Changes for page LSPH01 -- LoRaWAN Soil pH Sensor User Manual

Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 1 added, 0 removed)
  • image-20220610105907-1.png

Details

Page properties

Content

...	...	@@ -4,7 +4,7 @@
4	4
5	5
6	6
7		-**Contents:**
	7	+**Table of Contents:**
8	8
9	9	* [[1. Introduction>>path:#H1.Introduction]]
10	10	** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
...	...	@@ -62,17 +62,13 @@
62	62	* [[10. ​Support>>path:#H10.A0200BSupport]]
63	63
64	64
65		-
66		-
67		-
68		-
69		-
70		-
71	71	= 1. Introduction =
72	72
73	73	== 1.1 ​What is LoRaWAN Soil pH Sensor ==
74	74
75	75	(((
	70	+
	71	+
76	76	The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
77	77	)))
78	78
...	...	@@ -97,6 +97,7 @@
97	97
98	98
99	99
	96	+
100	100	== ​1.2 Features ==
101	101
102	102	* LoRaWAN 1.0.3 Class A
...	...	@@ -113,8 +113,6 @@
113	113	* IP68 rate for the Sensor Probe
114	114	* 8500mAh Battery for long term use
115	115
116		-
117		-
118	118	== 1.3 Probe Specification ==
119	119
120	120
...	...	@@ -135,14 +135,10 @@
135	135	* IP68 Protection
136	136	* Length: 3.5 meters
137	137
138		-
139		-
140	140	== 1.4 ​Applications ==
141	141
142	142	* Smart Agriculture
143	143
144		-
145		-
146	146	== 1.5 Pin mapping and power on ==
147	147
148	148	[[image:1654592472094-134.png]]
...	...	@@ -158,7 +158,7 @@
158	158	)))
159	159
160	160	(((
161		-In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
	152	+In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
162	162	)))
163	163
164	164
...	...	@@ -170,10 +170,14 @@
170	170
171	171	(((
172	172	[[image:1654592492399-921.png]]
	164	+
	165	+
173	173	)))
174	174
175	175	(((
176	176	The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
	170	+
	171	+
177	177	)))
178	178
179	179	(((
...	...	@@ -197,11 +197,13 @@
197	197	[[image:1654592600093-601.png]]
198	198
199	199
	195	+
200	200	**Add APP EUI and DEV EUI**
201	201
202	202	[[image:1654592619856-881.png]]
203	203
204	204
	201	+
205	205	**Add APP EUI in the application**
206	206
207	207	[[image:1654592632656-512.png]]
...	...	@@ -244,19 +244,17 @@
244	244	)))
245	245
246	246	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
247		-|(((
248		-**Size**
	244	+|=(% style="width: 62.5px;" %)(((
	245	+**Size (bytes)**
	246	+)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
	247	+|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
	248	+[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
249	249
250		-**(bytes)**
251		-)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
252		-|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
253		-[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
254		-
255		-[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
256		-)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
257		-[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
	250	+[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
	251	+)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
	252	+[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
258	258	)))|Reserve|(((
259		-[[Message Type>>path:#H2.3.6MessageType]]
	254	+[[Message Type>>||anchor="H2.3.6MessageType"]]
260	260	)))
261	261
262	262	[[image:1654592721645-318.png]]
...	...	@@ -312,7 +312,7 @@
312	312
313	313	=== 2.3.5 Interrupt Pin ===
314	314
315		-This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
	310	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
316	316
317	317
318	318	**Example:**
...	...	@@ -334,15 +334,12 @@
334	334	)))
335	335
336	336
337		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
338		-|=**Message Type Code**|=**Description**|=**Payload**
339		-|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
340		-|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
341		-|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
	332	+(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
	333	+|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
	334	+|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
	335	+|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
	336	+|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
342	342
343		-
344		-
345		-
346	346	=== 2.3.7 Decode payload in The Things Network ===
347	347
348	348	While using TTN network, you can add the payload format to decode the payload.
...	...	@@ -362,18 +362,27 @@
362	362
363	363	== 2.4 Uplink Interval ==
364	364
365		-The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
	357	+The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
366	366
367	367
368	368
369	369	== 2.5 ​Show Data in DataCake IoT Server ==
370	370
	363	+(((
371	371	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
	365	+)))
372	372
	367	+(((
	368	+
	369	+)))
373	373
	371	+(((
374	374	(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
	373	+)))
375	375
	375	+(((
376	376	(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
	377	+)))
377	377
378	378
379	379	[[image:1654592790040-760.png]]
...	...	@@ -396,9 +396,13 @@
396	396	[[image:1654592856403-259.png]]
397	397
398	398
	400	+(((
399	399	(% style="color:blue" %)**Step 5**(%%)**: add payload decode**
	402	+)))
400	400
	404	+(((
401	401	Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
	406	+)))
402	402
403	403
404	404	[[image:1654592878525-845.png]]
...	...	@@ -421,8 +421,10 @@
421	421	=== 2.6.1 Before measurement ===
422	422
423	423	(((
	429	+(((
424	424	If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.
