Skip to Content
Last modified by Xiaoling on 2025/04/25 14:08
From version 74.8
edited by Xiaoling
on 2022/06/07 17:50
Change comment: There is no comment for this version
To version 92.3
edited by Xiaoling
on 2022/06/25 17:05
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -4,74 +4,31 @@
4 4  
5 5  
6 6  
7 -**Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 65  
66 66  
12 +**Table of Contents:**
67 67  
14 +{{toc/}}
68 68  
69 69  
17 +
18 +
19 +
20 +
21 +
22 +
23 +
24 +
70 70  = 1. Introduction =
71 71  
72 72  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
73 73  
74 74  (((
30 +
31 +
75 75  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
76 76  )))
77 77  
... ... @@ -96,6 +96,7 @@
96 96  
97 97  
98 98  
56 +
99 99  == ​1.2 Features ==
100 100  
101 101  * LoRaWAN 1.0.3 Class A
... ... @@ -113,6 +113,7 @@
113 113  * 8500mAh Battery for long term use
114 114  
115 115  
74 +
116 116  == 1.3 Probe Specification ==
117 117  
118 118  
... ... @@ -134,11 +134,13 @@
134 134  * Length: 3.5 meters
135 135  
136 136  
96 +
137 137  == 1.4 ​Applications ==
138 138  
139 139  * Smart Agriculture
140 140  
141 141  
102 +
142 142  == 1.5 Pin mapping and power on ==
143 143  
144 144  [[image:1654592472094-134.png]]
... ... @@ -154,7 +154,7 @@
154 154  )))
155 155  
156 156  (((
157 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
118 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
158 158  )))
159 159  
160 160  
... ... @@ -166,10 +166,14 @@
166 166  
167 167  (((
168 168  [[image:1654592492399-921.png]]
130 +
131 +
169 169  )))
170 170  
171 171  (((
172 172  The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
136 +
137 +
173 173  )))
174 174  
175 175  (((
... ... @@ -193,11 +193,13 @@
193 193  [[image:1654592600093-601.png]]
194 194  
195 195  
161 +
196 196  **Add APP EUI and DEV EUI**
197 197  
198 198  [[image:1654592619856-881.png]]
199 199  
200 200  
167 +
201 201  **Add APP EUI in the application**
202 202  
203 203  [[image:1654592632656-512.png]]
... ... @@ -240,19 +240,17 @@
240 240  )))
241 241  
242 242  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
243 -|(((
244 -**Size**
210 +|=(% style="width: 62.5px;" %)(((
211 +**Size (bytes)**
212 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
213 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
214 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
245 245  
246 -**(bytes)**
247 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
248 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
249 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
250 -
251 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
252 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
253 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
216 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
217 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
218 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
254 254  )))|Reserve|(((
255 -[[Message Type>>path:#H2.3.6MessageType]]
220 +[[Message Type>>||anchor="H2.3.6MessageType"]]
256 256  )))
257 257  
258 258  [[image:1654592721645-318.png]]
... ... @@ -308,7 +308,7 @@
308 308  
309 309  === 2.3.5 Interrupt Pin ===
310 310  
311 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
276 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
312 312  
313 313  
314 314  **Example:**
... ... @@ -330,11 +330,11 @@
330 330  )))
331 331  
332 332  
333 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
