Last modified by Xiaoling on 2025/04/24 17:18
<
From version < 74.3 >
edited by Xiaoling
on 2022/06/07 17:47
To version < 87.3 >
edited by Xiaoling
on 2022/06/10 09:56
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LSPH01-LoRaWAN Soil pH Sensor User Manual
1 +LLDS12-LoRaWAN LiDAR ToF Distance Sensor User Manual
Content
... ... @@ -1,65 +1,9 @@
1 1  (% style="text-align:center" %)
2 -[[image:1654592399090-860.png||height="521" width="483"]]
2 +[[image:image-20220610095606-1.png]]
3 3  
4 4  
5 -
6 -
7 7  **Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 65  
... ... @@ -66,7 +66,6 @@
66 66  
67 67  
68 68  
69 -
70 70  = 1. Introduction =
71 71  
72 72  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
... ... @@ -96,6 +96,7 @@
96 96  
97 97  
98 98  
42 +
99 99  == ​1.2 Features ==
100 100  
101 101  * LoRaWAN 1.0.3 Class A
... ... @@ -154,7 +154,7 @@
154 154  )))
155 155  
156 156  (((
157 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
101 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
158 158  )))
159 159  
160 160  
... ... @@ -240,19 +240,17 @@
240 240  )))
241 241  
242 242  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
243 -|(((
244 -**Size**
187 +|=(% style="width: 62.5px;" %)(((
188 +**Size (bytes)**
189 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
190 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
191 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
245 245  
246 -**(bytes)**
247 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
248 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
249 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
250 -
251 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
252 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
253 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
193 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
194 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
195 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
254 254  )))|Reserve|(((
255 -[[Message Type>>path:#H2.3.6MessageType]]
197 +[[Message Type>>||anchor="H2.3.6MessageType"]]
256 256  )))
257 257  
258 258  [[image:1654592721645-318.png]]
... ... @@ -308,7 +308,7 @@
308 308  
309 309  === 2.3.5 Interrupt Pin ===
310 310  
311 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
253 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
312 312  
313 313  
314 314  **Example:**
... ... @@ -330,14 +330,13 @@
330 330  )))
331 331  
332 332  
333 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
334 -|=**Message Type Code**|=**Description**|=**Payload**
335 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
336 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
337 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
275 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
276 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
277 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
278 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
279 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
338 338  
339 339  
340 -
341 341  === 2.3.7 Decode payload in The Things Network ===
342 342  
343 343  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -357,7 +357,7 @@
357 357  
358 358  == 2.4 Uplink Interval ==
359 359  
360 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
301 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
361 361  
362 362  
363 363  
... ... @@ -429,8 +429,10 @@
429 429  === 2.6.1 Before measurement ===
430 430  
431 431  (((
373 +(((
432 432  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
433 433  )))
376 +)))
434 434  
435 435  
436 436  
... ... @@ -437,24 +437,45 @@
437 437  === 2.6.2 Measurement ===
438 438  
439 439  
383 +(((
440 440  (% style="color:#4f81bd" %)**Measurement the soil surface:**
385 +)))
441 441  
387 +(((
442 442  [[image:1654592946732-634.png]]
389 +)))
443 443  
391 +(((
444 444  Choose the proper measuring position. Split the surface soil according to the measured deep.
393 +)))
445 445  
395 +(((
446 446  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
397 +)))
447 447  
399 +(((
448 448  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
401 +)))
449 449  
403 +(((
450 450  Put soil over the probe after insert. And start to measure.
405 +)))
451 451  
407 +(((
408 +
409 +)))
452 452  
411 +(((
453 453  (% style="color:#4f81bd" %)**Measurement inside soil:**
413 +)))
454 454  
415 +(((
455 455  Dig a hole with diameter > 20CM.
417 +)))
456 456  
419 +(((
457 457  Insert the probe inside, method like measure the surface.
421 +)))
458 458  
459 459  
460 460  
... ... @@ -484,9 +484,13 @@
484 484  
485 485  == 2.7 Calibration ==
486 486  
451 +(((
487 487  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
453 +)))
488 488  
455 +(((
489 489  After stable, user can use below command to calibrate.
