Changes for page LSPH01 -- LoRaWAN Soil pH Sensor User Manual

Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 1 added, 0 removed)
  • image-20220610105907-1.png

Details

Page properties

Content

...	...	@@ -4,84 +4,49 @@
4	4
5	5
6	6
7		-**Contents:**
8	8
9		-* [[1. Introduction>>path:#H1.Introduction]]
10		-** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11		-** [[​1.2 Features>>path:#H200B1.2Features]]
12		-** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13		-** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14		-** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15		-* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16		-** [[2.1 How it works>>path:#H2.1Howitworks]]
17		-** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18		-** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19		-*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20		-*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21		-*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22		-*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23		-*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24		-*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25		-*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26		-** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27		-** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28		-** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29		-*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30		-*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31		-*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32		-** [[2.7 Calibration>>path:#H2.7Calibration]]
33		-** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34		-*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35		-*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36		-*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37		-*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38		-*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39		-*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40		-*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41		-** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42		-** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43		-* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44		-** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45		-** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46		-** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47		-** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48		-* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49		-** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50		-** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51		-** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52		-*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53		-*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54		-* [[5. Use AT Command>>path:#H5.UseATCommand]]
55		-** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56		-* [[6. FAQ>>path:#H6.FAQ]]
57		-** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58		-* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59		-** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60		-* [[8. Order Info>>path:#H8.OrderInfo]]
61		-* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62		-* [[10. ​Support>>path:#H10.A0200BSupport]]
63	63
64	64
65	65
66	66
	12	+**Table of Contents:**
67	67
	14	+{{toc/}}
68	68
69	69
70	70
71	71
	19	+
	20	+
	21	+
	22	+
	23	+
	24	+
72	72	= 1. Introduction =
73	73
74	74	== 1.1 ​What is LoRaWAN Soil pH Sensor ==
75	75
	29	+(((
	30	+
	31	+
76	76	The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
	33	+)))
77	77
	35	+(((
78	78	LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
	37	+)))
79	79
	39	+(((
80	80	The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
	41	+)))
81	81
	43	+(((
82	82	LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
	45	+)))
83	83
	47	+(((
84	84	Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	49	+)))
85	85
86	86
87	87	[[image:1654592435432-887.png]]
...	...	@@ -88,6 +88,7 @@
88	88
89	89
90	90
	56	+
91	91	== ​1.2 Features ==
92	92
93	93	* LoRaWAN 1.0.3 Class A
...	...	@@ -107,6 +107,7 @@
107	107
108	108
109	109
	76	+
110	110	== 1.3 Probe Specification ==
111	111
112	112
...	...	@@ -130,6 +130,7 @@
130	130
131	131
132	132
	100	+
133	133	== 1.4 ​Applications ==
134	134
135	135	* Smart Agriculture
...	...	@@ -137,6 +137,7 @@
137	137
138	138
139	139
	108	+
140	140	== 1.5 Pin mapping and power on ==
141	141
142	142	[[image:1654592472094-134.png]]
...	...	@@ -152,7 +152,7 @@
152	152	)))
153	153
154	154	(((
155		-In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
	124	+In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
156	156	)))
157	157
158	158
...	...	@@ -164,10 +164,14 @@
164	164
165	165	(((
166	166	[[image:1654592492399-921.png]]
	136	+
	137	+
167	167	)))
168	168
169	169	(((
170	170	The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
	142	+
	143	+
171	171	)))
172	172
173	173	(((
...	...	@@ -191,11 +191,13 @@
191	191	[[image:1654592600093-601.png]]
192	192
193	193
	167	+
194	194	**Add APP EUI and DEV EUI**
195	195
196	196	[[image:1654592619856-881.png]]
197	197
198	198
	173	+
199	199	**Add APP EUI in the application**
200	200
201	201	[[image:1654592632656-512.png]]
...	...	@@ -215,7 +215,9 @@
215	215	[[image:image-20220607170442-2.png]]
216	216
217	217
	193	+(((
218	218	(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	195	+)))
219	219
220	220	[[image:1654592697690-910.png]]
221	221
...	...	@@ -223,26 +223,30 @@
223	223
224	224	== 2.3 ​Uplink Payload ==
225	225
	203	+(((
226	226	LSPH01 will uplink payload via LoRaWAN with below payload format:
	205	+)))
227	227
	207	+(((
228	228	Uplink payload includes in total 11 bytes.
