Changes for page LSPH01 -- LoRaWAN Soil pH Sensor User Manual

Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 1 added, 0 removed)
  • image-20220610105907-1.png

Details

Page properties

Content

...	...	@@ -4,75 +4,31 @@
4	4
5	5
6	6
7		-**Contents:**
8	8
9		-* [[1. Introduction>>path:#H1.Introduction]]
10		-** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11		-** [[​1.2 Features>>path:#H200B1.2Features]]
12		-** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13		-** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14		-** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15		-* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16		-** [[2.1 How it works>>path:#H2.1Howitworks]]
17		-** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18		-** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19		-*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20		-*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21		-*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22		-*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23		-*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24		-*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25		-*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26		-** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27		-** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28		-** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29		-*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30		-*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31		-*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32		-** [[2.7 Calibration>>path:#H2.7Calibration]]
33		-** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34		-*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35		-*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36		-*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37		-*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38		-*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39		-*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40		-*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41		-** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42		-** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43		-* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44		-** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45		-** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46		-** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47		-** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48		-* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49		-** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50		-** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51		-** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52		-*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53		-*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54		-* [[5. Use AT Command>>path:#H5.UseATCommand]]
55		-** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56		-* [[6. FAQ>>path:#H6.FAQ]]
57		-** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58		-* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59		-** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60		-* [[8. Order Info>>path:#H8.OrderInfo]]
61		-* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62		-* [[10. ​Support>>path:#H10.A0200BSupport]]
63	63
64	64
65	65
66	66
	12	+**Table of Contents:**
67	67
	14	+{{toc/}}
68	68
69	69
70	70
	18	+
	19	+
	20	+
	21	+
	22	+
	23	+
	24	+
71	71	= 1. Introduction =
72	72
73	73	== 1.1 ​What is LoRaWAN Soil pH Sensor ==
74	74
75	75	(((
	30	+
	31	+
76	76	The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
77	77	)))
78	78
...	...	@@ -97,6 +97,7 @@
97	97
98	98
99	99
	56	+
100	100	== ​1.2 Features ==
101	101
102	102	* LoRaWAN 1.0.3 Class A
...	...	@@ -114,7 +114,6 @@
114	114	* 8500mAh Battery for long term use
115	115
116	116
117		-
118	118	== 1.3 Probe Specification ==
119	119
120	120
...	...	@@ -136,13 +136,11 @@
136	136	* Length: 3.5 meters
137	137
138	138
139		-
140	140	== 1.4 ​Applications ==
141	141
142	142	* Smart Agriculture
143	143
144	144
145		-
146	146	== 1.5 Pin mapping and power on ==
147	147
148	148	[[image:1654592472094-134.png]]
...	...	@@ -158,7 +158,7 @@
158	158	)))
159	159
160	160	(((
161		-In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
	115	+In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
162	162	)))
163	163
164	164
...	...	@@ -170,10 +170,14 @@
170	170
171	171	(((
172	172	[[image:1654592492399-921.png]]
	127	+
	128	+
173	173	)))
174	174
175	175	(((
176	176	The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
	133	+
	134	+
177	177	)))
178	178
179	179	(((
...	...	@@ -197,11 +197,13 @@
197	197	[[image:1654592600093-601.png]]
198	198
199	199
	158	+
200	200	**Add APP EUI and DEV EUI**
201	201
202	202	[[image:1654592619856-881.png]]
203	203
204	204
	164	+
205	205	**Add APP EUI in the application**
206	206
207	207	[[image:1654592632656-512.png]]
...	...	@@ -221,7 +221,9 @@
221	221	[[image:image-20220607170442-2.png]]
222	222
223	223
	184	+(((
224	224	(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	186	+)))
225	225
226	226	[[image:1654592697690-910.png]]
227	227
...	...	@@ -229,26 +229,30 @@
229	229
230	230	== 2.3 ​Uplink Payload ==
231	231
	194	+(((
232	232	LSPH01 will uplink payload via LoRaWAN with below payload format:
	196	+)))
233	233
	198	+(((
234	234	Uplink payload includes in total 11 bytes.
