Last modified by Xiaoling on 2025/04/25 14:08

From version 73.15
edited by Xiaoling
on 2022/06/07 17:41
Change comment: There is no comment for this version
To version 98.12
edited by Xiaoling
on 2022/10/13 17:14
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -4,63 +4,10 @@
4 4  
5 5  
6 6  
7 -**Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
8 +**Table of Contents:**
63 63  
10 +{{toc/}}
64 64  
65 65  
66 66  
... ... @@ -67,12 +67,14 @@
67 67  
68 68  
69 69  
70 -
71 71  = 1. Introduction =
72 72  
19 +
73 73  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
74 74  
75 75  (((
23 +
24 +
76 76  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
77 77  )))
78 78  
... ... @@ -99,6 +99,7 @@
99 99  
100 100  == ​1.2 Features ==
101 101  
51 +
102 102  * LoRaWAN 1.0.3 Class A
103 103  * Ultra-low power consumption
104 104  * Monitor soil pH with temperature compensation.
... ... @@ -115,6 +115,7 @@
115 115  
116 116  
117 117  
68 +
118 118  == 1.3 Probe Specification ==
119 119  
120 120  
... ... @@ -137,8 +137,10 @@
137 137  
138 138  
139 139  
91 +
140 140  == 1.4 ​Applications ==
141 141  
94 +
142 142  * Smart Agriculture
143 143  
144 144  
... ... @@ -145,6 +145,7 @@
145 145  
146 146  == 1.5 Pin mapping and power on ==
147 147  
101 +
148 148  [[image:1654592472094-134.png]]
149 149  
150 150  
... ... @@ -151,19 +151,23 @@
151 151  
152 152  = 2. Configure LSPH01 to connect to LoRaWAN network =
153 153  
108 +
154 154  == 2.1 How it works ==
155 155  
111 +
156 156  (((
157 157  The LSPH01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSPH01. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
158 158  )))
159 159  
160 160  (((
161 -In case you cant set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
117 +In case you can't set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
162 162  )))
163 163  
164 164  
121 +
165 165  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
166 166  
124 +
167 167  (((
168 168  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.
169 169  )))
... ... @@ -170,10 +170,14 @@
170 170  
171 171  (((
172 172  [[image:1654592492399-921.png]]
131 +
132 +
173 173  )))
174 174  
175 175  (((
176 176  The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
137 +
138 +
177 177  )))
178 178  
179 179  (((
... ... @@ -197,11 +197,13 @@
197 197  [[image:1654592600093-601.png]]
198 198  
199 199  
162 +
200 200  **Add APP EUI and DEV EUI**
201 201  
202 202  [[image:1654592619856-881.png]]
203 203  
204 204  
168 +
205 205  **Add APP EUI in the application**
206 206  
207 207  [[image:1654592632656-512.png]]
... ... @@ -223,6 +223,8 @@
223 223  
224 224  (((
225 225  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
190 +
191 +
226 226  )))
227 227  
228 228  [[image:1654592697690-910.png]]
... ... @@ -231,6 +231,7 @@
231 231  
232 232  == 2.3 ​Uplink Payload ==
233 233  
200 +
234 234  (((
235 235  LSPH01 will uplink payload via LoRaWAN with below payload format: 
236 236  )))
... ... @@ -244,19 +244,17 @@
244 244  )))
245 245  
246 246  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
247 -|(((
248 -**Size**
214 +|=(% style="width: 62.5px;" %)(((
215 +**Size (bytes)**
216 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
217 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
218 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
249 249  
250 -**(bytes)**
251 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
252 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
253 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
254 -
255 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
256 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
257 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
220 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
221 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
222 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
258 258  )))|Reserve|(((
259 -[[Message Type>>path:#H2.3.6MessageType]]
224 +[[Message Type>>||anchor="H2.3.6MessageType"]]
260 260  )))
261 261  
262 262  [[image:1654592721645-318.png]]
... ... @@ -276,6 +276,7 @@
276 276  
277 277  === 2.3.2 DS18B20 Temperature sensor ===
278 278  
244 +
279 279  This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.
