Changes for page LSPH01 -- LoRaWAN Soil pH Sensor User Manual

Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 1 added, 0 removed)
  • image-20220610105907-1.png

Details

Page properties

Content

...	...	@@ -4,7 +4,7 @@
4	4
5	5
6	6
7		-**Contents:**
	7	+**Table of Contents:**
8	8
9	9	* [[1. Introduction>>path:#H1.Introduction]]
10	10	** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
...	...	@@ -64,24 +64,31 @@
64	64
65	65
66	66
67		-
68		-
69		-
70		-
71		-
72	72	= 1. Introduction =
73	73
74	74	== 1.1 ​What is LoRaWAN Soil pH Sensor ==
75	75
	71	+(((
	72	+
	73	+
76	76	The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
	75	+)))
77	77
	77	+(((
78	78	LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
	79	+)))
79	79
	81	+(((
80	80	The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
	83	+)))
81	81
	85	+(((
82	82	LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
	87	+)))
83	83
	89	+(((
84	84	Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	91	+)))
85	85
86	86
87	87	[[image:1654592435432-887.png]]
...	...	@@ -88,6 +88,7 @@
88	88
89	89
90	90
	98	+
91	91	== ​1.2 Features ==
92	92
93	93	* LoRaWAN 1.0.3 Class A
...	...	@@ -119,6 +119,7 @@
119	119	* IP68 Protection
120	120	* Length: 3.5 meters
121	121
	130	+
122	122	(% style="color:#4f81bd" %)**Soil Temperature:**
123	123
124	124	* Range -40℃～85℃
...	...	@@ -127,10 +127,16 @@
127	127	* IP68 Protection
128	128	* Length: 3.5 meters
129	129
	139	+
	140	+
	141	+
130	130	== 1.4 ​Applications ==
131	131
132	132	* Smart Agriculture
133	133
	146	+
	147	+
	148	+
134	134	== 1.5 Pin mapping and power on ==
135	135
136	136	[[image:1654592472094-134.png]]
...	...	@@ -146,7 +146,7 @@
146	146	)))
147	147
148	148	(((
149		-In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
	164	+In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
150	150	)))
151	151
152	152
...	...	@@ -209,7 +209,9 @@
209	209	[[image:image-20220607170442-2.png]]
210	210
211	211
	227	+(((
212	212	(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	229	+)))
213	213
214	214	[[image:1654592697690-910.png]]
215	215
...	...	@@ -217,26 +217,30 @@
217	217
218	218	== 2.3 ​Uplink Payload ==
219	219
	237	+(((
220	220	LSPH01 will uplink payload via LoRaWAN with below payload format:
	239	+)))
221	221
	241	+(((
222	222	Uplink payload includes in total 11 bytes.
	243	+)))
223	223
	245	+(((
224	224	Normal uplink payload:
	247	+)))
225	225
226	226	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
227		-|(((
228		-**Size**
	250	+|=(% style="width: 62.5px;" %)(((
	251	+**Size (bytes)**
	252	+)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
	253	+|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
	254	+[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
229	229
230		-**(bytes)**
231		-)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
232		-|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
233		-[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
234		-
235		-[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
236		-)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
237		-[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
	256	+[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
	257	+)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
	258	+[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
238	238	)))|Reserve|(((
239		-[[Message Type>>path:#H2.3.6MessageType]]
	260	+[[Message Type>>||anchor="H2.3.6MessageType"]]
240	240	)))
241	241
242	242	[[image:1654592721645-318.png]]
...	...	@@ -292,7 +292,7 @@
292	292
293	293	=== 2.3.5 Interrupt Pin ===
294	294
295		-This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
	316	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
296	296
297	297
298	298	**Example:**
...	...	@@ -305,18 +305,21 @@
305	305
306	306	=== 2.3.6 Message Type ===
307	307
	329	+(((
308	308	For a normal uplink payload, the message type is always 0x01.
	331	+)))
309	309
	333	+(((
310	310	Valid Message Type:
	335	+)))
311	311
312	312
313		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
314		-|**Message Type Code**|**Description**|**Payload**
315		-|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
316		-|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
317		-|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
	338	+(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
	339	+|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
	340	+|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
	341	+|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
	342	+|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
318	318
319		-
320	320	=== 2.3.7 Decode payload in The Things Network ===
321	321
322	322	While using TTN network, you can add the payload format to decode the payload.
