Changes for page LSPH01 -- LoRaWAN Soil pH Sensor User Manual

Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 1 added, 0 removed)
  • image-20220610105907-1.png

Details

Page properties

Content

...	...	@@ -4,84 +4,49 @@
4	4
5	5
6	6
7		-**Contents:**
8	8
9		-* [[1. Introduction>>path:#H1.Introduction]]
10		-** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11		-** [[​1.2 Features>>path:#H200B1.2Features]]
12		-** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13		-** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14		-** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15		-* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16		-** [[2.1 How it works>>path:#H2.1Howitworks]]
17		-** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18		-** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19		-*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20		-*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21		-*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22		-*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23		-*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24		-*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25		-*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26		-** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27		-** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28		-** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29		-*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30		-*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31		-*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32		-** [[2.7 Calibration>>path:#H2.7Calibration]]
33		-** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34		-*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35		-*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36		-*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37		-*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38		-*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39		-*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40		-*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41		-** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42		-** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43		-* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44		-** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45		-** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46		-** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47		-** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48		-* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49		-** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50		-** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51		-** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52		-*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53		-*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54		-* [[5. Use AT Command>>path:#H5.UseATCommand]]
55		-** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56		-* [[6. FAQ>>path:#H6.FAQ]]
57		-** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58		-* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59		-** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60		-* [[8. Order Info>>path:#H8.OrderInfo]]
61		-* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62		-* [[10. ​Support>>path:#H10.A0200BSupport]]
63	63
64	64
65	65
66	66
	12	+**Table of Contents:**
67	67
	14	+{{toc/}}
68	68
69	69
70	70
71	71
	19	+
	20	+
	21	+
	22	+
	23	+
	24	+
72	72	= 1. Introduction =
73	73
74	74	== 1.1 ​What is LoRaWAN Soil pH Sensor ==
75	75
	29	+(((
	30	+
	31	+
76	76	The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
	33	+)))
77	77
	35	+(((
78	78	LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
	37	+)))
79	79
	39	+(((
80	80	The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
	41	+)))
81	81
	43	+(((
82	82	LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
	45	+)))
83	83
	47	+(((
84	84	Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	49	+)))
85	85
86	86
87	87	[[image:1654592435432-887.png]]
...	...	@@ -88,6 +88,7 @@
88	88
89	89
90	90
	56	+
91	91	== ​1.2 Features ==
92	92
93	93	* LoRaWAN 1.0.3 Class A
...	...	@@ -104,9 +104,6 @@
104	104	* IP68 rate for the Sensor Probe
105	105	* 8500mAh Battery for long term use
106	106
107		-
108		-
109		-
110	110	== 1.3 Probe Specification ==
111	111
112	112
...	...	@@ -127,9 +127,6 @@
127	127	* IP68 Protection
128	128	* Length: 3.5 meters
129	129
130		-
131		-
132		-
133	133	== 1.4 ​Applications ==
134	134
135	135	* Smart Agriculture
...	...	@@ -149,7 +149,7 @@
149	149	)))
150	150
151	151	(((
152		-In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
	112	+In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
153	153	)))
154	154
155	155
...	...	@@ -161,10 +161,14 @@
161	161
162	162	(((
163	163	[[image:1654592492399-921.png]]
	124	+
	125	+
164	164	)))
165	165
166	166	(((
167	167	The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
	130	+
	131	+
168	168	)))
169	169
170	170	(((
...	...	@@ -188,11 +188,13 @@
188	188	[[image:1654592600093-601.png]]
189	189
190	190
	155	+
191	191	**Add APP EUI and DEV EUI**
192	192
193	193	[[image:1654592619856-881.png]]
194	194
195	195
	161	+
196	196	**Add APP EUI in the application**
197	197
198	198	[[image:1654592632656-512.png]]
...	...	@@ -212,7 +212,9 @@
212	212	[[image:image-20220607170442-2.png]]
213	213
214	214
	181	+(((
215	215	(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	183	+)))
216	216
217	217	[[image:1654592697690-910.png]]
218	218
...	...	@@ -220,26 +220,30 @@
220	220
221	221	== 2.3 ​Uplink Payload ==
222	222
	191	+(((
223	223	LSPH01 will uplink payload via LoRaWAN with below payload format:
	193	+)))
224	224
	195	+(((
225	225	Uplink payload includes in total 11 bytes.
