Last modified by Xiaoling on 2025/04/24 17:18

From version 73.5
edited by Xiaoling
on 2022/06/07 17:28
Change comment: There is no comment for this version
To version 93.8
edited by Xiaoling
on 2022/06/10 10:32
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LSPH01-LoRaWAN Soil pH Sensor User Manual
1 +LLDS12-LoRaWAN LiDAR ToF Distance Sensor User Manual
Content
... ... @@ -1,65 +1,9 @@
1 1  (% style="text-align:center" %)
2 -[[image:1654592399090-860.png||height="521" width="483"]]
2 +[[image:image-20220610095606-1.png]]
3 3  
4 4  
5 -
6 -
7 7  **Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 65  
... ... @@ -66,89 +66,94 @@
66 66  
67 67  
68 68  
13 += 1.  Introduction =
69 69  
15 +== 1.1 ​ What is LoRaWAN LiDAR ToF Distance Sensor ==
70 70  
71 -= 1. Introduction =
17 +(((
18 +
72 72  
73 -== 1.1 ​What is LoRaWAN Soil pH Sensor ==
20 +The Dragino LLDS12 is a (% style="color:blue" %)**LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor**(%%) for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
74 74  
75 -The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
22 +The LLDS12 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
76 76  
77 -LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
24 +It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
78 78  
79 -The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
26 +The LoRa wireless technology used in LLDS12 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
80 80  
81 -LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
28 +LLDS12 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
82 82  
83 -Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
30 +Each LLDS12 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
31 +)))
84 84  
85 85  
86 -[[image:1654592435432-887.png]]
34 +[[image:1654826306458-414.png]]
87 87  
88 88  
89 89  
90 -== ​1.2 Features ==
38 +== ​1.2  Features ==
91 91  
92 92  * LoRaWAN 1.0.3 Class A
93 93  * Ultra-low power consumption
94 -* Monitor soil pH with temperature compensation.
95 -* Monitor soil temperature
42 +* Laser technology for distance detection
43 +* Operating Range - 0.1m~~12m①
44 +* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
96 96  * Monitor Battery Level
97 -* Support pH calibration by end user
98 98  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
99 99  * AT Commands to change parameters
100 100  * Uplink on periodically
101 101  * Downlink to change configure
102 -* IP66 Waterproof Enclosure
103 -* IP68 rate for the Sensor Probe
104 104  * 8500mAh Battery for long term use
105 105  
52 +== 1.3  Probe Specification ==
106 106  
54 +* Storage temperature :-20℃~~75℃
55 +* Operating temperature - -20℃~~60℃
56 +* Operating Range - 0.1m~~12m①
57 +* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
58 +* Distance resolution - 5mm
59 +* Ambient light immunity - 70klux
60 +* Enclosure rating - IP65
61 +* Light source - LED
62 +* Central wavelength - 850nm
63 +* FOV - 3.6°
64 +* Material of enclosure - ABS+PC
65 +* Wire length - 25cm
107 107  
108 -== 1.3 Probe Specification ==
67 +== 1. Probe Dimension ==
109 109  
110 110  
111 -(% style="color:#4f81bd" %)**Soil pH:**
70 +[[image:1654827224480-952.png]]
112 112  
113 -* Range: 3 ~~ 10 pH
114 -* Resolution: 0.01 pH
115 -* Accuracy: ±2% under (0~~50 ℃, Accuracy will poor under 0 due to frozen)
116 -* Temperature Compensation Range: 0 ~~ 50℃
117 -* IP68 Protection
118 -* Length: 3.5 meters
119 119  
120 -(% style="color:#4f81bd" %)**Soil Temperature:**
121 121  
122 -* Range -40℃~85℃
123 -* Resolution: 0.1℃
124 -* Accuracy: <±0.5℃(-10℃~40℃),<±0.8℃ (others)
125 -* IP68 Protection
126 -* Length: 3.5 meters
74 +== 1.5 ​ Applications ==
127 127  
76 +* Horizontal distance measurement
77 +* Parking management system
78 +* Object proximity and presence detection
79 +* Intelligent trash can management system
80 +* Robot obstacle avoidance
81 +* Automatic control
82 +* Sewer
128 128  
84 +== 1.6 Pin mapping and power on ==
129 129  
130 -== 1.4 ​Applications ==
131 131  
132 -* Smart Agriculture
87 +[[image:1654827332142-133.png]]
133 133  
134 134  
135 135  
136 -== 1.5 Pin mapping and power on ==
91 += 2. Configure LLDS12 to connect to LoRaWAN network =
137 137  
138 -[[image:1654592472094-134.png]]
139 -
140 -
141 -
142 -= 2. Configure LSPH01 to connect to LoRaWAN network =
143 -
144 144  == 2.1 How it works ==
145 145  
146 146  (((
147 -The LSPH01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSPH01. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
96 +The LLDS12 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LLDS12. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
148 148  )))
149 149  
150 150  (((
151 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
100 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H6.UseATCommand"]]to set the keys in the LLDS12.