280 280  
281 281  
... ... @@ -289,6 +289,7 @@
289 289  
290 290  === 2.3.3 Soil pH ===
291 291  
258 +
292 292  Range: 0 ~~ 14 pH
293 293  
294 294  **Example:**
... ... @@ -299,6 +299,7 @@
299 299  
300 300  === 2.3.4 Soil Temperature ===
301 301  
269 +
302 302  Get Soil Temperature 
303 303  
304 304  
... ... @@ -312,9 +312,10 @@
312 312  
313 313  === 2.3.5 Interrupt Pin ===
314 314  
315 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
316 316  
284 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
317 317  
286 +
318 318  **Example:**
319 319  
320 320  0x00: Normal uplink packet.
... ... @@ -325,6 +325,7 @@
325 325  
326 326  === 2.3.6 Message Type ===
327 327  
297 +
328 328  (((
329 329  For a normal uplink payload, the message type is always 0x01.
330 330  )))
... ... @@ -334,11 +334,11 @@
334 334  )))
335 335  
336 336  
337 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
338 -|**Message Type Code**|**Description**|**Payload**
339 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
340 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
341 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
307 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
308 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
309 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
310 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
311 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
342 342  
343 343  
344 344  
... ... @@ -355,7 +355,7 @@
355 355  )))
356 356  
357 357  (((
358 -LSPH01 TTN Payload Decoder: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
328 +LSPH01 TTN Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
359 359  )))
360 360  
361 361  
... ... @@ -362,18 +362,29 @@
362 362  
363 363  == 2.4 Uplink Interval ==
364 364  
365 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
366 366  
336 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
367 367  
368 368  
339 +
369 369  == 2.5 ​Show Data in DataCake IoT Server ==
370 370  
342 +
343 +(((
371 371  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
345 +)))
372 372  
347 +(((
348 +
349 +)))
373 373  
351 +(((
374 374  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
353 +)))
375 375  
355 +(((
376 376  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
357 +)))
377 377  
378 378  
379 379  [[image:1654592790040-760.png]]
... ... @@ -396,9 +396,13 @@
396 396  [[image:1654592856403-259.png]]
397 397  
398 398  
380 +(((
399 399  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
382 +)))
400 400  
401 -Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
384 +(((
385 +Download Datacake decoder from: [[https:~~/~~/www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0>>url:https://www.dropbox.com/sh/pj7cgmgqg3gx3ta/AABYFbg1DVOOR9Hmr1mLSBkga?dl=0]]
386 +)))
402 402  
403 403  
404 404  [[image:1654592878525-845.png]]
... ... @@ -418,11 +418,15 @@
418 418  
419 419  == 2.6 Installation and Maintain ==
420 420  
406 +
421 421  === 2.6.1 Before measurement ===
422 422  
409 +
423 423  (((
411 +(((
424 424  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
425 425  )))
414 +)))
426 426  
427 427  
428 428  
... ... @@ -429,29 +429,53 @@
429 429  === 2.6.2 Measurement ===
430 430  
431 431  
421 +(((
432 432  (% style="color:#4f81bd" %)**Measurement the soil surface:**
423 +)))
433 433  
425 +(((
434 434  [[image:1654592946732-634.png]]
435 435  
428 +
429 +)))
430 +
431 +(((
436 436  Choose the proper measuring position. Split the surface soil according to the measured deep.
433 +)))
437 437  
435 +(((
438 438  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
437 +)))
439 439  
440 -Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
439 +(((
440 +Slowly insert the probe to the measure point. Don't use large force which will break the probe. Make sure not shake when inserting.
441 +)))
441 441  
443 +(((
442 442  Put soil over the probe after insert. And start to measure.
445 +)))
443 443  
447 +(((
448 +
449 +)))
444 444  
451 +(((
445 445  (% style="color:#4f81bd" %)**Measurement inside soil:**
453 +)))
446 446  
455 +(((
447 447  Dig a hole with diameter > 20CM.
457 +)))
448 448  
459 +(((
449 449  Insert the probe inside, method like measure the surface.
461 +)))
450 450  
451 451  
452 452  
453 453  === 2.6.3 Maintain Probe ===
454 454  
467 +
455 455  1. (((
456 456  pH probe electrode is fragile and no strong. User must avoid strong force or hitting it.