	197	+)))
226	226
	199	+(((
227	227	Normal uplink payload:
	201	+)))
228	228
229	229	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
230		-|(((
231		-**Size**
	204	+|=(% style="width: 62.5px;" %)(((
	205	+**Size (bytes)**
	206	+)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
	207	+|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
	208	+[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
232	232
233		-**(bytes)**
234		-)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
235		-|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
236		-[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
237		-
238		-[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
239		-)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
240		-[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
	210	+[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
	211	+)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
	212	+[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
241	241	)))|Reserve|(((
242		-[[Message Type>>path:#H2.3.6MessageType]]
	214	+[[Message Type>>||anchor="H2.3.6MessageType"]]
243	243	)))
244	244
245	245	[[image:1654592721645-318.png]]
...	...	@@ -295,7 +295,7 @@
295	295
296	296	=== 2.3.5 Interrupt Pin ===
297	297
298		-This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
	270	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
299	299
300	300
301	301	**Example:**
...	...	@@ -308,18 +308,21 @@
308	308
309	309	=== 2.3.6 Message Type ===
310	310
	283	+(((
311	311	For a normal uplink payload, the message type is always 0x01.
	285	+)))
312	312
	287	+(((
313	313	Valid Message Type:
	289	+)))
314	314
315	315
316		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
317		-|**Message Type Code**|**Description**|**Payload**
318		-|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
319		-|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
320		-|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
	292	+(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
	293	+|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
	294	+|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
	295	+|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
	296	+|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
321	321
322		-
323	323	=== 2.3.7 Decode payload in The Things Network ===
324	324
325	325	While using TTN network, you can add the payload format to decode the payload.
...	...	@@ -339,18 +339,27 @@
339	339
340	340	== 2.4 Uplink Interval ==
341	341
342		-The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
	317	+The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
343	343
344	344
345	345
346	346	== 2.5 ​Show Data in DataCake IoT Server ==
347	347
	323	+(((
348	348	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
	325	+)))
349	349
	327	+(((
	328	+
	329	+)))
350	350
	331	+(((
351	351	(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
	333	+)))
352	352
	335	+(((
353	353	(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
	337	+)))
354	354
355	355
356	356	[[image:1654592790040-760.png]]
...	...	@@ -373,9 +373,13 @@
373	373	[[image:1654592856403-259.png]]
374	374
375	375
	360	+(((
376	376	(% style="color:blue" %)**Step 5**(%%)**: add payload decode**
	362	+)))
377	377
	364	+(((
378	378	Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
	366	+)))
379	379
380	380
381	381	[[image:1654592878525-845.png]]
...	...	@@ -398,8 +398,10 @@
398	398	=== 2.6.1 Before measurement ===
399	399
400	400	(((
	389	+(((
401	401	If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.
402	402	)))
	392	+)))
403	403
404	404
405	405
...	...	@@ -406,24 +406,45 @@
406	406	=== 2.6.2 Measurement ===
407	407
408	408
	399	+(((
409	409	(% style="color:#4f81bd" %)**Measurement the soil surface:**
	401	+)))
410	410
	403	+(((
411	411	[[image:1654592946732-634.png]]
	405	+)))
412	412
	407	+(((
413	413	Choose the proper measuring position. Split the surface soil according to the measured deep.
	409	+)))
414	414
	411	+(((
415	415	Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
	413	+)))
416	416
	415	+(((
417	417	Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
	417	+)))
418	418
	419	+(((
419	419	Put soil over the probe after insert. And start to measure.
	421	+)))
420	420
	423	+(((
	424	+
	425	+)))
421	421
	427	+(((
422	422	(% style="color:#4f81bd" %)**Measurement inside soil:**
	429	+)))
423	423
	431	+(((
424	424	Dig a hole with diameter > 20CM.
	433	+)))
425	425
	435	+(((
426	426	Insert the probe inside, method like measure the surface.
	437	+)))
427	427
428	428
429	429
...	...	@@ -453,9 +453,13 @@
453	453
454	454	== 2.7 Calibration ==
455	455
	467	+(((
456	456	User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
	469	+)))
457	457
	471	+(((
458	458	After stable, user can use below command to calibrate.
