Last modified by Xiaoling on 2025/04/24 17:18
<
From version < 73.9 >
edited by Xiaoling
on 2022/06/07 17:31
To version < 87.2 >
edited by Xiaoling
on 2022/06/10 09:56
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LSPH01-LoRaWAN Soil pH Sensor User Manual
1 +LLDS12-LoRaWAN LiDAR ToF Distance Sensor User Manual
Content
... ... @@ -1,9 +1,7 @@
1 1  (% style="text-align:center" %)
2 -[[image:1654592399090-860.png||height="521" width="483"]]
2 +[[image:image-20220610095606-1.png]]
3 3  
4 4  
5 -
6 -
7 7  **Contents:**
8 8  
9 9  * [[1. Introduction>>path:#H1.Introduction]]
... ... @@ -65,22 +65,29 @@
65 65  
66 66  
67 67  
68 -
69 -
70 -
71 71  = 1. Introduction =
72 72  
73 73  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
74 74  
70 +(((
75 75  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
72 +)))
76 76  
74 +(((
77 77  LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
76 +)))
78 78  
78 +(((
79 79  The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
80 +)))
80 80  
82 +(((
81 81  LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
84 +)))
82 82  
86 +(((
83 83  Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
88 +)))
84 84  
85 85  
86 86  [[image:1654592435432-887.png]]
... ... @@ -87,6 +87,7 @@
87 87  
88 88  
89 89  
95 +
90 90  == ​1.2 Features ==
91 91  
92 92  * LoRaWAN 1.0.3 Class A
... ... @@ -104,7 +104,6 @@
104 104  * 8500mAh Battery for long term use
105 105  
106 106  
107 -
108 108  == 1.3 Probe Specification ==
109 109  
110 110  
... ... @@ -126,13 +126,11 @@
126 126  * Length: 3.5 meters
127 127  
128 128  
129 -
130 130  == 1.4 ​Applications ==
131 131  
132 132  * Smart Agriculture
133 133  
134 134  
135 -
136 136  == 1.5 Pin mapping and power on ==
137 137  
138 138  [[image:1654592472094-134.png]]
... ... @@ -148,7 +148,7 @@
148 148  )))
149 149  
150 150  (((
151 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
154 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
152 152  )))
153 153  
154 154  
... ... @@ -211,7 +211,9 @@
211 211  [[image:image-20220607170442-2.png]]
212 212  
213 213  
217 +(((
214 214  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
219 +)))
215 215  
216 216  [[image:1654592697690-910.png]]
217 217  
... ... @@ -219,26 +219,30 @@
219 219  
220 220  == 2.3 ​Uplink Payload ==
221 221  
227 +(((
222 222  LSPH01 will uplink payload via LoRaWAN with below payload format: 
229 +)))
223 223  
231 +(((
224 224  Uplink payload includes in total 11 bytes.
233 +)))
225 225  
235 +(((
226 226  Normal uplink payload:
237 +)))
227 227  
228 228  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
229 -|(((
230 -**Size**
240 +|=(% style="width: 62.5px;" %)(((
241 +**Size (bytes)**
242 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
243 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
244 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
231 231  
232 -**(bytes)**
233 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
234 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
235 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
236 -
237 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
238 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
239 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
246 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
247 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
248 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
240 240  )))|Reserve|(((
241 -[[Message Type>>path:#H2.3.6MessageType]]
250 +[[Message Type>>||anchor="H2.3.6MessageType"]]
242 242  )))
243 243  
244 244  [[image:1654592721645-318.png]]
... ... @@ -294,7 +294,7 @@
294 294  
295 295  === 2.3.5 Interrupt Pin ===
296 296  
297 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
306 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
298 298  
299 299  
300 300  **Example:**
... ... @@ -307,20 +307,22 @@
307 307  
308 308  === 2.3.6 Message Type ===
309 309  
319 +(((
310 310  For a normal uplink payload, the message type is always 0x01.
