Skip to Content
Last modified by Xiaoling on 2025/04/25 14:08
From version 74.2
edited by Xiaoling
on 2022/06/07 17:47
Change comment: There is no comment for this version
To version 94.1
edited by Xiaoling
on 2022/06/25 17:10
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -4,74 +4,31 @@
4 4  
5 5  
6 6  
7 -**Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 65  
66 66  
12 +**Table of Contents:**
67 67  
14 +{{toc/}}
68 68  
69 69  
17 +
18 +
19 +
20 +
21 +
22 +
23 +
24 +
70 70  = 1. Introduction =
71 71  
72 72  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
73 73  
74 74  (((
30 +
31 +
75 75  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
76 76  )))
77 77  
... ... @@ -96,6 +96,7 @@
96 96  
97 97  
98 98  
56 +
99 99  == ​1.2 Features ==
100 100  
101 101  * LoRaWAN 1.0.3 Class A
... ... @@ -154,7 +154,7 @@
154 154  )))
155 155  
156 156  (((
157 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
115 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
158 158  )))
159 159  
160 160  
... ... @@ -166,10 +166,14 @@
166 166  
167 167  (((
168 168  [[image:1654592492399-921.png]]
127 +
128 +
169 169  )))
170 170  
171 171  (((
172 172  The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
133 +
134 +
173 173  )))
174 174  
175 175  (((
... ... @@ -193,11 +193,13 @@
193 193  [[image:1654592600093-601.png]]
194 194  
195 195  
158 +
196 196  **Add APP EUI and DEV EUI**
197 197  
198 198  [[image:1654592619856-881.png]]
199 199  
200 200  
164 +
201 201  **Add APP EUI in the application**
202 202  
203 203  [[image:1654592632656-512.png]]
... ... @@ -240,19 +240,17 @@
240 240  )))
241 241  
242 242  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
243 -|(((
244 -**Size**
207 +|=(% style="width: 62.5px;" %)(((
208 +**Size (bytes)**
209 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
210 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
211 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
245 245  
246 -**(bytes)**
247 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
248 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
249 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
250 -
251 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
252 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
253 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
213 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
214 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
215 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
254 254  )))|Reserve|(((
255 -[[Message Type>>path:#H2.3.6MessageType]]
217 +[[Message Type>>||anchor="H2.3.6MessageType"]]
256 256  )))
257 257  
258 258  [[image:1654592721645-318.png]]
... ... @@ -308,7 +308,7 @@
308 308  
309 309  === 2.3.5 Interrupt Pin ===
310 310  
311 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
273 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
312 312  
313 313  
314 314  **Example:**
... ... @@ -330,14 +330,13 @@
330 330  )))
331 331  
332 332  
333 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
334 -|=**Message Type Code**|=**Description**|=**Payload**
335 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
336 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
337 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
295 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
296 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
297 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
298 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
299 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
338 338  
339 339  
340 -
341 341  === 2.3.7 Decode payload in The Things Network ===
342 342  
343 343  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -357,7 +357,7 @@
357 357  
358 358  == 2.4 Uplink Interval ==
359 359  
360 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
321 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
361 361  
362 362  
363 363  
... ... @@ -400,9 +400,13 @@
400 400  [[image:1654592856403-259.png]]
401 401  
402 402  
364 +(((
403 403  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
366 +)))
404 404  
368 +(((
405 405  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
370 +)))
406 406  
407 407  
408 408  [[image:1654592878525-845.png]]
... ... @@ -425,8 +425,10 @@
425 425  === 2.6.1 Before measurement ===
426 426  
427 427  (((
393 +(((
428 428  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
429 429  )))
396 +)))
430 430  
431 431  
432 432  
... ... @@ -433,24 +433,45 @@
433 433  === 2.6.2 Measurement ===
434 434  
435 435  
403 +(((
436 436  (% style="color:#4f81bd" %)**Measurement the soil surface:**
405 +)))
437 437  
407 +(((
438 438  [[image:1654592946732-634.png]]
409 +)))
439 439  
411 +(((
440 440  Choose the proper measuring position. Split the surface soil according to the measured deep.
413 +)))
441 441  
415 +(((
442 442  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
417 +)))
443 443  
419 +(((
444 444  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
421 +)))
445 445  
423 +(((
446 446  Put soil over the probe after insert. And start to measure.
