Changes for page LSPH01 -- LoRaWAN Soil pH Sensor User Manual

Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 1 added, 0 removed)
  • image-20220610105907-1.png

Details

Page properties

Content

...	...	@@ -4,62 +4,7 @@
4	4
5	5
6	6
7		-**Contents:**
8	8
9		-* [[1. Introduction>>path:#H1.Introduction]]
10		-** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11		-** [[​1.2 Features>>path:#H200B1.2Features]]
12		-** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13		-** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14		-** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15		-* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16		-** [[2.1 How it works>>path:#H2.1Howitworks]]
17		-** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18		-** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19		-*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20		-*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21		-*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22		-*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23		-*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24		-*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25		-*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26		-** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27		-** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28		-** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29		-*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30		-*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31		-*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32		-** [[2.7 Calibration>>path:#H2.7Calibration]]
33		-** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34		-*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35		-*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36		-*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37		-*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38		-*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39		-*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40		-*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41		-** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42		-** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43		-* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44		-** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45		-** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46		-** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47		-** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48		-* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49		-** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50		-** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51		-** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52		-*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53		-*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54		-* [[5. Use AT Command>>path:#H5.UseATCommand]]
55		-** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56		-* [[6. FAQ>>path:#H6.FAQ]]
57		-** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58		-* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59		-** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60		-* [[8. Order Info>>path:#H8.OrderInfo]]
61		-* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62		-* [[10. ​Support>>path:#H10.A0200BSupport]]
63	63
64	64
65	65
...	...	@@ -67,11 +67,28 @@
67	67
68	68
69	69
	15	+
	16	+**Table of Contents:**
	17	+
	18	+{{toc/}}
	19	+
	20	+
	21	+
	22	+
	23	+
	24	+
	25	+
	26	+
	27	+
	28	+
70	70	= 1. Introduction =
71	71
	31	+
72	72	== 1.1 ​What is LoRaWAN Soil pH Sensor ==
73	73
74	74	(((
	35	+
	36	+
75	75	The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
76	76	)))
77	77
...	...	@@ -96,8 +96,10 @@
96	96
97	97
98	98
	61	+
99	99	== ​1.2 Features ==
100	100
	64	+
101	101	* LoRaWAN 1.0.3 Class A
102	102	* Ultra-low power consumption
103	103	* Monitor soil pH with temperature compensation.
...	...	@@ -113,6 +113,9 @@
113	113	* 8500mAh Battery for long term use
114	114
115	115
	80	+
	81	+
	82	+
116	116	== 1.3 Probe Specification ==
117	117
118	118
...	...	@@ -134,13 +134,20 @@
134	134	* Length: 3.5 meters
135	135
136	136
	104	+
	105	+
	106	+
137	137	== 1.4 ​Applications ==
138	138
	109	+
139	139	* Smart Agriculture
140	140
141	141
	113	+
	114	+
142	142	== 1.5 Pin mapping and power on ==
143	143
	117	+
144	144	[[image:1654592472094-134.png]]
145	145
146	146
...	...	@@ -147,19 +147,23 @@
147	147
148	148	= 2. Configure LSPH01 to connect to LoRaWAN network =
149	149
	124	+
150	150	== 2.1 How it works ==
151	151
	127	+
152	152	(((
153	153	The LSPH01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSPH01. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
154	154	)))
155	155
156	156	(((
157		-In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
	133	+In case you can't set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
158	158	)))
159	159
160	160
	137	+
161	161	== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
162	162
	140	+
163	163	(((
164	164	Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.