	209	+)))
229	229
	211	+(((
230	230	Normal uplink payload:
	213	+)))
231	231
232	232	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
233		-|(((
234		-**Size**
	216	+|=(% style="width: 62.5px;" %)(((
	217	+**Size (bytes)**
	218	+)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
	219	+|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
	220	+[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
235	235
236		-**(bytes)**
237		-)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
238		-|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
239		-[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
240		-
241		-[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
242		-)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
243		-[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
	222	+[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
	223	+)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
	224	+[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
244	244	)))|Reserve|(((
245		-[[Message Type>>path:#H2.3.6MessageType]]
	226	+[[Message Type>>||anchor="H2.3.6MessageType"]]
246	246	)))
247	247
248	248	[[image:1654592721645-318.png]]
...	...	@@ -298,7 +298,7 @@
298	298
299	299	=== 2.3.5 Interrupt Pin ===
300	300
301		-This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
	282	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
302	302
303	303
304	304	**Example:**
...	...	@@ -311,18 +311,25 @@
311	311
312	312	=== 2.3.6 Message Type ===
313	313
	295	+(((
314	314	For a normal uplink payload, the message type is always 0x01.
	297	+)))
315	315
	299	+(((
316	316	Valid Message Type:
	301	+)))
317	317
318	318
319		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
320		-|**Message Type Code**|**Description**|**Payload**
321		-|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
322		-|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
323		-|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
	304	+(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
	305	+|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
	306	+|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
	307	+|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
	308	+|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
324	324
325	325
	311	+
	312	+
	313	+
326	326	=== 2.3.7 Decode payload in The Things Network ===
327	327
328	328	While using TTN network, you can add the payload format to decode the payload.
...	...	@@ -342,18 +342,27 @@
342	342
343	343	== 2.4 Uplink Interval ==
344	344
345		-The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
	333	+The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
346	346
347	347
348	348
349	349	== 2.5 ​Show Data in DataCake IoT Server ==
350	350
	339	+(((
351	351	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
	341	+)))
352	352
	343	+(((
	344	+
	345	+)))
353	353
	347	+(((
354	354	(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
	349	+)))
355	355
	351	+(((
356	356	(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
	353	+)))
357	357
358	358
359	359	[[image:1654592790040-760.png]]
...	...	@@ -376,9 +376,13 @@
376	376	[[image:1654592856403-259.png]]
377	377
378	378
	376	+(((
379	379	(% style="color:blue" %)**Step 5**(%%)**: add payload decode**
	378	+)))
380	380
	380	+(((
381	381	Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
	382	+)))
382	382
383	383
384	384	[[image:1654592878525-845.png]]
...	...	@@ -401,8 +401,10 @@
401	401	=== 2.6.1 Before measurement ===
402	402
403	403	(((
	405	+(((
404	404	If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.
405	405	)))
	408	+)))
406	406
407	407
408	408
...	...	@@ -409,24 +409,45 @@
409	409	=== 2.6.2 Measurement ===
410	410
411	411
	415	+(((
412	412	(% style="color:#4f81bd" %)**Measurement the soil surface:**
	417	+)))
413	413
	419	+(((
414	414	[[image:1654592946732-634.png]]
	421	+)))
415	415
	423	+(((
416	416	Choose the proper measuring position. Split the surface soil according to the measured deep.
	425	+)))
417	417
	427	+(((
418	418	Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
	429	+)))
419	419
	431	+(((
420	420	Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
	433	+)))
421	421
	435	+(((
422	422	Put soil over the probe after insert. And start to measure.
	437	+)))
423	423
	439	+(((
	440	+
	441	+)))
424	424
	443	+(((
425	425	(% style="color:#4f81bd" %)**Measurement inside soil:**
	445	+)))
426	426
	447	+(((
427	427	Dig a hole with diameter > 20CM.
	449	+)))
428	428
	451	+(((
429	429	Insert the probe inside, method like measure the surface.
	453	+)))
430	430
431	431
432	432
...	...	@@ -456,9 +456,13 @@
456	456
457	457	== 2.7 Calibration ==
458	458
	483	+(((
459	459	User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
	485	+)))
460	460
	487	+(((
461	461	After stable, user can use below command to calibrate.