152 152  )))
153 153  
154 154  
... ... @@ -159,7 +159,7 @@
159 159  )))
160 160  
161 161  (((
162 -[[image:1654592492399-921.png]]
111 +[[image:1654827857527-556.png]]
163 163  )))
164 164  
165 165  (((
... ... @@ -211,7 +211,9 @@
211 211  [[image:image-20220607170442-2.png]]
212 212  
213 213  
163 +(((
214 214  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
165 +)))
215 215  
216 216  [[image:1654592697690-910.png]]
217 217  
... ... @@ -219,26 +219,30 @@
219 219  
220 220  == 2.3 ​Uplink Payload ==
221 221  
173 +(((
222 222  LSPH01 will uplink payload via LoRaWAN with below payload format: 
175 +)))
223 223  
177 +(((
224 224  Uplink payload includes in total 11 bytes.
179 +)))
225 225  
181 +(((
226 226  Normal uplink payload:
183 +)))
227 227  
228 228  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
229 -|(((
230 -**Size**
186 +|=(% style="width: 62.5px;" %)(((
187 +**Size (bytes)**
188 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
189 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
190 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
231 231  
232 -**(bytes)**
233 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
234 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
235 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
236 -
237 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
238 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
239 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
192 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
193 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
194 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
240 240  )))|Reserve|(((
241 -[[Message Type>>path:#H2.3.6MessageType]]
196 +[[Message Type>>||anchor="H2.3.6MessageType"]]
242 242  )))
243 243  
244 244  [[image:1654592721645-318.png]]
... ... @@ -294,7 +294,7 @@
294 294  
295 295  === 2.3.5 Interrupt Pin ===
296 296  
297 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
252 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
298 298  
299 299  
300 300  **Example:**
... ... @@ -307,20 +307,21 @@
307 307  
308 308  === 2.3.6 Message Type ===
309 309  
265 +(((
310 310  For a normal uplink payload, the message type is always 0x01.
267 +)))
311 311  
269 +(((
312 312  Valid Message Type:
271 +)))
313 313  
314 314  
315 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
316 -|**Message Type Code**|**Description**|**Payload**
317 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
318 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
319 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
274 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
275 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
276 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
277 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
278 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
320 320  
321 -
322 -
323 -
324 324  === 2.3.7 Decode payload in The Things Network ===
325 325  
326 326  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -340,18 +340,27 @@
340 340  
341 341  == 2.4 Uplink Interval ==
342 342  
343 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
299 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
344 344  
345 345  
346 346  
347 347  == 2.5 ​Show Data in DataCake IoT Server ==
348 348  
305 +(((
349 349  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
307 +)))
350 350  
309 +(((
310 +
311 +)))
351 351  
313 +(((
352 352  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
315 +)))
353 353  
317 +(((
354 354  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
319 +)))
355 355  
356 356  
357 357  [[image:1654592790040-760.png]]
... ... @@ -374,9 +374,13 @@
374 374  [[image:1654592856403-259.png]]
375 375  
376 376  
342 +(((
377 377  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
344 +)))
378 378  
346 +(((
379 379  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
348 +)))
380 380  
381 381  
382 382  [[image:1654592878525-845.png]]
... ... @@ -399,8 +399,10 @@
399 399  === 2.6.1 Before measurement ===
400 400  
401 401  (((
371 +(((
402 402  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
403 403  )))
374 +)))
404 404  
405 405  
406 406  
... ... @@ -407,24 +407,45 @@
407 407  === 2.6.2 Measurement ===
408 408  
409 409  
381 +(((
410 410  (% style="color:#4f81bd" %)**Measurement the soil surface:**
383 +)))
411 411  
385 +(((
412 412  [[image:1654592946732-634.png]]
387 +)))
413 413  
389 +(((
414 414  Choose the proper measuring position. Split the surface soil according to the measured deep.