	473	+)))
459	459
460	460	[[image:image-20220607171149-4.png]]
461	461
...	...	@@ -462,12 +462,10 @@
462	462
463	463	(% style="color:#037691" %)**Calibration Payload**
464	464
465		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
466		-|(((
467		-**Size**
468		-
469		-**(bytes)**
470		-)))|**1**|**1**|**1**|**7**|**1**
	480	+(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
	481	+|=(% style="width: 62.5px;" %)(((
	482	+**Size (bytes)**
	483	+)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
471	471	|**Value**|(((
472	472	PH4
473	473
...	...	@@ -477,7 +477,7 @@
477	477
478	478	Calibrate value
479	479	)))|Reserve|(((
480		-[[Message Type>>path:#H2.3.6MessageType]]
	493	+[[Message Type>>||anchor="H2.3.6MessageType"]]
481	481
482	482	Always 0x03
483	483	)))
...	...	@@ -490,7 +490,6 @@
490	490	* Reply to the confirmation package: 14 01
491	491	* Reply to non-confirmed packet: 14 00
492	492
493		-
494	494	== 2.8 Frequency Plans ==
495	495
496	496	(((
...	...	@@ -500,32 +500,61 @@
500	500
501	501	=== 2.8.1 EU863-870 (EU868) ===
502	502
	515	+(((
503	503	(% style="color:blue" %)**Uplink:**
	517	+)))
504	504
	519	+(((
505	505	868.1 - SF7BW125 to SF12BW125
	521	+)))
506	506
	523	+(((
507	507	868.3 - SF7BW125 to SF12BW125 and SF7BW250
	525	+)))
508	508
	527	+(((
509	509	868.5 - SF7BW125 to SF12BW125
	529	+)))
510	510
	531	+(((
511	511	867.1 - SF7BW125 to SF12BW125
	533	+)))
512	512
	535	+(((
513	513	867.3 - SF7BW125 to SF12BW125
	537	+)))
514	514
	539	+(((
515	515	867.5 - SF7BW125 to SF12BW125
	541	+)))
516	516
	543	+(((
517	517	867.7 - SF7BW125 to SF12BW125
	545	+)))
518	518
	547	+(((
519	519	867.9 - SF7BW125 to SF12BW125
	549	+)))
520	520
	551	+(((
521	521	868.8 - FSK
	553	+)))
522	522
	555	+(((
	556	+
	557	+)))
523	523
	559	+(((
524	524	(% style="color:blue" %)**Downlink:**
	561	+)))
525	525
	563	+(((
526	526	Uplink channels 1-9 (RX1)
	565	+)))
527	527
	567	+(((
528	528	869.525 - SF9BW125 (RX2 downlink only)
	569	+)))
529	529
530	530
531	531
...	...	@@ -548,48 +548,93 @@
548	548
549	549
550	550
	592	+
	593	+
551	551	=== 2.8.3 CN470-510 (CN470) ===
552	552
	596	+(((
553	553	Used in China, Default use CHE=1
	598	+)))
554	554
	600	+(((
555	555	(% style="color:blue" %)**Uplink:**
	602	+)))
556	556
	604	+(((
557	557	486.3 - SF7BW125 to SF12BW125
	606	+)))
558	558
	608	+(((
559	559	486.5 - SF7BW125 to SF12BW125
	610	+)))
560	560
	612	+(((
561	561	486.7 - SF7BW125 to SF12BW125
	614	+)))
562	562
	616	+(((
563	563	486.9 - SF7BW125 to SF12BW125
	618	+)))
564	564
	620	+(((
565	565	487.1 - SF7BW125 to SF12BW125
	622	+)))
566	566
	624	+(((
567	567	487.3 - SF7BW125 to SF12BW125
	626	+)))
568	568
	628	+(((
569	569	487.5 - SF7BW125 to SF12BW125
	630	+)))
570	570
	632	+(((
571	571	487.7 - SF7BW125 to SF12BW125
	634	+)))
572	572
	636	+(((
	637	+
	638	+)))
573	573
	640	+(((
574	574	(% style="color:blue" %)**Downlink:**
	642	+)))
575	575
	644	+(((
576	576	506.7 - SF7BW125 to SF12BW125
	646	+)))
577	577
	648	+(((
578	578	506.9 - SF7BW125 to SF12BW125
	650	+)))
579	579
	652	+(((
580	580	507.1 - SF7BW125 to SF12BW125
	654	+)))
581	581
	656	+(((
582	582	507.3 - SF7BW125 to SF12BW125
	658	+)))
583	583
	660	+(((
584	584	507.5 - SF7BW125 to SF12BW125
	662	+)))
585	585
	664	+(((
586	586	507.7 - SF7BW125 to SF12BW125
	666	+)))
587	587
	668	+(((