457 +)))
490 490  
491 491  [[image:image-20220607171149-4.png]]
492 492  
... ... @@ -493,12 +493,10 @@
493 493  
494 494  (% style="color:#037691" %)**Calibration Payload**
495 495  
496 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
497 -|(((
498 -**Size**
499 -
500 -**(bytes)**
501 -)))|**1**|**1**|**1**|**7**|**1**
464 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
465 +|=(% style="width: 62.5px;" %)(((
466 +**Size (bytes)**
467 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
502 502  |**Value**|(((
503 503  PH4
504 504  
... ... @@ -508,7 +508,7 @@
508 508  
509 509  Calibrate value
510 510  )))|Reserve|(((
511 -[[Message Type>>path:#H2.3.6MessageType]]
477 +[[Message Type>>||anchor="H2.3.6MessageType"]]
512 512  
513 513  Always 0x03
514 514  )))
... ... @@ -532,32 +532,61 @@
532 532  
533 533  === 2.8.1 EU863-870 (EU868) ===
534 534  
501 +(((
535 535  (% style="color:blue" %)**Uplink:**
503 +)))
536 536  
505 +(((
537 537  868.1 - SF7BW125 to SF12BW125
507 +)))
538 538  
509 +(((
539 539  868.3 - SF7BW125 to SF12BW125 and SF7BW250
511 +)))
540 540  
513 +(((
541 541  868.5 - SF7BW125 to SF12BW125
515 +)))
542 542  
517 +(((
543 543  867.1 - SF7BW125 to SF12BW125
519 +)))
544 544  
521 +(((
545 545  867.3 - SF7BW125 to SF12BW125
523 +)))
546 546  
525 +(((
547 547  867.5 - SF7BW125 to SF12BW125
527 +)))
548 548  
529 +(((
549 549  867.7 - SF7BW125 to SF12BW125
531 +)))
550 550  
533 +(((
551 551  867.9 - SF7BW125 to SF12BW125
535 +)))
552 552  
537 +(((
553 553  868.8 - FSK
539 +)))
554 554  
541 +(((
542 +
543 +)))
555 555  
545 +(((
556 556  (% style="color:blue" %)**Downlink:**
547 +)))
557 557  
549 +(((
558 558  Uplink channels 1-9 (RX1)
551 +)))
559 559  
553 +(((
560 560  869.525 - SF9BW125 (RX2 downlink only)
555 +)))
561 561  
562 562  
563 563  
... ... @@ -578,48 +578,93 @@
578 578  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
579 579  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
580 580  
576 +
577 +
581 581  === 2.8.3 CN470-510 (CN470) ===
582 582  
580 +(((
583 583  Used in China, Default use CHE=1
582 +)))
584 584  
584 +(((
585 585  (% style="color:blue" %)**Uplink:**
586 +)))
586 586  
588 +(((
587 587  486.3 - SF7BW125 to SF12BW125
590 +)))
588 588  
592 +(((
589 589  486.5 - SF7BW125 to SF12BW125
594 +)))
590 590  
596 +(((
591 591  486.7 - SF7BW125 to SF12BW125
598 +)))
592 592  
600 +(((
593 593  486.9 - SF7BW125 to SF12BW125
602 +)))
594 594  
604 +(((
595 595  487.1 - SF7BW125 to SF12BW125
606 +)))
596 596  
608 +(((
597 597  487.3 - SF7BW125 to SF12BW125
610 +)))
598 598  
612 +(((
599 599  487.5 - SF7BW125 to SF12BW125
614 +)))
600 600  
616 +(((
601 601  487.7 - SF7BW125 to SF12BW125
618 +)))
602 602  
620 +(((
621 +
622 +)))
603 603  
624 +(((
604 604  (% style="color:blue" %)**Downlink:**
626 +)))
605 605  
628 +(((
606 606  506.7 - SF7BW125 to SF12BW125
630 +)))
607 607  
632 +(((
608 608  506.9 - SF7BW125 to SF12BW125
634 +)))
609 609  
636 +(((
610 610  507.1 - SF7BW125 to SF12BW125
638 +)))
611 611  
640 +(((
612 612  507.3 - SF7BW125 to SF12BW125
642 +)))
613 613  
644 +(((
614 614  507.5 - SF7BW125 to SF12BW125
646 +)))
615 615  
648 +(((
616 616  507.7 - SF7BW125 to SF12BW125
650 +)))
617 617  
652 +(((
618 618  507.9 - SF7BW125 to SF12BW125
654 +)))
619 619  
656 +(((
620 620  508.1 - SF7BW125 to SF12BW125
658 +)))
621 621  
660 +(((
622 622  505.3 - SF12BW125 (RX2 downlink only)
662 +)))
623 623  
624 624  
625 625  
... ... @@ -647,108 +647,217 @@
647 647  
648 648  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
649 649  
690 +(((
650 650  (% style="color:blue" %)**Default Uplink channel:**
692 +)))
651 651  
694 +(((
652 652  923.2 - SF7BW125 to SF10BW125
696 +)))
653 653  
698 +(((
654 654  923.4 - SF7BW125 to SF10BW125
700 +)))
655 655  
702 +(((
703 +
704 +)))
656 656  
706 +(((
657 657  (% style="color:blue" %)**Additional Uplink Channel**:
