Skip to Content
Last modified by Xiaoling on 2025/04/25 14:08
From version 74.9
edited by Xiaoling
on 2022/06/07 17:51
Change comment: There is no comment for this version
To version 99.21
edited by Xiaoling
on 2023/05/23 18:09
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -4,63 +4,10 @@
4 4  
5 5  
6 6  
7 -**Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
8 +**Table of Contents:**
63 63  
10 +{{toc/}}
64 64  
65 65  
66 66  
... ... @@ -71,6 +71,7 @@
71 71  
72 72  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
73 73  
21 +
74 74  (((
75 75  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
76 76  )))
... ... @@ -95,9 +95,9 @@
95 95  [[image:1654592435432-887.png]]
96 96  
97 97  
98 -
99 99  == ​1.2 Features ==
100 100  
48 +
101 101  * LoRaWAN 1.0.3 Class A
102 102  * Ultra-low power consumption
103 103  * Monitor soil pH with temperature compensation.
... ... @@ -113,6 +113,7 @@
113 113  * 8500mAh Battery for long term use
114 114  
115 115  
64 +
116 116  == 1.3 Probe Specification ==
117 117  
118 118  
... ... @@ -134,32 +134,37 @@
134 134  * Length: 3.5 meters
135 135  
136 136  
86 +
137 137  == 1.4 ​Applications ==
138 138  
89 +
139 139  * Smart Agriculture
140 140  
141 141  
93 +
142 142  == 1.5 Pin mapping and power on ==
143 143  
96 +
144 144  [[image:1654592472094-134.png]]
145 145  
146 146  
147 -
148 148  = 2. Configure LSPH01 to connect to LoRaWAN network =
149 149  
150 150  == 2.1 How it works ==
151 151  
104 +
152 152  (((
153 153  The LSPH01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSPH01. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
154 154  )))
155 155  
156 156  (((
157 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
110 +In case you can't set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
158 158  )))
159 159  
160 160  
161 161  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
162 162  
116 +
163 163  (((
164 164  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.
165 165  )))
... ... @@ -166,10 +166,14 @@
166 166  
167 167  (((
168 168  [[image:1654592492399-921.png]]
123 +
124 +
169 169  )))
170 170  
171 171  (((
172 172  The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
129 +
130 +
173 173  )))
174 174  
175 175  (((
... ... @@ -180,10 +180,10 @@
180 180  Each LSPH01 is shipped with a sticker with the default device EUI as below:
181 181  )))
182 182  
183 -[[image:image-20220607170145-1.jpeg]]
141 +[[image:image-20230426084737-1.png||height="246" width="530"]](% style="display:none" %)
184 184  
143 +(% style="display:none" %) (%%)
185 185  
186 -
187 187  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
188 188  
189 189  
... ... @@ -193,11 +193,13 @@
193 193  [[image:1654592600093-601.png]]
194 194  
195 195  
154 +
196 196  **Add APP EUI and DEV EUI**
197 197  
198 198  [[image:1654592619856-881.png]]
199 199  
200 200  
160 +
201 201  **Add APP EUI in the application**
202 202  
203 203  [[image:1654592632656-512.png]]
... ... @@ -219,14 +219,16 @@
219 219  
220 220  (((
221 221  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
182 +
183 +
222 222  )))
223 223  
224 224  [[image:1654592697690-910.png]]
225 225  
226 226  
227 -
228 228  == 2.3 ​Uplink Payload ==
229 229  
191 +
230 230  (((
231 231  LSPH01 will uplink payload via LoRaWAN with below payload format: 
232 232  )))
... ... @@ -239,26 +239,21 @@
239 239  Normal uplink payload:
240 240  )))
241 241  
242 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
243 -|(((
244 -**Size**
245 -
246 -**(bytes)**
247 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
248 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
249 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
250 -
251 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
252 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
253 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
204 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:470px" %)
205 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
206 +**Size(bytes)**
207 +)))|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**1**
208 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
209 +[[Temperature (Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
210 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
211 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
254 254  )))|Reserve|(((
255 -[[Message Type>>path:#H2.3.6MessageType]]
213 +[[Message Type>>||anchor="H2.3.6MessageType"]]