391 +)))
415 415  
393 +(((
416 416  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
395 +)))
417 417  
397 +(((
418 418  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
399 +)))
419 419  
401 +(((
420 420  Put soil over the probe after insert. And start to measure.
403 +)))
421 421  
405 +(((
406 +
407 +)))
422 422  
409 +(((
423 423  (% style="color:#4f81bd" %)**Measurement inside soil:**
411 +)))
424 424  
413 +(((
425 425  Dig a hole with diameter > 20CM.
415 +)))
426 426  
417 +(((
427 427  Insert the probe inside, method like measure the surface.
419 +)))
428 428  
429 429  
430 430  
... ... @@ -454,9 +454,13 @@
454 454  
455 455  == 2.7 Calibration ==
456 456  
449 +(((
457 457  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
451 +)))
458 458  
453 +(((
459 459  After stable, user can use below command to calibrate.
455 +)))
460 460  
461 461  [[image:image-20220607171149-4.png]]
462 462  
... ... @@ -463,12 +463,10 @@
463 463  
464 464  (% style="color:#037691" %)**Calibration Payload**
465 465  
466 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
467 -|(((
468 -**Size**
469 -
470 -**(bytes)**
471 -)))|**1**|**1**|**1**|**7**|**1**
462 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
463 +|=(% style="width: 62.5px;" %)(((
464 +**Size (bytes)**
465 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
472 472  |**Value**|(((
473 473  PH4
474 474  
... ... @@ -478,7 +478,7 @@
478 478  
479 479  Calibrate value
480 480  )))|Reserve|(((
481 -[[Message Type>>path:#H2.3.6MessageType]]
475 +[[Message Type>>||anchor="H2.3.6MessageType"]]
482 482  
483 483  Always 0x03
484 484  )))
... ... @@ -500,32 +500,61 @@
500 500  
501 501  === 2.8.1 EU863-870 (EU868) ===
502 502  
497 +(((
503 503  (% style="color:blue" %)**Uplink:**
499 +)))
504 504  
501 +(((
505 505  868.1 - SF7BW125 to SF12BW125
503 +)))
506 506  
505 +(((
507 507  868.3 - SF7BW125 to SF12BW125 and SF7BW250
507 +)))
508 508  
509 +(((
509 509  868.5 - SF7BW125 to SF12BW125
511 +)))
510 510  
513 +(((
511 511  867.1 - SF7BW125 to SF12BW125
515 +)))
512 512  
517 +(((
513 513  867.3 - SF7BW125 to SF12BW125
519 +)))
514 514  
521 +(((
515 515  867.5 - SF7BW125 to SF12BW125
523 +)))
516 516  
525 +(((
517 517  867.7 - SF7BW125 to SF12BW125
527 +)))
518 518  
529 +(((
519 519  867.9 - SF7BW125 to SF12BW125
531 +)))
520 520  
533 +(((
521 521  868.8 - FSK
535 +)))
522 522  
537 +(((
538 +
539 +)))
523 523  
541 +(((
524 524  (% style="color:blue" %)**Downlink:**
543 +)))
525 525  
545 +(((
526 526  Uplink channels 1-9 (RX1)
547 +)))
527 527  
549 +(((
528 528  869.525 - SF9BW125 (RX2 downlink only)
551 +)))
529 529  
530 530  
531 531  
... ... @@ -546,49 +546,91 @@
546 546  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
547 547  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
548 548  
549 -
550 550  === 2.8.3 CN470-510 (CN470) ===
551 551  
574 +(((
552 552  Used in China, Default use CHE=1
576 +)))
553 553  
578 +(((
554 554  (% style="color:blue" %)**Uplink:**
580 +)))
555 555  
582 +(((
556 556  486.3 - SF7BW125 to SF12BW125
584 +)))
557 557  
586 +(((
558 558  486.5 - SF7BW125 to SF12BW125
588 +)))
559 559  
590 +(((
560 560  486.7 - SF7BW125 to SF12BW125
592 +)))
561 561  
594 +(((
562 562  486.9 - SF7BW125 to SF12BW125
596 +)))
563 563  
598 +(((
564 564  487.1 - SF7BW125 to SF12BW125
600 +)))
565 565  
602 +(((
566 566  487.3 - SF7BW125 to SF12BW125
604 +)))
567 567  
606 +(((
568 568  487.5 - SF7BW125 to SF12BW125
608 +)))
569 569  
610 +(((
570 570  487.7 - SF7BW125 to SF12BW125
612 +)))
571 571  
614 +(((
