Skip to Content
Last modified by Xiaoling on 2025/04/25 14:08
From version 74.3
edited by Xiaoling
on 2022/06/07 17:47
Change comment: There is no comment for this version
To version 95.1
edited by Xiaoling
on 2022/06/25 17:10
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -4,74 +4,31 @@
4 4  
5 5  
6 6  
7 -**Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 65  
66 66  
12 +**Table of Contents:**
67 67  
14 +{{toc/}}
68 68  
69 69  
17 +
18 +
19 +
20 +
21 +
22 +
23 +
24 +
70 70  = 1. Introduction =
71 71  
72 72  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
73 73  
74 74  (((
30 +
31 +
75 75  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
76 76  )))
77 77  
... ... @@ -96,6 +96,7 @@
96 96  
97 97  
98 98  
56 +
99 99  == ​1.2 Features ==
100 100  
101 101  * LoRaWAN 1.0.3 Class A
... ... @@ -112,7 +112,6 @@
112 112  * IP68 rate for the Sensor Probe
113 113  * 8500mAh Battery for long term use
114 114  
115 -
116 116  == 1.3 Probe Specification ==
117 117  
118 118  
... ... @@ -133,12 +133,10 @@
133 133  * IP68 Protection
134 134  * Length: 3.5 meters
135 135  
136 -
137 137  == 1.4 ​Applications ==
138 138  
139 139  * Smart Agriculture
140 140  
141 -
142 142  == 1.5 Pin mapping and power on ==
143 143  
144 144  [[image:1654592472094-134.png]]
... ... @@ -154,7 +154,7 @@
154 154  )))
155 155  
156 156  (((
157 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
112 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
158 158  )))
159 159  
160 160  
... ... @@ -166,10 +166,14 @@
166 166  
167 167  (((
168 168  [[image:1654592492399-921.png]]
124 +
125 +
169 169  )))
170 170  
171 171  (((
172 172  The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
130 +
131 +
173 173  )))
174 174  
175 175  (((
... ... @@ -193,11 +193,13 @@
193 193  [[image:1654592600093-601.png]]
194 194  
195 195  
155 +
196 196  **Add APP EUI and DEV EUI**
197 197  
198 198  [[image:1654592619856-881.png]]
199 199  
200 200  
161 +
201 201  **Add APP EUI in the application**
202 202  
203 203  [[image:1654592632656-512.png]]
... ... @@ -240,19 +240,17 @@
240 240  )))
241 241  
242 242  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
243 -|(((
244 -**Size**
204 +|=(% style="width: 62.5px;" %)(((
205 +**Size (bytes)**
206 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
207 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
208 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
245 245  
246 -**(bytes)**
247 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
248 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
249 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
250 -
251 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
252 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
253 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
210 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
211 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
212 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
254 254  )))|Reserve|(((
255 -[[Message Type>>path:#H2.3.6MessageType]]
214 +[[Message Type>>||anchor="H2.3.6MessageType"]]
256 256  )))
257 257  
258 258  [[image:1654592721645-318.png]]
... ... @@ -308,7 +308,7 @@
308 308  
309 309  === 2.3.5 Interrupt Pin ===
310 310  
311 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
270 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
312 312  
313 313  
314 314  **Example:**
... ... @@ -330,14 +330,12 @@
330 330  )))
331 331  
332 332  
333 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
334 -|=**Message Type Code**|=**Description**|=**Payload**
335 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
336 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
337 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
292 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
293 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
294 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
295 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
296 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
338 338  
339 -
340 -
341 341  === 2.3.7 Decode payload in The Things Network ===
342 342  
343 343  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -357,7 +357,7 @@
357 357  
358 358  == 2.4 Uplink Interval ==
359 359  
360 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
317 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
361 361  
362 362  
363 363  
... ... @@ -429,8 +429,10 @@
429 429  === 2.6.1 Before measurement ===
430 430  
431 431  (((
389 +(((
432 432  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
433 433  )))
392 +)))
434 434  
435 435  
436 436  
... ... @@ -437,24 +437,45 @@
437 437  === 2.6.2 Measurement ===
438 438  
439 439  
399 +(((
440 440  (% style="color:#4f81bd" %)**Measurement the soil surface:**
401 +)))
441 441  
403 +(((
442 442  [[image:1654592946732-634.png]]
405 +)))
443 443  
407 +(((
444 444  Choose the proper measuring position. Split the surface soil according to the measured deep.