256 256  )))
257 257  
258 258  [[image:1654592721645-318.png]]
259 259  
260 260  
261 -
262 262  === 2.3.1 Battery Info ===
263 263  
264 264  
... ... @@ -269,9 +269,9 @@
269 269  Ex2: 0x0B49 = 2889mV
270 270  
271 271  
272 -
273 273  === 2.3.2 DS18B20 Temperature sensor ===
274 274  
231 +
275 275  This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
276 276  
277 277  
... ... @@ -282,9 +282,9 @@
282 282  If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
283 283  
284 284  
285 -
286 286  === 2.3.3 Soil pH ===
287 287  
244 +
288 288  Range: 0 ~~ 14 pH
289 289  
290 290  **Example:**
... ... @@ -292,9 +292,9 @@
292 292  (% style="color:#037691" %)** 0x02B7(H) = 695(D) = 6.95pH**
293 293  
294 294  
295 -
296 296  === 2.3.4 Soil Temperature ===
297 297  
254 +
298 298  Get Soil Temperature 
299 299  
300 300  
... ... @@ -305,12 +305,12 @@
305 305  If payload is: **FF3FH** :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
306 306  
307 307  
308 -
309 309  === 2.3.5 Interrupt Pin ===
310 310  
311 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
312 312  
268 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
313 313  
270 +
314 314  **Example:**
315 315  
316 316  0x00: Normal uplink packet.
... ... @@ -318,9 +318,9 @@
318 318  0x01: Interrupt Uplink Packet.
319 319  
320 320  
321 -
322 322  === 2.3.6 Message Type ===
323 323  
280 +
324 324  (((
325 325  For a normal uplink payload, the message type is always 0x01.
326 326  )))
... ... @@ -330,16 +330,17 @@
330 330  )))
331 331  
332 332  
333 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
334 -|=**Message Type Code**|=**Description**|=**Payload**
335 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
336 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
337 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
290 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:496px" %)
291 +|=(% style="width: 160px;background-color:#D9E2F3;color:#0070C0" %)**Message Type Code**|=(% style="width: 163px;background-color:#D9E2F3;color:#0070C0" %)**Description**|=(% style="width: 173px;background-color:#D9E2F3;color:#0070C0" %)**Payload**
292 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
293 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
294 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
338 338  
339 339  
340 340  
341 341  === 2.3.7 Decode payload in The Things Network ===
342 342  
300 +
343 343  While using TTN network, you can add the payload format to decode the payload.
344 344  
345 345  
... ... @@ -350,19 +350,19 @@
350 350  )))
351 351  
352 352  (((
353 -LSPH01 TTN Payload Decoder: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
311 +LSPH01 TTN Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
354 354  )))
355 355  
356 356  
357 -
358 358  == 2.4 Uplink Interval ==
359 359  
360 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
361 361  
318 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
362 362  
363 363  
364 364  == 2.5 ​Show Data in DataCake IoT Server ==
365 365  
323 +
366 366  (((
367 367  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
368 368  )))
... ... @@ -393,7 +393,6 @@
393 393  [[image:1654592819047-535.png]]
394 394  
395 395  
396 -
397 397  [[image:1654592833877-762.png]]
398 398  
399 399  
... ... @@ -405,7 +405,7 @@
405 405  )))
406 406  
407 407  (((
408 -Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
365 +Download Datacake decoder from: [[https:~~/~~/www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0>>url:https://www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0]]
409 409  )))
410 410  
411 411  
... ... @@ -423,11 +423,11 @@
423 423  [[image:1654592917530-261.png]]
424 424  
425 425  
426 -
427 427  == 2.6 Installation and Maintain ==
428 428  
429 429  === 2.6.1 Before measurement ===
430 430  
387 +
431 431  (((
432 432  (((
433 433  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
... ... @@ -435,7 +435,6 @@
435 435  )))
436 436  
437 437  
438 -
439 439  === 2.6.2 Measurement ===
440 440  
441 441  
... ... @@ -445,6 +445,8 @@
445 445  
446 446  (((
447 447  [[image:1654592946732-634.png]]
404 +
405 +
448 448  )))
449 449  
450 450  (((
... ... @@ -456,7 +456,7 @@
456 456  )))
457 457  
458 458  (((
459 -Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
417 +Slowly insert the probe to the measure point. Don't use large force which will break the probe. Make sure not shake when inserting.
