Changes for page LSPH01 -- LoRaWAN Soil pH Sensor User Manual

Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 1 added, 0 removed)
  • image-20220610105907-1.png

Details

Page properties

Content

...	...	@@ -4,62 +4,7 @@
4	4
5	5
6	6
7		-**Contents:**
8	8
9		-* [[1. Introduction>>path:#H1.Introduction]]
10		-** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11		-** [[​1.2 Features>>path:#H200B1.2Features]]
12		-** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13		-** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14		-** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15		-* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16		-** [[2.1 How it works>>path:#H2.1Howitworks]]
17		-** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18		-** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19		-*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20		-*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21		-*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22		-*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23		-*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24		-*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25		-*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26		-** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27		-** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28		-** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29		-*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30		-*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31		-*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32		-** [[2.7 Calibration>>path:#H2.7Calibration]]
33		-** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34		-*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35		-*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36		-*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37		-*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38		-*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39		-*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40		-*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41		-** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42		-** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43		-* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44		-** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45		-** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46		-** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47		-** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48		-* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49		-** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50		-** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51		-** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52		-*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53		-*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54		-* [[5. Use AT Command>>path:#H5.UseATCommand]]
55		-** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56		-* [[6. FAQ>>path:#H6.FAQ]]
57		-** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58		-* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59		-** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60		-* [[8. Order Info>>path:#H8.OrderInfo]]
61		-* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62		-* [[10. ​Support>>path:#H10.A0200BSupport]]
63	63
64	64
65	65
...	...	@@ -67,11 +67,28 @@
67	67
68	68
69	69
	15	+
	16	+**Table of Contents:**
	17	+
	18	+{{toc/}}
	19	+
	20	+
	21	+
	22	+
	23	+
	24	+
	25	+
	26	+
	27	+
	28	+
70	70	= 1. Introduction =
71	71
	31	+
72	72	== 1.1 ​What is LoRaWAN Soil pH Sensor ==
73	73
74	74	(((
	35	+
	36	+
75	75	The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
76	76	)))
77	77
...	...	@@ -96,8 +96,10 @@
96	96
97	97
98	98
	61	+
99	99	== ​1.2 Features ==
100	100
	64	+
101	101	* LoRaWAN 1.0.3 Class A
102	102	* Ultra-low power consumption
103	103	* Monitor soil pH with temperature compensation.
...	...	@@ -113,6 +113,9 @@
113	113	* 8500mAh Battery for long term use
114	114
115	115
	80	+
	81	+
	82	+
116	116	== 1.3 Probe Specification ==
117	117
118	118
...	...	@@ -134,13 +134,20 @@
134	134	* Length: 3.5 meters
135	135
136	136
	104	+
	105	+
	106	+
137	137	== 1.4 ​Applications ==
138	138
	109	+
139	139	* Smart Agriculture
140	140
141	141
	113	+
	114	+
142	142	== 1.5 Pin mapping and power on ==
143	143
	117	+
144	144	[[image:1654592472094-134.png]]
145	145
146	146
...	...	@@ -147,19 +147,23 @@
147	147
148	148	= 2. Configure LSPH01 to connect to LoRaWAN network =
149	149
	124	+
150	150	== 2.1 How it works ==
151	151
	127	+
152	152	(((
153	153	The LSPH01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSPH01. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
154	154	)))
155	155
156	156	(((
157		-In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
	133	+In case you can't set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
158	158	)))
159	159
160	160
	137	+
161	161	== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
162	162
	140	+
163	163	(((
164	164	Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.
