Skip to Content
Last modified by Xiaoling on 2025/04/24 17:18
From version 73.4
edited by Xiaoling
on 2022/06/07 17:24
Change comment: There is no comment for this version
To version 89.2
edited by Xiaoling
on 2022/06/10 10:12
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LSPH01-LoRaWAN Soil pH Sensor User Manual
1 +LLDS12-LoRaWAN LiDAR ToF Distance Sensor User Manual
Content
... ... @@ -1,65 +1,9 @@
1 1  (% style="text-align:center" %)
2 -[[image:1654592399090-860.png||height="521" width="483"]]
2 +[[image:image-20220610095606-1.png]]
3 3  
4 4  
5 -
6 -
7 7  **Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 65  
... ... @@ -66,25 +66,29 @@
66 66  
67 67  
68 68  
13 += 1. Introduction =
69 69  
15 +== 1.1 ​What is LoRaWAN LiDAR ToF Distance Sensor ==
70 70  
17 +(((
18 +
71 71  
72 -= 1. Introduction =
20 +The Dragino LLDS12 is a (% style="color:blue" %)**LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor**(%%) for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
73 73  
74 -== 1.1 ​What is LoRaWAN Soil pH Sensor ==
22 +The LLDS12 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
75 75  
76 -The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
24 +It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
77 77  
78 -LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
26 +The LoRa wireless technology used in LLDS12 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
79 79  
80 -The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
28 +LLDS12 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
81 81  
82 -LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
30 +Each LLDS12 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
31 +)))
83 83  
84 -Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
85 85  
34 +[[image:1654826306458-414.png]]
86 86  
87 -[[image:1654592435432-887.png]]
88 88  
89 89  
90 90  
... ... @@ -92,44 +92,34 @@
92 92  
93 93  * LoRaWAN 1.0.3 Class A
94 94  * Ultra-low power consumption
95 -* Monitor soil pH with temperature compensation.
96 -* Monitor soil temperature
43 +* Laser technology for distance detection
44 +* Operating Range - 0.1m~~12m①
45 +* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
97 97  * Monitor Battery Level
98 -* Support pH calibration by end user
99 99  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
100 100  * AT Commands to change parameters
101 101  * Uplink on periodically
102 102  * Downlink to change configure
103 -* IP66 Waterproof Enclosure
104 -* IP68 rate for the Sensor Probe
105 105  * 8500mAh Battery for long term use
106 106  
107 107  
108 -
109 -
110 110  == 1.3 Probe Specification ==
111 111  
112 112  
113 -(% style="color:#4f81bd" %)**Soil pH:**
57 +* Storage temperature ：-20℃~~75℃
58 +* Operating temperature - -20℃~~60℃
59 +* Operating Range - 0.1m~~12m①
60 +* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
61 +* Distance resolution - 5mm
62 +* Ambient light immunity - 70klux
63 +* Enclosure rating - IP65
64 +* Light source - LED
65 +* Central wavelength - 850nm
66 +* FOV - 3.6°
67 +* Material of enclosure - ABS+PC
68 +* Wire length - 25cm
114 114  
115 -* Range: 3 ~~ 10 pH
116 -* Resolution: 0.01 pH
117 -* Accuracy: ±2% under (0~~50 ℃, Accuracy will poor under 0 due to frozen)
118 -* Temperature Compensation Range: 0 ~~ 50℃
119 -* IP68 Protection
120 -* Length: 3.5 meters
121 121  
122 -(% style="color:#4f81bd" %)**Soil Temperature:**
123 -
124 -* Range -40℃～85℃
125 -* Resolution: 0.1℃
126 -* Accuracy: <±0.5℃(-10℃～40℃)，<±0.8℃ (others)
127 -* IP68 Protection
128 -* Length: 3.5 meters
129 -
130 -
131 -
132 -
133 133  == 1.4 ​Applications ==
134 134  
135 135  * Smart Agriculture
... ... @@ -136,7 +136,6 @@
136 136  
137 137  
138 138  
139 -
140 140  == 1.5 Pin mapping and power on ==
141 141  
142 142  [[image:1654592472094-134.png]]
... ... @@ -152,7 +152,7 @@
152 152  )))
153 153  
154 154  (((
155 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
92 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
156 156  )))
157 157  
158 158  
... ... @@ -215,7 +215,9 @@
215 215  [[image:image-20220607170442-2.png]]
216 216  
217 217  
155 +(((
218 218  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
157 +)))
219 219  
220 220  [[image:1654592697690-910.png]]
221 221  
... ... @@ -223,26 +223,30 @@
223 223  
224 224  == 2.3 ​Uplink Payload ==
225 225  
165 +(((
226 226  LSPH01 will uplink payload via LoRaWAN with below payload format: 
167 +)))
227 227  
169 +(((
228 228  Uplink payload includes in total 11 bytes.