165	165	)))
...	...	@@ -166,10 +166,14 @@
166	166
167	167	(((
168	168	[[image:1654592492399-921.png]]
	147	+
	148	+
169	169	)))
170	170
171	171	(((
172	172	The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
	153	+
	154	+
173	173	)))
174	174
175	175	(((
...	...	@@ -193,11 +193,13 @@
193	193	[[image:1654592600093-601.png]]
194	194
195	195
	178	+
196	196	**Add APP EUI and DEV EUI**
197	197
198	198	[[image:1654592619856-881.png]]
199	199
200	200
	184	+
201	201	**Add APP EUI in the application**
202	202
203	203	[[image:1654592632656-512.png]]
...	...	@@ -219,6 +219,8 @@
219	219
220	220	(((
221	221	(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	206	+
	207	+
222	222	)))
223	223
224	224	[[image:1654592697690-910.png]]
...	...	@@ -227,6 +227,7 @@
227	227
228	228	== 2.3 ​Uplink Payload ==
229	229
	216	+
230	230	(((
231	231	LSPH01 will uplink payload via LoRaWAN with below payload format:
232	232	)))
...	...	@@ -240,19 +240,17 @@
240	240	)))
241	241
242	242	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
243		-|(((
244		-**Size**
	230	+|=(% style="width: 62.5px;" %)(((
	231	+**Size (bytes)**
	232	+)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
	233	+|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
	234	+[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
245	245
246		-**(bytes)**
247		-)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
248		-|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
249		-[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
250		-
251		-[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
252		-)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
253		-[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
	236	+[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
	237	+)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
	238	+[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
254	254	)))|Reserve|(((
255		-[[Message Type>>path:#H2.3.6MessageType]]
	240	+[[Message Type>>||anchor="H2.3.6MessageType"]]
256	256	)))
257	257
258	258	[[image:1654592721645-318.png]]
...	...	@@ -272,6 +272,7 @@
272	272
273	273	=== 2.3.2 DS18B20 Temperature sensor ===
274	274
	260	+
275	275	This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
276	276
277	277
...	...	@@ -285,6 +285,7 @@
285	285
286	286	=== 2.3.3 Soil pH ===
287	287
	274	+
288	288	Range: 0 ~~ 14 pH
289	289
290	290	**Example:**
...	...	@@ -295,6 +295,7 @@
295	295
296	296	=== 2.3.4 Soil Temperature ===
297	297
	285	+
298	298	Get Soil Temperature
299	299
300	300
...	...	@@ -308,9 +308,10 @@
308	308
309	309	=== 2.3.5 Interrupt Pin ===
310	310
311		-This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
312	312
	300	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
313	313
	302	+
314	314	**Example:**
315	315
316	316	0x00: Normal uplink packet.
...	...	@@ -321,6 +321,7 @@
321	321
322	322	=== 2.3.6 Message Type ===
323	323
	313	+
324	324	(((
325	325	For a normal uplink payload, the message type is always 0x01.
326	326	)))
...	...	@@ -330,14 +330,16 @@
330	330	)))
331	331
332	332
333		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
334		-|=**Message Type Code**|=**Description**|=**Payload**
335		-|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
336		-|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
337		-|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
	323	+(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
	324	+|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
	325	+|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
	326	+|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
	327	+|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
338	338
339	339
340	340
	331	+
	332	+
341	341	=== 2.3.7 Decode payload in The Things Network ===
342	342
343	343	While using TTN network, you can add the payload format to decode the payload.
...	...	@@ -350,7 +350,7 @@
350	350	)))
351	351
352	352	(((
353		-LSPH01 TTN Payload Decoder: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
	345	+LSPH01 TTN Payload Decoder:  [[https:~~/~~/www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0>>https://www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0]]
354	354	)))
355	355
356	356
...	...	@@ -357,12 +357,14 @@
357	357
358	358	== 2.4 Uplink Interval ==
359	359
360		-The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
361	361
	353	+The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
362	362
363	363
	356	+
364	364	== 2.5 ​Show Data in DataCake IoT Server ==
365	365
	359	+
366	366	(((
367	367	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
368	368	)))
...	...	@@ -405,7 +405,7 @@
405	405	)))
406	406
407	407	(((
408		-Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
	402	+Download Datacake decoder from: [[https:~~/~~/www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0>>url:https://www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0]]
409	409	)))
410	410
411	411
...	...	@@ -507,9 +507,13 @@
507	507
508	508	== 2.7 Calibration ==
509	509
	504	+(((
510	510	User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
	506	+)))
511	511
	508	+(((
512	512	After stable, user can use below command to calibrate.
