Changes for page LSPH01 -- LoRaWAN Soil pH Sensor User Manual

Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 1 added, 0 removed)
  • image-20220610105907-1.png

Details

Page properties

Content

...	...	@@ -4,7 +4,7 @@
4	4
5	5
6	6
7		-**Contents:**
	7	+**Table of Contents:**
8	8
9	9	* [[1. Introduction>>path:#H1.Introduction]]
10	10	** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
...	...	@@ -64,24 +64,31 @@
64	64
65	65
66	66
67		-
68		-
69		-
70		-
71		-
72	72	= 1. Introduction =
73	73
74	74	== 1.1 ​What is LoRaWAN Soil pH Sensor ==
75	75
	71	+(((
	72	+
	73	+
76	76	The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
	75	+)))
77	77
	77	+(((
78	78	LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
	79	+)))
79	79
	81	+(((
80	80	The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
	83	+)))
81	81
	85	+(((
82	82	LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
	87	+)))
83	83
	89	+(((
84	84	Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	91	+)))
85	85
86	86
87	87	[[image:1654592435432-887.png]]
...	...	@@ -88,6 +88,7 @@
88	88
89	89
90	90
	98	+
91	91	== ​1.2 Features ==
92	92
93	93	* LoRaWAN 1.0.3 Class A
...	...	@@ -119,6 +119,7 @@
119	119	* IP68 Protection
120	120	* Length: 3.5 meters
121	121
	130	+
122	122	(% style="color:#4f81bd" %)**Soil Temperature:**
123	123
124	124	* Range -40℃～85℃
...	...	@@ -127,10 +127,16 @@
127	127	* IP68 Protection
128	128	* Length: 3.5 meters
129	129
	139	+
	140	+
	141	+
130	130	== 1.4 ​Applications ==
131	131
132	132	* Smart Agriculture
133	133
	146	+
	147	+
	148	+
134	134	== 1.5 Pin mapping and power on ==
135	135
136	136	[[image:1654592472094-134.png]]
...	...	@@ -146,7 +146,7 @@
146	146	)))
147	147
148	148	(((
149		-In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
	164	+In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
150	150	)))
151	151
152	152
...	...	@@ -158,10 +158,14 @@
158	158
159	159	(((
160	160	[[image:1654592492399-921.png]]
	176	+
	177	+
161	161	)))
162	162
163	163	(((
164	164	The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
	182	+
	183	+
165	165	)))
166	166
167	167	(((
...	...	@@ -185,11 +185,13 @@
185	185	[[image:1654592600093-601.png]]
186	186
187	187
	207	+
188	188	**Add APP EUI and DEV EUI**
189	189
190	190	[[image:1654592619856-881.png]]
191	191
192	192
	213	+
193	193	**Add APP EUI in the application**
194	194
195	195	[[image:1654592632656-512.png]]
...	...	@@ -209,7 +209,9 @@
209	209	[[image:image-20220607170442-2.png]]
210	210
211	211
	233	+(((
212	212	(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	235	+)))
213	213
214	214	[[image:1654592697690-910.png]]
215	215
...	...	@@ -217,26 +217,30 @@
217	217
218	218	== 2.3 ​Uplink Payload ==
219	219
	243	+(((
220	220	LSPH01 will uplink payload via LoRaWAN with below payload format:
	245	+)))
221	221
	247	+(((
222	222	Uplink payload includes in total 11 bytes.
	249	+)))
223	223
	251	+(((
224	224	Normal uplink payload:
	253	+)))
225	225
226	226	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
227		-|(((
228		-**Size**
	256	+|=(% style="width: 62.5px;" %)(((
	257	+**Size (bytes)**
	258	+)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
	259	+|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
	260	+[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
229	229
230		-**(bytes)**
231		-)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
232		-|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
233		-[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
234		-
235		-[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
236		-)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
237		-[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
	262	+[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
	263	+)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
	264	+[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
238	238	)))|Reserve|(((
239		-[[Message Type>>path:#H2.3.6MessageType]]
	266	+[[Message Type>>||anchor="H2.3.6MessageType"]]
240	240	)))
241	241
242	242	[[image:1654592721645-318.png]]
...	...	@@ -292,7 +292,7 @@
292	292
293	293	=== 2.3.5 Interrupt Pin ===
294	294
295		-This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
	322	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
296	296
297	297
298	298	**Example:**
...	...	@@ -305,18 +305,24 @@
305	305
306	306	=== 2.3.6 Message Type ===
307	307
	335	+(((
308	308	For a normal uplink payload, the message type is always 0x01.