425 +)))
447 447  
427 +(((
428 +
429 +)))
448 448  
431 +(((
449 449  (% style="color:#4f81bd" %)**Measurement inside soil:**
433 +)))
450 450  
435 +(((
451 451  Dig a hole with diameter > 20CM.
437 +)))
452 452  
439 +(((
453 453  Insert the probe inside, method like measure the surface.
441 +)))
454 454  
455 455  
456 456  
... ... @@ -480,9 +480,13 @@
480 480  
481 481  == 2.7 Calibration ==
482 482  
471 +(((
483 483  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
473 +)))
484 484  
475 +(((
485 485  After stable, user can use below command to calibrate.
477 +)))
486 486  
487 487  [[image:image-20220607171149-4.png]]
488 488  
... ... @@ -489,12 +489,10 @@
489 489  
490 490  (% style="color:#037691" %)**Calibration Payload**
491 491  
492 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
493 -|(((
494 -**Size**
495 -
496 -**(bytes)**
497 -)))|**1**|**1**|**1**|**7**|**1**
484 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
485 +|=(% style="width: 62.5px;" %)(((
486 +**Size (bytes)**
487 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
498 498  |**Value**|(((
499 499  PH4
500 500  
... ... @@ -504,7 +504,7 @@
504 504  
505 505  Calibrate value
506 506  )))|Reserve|(((
507 -[[Message Type>>path:#H2.3.6MessageType]]
497 +[[Message Type>>||anchor="H2.3.6MessageType"]]
508 508  
509 509  Always 0x03
510 510  )))
... ... @@ -519,6 +519,7 @@
519 519  
520 520  
521 521  
512 +
522 522  == 2.8 Frequency Plans ==
523 523  
524 524  (((
... ... @@ -528,32 +528,61 @@
528 528  
529 529  === 2.8.1 EU863-870 (EU868) ===
530 530  
522 +(((
531 531  (% style="color:blue" %)**Uplink:**
524 +)))
532 532  
526 +(((
533 533  868.1 - SF7BW125 to SF12BW125
528 +)))
534 534  
530 +(((
535 535  868.3 - SF7BW125 to SF12BW125 and SF7BW250
532 +)))
536 536  
534 +(((
537 537  868.5 - SF7BW125 to SF12BW125
536 +)))
538 538  
538 +(((
539 539  867.1 - SF7BW125 to SF12BW125
540 +)))
540 540  
542 +(((
541 541  867.3 - SF7BW125 to SF12BW125
544 +)))
542 542  
546 +(((
543 543  867.5 - SF7BW125 to SF12BW125
548 +)))
544 544  
550 +(((
545 545  867.7 - SF7BW125 to SF12BW125
552 +)))
546 546  
554 +(((
547 547  867.9 - SF7BW125 to SF12BW125
556 +)))
548 548  
558 +(((
549 549  868.8 - FSK
560 +)))
550 550  
562 +(((
563 +
564 +)))
551 551  
566 +(((
552 552  (% style="color:blue" %)**Downlink:**
568 +)))
553 553  
570 +(((
554 554  Uplink channels 1-9 (RX1)
572 +)))
555 555  
574 +(((
556 556  869.525 - SF9BW125 (RX2 downlink only)
576 +)))
557 557  
558 558  
559 559  
... ... @@ -574,48 +574,92 @@
574 574  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
575 575  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
576 576  
597 +
577 577  === 2.8.3 CN470-510 (CN470) ===
578 578  
600 +(((
579 579  Used in China, Default use CHE=1
602 +)))
580 580  
604 +(((
581 581  (% style="color:blue" %)**Uplink:**
606 +)))
582 582  
608 +(((
583 583  486.3 - SF7BW125 to SF12BW125
610 +)))
584 584  
612 +(((
585 585  486.5 - SF7BW125 to SF12BW125
614 +)))
586 586  
616 +(((
587 587  486.7 - SF7BW125 to SF12BW125
618 +)))
588 588  
620 +(((
589 589  486.9 - SF7BW125 to SF12BW125
622 +)))
590 590  
624 +(((
591 591  487.1 - SF7BW125 to SF12BW125
626 +)))
592 592  
628 +(((
593 593  487.3 - SF7BW125 to SF12BW125
630 +)))
594 594  
632 +(((
595 595  487.5 - SF7BW125 to SF12BW125
634 +)))
596 596  
636 +(((
597 597  487.7 - SF7BW125 to SF12BW125
638 +)))
598 598  
640 +(((
641 +
642 +)))
599 599  
644 +(((
