Skip to Content
Last modified by Xiaoling on 2025/04/25 14:08
From version 73.13
edited by Xiaoling
on 2022/06/07 17:39
Change comment: There is no comment for this version
To version 92.2
edited by Xiaoling
on 2022/06/25 17:04
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -4,75 +4,31 @@
4 4  
5 5  
6 6  
7 -**Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 65  
66 66  
12 +**Table of Contents:**
67 67  
14 +{{toc/}}
68 68  
69 69  
70 70  
18 +
19 +
20 +
21 +
22 +
23 +
24 +
71 71  = 1. Introduction =
72 72  
73 73  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
74 74  
75 75  (((
30 +
31 +
76 76  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
77 77  )))
78 78  
... ... @@ -97,6 +97,7 @@
97 97  
98 98  
99 99  
56 +
100 100  == ​1.2 Features ==
101 101  
102 102  * LoRaWAN 1.0.3 Class A
... ... @@ -115,6 +115,7 @@
115 115  
116 116  
117 117  
75 +
118 118  == 1.3 Probe Specification ==
119 119  
120 120  
... ... @@ -137,6 +137,7 @@
137 137  
138 138  
139 139  
98 +
140 140  == 1.4 ​Applications ==
141 141  
142 142  * Smart Agriculture
... ... @@ -143,6 +143,7 @@
143 143  
144 144  
145 145  
105 +
146 146  == 1.5 Pin mapping and power on ==
147 147  
148 148  [[image:1654592472094-134.png]]
... ... @@ -158,7 +158,7 @@
158 158  )))
159 159  
160 160  (((
161 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
121 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
162 162  )))
163 163  
164 164  
... ... @@ -170,10 +170,14 @@
170 170  
171 171  (((
172 172  [[image:1654592492399-921.png]]
133 +
134 +
173 173  )))
174 174  
175 175  (((
176 176  The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
139 +
140 +
177 177  )))
178 178  
179 179  (((
... ... @@ -197,11 +197,13 @@
197 197  [[image:1654592600093-601.png]]
198 198  
199 199  
164 +
200 200  **Add APP EUI and DEV EUI**
201 201  
202 202  [[image:1654592619856-881.png]]
203 203  
204 204  
170 +
205 205  **Add APP EUI in the application**
206 206  
207 207  [[image:1654592632656-512.png]]
... ... @@ -221,7 +221,9 @@
221 221  [[image:image-20220607170442-2.png]]
222 222  
223 223  
190 +(((
224 224  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
192 +)))
225 225  
226 226  [[image:1654592697690-910.png]]
227 227  
... ... @@ -229,26 +229,30 @@
229 229  
230 230  == 2.3 ​Uplink Payload ==
231 231  
200 +(((
232 232  LSPH01 will uplink payload via LoRaWAN with below payload format: 
202 +)))
233 233  
204 +(((
234 234  Uplink payload includes in total 11 bytes.
206 +)))
235 235  
208 +(((
236 236  Normal uplink payload:
210 +)))
237 237  
238 238  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
239 -|(((
240 -**Size**
213 +|=(% style="width: 62.5px;" %)(((
214 +**Size (bytes)**
215 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
216 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
217 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
241 241  
242 -**(bytes)**
243 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
244 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
245 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
246 -
247 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
248 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
249 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
219 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
220 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
221 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
250 250  )))|Reserve|(((
251 -[[Message Type>>path:#H2.3.6MessageType]]
223 +[[Message Type>>||anchor="H2.3.6MessageType"]]
252 252  )))
253 253  
254 254  [[image:1654592721645-318.png]]
... ... @@ -304,7 +304,7 @@
304 304  
305 305  === 2.3.5 Interrupt Pin ===
306 306  
307 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
279 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
308 308  
309 309  
310 310  **Example:**
... ... @@ -317,16 +317,20 @@
317 317  
318 318  === 2.3.6 Message Type ===
319 319  
292 +(((
320 320  For a normal uplink payload, the message type is always 0x01.
