Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1043,14 +1043,24 @@
1043	1043
1044	1044
1045	1045
	1046	+(((
1046	1046	(% style="color:#037691" %)**Downlink Command: 0x01**
	1048	+)))
1047	1047
	1050	+(((
1048	1048	Format: Command Code (0x01) followed by 3 bytes time value.
	1052	+)))
1049	1049
	1054	+(((
1050	1050	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	1056	+)))
1051	1051
1052		-* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1053		-* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	1058	+* (((
	1059	+Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	1060	+)))
	1061	+* (((
	1062	+Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	1063	+)))
1054	1054
1055	1055
1056	1056
...	...	@@ -1063,15 +1063,31 @@
1063	1063	[[image:image-20220607171716-9.png]]
1064	1064
1065	1065
	1076	+(((
1066	1066	(% style="color:#037691" %)**Downlink Command: 0x06**
	1078	+)))
1067	1067
	1080	+(((
1068	1068	Format: Command Code (0x06) followed by 3 bytes.
	1082	+)))
1069	1069
	1084	+(((
1070	1070	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
	1086	+)))
1071	1071
1072		-* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1073		-* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1088	+* (((
	1089	+Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
	1090	+)))
	1091	+* (((
	1092	+Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1093	+)))
1074	1074
	1095	+(((
	1096	+
	1097	+)))
	1098	+
	1099	+
	1100	+
1075	1075	== 3.3 Calibrate Sensor ==
1076	1076
1077	1077	Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands