Skip to Content
Last modified by Xiaoling on 2025/04/25 14:08
From version 74.5
edited by Xiaoling
on 2022/06/07 17:48
Change comment: There is no comment for this version
To version 93.1
edited by Xiaoling
on 2022/06/25 17:05
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -4,74 +4,31 @@
4 4  
5 5  
6 6  
7 -**Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 65  
66 66  
12 +**Table of Contents:**
67 67  
14 +{{toc/}}
68 68  
69 69  
17 +
18 +
19 +
20 +
21 +
22 +
23 +
24 +
70 70  = 1. Introduction =
71 71  
72 72  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
73 73  
74 74  (((
30 +
31 +
75 75  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
76 76  )))
77 77  
... ... @@ -96,6 +96,7 @@
96 96  
97 97  
98 98  
56 +
99 99  == ​1.2 Features ==
100 100  
101 101  * LoRaWAN 1.0.3 Class A
... ... @@ -113,6 +113,7 @@
113 113  * 8500mAh Battery for long term use
114 114  
115 115  
74 +
116 116  == 1.3 Probe Specification ==
117 117  
118 118  
... ... @@ -134,11 +134,13 @@
134 134  * Length: 3.5 meters
135 135  
136 136  
96 +
137 137  == 1.4 ​Applications ==
138 138  
139 139  * Smart Agriculture
140 140  
141 141  
102 +
142 142  == 1.5 Pin mapping and power on ==
143 143  
144 144  [[image:1654592472094-134.png]]
... ... @@ -154,7 +154,7 @@
154 154  )))
155 155  
156 156  (((
157 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
118 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
158 158  )))
159 159  
160 160  
... ... @@ -166,10 +166,14 @@
166 166  
167 167  (((
168 168  [[image:1654592492399-921.png]]
130 +
131 +
169 169  )))
170 170  
171 171  (((
172 172  The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
136 +
137 +
173 173  )))
174 174  
175 175  (((
... ... @@ -193,11 +193,13 @@
193 193  [[image:1654592600093-601.png]]
194 194  
195 195  
161 +
196 196  **Add APP EUI and DEV EUI**
197 197  
198 198  [[image:1654592619856-881.png]]
199 199  
200 200  
167 +
201 201  **Add APP EUI in the application**
202 202  
203 203  [[image:1654592632656-512.png]]
... ... @@ -240,19 +240,17 @@
240 240  )))
241 241  
242 242  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
243 -|(((
244 -**Size**
210 +|=(% style="width: 62.5px;" %)(((
211 +**Size (bytes)**
212 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
213 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
214 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
245 245  
246 -**(bytes)**
247 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
248 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
249 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
250 -
251 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
252 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
253 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
216 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
217 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
218 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
254 254  )))|Reserve|(((
255 -[[Message Type>>path:#H2.3.6MessageType]]
220 +[[Message Type>>||anchor="H2.3.6MessageType"]]
256 256  )))
257 257  
258 258  [[image:1654592721645-318.png]]
... ... @@ -308,7 +308,7 @@
308 308  
309 309  === 2.3.5 Interrupt Pin ===
310 310  
311 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
276 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
312 312  
313 313  
314 314  **Example:**
... ... @@ -330,11 +330,11 @@
330 330  )))
331 331  
332 332  
333 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
334 -|=**Message Type Code**|=**Description**|=**Payload**