334 -|=**Message Type Code**|=**Description**|=**Payload**
335 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
336 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
337 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
298 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
299 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
300 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
301 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
302 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
338 338  
339 339  
340 340  
... ... @@ -357,7 +357,7 @@
357 357  
358 358  == 2.4 Uplink Interval ==
359 359  
360 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
325 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
361 361  
362 362  
363 363  
... ... @@ -521,11 +521,9 @@
521 521  (% style="color:#037691" %)**Calibration Payload**
522 522  
523 523  (% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
524 -|(((
525 -**Size**
526 -
527 -**(bytes)**
528 -)))|**1**|**1**|**1**|**7**|**1**
489 +|=(% style="width: 62.5px;" %)(((
490 +**Size (bytes)**
491 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
529 529  |**Value**|(((
530 530  PH4
531 531  
... ... @@ -535,7 +535,7 @@
535 535  
536 536  Calibrate value
537 537  )))|Reserve|(((
538 -[[Message Type>>path:#H2.3.6MessageType]]
501 +[[Message Type>>||anchor="H2.3.6MessageType"]]
539 539  
540 540  Always 0x03
541 541  )))
... ... @@ -550,6 +550,8 @@
550 550  
551 551  
552 552  
516 +
517 +
553 553  == 2.8 Frequency Plans ==
554 554  
555 555  (((
... ... @@ -559,32 +559,61 @@
559 559  
560 560  === 2.8.1 EU863-870 (EU868) ===
561 561  
527 +(((
562 562  (% style="color:blue" %)**Uplink:**
529 +)))
563 563  
531 +(((
564 564  868.1 - SF7BW125 to SF12BW125
533 +)))
565 565  
535 +(((
566 566  868.3 - SF7BW125 to SF12BW125 and SF7BW250
537 +)))
567 567  
539 +(((
568 568  868.5 - SF7BW125 to SF12BW125
541 +)))
569 569  
543 +(((
570 570  867.1 - SF7BW125 to SF12BW125
545 +)))
571 571  
547 +(((
572 572  867.3 - SF7BW125 to SF12BW125
549 +)))
573 573  
551 +(((
574 574  867.5 - SF7BW125 to SF12BW125
553 +)))
575 575  
555 +(((
576 576  867.7 - SF7BW125 to SF12BW125
557 +)))
577 577  
559 +(((
578 578  867.9 - SF7BW125 to SF12BW125
561 +)))
579 579  
563 +(((
580 580  868.8 - FSK
565 +)))
581 581  
567 +(((
568 +
569 +)))
582 582  
571 +(((
583 583  (% style="color:blue" %)**Downlink:**
573 +)))
584 584  
575 +(((
585 585  Uplink channels 1-9 (RX1)
577 +)))
586 586  
579 +(((
587 587  869.525 - SF9BW125 (RX2 downlink only)
581 +)))
588 588  
589 589  
590 590  
... ... @@ -607,49 +607,91 @@
607 607  
608 608  
609 609  
610 -
611 611  === 2.8.3 CN470-510 (CN470) ===
612 612  
606 +(((
613 613  Used in China, Default use CHE=1
608 +)))
614 614  
610 +(((
615 615  (% style="color:blue" %)**Uplink:**
612 +)))
616 616  
614 +(((
617 617  486.3 - SF7BW125 to SF12BW125
616 +)))
618 618  
618 +(((
619 619  486.5 - SF7BW125 to SF12BW125
620 +)))
620 620  
622 +(((
621 621  486.7 - SF7BW125 to SF12BW125
624 +)))
622 622  
626 +(((
623 623  486.9 - SF7BW125 to SF12BW125
628 +)))
624 624  
630 +(((
625 625  487.1 - SF7BW125 to SF12BW125
632 +)))
626 626  
634 +(((
627 627  487.3 - SF7BW125 to SF12BW125
636 +)))
628 628  
638 +(((
629 629  487.5 - SF7BW125 to SF12BW125
640 +)))
630 630  
642 +(((
631 631  487.7 - SF7BW125 to SF12BW125
644 +)))
632 632  
646 +(((
647 +
648 +)))
633 633  
650 +(((
634 634  (% style="color:blue" %)**Downlink:**
652 +)))
635 635  
654 +(((
636 636  506.7 - SF7BW125 to SF12BW125
