Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -639,46 +639,89 @@
639	639
640	640	=== 2.8.3 CN470-510 (CN470) ===
641	641
	642	+(((
642	642	Used in China, Default use CHE=1
	644	+)))
643	643
	646	+(((
644	644	(% style="color:blue" %)**Uplink:**
	648	+)))
645	645
	650	+(((
646	646	486.3 - SF7BW125 to SF12BW125
	652	+)))
647	647
	654	+(((
648	648	486.5 - SF7BW125 to SF12BW125
	656	+)))
649	649
	658	+(((
650	650	486.7 - SF7BW125 to SF12BW125
	660	+)))
651	651
	662	+(((
652	652	486.9 - SF7BW125 to SF12BW125
	664	+)))
653	653
	666	+(((
654	654	487.1 - SF7BW125 to SF12BW125
	668	+)))
655	655
	670	+(((
656	656	487.3 - SF7BW125 to SF12BW125
	672	+)))
657	657
	674	+(((
658	658	487.5 - SF7BW125 to SF12BW125
	676	+)))
659	659
	678	+(((
660	660	487.7 - SF7BW125 to SF12BW125
	680	+)))
661	661
	682	+(((
	683	+
	684	+)))
662	662
	686	+(((
663	663	(% style="color:blue" %)**Downlink:**
	688	+)))
664	664
	690	+(((
665	665	506.7 - SF7BW125 to SF12BW125
	692	+)))
666	666
	694	+(((
667	667	506.9 - SF7BW125 to SF12BW125
	696	+)))
668	668
	698	+(((
669	669	507.1 - SF7BW125 to SF12BW125
	700	+)))
670	670
	702	+(((
671	671	507.3 - SF7BW125 to SF12BW125
	704	+)))
672	672
	706	+(((
673	673	507.5 - SF7BW125 to SF12BW125
	708	+)))
674	674
	710	+(((
675	675	507.7 - SF7BW125 to SF12BW125
	712	+)))
676	676
	714	+(((
677	677	507.9 - SF7BW125 to SF12BW125
	716	+)))
678	678
	718	+(((
679	679	508.1 - SF7BW125 to SF12BW125
	720	+)))
680	680
	722	+(((
681	681	505.3 - SF12BW125 (RX2 downlink only)
	724	+)))
682	682
683	683
684	684
...	...	@@ -814,56 +814,109 @@
814	814
815	815	=== 2.8.6 KR920-923 (KR920) ===
816	816
	860	+(((
817	817	(% style="color:blue" %)**Default channel:**
	862	+)))
818	818
	864	+(((
819	819	922.1 - SF7BW125 to SF12BW125
	866	+)))
820	820
	868	+(((
821	821	922.3 - SF7BW125 to SF12BW125
	870	+)))
822	822
	872	+(((
823	823	922.5 - SF7BW125 to SF12BW125
	874	+)))
824	824
	876	+(((
	877	+
	878	+)))
825	825
	880	+(((
826	826	(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
	882	+)))
827	827
	884	+(((
828	828	922.1 - SF7BW125 to SF12BW125
	886	+)))
829	829
	888	+(((
830	830	922.3 - SF7BW125 to SF12BW125
	890	+)))
831	831
	892	+(((
832	832	922.5 - SF7BW125 to SF12BW125
	894	+)))
833	833
	896	+(((
834	834	922.7 - SF7BW125 to SF12BW125
	898	+)))
835	835
	900	+(((
836	836	922.9 - SF7BW125 to SF12BW125
	902	+)))
837	837
	904	+(((
838	838	923.1 - SF7BW125 to SF12BW125
	906	+)))
839	839
	908	+(((
840	840	923.3 - SF7BW125 to SF12BW125
	910	+)))
841	841
	912	+(((
	913	+
	914	+)))
842	842
	916	+(((
843	843	(% style="color:blue" %)**Downlink:**
	918	+)))
844	844
	920	+(((
845	845	Uplink channels 1-7(RX1)
	922	+)))
846	846
	924	+(((
847	847	921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
	926	+)))
848	848
849	849
850	850
851	851	=== 2.8.7 IN865-867 (IN865) ===
852	852
	932	+(((
853	853	(% style="color:blue" %)**Uplink:**
	934	+)))
854	854
	936	+(((
855	855	865.0625 - SF7BW125 to SF12BW125
	938	+)))
856	856
	940	+(((
857	857	865.4025 - SF7BW125 to SF12BW125
	942	+)))
858	858
	944	+(((
859	859	865.9850 - SF7BW125 to SF12BW125
	946	+)))
860	860
	948	+(((
	949	+
	950	+)))
861	861
	952	+(((
862	862	(% style="color:blue" %)**Downlink:**
	954	+)))
863	863
	956	+(((
864	864	Uplink channels 1-3 (RX1)
	958	+)))
865	865
	960	+(((
866	866	866.550 - SF10BW125 (RX2)
	962	+)))
867	867
868	868
869	869
...	...	@@ -889,26 +889,51 @@
889	889
890	890	= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
891	891
	988	+(((
892	892	Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
	990	+)))
893	893
894		-* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
895		-* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	992	+* (((
	993	+AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
	994	+)))
	995	+* (((
	996	+LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	997	+)))
896	896
	999	+(((
897	897	There are two kinds of commands to configure LSPH01, they are:
	1001	+)))
898	898
899		-* (% style="color:#4f81bd" %)** General Commands**.