615 +
616 +)))
572 572  
618 +(((
573 573  (% style="color:blue" %)**Downlink:**
620 +)))
574 574  
622 +(((
575 575  506.7 - SF7BW125 to SF12BW125
624 +)))
576 576  
626 +(((
577 577  506.9 - SF7BW125 to SF12BW125
628 +)))
578 578  
630 +(((
579 579  507.1 - SF7BW125 to SF12BW125
632 +)))
580 580  
634 +(((
581 581  507.3 - SF7BW125 to SF12BW125
636 +)))
582 582  
638 +(((
583 583  507.5 - SF7BW125 to SF12BW125
640 +)))
584 584  
642 +(((
585 585  507.7 - SF7BW125 to SF12BW125
644 +)))
586 586  
646 +(((
587 587  507.9 - SF7BW125 to SF12BW125
648 +)))
588 588  
650 +(((
589 589  508.1 - SF7BW125 to SF12BW125
652 +)))
590 590  
654 +(((
591 591  505.3 - SF12BW125 (RX2 downlink only)
656 +)))
592 592  
593 593  
594 594  
... ... @@ -613,111 +613,219 @@
613 613  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
614 614  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
615 615  
616 -
617 617  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
618 618  
683 +(((
619 619  (% style="color:blue" %)**Default Uplink channel:**
685 +)))
620 620  
687 +(((
621 621  923.2 - SF7BW125 to SF10BW125
689 +)))
622 622  
691 +(((
623 623  923.4 - SF7BW125 to SF10BW125
693 +)))
624 624  
695 +(((
696 +
697 +)))
625 625  
699 +(((
626 626  (% style="color:blue" %)**Additional Uplink Channel**:
701 +)))
627 627  
703 +(((
628 628  (OTAA mode, channel added by JoinAccept message)
705 +)))
629 629  
707 +(((
708 +
709 +)))
630 630  
711 +(((
631 631  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
713 +)))
632 632  
715 +(((
633 633  922.2 - SF7BW125 to SF10BW125
717 +)))
634 634  
719 +(((
635 635  922.4 - SF7BW125 to SF10BW125
721 +)))
636 636  
723 +(((
637 637  922.6 - SF7BW125 to SF10BW125
725 +)))
638 638  
727 +(((
639 639  922.8 - SF7BW125 to SF10BW125
729 +)))
640 640  
731 +(((
641 641  923.0 - SF7BW125 to SF10BW125
733 +)))
642 642  
735 +(((
643 643  922.0 - SF7BW125 to SF10BW125
737 +)))
644 644  
739 +(((
740 +
741 +)))
645 645  
743 +(((
646 646  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
745 +)))
647 647  
747 +(((
648 648  923.6 - SF7BW125 to SF10BW125
749 +)))
649 649  
751 +(((
650 650  923.8 - SF7BW125 to SF10BW125
753 +)))
651 651  
755 +(((
652 652  924.0 - SF7BW125 to SF10BW125
757 +)))
653 653  
759 +(((
654 654  924.2 - SF7BW125 to SF10BW125
761 +)))
655 655  
763 +(((
656 656  924.4 - SF7BW125 to SF10BW125
765 +)))
657 657  
767 +(((
658 658  924.6 - SF7BW125 to SF10BW125
769 +)))
659 659  
771 +(((
772 +
773 +)))
660 660  
775 +(((
661 661  (% style="color:blue" %)**Downlink:**
777 +)))
662 662  
779 +(((
663 663  Uplink channels 1-8 (RX1)
781 +)))
664 664  
783 +(((
665 665  923.2 - SF10BW125 (RX2)
785 +)))
666 666  
667 667  
668 668  
669 669  === 2.8.6 KR920-923 (KR920) ===
670 670  
791 +(((
671 671  (% style="color:blue" %)**Default channel:**
793 +)))
672 672  
795 +(((
673 673  922.1 - SF7BW125 to SF12BW125
797 +)))
674 674  
799 +(((
675 675  922.3 - SF7BW125 to SF12BW125
801 +)))
676 676  
803 +(((
677 677  922.5 - SF7BW125 to SF12BW125
805 +)))
678 678  
807 +(((
808 +
809 +)))
679 679  
811 +(((
680 680  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
813 +)))
681 681  
815 +(((
682 682  922.1 - SF7BW125 to SF12BW125
817 +)))
683 683  
819 +(((
684 684  922.3 - SF7BW125 to SF12BW125
821 +)))
685 685  
823 +(((
686 686  922.5 - SF7BW125 to SF12BW125
825 +)))
687 687  
827 +(((
688 688  922.7 - SF7BW125 to SF12BW125
829 +)))
689 689  
831 +(((
690 690  922.9 - SF7BW125 to SF12BW125
833 +)))
691 691  
835 +(((
692 692  923.1 - SF7BW125 to SF12BW125
837 +)))
693 693  