457 457  )))
... ... @@ -476,9 +476,14 @@
476 476  
477 477  == 2.7 Calibration ==
478 478  
492 +
493 +(((
479 479  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
495 +)))
480 480  
497 +(((
481 481  After stable, user can use below command to calibrate.
499 +)))
482 482  
483 483  [[image:image-20220607171149-4.png]]
484 484  
... ... @@ -485,12 +485,10 @@
485 485  
486 486  (% style="color:#037691" %)**Calibration Payload**
487 487  
488 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
489 -|(((
490 -**Size**
491 -
492 -**(bytes)**
493 -)))|**1**|**1**|**1**|**7**|**1**
506 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
507 +|=(% style="width: 62.5px;" %)(((
508 +**Size (bytes)**
509 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
494 494  |**Value**|(((
495 495  PH4
496 496  
... ... @@ -500,7 +500,7 @@
500 500  
501 501  Calibrate value
502 502  )))|Reserve|(((
503 -[[Message Type>>path:#H2.3.6MessageType]]
519 +[[Message Type>>||anchor="H2.3.6MessageType"]]
504 504  
505 505  Always 0x03
506 506  )))
... ... @@ -515,47 +515,79 @@
515 515  
516 516  
517 517  
518 -
519 519  == 2.8 Frequency Plans ==
520 520  
536 +
521 521  (((
522 522  The LSPH01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
523 523  )))
524 524  
525 525  
542 +
526 526  === 2.8.1 EU863-870 (EU868) ===
527 527  
545 +
546 +(((
528 528  (% style="color:blue" %)**Uplink:**
548 +)))
529 529  
550 +(((
530 530  868.1 - SF7BW125 to SF12BW125
552 +)))
531 531  
554 +(((
532 532  868.3 - SF7BW125 to SF12BW125 and SF7BW250
556 +)))
533 533  
558 +(((
534 534  868.5 - SF7BW125 to SF12BW125
560 +)))
535 535  
562 +(((
536 536  867.1 - SF7BW125 to SF12BW125
564 +)))
537 537  
566 +(((
538 538  867.3 - SF7BW125 to SF12BW125
568 +)))
539 539  
570 +(((
540 540  867.5 - SF7BW125 to SF12BW125
572 +)))
541 541  
574 +(((
542 542  867.7 - SF7BW125 to SF12BW125
576 +)))
543 543  
578 +(((
544 544  867.9 - SF7BW125 to SF12BW125
580 +)))
545 545  
582 +(((
546 546  868.8 - FSK
584 +)))
547 547  
586 +(((
587 +
588 +)))
548 548  
590 +(((
549 549  (% style="color:blue" %)**Downlink:**
592 +)))
550 550  
594 +(((
551 551  Uplink channels 1-9 (RX1)
596 +)))
552 552  
598 +(((
553 553  869.525 - SF9BW125 (RX2 downlink only)
600 +)))
554 554  
555 555  
556 556  
557 557  === 2.8.2 US902-928(US915) ===
558 558  
606 +
559 559  (((
560 560  Used in USA, Canada and South America. Frequency band as per definition in LoRaWAN 1.0.3 Regional document.
