Last modified by Xiaoling on 2025/04/24 17:18
<
From version < 73.6 >
edited by Xiaoling
on 2022/06/07 17:29
To version < 88.4 >
edited by Xiaoling
on 2022/06/10 10:10
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LSPH01-LoRaWAN Soil pH Sensor User Manual
1 +LLDS12-LoRaWAN LiDAR ToF Distance Sensor User Manual
Content
... ... @@ -1,65 +1,9 @@
1 1  (% style="text-align:center" %)
2 -[[image:1654592399090-860.png||height="521" width="483"]]
2 +[[image:image-20220610095606-1.png]]
3 3  
4 4  
5 -
6 -
7 7  **Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 65  
... ... @@ -66,45 +66,49 @@
66 66  
67 67  
68 68  
13 += 1. Introduction =
69 69  
15 +== 1.1 ​What is LoRaWAN LiDAR ToF Distance Sensor ==
70 70  
71 -= 1. Introduction =
17 +(((
18 +
72 72  
73 -== 1.1 ​What is LoRaWAN Soil pH Sensor ==
20 +The Dragino LLDS12 is a (% style="color:blue" %)**LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor**(%%) for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
74 74  
75 -The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
22 +The LLDS12 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
76 76  
77 -LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
24 +It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
78 78  
79 -The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
26 +The LoRa wireless technology used in LLDS12 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
80 80  
81 -LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
28 +LLDS12 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
82 82  
83 -Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
30 +Each LLDS12 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
31 +)))
84 84  
85 85  
86 -[[image:1654592435432-887.png]]
34 +[[image:1654826306458-414.png]]
87 87  
88 88  
89 89  
38 +
90 90  == ​1.2 Features ==
91 91  
92 92  * LoRaWAN 1.0.3 Class A
93 93  * Ultra-low power consumption
94 -* Monitor soil pH with temperature compensation.
95 -* Monitor soil temperature
43 +* Laser technology for distance detection
44 +* Operating Range - 0.1m~~12m①
45 +* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
96 96  * Monitor Battery Level
97 -* Support pH calibration by end user
98 98  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
99 99  * AT Commands to change parameters
100 100  * Uplink on periodically
101 101  * Downlink to change configure
102 -* IP66 Waterproof Enclosure
103 -* IP68 rate for the Sensor Probe
104 104  * 8500mAh Battery for long term use
105 105  
106 106  
107 107  
55 +
108 108  == 1.3 Probe Specification ==
109 109  
110 110  
... ... @@ -127,12 +127,11 @@
127 127  
128 128  
129 129  
78 +
130 130  == 1.4 ​Applications ==
131 131  
132 132  * Smart Agriculture
133 133  
134 -
135 -
136 136  == 1.5 Pin mapping and power on ==
137 137  
138 138  [[image:1654592472094-134.png]]
... ... @@ -148,7 +148,7 @@
148 148  )))
149 149  
150 150  (((
151 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
98 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
152 152  )))
153 153  
154 154  
... ... @@ -211,7 +211,9 @@
211 211  [[image:image-20220607170442-2.png]]
212 212  
213 213  
161 +(((
214 214  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
163 +)))
215 215  
216 216  [[image:1654592697690-910.png]]
217 217  
... ... @@ -219,26 +219,30 @@
219 219  
220 220  == 2.3 ​Uplink Payload ==
221 221  
171 +(((
222 222  LSPH01 will uplink payload via LoRaWAN with below payload format: 
173 +)))
223 223  
175 +(((
224 224  Uplink payload includes in total 11 bytes.
177 +)))
225 225  
179 +(((
226 226  Normal uplink payload:
181 +)))
227 227  
228 228  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
229 -|(((
230 -**Size**
184 +|=(% style="width: 62.5px;" %)(((
185 +**Size (bytes)**
186 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
187 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
188 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
231 231  
232 -**(bytes)**
233 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
234 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
235 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
236 -
237 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
238 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
239 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
190 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
191 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
192 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
240 240  )))|Reserve|(((
241 -[[Message Type>>path:#H2.3.6MessageType]]
194 +[[Message Type>>||anchor="H2.3.6MessageType"]]
242 242  )))
243 243  
244 244  [[image:1654592721645-318.png]]
... ... @@ -294,7 +294,7 @@
294 294  
295 295  === 2.3.5 Interrupt Pin ===
296 296  
297 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
250 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
298 298  
299 299  
300 300  **Example:**
... ... @@ -307,20 +307,21 @@
307 307  
308 308  === 2.3.6 Message Type ===
309 309  
263 +(((
310 310  For a normal uplink payload, the message type is always 0x01.