708 +)))
658 658  
710 +(((
659 659  (OTAA mode, channel added by JoinAccept message)
712 +)))
660 660  
714 +(((
715 +
716 +)))
661 661  
718 +(((
662 662  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
720 +)))
663 663  
722 +(((
664 664  922.2 - SF7BW125 to SF10BW125
724 +)))
665 665  
726 +(((
666 666  922.4 - SF7BW125 to SF10BW125
728 +)))
667 667  
730 +(((
668 668  922.6 - SF7BW125 to SF10BW125
732 +)))
669 669  
734 +(((
670 670  922.8 - SF7BW125 to SF10BW125
736 +)))
671 671  
738 +(((
672 672  923.0 - SF7BW125 to SF10BW125
740 +)))
673 673  
742 +(((
674 674  922.0 - SF7BW125 to SF10BW125
744 +)))
675 675  
746 +(((
747 +
748 +)))
676 676  
750 +(((
677 677  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
752 +)))
678 678  
754 +(((
679 679  923.6 - SF7BW125 to SF10BW125
756 +)))
680 680  
758 +(((
681 681  923.8 - SF7BW125 to SF10BW125
760 +)))
682 682  
762 +(((
683 683  924.0 - SF7BW125 to SF10BW125
764 +)))
684 684  
766 +(((
685 685  924.2 - SF7BW125 to SF10BW125
768 +)))
686 686  
770 +(((
687 687  924.4 - SF7BW125 to SF10BW125
772 +)))
688 688  
774 +(((
689 689  924.6 - SF7BW125 to SF10BW125
776 +)))
690 690  
778 +(((
779 +
780 +)))
691 691  
782 +(((
692 692  (% style="color:blue" %)**Downlink:**
784 +)))
693 693  
786 +(((
694 694  Uplink channels 1-8 (RX1)
788 +)))
695 695  
790 +(((
696 696  923.2 - SF10BW125 (RX2)
792 +)))
697 697  
698 698  
699 699  
700 700  === 2.8.6 KR920-923 (KR920) ===
701 701  
798 +(((
702 702  (% style="color:blue" %)**Default channel:**
800 +)))
703 703  
802 +(((
704 704  922.1 - SF7BW125 to SF12BW125
804 +)))
705 705  
806 +(((
706 706  922.3 - SF7BW125 to SF12BW125
808 +)))
707 707  
810 +(((
708 708  922.5 - SF7BW125 to SF12BW125
812 +)))
709 709  
814 +(((
815 +
816 +)))
710 710  
818 +(((
711 711  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
820 +)))
712 712  
822 +(((
713 713  922.1 - SF7BW125 to SF12BW125
824 +)))
714 714  
826 +(((
715 715  922.3 - SF7BW125 to SF12BW125
828 +)))
716 716  
830 +(((
717 717  922.5 - SF7BW125 to SF12BW125
832 +)))
718 718  
834 +(((
719 719  922.7 - SF7BW125 to SF12BW125
836 +)))
720 720  
838 +(((
721 721  922.9 - SF7BW125 to SF12BW125
840 +)))
722 722  
842 +(((
723 723  923.1 - SF7BW125 to SF12BW125
844 +)))
724 724  
846 +(((
725 725  923.3 - SF7BW125 to SF12BW125
848 +)))
726 726  
850 +(((
851 +
852 +)))
727 727  
854 +(((
728 728  (% style="color:blue" %)**Downlink:**
856 +)))
729 729  
858 +(((
730 730  Uplink channels 1-7(RX1)
860 +)))
731 731  
862 +(((
732 732  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
864 +)))
733 733  
734 734  
735 735  
736 736  === 2.8.7 IN865-867 (IN865) ===
737 737  
870 +(((
738 738  (% style="color:blue" %)**Uplink:**
872 +)))
739 739  
874 +(((
740 740  865.0625 - SF7BW125 to SF12BW125
876 +)))
741 741  
878 +(((
742 742  865.4025 - SF7BW125 to SF12BW125
880 +)))
743 743  
882 +(((
744 744  865.9850 - SF7BW125 to SF12BW125
884 +)))
745 745  
886 +(((
887 +
888 +)))
746 746  
890 +(((
747 747  (% style="color:blue" %)**Downlink:**
892 +)))
748 748  
894 +(((
749 749  Uplink channels 1-3 (RX1)
896 +)))
750 750  
898 +(((
751 751  866.550 - SF10BW125 (RX2)
900 +)))
752 752  
753 753  
754 754  
... ... @@ -774,26 +774,51 @@
774 774  
775 775  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
776 776  
926 +(((
777 777  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
928 +)))
778 778  
779 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
780 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
930 +* (((
931 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
932 +)))
933 +* (((
934 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
935 +)))
781 781  
937 +(((
782 782  There are two kinds of commands to configure LSPH01, they are:
939 +)))
783 783  
784 -* (% style="color:#4f81bd" %)** General Commands**.