	337	+)))
309	309
	339	+(((
310	310	Valid Message Type:
	341	+)))
311	311
312	312
313		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
314		-|**Message Type Code**|**Description**|**Payload**
315		-|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
316		-|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
317		-|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
	344	+(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
	345	+|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
	346	+|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
	347	+|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
	348	+|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
318	318
319	319
	351	+
	352	+
320	320	=== 2.3.7 Decode payload in The Things Network ===
321	321
322	322	While using TTN network, you can add the payload format to decode the payload.
...	...	@@ -336,18 +336,27 @@
336	336
337	337	== 2.4 Uplink Interval ==
338	338
339		-The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
	372	+The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
340	340
341	341
342	342
343	343	== 2.5 ​Show Data in DataCake IoT Server ==
344	344
	378	+(((
345	345	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
	380	+)))
346	346
	382	+(((
	383	+
	384	+)))
347	347
	386	+(((
348	348	(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
	388	+)))
349	349
	390	+(((
350	350	(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
	392	+)))
351	351
352	352
353	353	[[image:1654592790040-760.png]]
...	...	@@ -370,9 +370,13 @@
370	370	[[image:1654592856403-259.png]]
371	371
372	372
	415	+(((
373	373	(% style="color:blue" %)**Step 5**(%%)**: add payload decode**
	417	+)))
374	374
	419	+(((
375	375	Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
	421	+)))
376	376
377	377
378	378	[[image:1654592878525-845.png]]
...	...	@@ -395,8 +395,10 @@
395	395	=== 2.6.1 Before measurement ===
396	396
397	397	(((
	444	+(((
398	398	If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.
399	399	)))
	447	+)))
400	400
401	401
402	402
...	...	@@ -403,24 +403,45 @@
403	403	=== 2.6.2 Measurement ===
404	404
405	405
	454	+(((
406	406	(% style="color:#4f81bd" %)**Measurement the soil surface:**
	456	+)))
407	407
	458	+(((
408	408	[[image:1654592946732-634.png]]
	460	+)))
409	409
	462	+(((
410	410	Choose the proper measuring position. Split the surface soil according to the measured deep.
	464	+)))
411	411
	466	+(((
412	412	Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
	468	+)))
413	413
	470	+(((
414	414	Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
	472	+)))
415	415
	474	+(((
416	416	Put soil over the probe after insert. And start to measure.
	476	+)))
417	417
	478	+(((
	479	+
	480	+)))
418	418
	482	+(((
419	419	(% style="color:#4f81bd" %)**Measurement inside soil:**
	484	+)))
420	420
	486	+(((
421	421	Dig a hole with diameter > 20CM.
	488	+)))
422	422
	490	+(((
423	423	Insert the probe inside, method like measure the surface.
	492	+)))
424	424
425	425
426	426
...	...	@@ -450,9 +450,13 @@
450	450
451	451	== 2.7 Calibration ==
452	452
	522	+(((
453	453	User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
	524	+)))
454	454
	526	+(((
455	455	After stable, user can use below command to calibrate.
	528	+)))
456	456
457	457	[[image:image-20220607171149-4.png]]
458	458
...	...	@@ -459,12 +459,10 @@
459	459
460	460	(% style="color:#037691" %)**Calibration Payload**
461	461
462		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
463		-|(((
464		-**Size**
465		-
466		-**(bytes)**
467		-)))|**1**|**1**|**1**|**7**|**1**
	535	+(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
	536	+|=(% style="width: 62.5px;" %)(((
	537	+**Size (bytes)**
	538	+)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