	200	+)))
235	235
	202	+(((
236	236	Normal uplink payload:
	204	+)))
237	237
238	238	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
239		-|(((
240		-**Size**
	207	+|=(% style="width: 62.5px;" %)(((
	208	+**Size (bytes)**
	209	+)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
	210	+|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
	211	+[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
241	241
242		-**(bytes)**
243		-)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
244		-|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
245		-[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
246		-
247		-[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
248		-)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
249		-[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
	213	+[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
	214	+)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
	215	+[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
250	250	)))|Reserve|(((
251		-[[Message Type>>path:#H2.3.6MessageType]]
	217	+[[Message Type>>||anchor="H2.3.6MessageType"]]
252	252	)))
253	253
254	254	[[image:1654592721645-318.png]]
...	...	@@ -304,7 +304,7 @@
304	304
305	305	=== 2.3.5 Interrupt Pin ===
306	306
307		-This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
	273	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
308	308
309	309
310	310	**Example:**
...	...	@@ -317,20 +317,22 @@
317	317
318	318	=== 2.3.6 Message Type ===
319	319
	286	+(((
320	320	For a normal uplink payload, the message type is always 0x01.
	288	+)))
321	321
	290	+(((
322	322	Valid Message Type:
	292	+)))
323	323
324	324
325		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
326		-|**Message Type Code**|**Description**|**Payload**
327		-|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
328		-|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
329		-|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
	295	+(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
	296	+|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
	297	+|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
	298	+|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
	299	+|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
330	330
331	331
332		-
333		-
334	334	=== 2.3.7 Decode payload in The Things Network ===
335	335
336	336	While using TTN network, you can add the payload format to decode the payload.
...	...	@@ -350,18 +350,27 @@
350	350
351	351	== 2.4 Uplink Interval ==
352	352
353		-The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
	321	+The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
354	354
355	355
356	356
357	357	== 2.5 ​Show Data in DataCake IoT Server ==
358	358
	327	+(((
359	359	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
	329	+)))
360	360
	331	+(((
	332	+
	333	+)))
361	361
	335	+(((
362	362	(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
	337	+)))
363	363
	339	+(((
364	364	(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
	341	+)))
365	365
366	366
367	367	[[image:1654592790040-760.png]]
...	...	@@ -384,9 +384,13 @@
384	384	[[image:1654592856403-259.png]]
385	385
386	386
	364	+(((
387	387	(% style="color:blue" %)**Step 5**(%%)**: add payload decode**
	366	+)))
388	388
	368	+(((
389	389	Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
	370	+)))
390	390
391	391
392	392	[[image:1654592878525-845.png]]
...	...	@@ -409,8 +409,10 @@
409	409	=== 2.6.1 Before measurement ===
410	410
411	411	(((
	393	+(((
412	412	If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.
413	413	)))
	396	+)))
414	414
415	415
416	416
...	...	@@ -417,24 +417,45 @@
417	417	=== 2.6.2 Measurement ===
418	418
419	419
	403	+(((
420	420	(% style="color:#4f81bd" %)**Measurement the soil surface:**
	405	+)))
421	421
	407	+(((
422	422	[[image:1654592946732-634.png]]
	409	+)))
423	423
	411	+(((
424	424	Choose the proper measuring position. Split the surface soil according to the measured deep.
	413	+)))
425	425
	415	+(((
426	426	Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
	417	+)))
427	427
	419	+(((
428	428	Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
	421	+)))
429	429
	423	+(((
430	430	Put soil over the probe after insert. And start to measure.
	425	+)))
431	431
	427	+(((
	428	+
	429	+)))
432	432
	431	+(((
433	433	(% style="color:#4f81bd" %)**Measurement inside soil:**
	433	+)))
434	434
	435	+(((
435	435	Dig a hole with diameter > 20CM.
	437	+)))
436	436
	439	+(((
437	437	Insert the probe inside, method like measure the surface.
	441	+)))
438	438
439	439
440	440
...	...	@@ -464,9 +464,13 @@
464	464
465	465	== 2.7 Calibration ==
466	466
	471	+(((
467	467	User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
	473	+)))
468	468
	475	+(((
469	469	After stable, user can use below command to calibrate.