409 +)))
445 445  
411 +(((
446 446  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
413 +)))
447 447  
415 +(((
448 448  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
417 +)))
449 449  
419 +(((
450 450  Put soil over the probe after insert. And start to measure.
421 +)))
451 451  
423 +(((
424 +
425 +)))
452 452  
427 +(((
453 453  (% style="color:#4f81bd" %)**Measurement inside soil:**
429 +)))
454 454  
431 +(((
455 455  Dig a hole with diameter > 20CM.
433 +)))
456 456  
435 +(((
457 457  Insert the probe inside, method like measure the surface.
437 +)))
458 458  
459 459  
460 460  
... ... @@ -484,9 +484,13 @@
484 484  
485 485  == 2.7 Calibration ==
486 486  
467 +(((
487 487  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
469 +)))
488 488  
471 +(((
489 489  After stable, user can use below command to calibrate.
473 +)))
490 490  
491 491  [[image:image-20220607171149-4.png]]
492 492  
... ... @@ -493,12 +493,10 @@
493 493  
494 494  (% style="color:#037691" %)**Calibration Payload**
495 495  
496 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
497 -|(((
498 -**Size**
499 -
500 -**(bytes)**
501 -)))|**1**|**1**|**1**|**7**|**1**
480 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
481 +|=(% style="width: 62.5px;" %)(((
482 +**Size (bytes)**
483 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
502 502  |**Value**|(((
503 503  PH4
504 504  
... ... @@ -508,7 +508,7 @@
508 508  
509 509  Calibrate value
510 510  )))|Reserve|(((
511 -[[Message Type>>path:#H2.3.6MessageType]]
493 +[[Message Type>>||anchor="H2.3.6MessageType"]]
512 512  
513 513  Always 0x03
514 514  )))
... ... @@ -532,32 +532,61 @@
532 532  
533 533  === 2.8.1 EU863-870 (EU868) ===
534 534  
517 +(((
535 535  (% style="color:blue" %)**Uplink:**
519 +)))
536 536  
521 +(((
537 537  868.1 - SF7BW125 to SF12BW125
523 +)))
538 538  
525 +(((
539 539  868.3 - SF7BW125 to SF12BW125 and SF7BW250
527 +)))
540 540  
529 +(((
541 541  868.5 - SF7BW125 to SF12BW125
531 +)))
542 542  
533 +(((
543 543  867.1 - SF7BW125 to SF12BW125
535 +)))
544 544  
537 +(((
545 545  867.3 - SF7BW125 to SF12BW125
539 +)))
546 546  
541 +(((
547 547  867.5 - SF7BW125 to SF12BW125
543 +)))
548 548  
545 +(((
549 549  867.7 - SF7BW125 to SF12BW125
547 +)))
550 550  
549 +(((
551 551  867.9 - SF7BW125 to SF12BW125
551 +)))
552 552  
553 +(((
553 553  868.8 - FSK
555 +)))
554 554  
557 +(((
558 +
559 +)))
555 555  
561 +(((
556 556  (% style="color:blue" %)**Downlink:**
563 +)))
557 557  
565 +(((
558 558  Uplink channels 1-9 (RX1)
567 +)))
559 559  
569 +(((
560 560  869.525 - SF9BW125 (RX2 downlink only)
571 +)))
561 561  
562 562  
563 563  
... ... @@ -578,48 +578,97 @@
578 578  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
579 579  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
580 580  
592 +
593 +
594 +
595 +
596 +
597 +
581 581  === 2.8.3 CN470-510 (CN470) ===
582 582  
600 +(((
583 583  Used in China, Default use CHE=1
602 +)))
584 584  
604 +(((
585 585  (% style="color:blue" %)**Uplink:**
606 +)))
586 586  
608 +(((
587 587  486.3 - SF7BW125 to SF12BW125
610 +)))
588 588  
612 +(((
589 589  486.5 - SF7BW125 to SF12BW125
614 +)))
590 590  
616 +(((
591 591  486.7 - SF7BW125 to SF12BW125
618 +)))
592 592  
620 +(((
593 593  486.9 - SF7BW125 to SF12BW125
622 +)))
594 594  
624 +(((
595 595  487.1 - SF7BW125 to SF12BW125
626 +)))
596 596  
628 +(((
597 597  487.3 - SF7BW125 to SF12BW125
630 +)))
598 598  
632 +(((
599 599  487.5 - SF7BW125 to SF12BW125
634 +)))
600 600  
636 +(((
601 601  487.7 - SF7BW125 to SF12BW125
638 +)))
602 602  
640 +(((
641 +
642 +)))
