Skip to Content
Last modified by Xiaoling on 2025/04/25 14:08
From version 74.4
edited by Xiaoling
on 2022/06/07 17:48
Change comment: There is no comment for this version
To version 92.1
edited by Xiaoling
on 2022/06/25 17:01
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -4,74 +4,31 @@
4 4  
5 5  
6 6  
7 -**Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 65  
66 66  
12 +**Table of Contents:**
67 67  
14 +{{toc/}}
68 68  
69 69  
17 +
18 +
19 +
20 +
21 +
22 +
23 +
24 +
70 70  = 1. Introduction =
71 71  
72 72  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
73 73  
74 74  (((
30 +
31 +
75 75  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
76 76  )))
77 77  
... ... @@ -96,6 +96,7 @@
96 96  
97 97  
98 98  
56 +
99 99  == ​1.2 Features ==
100 100  
101 101  * LoRaWAN 1.0.3 Class A
... ... @@ -113,6 +113,9 @@
113 113  * 8500mAh Battery for long term use
114 114  
115 115  
74 +
75 +
76 +
116 116  == 1.3 Probe Specification ==
117 117  
118 118  
... ... @@ -134,11 +134,17 @@
134 134  * Length: 3.5 meters
135 135  
136 136  
98 +
99 +
100 +
137 137  == 1.4 ​Applications ==
138 138  
139 139  * Smart Agriculture
140 140  
141 141  
106 +
107 +
108 +
142 142  == 1.5 Pin mapping and power on ==
143 143  
144 144  [[image:1654592472094-134.png]]
... ... @@ -154,7 +154,7 @@
154 154  )))
155 155  
156 156  (((
157 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
124 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
158 158  )))
159 159  
160 160  
... ... @@ -166,10 +166,14 @@
166 166  
167 167  (((
168 168  [[image:1654592492399-921.png]]
136 +
137 +
169 169  )))
170 170  
171 171  (((
172 172  The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
142 +
143 +
173 173  )))
174 174  
175 175  (((
... ... @@ -193,11 +193,13 @@
193 193  [[image:1654592600093-601.png]]
194 194  
195 195  
167 +
196 196  **Add APP EUI and DEV EUI**
197 197  
198 198  [[image:1654592619856-881.png]]
199 199  
200 200  
173 +
201 201  **Add APP EUI in the application**
202 202  
203 203  [[image:1654592632656-512.png]]
... ... @@ -240,19 +240,17 @@
240 240  )))
241 241  
242 242  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
243 -|(((
244 -**Size**
216 +|=(% style="width: 62.5px;" %)(((
217 +**Size (bytes)**
218 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
219 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
220 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
245 245  
246 -**(bytes)**
247 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
248 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
249 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
250 -
251 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
252 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
253 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
222 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
223 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
224 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
254 254  )))|Reserve|(((
255 -[[Message Type>>path:#H2.3.6MessageType]]
226 +[[Message Type>>||anchor="H2.3.6MessageType"]]
256 256  )))
257 257  
258 258  [[image:1654592721645-318.png]]
... ... @@ -308,7 +308,7 @@
308 308  
309 309  === 2.3.5 Interrupt Pin ===
310 310  
311 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
282 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
312 312  
313 313  
314 314  **Example:**
... ... @@ -330,14 +330,16 @@
330 330  )))
331 331  
332 332  
333 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
334 -|=**Message Type Code**|=**Description**|=**Payload**
335 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
336 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
337 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
304 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
305 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
306 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
307 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
308 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
338 338  
339 339  
340 340  
312 +
313 +
341 341  === 2.3.7 Decode payload in The Things Network ===
342 342  
343 343  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -357,7 +357,7 @@
357 357  
358 358  == 2.4 Uplink Interval ==
359 359  
360 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
333 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
361 361  
362 362  
363 363  
... ... @@ -507,9 +507,13 @@
507 507  
508 508  == 2.7 Calibration ==
509 509  
483 +(((
510 510  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
485 +)))
511 511  
487 +(((
512 512  After stable, user can use below command to calibrate.