	489	+)))
462	462
463	463	[[image:image-20220607171149-4.png]]
464	464
...	...	@@ -465,12 +465,10 @@
465	465
466	466	(% style="color:#037691" %)**Calibration Payload**
467	467
468		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
469		-|(((
470		-**Size**
471		-
472		-**(bytes)**
473		-)))|**1**|**1**|**1**|**7**|**1**
	496	+(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
	497	+|=(% style="width: 62.5px;" %)(((
	498	+**Size (bytes)**
	499	+)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
474	474	|**Value**|(((
475	475	PH4
476	476
...	...	@@ -480,7 +480,7 @@
480	480
481	481	Calibrate value
482	482	)))|Reserve|(((
483		-[[Message Type>>path:#H2.3.6MessageType]]
	509	+[[Message Type>>||anchor="H2.3.6MessageType"]]
484	484
485	485	Always 0x03
486	486	)))
...	...	@@ -493,7 +493,6 @@
493	493	* Reply to the confirmation package: 14 01
494	494	* Reply to non-confirmed packet: 14 00
495	495
496		-
497	497	== 2.8 Frequency Plans ==
498	498
499	499	(((
...	...	@@ -503,32 +503,61 @@
503	503
504	504	=== 2.8.1 EU863-870 (EU868) ===
505	505
	531	+(((
506	506	(% style="color:blue" %)**Uplink:**
	533	+)))
507	507
	535	+(((
508	508	868.1 - SF7BW125 to SF12BW125
	537	+)))
509	509
	539	+(((
510	510	868.3 - SF7BW125 to SF12BW125 and SF7BW250
	541	+)))
511	511
	543	+(((
512	512	868.5 - SF7BW125 to SF12BW125
	545	+)))
513	513
	547	+(((
514	514	867.1 - SF7BW125 to SF12BW125
	549	+)))
515	515
	551	+(((
516	516	867.3 - SF7BW125 to SF12BW125
	553	+)))
517	517
	555	+(((
518	518	867.5 - SF7BW125 to SF12BW125
	557	+)))
519	519
	559	+(((
520	520	867.7 - SF7BW125 to SF12BW125
	561	+)))
521	521
	563	+(((
522	522	867.9 - SF7BW125 to SF12BW125
	565	+)))
523	523
	567	+(((
524	524	868.8 - FSK
	569	+)))
525	525
	571	+(((
	572	+
	573	+)))
526	526
	575	+(((
527	527	(% style="color:blue" %)**Downlink:**
	577	+)))
528	528
	579	+(((
529	529	Uplink channels 1-9 (RX1)
	581	+)))
530	530
	583	+(((
531	531	869.525 - SF9BW125 (RX2 downlink only)
	585	+)))
532	532
533	533
534	534
...	...	@@ -551,48 +551,93 @@
551	551
552	552
553	553
	608	+
	609	+
554	554	=== 2.8.3 CN470-510 (CN470) ===
555	555
	612	+(((
556	556	Used in China, Default use CHE=1
	614	+)))
557	557
	616	+(((
558	558	(% style="color:blue" %)**Uplink:**
	618	+)))
559	559
	620	+(((
560	560	486.3 - SF7BW125 to SF12BW125
	622	+)))
561	561
	624	+(((
562	562	486.5 - SF7BW125 to SF12BW125
	626	+)))
563	563
	628	+(((
564	564	486.7 - SF7BW125 to SF12BW125
	630	+)))
565	565
	632	+(((
566	566	486.9 - SF7BW125 to SF12BW125
	634	+)))
567	567
	636	+(((
568	568	487.1 - SF7BW125 to SF12BW125
	638	+)))
569	569
	640	+(((
570	570	487.3 - SF7BW125 to SF12BW125
	642	+)))
571	571
	644	+(((
572	572	487.5 - SF7BW125 to SF12BW125
	646	+)))
573	573
	648	+(((
574	574	487.7 - SF7BW125 to SF12BW125
	650	+)))
575	575
	652	+(((
	653	+
	654	+)))
576	576
	656	+(((
577	577	(% style="color:blue" %)**Downlink:**
	658	+)))
578	578
	660	+(((
579	579	506.7 - SF7BW125 to SF12BW125
	662	+)))
580	580
	664	+(((
581	581	506.9 - SF7BW125 to SF12BW125
	666	+)))
582	582
	668	+(((
583	583	507.1 - SF7BW125 to SF12BW125
	670	+)))
584	584
	672	+(((
585	585	507.3 - SF7BW125 to SF12BW125
	674	+)))
586	586
	676	+(((