839 +(((
694 694  923.3 - SF7BW125 to SF12BW125
841 +)))
695 695  
843 +(((
844 +
845 +)))
696 696  
847 +(((
697 697  (% style="color:blue" %)**Downlink:**
849 +)))
698 698  
851 +(((
699 699  Uplink channels 1-7(RX1)
853 +)))
700 700  
855 +(((
701 701  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
857 +)))
702 702  
703 703  
704 704  
705 705  === 2.8.7 IN865-867 (IN865) ===
706 706  
863 +(((
707 707  (% style="color:blue" %)**Uplink:**
865 +)))
708 708  
867 +(((
709 709  865.0625 - SF7BW125 to SF12BW125
869 +)))
710 710  
871 +(((
711 711  865.4025 - SF7BW125 to SF12BW125
873 +)))
712 712  
875 +(((
713 713  865.9850 - SF7BW125 to SF12BW125
877 +)))
714 714  
879 +(((
880 +
881 +)))
715 715  
883 +(((
716 716  (% style="color:blue" %)**Downlink:**
885 +)))
717 717  
887 +(((
718 718  Uplink channels 1-3 (RX1)
889 +)))
719 719  
891 +(((
720 720  866.550 - SF10BW125 (RX2)
893 +)))
721 721  
722 722  
723 723  
... ... @@ -728,7 +728,6 @@
728 728  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
729 729  * Blink once when device transmit a packet.
730 730  
731 -
732 732  == 2.10 ​Firmware Change Log ==
733 733  
734 734  
... ... @@ -743,26 +743,51 @@
743 743  
744 744  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
745 745  
918 +(((
746 746  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
920 +)))
747 747  
748 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
749 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
922 +* (((
923 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
924 +)))
925 +* (((
926 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
927 +)))
750 750  
929 +(((
751 751  There are two kinds of commands to configure LSPH01, they are:
931 +)))
752 752  
753 -* (% style="color:#4f81bd" %)** General Commands**.
933 +* (((
934 +(% style="color:#4f81bd" %)** General Commands**.
935 +)))
754 754  
937 +(((
755 755  These commands are to configure:
939 +)))
756 756  
757 -* General system settings like: uplink interval.
758 -* LoRaWAN protocol & radio related command.
941 +* (((
942 +General system settings like: uplink interval.
943 +)))
944 +* (((
945 +LoRaWAN protocol & radio related command.
946 +)))
759 759  
948 +(((
760 760  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
950 +)))
761 761  
952 +(((
953 +
954 +)))
762 762  
763 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
956 +* (((
957 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
958 +)))
764 764  
960 +(((
765 765  These commands only valid for LSPH01, as below:
962 +)))
766 766  
767 767  
768 768  
... ... @@ -776,15 +776,28 @@
776 776  
777 777  
778 778  
976 +(((
779 779  (% style="color:#037691" %)**Downlink Command: 0x01**
978 +)))
780 780  
980 +(((
781 781  Format: Command Code (0x01) followed by 3 bytes time value.
982 +)))
782 782  
984 +(((
783 783  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
986 +)))
784 784  
785 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
786 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
988 +* (((
989 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
990 +)))
991 +* (((
992 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
787 787  
994 +
995 +
996 +)))
997 +
788 788  == 3.2 Set Interrupt Mode ==
789 789  
790 790  Feature, Set Interrupt mode for GPIO_EXIT.
... ... @@ -794,19 +794,34 @@
794 794  [[image:image-20220607171716-9.png]]
795 795  
796 796  
1007 +(((
797 797  (% style="color:#037691" %)**Downlink Command: 0x06**
1009 +)))
798 798  
1011 +(((
799 799  Format: Command Code (0x06) followed by 3 bytes.