171 +)))
229 229  
173 +(((
230 230  Normal uplink payload:
175 +)))
231 231  
232 232  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
233 -|(((
234 -**Size**
178 +|=(% style="width: 62.5px;" %)(((
179 +**Size (bytes)**
180 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
181 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
182 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
235 235  
236 -**(bytes)**
237 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
238 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
239 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
240 -
241 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
242 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
243 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
184 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
185 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
186 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
244 244  )))|Reserve|(((
245 -[[Message Type>>path:#H2.3.6MessageType]]
188 +[[Message Type>>||anchor="H2.3.6MessageType"]]
246 246  )))
247 247  
248 248  [[image:1654592721645-318.png]]
... ... @@ -298,7 +298,7 @@
298 298  
299 299  === 2.3.5 Interrupt Pin ===
300 300  
301 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
244 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
302 302  
303 303  
304 304  **Example:**
... ... @@ -311,18 +311,21 @@
311 311  
312 312  === 2.3.6 Message Type ===
313 313  
257 +(((
314 314  For a normal uplink payload, the message type is always 0x01.
259 +)))
315 315  
261 +(((
316 316  Valid Message Type:
263 +)))
317 317  
318 318  
319 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
320 -|**Message Type Code**|**Description**|**Payload**
321 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
322 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
323 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
266 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
267 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
268 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
269 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
270 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
324 324  
325 -
326 326  === 2.3.7 Decode payload in The Things Network ===
327 327  
328 328  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -342,18 +342,27 @@
342 342  
343 343  == 2.4 Uplink Interval ==
344 344  
345 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
291 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
346 346  
347 347  
348 348  
349 349  == 2.5 ​Show Data in DataCake IoT Server ==
350 350  
297 +(((
351 351  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
299 +)))
352 352  
301 +(((
302 +
303 +)))
353 353  
305 +(((
354 354  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
307 +)))
355 355  
309 +(((
356 356  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
311 +)))
357 357  
358 358  
359 359  [[image:1654592790040-760.png]]
... ... @@ -376,9 +376,13 @@
376 376  [[image:1654592856403-259.png]]
377 377  
378 378  
334 +(((
379 379  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
336 +)))
380 380  
338 +(((
381 381  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
340 +)))
382 382  
383 383  
384 384  [[image:1654592878525-845.png]]
... ... @@ -401,8 +401,10 @@
401 401  === 2.6.1 Before measurement ===
402 402  
403 403  (((
363 +(((
404 404  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
405 405  )))
366 +)))
406 406  
407 407  
408 408  
... ... @@ -409,24 +409,45 @@
409 409  === 2.6.2 Measurement ===
410 410  
411 411  
373 +(((
412 412  (% style="color:#4f81bd" %)**Measurement the soil surface:**
375 +)))
413 413  
377 +(((
414 414  [[image:1654592946732-634.png]]
379 +)))
415 415  
381 +(((
416 416  Choose the proper measuring position. Split the surface soil according to the measured deep.