588	588	507.9 - SF7BW125 to SF12BW125
	670	+)))
589	589
	672	+(((
590	590	508.1 - SF7BW125 to SF12BW125
	674	+)))
591	591
	676	+(((
592	592	505.3 - SF12BW125 (RX2 downlink only)
	678	+)))
593	593
594	594
595	595
...	...	@@ -616,110 +616,221 @@
616	616
617	617
618	618
	705	+
	706	+
619	619	=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
620	620
	709	+(((
621	621	(% style="color:blue" %)**Default Uplink channel:**
	711	+)))
622	622
	713	+(((
623	623	923.2 - SF7BW125 to SF10BW125
	715	+)))
624	624
	717	+(((
625	625	923.4 - SF7BW125 to SF10BW125
	719	+)))
626	626
	721	+(((
	722	+
	723	+)))
627	627
	725	+(((
628	628	(% style="color:blue" %)**Additional Uplink Channel**:
	727	+)))
629	629
	729	+(((
630	630	(OTAA mode, channel added by JoinAccept message)
	731	+)))
631	631
	733	+(((
	734	+
	735	+)))
632	632
	737	+(((
633	633	(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
	739	+)))
634	634
	741	+(((
635	635	922.2 - SF7BW125 to SF10BW125
	743	+)))
636	636
	745	+(((
637	637	922.4 - SF7BW125 to SF10BW125
	747	+)))
638	638
	749	+(((
639	639	922.6 - SF7BW125 to SF10BW125
	751	+)))
640	640
	753	+(((
641	641	922.8 - SF7BW125 to SF10BW125
	755	+)))
642	642
	757	+(((
643	643	923.0 - SF7BW125 to SF10BW125
	759	+)))
644	644
	761	+(((
645	645	922.0 - SF7BW125 to SF10BW125
	763	+)))
646	646
	765	+(((
	766	+
	767	+)))
647	647
	769	+(((
648	648	(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
	771	+)))
649	649
	773	+(((
650	650	923.6 - SF7BW125 to SF10BW125
	775	+)))
651	651
	777	+(((
652	652	923.8 - SF7BW125 to SF10BW125
	779	+)))
653	653
	781	+(((
654	654	924.0 - SF7BW125 to SF10BW125
	783	+)))
655	655
	785	+(((
656	656	924.2 - SF7BW125 to SF10BW125
	787	+)))
657	657
	789	+(((
658	658	924.4 - SF7BW125 to SF10BW125
	791	+)))
659	659
	793	+(((
660	660	924.6 - SF7BW125 to SF10BW125
	795	+)))
661	661
	797	+(((
	798	+
	799	+)))
662	662
	801	+(((
663	663	(% style="color:blue" %)**Downlink:**
	803	+)))
664	664
	805	+(((
665	665	Uplink channels 1-8 (RX1)
	807	+)))
666	666
	809	+(((
667	667	923.2 - SF10BW125 (RX2)
	811	+)))
668	668
669	669
670	670
671	671	=== 2.8.6 KR920-923 (KR920) ===
672	672
	817	+(((
673	673	(% style="color:blue" %)**Default channel:**
	819	+)))
674	674
	821	+(((
675	675	922.1 - SF7BW125 to SF12BW125
	823	+)))
676	676
	825	+(((
677	677	922.3 - SF7BW125 to SF12BW125
	827	+)))
678	678
	829	+(((
679	679	922.5 - SF7BW125 to SF12BW125
	831	+)))
680	680
	833	+(((
	834	+
	835	+)))
681	681
	837	+(((
682	682	(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
	839	+)))
683	683
	841	+(((
684	684	922.1 - SF7BW125 to SF12BW125
	843	+)))
685	685
	845	+(((
686	686	922.3 - SF7BW125 to SF12BW125
	847	+)))
687	687
	849	+(((
688	688	922.5 - SF7BW125 to SF12BW125
	851	+)))
689	689
	853	+(((
690	690	922.7 - SF7BW125 to SF12BW125
	855	+)))
691	691
	857	+(((
692	692	922.9 - SF7BW125 to SF12BW125
	859	+)))
693	693
	861	+(((
694	694	923.1 - SF7BW125 to SF12BW125
	863	+)))
695	695
	865	+(((
696	696	923.3 - SF7BW125 to SF12BW125
	867	+)))
697	697
	869	+(((
	870	+
	871	+)))
698	698
	873	+(((
699	699	(% style="color:blue" %)**Downlink:**
	875	+)))
700	700
	877	+(((
701	701	Uplink channels 1-7(RX1)
	879	+)))
702	702
	881	+(((
703	703	921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
	883	+)))
704	704
705	705
706	706
707	707	=== 2.8.7 IN865-867 (IN865) ===