335 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
336 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
337 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
298 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
299 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
300 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
301 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
302 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
338 338  
339 339  
340 340  
... ... @@ -357,7 +357,7 @@
357 357  
358 358  == 2.4 Uplink Interval ==
359 359  
360 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
325 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
361 361  
362 362  
363 363  
... ... @@ -520,12 +520,10 @@
520 520  
521 521  (% style="color:#037691" %)**Calibration Payload**
522 522  
523 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
524 -|(((
525 -**Size**
526 -
527 -**(bytes)**
528 -)))|**1**|**1**|**1**|**7**|**1**
488 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
489 +|=(% style="width: 62.5px;" %)(((
490 +**Size (bytes)**
491 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
529 529  |**Value**|(((
530 530  PH4
531 531  
... ... @@ -535,7 +535,7 @@
535 535  
536 536  Calibrate value
537 537  )))|Reserve|(((
538 -[[Message Type>>path:#H2.3.6MessageType]]
501 +[[Message Type>>||anchor="H2.3.6MessageType"]]
539 539  
540 540  Always 0x03
541 541  )))
... ... @@ -550,6 +550,8 @@
550 550  
551 551  
552 552  
516 +
517 +
553 553  == 2.8 Frequency Plans ==
554 554  
555 555  (((
... ... @@ -559,32 +559,61 @@
559 559  
560 560  === 2.8.1 EU863-870 (EU868) ===
561 561  
527 +(((
562 562  (% style="color:blue" %)**Uplink:**
529 +)))
563 563  
531 +(((
564 564  868.1 - SF7BW125 to SF12BW125
533 +)))
565 565  
535 +(((
566 566  868.3 - SF7BW125 to SF12BW125 and SF7BW250
537 +)))
567 567  
539 +(((
568 568  868.5 - SF7BW125 to SF12BW125
541 +)))
569 569  
543 +(((
570 570  867.1 - SF7BW125 to SF12BW125
545 +)))
571 571  
547 +(((
572 572  867.3 - SF7BW125 to SF12BW125
549 +)))
573 573  
551 +(((
574 574  867.5 - SF7BW125 to SF12BW125
553 +)))
575 575  
555 +(((
576 576  867.7 - SF7BW125 to SF12BW125
557 +)))
577 577  
559 +(((
578 578  867.9 - SF7BW125 to SF12BW125
561 +)))
579 579  
563 +(((
580 580  868.8 - FSK
565 +)))
581 581  
567 +(((
568 +
569 +)))
582 582  
571 +(((
583 583  (% style="color:blue" %)**Downlink:**
573 +)))
584 584  
575 +(((
585 585  Uplink channels 1-9 (RX1)
577 +)))
586 586  
579 +(((
587 587  869.525 - SF9BW125 (RX2 downlink only)
581 +)))
588 588  
589 589  
590 590  
... ... @@ -605,48 +605,93 @@
605 605  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
606 606  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
607 607  
602 +
603 +
608 608  === 2.8.3 CN470-510 (CN470) ===
609 609  
606 +(((
610 610  Used in China, Default use CHE=1
608 +)))
611 611  
610 +(((
612 612  (% style="color:blue" %)**Uplink:**
612 +)))
613 613  
614 +(((
614 614  486.3 - SF7BW125 to SF12BW125
616 +)))
615 615  
618 +(((
616 616  486.5 - SF7BW125 to SF12BW125
620 +)))
617 617  
622 +(((
618 618  486.7 - SF7BW125 to SF12BW125
624 +)))
619 619  
626 +(((
620 620  486.9 - SF7BW125 to SF12BW125
628 +)))
621 621  
630 +(((
622 622  487.1 - SF7BW125 to SF12BW125
632 +)))
623 623  
634 +(((
624 624  487.3 - SF7BW125 to SF12BW125
636 +)))
625 625  
638 +(((
626 626  487.5 - SF7BW125 to SF12BW125
640 +)))
627 627  
642 +(((
628 628  487.7 - SF7BW125 to SF12BW125
644 +)))
629 629  
646 +(((
647 +
648 +)))
630 630  
650 +(((