165	165	)))
...	...	@@ -166,10 +166,14 @@
166	166
167	167	(((
168	168	[[image:1654592492399-921.png]]
	147	+
	148	+
169	169	)))
170	170
171	171	(((
172	172	The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
	153	+
	154	+
173	173	)))
174	174
175	175	(((
...	...	@@ -193,11 +193,13 @@
193	193	[[image:1654592600093-601.png]]
194	194
195	195
	178	+
196	196	**Add APP EUI and DEV EUI**
197	197
198	198	[[image:1654592619856-881.png]]
199	199
200	200
	184	+
201	201	**Add APP EUI in the application**
202	202
203	203	[[image:1654592632656-512.png]]
...	...	@@ -219,6 +219,8 @@
219	219
220	220	(((
221	221	(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	206	+
	207	+
222	222	)))
223	223
224	224	[[image:1654592697690-910.png]]
...	...	@@ -227,6 +227,7 @@
227	227
228	228	== 2.3 ​Uplink Payload ==
229	229
	216	+
230	230	(((
231	231	LSPH01 will uplink payload via LoRaWAN with below payload format:
232	232	)))
...	...	@@ -240,19 +240,17 @@
240	240	)))
241	241
242	242	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
243		-|(((
244		-**Size**
	230	+|=(% style="width: 62.5px;" %)(((
	231	+**Size (bytes)**
	232	+)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
	233	+|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
	234	+[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
245	245
246		-**(bytes)**
247		-)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
248		-|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
249		-[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
250		-
251		-[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
252		-)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
253		-[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
	236	+[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
	237	+)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
	238	+[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
254	254	)))|Reserve|(((
255		-[[Message Type>>path:#H2.3.6MessageType]]
	240	+[[Message Type>>||anchor="H2.3.6MessageType"]]
256	256	)))
257	257
258	258	[[image:1654592721645-318.png]]
...	...	@@ -272,6 +272,7 @@
272	272
273	273	=== 2.3.2 DS18B20 Temperature sensor ===
274	274
	260	+
275	275	This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
276	276
277	277
...	...	@@ -285,6 +285,7 @@
285	285
286	286	=== 2.3.3 Soil pH ===
287	287
	274	+
288	288	Range: 0 ~~ 14 pH
289	289
290	290	**Example:**
...	...	@@ -295,6 +295,7 @@
295	295
296	296	=== 2.3.4 Soil Temperature ===
297	297
	285	+
298	298	Get Soil Temperature
299	299
300	300
...	...	@@ -308,9 +308,10 @@
308	308
309	309	=== 2.3.5 Interrupt Pin ===
310	310
311		-This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
312	312
	300	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
313	313
	302	+
314	314	**Example:**
315	315
316	316	0x00: Normal uplink packet.
...	...	@@ -321,6 +321,7 @@
321	321
322	322	=== 2.3.6 Message Type ===
323	323
	313	+
324	324	(((
325	325	For a normal uplink payload, the message type is always 0x01.
326	326	)))
...	...	@@ -330,14 +330,16 @@
330	330	)))
331	331
332	332
333		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
334		-|=**Message Type Code**|=**Description**|=**Payload**
335		-|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
336		-|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
337		-|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
	323	+(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
	324	+|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
	325	+|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
	326	+|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
	327	+|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
338	338
339	339
340	340
	331	+
	332	+
341	341	=== 2.3.7 Decode payload in The Things Network ===
342	342
343	343	While using TTN network, you can add the payload format to decode the payload.
