Skip to Content
Last modified by Xiaoling on 2025/04/25 14:08
From version 74.1
edited by Xiaoling
on 2022/06/07 17:42
Change comment: There is no comment for this version
To version 93.1
edited by Xiaoling
on 2022/06/25 17:05
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -4,75 +4,31 @@
4 4  
5 5  
6 6  
7 -**Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 65  
66 66  
12 +**Table of Contents:**
67 67  
14 +{{toc/}}
68 68  
69 69  
70 70  
18 +
19 +
20 +
21 +
22 +
23 +
24 +
71 71  = 1. Introduction =
72 72  
73 73  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
74 74  
75 75  (((
30 +
31 +
76 76  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
77 77  )))
78 78  
... ... @@ -97,6 +97,7 @@
97 97  
98 98  
99 99  
56 +
100 100  == ​1.2 Features ==
101 101  
102 102  * LoRaWAN 1.0.3 Class A
... ... @@ -158,7 +158,7 @@
158 158  )))
159 159  
160 160  (((
161 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
118 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
162 162  )))
163 163  
164 164  
... ... @@ -170,10 +170,14 @@
170 170  
171 171  (((
172 172  [[image:1654592492399-921.png]]
130 +
131 +
173 173  )))
174 174  
175 175  (((
176 176  The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
136 +
137 +
177 177  )))
178 178  
179 179  (((
... ... @@ -197,11 +197,13 @@
197 197  [[image:1654592600093-601.png]]
198 198  
199 199  
161 +
200 200  **Add APP EUI and DEV EUI**
201 201  
202 202  [[image:1654592619856-881.png]]
203 203  
204 204  
167 +
205 205  **Add APP EUI in the application**
206 206  
207 207  [[image:1654592632656-512.png]]
... ... @@ -244,19 +244,17 @@
244 244  )))
245 245  
246 246  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
247 -|(((
248 -**Size**
210 +|=(% style="width: 62.5px;" %)(((
211 +**Size (bytes)**
212 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
213 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
214 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
249 249  
250 -**(bytes)**
251 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
252 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
253 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
254 -
255 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
256 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
257 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
216 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
217 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
218 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
258 258  )))|Reserve|(((
259 -[[Message Type>>path:#H2.3.6MessageType]]
220 +[[Message Type>>||anchor="H2.3.6MessageType"]]
260 260  )))
261 261  
262 262  [[image:1654592721645-318.png]]
... ... @@ -312,7 +312,7 @@
312 312  
313 313  === 2.3.5 Interrupt Pin ===
314 314  
315 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
276 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
316 316  
317 317  
318 318  **Example:**
... ... @@ -334,15 +334,14 @@
334 334  )))
335 335  
336 336  
337 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
338 -|=**Message Type Code**|=**Description**|=**Payload**
339 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
340 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
341 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
298 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
299 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
300 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
301 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
302 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
342 342  
343 343  
344 344  
345 -
346 346  === 2.3.7 Decode payload in The Things Network ===
347 347  
348 348  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -362,18 +362,27 @@
362 362  
363 363  == 2.4 Uplink Interval ==
364 364  
365 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
325 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
366 366  
367 367  
368 368  
369 369  == 2.5 ​Show Data in DataCake IoT Server ==
370 370  
331 +(((
371 371  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
333 +)))
372 372  
335 +(((
336 +
337 +)))
373 373  
339 +(((
374 374  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
341 +)))
375 375  
343 +(((
376 376  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
345 +)))
377 377  
378 378  
379 379  [[image:1654592790040-760.png]]
... ... @@ -396,9 +396,13 @@
396 396  [[image:1654592856403-259.png]]
397 397  
398 398  
368 +(((
399 399  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
370 +)))
400 400  
372 +(((
401 401  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
374 +)))
402 402  
403 403  
404 404  [[image:1654592878525-845.png]]
... ... @@ -421,8 +421,10 @@
421 421  === 2.6.1 Before measurement ===
422 422  
423 423  (((
397 +(((
424 424  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
425 425  )))
400 +)))
426 426  
427 427  
428 428  
... ... @@ -429,24 +429,45 @@
429 429  === 2.6.2 Measurement ===
430 430  
431 431  
407 +(((
432 432  (% style="color:#4f81bd" %)**Measurement the soil surface:**
409 +)))
433 433  
411 +(((
434 434  [[image:1654592946732-634.png]]
413 +)))
435 435  
415 +(((
436 436  Choose the proper measuring position. Split the surface soil according to the measured deep.