460 460  )))
461 461  
462 462  (((
... ... @@ -480,9 +480,9 @@
480 480  )))
481 481  
482 482  
483 -
484 484  === 2.6.3 Maintain Probe ===
485 485  
443 +
486 486  1. (((
487 487  pH probe electrode is fragile and no strong. User must avoid strong force or hitting it.
488 488  )))
... ... @@ -507,6 +507,7 @@
507 507  
508 508  == 2.7 Calibration ==
509 509  
468 +
510 510  (((
511 511  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
512 512  )))
... ... @@ -513,38 +513,56 @@
513 513  
514 514  (((
515 515  After stable, user can use below command to calibrate.
475 +
476 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:520px" %)
477 +|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**pH buffer solution**|(% style="background-color:#d9e2f3; color:#0070c0; width:150px" %)**AT Command to calibrate**|(% style="background-color:#d9e2f3; color:#0070c0; width:150px" %)**Downlink Command**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**Read Cal Value**
478 +|(% style="width:149px" %)4.00|(% style="width:197px" %)AT+PHCAL=4|(% style="width:206px" %)(((
479 +0x13 04
480 +Reply with Calibrate payload
481 +)))|(% style="width:136px" %)(((
482 +AT+PHCAL=?
483 +Example 41,61,91
516 516  )))
485 +|(% style="width:149px" %)6.86|(% style="width:197px" %)AT+PHCAL=6|(% style="width:206px" %)(((
486 +0x13 06
487 +Reply with Calibrate payload
488 +)))|(% style="width:136px" %)AT+PHCAL=?
489 +|(% style="width:149px" %)9.18|(% style="width:197px" %)AT+PHCAL=9|(% style="width:206px" %)(((
490 +0x13 09
491 +Reply with Calibrate payload
492 +)))|(% style="width:136px" %)AT+PHCAL=?
493 +|(% style="width:149px" %)Factory Default|(% style="width:197px" %)AT+PHCAL=15|(% style="width:206px" %)(((
494 +0x13 15
495 +Reply with Calibrate payload
496 +)))|(% style="width:136px" %)(((
497 +AT+PHCAL=?
498 +Example 151
499 +)))
500 +)))
517 517  
518 -[[image:image-20220607171149-4.png]]
519 519  
520 -
521 521  (% style="color:#037691" %)**Calibration Payload**
522 522  
523 -(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
524 -|(((
525 -**Size**
526 -
527 -**(bytes)**
528 -)))|**1**|**1**|**1**|**7**|**1**
529 -|**Value**|(((
530 -PH4
531 -
532 -Calibrate value
505 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
506 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
507 +**Size(bytes)**
508 +)))|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**7**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**
509 +|Value|(((
510 +PH4 Calibrate value
533 533  )))|PH6.86 Calibrate value|(((
534 -PH9.18
535 -
536 -Calibrate value
512 +PH9.18 Calibrate value
537 537  )))|Reserve|(((
538 -[[Message Type>>path:#H2.3.6MessageType]]
539 -
514 +[[Message Type>>||anchor="H2.3.6MessageType"]]
540 540  Always 0x03
541 541  )))
542 542  
518 +
543 543  User can also send 0x14 downlink command to poll the current calibration payload.