...	...	@@ -350,7 +350,7 @@
350	350	)))
351	351
352	352	(((
353		-LSPH01 TTN Payload Decoder: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
	345	+LSPH01 TTN Payload Decoder:  [[https:~~/~~/www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0>>https://www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0]]
354	354	)))
355	355
356	356
...	...	@@ -357,12 +357,14 @@
357	357
358	358	== 2.4 Uplink Interval ==
359	359
360		-The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
361	361
	353	+The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
362	362
363	363
	356	+
364	364	== 2.5 ​Show Data in DataCake IoT Server ==
365	365
	359	+
366	366	(((
367	367	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
368	368	)))
...	...	@@ -405,7 +405,7 @@
405	405	)))
406	406
407	407	(((
408		-Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
	402	+Download Datacake decoder from: [[https:~~/~~/www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0>>url:https://www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0]]
409	409	)))
410	410
411	411
...	...	@@ -521,11 +521,9 @@
521	521	(% style="color:#037691" %)**Calibration Payload**
522	522
523	523	(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
524		-|(((
525		-**Size**
526		-
527		-**(bytes)**
528		-)))|**1**|**1**|**1**|**7**|**1**
	518	+|=(% style="width: 62.5px;" %)(((
	519	+**Size (bytes)**
	520	+)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
529	529	|**Value**|(((
530	530	PH4
531	531
...	...	@@ -535,7 +535,7 @@
535	535
536	536	Calibrate value
537	537	)))|Reserve|(((
538		-[[Message Type>>path:#H2.3.6MessageType]]
	530	+[[Message Type>>||anchor="H2.3.6MessageType"]]
539	539
540	540	Always 0x03
541	541	)))
...	...	@@ -549,7 +549,6 @@
549	549	* Reply to non-confirmed packet: 14 00
550	550
551	551
552		-
553	553	== 2.8 Frequency Plans ==
554	554
555	555	(((
...	...	@@ -559,32 +559,61 @@
559	559
560	560	=== 2.8.1 EU863-870 (EU868) ===
561	561
	553	+(((
562	562	(% style="color:blue" %)**Uplink:**
	555	+)))
563	563
	557	+(((
564	564	868.1 - SF7BW125 to SF12BW125
	559	+)))
565	565
	561	+(((
566	566	868.3 - SF7BW125 to SF12BW125 and SF7BW250
	563	+)))
567	567
	565	+(((
568	568	868.5 - SF7BW125 to SF12BW125
	567	+)))
569	569
	569	+(((
570	570	867.1 - SF7BW125 to SF12BW125
	571	+)))
571	571
	573	+(((
572	572	867.3 - SF7BW125 to SF12BW125
	575	+)))
573	573
	577	+(((
574	574	867.5 - SF7BW125 to SF12BW125
	579	+)))
575	575
	581	+(((
576	576	867.7 - SF7BW125 to SF12BW125
	583	+)))
577	577
	585	+(((
578	578	867.9 - SF7BW125 to SF12BW125
	587	+)))
579	579
	589	+(((
580	580	868.8 - FSK
	591	+)))
581	581
	593	+(((
	594	+
	595	+)))
582	582
	597	+(((
583	583	(% style="color:blue" %)**Downlink:**
	599	+)))
584	584
	601	+(((
585	585	Uplink channels 1-9 (RX1)
	603	+)))
586	586
	605	+(((
587	587	869.525 - SF9BW125 (RX2 downlink only)
	607	+)))
588	588
589	589
590	590
...	...	@@ -603,50 +603,93 @@
603	603	)))
604	604
605	605	* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
606		-* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
	626	+* Use the Join successful sub-band if the server doesn't include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
607	607
608	608	=== 2.8.3 CN470-510 (CN470) ===
609	609
	630	+(((
610	610	Used in China, Default use CHE=1
	632	+)))
611	611
	634	+(((
612	612	(% style="color:blue" %)**Uplink:**
	636	+)))
613	613
	638	+(((
614	614	486.3 - SF7BW125 to SF12BW125
	640	+)))
615	615
	642	+(((
616	616	486.5 - SF7BW125 to SF12BW125
	644	+)))
617	617
	646	+(((
618	618	486.7 - SF7BW125 to SF12BW125
	648	+)))
619	619
	650	+(((
620	620	486.9 - SF7BW125 to SF12BW125
	652	+)))
621	621
	654	+(((
622	622	487.1 - SF7BW125 to SF12BW125
	656	+)))
623	623
	658	+(((
624	624	487.3 - SF7BW125 to SF12BW125
	660	+)))
625	625
	662	+(((