561 561  )))
... ... @@ -569,56 +569,103 @@
569 569  )))
570 570  
571 571  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
572 -* Use the Join successful sub-band if the server doesnt include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
620 +* Use the Join successful sub-band if the server doesn't include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
573 573  
574 574  
623 +
624 +
575 575  === 2.8.3 CN470-510 (CN470) ===
576 576  
627 +
628 +(((
577 577  Used in China, Default use CHE=1
630 +)))
578 578  
632 +(((
579 579  (% style="color:blue" %)**Uplink:**
634 +)))
580 580  
636 +(((
581 581  486.3 - SF7BW125 to SF12BW125
638 +)))
582 582  
640 +(((
583 583  486.5 - SF7BW125 to SF12BW125
642 +)))
584 584  
644 +(((
585 585  486.7 - SF7BW125 to SF12BW125
646 +)))
586 586  
648 +(((
587 587  486.9 - SF7BW125 to SF12BW125
650 +)))
588 588  
652 +(((
589 589  487.1 - SF7BW125 to SF12BW125
654 +)))
590 590  
656 +(((
591 591  487.3 - SF7BW125 to SF12BW125
658 +)))
592 592  
660 +(((
593 593  487.5 - SF7BW125 to SF12BW125
662 +)))
594 594  
664 +(((
595 595  487.7 - SF7BW125 to SF12BW125
666 +)))
596 596  
668 +(((
669 +
670 +)))
597 597  
672 +(((
598 598  (% style="color:blue" %)**Downlink:**
674 +)))
599 599  
676 +(((
600 600  506.7 - SF7BW125 to SF12BW125
678 +)))
601 601  
680 +(((
602 602  506.9 - SF7BW125 to SF12BW125
682 +)))
603 603  
684 +(((
604 604  507.1 - SF7BW125 to SF12BW125
686 +)))
605 605  
688 +(((
606 606  507.3 - SF7BW125 to SF12BW125
690 +)))
607 607  
692 +(((
608 608  507.5 - SF7BW125 to SF12BW125
694 +)))
609 609  
696 +(((
610 610  507.7 - SF7BW125 to SF12BW125
698 +)))
611 611  
700 +(((
612 612  507.9 - SF7BW125 to SF12BW125
702 +)))
613 613  
704 +(((
614 614  508.1 - SF7BW125 to SF12BW125
706 +)))
615 615  
708 +(((
616 616  505.3 - SF12BW125 (RX2 downlink only)
710 +)))
617 617  
618 618  
619 619  
620 620  === 2.8.4 AU915-928(AU915) ===
621 621  
716 +
622 622  (((
623 623  Frequency band as per definition in LoRaWAN 1.0.3 Regional document.
624 624  )))
... ... @@ -636,119 +636,233 @@
636 636  )))
637 637  
638 638  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
639 -* Use the Join successful sub-band if the server doesnt include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
734 +* Use the Join successful sub-band if the server doesn't include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
640 640  
641 641  
642 642  
738 +
643 643  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
644 644  
741 +
742 +(((
645 645  (% style="color:blue" %)**Default Uplink channel:**
744 +)))
646 646  
746 +(((
647 647  923.2 - SF7BW125 to SF10BW125
748 +)))
648 648  
750 +(((
649 649  923.4 - SF7BW125 to SF10BW125
752 +)))
650 650  
754 +(((
755 +
756 +)))
651 651  
758 +(((
652 652  (% style="color:blue" %)**Additional Uplink Channel**:
760 +)))
653 653  
762 +(((
654 654  (OTAA mode, channel added by JoinAccept message)
764 +)))
655 655  
766 +(((
767 +
768 +)))
656 656  
770 +(((
657 657  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
772 +)))
658 658  
774 +(((
659 659  922.2 - SF7BW125 to SF10BW125
776 +)))
660 660  
778 +(((
661 661  922.4 - SF7BW125 to SF10BW125
780 +)))
662 662  
782 +(((
663 663  922.6 - SF7BW125 to SF10BW125
784 +)))
664 664  
786 +(((
665 665  922.8 - SF7BW125 to SF10BW125
788 +)))
666 666  
790 +(((
667 667  923.0 - SF7BW125 to SF10BW125
792 +)))
668 668  
794 +(((
669 669  922.0 - SF7BW125 to SF10BW125
796 +)))
670 670  
798 +(((
799 +
800 +)))
671 671  
802 +(((
672 672  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
804 +)))
673 673  
806 +(((
674 674  923.6 - SF7BW125 to SF10BW125
808 +)))
675 675  
810 +(((
676 676  923.8 - SF7BW125 to SF10BW125
812 +)))
677 677  
814 +(((
678 678  924.0 - SF7BW125 to SF10BW125
816 +)))
679 679  
818 +(((
680 680  924.2 - SF7BW125 to SF10BW125
820 +)))
681 681  
822 +(((
682 682  924.4 - SF7BW125 to SF10BW125