294 +)))
321 321  
296 +(((
322 322  Valid Message Type:
298 +)))
323 323  
324 324  
325 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
326 -|**Message Type Code**|**Description**|**Payload**
327 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
328 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
329 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
301 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
302 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
303 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
304 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
305 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
330 330  
331 331  
332 332  
... ... @@ -350,18 +350,27 @@
350 350  
351 351  == 2.4 Uplink Interval ==
352 352  
353 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
329 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
354 354  
355 355  
356 356  
357 357  == 2.5 ​Show Data in DataCake IoT Server ==
358 358  
335 +(((
359 359  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
337 +)))
360 360  
339 +(((
340 +
341 +)))
361 361  
343 +(((
362 362  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
345 +)))
363 363  
347 +(((
364 364  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
349 +)))
365 365  
366 366  
367 367  [[image:1654592790040-760.png]]
... ... @@ -384,9 +384,13 @@
384 384  [[image:1654592856403-259.png]]
385 385  
386 386  
372 +(((
387 387  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
374 +)))
388 388  
376 +(((
389 389  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
378 +)))
390 390  
391 391  
392 392  [[image:1654592878525-845.png]]
... ... @@ -409,8 +409,10 @@
409 409  === 2.6.1 Before measurement ===
410 410  
411 411  (((
401 +(((
412 412  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
413 413  )))
404 +)))
414 414  
415 415  
416 416  
... ... @@ -417,24 +417,45 @@
417 417  === 2.6.2 Measurement ===
418 418  
419 419  
411 +(((
420 420  (% style="color:#4f81bd" %)**Measurement the soil surface:**
413 +)))
421 421  
415 +(((
422 422  [[image:1654592946732-634.png]]
417 +)))
423 423  
419 +(((
424 424  Choose the proper measuring position. Split the surface soil according to the measured deep.
421 +)))
425 425  
423 +(((
426 426  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
425 +)))
427 427  
427 +(((
428 428  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
429 +)))
429 429  
431 +(((
430 430  Put soil over the probe after insert. And start to measure.
433 +)))
431 431  
435 +(((
436 +
437 +)))
432 432  
439 +(((
433 433  (% style="color:#4f81bd" %)**Measurement inside soil:**
441 +)))
434 434  
443 +(((
435 435  Dig a hole with diameter > 20CM.
445 +)))
436 436  
447 +(((
437 437  Insert the probe inside, method like measure the surface.
449 +)))
438 438  
439 439  
440 440  
... ... @@ -464,9 +464,13 @@
464 464  
465 465  == 2.7 Calibration ==
466 466  
479 +(((
467 467  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
481 +)))
468 468  
483 +(((
469 469  After stable, user can use below command to calibrate.