708	708
	889	+(((
709	709	(% style="color:blue" %)**Uplink:**
	891	+)))
710	710
	893	+(((
711	711	865.0625 - SF7BW125 to SF12BW125
	895	+)))
712	712
	897	+(((
713	713	865.4025 - SF7BW125 to SF12BW125
	899	+)))
714	714
	901	+(((
715	715	865.9850 - SF7BW125 to SF12BW125
	903	+)))
716	716
	905	+(((
	906	+
	907	+)))
717	717
	909	+(((
718	718	(% style="color:blue" %)**Downlink:**
	911	+)))
719	719
	913	+(((
720	720	Uplink channels 1-3 (RX1)
	915	+)))
721	721
	917	+(((
722	722	866.550 - SF10BW125 (RX2)
	919	+)))
723	723
724	724
725	725
...	...	@@ -732,6 +732,8 @@
732	732
733	733
734	734
	932	+
	933	+
735	735	== 2.10 ​Firmware Change Log ==
736	736
737	737
...	...	@@ -746,26 +746,51 @@
746	746
747	747	= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
748	748
	948	+(((
749	749	Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
	950	+)))
750	750
751		-* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
752		-* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	952	+* (((
	953	+AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
	954	+)))
	955	+* (((
	956	+LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	957	+)))
753	753
	959	+(((
754	754	There are two kinds of commands to configure LSPH01, they are:
	961	+)))
755	755
756		-* (% style="color:#4f81bd" %)** General Commands**.
	963	+* (((
	964	+(% style="color:#4f81bd" %)** General Commands**.
	965	+)))
757	757
	967	+(((
758	758	These commands are to configure:
	969	+)))
759	759
760		-* General system settings like: uplink interval.
761		-* LoRaWAN protocol & radio related command.
	971	+* (((
	972	+General system settings like: uplink interval.
	973	+)))
	974	+* (((
	975	+LoRaWAN protocol & radio related command.
	976	+)))
762	762
	978	+(((
763	763	They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	980	+)))
764	764
	982	+(((
	983	+
	984	+)))
765	765
766		-* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
	986	+* (((
	987	+(% style="color:#4f81bd" %)** Commands special design for LSPH01**
	988	+)))
767	767
	990	+(((
768	768	These commands only valid for LSPH01, as below:
	992	+)))
769	769
770	770
771	771
...	...	@@ -778,17 +778,28 @@
778	778	[[image:image-20220607171554-8.png]]
779	779
780	780
781		-
	1005	+(((
782	782	(% style="color:#037691" %)**Downlink Command: 0x01**
	1007	+)))
783	783
	1009	+(((
784	784	Format: Command Code (0x01) followed by 3 bytes time value.
	1011	+)))
785	785
	1013	+(((
786	786	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	1015	+)))
787	787
788		-* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
789		-* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	1017	+* (((
	1018	+Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	1019	+)))
	1020	+* (((
	1021	+Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
790	790
791	791
	1024	+
	1025	+)))
	1026	+
792	792	== 3.2 Set Interrupt Mode ==
793	793
794	794	Feature, Set Interrupt mode for GPIO_EXIT.
...	...	@@ -795,23 +795,37 @@
795	795
796	796	(% style="color:#037691" %)**AT Command: AT+INTMOD**
797	797
798		-[[image:image-20220607171716-9.png]]
	1033	+[[image:image-20220610105907-1.png]]
799	799
800	800
	1036	+(((
801	801	(% style="color:#037691" %)**Downlink Command: 0x06**
	1038	+)))
802	802
	1040	+(((
803	803	Format: Command Code (0x06) followed by 3 bytes.