...	...	@@ -336,18 +336,27 @@
336	336
337	337	== 2.4 Uplink Interval ==
338	338
339		-The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
	363	+The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
340	340
341	341
342	342
343	343	== 2.5 ​Show Data in DataCake IoT Server ==
344	344
	369	+(((
345	345	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
	371	+)))
346	346
	373	+(((
	374	+
	375	+)))
347	347
	377	+(((
348	348	(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
	379	+)))
349	349
	381	+(((
350	350	(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
	383	+)))
351	351
352	352
353	353	[[image:1654592790040-760.png]]
...	...	@@ -370,9 +370,13 @@
370	370	[[image:1654592856403-259.png]]
371	371
372	372
	406	+(((
373	373	(% style="color:blue" %)**Step 5**(%%)**: add payload decode**
	408	+)))
374	374
	410	+(((
375	375	Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
	412	+)))
376	376
377	377
378	378	[[image:1654592878525-845.png]]
...	...	@@ -395,8 +395,10 @@
395	395	=== 2.6.1 Before measurement ===
396	396
397	397	(((
	435	+(((
398	398	If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.
399	399	)))
	438	+)))
400	400
401	401
402	402
...	...	@@ -403,24 +403,45 @@
403	403	=== 2.6.2 Measurement ===
404	404
405	405
	445	+(((
406	406	(% style="color:#4f81bd" %)**Measurement the soil surface:**
	447	+)))
407	407
	449	+(((
408	408	[[image:1654592946732-634.png]]
	451	+)))
409	409
	453	+(((
410	410	Choose the proper measuring position. Split the surface soil according to the measured deep.
	455	+)))
411	411
	457	+(((
412	412	Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
	459	+)))
413	413
	461	+(((
414	414	Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
	463	+)))
415	415
	465	+(((
416	416	Put soil over the probe after insert. And start to measure.
	467	+)))
417	417
	469	+(((
	470	+
	471	+)))
418	418
	473	+(((
419	419	(% style="color:#4f81bd" %)**Measurement inside soil:**
	475	+)))
420	420
	477	+(((
421	421	Dig a hole with diameter > 20CM.
	479	+)))
422	422
	481	+(((
423	423	Insert the probe inside, method like measure the surface.
	483	+)))
424	424
425	425
426	426
...	...	@@ -450,9 +450,13 @@
450	450
451	451	== 2.7 Calibration ==
452	452
	513	+(((
453	453	User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
	515	+)))
454	454
	517	+(((
455	455	After stable, user can use below command to calibrate.
	519	+)))
456	456
457	457	[[image:image-20220607171149-4.png]]
458	458
...	...	@@ -459,12 +459,10 @@
459	459
460	460	(% style="color:#037691" %)**Calibration Payload**
461	461
462		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
463		-|(((
464		-**Size**
465		-
466		-**(bytes)**
467		-)))|**1**|**1**|**1**|**7**|**1**
	526	+(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
	527	+|=(% style="width: 62.5px;" %)(((
	528	+**Size (bytes)**
	529	+)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
468	468	|**Value**|(((
469	469	PH4
470	470
...	...	@@ -474,7 +474,7 @@
474	474
475	475	Calibrate value
476	476	)))|Reserve|(((
477		-[[Message Type>>path:#H2.3.6MessageType]]
	539	+[[Message Type>>||anchor="H2.3.6MessageType"]]
478	478
479	479	Always 0x03
480	480	)))
...	...	@@ -497,32 +497,61 @@
497	497
498	498	=== 2.8.1 EU863-870 (EU868) ===
499	499
	562	+(((
500	500	(% style="color:blue" %)**Uplink:**
	564	+)))
501	501
	566	+(((
502	502	868.1 - SF7BW125 to SF12BW125
	568	+)))
503	503
	570	+(((
504	504	868.3 - SF7BW125 to SF12BW125 and SF7BW250
	572	+)))