656 +)))
637 637  
658 +(((
638 638  506.9 - SF7BW125 to SF12BW125
660 +)))
639 639  
662 +(((
640 640  507.1 - SF7BW125 to SF12BW125
664 +)))
641 641  
666 +(((
642 642  507.3 - SF7BW125 to SF12BW125
668 +)))
643 643  
670 +(((
644 644  507.5 - SF7BW125 to SF12BW125
672 +)))
645 645  
674 +(((
646 646  507.7 - SF7BW125 to SF12BW125
676 +)))
647 647  
678 +(((
648 648  507.9 - SF7BW125 to SF12BW125
680 +)))
649 649  
682 +(((
650 650  508.1 - SF7BW125 to SF12BW125
684 +)))
651 651  
686 +(((
652 652  505.3 - SF12BW125 (RX2 downlink only)
688 +)))
653 653  
654 654  
655 655  
... ... @@ -675,110 +675,220 @@
675 675  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
676 676  
677 677  
714 +
678 678  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
679 679  
717 +(((
680 680  (% style="color:blue" %)**Default Uplink channel:**
719 +)))
681 681  
721 +(((
682 682  923.2 - SF7BW125 to SF10BW125
723 +)))
683 683  
725 +(((
684 684  923.4 - SF7BW125 to SF10BW125
727 +)))
685 685  
729 +(((
730 +
731 +)))
686 686  
733 +(((
687 687  (% style="color:blue" %)**Additional Uplink Channel**:
735 +)))
688 688  
737 +(((
689 689  (OTAA mode, channel added by JoinAccept message)
739 +)))
690 690  
741 +(((
742 +
743 +)))
691 691  
745 +(((
692 692  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
747 +)))
693 693  
749 +(((
694 694  922.2 - SF7BW125 to SF10BW125
751 +)))
695 695  
753 +(((
696 696  922.4 - SF7BW125 to SF10BW125
755 +)))
697 697  
757 +(((
698 698  922.6 - SF7BW125 to SF10BW125
759 +)))
699 699  
761 +(((
700 700  922.8 - SF7BW125 to SF10BW125
763 +)))
701 701  
765 +(((
702 702  923.0 - SF7BW125 to SF10BW125
767 +)))
703 703  
769 +(((
704 704  922.0 - SF7BW125 to SF10BW125
771 +)))
705 705  
773 +(((
774 +
775 +)))
706 706  
777 +(((
707 707  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
779 +)))
708 708  
781 +(((
709 709  923.6 - SF7BW125 to SF10BW125
783 +)))
710 710  
785 +(((
711 711  923.8 - SF7BW125 to SF10BW125
787 +)))
712 712  
789 +(((
713 713  924.0 - SF7BW125 to SF10BW125
791 +)))
714 714  
793 +(((
715 715  924.2 - SF7BW125 to SF10BW125
795 +)))
716 716  
797 +(((
717 717  924.4 - SF7BW125 to SF10BW125
799 +)))
718 718  
801 +(((
719 719  924.6 - SF7BW125 to SF10BW125
803 +)))
720 720  
805 +(((
806 +
807 +)))
721 721  
809 +(((
722 722  (% style="color:blue" %)**Downlink:**
811 +)))
723 723  
813 +(((
724 724  Uplink channels 1-8 (RX1)
815 +)))
725 725  
817 +(((
726 726  923.2 - SF10BW125 (RX2)
819 +)))
727 727  
728 728  
729 729  
730 730  === 2.8.6 KR920-923 (KR920) ===
731 731  
825 +(((
732 732  (% style="color:blue" %)**Default channel:**
827 +)))
733 733  
829 +(((
734 734  922.1 - SF7BW125 to SF12BW125
831 +)))
735 735  
833 +(((
736 736  922.3 - SF7BW125 to SF12BW125
835 +)))
737 737  
837 +(((
738 738  922.5 - SF7BW125 to SF12BW125
839 +)))
739 739  
841 +(((
842 +
843 +)))
740 740  
845 +(((
741 741  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
847 +)))
742 742  
849 +(((
743 743  922.1 - SF7BW125 to SF12BW125
851 +)))
744 744  
853 +(((
745 745  922.3 - SF7BW125 to SF12BW125
855 +)))
746 746  
857 +(((
747 747  922.5 - SF7BW125 to SF12BW125
859 +)))
748 748  
861 +(((
749 749  922.7 - SF7BW125 to SF12BW125
863 +)))
750 750  
865 +(((
751 751  922.9 - SF7BW125 to SF12BW125
867 +)))
752 752  
869 +(((
753 753  923.1 - SF7BW125 to SF12BW125
871 +)))
754 754  
873 +(((
755 755  923.3 - SF7BW125 to SF12BW125
875 +)))
756 756  
877 +(((
878 +
879 +)))
757 757  
881 +(((
758 758  (% style="color:blue" %)**Downlink:**