600 600  (% style="color:blue" %)**Downlink:**
646 +)))
601 601  
648 +(((
602 602  506.7 - SF7BW125 to SF12BW125
650 +)))
603 603  
652 +(((
604 604  506.9 - SF7BW125 to SF12BW125
654 +)))
605 605  
656 +(((
606 606  507.1 - SF7BW125 to SF12BW125
658 +)))
607 607  
660 +(((
608 608  507.3 - SF7BW125 to SF12BW125
662 +)))
609 609  
664 +(((
610 610  507.5 - SF7BW125 to SF12BW125
666 +)))
611 611  
668 +(((
612 612  507.7 - SF7BW125 to SF12BW125
670 +)))
613 613  
672 +(((
614 614  507.9 - SF7BW125 to SF12BW125
674 +)))
615 615  
676 +(((
616 616  508.1 - SF7BW125 to SF12BW125
678 +)))
617 617  
680 +(((
618 618  505.3 - SF12BW125 (RX2 downlink only)
682 +)))
619 619  
620 620  
621 621  
... ... @@ -643,108 +643,217 @@
643 643  
644 644  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
645 645  
710 +(((
646 646  (% style="color:blue" %)**Default Uplink channel:**
712 +)))
647 647  
714 +(((
648 648  923.2 - SF7BW125 to SF10BW125
716 +)))
649 649  
718 +(((
650 650  923.4 - SF7BW125 to SF10BW125
720 +)))
651 651  
722 +(((
723 +
724 +)))
652 652  
726 +(((
653 653  (% style="color:blue" %)**Additional Uplink Channel**:
728 +)))
654 654  
730 +(((
655 655  (OTAA mode, channel added by JoinAccept message)
732 +)))
656 656  
734 +(((
735 +
736 +)))
657 657  
738 +(((
658 658  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
740 +)))
659 659  
742 +(((
660 660  922.2 - SF7BW125 to SF10BW125
744 +)))
661 661  
746 +(((
662 662  922.4 - SF7BW125 to SF10BW125
748 +)))
663 663  
750 +(((
664 664  922.6 - SF7BW125 to SF10BW125
752 +)))
665 665  
754 +(((
666 666  922.8 - SF7BW125 to SF10BW125
756 +)))
667 667  
758 +(((
668 668  923.0 - SF7BW125 to SF10BW125
760 +)))
669 669  
762 +(((
670 670  922.0 - SF7BW125 to SF10BW125
764 +)))
671 671  
766 +(((
767 +
768 +)))
672 672  
770 +(((
673 673  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
772 +)))
674 674  
774 +(((
675 675  923.6 - SF7BW125 to SF10BW125
776 +)))
676 676  
778 +(((
677 677  923.8 - SF7BW125 to SF10BW125
780 +)))
678 678  
782 +(((
679 679  924.0 - SF7BW125 to SF10BW125
784 +)))
680 680  
786 +(((
681 681  924.2 - SF7BW125 to SF10BW125
788 +)))
682 682  
790 +(((
683 683  924.4 - SF7BW125 to SF10BW125
792 +)))
684 684  
794 +(((
685 685  924.6 - SF7BW125 to SF10BW125
796 +)))
686 686  
798 +(((
799 +
800 +)))
687 687  
802 +(((
688 688  (% style="color:blue" %)**Downlink:**
804 +)))
689 689  
806 +(((
690 690  Uplink channels 1-8 (RX1)
808 +)))
691 691  
810 +(((
692 692  923.2 - SF10BW125 (RX2)
812 +)))
693 693  
694 694  
695 695  
696 696  === 2.8.6 KR920-923 (KR920) ===
697 697  
818 +(((
698 698  (% style="color:blue" %)**Default channel:**
820 +)))
699 699  
822 +(((
700 700  922.1 - SF7BW125 to SF12BW125
824 +)))
701 701  
826 +(((
702 702  922.3 - SF7BW125 to SF12BW125
828 +)))
703 703  
830 +(((
704 704  922.5 - SF7BW125 to SF12BW125
832 +)))
705 705  
834 +(((
835 +
836 +)))
706 706  
838 +(((
707 707  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
840 +)))
708 708  
842 +(((
709 709  922.1 - SF7BW125 to SF12BW125
844 +)))
710 710  
846 +(((
711 711  922.3 - SF7BW125 to SF12BW125
848 +)))
712 712  
850 +(((
713 713  922.5 - SF7BW125 to SF12BW125
852 +)))
714 714  
854 +(((
715 715  922.7 - SF7BW125 to SF12BW125
856 +)))
716 716  
858 +(((
717 717  922.9 - SF7BW125 to SF12BW125
860 +)))
718 718  
862 +(((
719 719  923.1 - SF7BW125 to SF12BW125
864 +)))
720 720  
866 +(((
721 721  923.3 - SF7BW125 to SF12BW125