544 544  
545 -[[image:image-20220607171416-7.jpeg]]
521 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:480px" %)
522 +|=(% style="width: 183px; background-color:#D9E2F3;color:#0070C0" %)**Downlink Control Type**|=(% style="width: 55px; background-color:#D9E2F3;color:#0070C0" %)FPort|=(% style="width: 93px; background-color:#D9E2F3;color:#0070C0" %)**Type Code**|=(% style="width: 146px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Downlink payload size(bytes)**
523 +|(% style="width:183px" %)Get Calibration Version Info|(% style="width:55px" %)Any|(% style="width:93px" %)14|(% style="width:146px" %)2
546 546  
547 -
548 548  * Reply to the confirmation package: 14 01
549 549  * Reply to non-confirmed packet: 14 00
550 550  
... ... @@ -552,6 +552,7 @@
552 552  
553 553  == 2.8 Frequency Plans ==
554 554  
532 +
555 555  (((
556 556  The LSPH01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
557 557  )))
... ... @@ -559,37 +559,67 @@
559 559  
560 560  === 2.8.1 EU863-870 (EU868) ===
561 561  
540 +
541 +(((
562 562  (% style="color:blue" %)**Uplink:**
543 +)))
563 563  
545 +(((
564 564  868.1 - SF7BW125 to SF12BW125
547 +)))
565 565  
549 +(((
566 566  868.3 - SF7BW125 to SF12BW125 and SF7BW250
551 +)))
567 567  
553 +(((
568 568  868.5 - SF7BW125 to SF12BW125
555 +)))
569 569  
557 +(((
570 570  867.1 - SF7BW125 to SF12BW125
559 +)))
571 571  
561 +(((
572 572  867.3 - SF7BW125 to SF12BW125
563 +)))
573 573  
565 +(((
574 574  867.5 - SF7BW125 to SF12BW125
567 +)))
575 575  
569 +(((
576 576  867.7 - SF7BW125 to SF12BW125
571 +)))
577 577  
573 +(((
578 578  867.9 - SF7BW125 to SF12BW125
575 +)))
579 579  
577 +(((
580 580  868.8 - FSK
579 +)))
581 581  
581 +(((
582 +
583 +)))
582 582  
585 +(((
583 583  (% style="color:blue" %)**Downlink:**
587 +)))
584 584  
589 +(((
585 585  Uplink channels 1-9 (RX1)
591 +)))
586 586  
593 +(((
587 587  869.525 - SF9BW125 (RX2 downlink only)
595 +)))
588 588  
589 589  
590 -
591 591  === 2.8.2 US902-928(US915) ===
592 592  
600 +
593 593  (((
594 594  Used in USA, Canada and South America. Frequency band as per definition in LoRaWAN 1.0.3 Regional document.
595 595  )))
... ... @@ -603,58 +603,101 @@
603 603  )))
604 604  
605 605  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
606 -* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
614 +* Use the Join successful sub-band if the server doesn't include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
607 607  
608 608  
609 609  
610 -
611 611  === 2.8.3 CN470-510 (CN470) ===
612 612  
620 +
621 +(((
613 613  Used in China, Default use CHE=1
623 +)))
614 614  
625 +(((
615 615  (% style="color:blue" %)**Uplink:**
627 +)))
616 616  
629 +(((
617 617  486.3 - SF7BW125 to SF12BW125
631 +)))
618 618  
633 +(((
619 619  486.5 - SF7BW125 to SF12BW125
635 +)))
620 620  
637 +(((
621 621  486.7 - SF7BW125 to SF12BW125
639 +)))
622 622  
641 +(((
623 623  486.9 - SF7BW125 to SF12BW125
643 +)))
624 624  
645 +(((
625 625  487.1 - SF7BW125 to SF12BW125
647 +)))
626 626  
649 +(((
627 627  487.3 - SF7BW125 to SF12BW125
651 +)))
628 628  
653 +(((
629 629  487.5 - SF7BW125 to SF12BW125
655 +)))
630 630  
657 +(((
631 631  487.7 - SF7BW125 to SF12BW125
659 +)))
632 632  
661 +(((
662 +
663 +)))
633 633  
665 +(((
634 634  (% style="color:blue" %)**Downlink:**