505	505
	574	+(((
506	506	868.5 - SF7BW125 to SF12BW125
	576	+)))
507	507
	578	+(((
508	508	867.1 - SF7BW125 to SF12BW125
	580	+)))
509	509
	582	+(((
510	510	867.3 - SF7BW125 to SF12BW125
	584	+)))
511	511
	586	+(((
512	512	867.5 - SF7BW125 to SF12BW125
	588	+)))
513	513
	590	+(((
514	514	867.7 - SF7BW125 to SF12BW125
	592	+)))
515	515
	594	+(((
516	516	867.9 - SF7BW125 to SF12BW125
	596	+)))
517	517
	598	+(((
518	518	868.8 - FSK
	600	+)))
519	519
	602	+(((
	603	+
	604	+)))
520	520
	606	+(((
521	521	(% style="color:blue" %)**Downlink:**
	608	+)))
522	522
	610	+(((
523	523	Uplink channels 1-9 (RX1)
	612	+)))
524	524
	614	+(((
525	525	869.525 - SF9BW125 (RX2 downlink only)
	616	+)))
526	526
527	527
528	528
...	...	@@ -544,49 +544,91 @@
544	544	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
545	545
546	546
547		-
548	548	=== 2.8.3 CN470-510 (CN470) ===
549	549
	640	+(((
550	550	Used in China, Default use CHE=1
	642	+)))
551	551
	644	+(((
552	552	(% style="color:blue" %)**Uplink:**
	646	+)))
553	553
	648	+(((
554	554	486.3 - SF7BW125 to SF12BW125
	650	+)))
555	555
	652	+(((
556	556	486.5 - SF7BW125 to SF12BW125
	654	+)))
557	557
	656	+(((
558	558	486.7 - SF7BW125 to SF12BW125
	658	+)))
559	559
	660	+(((
560	560	486.9 - SF7BW125 to SF12BW125
	662	+)))
561	561
	664	+(((
562	562	487.1 - SF7BW125 to SF12BW125
	666	+)))
563	563
	668	+(((
564	564	487.3 - SF7BW125 to SF12BW125
	670	+)))
565	565
	672	+(((
566	566	487.5 - SF7BW125 to SF12BW125
	674	+)))
567	567
	676	+(((
568	568	487.7 - SF7BW125 to SF12BW125
	678	+)))
569	569
	680	+(((
	681	+
	682	+)))
570	570
	684	+(((
571	571	(% style="color:blue" %)**Downlink:**
	686	+)))
572	572
	688	+(((
573	573	506.7 - SF7BW125 to SF12BW125
	690	+)))
574	574
	692	+(((
575	575	506.9 - SF7BW125 to SF12BW125
	694	+)))
576	576
	696	+(((
577	577	507.1 - SF7BW125 to SF12BW125
	698	+)))
578	578
	700	+(((
579	579	507.3 - SF7BW125 to SF12BW125
	702	+)))
580	580
	704	+(((
581	581	507.5 - SF7BW125 to SF12BW125
	706	+)))
582	582
	708	+(((
583	583	507.7 - SF7BW125 to SF12BW125
	710	+)))
584	584
	712	+(((
585	585	507.9 - SF7BW125 to SF12BW125
	714	+)))
586	586
	716	+(((
587	587	508.1 - SF7BW125 to SF12BW125
	718	+)))
588	588
	720	+(((
589	589	505.3 - SF12BW125 (RX2 downlink only)
	722	+)))
590	590
591	591
592	592
...	...	@@ -611,112 +611,219 @@
611	611	* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
612	612	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
613	613
614		-
615		-
616	616	=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
617	617
	749	+(((
618	618	(% style="color:blue" %)**Default Uplink channel:**
	751	+)))
619	619
	753	+(((
620	620	923.2 - SF7BW125 to SF10BW125
	755	+)))
621	621
	757	+(((
622	622	923.4 - SF7BW125 to SF10BW125
	759	+)))
623	623
	761	+(((
	762	+
	763	+)))
624	624
	765	+(((
625	625	(% style="color:blue" %)**Additional Uplink Channel**:
	767	+)))
626	626
	769	+(((
627	627	(OTAA mode, channel added by JoinAccept message)
	771	+)))
628	628
	773	+(((
	774	+
	775	+)))
629	629
	777	+(((
630	630	(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
	779	+)))
631	631
	781	+(((
632	632	922.2 - SF7BW125 to SF10BW125
	783	+)))
633	633
	785	+(((
634	634	922.4 - SF7BW125 to SF10BW125
	787	+)))
635	635
	789	+(((
636	636	922.6 - SF7BW125 to SF10BW125
	791	+)))
637	637
	793	+(((
638	638	922.8 - SF7BW125 to SF10BW125
	795	+)))
639	639
	797	+(((
640	640	923.0 - SF7BW125 to SF10BW125
	799	+)))
641	641
	801	+(((
642	642	922.0 - SF7BW125 to SF10BW125