417 +)))
437 437  
419 +(((
438 438  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
421 +)))
439 439  
423 +(((
440 440  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
425 +)))
441 441  
427 +(((
442 442  Put soil over the probe after insert. And start to measure.
429 +)))
443 443  
431 +(((
432 +
433 +)))
444 444  
435 +(((
445 445  (% style="color:#4f81bd" %)**Measurement inside soil:**
437 +)))
446 446  
439 +(((
447 447  Dig a hole with diameter > 20CM.
441 +)))
448 448  
443 +(((
449 449  Insert the probe inside, method like measure the surface.
445 +)))
450 450  
451 451  
452 452  
... ... @@ -476,9 +476,13 @@
476 476  
477 477  == 2.7 Calibration ==
478 478  
475 +(((
479 479  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
477 +)))
480 480  
479 +(((
481 481  After stable, user can use below command to calibrate.
481 +)))
482 482  
483 483  [[image:image-20220607171149-4.png]]
484 484  
... ... @@ -485,12 +485,10 @@
485 485  
486 486  (% style="color:#037691" %)**Calibration Payload**
487 487  
488 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
489 -|(((
490 -**Size**
491 -
492 -**(bytes)**
493 -)))|**1**|**1**|**1**|**7**|**1**
488 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
489 +|=(% style="width: 62.5px;" %)(((
490 +**Size (bytes)**
491 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
494 494  |**Value**|(((
495 495  PH4
496 496  
... ... @@ -500,7 +500,7 @@
500 500  
501 501  Calibrate value
502 502  )))|Reserve|(((
503 -[[Message Type>>path:#H2.3.6MessageType]]
501 +[[Message Type>>||anchor="H2.3.6MessageType"]]
504 504  
505 505  Always 0x03
506 506  )))
... ... @@ -516,6 +516,7 @@
516 516  
517 517  
518 518  
517 +
519 519  == 2.8 Frequency Plans ==
520 520  
521 521  (((
... ... @@ -525,32 +525,61 @@
525 525  
526 526  === 2.8.1 EU863-870 (EU868) ===
527 527  
527 +(((
528 528  (% style="color:blue" %)**Uplink:**
529 +)))
529 529  
531 +(((
530 530  868.1 - SF7BW125 to SF12BW125
533 +)))
531 531  
535 +(((
532 532  868.3 - SF7BW125 to SF12BW125 and SF7BW250
537 +)))
533 533  
539 +(((
534 534  868.5 - SF7BW125 to SF12BW125
541 +)))
535 535  
543 +(((
536 536  867.1 - SF7BW125 to SF12BW125
545 +)))
537 537  
547 +(((
538 538  867.3 - SF7BW125 to SF12BW125
549 +)))
539 539  
551 +(((
540 540  867.5 - SF7BW125 to SF12BW125
553 +)))
541 541  
555 +(((
542 542  867.7 - SF7BW125 to SF12BW125
557 +)))
543 543  
559 +(((
544 544  867.9 - SF7BW125 to SF12BW125
561 +)))
545 545  
563 +(((
546 546  868.8 - FSK
565 +)))
547 547  
567 +(((
568 +
569 +)))
548 548  
571 +(((
549 549  (% style="color:blue" %)**Downlink:**
573 +)))
550 550  
575 +(((
551 551  Uplink channels 1-9 (RX1)
577 +)))
552 552  
579 +(((
553 553  869.525 - SF9BW125 (RX2 downlink only)
581 +)))
554 554  
555 555  
556 556  
... ... @@ -572,48 +572,92 @@
572 572  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
573 573  
574 574  
603 +
575 575  === 2.8.3 CN470-510 (CN470) ===
576 576  
606 +(((
577 577  Used in China, Default use CHE=1
608 +)))
578 578  
610 +(((
579 579  (% style="color:blue" %)**Uplink:**
612 +)))
580 580  
614 +(((
581 581  486.3 - SF7BW125 to SF12BW125
616 +)))
582 582  
618 +(((
583 583  486.5 - SF7BW125 to SF12BW125
620 +)))
584 584  
622 +(((
585 585  486.7 - SF7BW125 to SF12BW125
624 +)))
586 586  
626 +(((
587 587  486.9 - SF7BW125 to SF12BW125
628 +)))
588 588  
630 +(((
589 589  487.1 - SF7BW125 to SF12BW125
632 +)))
590 590  
634 +(((
591 591  487.3 - SF7BW125 to SF12BW125
636 +)))
592 592  
638 +(((
593 593  487.5 - SF7BW125 to SF12BW125