667 +)))
635 635  
669 +(((
636 636  506.7 - SF7BW125 to SF12BW125
671 +)))
637 637  
673 +(((
638 638  506.9 - SF7BW125 to SF12BW125
675 +)))
639 639  
677 +(((
640 640  507.1 - SF7BW125 to SF12BW125
679 +)))
641 641  
681 +(((
642 642  507.3 - SF7BW125 to SF12BW125
683 +)))
643 643  
685 +(((
644 644  507.5 - SF7BW125 to SF12BW125
687 +)))
645 645  
689 +(((
646 646  507.7 - SF7BW125 to SF12BW125
691 +)))
647 647  
693 +(((
648 648  507.9 - SF7BW125 to SF12BW125
695 +)))
649 649  
697 +(((
650 650  508.1 - SF7BW125 to SF12BW125
699 +)))
651 651  
701 +(((
652 652  505.3 - SF12BW125 (RX2 downlink only)
703 +)))
653 653  
654 654  
655 -
656 656  === 2.8.4 AU915-928(AU915) ===
657 657  
708 +
658 658  (((
659 659  Frequency band as per definition in LoRaWAN 1.0.3 Regional document.
660 660  )))
... ... @@ -672,11 +672,13 @@
672 672  )))
673 673  
674 674  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
675 -* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
726 +* Use the Join successful sub-band if the server doesn't include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
676 676  
677 677  
729 +
678 678  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
679 679  
732 +
680 680  (((
681 681  (% style="color:blue" %)**Default Uplink channel:**
682 682  )))
... ... @@ -782,64 +782,117 @@
782 782  )))
783 783  
784 784  
785 -
786 786  === 2.8.6 KR920-923 (KR920) ===
787 787  
840 +
841 +(((
788 788  (% style="color:blue" %)**Default channel:**
843 +)))
789 789  
845 +(((
790 790  922.1 - SF7BW125 to SF12BW125
847 +)))
791 791  
849 +(((
792 792  922.3 - SF7BW125 to SF12BW125
851 +)))
793 793  
853 +(((
794 794  922.5 - SF7BW125 to SF12BW125
855 +)))
795 795  
857 +(((
858 +
859 +)))
796 796  
861 +(((
797 797  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
863 +)))
798 798  
865 +(((
799 799  922.1 - SF7BW125 to SF12BW125
867 +)))
800 800  
869 +(((
801 801  922.3 - SF7BW125 to SF12BW125
871 +)))
802 802  
873 +(((
803 803  922.5 - SF7BW125 to SF12BW125
875 +)))
804 804  
877 +(((
805 805  922.7 - SF7BW125 to SF12BW125
879 +)))
806 806  
881 +(((
807 807  922.9 - SF7BW125 to SF12BW125
883 +)))
808 808  
885 +(((
809 809  923.1 - SF7BW125 to SF12BW125
887 +)))
810 810  
889 +(((
811 811  923.3 - SF7BW125 to SF12BW125
891 +)))
812 812  
893 +(((
894 +
895 +)))
813 813  
897 +(((
814 814  (% style="color:blue" %)**Downlink:**
899 +)))
815 815  
901 +(((
816 816  Uplink channels 1-7(RX1)
903 +)))
817 817  
905 +(((
818 818  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
907 +)))
819 819  
820 820  
821 -
822 822  === 2.8.7 IN865-867 (IN865) ===
823 823  
912 +
913 +(((
824 824  (% style="color:blue" %)**Uplink:**
915 +)))
825 825  
917 +(((
826 826  865.0625 - SF7BW125 to SF12BW125
919 +)))
827 827  
921 +(((
828 828  865.4025 - SF7BW125 to SF12BW125
923 +)))
829 829  
925 +(((
830 830  865.9850 - SF7BW125 to SF12BW125
927 +)))
831 831  
929 +(((
930 +
931 +)))
832 832  
933 +(((
833 833  (% style="color:blue" %)**Downlink:**
935 +)))
834 834  
937 +(((
835 835  Uplink channels 1-3 (RX1)
939 +)))
836 836  
941 +(((
837 837  866.550 - SF10BW125 (RX2)
943 +)))
838 838  
839 839  
840 -
841 841  == 2.9 LED Indicator ==
842 842  
948 +
843 843  The LSPH01 has an internal LED which is to show the status of different state.