824 +)))
683 683  
826 +(((
684 684  924.6 - SF7BW125 to SF10BW125
828 +)))
685 685  
830 +(((
831 +
832 +)))
686 686  
834 +(((
687 687  (% style="color:blue" %)**Downlink:**
836 +)))
688 688  
838 +(((
689 689  Uplink channels 1-8 (RX1)
840 +)))
690 690  
842 +(((
691 691  923.2 - SF10BW125 (RX2)
844 +)))
692 692  
693 693  
694 694  
695 695  === 2.8.6 KR920-923 (KR920) ===
696 696  
850 +
851 +(((
697 697  (% style="color:blue" %)**Default channel:**
853 +)))
698 698  
855 +(((
699 699  922.1 - SF7BW125 to SF12BW125
857 +)))
700 700  
859 +(((
701 701  922.3 - SF7BW125 to SF12BW125
861 +)))
702 702  
863 +(((
703 703  922.5 - SF7BW125 to SF12BW125
865 +)))
704 704  
867 +(((
868 +
869 +)))
705 705  
871 +(((
706 706  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
873 +)))
707 707  
875 +(((
708 708  922.1 - SF7BW125 to SF12BW125
877 +)))
709 709  
879 +(((
710 710  922.3 - SF7BW125 to SF12BW125
881 +)))
711 711  
883 +(((
712 712  922.5 - SF7BW125 to SF12BW125
885 +)))
713 713  
887 +(((
714 714  922.7 - SF7BW125 to SF12BW125
889 +)))
715 715  
891 +(((
716 716  922.9 - SF7BW125 to SF12BW125
893 +)))
717 717  
895 +(((
718 718  923.1 - SF7BW125 to SF12BW125
897 +)))
719 719  
899 +(((
720 720  923.3 - SF7BW125 to SF12BW125
901 +)))
721 721  
903 +(((
904 +
905 +)))
722 722  
907 +(((
723 723  (% style="color:blue" %)**Downlink:**
909 +)))
724 724  
911 +(((
725 725  Uplink channels 1-7(RX1)
913 +)))
726 726  
915 +(((
727 727  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
917 +)))
728 728  
729 729  
730 730  
731 731  === 2.8.7 IN865-867 (IN865) ===
732 732  
923 +
924 +(((
733 733  (% style="color:blue" %)**Uplink:**
926 +)))
734 734  
928 +(((
735 735  865.0625 - SF7BW125 to SF12BW125
930 +)))
736 736  
932 +(((
737 737  865.4025 - SF7BW125 to SF12BW125
934 +)))
738 738  
936 +(((
739 739  865.9850 - SF7BW125 to SF12BW125
938 +)))
740 740  
940 +(((
941 +
942 +)))
741 741  
944 +(((
742 742  (% style="color:blue" %)**Downlink:**
946 +)))
743 743  
948 +(((
744 744  Uplink channels 1-3 (RX1)
950 +)))
745 745  
952 +(((
746 746  866.550 - SF10BW125 (RX2)
954 +)))
747 747  
748 748  
749 749  
750 750  == 2.9 LED Indicator ==
751 751  
960 +
752 752  The LSPH01 has an internal LED which is to show the status of different state.
753 753  
754 754  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
... ... @@ -756,14 +756,13 @@
756 756  
757 757  
758 758  
968 +
759 759  == 2.10 ​Firmware Change Log ==
760 760  
761 761  
762 -**Firmware download link:**
972 +**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/xtm5tw37mewaw99/AAD0uy06odmreQQ7vMzZYVIGa?dl=0>>https://www.dropbox.com/sh/xtm5tw37mewaw99/AAD0uy06odmreQQ7vMzZYVIGa?dl=0]]
763 763  
764 -[[http:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
765 765  
766 -
767 767  **Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>path:/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/]]
768 768  
769 769  
... ... @@ -770,31 +770,58 @@
770 770  
771 771  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
772 772  
981 +
982 +(((
773 773  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
984 +)))
774 774  
775 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
776 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
986 +* (((
987 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
988 +)))
989 +* (((
990 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
991 +)))
777 777  
993 +(((
778 778  There are two kinds of commands to configure LSPH01, they are:
995 +)))
779 779  
780 -* (% style="color:#4f81bd" %)** General Commands**.
997 +* (((
998 +(% style="color:#4f81bd" %)** General Commands**.
999 +)))
781 781  
1001 +(((
782 782  These commands are to configure:
1003 +)))
783 783  
784 -* General system settings like: uplink interval.
785 -* LoRaWAN protocol & radio related command.
1005 +* (((
1006 +General system settings like: uplink interval.