489 +)))
513 513  
514 514  [[image:image-20220607171149-4.png]]
515 515  
... ... @@ -516,12 +516,10 @@
516 516  
517 517  (% style="color:#037691" %)**Calibration Payload**
518 518  
519 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
520 -|(((
521 -**Size**
522 -
523 -**(bytes)**
524 -)))|**1**|**1**|**1**|**7**|**1**
496 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
497 +|=(% style="width: 62.5px;" %)(((
498 +**Size (bytes)**
499 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
525 525  |**Value**|(((
526 526  PH4
527 527  
... ... @@ -531,7 +531,7 @@
531 531  
532 532  Calibrate value
533 533  )))|Reserve|(((
534 -[[Message Type>>path:#H2.3.6MessageType]]
509 +[[Message Type>>||anchor="H2.3.6MessageType"]]
535 535  
536 536  Always 0x03
537 537  )))
... ... @@ -544,8 +544,6 @@
544 544  * Reply to the confirmation package: 14 01
545 545  * Reply to non-confirmed packet: 14 00
546 546  
547 -
548 -
549 549  == 2.8 Frequency Plans ==
550 550  
551 551  (((
... ... @@ -555,32 +555,61 @@
555 555  
556 556  === 2.8.1 EU863-870 (EU868) ===
557 557  
531 +(((
558 558  (% style="color:blue" %)**Uplink:**
533 +)))
559 559  
535 +(((
560 560  868.1 - SF7BW125 to SF12BW125
537 +)))
561 561  
539 +(((
562 562  868.3 - SF7BW125 to SF12BW125 and SF7BW250
541 +)))
563 563  
543 +(((
564 564  868.5 - SF7BW125 to SF12BW125
545 +)))
565 565  
547 +(((
566 566  867.1 - SF7BW125 to SF12BW125
549 +)))
567 567  
551 +(((
568 568  867.3 - SF7BW125 to SF12BW125
553 +)))
569 569  
555 +(((
570 570  867.5 - SF7BW125 to SF12BW125
557 +)))
571 571  
559 +(((
572 572  867.7 - SF7BW125 to SF12BW125
561 +)))
573 573  
563 +(((
574 574  867.9 - SF7BW125 to SF12BW125
565 +)))
575 575  
567 +(((
576 576  868.8 - FSK
569 +)))
577 577  
571 +(((
572 +
573 +)))
578 578  
575 +(((
579 579  (% style="color:blue" %)**Downlink:**
577 +)))
580 580  
579 +(((
581 581  Uplink channels 1-9 (RX1)
581 +)))
582 582  
583 +(((
583 583  869.525 - SF9BW125 (RX2 downlink only)
585 +)))
584 584  
585 585  
586 586  
... ... @@ -601,48 +601,95 @@
601 601  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
602 602  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
603 603  
606 +
607 +
608 +
609 +
604 604  === 2.8.3 CN470-510 (CN470) ===
605 605  
612 +(((
606 606  Used in China, Default use CHE=1
614 +)))
607 607  
616 +(((
608 608  (% style="color:blue" %)**Uplink:**
618 +)))
609 609  
620 +(((
610 610  486.3 - SF7BW125 to SF12BW125
622 +)))
611 611  
624 +(((
612 612  486.5 - SF7BW125 to SF12BW125
626 +)))
613 613  
628 +(((
614 614  486.7 - SF7BW125 to SF12BW125
630 +)))
615 615  
632 +(((
616 616  486.9 - SF7BW125 to SF12BW125
634 +)))
617 617  
636 +(((
618 618  487.1 - SF7BW125 to SF12BW125
638 +)))
619 619  
640 +(((
620 620  487.3 - SF7BW125 to SF12BW125
642 +)))
621 621  
644 +(((
622 622  487.5 - SF7BW125 to SF12BW125
646 +)))
623 623  
648 +(((
624 624  487.7 - SF7BW125 to SF12BW125
650 +)))
625 625  
652 +(((
653 +
654 +)))
626 626  
656 +(((
627 627  (% style="color:blue" %)**Downlink:**
658 +)))
628 628  
660 +(((
629 629  506.7 - SF7BW125 to SF12BW125
662 +)))
630 630  
664 +(((
631 631  506.9 - SF7BW125 to SF12BW125
666 +)))
632 632  
668 +(((
633 633  507.1 - SF7BW125 to SF12BW125
670 +)))
634 634  
672 +(((
635 635  507.3 - SF7BW125 to SF12BW125
674 +)))
636 636  
676 +(((
637 637  507.5 - SF7BW125 to SF12BW125
678 +)))
638 638  