425	425	)))
	432	+)))
426	426
427	427
428	428
...	...	@@ -429,24 +429,45 @@
429	429	=== 2.6.2 Measurement ===
430	430
431	431
	439	+(((
432	432	(% style="color:#4f81bd" %)**Measurement the soil surface:**
	441	+)))
433	433
	443	+(((
434	434	[[image:1654592946732-634.png]]
	445	+)))
435	435
	447	+(((
436	436	Choose the proper measuring position. Split the surface soil according to the measured deep.
	449	+)))
437	437
	451	+(((
438	438	Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
	453	+)))
439	439
	455	+(((
440	440	Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
	457	+)))
441	441
	459	+(((
442	442	Put soil over the probe after insert. And start to measure.
	461	+)))
443	443
	463	+(((
	464	+
	465	+)))
444	444
	467	+(((
445	445	(% style="color:#4f81bd" %)**Measurement inside soil:**
	469	+)))
446	446
	471	+(((
447	447	Dig a hole with diameter > 20CM.
	473	+)))
448	448
	475	+(((
449	449	Insert the probe inside, method like measure the surface.
	477	+)))
450	450
451	451
452	452
...	...	@@ -476,9 +476,13 @@
476	476
477	477	== 2.7 Calibration ==
478	478
	507	+(((
479	479	User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
	509	+)))
480	480
	511	+(((
481	481	After stable, user can use below command to calibrate.
	513	+)))
482	482
483	483	[[image:image-20220607171149-4.png]]
484	484
...	...	@@ -485,12 +485,10 @@
485	485
486	486	(% style="color:#037691" %)**Calibration Payload**
487	487
488		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
489		-|(((
490		-**Size**
491		-
492		-**(bytes)**
493		-)))|**1**|**1**|**1**|**7**|**1**
	520	+(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
	521	+|=(% style="width: 62.5px;" %)(((
	522	+**Size (bytes)**
	523	+)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
494	494	|**Value**|(((
495	495	PH4
496	496
...	...	@@ -500,7 +500,7 @@
500	500
501	501	Calibrate value
502	502	)))|Reserve|(((
503		-[[Message Type>>path:#H2.3.6MessageType]]
	533	+[[Message Type>>||anchor="H2.3.6MessageType"]]
504	504
505	505	Always 0x03
506	506	)))
...	...	@@ -515,7 +515,6 @@
515	515
516	516
517	517
518		-
519	519	== 2.8 Frequency Plans ==
520	520
521	521	(((
...	...	@@ -525,32 +525,61 @@
525	525
526	526	=== 2.8.1 EU863-870 (EU868) ===
527	527
	557	+(((
528	528	(% style="color:blue" %)**Uplink:**
	559	+)))
529	529
	561	+(((
530	530	868.1 - SF7BW125 to SF12BW125
	563	+)))
531	531
	565	+(((
532	532	868.3 - SF7BW125 to SF12BW125 and SF7BW250
	567	+)))
533	533
	569	+(((
534	534	868.5 - SF7BW125 to SF12BW125
	571	+)))
535	535
	573	+(((
536	536	867.1 - SF7BW125 to SF12BW125
	575	+)))
537	537
	577	+(((
538	538	867.3 - SF7BW125 to SF12BW125
	579	+)))
539	539
	581	+(((
540	540	867.5 - SF7BW125 to SF12BW125
	583	+)))
541	541
	585	+(((
542	542	867.7 - SF7BW125 to SF12BW125
	587	+)))
543	543
	589	+(((
544	544	867.9 - SF7BW125 to SF12BW125
	591	+)))
545	545
	593	+(((
546	546	868.8 - FSK
	595	+)))
547	547
	597	+(((
	598	+
	599	+)))
548	548
	601	+(((
549	549	(% style="color:blue" %)**Downlink:**
	603	+)))
550	550
	605	+(((
551	551	Uplink channels 1-9 (RX1)
	607	+)))
552	552
	609	+(((
553	553	869.525 - SF9BW125 (RX2 downlink only)
	611	+)))
554	554
555	555
556	556
...	...	@@ -572,48 +572,92 @@
572	572	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
573	573
574	574
	633	+
575	575	=== 2.8.3 CN470-510 (CN470) ===
576	576
	636	+(((
577	577	Used in China, Default use CHE=1
	638	+)))
578	578
	640	+(((
579	579	(% style="color:blue" %)**Uplink:**
	642	+)))
580	580
	644	+(((