626	626	487.5 - SF7BW125 to SF12BW125
	664	+)))
627	627
	666	+(((
628	628	487.7 - SF7BW125 to SF12BW125
	668	+)))
629	629
	670	+(((
	671	+
	672	+)))
630	630
	674	+(((
631	631	(% style="color:blue" %)**Downlink:**
	676	+)))
632	632
	678	+(((
633	633	506.7 - SF7BW125 to SF12BW125
	680	+)))
634	634
	682	+(((
635	635	506.9 - SF7BW125 to SF12BW125
	684	+)))
636	636
	686	+(((
637	637	507.1 - SF7BW125 to SF12BW125
	688	+)))
638	638
	690	+(((
639	639	507.3 - SF7BW125 to SF12BW125
	692	+)))
640	640
	694	+(((
641	641	507.5 - SF7BW125 to SF12BW125
	696	+)))
642	642
	698	+(((
643	643	507.7 - SF7BW125 to SF12BW125
	700	+)))
644	644
	702	+(((
645	645	507.9 - SF7BW125 to SF12BW125
	704	+)))
646	646
	706	+(((
647	647	508.1 - SF7BW125 to SF12BW125
	708	+)))
648	648
	710	+(((
649	649	505.3 - SF12BW125 (RX2 downlink only)
	712	+)))
650	650
651	651
652	652
...	...	@@ -669,113 +669,221 @@
669	669	)))
670	670
671	671	* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
672		-* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
	735	+* Use the Join successful sub-band if the server doesn't include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
673	673
674		-
675	675	=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
676	676
	739	+(((
677	677	(% style="color:blue" %)**Default Uplink channel:**
	741	+)))
678	678
	743	+(((
679	679	923.2 - SF7BW125 to SF10BW125
	745	+)))
680	680
	747	+(((
681	681	923.4 - SF7BW125 to SF10BW125
	749	+)))
682	682
	751	+(((
	752	+
	753	+)))
683	683
	755	+(((
684	684	(% style="color:blue" %)**Additional Uplink Channel**:
	757	+)))
685	685
	759	+(((
686	686	(OTAA mode, channel added by JoinAccept message)
	761	+)))
687	687
	763	+(((
	764	+
	765	+)))
688	688
	767	+(((
689	689	(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
	769	+)))
690	690
	771	+(((
691	691	922.2 - SF7BW125 to SF10BW125
	773	+)))
692	692
	775	+(((
693	693	922.4 - SF7BW125 to SF10BW125
	777	+)))
694	694
	779	+(((
695	695	922.6 - SF7BW125 to SF10BW125
	781	+)))
696	696
	783	+(((
697	697	922.8 - SF7BW125 to SF10BW125
	785	+)))
698	698
	787	+(((
699	699	923.0 - SF7BW125 to SF10BW125
	789	+)))
700	700
	791	+(((
701	701	922.0 - SF7BW125 to SF10BW125
	793	+)))
702	702
	795	+(((
	796	+
	797	+)))
703	703
	799	+(((
704	704	(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
	801	+)))
705	705
	803	+(((
706	706	923.6 - SF7BW125 to SF10BW125
	805	+)))
707	707
	807	+(((
708	708	923.8 - SF7BW125 to SF10BW125
	809	+)))
709	709
	811	+(((
710	710	924.0 - SF7BW125 to SF10BW125
	813	+)))
711	711
	815	+(((
712	712	924.2 - SF7BW125 to SF10BW125
	817	+)))
713	713
	819	+(((
714	714	924.4 - SF7BW125 to SF10BW125
	821	+)))
715	715
	823	+(((
716	716	924.6 - SF7BW125 to SF10BW125
	825	+)))
717	717
	827	+(((
	828	+
	829	+)))
718	718
	831	+(((
719	719	(% style="color:blue" %)**Downlink:**
	833	+)))
720	720
	835	+(((
721	721	Uplink channels 1-8 (RX1)
	837	+)))
722	722
	839	+(((
723	723	923.2 - SF10BW125 (RX2)
	841	+)))
724	724
725	725
726	726
727	727	=== 2.8.6 KR920-923 (KR920) ===
728	728
	847	+(((
729	729	(% style="color:blue" %)**Default channel:**
	849	+)))
730	730
	851	+(((
731	731	922.1 - SF7BW125 to SF12BW125
	853	+)))
732	732
	855	+(((
733	733	922.3 - SF7BW125 to SF12BW125
	857	+)))
734	734
	859	+(((
735	735	922.5 - SF7BW125 to SF12BW125
	861	+)))
736	736
	863	+(((
	864	+
	865	+)))
737	737
	867	+(((
738	738	(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
	869	+)))
739	739
	871	+(((
740	740	922.1 - SF7BW125 to SF12BW125
	873	+)))
741	741
	875	+(((
742	742	922.3 - SF7BW125 to SF12BW125
	877	+)))
743	743
	879	+(((
744	744	922.5 - SF7BW125 to SF12BW125
	881	+)))
745	745
	883	+(((
746	746	922.7 - SF7BW125 to SF12BW125
	885	+)))
747	747
	887	+(((
748	748	922.9 - SF7BW125 to SF12BW125
	889	+)))
749	749
	891	+(((
750	750	923.1 - SF7BW125 to SF12BW125
	893	+)))
751	751
	895	+(((