383 +)))
417 417  
385 +(((
418 418  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
387 +)))
419 419  
389 +(((
420 420  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
391 +)))
421 421  
393 +(((
422 422  Put soil over the probe after insert. And start to measure.
395 +)))
423 423  
397 +(((
398 +
399 +)))
424 424  
401 +(((
425 425  (% style="color:#4f81bd" %)**Measurement inside soil:**
403 +)))
426 426  
405 +(((
427 427  Dig a hole with diameter > 20CM.
407 +)))
428 428  
409 +(((
429 429  Insert the probe inside, method like measure the surface.
411 +)))
430 430  
431 431  
432 432  
... ... @@ -456,9 +456,13 @@
456 456  
457 457  == 2.7 Calibration ==
458 458  
441 +(((
459 459  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
443 +)))
460 460  
445 +(((
461 461  After stable, user can use below command to calibrate.
447 +)))
462 462  
463 463  [[image:image-20220607171149-4.png]]
464 464  
... ... @@ -465,12 +465,10 @@
465 465  
466 466  (% style="color:#037691" %)**Calibration Payload**
467 467  
468 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
469 -|(((
470 -**Size**
471 -
472 -**(bytes)**
473 -)))|**1**|**1**|**1**|**7**|**1**
454 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
455 +|=(% style="width: 62.5px;" %)(((
456 +**Size (bytes)**
457 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
474 474  |**Value**|(((
475 475  PH4
476 476  
... ... @@ -480,7 +480,7 @@
480 480  
481 481  Calibrate value
482 482  )))|Reserve|(((
483 -[[Message Type>>path:#H2.3.6MessageType]]
467 +[[Message Type>>||anchor="H2.3.6MessageType"]]
484 484  
485 485  Always 0x03
486 486  )))
... ... @@ -493,7 +493,6 @@
493 493  * Reply to the confirmation package: 14 01
494 494  * Reply to non-confirmed packet: 14 00
495 495  
496 -
497 497  == 2.8 Frequency Plans ==
498 498  
499 499  (((
... ... @@ -503,32 +503,61 @@
503 503  
504 504  === 2.8.1 EU863-870 (EU868) ===
505 505  
489 +(((
506 506  (% style="color:blue" %)**Uplink:**
491 +)))
507 507  
493 +(((
508 508  868.1 - SF7BW125 to SF12BW125
495 +)))
509 509  
497 +(((
510 510  868.3 - SF7BW125 to SF12BW125 and SF7BW250
499 +)))
511 511  
501 +(((
512 512  868.5 - SF7BW125 to SF12BW125
503 +)))
513 513  
505 +(((
514 514  867.1 - SF7BW125 to SF12BW125
507 +)))
515 515  
509 +(((
516 516  867.3 - SF7BW125 to SF12BW125
511 +)))
517 517  
513 +(((
518 518  867.5 - SF7BW125 to SF12BW125
515 +)))
519 519  
517 +(((
520 520  867.7 - SF7BW125 to SF12BW125
519 +)))
521 521  
521 +(((
522 522  867.9 - SF7BW125 to SF12BW125
523 +)))
523 523  
525 +(((
524 524  868.8 - FSK
527 +)))
525 525  
529 +(((
530 +
531 +)))
526 526  
533 +(((
527 527  (% style="color:blue" %)**Downlink:**
535 +)))
528 528  
537 +(((
529 529  Uplink channels 1-9 (RX1)
539 +)))
530 530  
541 +(((
531 531  869.525 - SF9BW125 (RX2 downlink only)
543 +)))
532 532  
533 533  
534 534  
... ... @@ -549,50 +549,91 @@
549 549  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
550 550  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
551 551  
552 -
553 -
554 554  === 2.8.3 CN470-510 (CN470) ===
555 555  
566 +(((
556 556  Used in China, Default use CHE=1