581	581	486.3 - SF7BW125 to SF12BW125
	646	+)))
582	582
	648	+(((
583	583	486.5 - SF7BW125 to SF12BW125
	650	+)))
584	584
	652	+(((
585	585	486.7 - SF7BW125 to SF12BW125
	654	+)))
586	586
	656	+(((
587	587	486.9 - SF7BW125 to SF12BW125
	658	+)))
588	588
	660	+(((
589	589	487.1 - SF7BW125 to SF12BW125
	662	+)))
590	590
	664	+(((
591	591	487.3 - SF7BW125 to SF12BW125
	666	+)))
592	592
	668	+(((
593	593	487.5 - SF7BW125 to SF12BW125
	670	+)))
594	594
	672	+(((
595	595	487.7 - SF7BW125 to SF12BW125
	674	+)))
596	596
	676	+(((
	677	+
	678	+)))
597	597
	680	+(((
598	598	(% style="color:blue" %)**Downlink:**
	682	+)))
599	599
	684	+(((
600	600	506.7 - SF7BW125 to SF12BW125
	686	+)))
601	601
	688	+(((
602	602	506.9 - SF7BW125 to SF12BW125
	690	+)))
603	603
	692	+(((
604	604	507.1 - SF7BW125 to SF12BW125
	694	+)))
605	605
	696	+(((
606	606	507.3 - SF7BW125 to SF12BW125
	698	+)))
607	607
	700	+(((
608	608	507.5 - SF7BW125 to SF12BW125
	702	+)))
609	609
	704	+(((
610	610	507.7 - SF7BW125 to SF12BW125
	706	+)))
611	611
	708	+(((
612	612	507.9 - SF7BW125 to SF12BW125
	710	+)))
613	613
	712	+(((
614	614	508.1 - SF7BW125 to SF12BW125
	714	+)))
615	615
	716	+(((
616	616	505.3 - SF12BW125 (RX2 downlink only)
	718	+)))
617	617
618	618
619	619
...	...	@@ -638,112 +638,219 @@
638	638	* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
639	639	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
640	640
641		-
642		-
643	643	=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
644	644
	745	+(((
645	645	(% style="color:blue" %)**Default Uplink channel:**
	747	+)))
646	646
	749	+(((
647	647	923.2 - SF7BW125 to SF10BW125
	751	+)))
648	648
	753	+(((
649	649	923.4 - SF7BW125 to SF10BW125
	755	+)))
650	650
	757	+(((
	758	+
	759	+)))
651	651
	761	+(((
652	652	(% style="color:blue" %)**Additional Uplink Channel**:
	763	+)))
653	653
	765	+(((
654	654	(OTAA mode, channel added by JoinAccept message)
	767	+)))
655	655
	769	+(((
	770	+
	771	+)))
656	656
	773	+(((
657	657	(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
	775	+)))
658	658
	777	+(((
659	659	922.2 - SF7BW125 to SF10BW125
	779	+)))
660	660
	781	+(((
661	661	922.4 - SF7BW125 to SF10BW125
	783	+)))
662	662
	785	+(((
663	663	922.6 - SF7BW125 to SF10BW125
	787	+)))
664	664
	789	+(((
665	665	922.8 - SF7BW125 to SF10BW125
	791	+)))
666	666
	793	+(((
667	667	923.0 - SF7BW125 to SF10BW125
	795	+)))
668	668
	797	+(((
669	669	922.0 - SF7BW125 to SF10BW125
	799	+)))
670	670
	801	+(((
	802	+
	803	+)))
671	671
	805	+(((
672	672	(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
	807	+)))
673	673
	809	+(((
674	674	923.6 - SF7BW125 to SF10BW125
	811	+)))
675	675
	813	+(((
676	676	923.8 - SF7BW125 to SF10BW125
	815	+)))
677	677
	817	+(((
678	678	924.0 - SF7BW125 to SF10BW125
	819	+)))
679	679
	821	+(((
680	680	924.2 - SF7BW125 to SF10BW125
	823	+)))
681	681
	825	+(((
682	682	924.4 - SF7BW125 to SF10BW125
	827	+)))
683	683
	829	+(((
684	684	924.6 - SF7BW125 to SF10BW125
	831	+)))
685	685
	833	+(((
	834	+
	835	+)))
686	686
	837	+(((
687	687	(% style="color:blue" %)**Downlink:**
	839	+)))
688	688
	841	+(((
689	689	Uplink channels 1-8 (RX1)
	843	+)))
690	690
	845	+(((
691	691	923.2 - SF10BW125 (RX2)
	847	+)))
692	692
693	693
694	694
695	695	=== 2.8.6 KR920-923 (KR920) ===
696	696
	853	+(((
697	697	(% style="color:blue" %)**Default channel:**
	855	+)))
698	698
	857	+(((
699	699	922.1 - SF7BW125 to SF12BW125
	859	+)))
700	700
	861	+(((
701	701	922.3 - SF7BW125 to SF12BW125
	863	+)))