485 +)))
470 470  
471 471  [[image:image-20220607171149-4.png]]
472 472  
... ... @@ -473,12 +473,10 @@
473 473  
474 474  (% style="color:#037691" %)**Calibration Payload**
475 475  
476 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
477 -|(((
478 -**Size**
479 -
480 -**(bytes)**
481 -)))|**1**|**1**|**1**|**7**|**1**
492 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
493 +|=(% style="width: 62.5px;" %)(((
494 +**Size (bytes)**
495 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
482 482  |**Value**|(((
483 483  PH4
484 484  
... ... @@ -488,7 +488,7 @@
488 488  
489 489  Calibrate value
490 490  )))|Reserve|(((
491 -[[Message Type>>path:#H2.3.6MessageType]]
505 +[[Message Type>>||anchor="H2.3.6MessageType"]]
492 492  
493 493  Always 0x03
494 494  )))
... ... @@ -504,6 +504,8 @@
504 504  
505 505  
506 506  
521 +
522 +
507 507  == 2.8 Frequency Plans ==
508 508  
509 509  (((
... ... @@ -513,32 +513,61 @@
513 513  
514 514  === 2.8.1 EU863-870 (EU868) ===
515 515  
532 +(((
516 516  (% style="color:blue" %)**Uplink:**
534 +)))
517 517  
536 +(((
518 518  868.1 - SF7BW125 to SF12BW125
538 +)))
519 519  
540 +(((
520 520  868.3 - SF7BW125 to SF12BW125 and SF7BW250
542 +)))
521 521  
544 +(((
522 522  868.5 - SF7BW125 to SF12BW125
546 +)))
523 523  
548 +(((
524 524  867.1 - SF7BW125 to SF12BW125
550 +)))
525 525  
552 +(((
526 526  867.3 - SF7BW125 to SF12BW125
554 +)))
527 527  
556 +(((
528 528  867.5 - SF7BW125 to SF12BW125
558 +)))
529 529  
560 +(((
530 530  867.7 - SF7BW125 to SF12BW125
562 +)))
531 531  
564 +(((
532 532  867.9 - SF7BW125 to SF12BW125
566 +)))
533 533  
568 +(((
534 534  868.8 - FSK
570 +)))
535 535  
572 +(((
573 +
574 +)))
536 536  
576 +(((
537 537  (% style="color:blue" %)**Downlink:**
578 +)))
538 538  
580 +(((
539 539  Uplink channels 1-9 (RX1)
582 +)))
540 540  
584 +(((
541 541  869.525 - SF9BW125 (RX2 downlink only)
586 +)))
542 542  
543 543  
544 544  
... ... @@ -560,48 +560,93 @@
560 560  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
561 561  
562 562  
608 +
609 +
563 563  === 2.8.3 CN470-510 (CN470) ===
564 564  
612 +(((
565 565  Used in China, Default use CHE=1
614 +)))
566 566  
616 +(((
567 567  (% style="color:blue" %)**Uplink:**
618 +)))
568 568  
620 +(((
569 569  486.3 - SF7BW125 to SF12BW125
622 +)))
570 570  
624 +(((
571 571  486.5 - SF7BW125 to SF12BW125
626 +)))
572 572  
628 +(((
573 573  486.7 - SF7BW125 to SF12BW125
630 +)))
574 574  
632 +(((
575 575  486.9 - SF7BW125 to SF12BW125
634 +)))
576 576  
636 +(((
577 577  487.1 - SF7BW125 to SF12BW125
638 +)))
578 578  
640 +(((
579 579  487.3 - SF7BW125 to SF12BW125
642 +)))
580 580  
644 +(((
581 581  487.5 - SF7BW125 to SF12BW125
646 +)))
582 582  
648 +(((
583 583  487.7 - SF7BW125 to SF12BW125
650 +)))
584 584  
652 +(((
653 +
654 +)))
585 585  
656 +(((
586 586  (% style="color:blue" %)**Downlink:**
658 +)))
587 587  
660 +(((
588 588  506.7 - SF7BW125 to SF12BW125
662 +)))
589 589  
664 +(((
590 590  506.9 - SF7BW125 to SF12BW125
666 +)))
591 591  
668 +(((
592 592  507.1 - SF7BW125 to SF12BW125
670 +)))
593 593  
672 +(((
594 594  507.3 - SF7BW125 to SF12BW125
674 +)))
595 595  
676 +(((
596 596  507.5 - SF7BW125 to SF12BW125
678 +)))
597 597  
680 +(((
598 598  507.7 - SF7BW125 to SF12BW125
682 +)))
599 599  
684 +(((