941 +* (((
942 +(% style="color:#4f81bd" %)** General Commands**.
943 +)))
785 785  
945 +(((
786 786  These commands are to configure:
947 +)))
787 787  
788 -* General system settings like: uplink interval.
789 -* LoRaWAN protocol & radio related command.
949 +* (((
950 +General system settings like: uplink interval.
951 +)))
952 +* (((
953 +LoRaWAN protocol & radio related command.
954 +)))
790 790  
956 +(((
791 791  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
958 +)))
792 792  
960 +(((
961 +
962 +)))
793 793  
794 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
964 +* (((
965 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
966 +)))
795 795  
968 +(((
796 796  These commands only valid for LSPH01, as below:
970 +)))
797 797  
798 798  
799 799  
... ... @@ -807,16 +807,27 @@
807 807  
808 808  
809 809  
984 +(((
810 810  (% style="color:#037691" %)**Downlink Command: 0x01**
986 +)))
811 811  
988 +(((
812 812  Format: Command Code (0x01) followed by 3 bytes time value.
990 +)))
813 813  
992 +(((
814 814  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
994 +)))
815 815  
816 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
817 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
996 +* (((
997 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
998 +)))
999 +* (((
1000 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
818 818  
819 819  
1003 +
1004 +)))
820 820  
821 821  == 3.2 Set Interrupt Mode ==
822 822  
... ... @@ -827,18 +827,34 @@
827 827  [[image:image-20220607171716-9.png]]
828 828  
829 829  
1015 +(((
830 830  (% style="color:#037691" %)**Downlink Command: 0x06**
1017 +)))
831 831  
1019 +(((
832 832  Format: Command Code (0x06) followed by 3 bytes.
1021 +)))
833 833  
1023 +(((
834 834  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1025 +)))
835 835  
836 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
837 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1027 +* (((
1028 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1029 +)))
1030 +* (((
1031 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1032 +)))
838 838  
1034 +(((
1035 +
1036 +)))
1037 +
1038 +
1039 +
839 839  == 3.3 Calibrate Sensor ==
840 840  
841 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1042 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
842 842  
843 843  
844 844  
... ... @@ -870,7 +870,7 @@
870 870  
871 871  Version
872 872  )))|Sensor Type|Reserve|(((
873 -[[Message Type>>path:#H2.3.6MessageType]]
1074 +[[Message Type>>||anchor="H2.3.6MessageType"]]
874 874  Always 0x02
875 875  )))
876 876  
... ... @@ -1010,9 +1010,13 @@
1010 1010  
1011 1011  === ​4.3.2 Replace the battery ===
1012 1012  
1214 +(((
1013 1013  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1216 +)))
1014 1014  
1218 +(((
1015 1015  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1220 +)))
1016 1016  
1017 1017  
1018 1018  
... ... @@ -1033,24 +1033,24 @@
1033 1033  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1034 1034  
1035 1035  
1241 +(((
1036 1036  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1243 +)))
1037 1037  
1038 1038  
1039 1039   [[image:1654593712276-618.png]]
1040 1040  
1041 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1248 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1042 1042  
1043 1043  
1044 -
1045 1045  = 6. FAQ =
1046 1046  
1047 1047  == 6.1 How to change the LoRa Frequency Bands/Region ==
1048 1048  
1049 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1255 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1050 1050  When downloading the images, choose the required image file for download. ​
1051 1051  
1052 1052  
1053 -
1054 1054  = 7. Trouble Shooting =
1055 1055  
1056 1056  == 7.1 AT Commands input doesn’t work ==
1654826112831-311.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +257.0 KB
Content
image-20220610095606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +183.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0