844 844  
845 845  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
... ... @@ -846,95 +846,168 @@
846 846  * Blink once when device transmit a packet.
847 847  
848 848  
955 +
849 849  == 2.10 ​Firmware Change Log ==
850 850  
851 851  
852 -**Firmware download link:**
959 +**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/xtm5tw37mewaw99/AAD0uy06odmreQQ7vMzZYVIGa?dl=0>>https://www.dropbox.com/sh/xtm5tw37mewaw99/AAD0uy06odmreQQ7vMzZYVIGa?dl=0]]
853 853  
854 -[[http:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
855 -
856 -
857 857  **Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>path:/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/]]
858 858  
859 859  
860 -
861 861  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
862 862  
966 +
967 +(((
863 863  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
969 +)))
864 864  
865 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
866 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
971 +* (((
972 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
973 +)))
974 +* (((
975 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
976 +)))
867 867  
978 +(((
868 868  There are two kinds of commands to configure LSPH01, they are:
980 +)))
869 869  
870 -* (% style="color:#4f81bd" %)** General Commands**.
982 +* (((
983 +(% style="color:#4f81bd" %)** General Commands**.
984 +)))
871 871  
986 +(((
872 872  These commands are to configure:
988 +)))
873 873  
874 -* General system settings like: uplink interval.
875 -* LoRaWAN protocol & radio related command.
990 +* (((
991 +General system settings like: uplink interval.
992 +)))
993 +* (((
994 +LoRaWAN protocol & radio related command.
995 +)))
876 876  
877 -They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
997 +(((
998 +They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki: [[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
999 +)))
878 878  
1001 +(((
1002 +
1003 +)))
879 879  
880 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
1005 +* (((
1006 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
1007 +)))
881 881  
1009 +(((
882 882  These commands only valid for LSPH01, as below:
1011 +)))
883 883  
884 884  
885 -
886 886  == 3.1 Set Transmit Interval Time ==
887 887  
1016 +
888 888  Feature: Change LoRaWAN End Node Transmit Interval.
889 889  
890 890  (% style="color:#037691" %)**AT Command: AT+TDC**
891 891  
892 -[[image:image-20220607171554-8.png]]
1021 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1022 +|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response**
1023 +|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
1024 +30000
1025 +OK
1026 +the interval is 30000ms = 30s
1027 +)))
1028 +|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((
1029 +OK
1030 +Set transmit interval to 60000ms = 60 seconds​
1031 +)))
893 893  
894 -
895 -
1033 +(((
896 896  (% style="color:#037691" %)**Downlink Command: 0x01**
1035 +)))
897 897  
1037 +(((
898 898  Format: Command Code (0x01) followed by 3 bytes time value.
1039 +)))
899 899  
900 -If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1041 +(((
1042 +If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
1043 +)))
901 901  
902 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
903 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1045 +* (((
1046 +Example 1: Downlink Payload: 0100001E  ~/~/ Set Transmit Interval (TDC) = 30 seconds
1047 +)))
1048 +* (((
1049 +Example 2: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
904 904  
905 905  
1052 +
1053 +)))
906 906  
907 907  == 3.2 Set Interrupt Mode ==
908 908  
1057 +
909 909  Feature, Set Interrupt mode for GPIO_EXIT.