752	752	923.3 - SF7BW125 to SF12BW125
	897	+)))
753	753
	899	+(((
	900	+
	901	+)))
754	754
	903	+(((
755	755	(% style="color:blue" %)**Downlink:**
	905	+)))
756	756
	907	+(((
757	757	Uplink channels 1-7(RX1)
	909	+)))
758	758
	911	+(((
759	759	921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
	913	+)))
760	760
761	761
762	762
763	763	=== 2.8.7 IN865-867 (IN865) ===
764	764
	919	+(((
765	765	(% style="color:blue" %)**Uplink:**
	921	+)))
766	766
	923	+(((
767	767	865.0625 - SF7BW125 to SF12BW125
	925	+)))
768	768
	927	+(((
769	769	865.4025 - SF7BW125 to SF12BW125
	929	+)))
770	770
	931	+(((
771	771	865.9850 - SF7BW125 to SF12BW125
	933	+)))
772	772
	935	+(((
	936	+
	937	+)))
773	773
	939	+(((
774	774	(% style="color:blue" %)**Downlink:**
	941	+)))
775	775
	943	+(((
776	776	Uplink channels 1-3 (RX1)
	945	+)))
777	777
	947	+(((
778	778	866.550 - SF10BW125 (RX2)
	949	+)))
779	779
780	780
781	781
...	...	@@ -786,7 +786,6 @@
786	786	* The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
787	787	* Blink once when device transmit a packet.
788	788
789		-
790	790	== 2.10 ​Firmware Change Log ==
791	791
792	792
...	...	@@ -801,26 +801,51 @@
801	801
802	802	= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
803	803
	974	+(((
804	804	Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
	976	+)))
805	805
806		-* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
807		-* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	978	+* (((
	979	+AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
	980	+)))
	981	+* (((
	982	+LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	983	+)))
808	808
	985	+(((
809	809	There are two kinds of commands to configure LSPH01, they are:
	987	+)))
810	810
811		-* (% style="color:#4f81bd" %)** General Commands**.
	989	+* (((
	990	+(% style="color:#4f81bd" %)** General Commands**.
	991	+)))
812	812
	993	+(((
813	813	These commands are to configure:
	995	+)))
814	814
815		-* General system settings like: uplink interval.
816		-* LoRaWAN protocol & radio related command.
	997	+* (((
	998	+General system settings like: uplink interval.
	999	+)))
	1000	+* (((
	1001	+LoRaWAN protocol & radio related command.
	1002	+)))
817	817
818		-They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	1004	+(((
	1005	+They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki: [[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	1006	+)))
819	819
	1008	+(((
	1009	+
	1010	+)))
820	820
821		-* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1012	+* (((
	1013	+(% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1014	+)))
822	822
	1016	+(((
823	823	These commands only valid for LSPH01, as below:
	1018	+)))
824	824
825	825
826	826
...	...	@@ -833,17 +833,27 @@
833	833	[[image:image-20220607171554-8.png]]
834	834
835	835
836		-
	1031	+(((
837	837	(% style="color:#037691" %)**Downlink Command: 0x01**
	1033	+)))
838	838
	1035	+(((
839	839	Format: Command Code (0x01) followed by 3 bytes time value.
	1037	+)))
840	840
	1039	+(((
841	841	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	1041	+)))
842	842
843		-* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
844		-* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	1043	+* (((
	1044	+Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	1045	+)))
	1046	+* (((
	1047	+Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
845	845
846	846
	1050	+
	1051	+)))
847	847
848	848	== 3.2 Set Interrupt Mode ==
849	849
...	...	@@ -851,21 +851,36 @@
851	851
852	852	(% style="color:#037691" %)**AT Command: AT+INTMOD**
853	853
854		-[[image:image-20220607171716-9.png]]
	1059	+[[image:image-20220610105907-1.png]]
855	855
856	856
	1062	+(((
857	857	(% style="color:#037691" %)**Downlink Command: 0x06**
	1064	+)))
858	858
	1066	+(((
859	859	Format: Command Code (0x06) followed by 3 bytes.