	477	+)))
470	470
471	471	[[image:image-20220607171149-4.png]]
472	472
...	...	@@ -473,12 +473,10 @@
473	473
474	474	(% style="color:#037691" %)**Calibration Payload**
475	475
476		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
477		-|(((
478		-**Size**
479		-
480		-**(bytes)**
481		-)))|**1**|**1**|**1**|**7**|**1**
	484	+(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
	485	+|=(% style="width: 62.5px;" %)(((
	486	+**Size (bytes)**
	487	+)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
482	482	|**Value**|(((
483	483	PH4
484	484
...	...	@@ -488,7 +488,7 @@
488	488
489	489	Calibrate value
490	490	)))|Reserve|(((
491		-[[Message Type>>path:#H2.3.6MessageType]]
	497	+[[Message Type>>||anchor="H2.3.6MessageType"]]
492	492
493	493	Always 0x03
494	494	)))
...	...	@@ -513,32 +513,61 @@
513	513
514	514	=== 2.8.1 EU863-870 (EU868) ===
515	515
	522	+(((
516	516	(% style="color:blue" %)**Uplink:**
	524	+)))
517	517
	526	+(((
518	518	868.1 - SF7BW125 to SF12BW125
	528	+)))
519	519
	530	+(((
520	520	868.3 - SF7BW125 to SF12BW125 and SF7BW250
	532	+)))
521	521
	534	+(((
522	522	868.5 - SF7BW125 to SF12BW125
	536	+)))
523	523
	538	+(((
524	524	867.1 - SF7BW125 to SF12BW125
	540	+)))
525	525
	542	+(((
526	526	867.3 - SF7BW125 to SF12BW125
	544	+)))
527	527
	546	+(((
528	528	867.5 - SF7BW125 to SF12BW125
	548	+)))
529	529
	550	+(((
530	530	867.7 - SF7BW125 to SF12BW125
	552	+)))
531	531
	554	+(((
532	532	867.9 - SF7BW125 to SF12BW125
	556	+)))
533	533
	558	+(((
534	534	868.8 - FSK
	560	+)))
535	535
	562	+(((
	563	+
	564	+)))
536	536
	566	+(((
537	537	(% style="color:blue" %)**Downlink:**
	568	+)))
538	538
	570	+(((
539	539	Uplink channels 1-9 (RX1)
	572	+)))
540	540
	574	+(((
541	541	869.525 - SF9BW125 (RX2 downlink only)
	576	+)))
542	542
543	543
544	544
...	...	@@ -562,46 +562,89 @@
562	562
563	563	=== 2.8.3 CN470-510 (CN470) ===
564	564
	600	+(((
565	565	Used in China, Default use CHE=1
	602	+)))
566	566
	604	+(((
567	567	(% style="color:blue" %)**Uplink:**
	606	+)))
568	568
	608	+(((
569	569	486.3 - SF7BW125 to SF12BW125
	610	+)))
570	570
	612	+(((
571	571	486.5 - SF7BW125 to SF12BW125
	614	+)))
572	572
	616	+(((
573	573	486.7 - SF7BW125 to SF12BW125
	618	+)))
574	574
	620	+(((
575	575	486.9 - SF7BW125 to SF12BW125
	622	+)))
576	576
	624	+(((
577	577	487.1 - SF7BW125 to SF12BW125
	626	+)))
578	578
	628	+(((
579	579	487.3 - SF7BW125 to SF12BW125
	630	+)))
580	580
	632	+(((
581	581	487.5 - SF7BW125 to SF12BW125
	634	+)))
582	582
	636	+(((
583	583	487.7 - SF7BW125 to SF12BW125
	638	+)))
584	584
	640	+(((
	641	+
	642	+)))
585	585
	644	+(((
586	586	(% style="color:blue" %)**Downlink:**
	646	+)))
587	587
	648	+(((
588	588	506.7 - SF7BW125 to SF12BW125
	650	+)))
589	589
	652	+(((
590	590	506.9 - SF7BW125 to SF12BW125
	654	+)))
591	591
	656	+(((
592	592	507.1 - SF7BW125 to SF12BW125
	658	+)))
593	593
	660	+(((
594	594	507.3 - SF7BW125 to SF12BW125
	662	+)))
595	595
	664	+(((
596	596	507.5 - SF7BW125 to SF12BW125
	666	+)))
597	597
	668	+(((
598	598	507.7 - SF7BW125 to SF12BW125
	670	+)))
599	599
	672	+(((
600	600	507.9 - SF7BW125 to SF12BW125
	674	+)))
601	601
	676	+(((
602	602	508.1 - SF7BW125 to SF12BW125
	678	+)))
603	603
	680	+(((
604	604	505.3 - SF12BW125 (RX2 downlink only)
	682	+)))
605	605
606	606
607	607
...	...	@@ -627,111 +627,219 @@
627	627	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
628	628
629	629
630		-
631	631	=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
632	632
	710	+(((
633	633	(% style="color:blue" %)**Default Uplink channel:**