568 +)))
557 557  
570 +(((
558 558  (% style="color:blue" %)**Uplink:**
572 +)))
559 559  
574 +(((
560 560  486.3 - SF7BW125 to SF12BW125
576 +)))
561 561  
578 +(((
562 562  486.5 - SF7BW125 to SF12BW125
580 +)))
563 563  
582 +(((
564 564  486.7 - SF7BW125 to SF12BW125
584 +)))
565 565  
586 +(((
566 566  486.9 - SF7BW125 to SF12BW125
588 +)))
567 567  
590 +(((
568 568  487.1 - SF7BW125 to SF12BW125
592 +)))
569 569  
594 +(((
570 570  487.3 - SF7BW125 to SF12BW125
596 +)))
571 571  
598 +(((
572 572  487.5 - SF7BW125 to SF12BW125
600 +)))
573 573  
602 +(((
574 574  487.7 - SF7BW125 to SF12BW125
604 +)))
575 575  
606 +(((
607 +
608 +)))
576 576  
610 +(((
577 577  (% style="color:blue" %)**Downlink:**
612 +)))
578 578  
614 +(((
579 579  506.7 - SF7BW125 to SF12BW125
616 +)))
580 580  
618 +(((
581 581  506.9 - SF7BW125 to SF12BW125
620 +)))
582 582  
622 +(((
583 583  507.1 - SF7BW125 to SF12BW125
624 +)))
584 584  
626 +(((
585 585  507.3 - SF7BW125 to SF12BW125
628 +)))
586 586  
630 +(((
587 587  507.5 - SF7BW125 to SF12BW125
632 +)))
588 588  
634 +(((
589 589  507.7 - SF7BW125 to SF12BW125
636 +)))
590 590  
638 +(((
591 591  507.9 - SF7BW125 to SF12BW125
640 +)))
592 592  
642 +(((
593 593  508.1 - SF7BW125 to SF12BW125
644 +)))
594 594  
646 +(((
595 595  505.3 - SF12BW125 (RX2 downlink only)
648 +)))
596 596  
597 597  
598 598  
... ... @@ -617,112 +617,219 @@
617 617  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
618 618  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
619 619  
620 -
621 -
622 622  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
623 623  
675 +(((
624 624  (% style="color:blue" %)**Default Uplink channel:**
677 +)))
625 625  
679 +(((
626 626  923.2 - SF7BW125 to SF10BW125
681 +)))
627 627  
683 +(((
628 628  923.4 - SF7BW125 to SF10BW125
685 +)))
629 629  
687 +(((
688 +
689 +)))
630 630  
691 +(((
631 631  (% style="color:blue" %)**Additional Uplink Channel**:
693 +)))
632 632  
695 +(((
633 633  (OTAA mode, channel added by JoinAccept message)
697 +)))
634 634  
699 +(((
700 +
701 +)))
635 635  
703 +(((
636 636  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
705 +)))
637 637  
707 +(((
638 638  922.2 - SF7BW125 to SF10BW125
709 +)))
639 639  
711 +(((
640 640  922.4 - SF7BW125 to SF10BW125
713 +)))
641 641  
715 +(((
642 642  922.6 - SF7BW125 to SF10BW125
717 +)))
643 643  
719 +(((
644 644  922.8 - SF7BW125 to SF10BW125
721 +)))
645 645  
723 +(((
646 646  923.0 - SF7BW125 to SF10BW125
725 +)))
647 647  
727 +(((
648 648  922.0 - SF7BW125 to SF10BW125
729 +)))
649 649  
731 +(((
732 +
733 +)))
650 650  
735 +(((
651 651  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
737 +)))
652 652  
739 +(((
653 653  923.6 - SF7BW125 to SF10BW125
741 +)))
654 654  
743 +(((
655 655  923.8 - SF7BW125 to SF10BW125
745 +)))
656 656  
747 +(((
657 657  924.0 - SF7BW125 to SF10BW125
749 +)))
658 658  
751 +(((
659 659  924.2 - SF7BW125 to SF10BW125
753 +)))
660 660  
755 +(((
661 661  924.4 - SF7BW125 to SF10BW125
757 +)))
662 662  
759 +(((
663 663  924.6 - SF7BW125 to SF10BW125
761 +)))
664 664  