587	587	507.5 - SF7BW125 to SF12BW125
	678	+)))
588	588
	680	+(((
589	589	507.7 - SF7BW125 to SF12BW125
	682	+)))
590	590
	684	+(((
591	591	507.9 - SF7BW125 to SF12BW125
	686	+)))
592	592
	688	+(((
593	593	508.1 - SF7BW125 to SF12BW125
	690	+)))
594	594
	692	+(((
595	595	505.3 - SF12BW125 (RX2 downlink only)
	694	+)))
596	596
597	597
598	598
...	...	@@ -619,110 +619,221 @@
619	619
620	620
621	621
	721	+
	722	+
622	622	=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
623	623
	725	+(((
624	624	(% style="color:blue" %)**Default Uplink channel:**
	727	+)))
625	625
	729	+(((
626	626	923.2 - SF7BW125 to SF10BW125
	731	+)))
627	627
	733	+(((
628	628	923.4 - SF7BW125 to SF10BW125
	735	+)))
629	629
	737	+(((
	738	+
	739	+)))
630	630
	741	+(((
631	631	(% style="color:blue" %)**Additional Uplink Channel**:
	743	+)))
632	632
	745	+(((
633	633	(OTAA mode, channel added by JoinAccept message)
	747	+)))
634	634
	749	+(((
	750	+
	751	+)))
635	635
	753	+(((
636	636	(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
	755	+)))
637	637
	757	+(((
638	638	922.2 - SF7BW125 to SF10BW125
	759	+)))
639	639
	761	+(((
640	640	922.4 - SF7BW125 to SF10BW125
	763	+)))
641	641
	765	+(((
642	642	922.6 - SF7BW125 to SF10BW125
	767	+)))
643	643
	769	+(((
644	644	922.8 - SF7BW125 to SF10BW125
	771	+)))
645	645
	773	+(((
646	646	923.0 - SF7BW125 to SF10BW125
	775	+)))
647	647
	777	+(((
648	648	922.0 - SF7BW125 to SF10BW125
	779	+)))
649	649
	781	+(((
	782	+
	783	+)))
650	650
	785	+(((
651	651	(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
	787	+)))
652	652
	789	+(((
653	653	923.6 - SF7BW125 to SF10BW125
	791	+)))
654	654
	793	+(((
655	655	923.8 - SF7BW125 to SF10BW125
	795	+)))
656	656
	797	+(((
657	657	924.0 - SF7BW125 to SF10BW125
	799	+)))
658	658
	801	+(((
659	659	924.2 - SF7BW125 to SF10BW125
	803	+)))
660	660
	805	+(((
661	661	924.4 - SF7BW125 to SF10BW125
	807	+)))
662	662
	809	+(((
663	663	924.6 - SF7BW125 to SF10BW125
	811	+)))
664	664
	813	+(((
	814	+
	815	+)))
665	665
	817	+(((
666	666	(% style="color:blue" %)**Downlink:**
	819	+)))
667	667
	821	+(((
668	668	Uplink channels 1-8 (RX1)
	823	+)))
669	669
	825	+(((
670	670	923.2 - SF10BW125 (RX2)
	827	+)))
671	671
672	672
673	673
674	674	=== 2.8.6 KR920-923 (KR920) ===
675	675
	833	+(((
676	676	(% style="color:blue" %)**Default channel:**
	835	+)))
677	677
	837	+(((
678	678	922.1 - SF7BW125 to SF12BW125
	839	+)))
679	679
	841	+(((
680	680	922.3 - SF7BW125 to SF12BW125
	843	+)))
681	681
	845	+(((
682	682	922.5 - SF7BW125 to SF12BW125
	847	+)))
683	683
	849	+(((
	850	+
	851	+)))
684	684
	853	+(((
685	685	(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
	855	+)))
686	686
	857	+(((
687	687	922.1 - SF7BW125 to SF12BW125
	859	+)))
688	688
	861	+(((
689	689	922.3 - SF7BW125 to SF12BW125
	863	+)))
690	690
	865	+(((
691	691	922.5 - SF7BW125 to SF12BW125
	867	+)))
692	692
	869	+(((
693	693	922.7 - SF7BW125 to SF12BW125
	871	+)))
694	694
	873	+(((
695	695	922.9 - SF7BW125 to SF12BW125
	875	+)))
696	696
	877	+(((
697	697	923.1 - SF7BW125 to SF12BW125
	879	+)))
698	698
	881	+(((
699	699	923.3 - SF7BW125 to SF12BW125
	883	+)))
700	700
	885	+(((
	886	+
	887	+)))
701	701
	889	+(((