265 +)))
311 311  
267 +(((
312 312  Valid Message Type:
269 +)))
313 313  
314 314  
315 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
316 -|**Message Type Code**|**Description**|**Payload**
317 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
318 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
319 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
272 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
273 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
274 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
275 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
276 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
320 320  
321 -
322 -
323 -
324 324  === 2.3.7 Decode payload in The Things Network ===
325 325  
326 326  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -340,18 +340,27 @@
340 340  
341 341  == 2.4 Uplink Interval ==
342 342  
343 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
297 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
344 344  
345 345  
346 346  
347 347  == 2.5 ​Show Data in DataCake IoT Server ==
348 348  
303 +(((
349 349  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
305 +)))
350 350  
307 +(((
308 +
309 +)))
351 351  
311 +(((
352 352  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
313 +)))
353 353  
315 +(((
354 354  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
317 +)))
355 355  
356 356  
357 357  [[image:1654592790040-760.png]]
... ... @@ -374,9 +374,13 @@
374 374  [[image:1654592856403-259.png]]
375 375  
376 376  
340 +(((
377 377  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
342 +)))
378 378  
344 +(((
379 379  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
346 +)))
380 380  
381 381  
382 382  [[image:1654592878525-845.png]]
... ... @@ -399,8 +399,10 @@
399 399  === 2.6.1 Before measurement ===
400 400  
401 401  (((
369 +(((
402 402  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
403 403  )))
372 +)))
404 404  
405 405  
406 406  
... ... @@ -407,24 +407,45 @@
407 407  === 2.6.2 Measurement ===
408 408  
409 409  
379 +(((
410 410  (% style="color:#4f81bd" %)**Measurement the soil surface:**
381 +)))
411 411  
383 +(((
412 412  [[image:1654592946732-634.png]]
385 +)))
413 413  
387 +(((
414 414  Choose the proper measuring position. Split the surface soil according to the measured deep.
389 +)))
415 415  
391 +(((
416 416  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
393 +)))
417 417  
395 +(((
418 418  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
397 +)))
419 419  
399 +(((
420 420  Put soil over the probe after insert. And start to measure.
401 +)))
421 421  
403 +(((
404 +
405 +)))
422 422  
407 +(((
423 423  (% style="color:#4f81bd" %)**Measurement inside soil:**
409 +)))
424 424  
411 +(((
425 425  Dig a hole with diameter > 20CM.
413 +)))
426 426  
415 +(((
427 427  Insert the probe inside, method like measure the surface.
417 +)))
428 428  
429 429  
430 430  
... ... @@ -454,9 +454,13 @@
454 454  
455 455  == 2.7 Calibration ==
456 456  
447 +(((
457 457  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
449 +)))
458 458  
451 +(((
459 459  After stable, user can use below command to calibrate.
453 +)))
460 460  
461 461  [[image:image-20220607171149-4.png]]
462 462  
... ... @@ -463,12 +463,10 @@
463 463  
464 464  (% style="color:#037691" %)**Calibration Payload**
465 465  
466 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
467 -|(((
468 -**Size**
469 -
470 -**(bytes)**
471 -)))|**1**|**1**|**1**|**7**|**1**
460 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
461 +|=(% style="width: 62.5px;" %)(((
462 +**Size (bytes)**
463 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
472 472  |**Value**|(((
473 473  PH4
474 474  
... ... @@ -478,7 +478,7 @@
478 478  
479 479  Calibrate value
480 480  )))|Reserve|(((
481 -[[Message Type>>path:#H2.3.6MessageType]]
473 +[[Message Type>>||anchor="H2.3.6MessageType"]]
482 482  
483 483  Always 0x03
484 484  )))
... ... @@ -492,8 +492,6 @@
492 492  * Reply to non-confirmed packet: 14 00
493 493  
494 494  
495 -
496 -
497 497  == 2.8 Frequency Plans ==
498 498  
499 499  (((
... ... @@ -503,32 +503,61 @@
503 503  
504 504  === 2.8.1 EU863-870 (EU868) ===
505 505  
496 +(((
506 506  (% style="color:blue" %)**Uplink:**
498 +)))
507 507  
500 +(((
508 508  868.1 - SF7BW125 to SF12BW125
502 +)))
509 509  
504 +(((
510 510  868.3 - SF7BW125 to SF12BW125 and SF7BW250
506 +)))
511 511  
508 +(((
512 512  868.5 - SF7BW125 to SF12BW125
510 +)))
513 513  
512 +(((
514 514  867.1 - SF7BW125 to SF12BW125
514 +)))
515 515  
516 +(((
516 516  867.3 - SF7BW125 to SF12BW125
518 +)))
517 517  
520 +(((
518 518  867.5 - SF7BW125 to SF12BW125
522 +)))
519 519  
524 +(((
520 520  867.7 - SF7BW125 to SF12BW125
526 +)))
521 521  
528 +(((
522 522  867.9 - SF7BW125 to SF12BW125
530 +)))
523 523  
532 +(((
524 524  868.8 - FSK
534 +)))
525 525  
536 +(((
537 +
538 +)))
526 526  
540 +(((
527 527  (% style="color:blue" %)**Downlink:**
542 +)))
528 528  
544 +(((
529 529  Uplink channels 1-9 (RX1)
546 +)))
530 530  
548 +(((
531 531  869.525 - SF9BW125 (RX2 downlink only)
550 +)))
532 532  
533 533  
534 534  
... ... @@ -552,46 +552,89 @@
552 552  
553 553  === 2.8.3 CN470-510 (CN470) ===
554 554  
574 +(((
555 555  Used in China, Default use CHE=1
576 +)))
556 556  
578 +(((
557 557  (% style="color:blue" %)**Uplink:**
580 +)))
558 558  
582 +(((
559 559  486.3 - SF7BW125 to SF12BW125
584 +)))
560 560  
586 +(((
561 561  486.5 - SF7BW125 to SF12BW125
588 +)))
562 562  
590 +(((
563 563  486.7 - SF7BW125 to SF12BW125
592 +)))
564 564  
594 +(((
565 565  486.9 - SF7BW125 to SF12BW125
596 +)))
566 566  
598 +(((
567 567  487.1 - SF7BW125 to SF12BW125
600 +)))
568 568  
602 +(((
569 569  487.3 - SF7BW125 to SF12BW125
604 +)))
570 570  
606 +(((
571 571  487.5 - SF7BW125 to SF12BW125
608 +)))
572 572  
610 +(((
573 573  487.7 - SF7BW125 to SF12BW125
612 +)))
574 574  
614 +(((
615 +
616 +)))
575 575  
618 +(((
576 576  (% style="color:blue" %)**Downlink:**
620 +)))
577 577  
622 +(((
578 578  506.7 - SF7BW125 to SF12BW125
624 +)))
579 579  
626 +(((
580 580  506.9 - SF7BW125 to SF12BW125
628 +)))
581 581  
630 +(((
582 582  507.1 - SF7BW125 to SF12BW125
632 +)))
583 583  
634 +(((
584 584  507.3 - SF7BW125 to SF12BW125
636 +)))
585 585  
638 +(((
586 586  507.5 - SF7BW125 to SF12BW125
640 +)))
587 587  
642 +(((
588 588  507.7 - SF7BW125 to SF12BW125
644 +)))
589 589  
646 +(((
590 590  507.9 - SF7BW125 to SF12BW125
648 +)))
591 591  
650 +(((
592 592  508.1 - SF7BW125 to SF12BW125
652 +)))
593 593  
654 +(((
594 594  505.3 - SF12BW125 (RX2 downlink only)
656 +)))
595 595  
596 596  
597 597  
... ... @@ -616,111 +616,219 @@
616 616  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
617 617  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
618 618  
619 -
620 620  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
621 621  
683 +(((
622 622  (% style="color:blue" %)**Default Uplink channel:**
685 +)))
623 623  
687 +(((
624 624  923.2 - SF7BW125 to SF10BW125