680 +(((
639 639  507.7 - SF7BW125 to SF12BW125
682 +)))
640 640  
684 +(((
641 641  507.9 - SF7BW125 to SF12BW125
686 +)))
642 642  
688 +(((
643 643  508.1 - SF7BW125 to SF12BW125
690 +)))
644 644  
692 +(((
645 645  505.3 - SF12BW125 (RX2 downlink only)
694 +)))
646 646  
647 647  
648 648  
... ... @@ -668,110 +668,222 @@
668 668  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
669 669  
670 670  
720 +
721 +
722 +
671 671  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
672 672  
725 +(((
673 673  (% style="color:blue" %)**Default Uplink channel:**
727 +)))
674 674  
729 +(((
675 675  923.2 - SF7BW125 to SF10BW125
731 +)))
676 676  
733 +(((
677 677  923.4 - SF7BW125 to SF10BW125
735 +)))
678 678  
737 +(((
738 +
739 +)))
679 679  
741 +(((
680 680  (% style="color:blue" %)**Additional Uplink Channel**:
743 +)))
681 681  
745 +(((
682 682  (OTAA mode, channel added by JoinAccept message)
747 +)))
683 683  
749 +(((
750 +
751 +)))
684 684  
753 +(((
685 685  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
755 +)))
686 686  
757 +(((
687 687  922.2 - SF7BW125 to SF10BW125
759 +)))
688 688  
761 +(((
689 689  922.4 - SF7BW125 to SF10BW125
763 +)))
690 690  
765 +(((
691 691  922.6 - SF7BW125 to SF10BW125
767 +)))
692 692  
769 +(((
693 693  922.8 - SF7BW125 to SF10BW125
771 +)))
694 694  
773 +(((
695 695  923.0 - SF7BW125 to SF10BW125
775 +)))
696 696  
777 +(((
697 697  922.0 - SF7BW125 to SF10BW125
779 +)))
698 698  
781 +(((
782 +
783 +)))
699 699  
785 +(((
700 700  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
787 +)))
701 701  
789 +(((
702 702  923.6 - SF7BW125 to SF10BW125
791 +)))
703 703  
793 +(((
704 704  923.8 - SF7BW125 to SF10BW125
795 +)))
705 705  
797 +(((
706 706  924.0 - SF7BW125 to SF10BW125
799 +)))
707 707  
801 +(((
708 708  924.2 - SF7BW125 to SF10BW125
803 +)))
709 709  
805 +(((
710 710  924.4 - SF7BW125 to SF10BW125
807 +)))
711 711  
809 +(((
712 712  924.6 - SF7BW125 to SF10BW125
811 +)))
713 713  
813 +(((
814 +
815 +)))
714 714  
817 +(((
715 715  (% style="color:blue" %)**Downlink:**
819 +)))
716 716  
821 +(((
717 717  Uplink channels 1-8 (RX1)
823 +)))
718 718  
825 +(((
719 719  923.2 - SF10BW125 (RX2)
827 +)))
720 720  
721 721  
722 722  
723 723  === 2.8.6 KR920-923 (KR920) ===
724 724  
833 +(((
725 725  (% style="color:blue" %)**Default channel:**
835 +)))
726 726  
837 +(((
727 727  922.1 - SF7BW125 to SF12BW125
839 +)))
728 728  
841 +(((
729 729  922.3 - SF7BW125 to SF12BW125
843 +)))
730 730  
845 +(((
731 731  922.5 - SF7BW125 to SF12BW125
847 +)))
732 732  
849 +(((
850 +
851 +)))
733 733  
853 +(((
734 734  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
855 +)))
735 735  
857 +(((
736 736  922.1 - SF7BW125 to SF12BW125
859 +)))
737 737  
861 +(((
738 738  922.3 - SF7BW125 to SF12BW125
863 +)))
739 739  
865 +(((
740 740  922.5 - SF7BW125 to SF12BW125
867 +)))
741 741  
869 +(((
742 742  922.7 - SF7BW125 to SF12BW125
871 +)))
743 743  
873 +(((
744 744  922.9 - SF7BW125 to SF12BW125
875 +)))
745 745  
877 +(((
746 746  923.1 - SF7BW125 to SF12BW125
879 +)))
747 747  
881 +(((
748 748  923.3 - SF7BW125 to SF12BW125
883 +)))
749 749  
885 +(((
886 +
887 +)))
750 750  
889 +(((
751 751  (% style="color:blue" %)**Downlink:**
891 +)))
752 752  
893 +(((
753 753  Uplink channels 1-7(RX1)
895 +)))
754 754  
897 +(((
755 755  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