321 +)))
311 311  
323 +(((
312 312  Valid Message Type:
325 +)))
313 313  
314 314  
315 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
316 -|**Message Type Code**|**Description**|**Payload**
317 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
318 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
319 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
328 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
329 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
330 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
331 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
332 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
320 320  
321 321  
322 -
323 -
324 324  === 2.3.7 Decode payload in The Things Network ===
325 325  
326 326  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -340,18 +340,27 @@
340 340  
341 341  == 2.4 Uplink Interval ==
342 342  
343 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
354 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
344 344  
345 345  
346 346  
347 347  == 2.5 ​Show Data in DataCake IoT Server ==
348 348  
360 +(((
349 349  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
362 +)))
350 350  
364 +(((
365 +
366 +)))
351 351  
368 +(((
352 352  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
370 +)))
353 353  
372 +(((
354 354  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
374 +)))
355 355  
356 356  
357 357  [[image:1654592790040-760.png]]
... ... @@ -374,9 +374,13 @@
374 374  [[image:1654592856403-259.png]]
375 375  
376 376  
397 +(((
377 377  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
399 +)))
378 378  
401 +(((
379 379  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
403 +)))
380 380  
381 381  
382 382  [[image:1654592878525-845.png]]
... ... @@ -399,8 +399,10 @@
399 399  === 2.6.1 Before measurement ===
400 400  
401 401  (((
426 +(((
402 402  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
403 403  )))
429 +)))
404 404  
405 405  
406 406  
... ... @@ -407,24 +407,45 @@
407 407  === 2.6.2 Measurement ===
408 408  
409 409  
436 +(((
410 410  (% style="color:#4f81bd" %)**Measurement the soil surface:**
438 +)))
411 411  
440 +(((
412 412  [[image:1654592946732-634.png]]
442 +)))
413 413  
444 +(((
414 414  Choose the proper measuring position. Split the surface soil according to the measured deep.
446 +)))
415 415  
448 +(((
416 416  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
450 +)))
417 417  
452 +(((
418 418  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
454 +)))
419 419  
456 +(((
420 420  Put soil over the probe after insert. And start to measure.
458 +)))
421 421  
460 +(((
461 +
462 +)))
422 422  
464 +(((
423 423  (% style="color:#4f81bd" %)**Measurement inside soil:**
466 +)))
424 424  
468 +(((
425 425  Dig a hole with diameter > 20CM.
470 +)))
426 426  
472 +(((
427 427  Insert the probe inside, method like measure the surface.
474 +)))
428 428  
429 429  
430 430  
... ... @@ -454,9 +454,13 @@
454 454  
455 455  == 2.7 Calibration ==
456 456  
504 +(((
457 457  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
506 +)))
458 458  
508 +(((
459 459  After stable, user can use below command to calibrate.
510 +)))
460 460  
461 461  [[image:image-20220607171149-4.png]]
462 462  
... ... @@ -463,12 +463,10 @@
463 463  
464 464  (% style="color:#037691" %)**Calibration Payload**
465 465  
466 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
467 -|(((
468 -**Size**
469 -
470 -**(bytes)**
471 -)))|**1**|**1**|**1**|**7**|**1**
517 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
518 +|=(% style="width: 62.5px;" %)(((
519 +**Size (bytes)**
520 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