	510	+)))
513	513
514	514	[[image:image-20220607171149-4.png]]
515	515
...	...	@@ -516,12 +516,10 @@
516	516
517	517	(% style="color:#037691" %)**Calibration Payload**
518	518
519		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
520		-|(((
521		-**Size**
522		-
523		-**(bytes)**
524		-)))|**1**|**1**|**1**|**7**|**1**
	517	+(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
	518	+|=(% style="width: 62.5px;" %)(((
	519	+**Size (bytes)**
	520	+)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
525	525	|**Value**|(((
526	526	PH4
527	527
...	...	@@ -531,7 +531,7 @@
531	531
532	532	Calibrate value
533	533	)))|Reserve|(((
534		-[[Message Type>>path:#H2.3.6MessageType]]
	530	+[[Message Type>>||anchor="H2.3.6MessageType"]]
535	535
536	536	Always 0x03
537	537	)))
...	...	@@ -545,7 +545,6 @@
545	545	* Reply to non-confirmed packet: 14 00
546	546
547	547
548		-
549	549	== 2.8 Frequency Plans ==
550	550
551	551	(((
...	...	@@ -555,32 +555,61 @@
555	555
556	556	=== 2.8.1 EU863-870 (EU868) ===
557	557
	553	+(((
558	558	(% style="color:blue" %)**Uplink:**
	555	+)))
559	559
	557	+(((
560	560	868.1 - SF7BW125 to SF12BW125
	559	+)))
561	561
	561	+(((
562	562	868.3 - SF7BW125 to SF12BW125 and SF7BW250
	563	+)))
563	563
	565	+(((
564	564	868.5 - SF7BW125 to SF12BW125
	567	+)))
565	565
	569	+(((
566	566	867.1 - SF7BW125 to SF12BW125
	571	+)))
567	567
	573	+(((
568	568	867.3 - SF7BW125 to SF12BW125
	575	+)))
569	569
	577	+(((
570	570	867.5 - SF7BW125 to SF12BW125
	579	+)))
571	571
	581	+(((
572	572	867.7 - SF7BW125 to SF12BW125
	583	+)))
573	573
	585	+(((
574	574	867.9 - SF7BW125 to SF12BW125
	587	+)))
575	575
	589	+(((
576	576	868.8 - FSK
	591	+)))
577	577
	593	+(((
	594	+
	595	+)))
578	578
	597	+(((
579	579	(% style="color:blue" %)**Downlink:**
	599	+)))
580	580
	601	+(((
581	581	Uplink channels 1-9 (RX1)
	603	+)))
582	582
	605	+(((
583	583	869.525 - SF9BW125 (RX2 downlink only)
	607	+)))
584	584
585	585
586	586
...	...	@@ -599,50 +599,93 @@
599	599	)))
600	600
601	601	* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
602		-* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
	626	+* Use the Join successful sub-band if the server doesn't include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
603	603
604	604	=== 2.8.3 CN470-510 (CN470) ===
605	605
	630	+(((
606	606	Used in China, Default use CHE=1
	632	+)))
607	607
	634	+(((
608	608	(% style="color:blue" %)**Uplink:**
	636	+)))
609	609
	638	+(((
610	610	486.3 - SF7BW125 to SF12BW125
	640	+)))
611	611
	642	+(((
612	612	486.5 - SF7BW125 to SF12BW125
	644	+)))
613	613
	646	+(((
614	614	486.7 - SF7BW125 to SF12BW125
	648	+)))
615	615
	650	+(((
616	616	486.9 - SF7BW125 to SF12BW125
	652	+)))
617	617
	654	+(((
618	618	487.1 - SF7BW125 to SF12BW125
	656	+)))
619	619
	658	+(((
620	620	487.3 - SF7BW125 to SF12BW125
	660	+)))
621	621
	662	+(((
622	622	487.5 - SF7BW125 to SF12BW125
	664	+)))
623	623
	666	+(((
624	624	487.7 - SF7BW125 to SF12BW125
	668	+)))
625	625
	670	+(((
	671	+
	672	+)))
626	626
	674	+(((
627	627	(% style="color:blue" %)**Downlink:**
	676	+)))
628	628
	678	+(((
629	629	506.7 - SF7BW125 to SF12BW125
	680	+)))
630	630
	682	+(((
631	631	506.9 - SF7BW125 to SF12BW125
	684	+)))
632	632
	686	+(((
633	633	507.1 - SF7BW125 to SF12BW125
	688	+)))
634	634
	690	+(((
635	635	507.3 - SF7BW125 to SF12BW125
	692	+)))
636	636
	694	+(((
637	637	507.5 - SF7BW125 to SF12BW125
	696	+)))
638	638
	698	+(((
639	639	507.7 - SF7BW125 to SF12BW125
	700	+)))
640	640
	702	+(((