899 +)))
756 756  
757 757  
758 758  
759 759  === 2.8.7 IN865-867 (IN865) ===
760 760  
905 +(((
761 761  (% style="color:blue" %)**Uplink:**
907 +)))
762 762  
909 +(((
763 763  865.0625 - SF7BW125 to SF12BW125
911 +)))
764 764  
913 +(((
765 765  865.4025 - SF7BW125 to SF12BW125
915 +)))
766 766  
917 +(((
767 767  865.9850 - SF7BW125 to SF12BW125
919 +)))
768 768  
921 +(((
922 +
923 +)))
769 769  
925 +(((
770 770  (% style="color:blue" %)**Downlink:**
927 +)))
771 771  
929 +(((
772 772  Uplink channels 1-3 (RX1)
931 +)))
773 773  
933 +(((
774 774  866.550 - SF10BW125 (RX2)
935 +)))
775 775  
776 776  
777 777  
... ... @@ -783,6 +783,9 @@
783 783  * Blink once when device transmit a packet.
784 784  
785 785  
947 +
948 +
949 +
786 786  == 2.10 ​Firmware Change Log ==
787 787  
788 788  
... ... @@ -797,26 +797,51 @@
797 797  
798 798  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
799 799  
964 +(((
800 800  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
966 +)))
801 801  
802 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
803 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
968 +* (((
969 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
970 +)))
971 +* (((
972 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
973 +)))
804 804  
975 +(((
805 805  There are two kinds of commands to configure LSPH01, they are:
977 +)))
806 806  
807 -* (% style="color:#4f81bd" %)** General Commands**.
979 +* (((
980 +(% style="color:#4f81bd" %)** General Commands**.
981 +)))
808 808  
983 +(((
809 809  These commands are to configure:
985 +)))
810 810  
811 -* General system settings like: uplink interval.
812 -* LoRaWAN protocol & radio related command.
987 +* (((
988 +General system settings like: uplink interval.
989 +)))
990 +* (((
991 +LoRaWAN protocol & radio related command.
992 +)))
813 813  
994 +(((
814 814  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
996 +)))
815 815  
998 +(((
999 +
1000 +)))
816 816  
817 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
1002 +* (((
1003 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
1004 +)))
818 818  
1006 +(((
819 819  These commands only valid for LSPH01, as below:
1008 +)))
820 820  
821 821  
822 822  
... ... @@ -829,17 +829,27 @@
829 829  [[image:image-20220607171554-8.png]]
830 830  
831 831  
832 -
1021 +(((
833 833  (% style="color:#037691" %)**Downlink Command: 0x01**
1023 +)))
834 834  
1025 +(((
835 835  Format: Command Code (0x01) followed by 3 bytes time value.
1027 +)))
836 836  
1029 +(((
837 837  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1031 +)))
838 838  
839 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
840 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1033 +* (((
1034 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1035 +)))
1036 +* (((
1037 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
841 841  
842 842  
1040 +
1041 +)))
843 843  
844 844  == 3.2 Set Interrupt Mode ==
845 845  
... ... @@ -847,21 +847,37 @@
847 847  
848 848  (% style="color:#037691" %)**AT Command: AT+INTMOD**
849 849  
850 -[[image:image-20220607171716-9.png]]
1049 +[[image:image-20220610105907-1.png]]
851 851  
852 852  
1052 +(((
853 853  (% style="color:#037691" %)**Downlink Command: 0x06**
1054 +)))
854 854  
1056 +(((
855 855  Format: Command Code (0x06) followed by 3 bytes.