472 472  |**Value**|(((
473 473  PH4
474 474  
... ... @@ -478,7 +478,7 @@
478 478  
479 479  Calibrate value
480 480  )))|Reserve|(((
481 -[[Message Type>>path:#H2.3.6MessageType]]
530 +[[Message Type>>||anchor="H2.3.6MessageType"]]
482 482  
483 483  Always 0x03
484 484  )))
... ... @@ -493,7 +493,6 @@
493 493  
494 494  
495 495  
496 -
497 497  == 2.8 Frequency Plans ==
498 498  
499 499  (((
... ... @@ -503,32 +503,61 @@
503 503  
504 504  === 2.8.1 EU863-870 (EU868) ===
505 505  
554 +(((
506 506  (% style="color:blue" %)**Uplink:**
556 +)))
507 507  
558 +(((
508 508  868.1 - SF7BW125 to SF12BW125
560 +)))
509 509  
562 +(((
510 510  868.3 - SF7BW125 to SF12BW125 and SF7BW250
564 +)))
511 511  
566 +(((
512 512  868.5 - SF7BW125 to SF12BW125
568 +)))
513 513  
570 +(((
514 514  867.1 - SF7BW125 to SF12BW125
572 +)))
515 515  
574 +(((
516 516  867.3 - SF7BW125 to SF12BW125
576 +)))
517 517  
578 +(((
518 518  867.5 - SF7BW125 to SF12BW125
580 +)))
519 519  
582 +(((
520 520  867.7 - SF7BW125 to SF12BW125
584 +)))
521 521  
586 +(((
522 522  867.9 - SF7BW125 to SF12BW125
588 +)))
523 523  
590 +(((
524 524  868.8 - FSK
592 +)))
525 525  
594 +(((
595 +
596 +)))
526 526  
598 +(((
527 527  (% style="color:blue" %)**Downlink:**
600 +)))
528 528  
602 +(((
529 529  Uplink channels 1-9 (RX1)
604 +)))
530 530  
606 +(((
531 531  869.525 - SF9BW125 (RX2 downlink only)
608 +)))
532 532  
533 533  
534 534  
... ... @@ -550,48 +550,92 @@
550 550  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
551 551  
552 552  
630 +
553 553  === 2.8.3 CN470-510 (CN470) ===
554 554  
633 +(((
555 555  Used in China, Default use CHE=1
635 +)))
556 556  
637 +(((
557 557  (% style="color:blue" %)**Uplink:**
639 +)))
558 558  
641 +(((
559 559  486.3 - SF7BW125 to SF12BW125
643 +)))
560 560  
645 +(((
561 561  486.5 - SF7BW125 to SF12BW125
647 +)))
562 562  
649 +(((
563 563  486.7 - SF7BW125 to SF12BW125
651 +)))
564 564  
653 +(((
565 565  486.9 - SF7BW125 to SF12BW125
655 +)))
566 566  
657 +(((
567 567  487.1 - SF7BW125 to SF12BW125
659 +)))
568 568  
661 +(((
569 569  487.3 - SF7BW125 to SF12BW125
663 +)))
570 570  
665 +(((
571 571  487.5 - SF7BW125 to SF12BW125
667 +)))
572 572  
669 +(((
573 573  487.7 - SF7BW125 to SF12BW125
671 +)))
574 574  
673 +(((
674 +
675 +)))
575 575  
677 +(((
576 576  (% style="color:blue" %)**Downlink:**
679 +)))
577 577  
681 +(((
578 578  506.7 - SF7BW125 to SF12BW125
683 +)))
579 579  
685 +(((
580 580  506.9 - SF7BW125 to SF12BW125
687 +)))
581 581  
689 +(((
582 582  507.1 - SF7BW125 to SF12BW125
691 +)))
583 583  
693 +(((
584 584  507.3 - SF7BW125 to SF12BW125
695 +)))
585 585  
697 +(((
586 586  507.5 - SF7BW125 to SF12BW125
699 +)))
587 587  
701 +(((
588 588  507.7 - SF7BW125 to SF12BW125
703 +)))
589 589  
705 +(((
590 590  507.9 - SF7BW125 to SF12BW125
707 +)))
591 591  
709 +(((
592 592  508.1 - SF7BW125 to SF12BW125
711 +)))
593 593  
713 +(((
594 594  505.3 - SF12BW125 (RX2 downlink only)
715 +)))
595 595  
596 596  
597 597  
... ... @@ -619,108 +619,217 @@
619 619  
620 620  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
621 621  
743 +(((
622 622  (% style="color:blue" %)**Default Uplink channel:**
745 +)))
623 623  
747 +(((
624 624  923.2 - SF7BW125 to SF10BW125
749 +)))
625 625  
751 +(((
626 626  923.4 - SF7BW125 to SF10BW125
753 +)))
627 627  
755 +(((
756 +
757 +)))
628 628  
759 +(((
629 629  (% style="color:blue" %)**Additional Uplink Channel**:
761 +)))
630 630  
763 +(((
631 631  (OTAA mode, channel added by JoinAccept message)
765 +)))
632 632  
767 +(((
768 +
769 +)))
633 633  
771 +(((
634 634  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