631 631  (% style="color:blue" %)**Downlink:**
652 +)))
632 632  
654 +(((
633 633  506.7 - SF7BW125 to SF12BW125
656 +)))
634 634  
658 +(((
635 635  506.9 - SF7BW125 to SF12BW125
660 +)))
636 636  
662 +(((
637 637  507.1 - SF7BW125 to SF12BW125
664 +)))
638 638  
666 +(((
639 639  507.3 - SF7BW125 to SF12BW125
668 +)))
640 640  
670 +(((
641 641  507.5 - SF7BW125 to SF12BW125
672 +)))
642 642  
674 +(((
643 643  507.7 - SF7BW125 to SF12BW125
676 +)))
644 644  
678 +(((
645 645  507.9 - SF7BW125 to SF12BW125
680 +)))
646 646  
682 +(((
647 647  508.1 - SF7BW125 to SF12BW125
684 +)))
648 648  
686 +(((
649 649  505.3 - SF12BW125 (RX2 downlink only)
688 +)))
650 650  
651 651  
652 652  
... ... @@ -672,110 +672,220 @@
672 672  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
673 673  
674 674  
714 +
675 675  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
676 676  
717 +(((
677 677  (% style="color:blue" %)**Default Uplink channel:**
719 +)))
678 678  
721 +(((
679 679  923.2 - SF7BW125 to SF10BW125
723 +)))
680 680  
725 +(((
681 681  923.4 - SF7BW125 to SF10BW125
727 +)))
682 682  
729 +(((
730 +
731 +)))
683 683  
733 +(((
684 684  (% style="color:blue" %)**Additional Uplink Channel**:
735 +)))
685 685  
737 +(((
686 686  (OTAA mode, channel added by JoinAccept message)
739 +)))
687 687  
741 +(((
742 +
743 +)))
688 688  
745 +(((
689 689  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
747 +)))
690 690  
749 +(((
691 691  922.2 - SF7BW125 to SF10BW125
751 +)))
692 692  
753 +(((
693 693  922.4 - SF7BW125 to SF10BW125
755 +)))
694 694  
757 +(((
695 695  922.6 - SF7BW125 to SF10BW125
759 +)))
696 696  
761 +(((
697 697  922.8 - SF7BW125 to SF10BW125
763 +)))
698 698  
765 +(((
699 699  923.0 - SF7BW125 to SF10BW125
767 +)))
700 700  
769 +(((
701 701  922.0 - SF7BW125 to SF10BW125
771 +)))
702 702  
773 +(((
774 +
775 +)))
703 703  
777 +(((
704 704  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
779 +)))
705 705  
781 +(((
706 706  923.6 - SF7BW125 to SF10BW125
783 +)))
707 707  
785 +(((
708 708  923.8 - SF7BW125 to SF10BW125
787 +)))
709 709  
789 +(((
710 710  924.0 - SF7BW125 to SF10BW125
791 +)))
711 711  
793 +(((
712 712  924.2 - SF7BW125 to SF10BW125
795 +)))
713 713  
797 +(((
714 714  924.4 - SF7BW125 to SF10BW125
799 +)))
715 715  
801 +(((
716 716  924.6 - SF7BW125 to SF10BW125
803 +)))
717 717  
805 +(((
806 +
807 +)))
718 718  
809 +(((
719 719  (% style="color:blue" %)**Downlink:**
811 +)))
720 720  
813 +(((
721 721  Uplink channels 1-8 (RX1)
815 +)))
722 722  
817 +(((
723 723  923.2 - SF10BW125 (RX2)
819 +)))
724 724  
725 725  
726 726  
727 727  === 2.8.6 KR920-923 (KR920) ===
728 728  
825 +(((
729 729  (% style="color:blue" %)**Default channel:**
827 +)))
730 730  
829 +(((
731 731  922.1 - SF7BW125 to SF12BW125
831 +)))
732 732  
833 +(((
733 733  922.3 - SF7BW125 to SF12BW125
835 +)))
734 734  
837 +(((
735 735  922.5 - SF7BW125 to SF12BW125
839 +)))
736 736  
841 +(((
842 +
843 +)))
737 737  
845 +(((
738 738  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
847 +)))
739 739  
849 +(((
740 740  922.1 - SF7BW125 to SF12BW125
851 +)))
741 741  
853 +(((
742 742  922.3 - SF7BW125 to SF12BW125
855 +)))
743 743  
857 +(((
744 744  922.5 - SF7BW125 to SF12BW125
859 +)))
745 745  
861 +(((
746 746  922.7 - SF7BW125 to SF12BW125
863 +)))
747 747  
865 +(((
748 748  922.9 - SF7BW125 to SF12BW125
867 +)))
749 749  
869 +(((
750 750  923.1 - SF7BW125 to SF12BW125
871 +)))
751 751  
873 +(((
752 752  923.3 - SF7BW125 to SF12BW125
875 +)))
753 753  
877 +(((
878 +
879 +)))
