Changes for page LSPH01 -- LoRaWAN Soil pH Sensor User Manual

Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 1 added, 0 removed)
  • image-20220610105907-1.png

Details

Page properties

Content

...	...	@@ -4,7 +4,7 @@
4	4
5	5
6	6
7		-**Contents:**
	7	+**Table of Contents:**
8	8
9	9	* [[1. Introduction>>path:#H1.Introduction]]
10	10	** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
...	...	@@ -64,23 +64,31 @@
64	64
65	65
66	66
67		-
68		-
69		-
70		-
71	71	= 1. Introduction =
72	72
73	73	== 1.1 ​What is LoRaWAN Soil pH Sensor ==
74	74
	71	+(((
	72	+
	73	+
75	75	The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
	75	+)))
76	76
	77	+(((
77	77	LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
	79	+)))
78	78
	81	+(((
79	79	The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
	83	+)))
80	80
	85	+(((
81	81	LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
	87	+)))
82	82
	89	+(((
83	83	Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	91	+)))
84	84
85	85
86	86	[[image:1654592435432-887.png]]
...	...	@@ -87,6 +87,7 @@
87	87
88	88
89	89
	98	+
90	90	== ​1.2 Features ==
91	91
92	92	* LoRaWAN 1.0.3 Class A
...	...	@@ -105,6 +105,7 @@
105	105
106	106
107	107
	117	+
108	108	== 1.3 Probe Specification ==
109	109
110	110
...	...	@@ -117,6 +117,7 @@
117	117	* IP68 Protection
118	118	* Length: 3.5 meters
119	119
	130	+
120	120	(% style="color:#4f81bd" %)**Soil Temperature:**
121	121
122	122	* Range -40℃～85℃
...	...	@@ -127,6 +127,7 @@
127	127
128	128
129	129
	141	+
130	130	== 1.4 ​Applications ==
131	131
132	132	* Smart Agriculture
...	...	@@ -133,6 +133,7 @@
133	133
134	134
135	135
	148	+
136	136	== 1.5 Pin mapping and power on ==
137	137
138	138	[[image:1654592472094-134.png]]
...	...	@@ -148,7 +148,7 @@
148	148	)))
149	149
150	150	(((
151		-In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
	164	+In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
152	152	)))
153	153
154	154
...	...	@@ -211,7 +211,9 @@
211	211	[[image:image-20220607170442-2.png]]
212	212
213	213
	227	+(((
214	214	(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	229	+)))
215	215
216	216	[[image:1654592697690-910.png]]
217	217
...	...	@@ -219,26 +219,30 @@
219	219
220	220	== 2.3 ​Uplink Payload ==
221	221
	237	+(((
222	222	LSPH01 will uplink payload via LoRaWAN with below payload format:
	239	+)))
223	223
	241	+(((
224	224	Uplink payload includes in total 11 bytes.
	243	+)))
225	225
	245	+(((
226	226	Normal uplink payload:
	247	+)))
227	227
228	228	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
229		-|(((
230		-**Size**
	250	+|=(% style="width: 62.5px;" %)(((
	251	+**Size (bytes)**
	252	+)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
	253	+|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
	254	+[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
231	231
232		-**(bytes)**
233		-)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
234		-|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
235		-[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
236		-
237		-[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
238		-)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
239		-[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
	256	+[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
	257	+)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
	258	+[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
240	240	)))|Reserve|(((
241		-[[Message Type>>path:#H2.3.6MessageType]]
	260	+[[Message Type>>||anchor="H2.3.6MessageType"]]
242	242	)))
243	243
244	244	[[image:1654592721645-318.png]]
...	...	@@ -294,7 +294,7 @@
294	294
295	295	=== 2.3.5 Interrupt Pin ===
296	296
297		-This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
	316	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
298	298
299	299
300	300	**Example:**
...	...	@@ -307,20 +307,21 @@
307	307
308	308	=== 2.3.6 Message Type ===
309	309
	329	+(((
310	310	For a normal uplink payload, the message type is always 0x01.
	331	+)))
311	311
	333	+(((
312	312	Valid Message Type:
	335	+)))
313	313
314	314
315		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
316		-|**Message Type Code**|**Description**|**Payload**
317		-|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
318		-|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
319		-|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
	338	+(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
	339	+|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
	340	+|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
	341	+|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
	342	+|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
320	320
321		-
322		-
323		-
324	324	=== 2.3.7 Decode payload in The Things Network ===
325	325
326	326	While using TTN network, you can add the payload format to decode the payload.
...	...	@@ -340,18 +340,27 @@
340	340
341	341	== 2.4 Uplink Interval ==
342	342
343		-The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
	363	+The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
344	344
345	345
346	346
347	347	== 2.5 ​Show Data in DataCake IoT Server ==
348	348
	369	+(((
349	349	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
	371	+)))
350	350
	373	+(((
	374	+
	375	+)))
351	351
	377	+(((
352	352	(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
	379	+)))
353	353
	381	+(((
354	354	(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
	383	+)))
355	355
356	356
357	357	[[image:1654592790040-760.png]]
...	...	@@ -374,9 +374,13 @@
374	374	[[image:1654592856403-259.png]]
375	375
376	376
	406	+(((
377	377	(% style="color:blue" %)**Step 5**(%%)**: add payload decode**
	408	+)))
378	378
	410	+(((
379	379	Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
	412	+)))
380	380
381	381
382	382	[[image:1654592878525-845.png]]
...	...	@@ -399,8 +399,10 @@
399	399	=== 2.6.1 Before measurement ===
400	400
401	401	(((
	435	+(((
402	402	If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.
403	403	)))
	438	+)))
404	404
405	405
406	406
...	...	@@ -407,24 +407,45 @@
407	407	=== 2.6.2 Measurement ===
408	408
409	409
	445	+(((
410	410	(% style="color:#4f81bd" %)**Measurement the soil surface:**
	447	+)))
411	411
	449	+(((
412	412	[[image:1654592946732-634.png]]
	451	+)))
413	413
	453	+(((
414	414	Choose the proper measuring position. Split the surface soil according to the measured deep.
	455	+)))
415	415
	457	+(((
416	416	Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
	459	+)))
417	417
	461	+(((
418	418	Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
	463	+)))
419	419
	465	+(((
420	420	Put soil over the probe after insert. And start to measure.
	467	+)))
421	421
	469	+(((
	470	+
	471	+)))
422	422
	473	+(((
423	423	(% style="color:#4f81bd" %)**Measurement inside soil:**
	475	+)))
424	424
	477	+(((
425	425	Dig a hole with diameter > 20CM.
	479	+)))
426	426
	481	+(((
427	427	Insert the probe inside, method like measure the surface.
	483	+)))
428	428
429	429
430	430
...	...	@@ -454,9 +454,13 @@
454	454
455	455	== 2.7 Calibration ==
456	456
	513	+(((
457	457	User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
	515	+)))
458	458
	517	+(((
459	459	After stable, user can use below command to calibrate.
	519	+)))
460	460
461	461	[[image:image-20220607171149-4.png]]
462	462
...	...	@@ -463,12 +463,10 @@
463	463
464	464	(% style="color:#037691" %)**Calibration Payload**
465	465
466		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
467		-|(((
468		-**Size**
469		-
470		-**(bytes)**
471		-)))|**1**|**1**|**1**|**7**|**1**
	526	+(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
	527	+|=(% style="width: 62.5px;" %)(((
	528	+**Size (bytes)**
	529	+)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
472	472	|**Value**|(((
473	473	PH4
474	474
...	...	@@ -478,7 +478,7 @@
478	478
479	479	Calibrate value
480	480	)))|Reserve|(((
481		-[[Message Type>>path:#H2.3.6MessageType]]
	539	+[[Message Type>>||anchor="H2.3.6MessageType"]]
482	482
483	483	Always 0x03
484	484	)))
...	...	@@ -492,8 +492,6 @@
492	492	* Reply to non-confirmed packet: 14 00
493	493
494	494
495		-
496		-
497	497	== 2.8 Frequency Plans ==
498	498
499	499	(((
...	...	@@ -503,32 +503,61 @@
503	503
504	504	=== 2.8.1 EU863-870 (EU868) ===
505	505
	562	+(((
506	506	(% style="color:blue" %)**Uplink:**
	564	+)))
507	507
	566	+(((
508	508	868.1 - SF7BW125 to SF12BW125
	568	+)))
509	509
	570	+(((