773 +)))
635 635  
775 +(((
636 636  922.2 - SF7BW125 to SF10BW125
777 +)))
637 637  
779 +(((
638 638  922.4 - SF7BW125 to SF10BW125
781 +)))
639 639  
783 +(((
640 640  922.6 - SF7BW125 to SF10BW125
785 +)))
641 641  
787 +(((
642 642  922.8 - SF7BW125 to SF10BW125
789 +)))
643 643  
791 +(((
644 644  923.0 - SF7BW125 to SF10BW125
793 +)))
645 645  
795 +(((
646 646  922.0 - SF7BW125 to SF10BW125
797 +)))
647 647  
799 +(((
800 +
801 +)))
648 648  
803 +(((
649 649  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
805 +)))
650 650  
807 +(((
651 651  923.6 - SF7BW125 to SF10BW125
809 +)))
652 652  
811 +(((
653 653  923.8 - SF7BW125 to SF10BW125
813 +)))
654 654  
815 +(((
655 655  924.0 - SF7BW125 to SF10BW125
817 +)))
656 656  
819 +(((
657 657  924.2 - SF7BW125 to SF10BW125
821 +)))
658 658  
823 +(((
659 659  924.4 - SF7BW125 to SF10BW125
825 +)))
660 660  
827 +(((
661 661  924.6 - SF7BW125 to SF10BW125
829 +)))
662 662  
831 +(((
832 +
833 +)))
663 663  
835 +(((
664 664  (% style="color:blue" %)**Downlink:**
837 +)))
665 665  
839 +(((
666 666  Uplink channels 1-8 (RX1)
841 +)))
667 667  
843 +(((
668 668  923.2 - SF10BW125 (RX2)
845 +)))
669 669  
670 670  
671 671  
672 672  === 2.8.6 KR920-923 (KR920) ===
673 673  
851 +(((
674 674  (% style="color:blue" %)**Default channel:**
853 +)))
675 675  
855 +(((
676 676  922.1 - SF7BW125 to SF12BW125
857 +)))
677 677  
859 +(((
678 678  922.3 - SF7BW125 to SF12BW125
861 +)))
679 679  
863 +(((
680 680  922.5 - SF7BW125 to SF12BW125
865 +)))
681 681  
867 +(((
868 +
869 +)))
682 682  
871 +(((
683 683  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
873 +)))
684 684  
875 +(((
685 685  922.1 - SF7BW125 to SF12BW125
877 +)))
686 686  
879 +(((
687 687  922.3 - SF7BW125 to SF12BW125
881 +)))
688 688  
883 +(((
689 689  922.5 - SF7BW125 to SF12BW125
885 +)))
690 690  
887 +(((
691 691  922.7 - SF7BW125 to SF12BW125
889 +)))
692 692  
891 +(((
693 693  922.9 - SF7BW125 to SF12BW125
893 +)))
694 694  
895 +(((
695 695  923.1 - SF7BW125 to SF12BW125
897 +)))
696 696  
899 +(((
697 697  923.3 - SF7BW125 to SF12BW125
901 +)))
698 698  
903 +(((
904 +
905 +)))
699 699  
907 +(((
700 700  (% style="color:blue" %)**Downlink:**
909 +)))
701 701  
911 +(((
702 702  Uplink channels 1-7(RX1)
913 +)))
703 703  
915 +(((
704 704  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
917 +)))
705 705  
706 706  
707 707  
708 708  === 2.8.7 IN865-867 (IN865) ===
709 709  
923 +(((
710 710  (% style="color:blue" %)**Uplink:**
925 +)))
711 711  
927 +(((
712 712  865.0625 - SF7BW125 to SF12BW125
929 +)))
713 713  
931 +(((
714 714  865.4025 - SF7BW125 to SF12BW125
933 +)))
715 715  
935 +(((
716 716  865.9850 - SF7BW125 to SF12BW125
937 +)))
717 717  
939 +(((
940 +
941 +)))
718 718  
943 +(((
719 719  (% style="color:blue" %)**Downlink:**
945 +)))
720 720  
947 +(((
721 721  Uplink channels 1-3 (RX1)
949 +)))
722 722  
951 +(((
723 723  866.550 - SF10BW125 (RX2)
953 +)))
724 724  
725 725  
726 726  
... ... @@ -746,26 +746,51 @@
746 746  
747 747  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
748 748  
979 +(((
749 749  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
981 +)))
750 750  
751 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
752 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
983 +* (((
984 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
985 +)))
986 +* (((
987 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
988 +)))
753 753  
990 +(((
754 754  There are two kinds of commands to configure LSPH01, they are:
992 +)))
755 755  
756 -* (% style="color:#4f81bd" %)** General Commands**.
994 +* (((
995 +(% style="color:#4f81bd" %)** General Commands**.