	1068	+)))
860	860
	1070	+(((
861	861	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
	1072	+)))
862	862
863		-* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
864		-* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1074	+* (((
	1075	+Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
	1076	+)))
	1077	+* (((
	1078	+Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1079	+)))
865	865
	1081	+(((
	1082	+
	1083	+)))
	1084	+
	1085	+
866	866	== 3.3 Calibrate Sensor ==
867	867
868		-Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
	1088	+Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
869	869
870	870
871	871
...	...	@@ -897,14 +897,14 @@
897	897
898	898	Version
899	899	)))|Sensor Type|Reserve|(((
900		-[[Message Type>>path:#H2.3.6MessageType]]
	1120	+[[Message Type>>||anchor="H2.3.6MessageType"]]
901	901	Always 0x02
902	902	)))
903	903
904		-**Software Type**: Always 0x03 for LSPH01
	1124	+(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LSPH01
905	905
906	906
907		-**Frequency Band**:
	1127	+(% style="color:#037691" %)**Frequency Band**:
908	908
909	909	*0x01: EU868
910	910
...	...	@@ -927,13 +927,13 @@
927	927	*0xa0: AS923-3
928	928
929	929
930		-**Sub-Band**: value 0x00 ~~ 0x08
	1150	+(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
931	931
932	932
933		-**Firmware Version**: 0x0100, Means: v1.0.0 version
	1153	+(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
934	934
935	935
936		-**Sensor Type**:
	1156	+(% style="color:#037691" %)**Sensor Type**:
937	937
938	938	0x01: LSE01
939	939
...	...	@@ -960,7 +960,7 @@
960	960	)))
961	961
962	962	(((
963		-The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
	1183	+The discharge curve is not linear so can't simply use percentage to show the battery level. Below is the battery performance.
964	964	)))
965	965
966	966	[[image:1654593587246-335.png]]
...	...	@@ -995,12 +995,12 @@
995	995	)))
996	996
997	997
998		-**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
	1218	+(% style="color:#037691" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
999	999
1000	1000	[[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
1001	1001
1002	1002
1003		-**Step 2**: Open it and choose
	1223	+(% style="color:#037691" %)**Step 2**(%%): Open it and choose
1004	1004
1005	1005	* Product Model
1006	1006	* Uplink Interval
...	...	@@ -1014,13 +1014,13 @@
1014	1014	The battery related documents as below:
1015	1015
1016	1016	* (((
1017		-[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
	1237	+[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
1018	1018	)))
1019	1019	* (((
1020	1020	[[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
1021	1021	)))
1022	1022	* (((
1023		-[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
	1243	+[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
1024	1024	)))
1025	1025
1026	1026	[[image:image-20220607172042-11.png]]
...	...	@@ -1037,9 +1037,13 @@
1037	1037
1038	1038	=== ​4.3.2 Replace the battery ===
1039	1039
1040		-You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
	1260	+(((
	1261	+You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
	1262	+)))
1041	1041
1042		-The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
	1264	+(((
	1265	+The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
	1266	+)))
1043	1043
1044	1044
1045	1045
...	...	@@ -1060,29 +1060,29 @@
1060	1060	(% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1061	1061
1062	1062
	1287	+(((
1063	1063	In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
	1289	+)))
1064	1064
1065	1065
1066	1066	[[image:1654593712276-618.png]]
1067	1067
1068		-Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
	1294	+Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1069	1069
1070	1070
1071		-
1072	1072	= 6. FAQ =
1073	1073
1074	1074	== 6.1 How to change the LoRa Frequency Bands/Region ==
1075	1075
1076		-You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
	1301	+You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1077	1077	When downloading the images, choose the required image file for download. ​
1078	1078
1079	1079
1080		-
1081	1081	= 7. Trouble Shooting =
1082	1082
1083		-== 7.1 AT Commands input doesn’t work ==
	1307	+== 7.1 AT Commands input doesn't work ==
1084	1084
1085		-In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
	1309	+In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1086	1086
1087	1087
1088	1088
...	...	@@ -1102,6 +1102,7 @@
1102	1102	* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1103	1103	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1104	1104
	1329	+
1105	1105	= 9. ​Packing Info =
1106	1106
1107	1107
...	...	@@ -1116,6 +1116,7 @@
1116	1116	* Package Size / pcs : cm
1117	1117	* Weight / pcs : g
1118	1118
	1344	+
1119	1119	= 10. ​Support =
1120	1120
1121	1121	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

image-20220610105907-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+15.5 KB

Content