640 +)))
594 594  
642 +(((
595 595  487.7 - SF7BW125 to SF12BW125
644 +)))
596 596  
646 +(((
647 +
648 +)))
597 597  
650 +(((
598 598  (% style="color:blue" %)**Downlink:**
652 +)))
599 599  
654 +(((
600 600  506.7 - SF7BW125 to SF12BW125
656 +)))
601 601  
658 +(((
602 602  506.9 - SF7BW125 to SF12BW125
660 +)))
603 603  
662 +(((
604 604  507.1 - SF7BW125 to SF12BW125
664 +)))
605 605  
666 +(((
606 606  507.3 - SF7BW125 to SF12BW125
668 +)))
607 607  
670 +(((
608 608  507.5 - SF7BW125 to SF12BW125
672 +)))
609 609  
674 +(((
610 610  507.7 - SF7BW125 to SF12BW125
676 +)))
611 611  
678 +(((
612 612  507.9 - SF7BW125 to SF12BW125
680 +)))
613 613  
682 +(((
614 614  508.1 - SF7BW125 to SF12BW125
684 +)))
615 615  
686 +(((
616 616  505.3 - SF12BW125 (RX2 downlink only)
688 +)))
617 617  
618 618  
619 619  
... ... @@ -642,108 +642,217 @@
642 642  
643 643  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
644 644  
717 +(((
645 645  (% style="color:blue" %)**Default Uplink channel:**
719 +)))
646 646  
721 +(((
647 647  923.2 - SF7BW125 to SF10BW125
723 +)))
648 648  
725 +(((
649 649  923.4 - SF7BW125 to SF10BW125
727 +)))
650 650  
729 +(((
730 +
731 +)))
651 651  
733 +(((
652 652  (% style="color:blue" %)**Additional Uplink Channel**:
735 +)))
653 653  
737 +(((
654 654  (OTAA mode, channel added by JoinAccept message)
739 +)))
655 655  
741 +(((
742 +
743 +)))
656 656  
745 +(((
657 657  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
747 +)))
658 658  
749 +(((
659 659  922.2 - SF7BW125 to SF10BW125
751 +)))
660 660  
753 +(((
661 661  922.4 - SF7BW125 to SF10BW125
755 +)))
662 662  
757 +(((
663 663  922.6 - SF7BW125 to SF10BW125
759 +)))
664 664  
761 +(((
665 665  922.8 - SF7BW125 to SF10BW125
763 +)))
666 666  
765 +(((
667 667  923.0 - SF7BW125 to SF10BW125
767 +)))
668 668  
769 +(((
669 669  922.0 - SF7BW125 to SF10BW125
771 +)))
670 670  
773 +(((
774 +
775 +)))
671 671  
777 +(((
672 672  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
779 +)))
673 673  
781 +(((
674 674  923.6 - SF7BW125 to SF10BW125
783 +)))
675 675  
785 +(((
676 676  923.8 - SF7BW125 to SF10BW125
787 +)))
677 677  
789 +(((
678 678  924.0 - SF7BW125 to SF10BW125
791 +)))
679 679  
793 +(((
680 680  924.2 - SF7BW125 to SF10BW125
795 +)))
681 681  
797 +(((
682 682  924.4 - SF7BW125 to SF10BW125
799 +)))
683 683  
801 +(((
684 684  924.6 - SF7BW125 to SF10BW125
803 +)))
685 685  
805 +(((
806 +
807 +)))
686 686  
809 +(((
687 687  (% style="color:blue" %)**Downlink:**
811 +)))
688 688  
813 +(((
689 689  Uplink channels 1-8 (RX1)
815 +)))
690 690  
817 +(((
691 691  923.2 - SF10BW125 (RX2)
819 +)))
692 692  
693 693  
694 694  
695 695  === 2.8.6 KR920-923 (KR920) ===
696 696  
825 +(((
697 697  (% style="color:blue" %)**Default channel:**
827 +)))
698 698  
829 +(((
699 699  922.1 - SF7BW125 to SF12BW125
831 +)))
700 700  
833 +(((
701 701  922.3 - SF7BW125 to SF12BW125
835 +)))
702 702  
837 +(((
703 703  922.5 - SF7BW125 to SF12BW125
839 +)))
704 704  
841 +(((
842 +
843 +)))
705 705  
845 +(((
706 706  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
847 +)))
707 707  
849 +(((
708 708  922.1 - SF7BW125 to SF12BW125
851 +)))
709 709  
853 +(((
710 710  922.3 - SF7BW125 to SF12BW125
855 +)))
711 711  
857 +(((
712 712  922.5 - SF7BW125 to SF12BW125
859 +)))
713 713  
861 +(((
714 714  922.7 - SF7BW125 to SF12BW125
863 +)))
715 715  
865 +(((
716 716  922.9 - SF7BW125 to SF12BW125
867 +)))
717 717  
869 +(((
718 718  923.1 - SF7BW125 to SF12BW125
871 +)))
719 719  