	712	+)))
634	634
	714	+(((
635	635	923.2 - SF7BW125 to SF10BW125
	716	+)))
636	636
	718	+(((
637	637	923.4 - SF7BW125 to SF10BW125
	720	+)))
638	638
	722	+(((
	723	+
	724	+)))
639	639
	726	+(((
640	640	(% style="color:blue" %)**Additional Uplink Channel**:
	728	+)))
641	641
	730	+(((
642	642	(OTAA mode, channel added by JoinAccept message)
	732	+)))
643	643
	734	+(((
	735	+
	736	+)))
644	644
	738	+(((
645	645	(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
	740	+)))
646	646
	742	+(((
647	647	922.2 - SF7BW125 to SF10BW125
	744	+)))
648	648
	746	+(((
649	649	922.4 - SF7BW125 to SF10BW125
	748	+)))
650	650
	750	+(((
651	651	922.6 - SF7BW125 to SF10BW125
	752	+)))
652	652
	754	+(((
653	653	922.8 - SF7BW125 to SF10BW125
	756	+)))
654	654
	758	+(((
655	655	923.0 - SF7BW125 to SF10BW125
	760	+)))
656	656
	762	+(((
657	657	922.0 - SF7BW125 to SF10BW125
	764	+)))
658	658
	766	+(((
	767	+
	768	+)))
659	659
	770	+(((
660	660	(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
	772	+)))
661	661
	774	+(((
662	662	923.6 - SF7BW125 to SF10BW125
	776	+)))
663	663
	778	+(((
664	664	923.8 - SF7BW125 to SF10BW125
	780	+)))
665	665
	782	+(((
666	666	924.0 - SF7BW125 to SF10BW125
	784	+)))
667	667
	786	+(((
668	668	924.2 - SF7BW125 to SF10BW125
	788	+)))
669	669
	790	+(((
670	670	924.4 - SF7BW125 to SF10BW125
	792	+)))
671	671
	794	+(((
672	672	924.6 - SF7BW125 to SF10BW125
	796	+)))
673	673
	798	+(((
	799	+
	800	+)))
674	674
	802	+(((
675	675	(% style="color:blue" %)**Downlink:**
	804	+)))
676	676
	806	+(((
677	677	Uplink channels 1-8 (RX1)
	808	+)))
678	678
	810	+(((
679	679	923.2 - SF10BW125 (RX2)
	812	+)))
680	680
681	681
682	682
683	683	=== 2.8.6 KR920-923 (KR920) ===
684	684
	818	+(((
685	685	(% style="color:blue" %)**Default channel:**
	820	+)))
686	686
	822	+(((
687	687	922.1 - SF7BW125 to SF12BW125
	824	+)))
688	688
	826	+(((
689	689	922.3 - SF7BW125 to SF12BW125
	828	+)))
690	690
	830	+(((
691	691	922.5 - SF7BW125 to SF12BW125
	832	+)))
692	692
	834	+(((
	835	+
	836	+)))
693	693
	838	+(((
694	694	(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
	840	+)))
695	695
	842	+(((
696	696	922.1 - SF7BW125 to SF12BW125
	844	+)))
697	697
	846	+(((
698	698	922.3 - SF7BW125 to SF12BW125
	848	+)))
699	699
	850	+(((
700	700	922.5 - SF7BW125 to SF12BW125
	852	+)))
701	701
	854	+(((
702	702	922.7 - SF7BW125 to SF12BW125
	856	+)))
703	703
	858	+(((
704	704	922.9 - SF7BW125 to SF12BW125
	860	+)))
705	705
	862	+(((
706	706	923.1 - SF7BW125 to SF12BW125
	864	+)))
707	707
	866	+(((
708	708	923.3 - SF7BW125 to SF12BW125
	868	+)))
709	709
	870	+(((
	871	+
	872	+)))
710	710
	874	+(((
711	711	(% style="color:blue" %)**Downlink:**
	876	+)))
712	712
	878	+(((
713	713	Uplink channels 1-7(RX1)
	880	+)))
714	714
	882	+(((
715	715	921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
	884	+)))
716	716
717	717
718	718
719	719	=== 2.8.7 IN865-867 (IN865) ===
720	720
	890	+(((
721	721	(% style="color:blue" %)**Uplink:**
	892	+)))
722	722
	894	+(((
723	723	865.0625 - SF7BW125 to SF12BW125
	896	+)))
724	724
	898	+(((
725	725	865.4025 - SF7BW125 to SF12BW125
	900	+)))
726	726
	902	+(((
727	727	865.9850 - SF7BW125 to SF12BW125
	904	+)))
728	728
	906	+(((
	907	+
	908	+)))
729	729
	910	+(((
730	730	(% style="color:blue" %)**Downlink:**
	912	+)))
731	731
	914	+(((
732	732	Uplink channels 1-3 (RX1)
	916	+)))
733	733
	918	+(((
734	734	866.550 - SF10BW125 (RX2)
	920	+)))
735	735
736	736
737	737
...	...	@@ -743,7 +743,6 @@
743	743	* Blink once when device transmit a packet.