754 754  
881 +(((
755 755  (% style="color:blue" %)**Downlink:**
883 +)))
756 756  
885 +(((
757 757  Uplink channels 1-7(RX1)
887 +)))
758 758  
889 +(((
759 759  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
891 +)))
760 760  
761 761  
762 762  
763 763  === 2.8.7 IN865-867 (IN865) ===
764 764  
897 +(((
765 765  (% style="color:blue" %)**Uplink:**
899 +)))
766 766  
901 +(((
767 767  865.0625 - SF7BW125 to SF12BW125
903 +)))
768 768  
905 +(((
769 769  865.4025 - SF7BW125 to SF12BW125
907 +)))
770 770  
909 +(((
771 771  865.9850 - SF7BW125 to SF12BW125
911 +)))
772 772  
913 +(((
914 +
915 +)))
773 773  
917 +(((
774 774  (% style="color:blue" %)**Downlink:**
919 +)))
775 775  
921 +(((
776 776  Uplink channels 1-3 (RX1)
923 +)))
777 777  
925 +(((
778 778  866.550 - SF10BW125 (RX2)
927 +)))
779 779  
780 780  
781 781  
... ... @@ -787,6 +787,7 @@
787 787  * Blink once when device transmit a packet.
788 788  
789 789  
939 +
790 790  == 2.10 ​Firmware Change Log ==
791 791  
792 792  
... ... @@ -801,26 +801,51 @@
801 801  
802 802  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
803 803  
954 +(((
804 804  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
956 +)))
805 805  
806 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
807 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
958 +* (((
959 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
960 +)))
961 +* (((
962 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
963 +)))
808 808  
965 +(((
809 809  There are two kinds of commands to configure LSPH01, they are:
967 +)))
810 810  
811 -* (% style="color:#4f81bd" %)** General Commands**.
969 +* (((
970 +(% style="color:#4f81bd" %)** General Commands**.
971 +)))
812 812  
973 +(((
813 813  These commands are to configure:
975 +)))
814 814  
815 -* General system settings like: uplink interval.
816 -* LoRaWAN protocol & radio related command.
977 +* (((
978 +General system settings like: uplink interval.
979 +)))
980 +* (((
981 +LoRaWAN protocol & radio related command.
982 +)))
817 817  
984 +(((
818 818  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
986 +)))
819 819  
988 +(((
989 +
990 +)))
820 820  
821 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
992 +* (((
993 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
994 +)))
822 822  
996 +(((
823 823  These commands only valid for LSPH01, as below:
998 +)))
824 824  
825 825  
826 826  
... ... @@ -833,17 +833,27 @@
833 833  [[image:image-20220607171554-8.png]]
834 834  
835 835  
836 -
1011 +(((
837 837  (% style="color:#037691" %)**Downlink Command: 0x01**
1013 +)))
838 838  
1015 +(((
839 839  Format: Command Code (0x01) followed by 3 bytes time value.
1017 +)))
840 840  
1019 +(((
841 841  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1021 +)))
842 842  
843 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
844 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1023 +* (((
1024 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1025 +)))
1026 +* (((
1027 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
845 845  
846 846  
1030 +
1031 +)))
847 847  
848 848  == 3.2 Set Interrupt Mode ==
849 849  
... ... @@ -851,21 +851,37 @@
851 851  
852 852  (% style="color:#037691" %)**AT Command: AT+INTMOD**
853 853  
854 -[[image:image-20220607171716-9.png]]
1039 +[[image:image-20220610105907-1.png]]
855 855  
856 856  
1042 +(((
857 857  (% style="color:#037691" %)**Downlink Command: 0x06**
1044 +)))
858 858  
1046 +(((
859 859  Format: Command Code (0x06) followed by 3 bytes.