873 +(((
720 720  923.3 - SF7BW125 to SF12BW125
875 +)))
721 721  
877 +(((
878 +
879 +)))
722 722  
881 +(((
723 723  (% style="color:blue" %)**Downlink:**
883 +)))
724 724  
885 +(((
725 725  Uplink channels 1-7(RX1)
887 +)))
726 726  
889 +(((
727 727  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
891 +)))
728 728  
729 729  
730 730  
731 731  === 2.8.7 IN865-867 (IN865) ===
732 732  
897 +(((
733 733  (% style="color:blue" %)**Uplink:**
899 +)))
734 734  
901 +(((
735 735  865.0625 - SF7BW125 to SF12BW125
903 +)))
736 736  
905 +(((
737 737  865.4025 - SF7BW125 to SF12BW125
907 +)))
738 738  
909 +(((
739 739  865.9850 - SF7BW125 to SF12BW125
911 +)))
740 740  
913 +(((
914 +
915 +)))
741 741  
917 +(((
742 742  (% style="color:blue" %)**Downlink:**
919 +)))
743 743  
921 +(((
744 744  Uplink channels 1-3 (RX1)
923 +)))
745 745  
925 +(((
746 746  866.550 - SF10BW125 (RX2)
927 +)))
747 747  
748 748  
749 749  
... ... @@ -770,26 +770,51 @@
770 770  
771 771  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
772 772  
954 +(((
773 773  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
956 +)))
774 774  
775 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
776 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
958 +* (((
959 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
960 +)))
961 +* (((
962 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
963 +)))
777 777  
965 +(((
778 778  There are two kinds of commands to configure LSPH01, they are:
967 +)))
779 779  
780 -* (% style="color:#4f81bd" %)** General Commands**.
969 +* (((
970 +(% style="color:#4f81bd" %)** General Commands**.
971 +)))
781 781  
973 +(((
782 782  These commands are to configure:
975 +)))
783 783  
784 -* General system settings like: uplink interval.
785 -* LoRaWAN protocol & radio related command.
977 +* (((
978 +General system settings like: uplink interval.
979 +)))
980 +* (((
981 +LoRaWAN protocol & radio related command.
982 +)))
786 786  
984 +(((
787 787  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
986 +)))
788 788  
988 +(((
989 +
990 +)))
789 789  
790 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
992 +* (((
993 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
994 +)))
791 791  
996 +(((
792 792  These commands only valid for LSPH01, as below:
998 +)))
793 793  
794 794  
795 795  
... ... @@ -802,19 +802,28 @@
802 802  [[image:image-20220607171554-8.png]]
803 803  
804 804  
805 -
1011 +(((
806 806  (% style="color:#037691" %)**Downlink Command: 0x01**
1013 +)))
807 807  
1015 +(((
808 808  Format: Command Code (0x01) followed by 3 bytes time value.
1017 +)))
809 809  
1019 +(((
810 810  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1021 +)))
811 811  
812 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
813 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1023 +* (((
1024 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1025 +)))
1026 +* (((
1027 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
814 814  
815 815  
1030 +
1031 +)))
816 816  
817 -
818 818  == 3.2 Set Interrupt Mode ==
819 819  
820 820  Feature, Set Interrupt mode for GPIO_EXIT.
... ... @@ -821,22 +821,37 @@
821 821  
822 822  (% style="color:#037691" %)**AT Command: AT+INTMOD**
823 823  
824 -[[image:image-20220607171716-9.png]]
1039 +[[image:image-20220610105907-1.png]]
825 825  
826 826  
1042 +(((
827 827  (% style="color:#037691" %)**Downlink Command: 0x06**
1044 +)))
828 828  
1046 +(((
829 829  Format: Command Code (0x06) followed by 3 bytes.