600 600  507.9 - SF7BW125 to SF12BW125
686 +)))
601 601  
688 +(((
602 602  508.1 - SF7BW125 to SF12BW125
690 +)))
603 603  
692 +(((
604 604  505.3 - SF12BW125 (RX2 downlink only)
694 +)))
605 605  
606 606  
607 607  
... ... @@ -628,110 +628,220 @@
628 628  
629 629  
630 630  
721 +
631 631  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
632 632  
724 +(((
633 633  (% style="color:blue" %)**Default Uplink channel:**
726 +)))
634 634  
728 +(((
635 635  923.2 - SF7BW125 to SF10BW125
730 +)))
636 636  
732 +(((
637 637  923.4 - SF7BW125 to SF10BW125
734 +)))
638 638  
736 +(((
737 +
738 +)))
639 639  
740 +(((
640 640  (% style="color:blue" %)**Additional Uplink Channel**:
742 +)))
641 641  
744 +(((
642 642  (OTAA mode, channel added by JoinAccept message)
746 +)))
643 643  
748 +(((
749 +
750 +)))
644 644  
752 +(((
645 645  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
754 +)))
646 646  
756 +(((
647 647  922.2 - SF7BW125 to SF10BW125
758 +)))
648 648  
760 +(((
649 649  922.4 - SF7BW125 to SF10BW125
762 +)))
650 650  
764 +(((
651 651  922.6 - SF7BW125 to SF10BW125
766 +)))
652 652  
768 +(((
653 653  922.8 - SF7BW125 to SF10BW125
770 +)))
654 654  
772 +(((
655 655  923.0 - SF7BW125 to SF10BW125
774 +)))
656 656  
776 +(((
657 657  922.0 - SF7BW125 to SF10BW125
778 +)))
658 658  
780 +(((
781 +
782 +)))
659 659  
784 +(((
660 660  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
786 +)))
661 661  
788 +(((
662 662  923.6 - SF7BW125 to SF10BW125
790 +)))
663 663  
792 +(((
664 664  923.8 - SF7BW125 to SF10BW125
794 +)))
665 665  
796 +(((
666 666  924.0 - SF7BW125 to SF10BW125
798 +)))
667 667  
800 +(((
668 668  924.2 - SF7BW125 to SF10BW125
802 +)))
669 669  
804 +(((
670 670  924.4 - SF7BW125 to SF10BW125
806 +)))
671 671  
808 +(((
672 672  924.6 - SF7BW125 to SF10BW125
810 +)))
673 673  
812 +(((
813 +
814 +)))
674 674  
816 +(((
675 675  (% style="color:blue" %)**Downlink:**
818 +)))
676 676  
820 +(((
677 677  Uplink channels 1-8 (RX1)
822 +)))
678 678  
824 +(((
679 679  923.2 - SF10BW125 (RX2)
826 +)))
680 680  
681 681  
682 682  
683 683  === 2.8.6 KR920-923 (KR920) ===
684 684  
832 +(((
685 685  (% style="color:blue" %)**Default channel:**
834 +)))
686 686  
836 +(((
687 687  922.1 - SF7BW125 to SF12BW125
838 +)))
688 688  
840 +(((
689 689  922.3 - SF7BW125 to SF12BW125
842 +)))
690 690  
844 +(((
691 691  922.5 - SF7BW125 to SF12BW125
846 +)))
692 692  
848 +(((
849 +
850 +)))
693 693  
852 +(((
694 694  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
854 +)))
695 695  
856 +(((
696 696  922.1 - SF7BW125 to SF12BW125
858 +)))
697 697  
860 +(((
698 698  922.3 - SF7BW125 to SF12BW125
862 +)))
699 699  
864 +(((
700 700  922.5 - SF7BW125 to SF12BW125
866 +)))
701 701  
868 +(((
702 702  922.7 - SF7BW125 to SF12BW125
870 +)))
703 703  
872 +(((
704 704  922.9 - SF7BW125 to SF12BW125
874 +)))
705 705  
876 +(((
706 706  923.1 - SF7BW125 to SF12BW125
878 +)))
707 707  
880 +(((
708 708  923.3 - SF7BW125 to SF12BW125
882 +)))
709 709  
884 +(((
885 +
886 +)))
710 710  
888 +(((
711 711  (% style="color:blue" %)**Downlink:**
890 +)))
712 712  
892 +(((
713 713  Uplink channels 1-7(RX1)
894 +)))
714 714  
896 +(((
715 715  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
898 +)))
716 716  
717 717  
718 718  