1058 +)))
856 856  
1060 +(((
857 857  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1062 +)))
858 858  
859 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
860 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1064 +* (((
1065 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1066 +)))
1067 +* (((
1068 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1069 +)))
861 861  
1071 +(((
1072 +
1073 +)))
1074 +
1075 +
1076 +
862 862  == 3.3 Calibrate Sensor ==
863 863  
864 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1079 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
865 865  
866 866  
867 867  
... ... @@ -893,14 +893,14 @@
893 893  
894 894  Version
895 895  )))|Sensor Type|Reserve|(((
896 -[[Message Type>>path:#H2.3.6MessageType]]
1111 +[[Message Type>>||anchor="H2.3.6MessageType"]]
897 897  Always 0x02
898 898  )))
899 899  
900 -**Software Type**: Always 0x03 for LSPH01
1115 +(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LSPH01
901 901  
902 902  
903 -**Frequency Band**:
1118 +(% style="color:#037691" %)**Frequency Band**:
904 904  
905 905  *0x01: EU868
906 906  
... ... @@ -923,13 +923,13 @@
923 923  *0xa0: AS923-3
924 924  
925 925  
926 -**Sub-Band**: value 0x00 ~~ 0x08
1141 +(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
927 927  
928 928  
929 -**Firmware Version**: 0x0100, Means: v1.0.0 version
1144 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
930 930  
931 931  
932 -**Sensor Type**:
1147 +(% style="color:#037691" %)**Sensor Type**:
933 933  
934 934  0x01: LSE01
935 935  
... ... @@ -956,7 +956,7 @@
956 956  )))
957 957  
958 958  (((
959 -The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1174 +The discharge curve is not linear so can't simply use percentage to show the battery level. Below is the battery performance.
960 960  )))
961 961  
962 962  [[image:1654593587246-335.png]]
... ... @@ -991,12 +991,12 @@
991 991  )))
992 992  
993 993  
994 -**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
1209 +(% style="color:red" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
995 995  
996 996  [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
997 997  
998 998  
999 -**Step 2**: Open it and choose
1214 +(% style="color:#037691" %)**Step 2**(%%): Open it and choose
1000 1000  
1001 1001  * Product Model
1002 1002  * Uplink Interval
... ... @@ -1010,13 +1010,13 @@
1010 1010  The battery related documents as below:
1011 1011  
1012 1012  * (((
1013 -[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
1228 +[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
1014 1014  )))
1015 1015  * (((
1016 1016  [[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
1017 1017  )))
1018 1018  * (((
1019 -[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
1234 +[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
1020 1020  )))
1021 1021  
1022 1022  [[image:image-20220607172042-11.png]]
... ... @@ -1033,9 +1033,13 @@
1033 1033  
1034 1034  === ​4.3.2 Replace the battery ===
1035 1035  
1036 -You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1251 +(((
1252 +You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
1253 +)))
1037 1037  
1255 +(((
1038 1038  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1257 +)))
1039 1039  
1040 1040  
1041 1041  
... ... @@ -1056,29 +1056,29 @@
1056 1056  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1057 1057  
1058 1058  
1278 +(((
1059 1059  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1280 +)))
1060 1060  
1061 1061  
1062 1062   [[image:1654593712276-618.png]]
1063 1063  
1064 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1285 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1065 1065  
1066 1066  
1067 -
1068 1068  = 6. FAQ =
1069 1069  
1070 1070  == 6.1 How to change the LoRa Frequency Bands/Region ==
1071 1071  
1072 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1292 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1073 1073  When downloading the images, choose the required image file for download. ​
1074 1074  
1075 1075  
1076 -
1077 1077  = 7. Trouble Shooting =
1078 1078  
1079 -== 7.1 AT Commands input doesn’t work ==
1298 +== 7.1 AT Commands input doesn't work ==
1080 1080  
1081 -In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1300 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1082 1082  
1083 1083  
1084 1084  
... ... @@ -1098,6 +1098,8 @@
1098 1098  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1099 1099  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1100 1100  
1320 +
1321 +
1101 1101  = 9. ​Packing Info =
1102 1102  
1103 1103  
... ... @@ -1112,6 +1112,8 @@
1112 1112  * Package Size / pcs : cm
1113 1113  * Weight / pcs : g
1114 1114  
1336 +
1337 +
1115 1115  = 10. ​Support =
1116 1116  
1117 1117  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
image-20220610105907-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +15.5 KB
Content