702	702	(% style="color:blue" %)**Downlink:**
	891	+)))
703	703
	893	+(((
704	704	Uplink channels 1-7(RX1)
	895	+)))
705	705
	897	+(((
706	706	921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
	899	+)))
707	707
708	708
709	709
710	710	=== 2.8.7 IN865-867 (IN865) ===
711	711
	905	+(((
712	712	(% style="color:blue" %)**Uplink:**
	907	+)))
713	713
	909	+(((
714	714	865.0625 - SF7BW125 to SF12BW125
	911	+)))
715	715
	913	+(((
716	716	865.4025 - SF7BW125 to SF12BW125
	915	+)))
717	717
	917	+(((
718	718	865.9850 - SF7BW125 to SF12BW125
	919	+)))
719	719
	921	+(((
	922	+
	923	+)))
720	720
	925	+(((
721	721	(% style="color:blue" %)**Downlink:**
	927	+)))
722	722
	929	+(((
723	723	Uplink channels 1-3 (RX1)
	931	+)))
724	724
	933	+(((
725	725	866.550 - SF10BW125 (RX2)
	935	+)))
726	726
727	727
728	728
...	...	@@ -735,6 +735,8 @@
735	735
736	736
737	737
	948	+
	949	+
738	738	== 2.10 ​Firmware Change Log ==
739	739
740	740
...	...	@@ -749,26 +749,51 @@
749	749
750	750	= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
751	751
	964	+(((
752	752	Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
	966	+)))
753	753
754		-* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
755		-* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	968	+* (((
	969	+AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
	970	+)))
	971	+* (((
	972	+LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	973	+)))
756	756
	975	+(((
757	757	There are two kinds of commands to configure LSPH01, they are:
	977	+)))
758	758
759		-* (% style="color:#4f81bd" %)** General Commands**.
	979	+* (((
	980	+(% style="color:#4f81bd" %)** General Commands**.
	981	+)))
760	760
	983	+(((
761	761	These commands are to configure:
	985	+)))
762	762
763		-* General system settings like: uplink interval.
764		-* LoRaWAN protocol & radio related command.
	987	+* (((
	988	+General system settings like: uplink interval.
	989	+)))
	990	+* (((
	991	+LoRaWAN protocol & radio related command.
	992	+)))
765	765
	994	+(((
766	766	They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	996	+)))
767	767
	998	+(((
	999	+
	1000	+)))
768	768
769		-* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1002	+* (((
	1003	+(% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1004	+)))
770	770
	1006	+(((
771	771	These commands only valid for LSPH01, as below:
	1008	+)))
772	772
773	773
774	774
...	...	@@ -781,17 +781,28 @@
781	781	[[image:image-20220607171554-8.png]]
782	782
783	783
784		-
	1021	+(((
785	785	(% style="color:#037691" %)**Downlink Command: 0x01**
	1023	+)))
786	786
	1025	+(((
787	787	Format: Command Code (0x01) followed by 3 bytes time value.
	1027	+)))
788	788
	1029	+(((
789	789	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	1031	+)))
790	790
791		-* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
792		-* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	1033	+* (((
	1034	+Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	1035	+)))
	1036	+* (((
	1037	+Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
793	793
794	794
	1040	+
	1041	+)))
	1042	+
795	795	== 3.2 Set Interrupt Mode ==
796	796
797	797	Feature, Set Interrupt mode for GPIO_EXIT.