	1003	+* (((
	1004	+(% style="color:#4f81bd" %)** General Commands**.
	1005	+)))
900	900
	1007	+(((
901	901	These commands are to configure:
	1009	+)))
902	902
903		-* General system settings like: uplink interval.
904		-* LoRaWAN protocol & radio related command.
	1011	+* (((
	1012	+General system settings like: uplink interval.
	1013	+)))
	1014	+* (((
	1015	+LoRaWAN protocol & radio related command.
	1016	+)))
905	905
	1018	+(((
906	906	They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	1020	+)))
907	907
	1022	+(((
	1023	+
	1024	+)))
908	908
909		-* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1026	+* (((
	1027	+(% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1028	+)))
910	910
	1030	+(((
911	911	These commands only valid for LSPH01, as below:
	1032	+)))
912	912
913	913
914	914
...	...	@@ -922,14 +922,24 @@
922	922
923	923
924	924
	1046	+(((
925	925	(% style="color:#037691" %)**Downlink Command: 0x01**
	1048	+)))
926	926
	1050	+(((
927	927	Format: Command Code (0x01) followed by 3 bytes time value.
	1052	+)))
928	928
	1054	+(((
929	929	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	1056	+)))
930	930
931		-* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
932		-* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	1058	+* (((
	1059	+Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	1060	+)))
	1061	+* (((
	1062	+Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	1063	+)))
933	933
934	934
935	935
...	...	@@ -942,15 +942,31 @@
942	942	[[image:image-20220607171716-9.png]]
943	943
944	944
	1076	+(((
945	945	(% style="color:#037691" %)**Downlink Command: 0x06**
	1078	+)))
946	946
	1080	+(((
947	947	Format: Command Code (0x06) followed by 3 bytes.
	1082	+)))
948	948
	1084	+(((
949	949	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
	1086	+)))
950	950
951		-* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
952		-* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1088	+* (((
	1089	+Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
	1090	+)))
	1091	+* (((
	1092	+Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1093	+)))
953	953
	1095	+(((
	1096	+
	1097	+)))
	1098	+
	1099	+
	1100	+
954	954	== 3.3 Calibrate Sensor ==
955	955
956	956	Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
...	...	@@ -1125,9 +1125,13 @@
1125	1125
1126	1126	=== ​4.3.2 Replace the battery ===
1127	1127
	1275	+(((
1128	1128	You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
	1277	+)))
1129	1129
	1279	+(((
1130	1130	The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
	1281	+)))
1131	1131
1132	1132
1133	1133
...	...	@@ -1148,7 +1148,9 @@
1148	1148	(% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1149	1149
1150	1150
	1302	+(((
1151	1151	In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
	1304	+)))
1152	1152
1153	1153
1154	1154	[[image:1654593712276-618.png]]
...	...	@@ -1190,6 +1190,9 @@
1190	1190	* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1191	1191	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1192	1192
	1346	+
	1347	+
	1348	+
1193	1193	= 9. ​Packing Info =
1194	1194
1195	1195
...	...	@@ -1204,6 +1204,9 @@
1204	1204	* Package Size / pcs : cm
1205	1205	* Weight / pcs : g
1206	1206
	1363	+
	1364	+
	1365	+
1207	1207	= 10. ​Support =
1208	1208
1209	1209	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.