603 603  
644 +(((
604 604  (% style="color:blue" %)**Downlink:**
646 +)))
605 605  
648 +(((
606 606  506.7 - SF7BW125 to SF12BW125
650 +)))
607 607  
652 +(((
608 608  506.9 - SF7BW125 to SF12BW125
654 +)))
609 609  
656 +(((
610 610  507.1 - SF7BW125 to SF12BW125
658 +)))
611 611  
660 +(((
612 612  507.3 - SF7BW125 to SF12BW125
662 +)))
613 613  
664 +(((
614 614  507.5 - SF7BW125 to SF12BW125
666 +)))
615 615  
668 +(((
616 616  507.7 - SF7BW125 to SF12BW125
670 +)))
617 617  
672 +(((
618 618  507.9 - SF7BW125 to SF12BW125
674 +)))
619 619  
676 +(((
620 620  508.1 - SF7BW125 to SF12BW125
678 +)))
621 621  
680 +(((
622 622  505.3 - SF12BW125 (RX2 downlink only)
682 +)))
623 623  
624 624  
625 625  
... ... @@ -645,110 +645,224 @@
645 645  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
646 646  
647 647  
708 +
709 +
710 +
711 +
712 +
648 648  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
649 649  
715 +(((
650 650  (% style="color:blue" %)**Default Uplink channel:**
717 +)))
651 651  
719 +(((
652 652  923.2 - SF7BW125 to SF10BW125
721 +)))
653 653  
723 +(((
654 654  923.4 - SF7BW125 to SF10BW125
725 +)))
655 655  
727 +(((
728 +
729 +)))
656 656  
731 +(((
657 657  (% style="color:blue" %)**Additional Uplink Channel**:
733 +)))
658 658  
735 +(((
659 659  (OTAA mode, channel added by JoinAccept message)
737 +)))
660 660  
739 +(((
740 +
741 +)))
661 661  
743 +(((
662 662  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
745 +)))
663 663  
747 +(((
664 664  922.2 - SF7BW125 to SF10BW125
749 +)))
665 665  
751 +(((
666 666  922.4 - SF7BW125 to SF10BW125
753 +)))
667 667  
755 +(((
668 668  922.6 - SF7BW125 to SF10BW125
757 +)))
669 669  
759 +(((
670 670  922.8 - SF7BW125 to SF10BW125
761 +)))
671 671  
763 +(((
672 672  923.0 - SF7BW125 to SF10BW125
765 +)))
673 673  
767 +(((
674 674  922.0 - SF7BW125 to SF10BW125
769 +)))
675 675  
771 +(((
772 +
773 +)))
676 676  
775 +(((
677 677  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
777 +)))
678 678  
779 +(((
679 679  923.6 - SF7BW125 to SF10BW125
781 +)))
680 680  
783 +(((
681 681  923.8 - SF7BW125 to SF10BW125
785 +)))
682 682  
787 +(((
683 683  924.0 - SF7BW125 to SF10BW125
789 +)))
684 684  
791 +(((
685 685  924.2 - SF7BW125 to SF10BW125
793 +)))
686 686  
795 +(((
687 687  924.4 - SF7BW125 to SF10BW125
797 +)))
688 688  
799 +(((
689 689  924.6 - SF7BW125 to SF10BW125
801 +)))
690 690  
803 +(((
804 +
805 +)))
691 691  
807 +(((
692 692  (% style="color:blue" %)**Downlink:**
809 +)))
693 693  
811 +(((
694 694  Uplink channels 1-8 (RX1)
813 +)))
695 695  
815 +(((
696 696  923.2 - SF10BW125 (RX2)
817 +)))
697 697  
698 698  
699 699  
700 700  === 2.8.6 KR920-923 (KR920) ===
701 701  
823 +(((
702 702  (% style="color:blue" %)**Default channel:**
825 +)))
703 703  
827 +(((
704 704  922.1 - SF7BW125 to SF12BW125
829 +)))
705 705  
831 +(((
706 706  922.3 - SF7BW125 to SF12BW125
833 +)))
707 707  
835 +(((
708 708  922.5 - SF7BW125 to SF12BW125
837 +)))
709 709  
839 +(((
840 +
841 +)))
710 710  
843 +(((
711 711  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
845 +)))
712 712  
847 +(((
713 713  922.1 - SF7BW125 to SF12BW125
849 +)))
714 714  
851 +(((
715 715  922.3 - SF7BW125 to SF12BW125
853 +)))
716 716  
855 +(((
717 717  922.5 - SF7BW125 to SF12BW125
857 +)))
718 718  
859 +(((
719 719  922.7 - SF7BW125 to SF12BW125
861 +)))
720 720  
863 +(((
721 721  922.9 - SF7BW125 to SF12BW125
865 +)))
722 722  
867 +(((
723 723  923.1 - SF7BW125 to SF12BW125
869 +)))
724 724  
871 +(((
725 725  923.3 - SF7BW125 to SF12BW125
873 +)))
726 726  
875 +(((
876 +