763 +(((
764 +
765 +)))
665 665  
767 +(((
666 666  (% style="color:blue" %)**Downlink:**
769 +)))
667 667  
771 +(((
668 668  Uplink channels 1-8 (RX1)
773 +)))
669 669  
775 +(((
670 670  923.2 - SF10BW125 (RX2)
777 +)))
671 671  
672 672  
673 673  
674 674  === 2.8.6 KR920-923 (KR920) ===
675 675  
783 +(((
676 676  (% style="color:blue" %)**Default channel:**
785 +)))
677 677  
787 +(((
678 678  922.1 - SF7BW125 to SF12BW125
789 +)))
679 679  
791 +(((
680 680  922.3 - SF7BW125 to SF12BW125
793 +)))
681 681  
795 +(((
682 682  922.5 - SF7BW125 to SF12BW125
797 +)))
683 683  
799 +(((
800 +
801 +)))
684 684  
803 +(((
685 685  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
805 +)))
686 686  
807 +(((
687 687  922.1 - SF7BW125 to SF12BW125
809 +)))
688 688  
811 +(((
689 689  922.3 - SF7BW125 to SF12BW125
813 +)))
690 690  
815 +(((
691 691  922.5 - SF7BW125 to SF12BW125
817 +)))
692 692  
819 +(((
693 693  922.7 - SF7BW125 to SF12BW125
821 +)))
694 694  
823 +(((
695 695  922.9 - SF7BW125 to SF12BW125
825 +)))
696 696  
827 +(((
697 697  923.1 - SF7BW125 to SF12BW125
829 +)))
698 698  
831 +(((
699 699  923.3 - SF7BW125 to SF12BW125
833 +)))
700 700  
835 +(((
836 +
837 +)))
701 701  
839 +(((
702 702  (% style="color:blue" %)**Downlink:**
841 +)))
703 703  
843 +(((
704 704  Uplink channels 1-7(RX1)
845 +)))
705 705  
847 +(((
706 706  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
849 +)))
707 707  
708 708  
709 709  
710 710  === 2.8.7 IN865-867 (IN865) ===
711 711  
855 +(((
712 712  (% style="color:blue" %)**Uplink:**
857 +)))
713 713  
859 +(((
714 714  865.0625 - SF7BW125 to SF12BW125
861 +)))
715 715  
863 +(((
716 716  865.4025 - SF7BW125 to SF12BW125
865 +)))
717 717  
867 +(((
718 718  865.9850 - SF7BW125 to SF12BW125
869 +)))
719 719  
871 +(((
872 +
873 +)))
720 720  
875 +(((
721 721  (% style="color:blue" %)**Downlink:**
877 +)))
722 722  
879 +(((
723 723  Uplink channels 1-3 (RX1)
881 +)))
724 724  
883 +(((
725 725  866.550 - SF10BW125 (RX2)
885 +)))
726 726  
727 727  
728 728  
... ... @@ -733,8 +733,6 @@
733 733  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
734 734  * Blink once when device transmit a packet.
735 735  
736 -
737 -
738 738  == 2.10 ​Firmware Change Log ==
739 739  
740 740  
... ... @@ -749,26 +749,51 @@
749 749  
750 750  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
751 751  
910 +(((
752 752  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
912 +)))
753 753  
754 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
755 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
914 +* (((
915 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
916 +)))
917 +* (((
918 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
919 +)))
756 756  
921 +(((
757 757  There are two kinds of commands to configure LSPH01, they are:
923 +)))
758 758  
759 -* (% style="color:#4f81bd" %)** General Commands**.
925 +* (((
926 +(% style="color:#4f81bd" %)** General Commands**.
927 +)))
760 760  
929 +(((
761 761  These commands are to configure:
931 +)))
762 762  
763 -* General system settings like: uplink interval.
