ... @@ -542,8 +542,6 @@
542 542  * Reply to non-confirmed packet: 14 00
543 543  
544 544  
545 -
546 -
547 547  == 2.8 Frequency Plans ==
548 548  
549 549  (((
... ... @@ -626,11 +626,8 @@
626 626  )))
627 627  
628 628  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
629 -* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
626 +* Use the Join successful sub-band if the server doesn't include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
630 630  
631 -
632 -
633 -
634 634  === 2.8.3 CN470-510 (CN470) ===
635 635  
636 636  (((
... ... @@ -738,11 +738,8 @@
738 738  )))
739 739  
740 740  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
741 -* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
735 +* Use the Join successful sub-band if the server doesn't include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
742 742  
743 -
744 -
745 -
746 746  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
747 747  
748 748  (((
... ... @@ -966,8 +966,6 @@
966 966  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
967 967  * Blink once when device transmit a packet.
968 968  
969 -
970 -
971 971  == 2.10 ​Firmware Change Log ==
972 972  
973 973  
... ... @@ -987,7 +987,7 @@
987 987  )))
988 988  
989 989  * (((
990 -AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
979 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
991 991  )))
992 992  * (((
993 993  LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
... ... @@ -1013,7 +1013,7 @@
1013 1013  )))
1014 1014  
1015 1015  (((
1016 -They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
1005 +They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki: [[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
1017 1017  )))
1018 1018  
1019 1019  (((
... ... @@ -1039,7 +1039,6 @@
1039 1039  [[image:image-20220607171554-8.png]]
1040 1040  
1041 1041  
1042 -
1043 1043  (((
1044 1044  (% style="color:#037691" %)**Downlink Command: 0x01**
1045 1045  )))
... ... @@ -1068,7 +1068,7 @@
1068 1068  
1069 1069  (% style="color:#037691" %)**AT Command: AT+INTMOD**
1070 1070  
1071 -[[image:image-20220607171716-9.png]]
1059 +[[image:image-20220610105907-1.png]]
1072 1072  
1073 1073  
1074 1074  (((
... ... @@ -1095,10 +1095,9 @@
1095 1095  )))
1096 1096  
1097 1097  
1098 -
1099 1099  == 3.3 Calibrate Sensor ==
1100 1100  
1101 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1088 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
1102 1102  
1103 1103  
1104 1104  
... ... @@ -1130,14 +1130,14 @@
1130 1130  
1131 1131  Version
1132 1132  )))|Sensor Type|Reserve|(((
1133 -[[Message Type>>path:#H2.3.6MessageType]]
1120 +[[Message Type>>||anchor="H2.3.6MessageType"]]
1134 1134  Always 0x02
1135 1135  )))
1136 1136  
1137 -**Software Type**: Always 0x03 for LSPH01
1124 +(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LSPH01
1138 1138  
1139 1139  
1140 -**Frequency Band**:
1127 +(% style="color:#037691" %)**Frequency Band**:
1141 1141  
1142 1142  *0x01: EU868
1143 1143  
... ... @@ -1160,13 +1160,13 @@
1160 1160  *0xa0: AS923-3
1161 1161  
1162 1162  
1163 -**Sub-Band**: value 0x00 ~~ 0x08
1150 +(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
1164 1164  
1165 1165  
1166 -**Firmware Version**: 0x0100, Means: v1.0.0 version
1153 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
1167 1167  
1168 1168  
1169 -**Sensor Type**:
1156 +(% style="color:#037691" %)**Sensor Type**:
1170 1170  
1171 1171  0x01: LSE01
1172 1172  
... ... @@ -1193,7 +1193,7 @@
1193 1193  )))
1194 1194  
1195 1195  (((
1196 -The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1183 +The discharge curve is not linear so can't simply use percentage to show the battery level. Below is the battery performance.
1197 1197  )))
1198 1198  
1199 1199  [[image:1654593587246-335.png]]
... ... @@ -1228,12 +1228,12 @@
1228 1228  )))
1229 1229  
1230 1230  
1231 -**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
1218 +(% style="color:#037691" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
1232 1232  
1233 1233  [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
1234 1234  
1235 1235  
1236 -**Step 2**: Open it and choose
1223 +(% style="color:#037691" %)**Step 2**(%%): Open it and choose
1237 1237  
1238 1238  * Product Model
1239 1239  * Uplink Interval
... ... @@ -1247,13 +1247,13 @@
1247 1247  The battery related documents as below:
1248 1248  
1249 1249  * (((
1250 -[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
1237 +[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
1251 1251  )))
1252 1252  * (((
1253 1253  [[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
1254 1254  )))
1255 1255  * (((
1256 -[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
1243 +[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
1257 1257  )))
1258 1258  
1259 1259  [[image:image-20220607172042-11.png]]
... ... @@ -1271,11 +1271,11 @@
1271 1271  === ​4.3.2 Replace the battery ===
1272 1272  
1273 1273  (((
1274 -You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1261 +You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
1275 1275  )))
1276 1276  
1277 1277  (((
1278 -The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1265 +The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1279 1279  )))
1280 1280  
1281 1281  
... ... @@ -1304,24 +1304,22 @@
1304 1304  
1305 1305   [[image:1654593712276-618.png]]
1306 1306  
1307 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1294 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1308 1308  
1309 1309  
1310 -
1311 1311  = 6. FAQ =
1312 1312  
1313 1313  == 6.1 How to change the LoRa Frequency Bands/Region ==
1314 1314  
1315 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1301 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1316 1316  When downloading the images, choose the required image file for download. ​
1317 1317  
1318 1318  
1319 -
1320 1320  = 7. Trouble Shooting =
1321 1321  
1322 -== 7.1 AT Commands input doesn’t work ==
1307 +== 7.1 AT Commands input doesn't work ==
1323 1323  
1324 -In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1309 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1325 1325  
1326 1326  
1327 1327  
... ... @@ -1341,6 +1341,7 @@
1341 1341  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1342 1342  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1343 1343  
1329 +
1344 1344  = 9. ​Packing Info =
1345 1345  
1346 1346  
... ... @@ -1355,6 +1355,7 @@
1355 1355  * Package Size / pcs : cm
1356 1356  * Weight / pcs : g
1357 1357  
1344 +
1358 1358  = 10. ​Support =
1359 1359  
1360 1360  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
image-20220610105907-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +15.5 KB
Content