877 +)))
727 727  
879 +(((
728 728  (% style="color:blue" %)**Downlink:**
881 +)))
729 729  
883 +(((
730 730  Uplink channels 1-7(RX1)
885 +)))
731 731  
887 +(((
732 732  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
889 +)))
733 733  
734 734  
735 735  
736 736  === 2.8.7 IN865-867 (IN865) ===
737 737  
895 +(((
738 738  (% style="color:blue" %)**Uplink:**
897 +)))
739 739  
899 +(((
740 740  865.0625 - SF7BW125 to SF12BW125
901 +)))
741 741  
903 +(((
742 742  865.4025 - SF7BW125 to SF12BW125
905 +)))
743 743  
907 +(((
744 744  865.9850 - SF7BW125 to SF12BW125
909 +)))
745 745  
911 +(((
912 +
913 +)))
746 746  
915 +(((
747 747  (% style="color:blue" %)**Downlink:**
917 +)))
748 748  
919 +(((
749 749  Uplink channels 1-3 (RX1)
921 +)))
750 750  
923 +(((
751 751  866.550 - SF10BW125 (RX2)
925 +)))
752 752  
753 753  
754 754  
... ... @@ -759,7 +759,6 @@
759 759  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
760 760  * Blink once when device transmit a packet.
761 761  
762 -
763 763  == 2.10 ​Firmware Change Log ==
764 764  
765 765  
... ... @@ -774,26 +774,51 @@
774 774  
775 775  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
776 776  
950 +(((
777 777  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
952 +)))
778 778  
779 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
780 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
954 +* (((
955 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
956 +)))
957 +* (((
958 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
959 +)))
781 781  
961 +(((
782 782  There are two kinds of commands to configure LSPH01, they are:
963 +)))
783 783  
784 -* (% style="color:#4f81bd" %)** General Commands**.
965 +* (((
966 +(% style="color:#4f81bd" %)** General Commands**.
967 +)))
785 785  
969 +(((
786 786  These commands are to configure:
971 +)))
787 787  
788 -* General system settings like: uplink interval.
789 -* LoRaWAN protocol & radio related command.
973 +* (((
974 +General system settings like: uplink interval.
975 +)))
976 +* (((
977 +LoRaWAN protocol & radio related command.
978 +)))
790 790  
980 +(((
791 791  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
982 +)))
792 792  
984 +(((
985 +
986 +)))
793 793  
794 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
988 +* (((
989 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
990 +)))
795 795  
992 +(((
796 796  These commands only valid for LSPH01, as below:
994 +)))
797 797  
798 798  
799 799  
... ... @@ -806,17 +806,27 @@
806 806  [[image:image-20220607171554-8.png]]
807 807  
808 808  
809 -
1007 +(((
810 810  (% style="color:#037691" %)**Downlink Command: 0x01**
1009 +)))
811 811  
1011 +(((
812 812  Format: Command Code (0x01) followed by 3 bytes time value.
1013 +)))
813 813  
1015 +(((
814 814  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1017 +)))
815 815  
816 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
817 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1019 +* (((
1020 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1021 +)))
1022 +* (((
1023 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
818 818  
819 819  
1026 +
1027 +)))
820 820  
821 821  == 3.2 Set Interrupt Mode ==
822 822  
... ... @@ -824,21 +824,37 @@
824 824  
825 825  (% style="color:#037691" %)**AT Command: AT+INTMOD**
826 826  
827 -[[image:image-20220607171716-9.png]]
1035 +[[image:image-20220610105907-1.png]]
828 828  
829 829  
1038 +(((
830 830  (% style="color:#037691" %)**Downlink Command: 0x06**
1040 +)))
831 831  
1042 +(((
832 832  Format: Command Code (0x06) followed by 3 bytes.