868 +)))
722 722  
870 +(((
871 +
872 +)))
723 723  
874 +(((
724 724  (% style="color:blue" %)**Downlink:**
876 +)))
725 725  
878 +(((
726 726  Uplink channels 1-7(RX1)
880 +)))
727 727  
882 +(((
728 728  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
884 +)))
729 729  
730 730  
731 731  
732 732  === 2.8.7 IN865-867 (IN865) ===
733 733  
890 +(((
734 734  (% style="color:blue" %)**Uplink:**
892 +)))
735 735  
894 +(((
736 736  865.0625 - SF7BW125 to SF12BW125
896 +)))
737 737  
898 +(((
738 738  865.4025 - SF7BW125 to SF12BW125
900 +)))
739 739  
902 +(((
740 740  865.9850 - SF7BW125 to SF12BW125
904 +)))
741 741  
906 +(((
907 +
908 +)))
742 742  
910 +(((
743 743  (% style="color:blue" %)**Downlink:**
912 +)))
744 744  
914 +(((
745 745  Uplink channels 1-3 (RX1)
916 +)))
746 746  
918 +(((
747 747  866.550 - SF10BW125 (RX2)
920 +)))
748 748  
749 749  
750 750  
... ... @@ -770,26 +770,51 @@
770 770  
771 771  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
772 772  
946 +(((
773 773  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
948 +)))
774 774  
775 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
776 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
950 +* (((
951 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
952 +)))
953 +* (((
954 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
955 +)))
777 777  
957 +(((
778 778  There are two kinds of commands to configure LSPH01, they are:
959 +)))
779 779  
780 -* (% style="color:#4f81bd" %)** General Commands**.
961 +* (((
962 +(% style="color:#4f81bd" %)** General Commands**.
963 +)))
781 781  
965 +(((
782 782  These commands are to configure:
967 +)))
783 783  
784 -* General system settings like: uplink interval.
785 -* LoRaWAN protocol & radio related command.
969 +* (((
970 +General system settings like: uplink interval.
971 +)))
972 +* (((
973 +LoRaWAN protocol & radio related command.
974 +)))
786 786  
976 +(((
787 787  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
978 +)))
788 788  
980 +(((
981 +
982 +)))
789 789  
790 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
984 +* (((
985 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
986 +)))
791 791  
988 +(((
792 792  These commands only valid for LSPH01, as below:
990 +)))
793 793  
794 794  
795 795  
... ... @@ -802,17 +802,27 @@
802 802  [[image:image-20220607171554-8.png]]
803 803  
804 804  
805 -
1003 +(((
806 806  (% style="color:#037691" %)**Downlink Command: 0x01**
1005 +)))
807 807  
1007 +(((
808 808  Format: Command Code (0x01) followed by 3 bytes time value.
1009 +)))
809 809  
1011 +(((
810 810  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1013 +)))
811 811  
812 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
813 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1015 +* (((
1016 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1017 +)))
1018 +* (((
1019 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
814 814  
815 815  
1022 +
1023 +)))
816 816  
817 817  == 3.2 Set Interrupt Mode ==
818 818  
... ... @@ -820,21 +820,37 @@
820 820  
821 821  (% style="color:#037691" %)**AT Command: AT+INTMOD**
822 822  
823 -[[image:image-20220607171716-9.png]]
1031 +[[image:image-20220610105907-1.png]]
824 824  
825 825  
1034 +(((
826 826  (% style="color:#037691" %)**Downlink Command: 0x06**
1036 +)))
827 827  
1038 +(((
828 828  Format: Command Code (0x06) followed by 3 bytes.