883 +)))
759 759  
885 +(((
760 760  Uplink channels 1-7(RX1)
887 +)))
761 761  
889 +(((
762 762  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
891 +)))
763 763  
764 764  
765 765  
766 766  === 2.8.7 IN865-867 (IN865) ===
767 767  
897 +(((
768 768  (% style="color:blue" %)**Uplink:**
899 +)))
769 769  
901 +(((
770 770  865.0625 - SF7BW125 to SF12BW125
903 +)))
771 771  
905 +(((
772 772  865.4025 - SF7BW125 to SF12BW125
907 +)))
773 773  
909 +(((
774 774  865.9850 - SF7BW125 to SF12BW125
911 +)))
775 775  
913 +(((
914 +
915 +)))
776 776  
917 +(((
777 777  (% style="color:blue" %)**Downlink:**
919 +)))
778 778  
921 +(((
779 779  Uplink channels 1-3 (RX1)
923 +)))
780 780  
925 +(((
781 781  866.550 - SF10BW125 (RX2)
927 +)))
782 782  
783 783  
784 784  
... ... @@ -790,6 +790,7 @@
790 790  * Blink once when device transmit a packet.
791 791  
792 792  
939 +
793 793  == 2.10 ​Firmware Change Log ==
794 794  
795 795  
... ... @@ -804,26 +804,51 @@
804 804  
805 805  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
806 806  
954 +(((
807 807  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
956 +)))
808 808  
809 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
810 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
958 +* (((
959 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
960 +)))
961 +* (((
962 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
963 +)))
811 811  
965 +(((
812 812  There are two kinds of commands to configure LSPH01, they are:
967 +)))
813 813  
814 -* (% style="color:#4f81bd" %)** General Commands**.
969 +* (((
970 +(% style="color:#4f81bd" %)** General Commands**.
971 +)))
815 815  
973 +(((
816 816  These commands are to configure:
975 +)))
817 817  
818 -* General system settings like: uplink interval.
819 -* LoRaWAN protocol & radio related command.
977 +* (((
978 +General system settings like: uplink interval.
979 +)))
980 +* (((
981 +LoRaWAN protocol & radio related command.
982 +)))
820 820  
984 +(((
821 821  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
986 +)))
822 822  
988 +(((
989 +
990 +)))
823 823  
824 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
992 +* (((
993 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
994 +)))
825 825  
996 +(((
826 826  These commands only valid for LSPH01, as below:
998 +)))
827 827  
828 828  
829 829  
... ... @@ -836,17 +836,27 @@
836 836  [[image:image-20220607171554-8.png]]
837 837  
838 838  
839 -
1011 +(((
840 840  (% style="color:#037691" %)**Downlink Command: 0x01**
1013 +)))
841 841  
1015 +(((
842 842  Format: Command Code (0x01) followed by 3 bytes time value.
1017 +)))
843 843  
1019 +(((
844 844  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1021 +)))
845 845  
846 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
847 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1023 +* (((
1024 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1025 +)))
1026 +* (((
1027 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
848 848  
849 849  
1030 +
1031 +)))
850 850  
851 851  == 3.2 Set Interrupt Mode ==
852 852  
... ... @@ -854,21 +854,37 @@
854 854  
855 855  (% style="color:#037691" %)**AT Command: AT+INTMOD**
856 856  
857 -[[image:image-20220607171716-9.png]]
1039 +[[image:image-20220610105907-1.png]]
858 858  
859 859  
1042 +(((
860 860  (% style="color:#037691" %)**Downlink Command: 0x06**
1044 +)))
861 861  
1046 +(((
862 862  Format: Command Code (0x06) followed by 3 bytes.