702	702
	865	+(((
703	703	922.5 - SF7BW125 to SF12BW125
	867	+)))
704	704
	869	+(((
	870	+
	871	+)))
705	705
	873	+(((
706	706	(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
	875	+)))
707	707
	877	+(((
708	708	922.1 - SF7BW125 to SF12BW125
	879	+)))
709	709
	881	+(((
710	710	922.3 - SF7BW125 to SF12BW125
	883	+)))
711	711
	885	+(((
712	712	922.5 - SF7BW125 to SF12BW125
	887	+)))
713	713
	889	+(((
714	714	922.7 - SF7BW125 to SF12BW125
	891	+)))
715	715
	893	+(((
716	716	922.9 - SF7BW125 to SF12BW125
	895	+)))
717	717
	897	+(((
718	718	923.1 - SF7BW125 to SF12BW125
	899	+)))
719	719
	901	+(((
720	720	923.3 - SF7BW125 to SF12BW125
	903	+)))
721	721
	905	+(((
	906	+
	907	+)))
722	722
	909	+(((
723	723	(% style="color:blue" %)**Downlink:**
	911	+)))
724	724
	913	+(((
725	725	Uplink channels 1-7(RX1)
	915	+)))
726	726
	917	+(((
727	727	921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
	919	+)))
728	728
729	729
730	730
731	731	=== 2.8.7 IN865-867 (IN865) ===
732	732
	925	+(((
733	733	(% style="color:blue" %)**Uplink:**
	927	+)))
734	734
	929	+(((
735	735	865.0625 - SF7BW125 to SF12BW125
	931	+)))
736	736
	933	+(((
737	737	865.4025 - SF7BW125 to SF12BW125
	935	+)))
738	738
	937	+(((
739	739	865.9850 - SF7BW125 to SF12BW125
	939	+)))
740	740
	941	+(((
	942	+
	943	+)))
741	741
	945	+(((
742	742	(% style="color:blue" %)**Downlink:**
	947	+)))
743	743
	949	+(((
744	744	Uplink channels 1-3 (RX1)
	951	+)))
745	745
	953	+(((
746	746	866.550 - SF10BW125 (RX2)
	955	+)))
747	747
748	748
749	749
...	...	@@ -754,8 +754,6 @@
754	754	* The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
755	755	* Blink once when device transmit a packet.
756	756
757		-
758		-
759	759	== 2.10 ​Firmware Change Log ==
760	760
761	761
...	...	@@ -770,26 +770,51 @@
770	770
771	771	= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
772	772
	980	+(((
773	773	Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
	982	+)))
774	774
775		-* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
776		-* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	984	+* (((
	985	+AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
	986	+)))
	987	+* (((
	988	+LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	989	+)))
777	777
	991	+(((
778	778	There are two kinds of commands to configure LSPH01, they are:
	993	+)))
779	779
780		-* (% style="color:#4f81bd" %)** General Commands**.
	995	+* (((
	996	+(% style="color:#4f81bd" %)** General Commands**.
	997	+)))
781	781
	999	+(((
782	782	These commands are to configure:
	1001	+)))
783	783
784		-* General system settings like: uplink interval.
785		-* LoRaWAN protocol & radio related command.
	1003	+* (((
	1004	+General system settings like: uplink interval.
	1005	+)))
	1006	+* (((
	1007	+LoRaWAN protocol & radio related command.
	1008	+)))
786	786
	1010	+(((
787	787	They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	1012	+)))
788	788
	1014	+(((
	1015	+
	1016	+)))
789	789
790		-* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1018	+* (((
	1019	+(% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1020	+)))
791	791
	1022	+(((
792	792	These commands only valid for LSPH01, as below:
	1024	+)))
793	793
794	794
795	795
...	...	@@ -802,19 +802,28 @@
802	802	[[image:image-20220607171554-8.png]]
803	803
804	804
805		-
	1037	+(((
806	806	(% style="color:#037691" %)**Downlink Command: 0x01**
	1039	+)))
807	807
	1041	+(((
808	808	Format: Command Code (0x01) followed by 3 bytes time value.