1048 +)))
860 860  
1050 +(((
861 861  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1052 +)))
862 862  
863 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
864 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1054 +* (((
1055 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1056 +)))
1057 +* (((
1058 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1059 +)))
865 865  
1061 +(((
1062 +
1063 +)))
1064 +
1065 +
1066 +
866 866  == 3.3 Calibrate Sensor ==
867 867  
868 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1069 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
869 869  
870 870  
871 871  
... ... @@ -897,14 +897,14 @@
897 897  
898 898  Version
899 899  )))|Sensor Type|Reserve|(((
900 -[[Message Type>>path:#H2.3.6MessageType]]
1101 +[[Message Type>>||anchor="H2.3.6MessageType"]]
901 901  Always 0x02
902 902  )))
903 903  
904 -**Software Type**: Always 0x03 for LSPH01
1105 +(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LSPH01
905 905  
906 906  
907 -**Frequency Band**:
1108 +(% style="color:#037691" %)**Frequency Band**:
908 908  
909 909  *0x01: EU868
910 910  
... ... @@ -927,13 +927,13 @@
927 927  *0xa0: AS923-3
928 928  
929 929  
930 -**Sub-Band**: value 0x00 ~~ 0x08
1131 +(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
931 931  
932 932  
933 -**Firmware Version**: 0x0100, Means: v1.0.0 version
1134 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
934 934  
935 935  
936 -**Sensor Type**:
1137 +(% style="color:#037691" %)**Sensor Type**:
937 937  
938 938  0x01: LSE01
939 939  
... ... @@ -960,7 +960,7 @@
960 960  )))
961 961  
962 962  (((
963 -The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1164 +The discharge curve is not linear so can't simply use percentage to show the battery level. Below is the battery performance.
964 964  )))
965 965  
966 966  [[image:1654593587246-335.png]]
... ... @@ -995,12 +995,12 @@
995 995  )))
996 996  
997 997  
998 -**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
1199 +(% style="color:#037691" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
999 999  
1000 1000  [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
1001 1001  
1002 1002  
1003 -**Step 2**: Open it and choose
1204 +(% style="color:#037691" %)**Step 2**(%%): Open it and choose
1004 1004  
1005 1005  * Product Model
1006 1006  * Uplink Interval
... ... @@ -1014,13 +1014,13 @@
1014 1014  The battery related documents as below:
1015 1015  
1016 1016  * (((
1017 -[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
1218 +[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
1018 1018  )))
1019 1019  * (((
1020 1020  [[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
1021 1021  )))
1022 1022  * (((
1023 -[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
1224 +[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
1024 1024  )))
1025 1025  
1026 1026  [[image:image-20220607172042-11.png]]
... ... @@ -1037,9 +1037,13 @@
1037 1037  
1038 1038  === ​4.3.2 Replace the battery ===
1039 1039  
1040 -You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1241 +(((
1242 +You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
1243 +)))
1041 1041  
1245 +(((
1042 1042  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1247 +)))
1043 1043  
1044 1044  
1045 1045  
... ... @@ -1060,29 +1060,29 @@
1060 1060  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1061 1061  
1062 1062  
1268 +(((
1063 1063  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1270 +)))
1064 1064  
1065 1065  
1066 1066   [[image:1654593712276-618.png]]
1067 1067  
1068 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1275 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1069 1069  
1070 1070  
1071 -
1072 1072  = 6. FAQ =
1073 1073  
1074 1074  == 6.1 How to change the LoRa Frequency Bands/Region ==
1075 1075  
1076 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1282 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1077 1077  When downloading the images, choose the required image file for download. ​
1078 1078  
1079 1079  
1080 -
1081 1081  = 7. Trouble Shooting =
1082 1082  
1083 -== 7.1 AT Commands input doesn’t work ==
1288 +== 7.1 AT Commands input doesn't work ==
1084 1084  
1085 -In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1290 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1086 1086  
1087 1087  
1088 1088  
image-20220610105907-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +15.5 KB
Content