641	641	507.9 - SF7BW125 to SF12BW125
	704	+)))
642	642
	706	+(((
643	643	508.1 - SF7BW125 to SF12BW125
	708	+)))
644	644
	710	+(((
645	645	505.3 - SF12BW125 (RX2 downlink only)
	712	+)))
646	646
647	647
648	648
...	...	@@ -665,113 +665,221 @@
665	665	)))
666	666
667	667	* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
668		-* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
	735	+* Use the Join successful sub-band if the server doesn't include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
669	669
670		-
671	671	=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
672	672
	739	+(((
673	673	(% style="color:blue" %)**Default Uplink channel:**
	741	+)))
674	674
	743	+(((
675	675	923.2 - SF7BW125 to SF10BW125
	745	+)))
676	676
	747	+(((
677	677	923.4 - SF7BW125 to SF10BW125
	749	+)))
678	678
	751	+(((
	752	+
	753	+)))
679	679
	755	+(((
680	680	(% style="color:blue" %)**Additional Uplink Channel**:
	757	+)))
681	681
	759	+(((
682	682	(OTAA mode, channel added by JoinAccept message)
	761	+)))
683	683
	763	+(((
	764	+
	765	+)))
684	684
	767	+(((
685	685	(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
	769	+)))
686	686
	771	+(((
687	687	922.2 - SF7BW125 to SF10BW125
	773	+)))
688	688
	775	+(((
689	689	922.4 - SF7BW125 to SF10BW125
	777	+)))
690	690
	779	+(((
691	691	922.6 - SF7BW125 to SF10BW125
	781	+)))
692	692
	783	+(((
693	693	922.8 - SF7BW125 to SF10BW125
	785	+)))
694	694
	787	+(((
695	695	923.0 - SF7BW125 to SF10BW125
	789	+)))
696	696
	791	+(((
697	697	922.0 - SF7BW125 to SF10BW125
	793	+)))
698	698
	795	+(((
	796	+
	797	+)))
699	699
	799	+(((
700	700	(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
	801	+)))
701	701
	803	+(((
702	702	923.6 - SF7BW125 to SF10BW125
	805	+)))
703	703
	807	+(((
704	704	923.8 - SF7BW125 to SF10BW125
	809	+)))
705	705
	811	+(((
706	706	924.0 - SF7BW125 to SF10BW125
	813	+)))
707	707
	815	+(((
708	708	924.2 - SF7BW125 to SF10BW125
	817	+)))
709	709
	819	+(((
710	710	924.4 - SF7BW125 to SF10BW125
	821	+)))
711	711
	823	+(((
712	712	924.6 - SF7BW125 to SF10BW125
	825	+)))
713	713
	827	+(((
	828	+
	829	+)))
714	714
	831	+(((
715	715	(% style="color:blue" %)**Downlink:**
	833	+)))
716	716
	835	+(((
717	717	Uplink channels 1-8 (RX1)
	837	+)))
718	718
	839	+(((
719	719	923.2 - SF10BW125 (RX2)
	841	+)))
720	720
721	721
722	722
723	723	=== 2.8.6 KR920-923 (KR920) ===
724	724
	847	+(((
725	725	(% style="color:blue" %)**Default channel:**
	849	+)))
726	726
	851	+(((
727	727	922.1 - SF7BW125 to SF12BW125
	853	+)))
728	728
	855	+(((
729	729	922.3 - SF7BW125 to SF12BW125
	857	+)))
730	730
	859	+(((
731	731	922.5 - SF7BW125 to SF12BW125
	861	+)))
732	732
	863	+(((
	864	+
	865	+)))
733	733
	867	+(((
734	734	(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
	869	+)))
735	735
	871	+(((
736	736	922.1 - SF7BW125 to SF12BW125
	873	+)))
737	737
	875	+(((
738	738	922.3 - SF7BW125 to SF12BW125
	877	+)))
739	739
	879	+(((
740	740	922.5 - SF7BW125 to SF12BW125
	881	+)))
741	741
	883	+(((
742	742	922.7 - SF7BW125 to SF12BW125
	885	+)))
743	743
	887	+(((
744	744	922.9 - SF7BW125 to SF12BW125
	889	+)))
745	745
	891	+(((
746	746	923.1 - SF7BW125 to SF12BW125
	893	+)))
747	747
	895	+(((
748	748	923.3 - SF7BW125 to SF12BW125
	897	+)))
749	749
	899	+(((
	900	+
	901	+)))
750	750
	903	+(((
751	751	(% style="color:blue" %)**Downlink:**
	905	+)))
752	752
	907	+(((
753	753	Uplink channels 1-7(RX1)
	909	+)))
754	754
	911	+(((
755	755	921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
	913	+)))
756	756
757	757