719 719  === 2.8.7 IN865-867 (IN865) ===
720 720  
904 +(((
721 721  (% style="color:blue" %)**Uplink:**
906 +)))
722 722  
908 +(((
723 723  865.0625 - SF7BW125 to SF12BW125
910 +)))
724 724  
912 +(((
725 725  865.4025 - SF7BW125 to SF12BW125
914 +)))
726 726  
916 +(((
727 727  865.9850 - SF7BW125 to SF12BW125
918 +)))
728 728  
920 +(((
921 +
922 +)))
729 729  
924 +(((
730 730  (% style="color:blue" %)**Downlink:**
926 +)))
731 731  
928 +(((
732 732  Uplink channels 1-3 (RX1)
930 +)))
733 733  
932 +(((
734 734  866.550 - SF10BW125 (RX2)
934 +)))
735 735  
736 736  
737 737  
... ... @@ -744,6 +744,7 @@
744 744  
745 745  
746 746  
947 +
747 747  == 2.10 ​Firmware Change Log ==
748 748  
749 749  
... ... @@ -758,26 +758,51 @@
758 758  
759 759  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
760 760  
962 +(((
761 761  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
964 +)))
762 762  
763 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
764 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
966 +* (((
967 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
968 +)))
969 +* (((
970 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
971 +)))
765 765  
973 +(((
766 766  There are two kinds of commands to configure LSPH01, they are:
975 +)))
767 767  
768 -* (% style="color:#4f81bd" %)** General Commands**.
977 +* (((
978 +(% style="color:#4f81bd" %)** General Commands**.
979 +)))
769 769  
981 +(((
770 770  These commands are to configure:
983 +)))
771 771  
772 -* General system settings like: uplink interval.
773 -* LoRaWAN protocol & radio related command.
985 +* (((
986 +General system settings like: uplink interval.
987 +)))
988 +* (((
989 +LoRaWAN protocol & radio related command.
990 +)))
774 774  
992 +(((
775 775  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
994 +)))
776 776  
996 +(((
997 +
998 +)))
777 777  
778 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
1000 +* (((
1001 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
1002 +)))
779 779  
1004 +(((
780 780  These commands only valid for LSPH01, as below:
1006 +)))
781 781  
782 782  
783 783  
... ... @@ -790,19 +790,28 @@
790 790  [[image:image-20220607171554-8.png]]
791 791  
792 792  
793 -
1019 +(((
794 794  (% style="color:#037691" %)**Downlink Command: 0x01**
1021 +)))
795 795  
1023 +(((
796 796  Format: Command Code (0x01) followed by 3 bytes time value.
1025 +)))
797 797  
1027 +(((
798 798  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1029 +)))
799 799  
800 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
801 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1031 +* (((
1032 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1033 +)))
1034 +* (((
1035 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
802 802  
803 803  
1038 +
1039 +)))
804 804  
805 -
806 806  == 3.2 Set Interrupt Mode ==
807 807  
808 808  Feature, Set Interrupt mode for GPIO_EXIT.
... ... @@ -809,22 +809,37 @@
809 809  
810 810  (% style="color:#037691" %)**AT Command: AT+INTMOD**
811 811  
812 -[[image:image-20220607171716-9.png]]
1047 +[[image:image-20220610105907-1.png]]
813 813  
814 814  
1050 +(((
815 815  (% style="color:#037691" %)**Downlink Command: 0x06**
1052 +)))
816 816  
1054 +(((
817 817  Format: Command Code (0x06) followed by 3 bytes.