510	510	868.3 - SF7BW125 to SF12BW125 and SF7BW250
	572	+)))
511	511
	574	+(((
512	512	868.5 - SF7BW125 to SF12BW125
	576	+)))
513	513
	578	+(((
514	514	867.1 - SF7BW125 to SF12BW125
	580	+)))
515	515
	582	+(((
516	516	867.3 - SF7BW125 to SF12BW125
	584	+)))
517	517
	586	+(((
518	518	867.5 - SF7BW125 to SF12BW125
	588	+)))
519	519
	590	+(((
520	520	867.7 - SF7BW125 to SF12BW125
	592	+)))
521	521
	594	+(((
522	522	867.9 - SF7BW125 to SF12BW125
	596	+)))
523	523
	598	+(((
524	524	868.8 - FSK
	600	+)))
525	525
	602	+(((
	603	+
	604	+)))
526	526
	606	+(((
527	527	(% style="color:blue" %)**Downlink:**
	608	+)))
528	528
	610	+(((
529	529	Uplink channels 1-9 (RX1)
	612	+)))
530	530
	614	+(((
531	531	869.525 - SF9BW125 (RX2 downlink only)
	616	+)))
532	532
533	533
534	534
...	...	@@ -552,46 +552,89 @@
552	552
553	553	=== 2.8.3 CN470-510 (CN470) ===
554	554
	640	+(((
555	555	Used in China, Default use CHE=1
	642	+)))
556	556
	644	+(((
557	557	(% style="color:blue" %)**Uplink:**
	646	+)))
558	558
	648	+(((
559	559	486.3 - SF7BW125 to SF12BW125
	650	+)))
560	560
	652	+(((
561	561	486.5 - SF7BW125 to SF12BW125
	654	+)))
562	562
	656	+(((
563	563	486.7 - SF7BW125 to SF12BW125
	658	+)))
564	564
	660	+(((
565	565	486.9 - SF7BW125 to SF12BW125
	662	+)))
566	566
	664	+(((
567	567	487.1 - SF7BW125 to SF12BW125
	666	+)))
568	568
	668	+(((
569	569	487.3 - SF7BW125 to SF12BW125
	670	+)))
570	570
	672	+(((
571	571	487.5 - SF7BW125 to SF12BW125
	674	+)))
572	572
	676	+(((
573	573	487.7 - SF7BW125 to SF12BW125
	678	+)))
574	574
	680	+(((
	681	+
	682	+)))
575	575
	684	+(((
576	576	(% style="color:blue" %)**Downlink:**
	686	+)))
577	577
	688	+(((
578	578	506.7 - SF7BW125 to SF12BW125
	690	+)))
579	579
	692	+(((
580	580	506.9 - SF7BW125 to SF12BW125
	694	+)))
581	581
	696	+(((
582	582	507.1 - SF7BW125 to SF12BW125
	698	+)))
583	583
	700	+(((
584	584	507.3 - SF7BW125 to SF12BW125
	702	+)))
585	585
	704	+(((
586	586	507.5 - SF7BW125 to SF12BW125
	706	+)))
587	587
	708	+(((
588	588	507.7 - SF7BW125 to SF12BW125
	710	+)))
589	589
	712	+(((
590	590	507.9 - SF7BW125 to SF12BW125
	714	+)))
591	591
	716	+(((
592	592	508.1 - SF7BW125 to SF12BW125
	718	+)))
593	593
	720	+(((
594	594	505.3 - SF12BW125 (RX2 downlink only)
	722	+)))
595	595
596	596
597	597
...	...	@@ -616,112 +616,219 @@
616	616	* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
617	617	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
618	618
619		-
620		-
621	621	=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
622	622
	749	+(((
623	623	(% style="color:blue" %)**Default Uplink channel:**
	751	+)))
624	624
	753	+(((
625	625	923.2 - SF7BW125 to SF10BW125
	755	+)))
626	626
	757	+(((
627	627	923.4 - SF7BW125 to SF10BW125
	759	+)))
628	628
	761	+(((
	762	+
	763	+)))
629	629
	765	+(((
630	630	(% style="color:blue" %)**Additional Uplink Channel**:
	767	+)))
631	631
	769	+(((
632	632	(OTAA mode, channel added by JoinAccept message)
	771	+)))
633	633
	773	+(((
	774	+
	775	+)))
634	634
	777	+(((
635	635	(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
	779	+)))
636	636
	781	+(((
637	637	922.2 - SF7BW125 to SF10BW125
	783	+)))
638	638
	785	+(((
639	639	922.4 - SF7BW125 to SF10BW125
	787	+)))
640	640
	789	+(((
641	641	922.6 - SF7BW125 to SF10BW125
	791	+)))
642	642
	793	+(((
643	643	922.8 - SF7BW125 to SF10BW125
	795	+)))
644	644
	797	+(((
645	645	923.0 - SF7BW125 to SF10BW125
	799	+)))
646	646
	801	+(((
647	647	922.0 - SF7BW125 to SF10BW125
	803	+)))
648	648
	805	+(((
	806	+
	807	+)))
649	649
	809	+(((
650	650	(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
	811	+)))
651	651
	813	+(((
652	652	923.6 - SF7BW125 to SF10BW125
	815	+)))
653	653
	817	+(((
654	654	923.8 - SF7BW125 to SF10BW125
	819	+)))
655	655
	821	+(((
656	656	924.0 - SF7BW125 to SF10BW125
	823	+)))
657	657
	825	+(((
658	658	924.2 - SF7BW125 to SF10BW125
	827	+)))
659	659
	829	+(((
660	660	924.4 - SF7BW125 to SF10BW125
	831	+)))
661	661
	833	+(((
662	662	924.6 - SF7BW125 to SF10BW125
	835	+)))
663	663
	837	+(((
	838	+
	839	+)))
664	664
	841	+(((
665	665	(% style="color:blue" %)**Downlink:**
	843	+)))
666	666
	845	+(((
667	667	Uplink channels 1-8 (RX1)
	847	+)))
668	668
	849	+(((
669	669	923.2 - SF10BW125 (RX2)
	851	+)))
670	670
671	671
672	672
673	673	=== 2.8.6 KR920-923 (KR920) ===
674	674
	857	+(((
675	675	(% style="color:blue" %)**Default channel:**
	859	+)))
676	676
	861	+(((
677	677	922.1 - SF7BW125 to SF12BW125
	863	+)))
678	678
	865	+(((
679	679	922.3 - SF7BW125 to SF12BW125
	867	+)))
680	680
	869	+(((
681	681	922.5 - SF7BW125 to SF12BW125
	871	+)))
682	682
	873	+(((
	874	+
	875	+)))
683	683
	877	+(((
684	684	(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
	879	+)))
685	685
	881	+(((
686	686	922.1 - SF7BW125 to SF12BW125
	883	+)))
687	687
	885	+(((
688	688	922.3 - SF7BW125 to SF12BW125
	887	+)))
689	689
	889	+(((
690	690	922.5 - SF7BW125 to SF12BW125
	891	+)))
691	691
	893	+(((
692	692	922.7 - SF7BW125 to SF12BW125
	895	+)))
693	693
	897	+(((
694	694	922.9 - SF7BW125 to SF12BW125
	899	+)))
695	695
	901	+(((
696	696	923.1 - SF7BW125 to SF12BW125
	903	+)))
697	697
	905	+(((
698	698	923.3 - SF7BW125 to SF12BW125
	907	+)))
699	699
	909	+(((
	910	+
	911	+)))
700	700
	913	+(((
701	701	(% style="color:blue" %)**Downlink:**
	915	+)))
702	702
	917	+(((
703	703	Uplink channels 1-7(RX1)
	919	+)))
704	704
	921	+(((
705	705	921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
	923	+)))
706	706
707	707
708	708
709	709	=== 2.8.7 IN865-867 (IN865) ===
710	710
	929	+(((
711	711	(% style="color:blue" %)**Uplink:**
	931	+)))
712	712
	933	+(((
713	713	865.0625 - SF7BW125 to SF12BW125
	935	+)))
714	714
	937	+(((
715	715	865.4025 - SF7BW125 to SF12BW125
	939	+)))
716	716
	941	+(((
717	717	865.9850 - SF7BW125 to SF12BW125
	943	+)))
718	718
	945	+(((
	946	+
	947	+)))
719	719
	949	+(((
720	720	(% style="color:blue" %)**Downlink:**
	951	+)))
721	721
	953	+(((
722	722	Uplink channels 1-3 (RX1)
	955	+)))
723	723
	957	+(((
724	724	866.550 - SF10BW125 (RX2)
	959	+)))
725	725
726	726
727	727
...	...	@@ -732,8 +732,6 @@
732	732	* The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
733	733	* Blink once when device transmit a packet.
734	734
735		-
736		-
737	737	== 2.10 ​Firmware Change Log ==
738	738
739	739
...	...	@@ -748,26 +748,51 @@
748	748
749	749	= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
750	750
	984	+(((
751	751	Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
	986	+)))
752	752
753		-* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
754		-* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	988	+* (((
	989	+AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
	990	+)))
	991	+* (((
	992	+LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	993	+)))
755	755
	995	+(((
756	756	There are two kinds of commands to configure LSPH01, they are:
	997	+)))
757	757
758		-* (% style="color:#4f81bd" %)** General Commands**.
	999	+* (((
	1000	+(% style="color:#4f81bd" %)** General Commands**.
	1001	+)))
759	759
	1003	+(((
760	760	These commands are to configure:
	1005	+)))
761	761
762		-* General system settings like: uplink interval.