1044 +)))
833 833  
1046 +(((
834 834  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1048 +)))
835 835  
836 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
837 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1050 +* (((
1051 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1052 +)))
1053 +* (((
1054 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1055 +)))
838 838  
1057 +(((
1058 +
1059 +)))
1060 +
1061 +
1062 +
839 839  == 3.3 Calibrate Sensor ==
840 840  
841 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1065 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
842 842  
843 843  
844 844  
... ... @@ -870,14 +870,14 @@
870 870  
871 871  Version
872 872  )))|Sensor Type|Reserve|(((
873 -[[Message Type>>path:#H2.3.6MessageType]]
1097 +[[Message Type>>||anchor="H2.3.6MessageType"]]
874 874  Always 0x02
875 875  )))
876 876  
877 -**Software Type**: Always 0x03 for LSPH01
1101 +(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LSPH01
878 878  
879 879  
880 -**Frequency Band**:
1104 +(% style="color:#037691" %)**Frequency Band**:
881 881  
882 882  *0x01: EU868
883 883  
... ... @@ -900,13 +900,13 @@
900 900  *0xa0: AS923-3
901 901  
902 902  
903 -**Sub-Band**: value 0x00 ~~ 0x08
1127 +(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
904 904  
905 905  
906 -**Firmware Version**: 0x0100, Means: v1.0.0 version
1130 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
907 907  
908 908  
909 -**Sensor Type**:
1133 +(% style="color:#037691" %)**Sensor Type**:
910 910  
911 911  0x01: LSE01
912 912  
... ... @@ -933,7 +933,7 @@
933 933  )))
934 934  
935 935  (((
936 -The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1160 +The discharge curve is not linear so can't simply use percentage to show the battery level. Below is the battery performance.
937 937  )))
938 938  
939 939  [[image:1654593587246-335.png]]
... ... @@ -968,12 +968,12 @@
968 968  )))
969 969  
970 970  
971 -**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
1195 +(% style="color:#037691" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
972 972  
973 973  [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
974 974  
975 975  
976 -**Step 2**: Open it and choose
1200 +(% style="color:#037691" %)**Step 2**(%%): Open it and choose
977 977  
978 978  * Product Model
979 979  * Uplink Interval
... ... @@ -987,13 +987,13 @@
987 987  The battery related documents as below:
988 988  
989 989  * (((
990 -[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
1214 +[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
991 991  )))
992 992  * (((
993 993  [[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
994 994  )))
995 995  * (((
996 -[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
1220 +[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
997 997  )))
998 998  
999 999  [[image:image-20220607172042-11.png]]
... ... @@ -1010,9 +1010,13 @@
1010 1010  
1011 1011  === ​4.3.2 Replace the battery ===
1012 1012  
1013 -You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1237 +(((
1238 +You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
1239 +)))
1014 1014  
1241 +(((
1015 1015  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1243 +)))
1016 1016  
1017 1017  
1018 1018  
... ... @@ -1033,29 +1033,29 @@
1033 1033  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1034 1034  
1035 1035  
1264 +(((
1036 1036  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1266 +)))
1037 1037  
1038 1038  
1039 1039   [[image:1654593712276-618.png]]
1040 1040  
1041 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1271 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1042 1042  
1043 1043  
1044 -
1045 1045  = 6. FAQ =
1046 1046  
1047 1047  == 6.1 How to change the LoRa Frequency Bands/Region ==
1048 1048  
1049 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1278 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1050 1050  When downloading the images, choose the required image file for download. ​
1051 1051  
1052 1052  
1053 -
1054 1054  = 7. Trouble Shooting =
1055 1055  
1056 -== 7.1 AT Commands input doesn’t work ==
1284 +== 7.1 AT Commands input doesn't work ==
1057 1057  
1058 -In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1286 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1059 1059  
1060 1060  
1061 1061  
... ... @@ -1075,6 +1075,10 @@
1075 1075  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1076 1076  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1077 1077  
1306 +
1307 +
1308 +
1309 +
1078 1078  = 9. ​Packing Info =
1079 1079  
1080 1080  
... ... @@ -1089,6 +1089,10 @@
1089 1089  * Package Size / pcs : cm
1090 1090  * Weight / pcs : g
1091 1091  
1324 +
1325 +
1326 +
1327 +
1092 1092  = 10. ​Support =
1093 1093  
1094 1094  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
image-20220610105907-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +15.5 KB
Content