...	...	@@ -798,23 +798,37 @@
798	798
799	799	(% style="color:#037691" %)**AT Command: AT+INTMOD**
800	800
801		-[[image:image-20220607171716-9.png]]
	1049	+[[image:image-20220610105907-1.png]]
802	802
803	803
	1052	+(((
804	804	(% style="color:#037691" %)**Downlink Command: 0x06**
	1054	+)))
805	805
	1056	+(((
806	806	Format: Command Code (0x06) followed by 3 bytes.
	1058	+)))
807	807
	1060	+(((
808	808	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
	1062	+)))
809	809
810		-* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
811		-* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1064	+* (((
	1065	+Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
	1066	+)))
	1067	+* (((
	1068	+Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1069	+)))
812	812
	1071	+(((
	1072	+
	1073	+)))
813	813
814	814
	1076	+
815	815	== 3.3 Calibrate Sensor ==
816	816
817		-Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
	1079	+Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
818	818
819	819
820	820
...	...	@@ -846,14 +846,14 @@
846	846
847	847	Version
848	848	)))|Sensor Type|Reserve|(((
849		-[[Message Type>>path:#H2.3.6MessageType]]
	1111	+[[Message Type>>||anchor="H2.3.6MessageType"]]
850	850	Always 0x02
851	851	)))
852	852
853		-**Software Type**: Always 0x03 for LSPH01
	1115	+(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LSPH01
854	854
855	855
856		-**Frequency Band**:
	1118	+(% style="color:#037691" %)**Frequency Band**:
857	857
858	858	*0x01: EU868
859	859
...	...	@@ -876,13 +876,13 @@
876	876	*0xa0: AS923-3
877	877
878	878
879		-**Sub-Band**: value 0x00 ~~ 0x08
	1141	+(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
880	880
881	881
882		-**Firmware Version**: 0x0100, Means: v1.0.0 version
	1144	+(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
883	883
884	884
885		-**Sensor Type**:
	1147	+(% style="color:#037691" %)**Sensor Type**:
886	886
887	887	0x01: LSE01
888	888
...	...	@@ -909,7 +909,7 @@
909	909	)))
910	910
911	911	(((
912		-The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
	1174	+The discharge curve is not linear so can't simply use percentage to show the battery level. Below is the battery performance.
913	913	)))
914	914
915	915	[[image:1654593587246-335.png]]
...	...	@@ -944,12 +944,12 @@
944	944	)))
945	945
946	946
947		-**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
	1209	+(% style="color:red" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
948	948
949	949	[[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
950	950
951	951
952		-**Step 2**: Open it and choose
	1214	+(% style="color:#037691" %)**Step 2**(%%): Open it and choose
953	953
954	954	* Product Model
955	955	* Uplink Interval
...	...	@@ -963,13 +963,13 @@
963	963	The battery related documents as below:
964	964
965	965	* (((
966		-[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
	1228	+[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
967	967	)))
968	968	* (((
969	969	[[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
970	970	)))
971	971	* (((
972		-[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
	1234	+[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
973	973	)))
974	974
975	975	[[image:image-20220607172042-11.png]]
...	...	@@ -986,9 +986,13 @@
986	986
987	987	=== ​4.3.2 Replace the battery ===
988	988
989		-You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
	1251	+(((
	1252	+You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
	1253	+)))
990	990
	1255	+(((
991	991	The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
	1257	+)))
992	992
993	993
994	994
...	...	@@ -1009,29 +1009,29 @@
1009	1009	(% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1010	1010
1011	1011
	1278	+(((
1012	1012	In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
	1280	+)))
1013	1013
1014	1014
1015	1015	[[image:1654593712276-618.png]]
1016	1016
1017		-Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
	1285	+Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1018	1018
1019	1019
1020		-
1021	1021	= 6. FAQ =
1022	1022
1023	1023	== 6.1 How to change the LoRa Frequency Bands/Region ==
1024	1024
1025		-You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
	1292	+You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1026	1026	When downloading the images, choose the required image file for download. ​
1027	1027
1028	1028
1029		-
1030	1030	= 7. Trouble Shooting =
1031	1031
1032		-== 7.1 AT Commands input doesn’t work ==
	1298	+== 7.1 AT Commands input doesn't work ==
1033	1033
1034		-In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
	1300	+In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1035	1035
1036	1036
1037	1037

image-20220610105907-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+15.5 KB

Content