1048 +)))
830 830  
1050 +(((
831 831  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1052 +)))
832 832  
833 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
834 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1054 +* (((
1055 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1056 +)))
1057 +* (((
1058 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1059 +)))
835 835  
1061 +(((
1062 +
1063 +)))
836 836  
1065 +
1066 +
837 837  == 3.3 Calibrate Sensor ==
838 838  
839 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1069 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
840 840  
841 841  
842 842  
... ... @@ -851,7 +851,6 @@
851 851  * Reply to the confirmation package: 26 01
852 852  * Reply to non-confirmed packet: 26 00
853 853  
854 -
855 855  Device will send an uplink after got this downlink command. With below payload:
856 856  
857 857  Configures info payload:
... ... @@ -869,14 +869,14 @@
869 869  
870 870  Version
871 871  )))|Sensor Type|Reserve|(((
872 -[[Message Type>>path:#H2.3.6MessageType]]
1101 +[[Message Type>>||anchor="H2.3.6MessageType"]]
873 873  Always 0x02
874 874  )))
875 875  
876 -**Software Type**: Always 0x03 for LSPH01
1105 +(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LSPH01
877 877  
878 878  
879 -**Frequency Band**:
1108 +(% style="color:#037691" %)**Frequency Band**:
880 880  
881 881  *0x01: EU868
882 882  
... ... @@ -899,13 +899,13 @@
899 899  *0xa0: AS923-3
900 900  
901 901  
902 -**Sub-Band**: value 0x00 ~~ 0x08
1131 +(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
903 903  
904 904  
905 -**Firmware Version**: 0x0100, Means: v1.0.0 version
1134 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
906 906  
907 907  
908 -**Sensor Type**:
1137 +(% style="color:#037691" %)**Sensor Type**:
909 909  
910 910  0x01: LSE01
911 911  
... ... @@ -932,7 +932,7 @@
932 932  )))
933 933  
934 934  (((
935 -The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1164 +The discharge curve is not linear so can't simply use percentage to show the battery level. Below is the battery performance.
936 936  )))
937 937  
938 938  [[image:1654593587246-335.png]]
... ... @@ -967,12 +967,12 @@
967 967  )))
968 968  
969 969  
970 -**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
1199 +(% style="color:#037691" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
971 971  
972 972  [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
973 973  
974 974  
975 -**Step 2**: Open it and choose
1204 +(% style="color:#037691" %)**Step 2**(%%): Open it and choose
976 976  
977 977  * Product Model
978 978  * Uplink Interval
... ... @@ -986,13 +986,13 @@
986 986  The battery related documents as below:
987 987  
988 988  * (((
989 -[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
1218 +[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
990 990  )))
991 991  * (((
992 992  [[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
993 993  )))
994 994  * (((
995 -[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
1224 +[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
996 996  )))
997 997  
998 998  [[image:image-20220607172042-11.png]]
... ... @@ -1009,9 +1009,13 @@
1009 1009  
1010 1010  === ​4.3.2 Replace the battery ===
1011 1011  
1012 -You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1241 +(((
1242 +You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
1243 +)))
1013 1013  
1245 +(((
1014 1014  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1247 +)))
1015 1015  
1016 1016  
1017 1017  
... ... @@ -1032,29 +1032,29 @@
1032 1032  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1033 1033  
1034 1034  
1268 +(((
1035 1035  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1270 +)))
1036 1036  
1037 1037  
1038 1038   [[image:1654593712276-618.png]]
1039 1039  
1040 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1275 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1041 1041  
1042 1042  
1043 -
1044 1044  = 6. FAQ =
1045 1045  
1046 1046  == 6.1 How to change the LoRa Frequency Bands/Region ==
1047 1047  
1048 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1282 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1049 1049  When downloading the images, choose the required image file for download. ​
1050 1050  
1051 1051  
1052 -
1053 1053  = 7. Trouble Shooting =
1054 1054  
1055 -== 7.1 AT Commands input doesn’t work ==
1288 +== 7.1 AT Commands input doesn't work ==
1056 1056  
1057 -In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1290 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1058 1058  
1059 1059  
1060 1060  
... ... @@ -1074,7 +1074,6 @@
1074 1074  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1075 1075  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1076 1076  
1077 -
1078 1078  = 9. ​Packing Info =
1079 1079  
1080 1080  
... ... @@ -1089,7 +1089,6 @@
1089 1089  * Package Size / pcs : cm
1090 1090  * Weight / pcs : g
1091 1091  
1092 -
1093 1093  = 10. ​Support =
1094 1094  
1095 1095  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
image-20220610105907-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +15.5 KB
Content