910 910  
911 911  (% style="color:#037691" %)**AT Command: AT+INTMOD**
912 912  
913 -[[image:image-20220607171716-9.png]]
1062 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1063 +|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1064 +|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
1065 +0
1066 +OK
1067 +the mode is 0 =No interruption
1068 +)))
1069 +|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
1070 +Set Transmit Interval
1071 +0. (Disable Interrupt),
1072 +~1. (Trigger by rising and falling edge)
1073 +2. (Trigger by falling edge)
1074 +3. (Trigger by rising edge)
1075 +)))|(% style="width:157px" %)OK
914 914  
915 -
1077 +(((
916 916  (% style="color:#037691" %)**Downlink Command: 0x06**
1079 +)))
917 917  
1081 +(((
918 918  Format: Command Code (0x06) followed by 3 bytes.
1083 +)))
919 919  
1085 +(((
920 920  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1087 +)))
921 921  
922 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
923 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1089 +* (((
1090 +Example 1: Downlink Payload: 06000000  ~/~/ Turn off interrupt mode
1091 +)))
1092 +* (((
1093 +Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
1094 +)))
924 924  
1096 +(((
1097 +
1098 +)))
1099 +
1100 +
925 925  == 3.3 Calibrate Sensor ==
926 926  
927 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
928 928  
1104 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
929 929  
930 930  
931 931  == 3.4 Get Firmware Version Info ==
932 932  
1109 +
933 933  Feature: use downlink to get firmware version.
934 934  
935 935  (% style="color:#037691" %)**Downlink Command: 0x26**
936 936  
937 -[[image:image-20220607171917-10.png]]
1114 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
1115 +|(% style="background-color:#d9e2f3; color:#0070c0; width:193px" %)**Downlink Control Type**|(% style="background-color:#d9e2f3; color:#0070c0; width:57px" %)**FPort**|(% style="background-color:#d9e2f3; color:#0070c0; width:91px" %)**Type Code**|(% style="background-color:#d9e2f3; color:#0070c0; width:159px" %)**Downlink payload size(bytes)**
1116 +|(% style="width:193px" %)Get Firmware Version Info|(% style="width:57px" %)Any|(% style="width:91px" %)26|(% style="width:149px" %)2
938 938  
939 939  * Reply to the confirmation package: 26 01
940 940  * Reply to non-confirmed packet: 26 00
... ... @@ -943,28 +943,23 @@
943 943  
944 944  Configures info payload:
945 945  
946 -(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
947 -|=(((
948 -**Size(bytes)**
949 -)))|=**1**|=**1**|=**1**|=**1**|=**1**|=**5**|=**1**
950 -|**Value**|Software Type|(((
1125 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
1126 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**5**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**
1127 +|Value|Software Type|(((
951 951  Frequency
952 -
953 953  Band
954 954  )))|Sub-band|(((
955 955  Firmware
956 -
957 957  Version
958 958  )))|Sensor Type|Reserve|(((
959 -[[Message Type>>path:#H2.3.6MessageType]]
1134 +[[Message Type>>||anchor="H2.3.6MessageType"]]
960 960  Always 0x02
961 961  )))
962 962  
963 -**Software Type**: Always 0x03 for LSPH01
1138 +(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LSPH01
964 964  
1140 +(% style="color:#037691" %)**Frequency Band**:
965 965  
966 -**Frequency Band**:
967 -
968 968  *0x01: EU868
969 969  
970 970  *0x02: US915
... ... @@ -986,14 +986,12 @@
986 986  *0xa0: AS923-3
987 987  
988 988  
989 -**Sub-Band**: value 0x00 ~~ 0x08
1163 +(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
990 990  
1165 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
991 991  
992 -**Firmware Version**: 0x0100, Means: v1.0.0 version
1167 +(% style="color:#037691" %)**Sensor Type**:
993 993  
994 -
995 -**Sensor Type**:
996 -
997 997  0x01: LSE01
998 998  
999 999  0x02: LDDS75
... ... @@ -1009,107 +1009,25 @@
1009 1009  0x07: LDDS12
1010 1010  
1011 1011  
1184 += 4. Battery & Power Consumption =
1012 1012  
1013 -= 4. Battery & How to replace =
1014 1014  
1015 -== 4.1 Battery Type ==
1187 +LSPH01 uses ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1016 1016  
1017 -(((
1018 -LSPH01 is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.