1007 +)))
1008 +* (((
1009 +LoRaWAN protocol & radio related command.
1010 +)))
786 786  
787 -They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
1012 +(((
1013 +They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki: [[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
1014 +)))
788 788  
1016 +(((
1017 +
1018 +)))
789 789  
790 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
1020 +* (((
1021 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
1022 +)))
791 791  
1024 +(((
792 792  These commands only valid for LSPH01, as below:
1026 +)))
793 793  
794 794  
795 795  
796 796  == 3.1 Set Transmit Interval Time ==
797 797  
1032 +
798 798  Feature: Change LoRaWAN End Node Transmit Interval.
799 799  
800 800  (% style="color:#037691" %)**AT Command: AT+TDC**
... ... @@ -802,46 +802,74 @@
802 802  [[image:image-20220607171554-8.png]]
803 803  
804 804  
805 -
1040 +(((
806 806  (% style="color:#037691" %)**Downlink Command: 0x01**
1042 +)))
807 807  
1044 +(((
808 808  Format: Command Code (0x01) followed by 3 bytes time value.
1046 +)))
809 809  
1048 +(((
810 810  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1050 +)))
811 811  
812 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
813 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1052 +* (((
1053 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1054 +)))
1055 +* (((
1056 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
814 814  
815 815  
816 816  
1060 +
1061 +)))
817 817  
818 818  == 3.2 Set Interrupt Mode ==
819 819  
1065 +
820 820  Feature, Set Interrupt mode for GPIO_EXIT.
821 821  
822 822  (% style="color:#037691" %)**AT Command: AT+INTMOD**
823 823  
824 -[[image:image-20220607171716-9.png]]
1070 +[[image:image-20220610105907-1.png]]
825 825  
826 826  
1073 +(((
827 827  (% style="color:#037691" %)**Downlink Command: 0x06**
1075 +)))
828 828  
1077 +(((
829 829  Format: Command Code (0x06) followed by 3 bytes.
1079 +)))
830 830  
1081 +(((
831 831  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1083 +)))
832 832  
833 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
834 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1085 +* (((
1086 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1087 +)))
1088 +* (((
1089 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1090 +)))
835 835  
1092 +(((
1093 +
1094 +)))
836 836  
1096 +
1097 +
837 837  == 3.3 Calibrate Sensor ==
838 838  
839 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
840 840  
1101 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
841 841  
842 842  
1104 +
843 843  == 3.4 Get Firmware Version Info ==
844 844  
1107 +
845 845  Feature: use downlink to get firmware version.
846 846  
847 847  (% style="color:#037691" %)**Downlink Command: 0x26**
... ... @@ -851,7 +851,6 @@
851 851  * Reply to the confirmation package: 26 01
852 852  * Reply to non-confirmed packet: 26 00
853 853  
854 -
855 855  Device will send an uplink after got this downlink command. With below payload:
856 856  
857 857  Configures info payload:
... ... @@ -869,14 +869,14 @@
869 869  
870 870  Version
871 871  )))|Sensor Type|Reserve|(((
872 -[[Message Type>>path:#H2.3.6MessageType]]
1134 +[[Message Type>>||anchor="H2.3.6MessageType"]]
873 873  Always 0x02
874 874  )))
875 875  
876 -**Software Type**: Always 0x03 for LSPH01
1138 +(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LSPH01
877 877  
878 878  
879 -**Frequency Band**:
1141 +(% style="color:#037691" %)**Frequency Band**:
880 880  
881 881  *0x01: EU868
882 882  
... ... @@ -899,13 +899,13 @@
899 899  *0xa0: AS923-3
900 900  
901 901  
902 -**Sub-Band**: value 0x00 ~~ 0x08
1164 +(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
903 903  
904 904  
905 -**Firmware Version**: 0x0100, Means: v1.0.0 version
1167 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
906 906  
907 907  
908 -**Sensor Type**:
1170 +(% style="color:#037691" %)**Sensor Type**:
909 909  
910 910  0x01: LSE01
911 911  
... ... @@ -925,14 +925,18 @@
925 925  
926 926  = 4. Battery & How to replace =
927 927  
1190 +
928 928  == 4.1 Battery Type ==
929 929  
1193 +
930 930  (((
931 931  LSPH01 is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.