1048 +)))
863 863  
1050 +(((
864 864  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1052 +)))
865 865  
866 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
867 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1054 +* (((
1055 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1056 +)))
1057 +* (((
1058 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1059 +)))
868 868  
1061 +(((
1062 +
1063 +)))
1064 +
1065 +
1066 +
869 869  == 3.3 Calibrate Sensor ==
870 870  
871 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1069 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
872 872  
873 873  
874 874  
... ... @@ -900,14 +900,14 @@
900 900  
901 901  Version
902 902  )))|Sensor Type|Reserve|(((
903 -[[Message Type>>path:#H2.3.6MessageType]]
1101 +[[Message Type>>||anchor="H2.3.6MessageType"]]
904 904  Always 0x02
905 905  )))
906 906  
907 -**Software Type**: Always 0x03 for LSPH01
1105 +(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LSPH01
908 908  
909 909  
910 -**Frequency Band**:
1108 +(% style="color:#037691" %)**Frequency Band**:
911 911  
912 912  *0x01: EU868
913 913  
... ... @@ -930,13 +930,13 @@
930 930  *0xa0: AS923-3
931 931  
932 932  
933 -**Sub-Band**: value 0x00 ~~ 0x08
1131 +(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
934 934  
935 935  
936 -**Firmware Version**: 0x0100, Means: v1.0.0 version
1134 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
937 937  
938 938  
939 -**Sensor Type**:
1137 +(% style="color:#037691" %)**Sensor Type**:
940 940  
941 941  0x01: LSE01
942 942  
... ... @@ -963,7 +963,7 @@
963 963  )))
964 964  
965 965  (((
966 -The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1164 +The discharge curve is not linear so can't simply use percentage to show the battery level. Below is the battery performance.
967 967  )))
968 968  
969 969  [[image:1654593587246-335.png]]
... ... @@ -998,12 +998,12 @@
998 998  )))
999 999  
1000 1000  
1001 -**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
1199 +(% style="color:#037691" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
1002 1002  
1003 1003  [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
1004 1004  
1005 1005  
1006 -**Step 2**: Open it and choose
1204 +(% style="color:#037691" %)**Step 2**(%%): Open it and choose
1007 1007  
1008 1008  * Product Model
1009 1009  * Uplink Interval
... ... @@ -1017,13 +1017,13 @@
1017 1017  The battery related documents as below:
1018 1018  
1019 1019  * (((
1020 -[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
1218 +[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
1021 1021  )))
1022 1022  * (((
1023 1023  [[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
1024 1024  )))
1025 1025  * (((
1026 -[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
1224 +[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
1027 1027  )))
1028 1028  
1029 1029  [[image:image-20220607172042-11.png]]
... ... @@ -1040,9 +1040,13 @@
1040 1040  
1041 1041  === ​4.3.2 Replace the battery ===
1042 1042  
1043 -You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1241 +(((
1242 +You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
1243 +)))
1044 1044  
1245 +(((
1045 1045  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1247 +)))
1046 1046  
1047 1047  
1048 1048  
... ... @@ -1063,29 +1063,29 @@
1063 1063  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1064 1064  
1065 1065  
1268 +(((
1066 1066  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1270 +)))
1067 1067  
1068 1068  
1069 1069   [[image:1654593712276-618.png]]
1070 1070  
1071 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1275 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1072 1072  
1073 1073  
1074 -
1075 1075  = 6. FAQ =
1076 1076  
1077 1077  == 6.1 How to change the LoRa Frequency Bands/Region ==
1078 1078  
1079 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1282 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1080 1080  When downloading the images, choose the required image file for download. ​
1081 1081  
1082 1082  
1083 -
1084 1084  = 7. Trouble Shooting =
1085 1085  
1086 -== 7.1 AT Commands input doesn’t work ==
1288 +== 7.1 AT Commands input doesn't work ==
1087 1087  
1088 -In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1290 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1089 1089  
1090 1090  
1091 1091  
image-20220610105907-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +15.5 KB
Content