689 +)))
625 625  
691 +(((
626 626  923.4 - SF7BW125 to SF10BW125
693 +)))
627 627  
695 +(((
696 +
697 +)))
628 628  
699 +(((
629 629  (% style="color:blue" %)**Additional Uplink Channel**:
701 +)))
630 630  
703 +(((
631 631  (OTAA mode, channel added by JoinAccept message)
705 +)))
632 632  
707 +(((
708 +
709 +)))
633 633  
711 +(((
634 634  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
713 +)))
635 635  
715 +(((
636 636  922.2 - SF7BW125 to SF10BW125
717 +)))
637 637  
719 +(((
638 638  922.4 - SF7BW125 to SF10BW125
721 +)))
639 639  
723 +(((
640 640  922.6 - SF7BW125 to SF10BW125
725 +)))
641 641  
727 +(((
642 642  922.8 - SF7BW125 to SF10BW125
729 +)))
643 643  
731 +(((
644 644  923.0 - SF7BW125 to SF10BW125
733 +)))
645 645  
735 +(((
646 646  922.0 - SF7BW125 to SF10BW125
737 +)))
647 647  
739 +(((
740 +
741 +)))
648 648  
743 +(((
649 649  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
745 +)))
650 650  
747 +(((
651 651  923.6 - SF7BW125 to SF10BW125
749 +)))
652 652  
751 +(((
653 653  923.8 - SF7BW125 to SF10BW125
753 +)))
654 654  
755 +(((
655 655  924.0 - SF7BW125 to SF10BW125
757 +)))
656 656  
759 +(((
657 657  924.2 - SF7BW125 to SF10BW125
761 +)))
658 658  
763 +(((
659 659  924.4 - SF7BW125 to SF10BW125
765 +)))
660 660  
767 +(((
661 661  924.6 - SF7BW125 to SF10BW125
769 +)))
662 662  
771 +(((
772 +
773 +)))
663 663  
775 +(((
664 664  (% style="color:blue" %)**Downlink:**
777 +)))
665 665  
779 +(((
666 666  Uplink channels 1-8 (RX1)
781 +)))
667 667  
783 +(((
668 668  923.2 - SF10BW125 (RX2)
785 +)))
669 669  
670 670  
671 671  
672 672  === 2.8.6 KR920-923 (KR920) ===
673 673  
791 +(((
674 674  (% style="color:blue" %)**Default channel:**
793 +)))
675 675  
795 +(((
676 676  922.1 - SF7BW125 to SF12BW125
797 +)))
677 677  
799 +(((
678 678  922.3 - SF7BW125 to SF12BW125
801 +)))
679 679  
803 +(((
680 680  922.5 - SF7BW125 to SF12BW125
805 +)))
681 681  
807 +(((
808 +
809 +)))
682 682  
811 +(((
683 683  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
813 +)))
684 684  
815 +(((
685 685  922.1 - SF7BW125 to SF12BW125
817 +)))
686 686  
819 +(((
687 687  922.3 - SF7BW125 to SF12BW125
821 +)))
688 688  
823 +(((
689 689  922.5 - SF7BW125 to SF12BW125
825 +)))
690 690  
827 +(((
691 691  922.7 - SF7BW125 to SF12BW125
829 +)))
692 692  
831 +(((
693 693  922.9 - SF7BW125 to SF12BW125
833 +)))
694 694  
835 +(((
695 695  923.1 - SF7BW125 to SF12BW125
837 +)))
696 696  
839 +(((
697 697  923.3 - SF7BW125 to SF12BW125
841 +)))
698 698  
843 +(((
844 +
845 +)))
699 699  
847 +(((
700 700  (% style="color:blue" %)**Downlink:**
849 +)))
701 701  
851 +(((
702 702  Uplink channels 1-7(RX1)
853 +)))
703 703  
855 +(((
704 704  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
857 +)))
705 705  
706 706  
707 707  
708 708  === 2.8.7 IN865-867 (IN865) ===
709 709  
863 +(((
710 710  (% style="color:blue" %)**Uplink:**
865 +)))
711 711  
867 +(((
712 712  865.0625 - SF7BW125 to SF12BW125
869 +)))
713 713  
871 +(((
714 714  865.4025 - SF7BW125 to SF12BW125
873 +)))
715 715  
875 +(((
716 716  865.9850 - SF7BW125 to SF12BW125
877 +)))
717 717  
879 +(((
880 +
881 +)))
718 718  
883 +(((
719 719  (% style="color:blue" %)**Downlink:**
885 +)))
720 720  
887 +(((
721 721  Uplink channels 1-3 (RX1)
889 +)))
722 722  
891 +(((
723 723  866.550 - SF10BW125 (RX2)
893 +)))
724 724  
725 725  
726 726  
... ... @@ -731,7 +731,6 @@
731 731  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
732 732  * Blink once when device transmit a packet.