1056 +)))
818 818  
1058 +(((
819 819  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1060 +)))
820 820  
821 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
822 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1062 +* (((
1063 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1064 +)))
1065 +* (((
1066 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1067 +)))
823 823  
1069 +(((
1070 +
1071 +)))
824 824  
1073 +
1074 +
825 825  == 3.3 Calibrate Sensor ==
826 826  
827 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1077 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
828 828  
829 829  
830 830  
... ... @@ -839,7 +839,6 @@
839 839  * Reply to the confirmation package: 26 01
840 840  * Reply to non-confirmed packet: 26 00
841 841  
842 -
843 843  Device will send an uplink after got this downlink command. With below payload:
844 844  
845 845  Configures info payload:
... ... @@ -857,14 +857,14 @@
857 857  
858 858  Version
859 859  )))|Sensor Type|Reserve|(((
860 -[[Message Type>>path:#H2.3.6MessageType]]
1109 +[[Message Type>>||anchor="H2.3.6MessageType"]]
861 861  Always 0x02
862 862  )))
863 863  
864 -**Software Type**: Always 0x03 for LSPH01
1113 +(% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LSPH01
865 865  
866 866  
867 -**Frequency Band**:
1116 +(% style="color:#037691" %)**Frequency Band**:
868 868  
869 869  *0x01: EU868
870 870  
... ... @@ -887,13 +887,13 @@
887 887  *0xa0: AS923-3
888 888  
889 889  
890 -**Sub-Band**: value 0x00 ~~ 0x08
1139 +(% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08
891 891  
892 892  
893 -**Firmware Version**: 0x0100, Means: v1.0.0 version
1142 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
894 894  
895 895  
896 -**Sensor Type**:
1145 +(% style="color:#037691" %)**Sensor Type**:
897 897  
898 898  0x01: LSE01
899 899  
... ... @@ -920,7 +920,7 @@
920 920  )))
921 921  
922 922  (((
923 -The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1172 +The discharge curve is not linear so can't simply use percentage to show the battery level. Below is the battery performance.
924 924  )))
925 925  
926 926  [[image:1654593587246-335.png]]
... ... @@ -955,12 +955,12 @@
955 955  )))
956 956  
957 957  
958 -**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
1207 +(% style="color:red" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
959 959  
960 960  [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
961 961  
962 962  
963 -**Step 2**: Open it and choose
1212 +(% style="color:#037691" %)**Step 2**(%%): Open it and choose
964 964  
965 965  * Product Model
966 966  * Uplink Interval
... ... @@ -974,13 +974,13 @@
974 974  The battery related documents as below:
975 975  
976 976  * (((
977 -[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
1226 +[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
978 978  )))
979 979  * (((
980 980  [[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
981 981  )))
982 982  * (((
983 -[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
1232 +[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
984 984  )))
985 985  
986 986  [[image:image-20220607172042-11.png]]
... ... @@ -997,9 +997,13 @@
997 997  
998 998  === ​4.3.2 Replace the battery ===
999 999  
1000 -You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1249 +(((
1250 +You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
1251 +)))
1001 1001  
1253 +(((
1002 1002  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1255 +)))
1003 1003  
1004 1004  
1005 1005  
... ... @@ -1020,29 +1020,29 @@
1020 1020  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1021 1021  
1022 1022  
1276 +(((
1023 1023  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1278 +)))
1024 1024  
1025 1025  
1026 1026   [[image:1654593712276-618.png]]
1027 1027  
1028 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1283 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1029 1029  
1030 1030  
1031 -
1032 1032  = 6. FAQ =
1033 1033  
1034 1034  == 6.1 How to change the LoRa Frequency Bands/Region ==
1035 1035  
1036 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1290 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1037 1037  When downloading the images, choose the required image file for download. ​
1038 1038  
1039 1039  
1040 -
1041 1041  = 7. Trouble Shooting =
1042 1042  
1043 -== 7.1 AT Commands input doesn’t work ==
1296 +== 7.1 AT Commands input doesn't work ==
1044 1044  
1045 -In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1298 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1046 1046  
1047 1047  
1048 1048  
image-20220610105907-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +15.5 KB
Content