	803	+)))
643	643
	805	+(((
	806	+
	807	+)))
644	644
	809	+(((
645	645	(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
	811	+)))
646	646
	813	+(((
647	647	923.6 - SF7BW125 to SF10BW125
	815	+)))
648	648
	817	+(((
649	649	923.8 - SF7BW125 to SF10BW125
	819	+)))
650	650
	821	+(((
651	651	924.0 - SF7BW125 to SF10BW125
	823	+)))
652	652
	825	+(((
653	653	924.2 - SF7BW125 to SF10BW125
	827	+)))
654	654
	829	+(((
655	655	924.4 - SF7BW125 to SF10BW125
	831	+)))
656	656
	833	+(((
657	657	924.6 - SF7BW125 to SF10BW125
	835	+)))
658	658
	837	+(((
	838	+
	839	+)))
659	659
	841	+(((
660	660	(% style="color:blue" %)**Downlink:**
	843	+)))
661	661
	845	+(((
662	662	Uplink channels 1-8 (RX1)
	847	+)))
663	663
	849	+(((
664	664	923.2 - SF10BW125 (RX2)
	851	+)))
665	665
666	666
667	667
668	668	=== 2.8.6 KR920-923 (KR920) ===
669	669
	857	+(((
670	670	(% style="color:blue" %)**Default channel:**
	859	+)))
671	671
	861	+(((
672	672	922.1 - SF7BW125 to SF12BW125
	863	+)))
673	673
	865	+(((
674	674	922.3 - SF7BW125 to SF12BW125
	867	+)))
675	675
	869	+(((
676	676	922.5 - SF7BW125 to SF12BW125
	871	+)))
677	677
	873	+(((
	874	+
	875	+)))
678	678
	877	+(((
679	679	(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
	879	+)))
680	680
	881	+(((
681	681	922.1 - SF7BW125 to SF12BW125
	883	+)))
682	682
	885	+(((
683	683	922.3 - SF7BW125 to SF12BW125
	887	+)))
684	684
	889	+(((
685	685	922.5 - SF7BW125 to SF12BW125
	891	+)))
686	686
	893	+(((
687	687	922.7 - SF7BW125 to SF12BW125
	895	+)))
688	688
	897	+(((
689	689	922.9 - SF7BW125 to SF12BW125
	899	+)))
690	690
	901	+(((
691	691	923.1 - SF7BW125 to SF12BW125
	903	+)))
692	692
	905	+(((
693	693	923.3 - SF7BW125 to SF12BW125
	907	+)))
694	694
	909	+(((
	910	+
	911	+)))
695	695
	913	+(((
696	696	(% style="color:blue" %)**Downlink:**
	915	+)))
697	697
	917	+(((
698	698	Uplink channels 1-7(RX1)
	919	+)))
699	699
	921	+(((
700	700	921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
	923	+)))
701	701
702	702
703	703
704	704	=== 2.8.7 IN865-867 (IN865) ===
705	705
	929	+(((
706	706	(% style="color:blue" %)**Uplink:**
	931	+)))
707	707
	933	+(((
708	708	865.0625 - SF7BW125 to SF12BW125
	935	+)))
709	709
	937	+(((
710	710	865.4025 - SF7BW125 to SF12BW125
	939	+)))
711	711
	941	+(((
712	712	865.9850 - SF7BW125 to SF12BW125
	943	+)))
713	713
	945	+(((
	946	+
	947	+)))
714	714
	949	+(((
715	715	(% style="color:blue" %)**Downlink:**
	951	+)))
716	716
	953	+(((
717	717	Uplink channels 1-3 (RX1)
	955	+)))
718	718
	957	+(((
719	719	866.550 - SF10BW125 (RX2)
	959	+)))
720	720
721	721
722	722
...	...	@@ -727,8 +727,6 @@
727	727	* The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
728	728	* Blink once when device transmit a packet.
729	729
730		-
731		-
732	732	== 2.10 ​Firmware Change Log ==
733	733
734	734
...	...	@@ -743,26 +743,51 @@
743	743
744	744	= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
745	745
	984	+(((
746	746	Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
	986	+)))
747	747
748		-* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
749		-* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	988	+* (((
	989	+AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
	990	+)))
	991	+* (((
	992	+LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	993	+)))
750	750
	995	+(((
751	751	There are two kinds of commands to configure LSPH01, they are:
	997	+)))
752	752
753		-* (% style="color:#4f81bd" %)** General Commands**.