744	744
745	745
746		-
747	747	== 2.10 ​Firmware Change Log ==
748	748
749	749
...	...	@@ -758,26 +758,51 @@
758	758
759	759	= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
760	760
	946	+(((
761	761	Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
	948	+)))
762	762
763		-* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
764		-* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	950	+* (((
	951	+AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
	952	+)))
	953	+* (((
	954	+LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	955	+)))
765	765
	957	+(((
766	766	There are two kinds of commands to configure LSPH01, they are:
	959	+)))
767	767
768		-* (% style="color:#4f81bd" %)** General Commands**.
	961	+* (((
	962	+(% style="color:#4f81bd" %)** General Commands**.
	963	+)))
769	769
	965	+(((
770	770	These commands are to configure:
	967	+)))
771	771
772		-* General system settings like: uplink interval.
773		-* LoRaWAN protocol & radio related command.
	969	+* (((
	970	+General system settings like: uplink interval.
	971	+)))
	972	+* (((
	973	+LoRaWAN protocol & radio related command.
	974	+)))
774	774
	976	+(((
775	775	They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	978	+)))
776	776
	980	+(((
	981	+
	982	+)))
777	777
778		-* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
	984	+* (((
	985	+(% style="color:#4f81bd" %)** Commands special design for LSPH01**
	986	+)))
779	779
	988	+(((
780	780	These commands only valid for LSPH01, as below:
	990	+)))
781	781
782	782
783	783
...	...	@@ -790,19 +790,28 @@
790	790	[[image:image-20220607171554-8.png]]
791	791
792	792
793		-
	1003	+(((
794	794	(% style="color:#037691" %)**Downlink Command: 0x01**
	1005	+)))
795	795
	1007	+(((
796	796	Format: Command Code (0x01) followed by 3 bytes time value.
	1009	+)))
797	797
	1011	+(((
798	798	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	1013	+)))
799	799
800		-* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
801		-* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	1015	+* (((
	1016	+Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	1017	+)))
	1018	+* (((
	1019	+Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
802	802
803	803
	1022	+
	1023	+)))
804	804
805		-
806	806	== 3.2 Set Interrupt Mode ==
807	807
808	808	Feature, Set Interrupt mode for GPIO_EXIT.
...	...	@@ -809,22 +809,37 @@
809	809
810	810	(% style="color:#037691" %)**AT Command: AT+INTMOD**
811	811
812		-[[image:image-20220607171716-9.png]]
	1031	+[[image:image-20220610105907-1.png]]
813	813
814	814
	1034	+(((
815	815	(% style="color:#037691" %)**Downlink Command: 0x06**
	1036	+)))
816	816
	1038	+(((
817	817	Format: Command Code (0x06) followed by 3 bytes.