468	468	|**Value**|(((
469	469	PH4
470	470
...	...	@@ -474,7 +474,7 @@
474	474
475	475	Calibrate value
476	476	)))|Reserve|(((
477		-[[Message Type>>path:#H2.3.6MessageType]]
	548	+[[Message Type>>||anchor="H2.3.6MessageType"]]
478	478
479	479	Always 0x03
480	480	)))
...	...	@@ -497,32 +497,61 @@
497	497
498	498	=== 2.8.1 EU863-870 (EU868) ===
499	499
	571	+(((
500	500	(% style="color:blue" %)**Uplink:**
	573	+)))
501	501
	575	+(((
502	502	868.1 - SF7BW125 to SF12BW125
	577	+)))
503	503
	579	+(((
504	504	868.3 - SF7BW125 to SF12BW125 and SF7BW250
	581	+)))
505	505
	583	+(((
506	506	868.5 - SF7BW125 to SF12BW125
	585	+)))
507	507
	587	+(((
508	508	867.1 - SF7BW125 to SF12BW125
	589	+)))
509	509
	591	+(((
510	510	867.3 - SF7BW125 to SF12BW125
	593	+)))
511	511
	595	+(((
512	512	867.5 - SF7BW125 to SF12BW125
	597	+)))
513	513
	599	+(((
514	514	867.7 - SF7BW125 to SF12BW125
	601	+)))
515	515
	603	+(((
516	516	867.9 - SF7BW125 to SF12BW125
	605	+)))
517	517
	607	+(((
518	518	868.8 - FSK
	609	+)))
519	519
	611	+(((
	612	+
	613	+)))
520	520
	615	+(((
521	521	(% style="color:blue" %)**Downlink:**
	617	+)))
522	522
	619	+(((
523	523	Uplink channels 1-9 (RX1)
	621	+)))
524	524
	623	+(((
525	525	869.525 - SF9BW125 (RX2 downlink only)
	625	+)))
526	526
527	527
528	528
...	...	@@ -544,49 +544,91 @@
544	544	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
545	545
546	546
547		-
548	548	=== 2.8.3 CN470-510 (CN470) ===
549	549
	649	+(((
550	550	Used in China, Default use CHE=1
	651	+)))
551	551
	653	+(((
552	552	(% style="color:blue" %)**Uplink:**
	655	+)))
553	553
	657	+(((
554	554	486.3 - SF7BW125 to SF12BW125
	659	+)))
555	555
	661	+(((
556	556	486.5 - SF7BW125 to SF12BW125
	663	+)))
557	557
	665	+(((
558	558	486.7 - SF7BW125 to SF12BW125
	667	+)))
559	559
	669	+(((
560	560	486.9 - SF7BW125 to SF12BW125
	671	+)))
561	561
	673	+(((
562	562	487.1 - SF7BW125 to SF12BW125
	675	+)))
563	563
	677	+(((
564	564	487.3 - SF7BW125 to SF12BW125
	679	+)))
565	565
	681	+(((
566	566	487.5 - SF7BW125 to SF12BW125
	683	+)))
567	567
	685	+(((
568	568	487.7 - SF7BW125 to SF12BW125
	687	+)))
569	569
	689	+(((
	690	+
	691	+)))
570	570
	693	+(((
571	571	(% style="color:blue" %)**Downlink:**
	695	+)))
572	572
	697	+(((
573	573	506.7 - SF7BW125 to SF12BW125
	699	+)))
574	574
	701	+(((
575	575	506.9 - SF7BW125 to SF12BW125
	703	+)))
576	576
	705	+(((
577	577	507.1 - SF7BW125 to SF12BW125
	707	+)))
578	578
	709	+(((
579	579	507.3 - SF7BW125 to SF12BW125
	711	+)))
580	580
	713	+(((
581	581	507.5 - SF7BW125 to SF12BW125
	715	+)))
582	582
	717	+(((
583	583	507.7 - SF7BW125 to SF12BW125
	719	+)))
584	584
	721	+(((
585	585	507.9 - SF7BW125 to SF12BW125
	723	+)))
586	586
	725	+(((
587	587	508.1 - SF7BW125 to SF12BW125
	727	+)))
588	588
	729	+(((
589	589	505.3 - SF12BW125 (RX2 downlink only)
	731	+)))
590	590
591	591
592	592
...	...	@@ -611,112 +611,219 @@
611	611	* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
612	612	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
613	613
614		-
615		-
616	616	=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
617	617
	758	+(((
618	618	(% style="color:blue" %)**Default Uplink channel:**
	760	+)))
619	619
	762	+(((
620	620	923.2 - SF7BW125 to SF10BW125
	764	+)))
621	621
	766	+(((
622	622	923.4 - SF7BW125 to SF10BW125
	768	+)))
623	623
	770	+(((
	771	+
	772	+)))
624	624
	774	+(((
625	625	(% style="color:blue" %)**Additional Uplink Channel**:
	776	+)))
626	626
	778	+(((
627	627	(OTAA mode, channel added by JoinAccept message)
	780	+)))
628	628
	782	+(((
	783	+
	784	+)))
629	629
	786	+(((
630	630	(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
	788	+)))
631	631
	790	+(((
632	632	922.2 - SF7BW125 to SF10BW125
	792	+)))
633	633
	794	+(((