996 +)))
757 757  
998 +(((
758 758  These commands are to configure:
1000 +)))
759 759  
760 -* General system settings like: uplink interval.
761 -* LoRaWAN protocol & radio related command.
1002 +* (((
1003 +General system settings like: uplink interval.
1004 +)))
1005 +* (((
1006 +LoRaWAN protocol & radio related command.
1007 +)))
762 762  
1009 +(((
763 763  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
1011 +)))
764 764  
1013 +(((
1014 +
1015 +)))
765 765  
766 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
1017 +* (((
1018 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
1019 +)))
767 767  
1021 +(((
768 768  These commands only valid for LSPH01, as below:
1023 +)))
769 769  
770 770  
771 771  
... ... @@ -779,18 +779,28 @@
779 779  
780 780  
781 781  
1037 +(((
782 782  (% style="color:#037691" %)**Downlink Command: 0x01**
1039 +)))
783 783  
1041 +(((
784 784  Format: Command Code (0x01) followed by 3 bytes time value.
1043 +)))
785 785  
1045 +(((
786 786  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1047 +)))
787 787  
788 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
789 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1049 +* (((
1050 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1051 +)))
1052 +* (((
1053 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
790 790  
791 791  
1056 +
1057 +)))
792 792  
793 -
794 794  == 3.2 Set Interrupt Mode ==
795 795  
796 796  Feature, Set Interrupt mode for GPIO_EXIT.
... ... @@ -800,19 +800,34 @@
800 800  [[image:image-20220607171716-9.png]]
801 801  
802 802  
1068 +(((
803 803  (% style="color:#037691" %)**Downlink Command: 0x06**
1070 +)))
804 804  
1072 +(((
805 805  Format: Command Code (0x06) followed by 3 bytes.
1074 +)))
806 806  
1076 +(((
807 807  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1078 +)))
808 808  
809 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
810 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1080 +* (((
1081 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1082 +)))
1083 +* (((
1084 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1085 +)))
811 811  
1087 +(((
1088 +
1089 +)))
812 812  
1091 +
1092 +
813 813  == 3.3 Calibrate Sensor ==
814 814  
815 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1095 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
816 816  
817 817  
818 818  
... ... @@ -827,7 +827,6 @@
827 827  * Reply to the confirmation package: 26 01
828 828  * Reply to non-confirmed packet: 26 00
829 829  
830 -
831 831  Device will send an uplink after got this downlink command. With below payload:
832 832  
833 833  Configures info payload:
... ... @@ -845,7 +845,7 @@
845 845  
846 846  Version
847 847  )))|Sensor Type|Reserve|(((
848 -[[Message Type>>path:#H2.3.6MessageType]]
1127 +[[Message Type>>||anchor="H2.3.6MessageType"]]
849 849  Always 0x02
850 850  )))
851 851  
... ... @@ -985,9 +985,13 @@
985 985  
986 986  === ​4.3.2 Replace the battery ===
987 987  
1267 +(((
988 988  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1269 +)))
989 989  
1271 +(((
990 990  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1273 +)))
991 991  
992 992  
993 993  
... ... @@ -1008,24 +1008,24 @@
1008 1008  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1009 1009  
1010 1010  
1294 +(((
1011 1011  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1296 +)))
1012 1012  
1013 1013  
1014 1014   [[image:1654593712276-618.png]]
1015 1015  
1016 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1301 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1017 1017  
1018 1018  
1019 -
1020 1020  = 6. FAQ =
1021 1021  
1022 1022  == 6.1 How to change the LoRa Frequency Bands/Region ==
1023 1023  
1024 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1308 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1025 1025  When downloading the images, choose the required image file for download. ​
1026 1026  
1027 1027  
1028 -
1029 1029  = 7. Trouble Shooting =
1030 1030  
1031 1031  == 7.1 AT Commands input doesn’t work ==
... ... @@ -1050,7 +1050,6 @@
1050 1050  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1051 1051  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1052 1052  
1053 -
1054 1054  = 9. ​Packing Info =
1055 1055  
1056 1056  
... ... @@ -1065,7 +1065,6 @@
1065 1065  * Package Size / pcs : cm
1066 1066  * Weight / pcs : g
1067 1067  
1068 -
1069 1069  = 10. ​Support =
1070 1070  
1071 1071  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1654826112831-311.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +257.0 KB
Content
image-20220610095606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +183.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0