764 -* LoRaWAN protocol & radio related command.
933 +* (((
934 +General system settings like: uplink interval.
935 +)))
936 +* (((
937 +LoRaWAN protocol & radio related command.
938 +)))
765 765  
940 +(((
766 766  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
942 +)))
767 767  
944 +(((
945 +
946 +)))
768 768  
769 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
948 +* (((
949 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
950 +)))
770 770  
952 +(((
771 771  These commands only valid for LSPH01, as below:
954 +)))
772 772  
773 773  
774 774  
... ... @@ -782,16 +782,28 @@
782 782  
783 783  
784 784  
968 +(((
785 785  (% style="color:#037691" %)**Downlink Command: 0x01**
970 +)))
786 786  
972 +(((
787 787  Format: Command Code (0x01) followed by 3 bytes time value.
974 +)))
788 788  
976 +(((
789 789  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
978 +)))
790 790  
791 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
792 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
980 +* (((
981 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
982 +)))
983 +* (((
984 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
793 793  
794 794  
987 +
988 +)))
989 +
795 795  == 3.2 Set Interrupt Mode ==
796 796  
797 797  Feature, Set Interrupt mode for GPIO_EXIT.
... ... @@ -801,20 +801,34 @@
801 801  [[image:image-20220607171716-9.png]]
802 802  
803 803  
999 +(((
804 804  (% style="color:#037691" %)**Downlink Command: 0x06**
1001 +)))
805 805  
1003 +(((
806 806  Format: Command Code (0x06) followed by 3 bytes.
1005 +)))
807 807  
1007 +(((
808 808  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1009 +)))
809 809  
810 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
811 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1011 +* (((
1012 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1013 +)))
1014 +* (((
1015 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1016 +)))
812 812  
1018 +(((
1019 +
1020 +)))
813 813  
814 814  
1023 +
815 815  == 3.3 Calibrate Sensor ==
816 816  
817 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1026 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
818 818  
819 819  
820 820  
... ... @@ -846,7 +846,7 @@
846 846  
847 847  Version
848 848  )))|Sensor Type|Reserve|(((
849 -[[Message Type>>path:#H2.3.6MessageType]]
1058 +[[Message Type>>||anchor="H2.3.6MessageType"]]
850 850  Always 0x02
851 851  )))
852 852  
... ... @@ -986,9 +986,13 @@
986 986  
987 987  === ​4.3.2 Replace the battery ===
988 988  
1198 +(((
989 989  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1200 +)))
990 990  
1202 +(((
991 991  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1204 +)))
992 992  
993 993  
994 994  
... ... @@ -1009,24 +1009,24 @@
1009 1009  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1010 1010  
1011 1011  
1225 +(((
1012 1012  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1227 +)))
1013 1013  
1014 1014  
1015 1015   [[image:1654593712276-618.png]]
1016 1016  
1017 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1232 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1018 1018  
1019 1019  
1020 -
1021 1021  = 6. FAQ =
1022 1022  
1023 1023  == 6.1 How to change the LoRa Frequency Bands/Region ==
1024 1024  
1025 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1239 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1026 1026  When downloading the images, choose the required image file for download. ​
1027 1027  
1028 1028  
1029 -
1030 1030  = 7. Trouble Shooting =
1031 1031  
1032 1032  == 7.1 AT Commands input doesn’t work ==
... ... @@ -1051,8 +1051,6 @@
1051 1051  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1052 1052  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1053 1053  
1054 -
1055 -
1056 1056  = 9. ​Packing Info =
1057 1057  
1058 1058  
... ... @@ -1067,8 +1067,6 @@
1067 1067  * Package Size / pcs : cm
1068 1068  * Weight / pcs : g
1069 1069  
1070 -
1071 -
1072 1072  = 10. ​Support =
1073 1073  
1074 1074  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1654826112831-311.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +257.0 KB
Content
1654826306458-414.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +109.3 KB
Content
image-20220610095606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +183.2 KB
Content