1013 +)))
800 800  
1015 +(((
801 801  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1017 +)))
802 802  
803 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
804 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1019 +* (((
1020 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1021 +)))
1022 +* (((
1023 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1024 +)))
805 805  
1026 +(((
1027 +
1028 +)))
806 806  
1030 +
1031 +
807 807  == 3.3 Calibrate Sensor ==
808 808  
809 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1034 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
810 810  
811 811  
812 812  
... ... @@ -838,7 +838,7 @@
838 838  
839 839  Version
840 840  )))|Sensor Type|Reserve|(((
841 -[[Message Type>>path:#H2.3.6MessageType]]
1066 +[[Message Type>>||anchor="H2.3.6MessageType"]]
842 842  Always 0x02
843 843  )))
844 844  
... ... @@ -978,9 +978,13 @@
978 978  
979 979  === ​4.3.2 Replace the battery ===
980 980  
1206 +(((
981 981  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1208 +)))
982 982  
1210 +(((
983 983  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1212 +)))
984 984  
985 985  
986 986  
... ... @@ -1001,37 +1001,48 @@
1001 1001  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1002 1002  
1003 1003  
1233 +(((
1004 1004  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1235 +)))
1005 1005  
1006 1006  
1007 1007   [[image:1654593712276-618.png]]
1008 1008  
1009 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1240 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1010 1010  
1011 1011  
1243 += 6.  FAQ =
1012 1012  
1013 -= 6. FAQ =
1245 +== 6. How to change the LoRa Frequency Bands/Region ==
1014 1014  
1015 -== 6.1 How to change the LoRa Frequency Bands/Region ==
1016 -
1017 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1247 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1018 1018  When downloading the images, choose the required image file for download. ​
1019 1019  
1020 1020  
1251 += 8.  Trouble Shooting =
1021 1021  
1022 -= 7. Trouble Shooting =
1253 +== 8. AT Commands input doesn’t work ==
1023 1023  
1024 -== 7.1 AT Commands input doesn’t work ==
1025 -
1026 1026  In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1027 1027  
1028 1028  
1258 +== 8.2  Significant error between the output distant value of LiDAR and actual distance ==
1029 1029  
1030 -= 8. Order Info =
1260 +Cause ①:Due to the physical principles of The LiDAR probe, the above phenomenon is likely to occur if the detection object is the material with high reflectivity (such as mirror, smooth floor tile, etc.) or transparent substance (such as glass and water, etc.)
1031 1031  
1032 -Part Number: (% style="color:blue" %)**LSPH01-XX**
1262 +Troubleshooting: Please avoid use of this product under such circumstance in practice.
1033 1033  
1034 1034  
1265 +Cause ②: The IR-pass filters are blocked.
1266 +
1267 +Troubleshooting: please use dry dust-free cloth to gently remove the foreign matter
1268 +
1269 +
1270 += 9.  Order Info =
1271 +
1272 +Part Number: (% style="color:blue" %)**LLDS12-XX**
1273 +
1274 +
1035 1035  (% style="color:blue" %)**XX**(%%): The default frequency band
1036 1036  
1037 1037  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -1044,12 +1044,13 @@
1044 1044  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1045 1045  
1046 1046  
1047 -= 9. ​Packing Info =
1048 1048  
1288 += 10. ​ Packing Info =
1049 1049  
1290 +
1050 1050  **Package Includes**:
1051 1051  
1052 -* LSPH01 LoRaWAN Soil Ph Sensor x 1
1293 +* LLDS12 LoRaWAN LiDAR Distance Sensor x 1
1053 1053  
1054 1054  **Dimension and weight**:
1055 1055  
... ... @@ -1059,8 +1059,9 @@
1059 1059  * Weight / pcs : g
1060 1060  
1061 1061  
1062 -= 10. ​Support =
1063 1063  
1304 += 11.  ​Support =
1305 +
1064 1064  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1065 1065  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]].
1066 1066  
1654826112831-311.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +257.0 KB
Content
1654826306458-414.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +109.3 KB
Content
1654827224480-952.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.2 KB
Content
1654827332142-133.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +492.6 KB
Content
1654827857527-556.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +109.3 KB
Content
image-20220610095606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +183.2 KB
Content