634	634	922.4 - SF7BW125 to SF10BW125
	796	+)))
635	635
	798	+(((
636	636	922.6 - SF7BW125 to SF10BW125
	800	+)))
637	637
	802	+(((
638	638	922.8 - SF7BW125 to SF10BW125
	804	+)))
639	639
	806	+(((
640	640	923.0 - SF7BW125 to SF10BW125
	808	+)))
641	641
	810	+(((
642	642	922.0 - SF7BW125 to SF10BW125
	812	+)))
643	643
	814	+(((
	815	+
	816	+)))
644	644
	818	+(((
645	645	(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
	820	+)))
646	646
	822	+(((
647	647	923.6 - SF7BW125 to SF10BW125
	824	+)))
648	648
	826	+(((
649	649	923.8 - SF7BW125 to SF10BW125
	828	+)))
650	650
	830	+(((
651	651	924.0 - SF7BW125 to SF10BW125
	832	+)))
652	652
	834	+(((
653	653	924.2 - SF7BW125 to SF10BW125
	836	+)))
654	654
	838	+(((
655	655	924.4 - SF7BW125 to SF10BW125
	840	+)))
656	656
	842	+(((
657	657	924.6 - SF7BW125 to SF10BW125
	844	+)))
658	658
	846	+(((
	847	+
	848	+)))
659	659
	850	+(((
660	660	(% style="color:blue" %)**Downlink:**
	852	+)))
661	661
	854	+(((
662	662	Uplink channels 1-8 (RX1)
	856	+)))
663	663
	858	+(((
664	664	923.2 - SF10BW125 (RX2)
	860	+)))
665	665
666	666
667	667
668	668	=== 2.8.6 KR920-923 (KR920) ===
669	669
	866	+(((
670	670	(% style="color:blue" %)**Default channel:**
	868	+)))
671	671
	870	+(((
672	672	922.1 - SF7BW125 to SF12BW125
	872	+)))
673	673
	874	+(((
674	674	922.3 - SF7BW125 to SF12BW125
	876	+)))
675	675
	878	+(((
676	676	922.5 - SF7BW125 to SF12BW125
	880	+)))
677	677
	882	+(((
	883	+
	884	+)))
678	678
	886	+(((
679	679	(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
	888	+)))
680	680
	890	+(((
681	681	922.1 - SF7BW125 to SF12BW125
	892	+)))
682	682
	894	+(((
683	683	922.3 - SF7BW125 to SF12BW125
	896	+)))
684	684
	898	+(((
685	685	922.5 - SF7BW125 to SF12BW125
	900	+)))
686	686
	902	+(((
687	687	922.7 - SF7BW125 to SF12BW125
	904	+)))
688	688
	906	+(((
689	689	922.9 - SF7BW125 to SF12BW125
	908	+)))
690	690
	910	+(((
691	691	923.1 - SF7BW125 to SF12BW125
	912	+)))
692	692
	914	+(((
693	693	923.3 - SF7BW125 to SF12BW125
	916	+)))
694	694
	918	+(((
	919	+
	920	+)))
695	695
	922	+(((
696	696	(% style="color:blue" %)**Downlink:**
	924	+)))
697	697
	926	+(((
698	698	Uplink channels 1-7(RX1)
	928	+)))
699	699
	930	+(((
700	700	921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
	932	+)))
701	701
702	702
703	703
704	704	=== 2.8.7 IN865-867 (IN865) ===
705	705
	938	+(((
706	706	(% style="color:blue" %)**Uplink:**
	940	+)))
707	707
	942	+(((
708	708	865.0625 - SF7BW125 to SF12BW125
	944	+)))
709	709
	946	+(((
710	710	865.4025 - SF7BW125 to SF12BW125
	948	+)))
711	711
	950	+(((
712	712	865.9850 - SF7BW125 to SF12BW125
	952	+)))
713	713
	954	+(((
	955	+
	956	+)))
714	714
	958	+(((
715	715	(% style="color:blue" %)**Downlink:**
	960	+)))
716	716
	962	+(((
717	717	Uplink channels 1-3 (RX1)
	964	+)))
718	718
	966	+(((
719	719	866.550 - SF10BW125 (RX2)
	968	+)))
720	720
721	721
722	722
...	...	@@ -727,8 +727,6 @@
727	727	* The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
728	728	* Blink once when device transmit a packet.
729	729
730		-
731		-
732	732	== 2.10 ​Firmware Change Log ==
733	733
734	734
...	...	@@ -743,26 +743,51 @@
743	743
744	744	= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
745	745
	993	+(((
746	746	Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
	995	+)))
747	747
748		-* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
749		-* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	997	+* (((
	998	+AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
	999	+)))
	1000	+* (((
	1001	+LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	1002	+)))
750	750
	1004	+(((
751	751	There are two kinds of commands to configure LSPH01, they are:
	1006	+)))
752	752
753		-* (% style="color:#4f81bd" %)** General Commands**.