758	758
759	759	=== 2.8.7 IN865-867 (IN865) ===
760	760
	919	+(((
761	761	(% style="color:blue" %)**Uplink:**
	921	+)))
762	762
	923	+(((
763	763	865.0625 - SF7BW125 to SF12BW125
	925	+)))
764	764
	927	+(((
765	765	865.4025 - SF7BW125 to SF12BW125
	929	+)))
766	766
	931	+(((
767	767	865.9850 - SF7BW125 to SF12BW125
	933	+)))
768	768
	935	+(((
	936	+
	937	+)))
769	769
	939	+(((
770	770	(% style="color:blue" %)**Downlink:**
	941	+)))
771	771
	943	+(((
772	772	Uplink channels 1-3 (RX1)
	945	+)))
773	773
	947	+(((
774	774	866.550 - SF10BW125 (RX2)
	949	+)))
775	775
776	776
777	777
...	...	@@ -782,7 +782,6 @@
782	782	* The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
783	783	* Blink once when device transmit a packet.
784	784
785		-
786	786	== 2.10 ​Firmware Change Log ==
787	787
788	788
...	...	@@ -797,26 +797,51 @@
797	797
798	798	= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
799	799
	974	+(((
800	800	Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
	976	+)))
801	801
802		-* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
803		-* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	978	+* (((
	979	+AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
	980	+)))
	981	+* (((
	982	+LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	983	+)))
804	804
	985	+(((
805	805	There are two kinds of commands to configure LSPH01, they are:
	987	+)))
806	806
807		-* (% style="color:#4f81bd" %)** General Commands**.
	989	+* (((
	990	+(% style="color:#4f81bd" %)** General Commands**.
	991	+)))
808	808
	993	+(((
809	809	These commands are to configure:
	995	+)))
810	810
811		-* General system settings like: uplink interval.
812		-* LoRaWAN protocol & radio related command.
	997	+* (((
	998	+General system settings like: uplink interval.
	999	+)))
	1000	+* (((
	1001	+LoRaWAN protocol & radio related command.
	1002	+)))
813	813
814		-They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	1004	+(((
	1005	+They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki: [[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	1006	+)))
815	815
	1008	+(((
	1009	+
	1010	+)))
816	816
817		-* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1012	+* (((
	1013	+(% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1014	+)))
818	818
	1016	+(((
819	819	These commands only valid for LSPH01, as below:
	1018	+)))
820	820
821	821
822	822
...	...	@@ -829,17 +829,27 @@
829	829	[[image:image-20220607171554-8.png]]
830	830
831	831
832		-
	1031	+(((
833	833	(% style="color:#037691" %)**Downlink Command: 0x01**
	1033	+)))
834	834
	1035	+(((
835	835	Format: Command Code (0x01) followed by 3 bytes time value.
	1037	+)))
836	836
	1039	+(((
837	837	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	1041	+)))
838	838
839		-* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
840		-* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	1043	+* (((
	1044	+Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	1045	+)))
	1046	+* (((
	1047	+Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
841	841
842	842
	1050	+
	1051	+)))
843	843
844	844	== 3.2 Set Interrupt Mode ==
845	845
...	...	@@ -847,21 +847,36 @@
847	847
848	848	(% style="color:#037691" %)**AT Command: AT+INTMOD**
849	849
850		-[[image:image-20220607171716-9.png]]
	1059	+[[image:image-20220610105907-1.png]]
851	851
852	852
	1062	+(((
853	853	(% style="color:#037691" %)**Downlink Command: 0x06**
	1064	+)))
854	854
	1066	+(((
855	855	Format: Command Code (0x06) followed by 3 bytes.