	1043	+)))
809	809
	1045	+(((
810	810	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	1047	+)))
811	811
812		-* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
813		-* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	1049	+* (((
	1050	+Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	1051	+)))
	1052	+* (((
	1053	+Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
814	814
815	815
	1056	+
	1057	+)))
816	816
817		-
818	818	== 3.2 Set Interrupt Mode ==
819	819
820	820	Feature, Set Interrupt mode for GPIO_EXIT.
...	...	@@ -821,22 +821,37 @@
821	821
822	822	(% style="color:#037691" %)**AT Command: AT+INTMOD**
823	823
824		-[[image:image-20220607171716-9.png]]
	1065	+[[image:image-20220610105907-1.png]]
825	825
826	826
	1068	+(((
827	827	(% style="color:#037691" %)**Downlink Command: 0x06**
	1070	+)))
828	828
	1072	+(((
829	829	Format: Command Code (0x06) followed by 3 bytes.
	1074	+)))
830	830
	1076	+(((
831	831	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
	1078	+)))
832	832
833		-* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
834		-* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1080	+* (((
	1081	+Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
	1082	+)))
	1083	+* (((
	1084	+Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1085	+)))
835	835
	1087	+(((
	1088	+
	1089	+)))
836	836
	1091	+
	1092	+
837	837	== 3.3 Calibrate Sensor ==
838	838
839		-Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
	1095	+Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
840	840
841	841
842	842
...	...	@@ -851,7 +851,6 @@
851	851	* Reply to the confirmation package: 26 01
852	852	* Reply to non-confirmed packet: 26 00
853	853
854		-
855	855	Device will send an uplink after got this downlink command. With below payload:
856	856
857	857	Configures info payload:
...	...	@@ -869,7 +869,7 @@
869	869
870	870	Version
871	871	)))|Sensor Type|Reserve|(((
872		-[[Message Type>>path:#H2.3.6MessageType]]
	1127	+[[Message Type>>||anchor="H2.3.6MessageType"]]
873	873	Always 0x02
874	874	)))
875	875
...	...	@@ -932,7 +932,7 @@
932	932	)))
933	933
934	934	(((
935		-The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
	1190	+The discharge curve is not linear so can't simply use percentage to show the battery level. Below is the battery performance.
936	936	)))
937	937
938	938	[[image:1654593587246-335.png]]
...	...	@@ -986,13 +986,13 @@
986	986	The battery related documents as below:
987	987
988	988	* (((
989		-[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
	1244	+[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
990	990	)))
991	991	* (((
992	992	[[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
993	993	)))
994	994	* (((
995		-[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
	1250	+[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
996	996	)))
997	997
998	998	[[image:image-20220607172042-11.png]]
...	...	@@ -1009,9 +1009,13 @@
1009	1009
1010	1010	=== ​4.3.2 Replace the battery ===
1011	1011
	1267	+(((
1012	1012	You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
	1269	+)))
1013	1013
	1271	+(((
1014	1014	The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
	1273	+)))
1015	1015
1016	1016
1017	1017
...	...	@@ -1032,29 +1032,29 @@
1032	1032	(% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1033	1033
1034	1034
	1294	+(((
1035	1035	In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
	1296	+)))
1036	1036
1037	1037
1038	1038	[[image:1654593712276-618.png]]
1039	1039
1040		-Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
	1301	+Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1041	1041
1042	1042
1043		-
1044	1044	= 6. FAQ =
1045	1045
1046	1046	== 6.1 How to change the LoRa Frequency Bands/Region ==
1047	1047
1048		-You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
	1308	+You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1049	1049	When downloading the images, choose the required image file for download. ​
1050	1050
1051	1051
1052		-
1053	1053	= 7. Trouble Shooting =
1054	1054
1055		-== 7.1 AT Commands input doesn’t work ==
	1314	+== 7.1 AT Commands input doesn't work ==
1056	1056
1057		-In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
	1316	+In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1058	1058
1059	1059
1060	1060
...	...	@@ -1075,6 +1075,9 @@
1075	1075	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1076	1076
1077	1077
	1337	+
	1338	+
	1339	+
1078	1078	= 9. ​Packing Info =
1079	1079
1080	1080
...	...	@@ -1090,6 +1090,9 @@
1090	1090	* Weight / pcs : g
1091	1091
1092	1092
	1355	+
	1356	+
	1357	+
1093	1093	= 10. ​Support =
1094	1094
1095	1095	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

image-20220610105907-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+15.5 KB

Content