1040 +)))
829 829  
1042 +(((
830 830  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1044 +)))
831 831  
832 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
833 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1046 +* (((
1047 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1048 +)))
1049 +* (((
1050 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1051 +)))
834 834  
1053 +(((
1054 +
1055 +)))
1056 +
1057 +
1058 +
835 835  == 3.3 Calibrate Sensor ==
836 836  
837 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1061 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
838 838  
839 839  
840 840  
... ... @@ -866,14 +866,14 @@
866 866  
867 867  Version
868 868  )))|Sensor Type|Reserve|(((
869 -[[Message Type>>path:#H2.3.6MessageType]]
1093 +[[Message Type>>||anchor="H2.3.6MessageType"]]
870 870  Always 0x02
871 871  )))
872 872  
873 -**Software Type**: Always 0x03 for LSPH01
1097 +(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LSPH01
874 874  
875 875  
876 -**Frequency Band**:
1100 +(% style="color:#037691" %)**Frequency Band**:
877 877  
878 878  *0x01: EU868
879 879  
... ... @@ -896,13 +896,13 @@
896 896  *0xa0: AS923-3
897 897  
898 898  
899 -**Sub-Band**: value 0x00 ~~ 0x08
1123 +(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
900 900  
901 901  
902 -**Firmware Version**: 0x0100, Means: v1.0.0 version
1126 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
903 903  
904 904  
905 -**Sensor Type**:
1129 +(% style="color:#037691" %)**Sensor Type**:
906 906  
907 907  0x01: LSE01
908 908  
... ... @@ -929,7 +929,7 @@
929 929  )))
930 930  
931 931  (((
932 -The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1156 +The discharge curve is not linear so can't simply use percentage to show the battery level. Below is the battery performance.
933 933  )))
934 934  
935 935  [[image:1654593587246-335.png]]
... ... @@ -964,12 +964,12 @@
964 964  )))
965 965  
966 966  
967 -**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
1191 +(% style="color:#037691" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
968 968  
969 969  [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
970 970  
971 971  
972 -**Step 2**: Open it and choose
1196 +(% style="color:#037691" %)**Step 2**(%%): Open it and choose
973 973  
974 974  * Product Model
975 975  * Uplink Interval
... ... @@ -983,13 +983,13 @@
983 983  The battery related documents as below:
984 984  
985 985  * (((
986 -[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
1210 +[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
987 987  )))
988 988  * (((
989 989  [[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
990 990  )))
991 991  * (((
992 -[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
1216 +[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
993 993  )))
994 994  
995 995  [[image:image-20220607172042-11.png]]
... ... @@ -1006,9 +1006,13 @@
1006 1006  
1007 1007  === ​4.3.2 Replace the battery ===
1008 1008  
1009 -You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1233 +(((
1234 +You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
1235 +)))
1010 1010  
1237 +(((
1011 1011  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1239 +)))
1012 1012  
1013 1013  
1014 1014  
... ... @@ -1029,29 +1029,29 @@
1029 1029  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1030 1030  
1031 1031  
1260 +(((
1032 1032  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1262 +)))
1033 1033  
1034 1034  
1035 1035   [[image:1654593712276-618.png]]
1036 1036  
1037 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1267 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1038 1038  
1039 1039  
1040 -
1041 1041  = 6. FAQ =
1042 1042  
1043 1043  == 6.1 How to change the LoRa Frequency Bands/Region ==
1044 1044  
1045 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1274 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1046 1046  When downloading the images, choose the required image file for download. ​
1047 1047  
1048 1048  
1049 -
1050 1050  = 7. Trouble Shooting =
1051 1051  
1052 -== 7.1 AT Commands input doesn’t work ==
1280 +== 7.1 AT Commands input doesn't work ==
1053 1053  
1054 -In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1282 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1055 1055  
1056 1056  
1057 1057  
... ... @@ -1071,6 +1071,11 @@
1071 1071  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1072 1072  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1073 1073  
1302 +
1303 +
1304 +
1305 +
1306 +
1074 1074  = 9. ​Packing Info =
1075 1075  
1076 1076  
... ... @@ -1085,6 +1085,11 @@
1085 1085  * Package Size / pcs : cm
1086 1086  * Weight / pcs : g
1087 1087  
1321 +
1322 +
1323 +
1324 +
1325 +
1088 1088  = 10. ​Support =
1089 1089  
1090 1090  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
image-20220610105907-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +15.5 KB
Content