	1042	+)))
804	804
	1044	+(((
805	805	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
	1046	+)))
806	806
807		-* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
808		-* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1048	+* (((
	1049	+Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
	1050	+)))
	1051	+* (((
	1052	+Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1053	+)))
809	809
	1055	+(((
	1056	+
	1057	+)))
810	810
811	811
	1060	+
812	812	== 3.3 Calibrate Sensor ==
813	813
814		-Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
	1063	+Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
815	815
816	816
817	817
...	...	@@ -843,14 +843,14 @@
843	843
844	844	Version
845	845	)))|Sensor Type|Reserve|(((
846		-[[Message Type>>path:#H2.3.6MessageType]]
	1095	+[[Message Type>>||anchor="H2.3.6MessageType"]]
847	847	Always 0x02
848	848	)))
849	849
850		-**Software Type**: Always 0x03 for LSPH01
	1099	+(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LSPH01
851	851
852	852
853		-**Frequency Band**:
	1102	+(% style="color:#037691" %)**Frequency Band**:
854	854
855	855	*0x01: EU868
856	856
...	...	@@ -873,13 +873,13 @@
873	873	*0xa0: AS923-3
874	874
875	875
876		-**Sub-Band**: value 0x00 ~~ 0x08
	1125	+(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
877	877
878	878
879		-**Firmware Version**: 0x0100, Means: v1.0.0 version
	1128	+(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
880	880
881	881
882		-**Sensor Type**:
	1131	+(% style="color:#037691" %)**Sensor Type**:
883	883
884	884	0x01: LSE01
885	885
...	...	@@ -906,7 +906,7 @@
906	906	)))
907	907
908	908	(((
909		-The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
	1158	+The discharge curve is not linear so can't simply use percentage to show the battery level. Below is the battery performance.
910	910	)))
911	911
912	912	[[image:1654593587246-335.png]]
...	...	@@ -941,12 +941,12 @@
941	941	)))
942	942
943	943
944		-**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
	1193	+(% style="color:#037691" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
945	945
946	946	[[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
947	947
948	948
949		-**Step 2**: Open it and choose
	1198	+(% style="color:#037691" %)**Step 2**(%%): Open it and choose
950	950
951	951	* Product Model
952	952	* Uplink Interval
...	...	@@ -960,13 +960,13 @@
960	960	The battery related documents as below:
961	961
962	962	* (((
963		-[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
	1212	+[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
964	964	)))
965	965	* (((
966	966	[[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
967	967	)))
968	968	* (((
969		-[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
	1218	+[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
970	970	)))
971	971
972	972	[[image:image-20220607172042-11.png]]
...	...	@@ -983,9 +983,13 @@
983	983
984	984	=== ​4.3.2 Replace the battery ===
985	985
986		-You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
	1235	+(((
	1236	+You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
	1237	+)))
987	987
	1239	+(((
988	988	The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
	1241	+)))
989	989
990	990
991	991
...	...	@@ -1006,29 +1006,29 @@
1006	1006	(% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1007	1007
1008	1008
	1262	+(((
1009	1009	In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
	1264	+)))
1010	1010
1011	1011
1012	1012	[[image:1654593712276-618.png]]
1013	1013
1014		-Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
	1269	+Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1015	1015
1016	1016
1017		-
1018	1018	= 6. FAQ =
1019	1019
1020	1020	== 6.1 How to change the LoRa Frequency Bands/Region ==
1021	1021
1022		-You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
	1276	+You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1023	1023	When downloading the images, choose the required image file for download. ​
1024	1024
1025	1025
1026		-
1027	1027	= 7. Trouble Shooting =
1028	1028
1029		-== 7.1 AT Commands input doesn’t work ==
	1282	+== 7.1 AT Commands input doesn't work ==
1030	1030
1031		-In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
	1284	+In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1032	1032
1033	1033
1034	1034
...	...	@@ -1050,6 +1050,7 @@
1050	1050
1051	1051
1052	1052
	1306	+
1053	1053	= 9. ​Packing Info =
1054	1054
1055	1055
...	...	@@ -1066,6 +1066,7 @@
1066	1066
1067	1067
1068	1068
	1323	+
1069	1069	= 10. ​Support =
1070	1070
1071	1071	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

image-20220610105907-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+15.5 KB

Content