733 733  
734 -
735 735  == 2.10 ​Firmware Change Log ==
736 736  
737 737  
... ... @@ -746,26 +746,51 @@
746 746  
747 747  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
748 748  
918 +(((
749 749  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
920 +)))
750 750  
751 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
752 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
922 +* (((
923 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
924 +)))
925 +* (((
926 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
927 +)))
753 753  
929 +(((
754 754  There are two kinds of commands to configure LSPH01, they are:
931 +)))
755 755  
756 -* (% style="color:#4f81bd" %)** General Commands**.
933 +* (((
934 +(% style="color:#4f81bd" %)** General Commands**.
935 +)))
757 757  
937 +(((
758 758  These commands are to configure:
939 +)))
759 759  
760 -* General system settings like: uplink interval.
761 -* LoRaWAN protocol & radio related command.
941 +* (((
942 +General system settings like: uplink interval.
943 +)))
944 +* (((
945 +LoRaWAN protocol & radio related command.
946 +)))
762 762  
948 +(((
763 763  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
950 +)))
764 764  
952 +(((
953 +
954 +)))
765 765  
766 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
956 +* (((
957 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
958 +)))
767 767  
960 +(((
768 768  These commands only valid for LSPH01, as below:
962 +)))
769 769  
770 770  
771 771  
... ... @@ -779,15 +779,28 @@
779 779  
780 780  
781 781  
976 +(((
782 782  (% style="color:#037691" %)**Downlink Command: 0x01**
978 +)))
783 783  
980 +(((
784 784  Format: Command Code (0x01) followed by 3 bytes time value.
982 +)))
785 785  
984 +(((
786 786  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
986 +)))
787 787  
788 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
789 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
988 +* (((
989 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
990 +)))
991 +* (((
992 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
790 790  
994 +
995 +
996 +)))
997 +
791 791  == 3.2 Set Interrupt Mode ==
792 792  
793 793  Feature, Set Interrupt mode for GPIO_EXIT.
... ... @@ -797,19 +797,34 @@
797 797  [[image:image-20220607171716-9.png]]
798 798  
799 799  
1007 +(((
800 800  (% style="color:#037691" %)**Downlink Command: 0x06**
1009 +)))
801 801  
1011 +(((
802 802  Format: Command Code (0x06) followed by 3 bytes.
1013 +)))
803 803  
1015 +(((
804 804  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1017 +)))
805 805  
806 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
807 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1019 +* (((
1020 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1021 +)))
1022 +* (((
1023 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1024 +)))
808 808  
1026 +(((
1027 +
1028 +)))
809 809  
1030 +
1031 +
810 810  == 3.3 Calibrate Sensor ==
811 811  
812 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1034 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
813 813  
814 814  
815 815  
... ... @@ -841,7 +841,7 @@
841 841  
842 842  Version
843 843  )))|Sensor Type|Reserve|(((
844 -[[Message Type>>path:#H2.3.6MessageType]]
1066 +[[Message Type>>||anchor="H2.3.6MessageType"]]
845 845  Always 0x02
846 846  )))
847 847  
... ... @@ -981,9 +981,13 @@
981 981  
982 982  === ​4.3.2 Replace the battery ===
983 983  
1206 +(((
984 984  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1208 +)))
985 985  
1210 +(((
986 986  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1212 +)))
987 987  
988 988  
989 989  
... ... @@ -1004,24 +1004,24 @@
1004 1004  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1005 1005  
1006 1006  
1233 +(((
1007 1007  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1235 +)))
1008 1008  
1009 1009  
1010 1010   [[image:1654593712276-618.png]]
1011 1011  
1012 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1240 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1013 1013  
1014 1014  
1015 -
1016 1016  = 6. FAQ =
1017 1017  
1018 1018  == 6.1 How to change the LoRa Frequency Bands/Region ==
1019 1019  
1020 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1247 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1021 1021  When downloading the images, choose the required image file for download. ​
1022 1022  
1023 1023  
1024 -
1025 1025  = 7. Trouble Shooting =
1026 1026  
1027 1027  == 7.1 AT Commands input doesn’t work ==
... ... @@ -1046,7 +1046,6 @@
1046 1046  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1047 1047  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1048 1048  
1049 -
1050 1050  = 9. ​Packing Info =
1051 1051  
1052 1052  
... ... @@ -1061,7 +1061,6 @@
1061 1061  * Package Size / pcs : cm
1062 1062  * Weight / pcs : g
1063 1063  
1064 -
1065 1065  = 10. ​Support =
1066 1066  
1067 1067  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1654826112831-311.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +257.0 KB
Content
1654826306458-414.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +109.3 KB
Content
image-20220610095606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +183.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0