	1008	+* (((
	1009	+(% style="color:#4f81bd" %)** General Commands**.
	1010	+)))
754	754
	1012	+(((
755	755	These commands are to configure:
	1014	+)))
756	756
757		-* General system settings like: uplink interval.
758		-* LoRaWAN protocol & radio related command.
	1016	+* (((
	1017	+General system settings like: uplink interval.
	1018	+)))
	1019	+* (((
	1020	+LoRaWAN protocol & radio related command.
	1021	+)))
759	759
	1023	+(((
760	760	They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	1025	+)))
761	761
	1027	+(((
	1028	+
	1029	+)))
762	762
763		-* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1031	+* (((
	1032	+(% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1033	+)))
764	764
	1035	+(((
765	765	These commands only valid for LSPH01, as below:
	1037	+)))
766	766
767	767
768	768
...	...	@@ -776,16 +776,28 @@
776	776
777	777
778	778
	1051	+(((
779	779	(% style="color:#037691" %)**Downlink Command: 0x01**
	1053	+)))
780	780
	1055	+(((
781	781	Format: Command Code (0x01) followed by 3 bytes time value.
	1057	+)))
782	782
	1059	+(((
783	783	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	1061	+)))
784	784
785		-* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
786		-* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	1063	+* (((
	1064	+Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	1065	+)))
	1066	+* (((
	1067	+Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
787	787
788	788
	1070	+
	1071	+)))
	1072	+
789	789	== 3.2 Set Interrupt Mode ==
790	790
791	791	Feature, Set Interrupt mode for GPIO_EXIT.
...	...	@@ -792,23 +792,37 @@
792	792
793	793	(% style="color:#037691" %)**AT Command: AT+INTMOD**
794	794
795		-[[image:image-20220607171716-9.png]]
	1079	+[[image:image-20220610105907-1.png]]
796	796
797	797
	1082	+(((
798	798	(% style="color:#037691" %)**Downlink Command: 0x06**
	1084	+)))
799	799
	1086	+(((
800	800	Format: Command Code (0x06) followed by 3 bytes.
	1088	+)))
801	801
	1090	+(((
802	802	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
	1092	+)))
803	803
804		-* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
805		-* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1094	+* (((
	1095	+Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
	1096	+)))
	1097	+* (((
	1098	+Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1099	+)))
806	806
	1101	+(((
	1102	+
	1103	+)))
807	807
808	808
	1106	+
809	809	== 3.3 Calibrate Sensor ==
810	810
811		-Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
	1109	+Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
812	812
813	813
814	814
...	...	@@ -840,7 +840,7 @@
840	840
841	841	Version
842	842	)))|Sensor Type|Reserve|(((
843		-[[Message Type>>path:#H2.3.6MessageType]]
	1141	+[[Message Type>>||anchor="H2.3.6MessageType"]]
844	844	Always 0x02
845	845	)))
846	846
...	...	@@ -980,9 +980,13 @@
980	980
981	981	=== ​4.3.2 Replace the battery ===
982	982
	1281	+(((
983	983	You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
	1283	+)))
984	984
	1285	+(((
985	985	The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
	1287	+)))
986	986
987	987
988	988
...	...	@@ -1003,24 +1003,24 @@
1003	1003	(% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1004	1004
1005	1005
	1308	+(((
1006	1006	In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
	1310	+)))
1007	1007
1008	1008
1009	1009	[[image:1654593712276-618.png]]
1010	1010
1011		-Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
	1315	+Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1012	1012
1013	1013
1014		-
1015	1015	= 6. FAQ =
1016	1016
1017	1017	== 6.1 How to change the LoRa Frequency Bands/Region ==
1018	1018
1019		-You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
	1322	+You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1020	1020	When downloading the images, choose the required image file for download. ​
1021	1021
1022	1022
1023		-
1024	1024	= 7. Trouble Shooting =
1025	1025
1026	1026	== 7.1 AT Commands input doesn’t work ==
...	...	@@ -1045,8 +1045,6 @@
1045	1045	* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1046	1046	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1047	1047
1048		-
1049		-
1050	1050	= 9. ​Packing Info =
1051	1051
1052	1052
...	...	@@ -1061,8 +1061,6 @@
1061	1061	* Package Size / pcs : cm
1062	1062	* Weight / pcs : g
1063	1063
1064		-
1065		-
1066	1066	= 10. ​Support =
1067	1067
1068	1068	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

image-20220610105907-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+15.5 KB

Content