763		-* LoRaWAN protocol & radio related command.
	1007	+* (((
	1008	+General system settings like: uplink interval.
	1009	+)))
	1010	+* (((
	1011	+LoRaWAN protocol & radio related command.
	1012	+)))
764	764
	1014	+(((
765	765	They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	1016	+)))
766	766
	1018	+(((
	1019	+
	1020	+)))
767	767
768		-* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1022	+* (((
	1023	+(% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1024	+)))
769	769
	1026	+(((
770	770	These commands only valid for LSPH01, as below:
	1028	+)))
771	771
772	772
773	773
...	...	@@ -781,18 +781,28 @@
781	781
782	782
783	783
	1042	+(((
784	784	(% style="color:#037691" %)**Downlink Command: 0x01**
	1044	+)))
785	785
	1046	+(((
786	786	Format: Command Code (0x01) followed by 3 bytes time value.
	1048	+)))
787	787
	1050	+(((
788	788	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	1052	+)))
789	789
790		-* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
791		-* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	1054	+* (((
	1055	+Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	1056	+)))
	1057	+* (((
	1058	+Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
792	792
793	793
	1061	+
	1062	+)))
794	794
795		-
796	796	== 3.2 Set Interrupt Mode ==
797	797
798	798	Feature, Set Interrupt mode for GPIO_EXIT.
...	...	@@ -799,22 +799,37 @@
799	799
800	800	(% style="color:#037691" %)**AT Command: AT+INTMOD**
801	801
802		-[[image:image-20220607171716-9.png]]
	1070	+[[image:image-20220610105907-1.png]]
803	803
804	804
	1073	+(((
805	805	(% style="color:#037691" %)**Downlink Command: 0x06**
	1075	+)))
806	806
	1077	+(((
807	807	Format: Command Code (0x06) followed by 3 bytes.
	1079	+)))
808	808
	1081	+(((
809	809	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
	1083	+)))
810	810
811		-* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
812		-* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1085	+* (((
	1086	+Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
	1087	+)))
	1088	+* (((
	1089	+Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1090	+)))
813	813
	1092	+(((
	1093	+
	1094	+)))
814	814
	1096	+
	1097	+
815	815	== 3.3 Calibrate Sensor ==
816	816
817		-Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
	1100	+Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
818	818
819	819
820	820
...	...	@@ -829,7 +829,6 @@
829	829	* Reply to the confirmation package: 26 01
830	830	* Reply to non-confirmed packet: 26 00
831	831
832		-
833	833	Device will send an uplink after got this downlink command. With below payload:
834	834
835	835	Configures info payload:
...	...	@@ -847,7 +847,7 @@
847	847
848	848	Version
849	849	)))|Sensor Type|Reserve|(((
850		-[[Message Type>>path:#H2.3.6MessageType]]
	1132	+[[Message Type>>||anchor="H2.3.6MessageType"]]
851	851	Always 0x02
852	852	)))
853	853
...	...	@@ -987,9 +987,13 @@
987	987
988	988	=== ​4.3.2 Replace the battery ===
989	989
	1272	+(((
990	990	You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
	1274	+)))
991	991
	1276	+(((
992	992	The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
	1278	+)))
993	993
994	994
995	995
...	...	@@ -1010,24 +1010,24 @@
1010	1010	(% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1011	1011
1012	1012
	1299	+(((
1013	1013	In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
	1301	+)))
1014	1014
1015	1015
1016	1016	[[image:1654593712276-618.png]]
1017	1017
1018		-Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
	1306	+Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1019	1019
1020	1020
1021		-
1022	1022	= 6. FAQ =
1023	1023
1024	1024	== 6.1 How to change the LoRa Frequency Bands/Region ==
1025	1025
1026		-You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
	1313	+You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1027	1027	When downloading the images, choose the required image file for download. ​
1028	1028
1029	1029
1030		-
1031	1031	= 7. Trouble Shooting =
1032	1032
1033	1033	== 7.1 AT Commands input doesn’t work ==
...	...	@@ -1052,7 +1052,6 @@
1052	1052	* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1053	1053	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1054	1054
1055		-
1056	1056	= 9. ​Packing Info =
1057	1057
1058	1058
...	...	@@ -1067,7 +1067,6 @@
1067	1067	* Package Size / pcs : cm
1068	1068	* Weight / pcs : g
1069	1069
1070		-
1071	1071	= 10. ​Support =
1072	1072
1073	1073	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

image-20220610105907-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+15.5 KB

Content