	1040	+)))
818	818
	1042	+(((
819	819	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
	1044	+)))
820	820
821		-* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
822		-* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1046	+* (((
	1047	+Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
	1048	+)))
	1049	+* (((
	1050	+Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1051	+)))
823	823
	1053	+(((
	1054	+
	1055	+)))
824	824
	1057	+
	1058	+
825	825	== 3.3 Calibrate Sensor ==
826	826
827		-Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
	1061	+Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
828	828
829	829
830	830
...	...	@@ -839,7 +839,6 @@
839	839	* Reply to the confirmation package: 26 01
840	840	* Reply to non-confirmed packet: 26 00
841	841
842		-
843	843	Device will send an uplink after got this downlink command. With below payload:
844	844
845	845	Configures info payload:
...	...	@@ -857,14 +857,14 @@
857	857
858	858	Version
859	859	)))|Sensor Type|Reserve|(((
860		-[[Message Type>>path:#H2.3.6MessageType]]
	1093	+[[Message Type>>||anchor="H2.3.6MessageType"]]
861	861	Always 0x02
862	862	)))
863	863
864		-**Software Type**: Always 0x03 for LSPH01
	1097	+(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LSPH01
865	865
866	866
867		-**Frequency Band**:
	1100	+(% style="color:#037691" %)**Frequency Band**:
868	868
869	869	*0x01: EU868
870	870
...	...	@@ -887,13 +887,13 @@
887	887	*0xa0: AS923-3
888	888
889	889
890		-**Sub-Band**: value 0x00 ~~ 0x08
	1123	+(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
891	891
892	892
893		-**Firmware Version**: 0x0100, Means: v1.0.0 version
	1126	+(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
894	894
895	895
896		-**Sensor Type**:
	1129	+(% style="color:#037691" %)**Sensor Type**:
897	897
898	898	0x01: LSE01
899	899
...	...	@@ -920,7 +920,7 @@
920	920	)))
921	921
922	922	(((
923		-The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
	1156	+The discharge curve is not linear so can't simply use percentage to show the battery level. Below is the battery performance.
924	924	)))
925	925
926	926	[[image:1654593587246-335.png]]
...	...	@@ -955,12 +955,12 @@
955	955	)))
956	956
957	957
958		-**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
	1191	+(% style="color:#037691" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
959	959
960	960	[[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
961	961
962	962
963		-**Step 2**: Open it and choose
	1196	+(% style="color:#037691" %)**Step 2**(%%): Open it and choose
964	964
965	965	* Product Model
966	966	* Uplink Interval
...	...	@@ -974,13 +974,13 @@
974	974	The battery related documents as below:
975	975
976	976	* (((
977		-[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
	1210	+[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
978	978	)))
979	979	* (((
980	980	[[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
981	981	)))
982	982	* (((
983		-[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
	1216	+[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
984	984	)))
985	985
986	986	[[image:image-20220607172042-11.png]]
...	...	@@ -997,9 +997,13 @@
997	997
998	998	=== ​4.3.2 Replace the battery ===
999	999
1000		-You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
	1233	+(((
	1234	+You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
	1235	+)))
1001	1001
	1237	+(((
1002	1002	The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
	1239	+)))
1003	1003
1004	1004
1005	1005
...	...	@@ -1020,29 +1020,29 @@
1020	1020	(% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1021	1021
1022	1022
	1260	+(((
1023	1023	In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
	1262	+)))
1024	1024
1025	1025
1026	1026	[[image:1654593712276-618.png]]
1027	1027
1028		-Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
	1267	+Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1029	1029
1030	1030
1031		-
1032	1032	= 6. FAQ =
1033	1033
1034	1034	== 6.1 How to change the LoRa Frequency Bands/Region ==
1035	1035
1036		-You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
	1274	+You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1037	1037	When downloading the images, choose the required image file for download. ​
1038	1038
1039	1039
1040		-
1041	1041	= 7. Trouble Shooting =
1042	1042
1043		-== 7.1 AT Commands input doesn’t work ==
	1280	+== 7.1 AT Commands input doesn't work ==
1044	1044
1045		-In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
	1282	+In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1046	1046
1047	1047
1048	1048
...	...	@@ -1063,6 +1063,10 @@
1063	1063	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1064	1064
1065	1065
	1303	+
	1304	+
	1305	+
	1306	+
1066	1066	= 9. ​Packing Info =
1067	1067
1068	1068
...	...	@@ -1078,6 +1078,10 @@
1078	1078	* Weight / pcs : g
1079	1079
1080	1080
	1322	+
	1323	+
	1324	+
	1325	+
1081	1081	= 10. ​Support =
1082	1082
1083	1083	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

image-20220610105907-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+15.5 KB

Content