	1068	+)))
856	856
	1070	+(((
857	857	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
	1072	+)))
858	858
859		-* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
860		-* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1074	+* (((
	1075	+Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
	1076	+)))
	1077	+* (((
	1078	+Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1079	+)))
861	861
	1081	+(((
	1082	+
	1083	+)))
	1084	+
	1085	+
862	862	== 3.3 Calibrate Sensor ==
863	863
864		-Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
	1088	+Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
865	865
866	866
867	867
...	...	@@ -893,14 +893,14 @@
893	893
894	894	Version
895	895	)))|Sensor Type|Reserve|(((
896		-[[Message Type>>path:#H2.3.6MessageType]]
	1120	+[[Message Type>>||anchor="H2.3.6MessageType"]]
897	897	Always 0x02
898	898	)))
899	899
900		-**Software Type**: Always 0x03 for LSPH01
	1124	+(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LSPH01
901	901
902	902
903		-**Frequency Band**:
	1127	+(% style="color:#037691" %)**Frequency Band**:
904	904
905	905	*0x01: EU868
906	906
...	...	@@ -923,13 +923,13 @@
923	923	*0xa0: AS923-3
924	924
925	925
926		-**Sub-Band**: value 0x00 ~~ 0x08
	1150	+(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
927	927
928	928
929		-**Firmware Version**: 0x0100, Means: v1.0.0 version
	1153	+(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
930	930
931	931
932		-**Sensor Type**:
	1156	+(% style="color:#037691" %)**Sensor Type**:
933	933
934	934	0x01: LSE01
935	935
...	...	@@ -956,7 +956,7 @@
956	956	)))
957	957
958	958	(((
959		-The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
	1183	+The discharge curve is not linear so can't simply use percentage to show the battery level. Below is the battery performance.
960	960	)))
961	961
962	962	[[image:1654593587246-335.png]]
...	...	@@ -991,12 +991,12 @@
991	991	)))
992	992
993	993
994		-**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
	1218	+(% style="color:#037691" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
995	995
996	996	[[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
997	997
998	998
999		-**Step 2**: Open it and choose
	1223	+(% style="color:#037691" %)**Step 2**(%%): Open it and choose
1000	1000
1001	1001	* Product Model
1002	1002	* Uplink Interval
...	...	@@ -1010,13 +1010,13 @@
1010	1010	The battery related documents as below:
1011	1011
1012	1012	* (((
1013		-[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
	1237	+[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
1014	1014	)))
1015	1015	* (((
1016	1016	[[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
1017	1017	)))
1018	1018	* (((
1019		-[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
	1243	+[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
1020	1020	)))
1021	1021
1022	1022	[[image:image-20220607172042-11.png]]
...	...	@@ -1033,9 +1033,13 @@
1033	1033
1034	1034	=== ​4.3.2 Replace the battery ===
1035	1035
1036		-You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
	1260	+(((
	1261	+You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
	1262	+)))
1037	1037
1038		-The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
	1264	+(((
	1265	+The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
	1266	+)))
1039	1039
1040	1040
1041	1041
...	...	@@ -1056,29 +1056,29 @@
1056	1056	(% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1057	1057
1058	1058
	1287	+(((
1059	1059	In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
	1289	+)))
1060	1060
1061	1061
1062	1062	[[image:1654593712276-618.png]]
1063	1063
1064		-Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
	1294	+Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1065	1065
1066	1066
1067		-
1068	1068	= 6. FAQ =
1069	1069
1070	1070	== 6.1 How to change the LoRa Frequency Bands/Region ==
1071	1071
1072		-You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
	1301	+You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1073	1073	When downloading the images, choose the required image file for download. ​
1074	1074
1075	1075
1076		-
1077	1077	= 7. Trouble Shooting =
1078	1078
1079		-== 7.1 AT Commands input doesn’t work ==
	1307	+== 7.1 AT Commands input doesn't work ==
1080	1080
1081		-In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
	1309	+In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1082	1082
1083	1083
1084	1084
...	...	@@ -1098,6 +1098,7 @@
1098	1098	* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1099	1099	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1100	1100
	1329	+
1101	1101	= 9. ​Packing Info =
1102	1102
1103	1103
...	...	@@ -1112,6 +1112,7 @@
1112	1112	* Package Size / pcs : cm
1113	1113	* Weight / pcs : g
1114	1114
	1344	+
1115	1115	= 10. ​Support =
1116	1116
1117	1117	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

image-20220610105907-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+15.5 KB

Content