932 932  )))
933 933  
934 934  (((
935 -The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1199 +The discharge curve is not linear so can't simply use percentage to show the battery level. Below is the battery performance.
1200 +
1201 +
936 936  )))
937 937  
938 938  [[image:1654593587246-335.png]]
... ... @@ -946,6 +946,7 @@
946 946  
947 947  == 4.2 Replace Battery ==
948 948  
1215 +
949 949  (((
950 950  Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.
951 951  )))
... ... @@ -958,6 +958,7 @@
958 958  
959 959  == 4.3 Power Consumption Analyze ==
960 960  
1228 +
961 961  (((
962 962  Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
963 963  )))
... ... @@ -967,12 +967,12 @@
967 967  )))
968 968  
969 969  
970 -**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
1238 +(% style="color:#037691" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
971 971  
972 972  [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
973 973  
974 974  
975 -**Step 2**: Open it and choose
1243 +(% style="color:#037691" %)**Step 2**(%%): Open it and choose
976 976  
977 977  * Product Model
978 978  * Uplink Interval
... ... @@ -986,13 +986,13 @@
986 986  The battery related documents as below:
987 987  
988 988  * (((
989 -[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
1257 +[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
990 990  )))
991 991  * (((
992 992  [[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
993 993  )))
994 994  * (((
995 -[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
1263 +[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
996 996  )))
997 997  
998 998  [[image:image-20220607172042-11.png]]
... ... @@ -1001,6 +1001,7 @@
1001 1001  
1002 1002  === 4.3.1 ​Battery Note ===
1003 1003  
1272 +
1004 1004  (((
1005 1005  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
1006 1006  )))
... ... @@ -1009,20 +1009,29 @@
1009 1009  
1010 1010  === ​4.3.2 Replace the battery ===
1011 1011  
1012 -You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1013 1013  
1014 -The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1282 +(((
1283 +You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
1284 +)))
1015 1015  
1286 +(((
1287 +The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1288 +)))
1016 1016  
1017 1017  
1291 +
1018 1018  = 5. Use AT Command =
1019 1019  
1294 +
1020 1020  == 5.1 Access AT Commands ==
1021 1021  
1297 +
1022 1022  LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.
1023 1023  
1300 +
1024 1024  [[image:1654593668970-604.png]]
1025 1025  
1303 +
1026 1026  **Connection:**
1027 1027  
1028 1028  (% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
... ... @@ -1032,20 +1032,23 @@
1032 1032  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1033 1033  
1034 1034  
1313 +(((
1035 1035  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1315 +)))
1036 1036  
1037 1037  
1038 1038   [[image:1654593712276-618.png]]
1039 1039  
1040 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1320 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1041 1041  
1042 1042  
1043 -
1044 1044  = 6. FAQ =
1045 1045  
1325 +
1046 1046  == 6.1 How to change the LoRa Frequency Bands/Region ==
1047 1047  
1048 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1328 +
1329 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1049 1049  When downloading the images, choose the required image file for download. ​
1050 1050  
1051 1051  
... ... @@ -1052,14 +1052,17 @@
1052 1052  
1053 1053  = 7. Trouble Shooting =
1054 1054  
1055 -== 7.1 AT Commands input doesn’t work ==
1056 1056  
1057 -In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesnt send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1337 +== 7.1 AT Commands input doesn't work ==
1058 1058  
1059 1059  
1340 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1060 1060  
1342 +
1343 +
1061 1061  = 8. Order Info =
1062 1062  
1346 +
1063 1063  Part Number: (% style="color:blue" %)**LSPH01-XX**
1064 1064  
1065 1065  
... ... @@ -1075,6 +1075,7 @@
1075 1075  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1076 1076  
1077 1077  
1362 +
1078 1078  = 9. ​Packing Info =
1079 1079  
1080 1080  
... ... @@ -1090,9 +1090,12 @@
1090 1090  * Weight / pcs : g
1091 1091  
1092 1092  
1378 +
1093 1093  = 10. ​Support =
1094 1094  
1381 +
1095 1095  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1096 1096  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]].
1097 1097  
1385 +
1098 1098  
image-20220610105907-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +15.5 KB
Content