	999	+* (((
	1000	+(% style="color:#4f81bd" %)** General Commands**.
	1001	+)))
754	754
	1003	+(((
755	755	These commands are to configure:
	1005	+)))
756	756
757		-* General system settings like: uplink interval.
758		-* LoRaWAN protocol & radio related command.
	1007	+* (((
	1008	+General system settings like: uplink interval.
	1009	+)))
	1010	+* (((
	1011	+LoRaWAN protocol & radio related command.
	1012	+)))
759	759
	1014	+(((
760	760	They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	1016	+)))
761	761
	1018	+(((
	1019	+
	1020	+)))
762	762
763		-* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1022	+* (((
	1023	+(% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1024	+)))
764	764
	1026	+(((
765	765	These commands only valid for LSPH01, as below:
	1028	+)))
766	766
767	767
768	768
...	...	@@ -776,16 +776,28 @@
776	776
777	777
778	778
	1042	+(((
779	779	(% style="color:#037691" %)**Downlink Command: 0x01**
	1044	+)))
780	780
	1046	+(((
781	781	Format: Command Code (0x01) followed by 3 bytes time value.
	1048	+)))
782	782
	1050	+(((
783	783	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	1052	+)))
784	784
785		-* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
786		-* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	1054	+* (((
	1055	+Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	1056	+)))
	1057	+* (((
	1058	+Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
787	787
788	788
	1061	+
	1062	+)))
	1063	+
789	789	== 3.2 Set Interrupt Mode ==
790	790
791	791	Feature, Set Interrupt mode for GPIO_EXIT.
...	...	@@ -792,23 +792,37 @@
792	792
793	793	(% style="color:#037691" %)**AT Command: AT+INTMOD**
794	794
795		-[[image:image-20220607171716-9.png]]
	1070	+[[image:image-20220610105907-1.png]]
796	796
797	797
	1073	+(((
798	798	(% style="color:#037691" %)**Downlink Command: 0x06**
	1075	+)))
799	799
	1077	+(((
800	800	Format: Command Code (0x06) followed by 3 bytes.
	1079	+)))
801	801
	1081	+(((
802	802	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
	1083	+)))
803	803
804		-* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
805		-* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1085	+* (((
	1086	+Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
	1087	+)))
	1088	+* (((
	1089	+Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1090	+)))
806	806
	1092	+(((
	1093	+
	1094	+)))
807	807
808	808
	1097	+
809	809	== 3.3 Calibrate Sensor ==
810	810
811		-Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
	1100	+Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
812	812
813	813
814	814
...	...	@@ -840,7 +840,7 @@
840	840
841	841	Version
842	842	)))|Sensor Type|Reserve|(((
843		-[[Message Type>>path:#H2.3.6MessageType]]
	1132	+[[Message Type>>||anchor="H2.3.6MessageType"]]
844	844	Always 0x02
845	845	)))
846	846
...	...	@@ -980,9 +980,13 @@
980	980
981	981	=== ​4.3.2 Replace the battery ===
982	982
	1272	+(((
983	983	You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
	1274	+)))
984	984
	1276	+(((
985	985	The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
	1278	+)))
986	986
987	987
988	988
...	...	@@ -1003,24 +1003,24 @@
1003	1003	(% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1004	1004
1005	1005
	1299	+(((
1006	1006	In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
	1301	+)))
1007	1007
1008	1008
1009	1009	[[image:1654593712276-618.png]]
1010	1010
1011		-Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
	1306	+Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1012	1012
1013	1013
1014		-
1015	1015	= 6. FAQ =
1016	1016
1017	1017	== 6.1 How to change the LoRa Frequency Bands/Region ==
1018	1018
1019		-You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
	1313	+You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1020	1020	When downloading the images, choose the required image file for download. ​
1021	1021
1022	1022
1023		-
1024	1024	= 7. Trouble Shooting =
1025	1025
1026	1026	== 7.1 AT Commands input doesn’t work ==
...	...	@@ -1045,8 +1045,6 @@
1045	1045	* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1046	1046	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1047	1047
1048		-
1049		-
1050	1050	= 9. ​Packing Info =
1051	1051
1052	1052
...	...	@@ -1061,8 +1061,6 @@
1061	1061	* Package Size / pcs : cm
1062	1062	* Weight / pcs : g
1063	1063
1064		-
1065		-
1066	1066	= 10. ​Support =
1067	1067
1068	1068	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

image-20220610105907-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+15.5 KB

Content