1019 -)))
1189 +[[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1020 1020  
1021 -(((
1022 -The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1023 -)))
1024 1024  
1025 -[[image:1654593587246-335.png]]
1026 -
1027 -
1028 -Minimum Working Voltage for the LSPH01:
1029 -
1030 -LSPH01:  2.45v ~~ 3.6v
1031 -
1032 -
1033 -
1034 -== 4.2 Replace Battery ==
1035 -
1036 -(((
1037 -Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.
1038 -)))
1039 -
1040 -(((
1041 -And make sure the positive and negative pins match.
1042 -)))
1043 -
1044 -
1045 -
1046 -== 4.3 Power Consumption Analyze ==
1047 -
1048 -(((
1049 -Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
1050 -)))
1051 -
1052 -(((
1053 -Instruction to use as below:
1054 -)))
1055 -
1056 -
1057 -**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
1058 -
1059 -[[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
1060 -
1061 -
1062 -**Step 2**: Open it and choose
1063 -
1064 -* Product Model
1065 -* Uplink Interval
1066 -* Working Mode
1067 -
1068 -And the Life expectation in difference case will be shown on the right.
1069 -
1070 -[[image:1654593605679-189.png]]
1071 -
1072 -
1073 -The battery related documents as below:
1074 -
1075 -* (((
1076 -[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
1077 -)))
1078 -* (((
1079 -[[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
1080 -)))
1081 -* (((
1082 -[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
1083 -)))
1084 -
1085 -[[image:image-20220607172042-11.png]]
1086 -
1087 -
1088 -
1089 -=== 4.3.1 ​Battery Note ===
1090 -
1091 -(((
1092 -The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
1093 -)))
1094 -
1095 -
1096 -
1097 -=== ​4.3.2 Replace the battery ===
1098 -
1099 -You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1100 -
1101 -The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1102 -
1103 -
1104 -
1105 1105  = 5. Use AT Command =
1106 1106  
1107 1107  == 5.1 Access AT Commands ==
1108 1108  
1196 +
1109 1109  LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.
1110 1110  
1199 +
1111 1111  [[image:1654593668970-604.png]]
1112 1112  
1202 +
1113 1113  **Connection:**
1114 1114  
1115 1115  (% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
... ... @@ -1119,34 +1119,36 @@
1119 1119  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1120 1120  
1121 1121  
1212 +(((
1122 1122  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1214 +)))
1123 1123  
1124 1124  
1125 1125   [[image:1654593712276-618.png]]
1126 1126  
1127 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1219 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1128 1128  
1129 1129  
1130 -
1131 1131  = 6. FAQ =
1132 1132  
1133 1133  == 6.1 How to change the LoRa Frequency Bands/Region ==
1134 1134  
1135 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1226 +
1227 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1136 1136  When downloading the images, choose the required image file for download. ​
1137 1137  
1138 1138  
1139 -
1140 1140  = 7. Trouble Shooting =
1141 1141  
1142 -== 7.1 AT Commands input doesn’t work ==
1233 +== 7.1 AT Commands input doesn't work ==
1143 1143  
1144 -In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1145 1145  
1236 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1146 1146  
1147 1147  
1148 1148  = 8. Order Info =
1149 1149  
1241 +
1150 1150  Part Number: (% style="color:blue" %)**LSPH01-XX**
1151 1151  
1152 1152  
... ... @@ -1161,6 +1161,8 @@
1161 1161  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1162 1162  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1163 1163  
1256 +
1257 +
1164 1164  = 9. ​Packing Info =
1165 1165  
1166 1166  
... ... @@ -1175,9 +1175,10 @@
1175 1175  * Package Size / pcs : cm
1176 1176  * Weight / pcs : g
1177 1177  
1272 +
1273 +
1178 1178  = 10. ​Support =
1179 1179  
1276 +
1180 1180  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1181 1181  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]].
1182 -
1183 -
image-20220610105907-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +15.5 KB
Content
image-20230426084737-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +190.0 KB
Content