Last modified by Xiaoling on 2025/04/24 17:18
<
From version < 73.3 >
edited by Xiaoling
on 2022/06/07 17:24
To version < 88.4 >
edited by Xiaoling
on 2022/06/10 10:10
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LSPH01-LoRaWAN Soil pH Sensor User Manual
1 +LLDS12-LoRaWAN LiDAR ToF Distance Sensor User Manual
Content
... ... @@ -1,65 +1,9 @@
1 1  (% style="text-align:center" %)
2 -[[image:1654592399090-860.png||height="521" width="483"]]
2 +[[image:image-20220610095606-1.png]]
3 3  
4 4  
5 -
6 -
7 7  **Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 65  
... ... @@ -66,25 +66,29 @@
66 66  
67 67  
68 68  
13 += 1. Introduction =
69 69  
15 +== 1.1 ​What is LoRaWAN LiDAR ToF Distance Sensor ==
70 70  
17 +(((
18 +
71 71  
72 -= 1. Introduction =
20 +The Dragino LLDS12 is a (% style="color:blue" %)**LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor**(%%) for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
73 73  
74 -== 1.1 ​What is LoRaWAN Soil pH Sensor ==
22 +The LLDS12 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
75 75  
76 -The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
24 +It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
77 77  
78 -LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
26 +The LoRa wireless technology used in LLDS12 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
79 79  
80 -The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
28 +LLDS12 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
81 81  
82 -LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
30 +Each LLDS12 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
31 +)))
83 83  
84 -Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
85 85  
34 +[[image:1654826306458-414.png]]
86 86  
87 -[[image:1654592435432-887.png]]
88 88  
89 89  
90 90  
... ... @@ -92,16 +92,14 @@
92 92  
93 93  * LoRaWAN 1.0.3 Class A
94 94  * Ultra-low power consumption
95 -* Monitor soil pH with temperature compensation.
96 -* Monitor soil temperature
43 +* Laser technology for distance detection
44 +* Operating Range - 0.1m~~12m①
45 +* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
97 97  * Monitor Battery Level
98 -* Support pH calibration by end user
99 99  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
100 100  * AT Commands to change parameters
101 101  * Uplink on periodically
102 102  * Downlink to change configure
103 -* IP66 Waterproof Enclosure
104 -* IP68 rate for the Sensor Probe
105 105  * 8500mAh Battery for long term use
106 106  
107 107  
... ... @@ -149,7 +149,7 @@
149 149  )))
150 150  
151 151  (((
152 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
98 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
153 153  )))
154 154  
155 155  
... ... @@ -212,7 +212,9 @@
212 212  [[image:image-20220607170442-2.png]]
213 213  
214 214  
161 +(((
215 215  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
163 +)))
216 216  
217 217  [[image:1654592697690-910.png]]
218 218  
... ... @@ -220,26 +220,30 @@
220 220  
221 221  == 2.3 ​Uplink Payload ==
222 222  
171 +(((
223 223  LSPH01 will uplink payload via LoRaWAN with below payload format: 
173 +)))
224 224  
175 +(((
225 225  Uplink payload includes in total 11 bytes.
177 +)))
226 226  
179 +(((
227 227  Normal uplink payload:
181 +)))
228 228  
229 229  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
230 -|(((
231 -**Size**
184 +|=(% style="width: 62.5px;" %)(((
185 +**Size (bytes)**
186 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
187 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
188 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
232 232  
233 -**(bytes)**
234 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
235 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
236 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
237 -
238 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
239 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
240 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
190 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
191 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
192 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
241 241  )))|Reserve|(((
242 -[[Message Type>>path:#H2.3.6MessageType]]
194 +[[Message Type>>||anchor="H2.3.6MessageType"]]
243 243  )))
244 244  
245 245  [[image:1654592721645-318.png]]
... ... @@ -295,7 +295,7 @@
295 295  
296 296  === 2.3.5 Interrupt Pin ===
297 297  
298 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
250 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
299 299  
300 300  
301 301  **Example:**
... ... @@ -308,18 +308,21 @@
308 308  
309 309  === 2.3.6 Message Type ===
310 310  
263 +(((
311 311  For a normal uplink payload, the message type is always 0x01.
265 +)))
312 312  
267 +(((
313 313  Valid Message Type:
269 +)))
314 314  
315 315  
316 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
317 -|**Message Type Code**|**Description**|**Payload**
318 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
319 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
320 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
272 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
273 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
274 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
275 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
276 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
321 321  
322 -
323 323  === 2.3.7 Decode payload in The Things Network ===
324 324  
325 325  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -339,18 +339,27 @@
339 339  
340 340  == 2.4 Uplink Interval ==
341 341  
342 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
297 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
343 343  
344 344  
345 345  
346 346  == 2.5 ​Show Data in DataCake IoT Server ==
347 347  
303 +(((
348 348  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
305 +)))
349 349  
307 +(((
308 +
309 +)))
350 350  
311 +(((
351 351  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
313 +)))
352 352  
315 +(((
353 353  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
317 +)))
354 354  
355 355  
356 356  [[image:1654592790040-760.png]]
... ... @@ -373,9 +373,13 @@
373 373  [[image:1654592856403-259.png]]
374 374  
375 375  
340 +(((
376 376  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
342 +)))
377 377  
344 +(((
378 378  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
346 +)))
379 379  
380 380  
381 381  [[image:1654592878525-845.png]]
... ... @@ -398,8 +398,10 @@
398 398  === 2.6.1 Before measurement ===
399 399  
400 400  (((
369 +(((
401 401  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
402 402  )))
372 +)))
403 403  
404 404  
405 405  
... ... @@ -406,24 +406,45 @@
406 406  === 2.6.2 Measurement ===
407 407  
408 408  
379 +(((
409 409  (% style="color:#4f81bd" %)**Measurement the soil surface:**
381 +)))
410 410  
383 +(((
411 411  [[image:1654592946732-634.png]]
385 +)))
412 412  
387 +(((
413 413  Choose the proper measuring position. Split the surface soil according to the measured deep.
389 +)))
414 414  
391 +(((
415 415  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
393 +)))
416 416  
395 +(((
417 417  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
397 +)))
418 418  
399 +(((
419 419  Put soil over the probe after insert. And start to measure.
401 +)))
420 420  
403 +(((
404 +
405 +)))
421 421  
407 +(((
422 422  (% style="color:#4f81bd" %)**Measurement inside soil:**
409 +)))
423 423  
411 +(((
424 424  Dig a hole with diameter > 20CM.
413 +)))
425 425  
415 +(((
426 426  Insert the probe inside, method like measure the surface.
417 +)))
427 427  
428 428  
429 429  
... ... @@ -453,9 +453,13 @@
453 453  
454 454  == 2.7 Calibration ==
455 455  
447 +(((
456 456  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
449 +)))
457 457  
451 +(((
458 458  After stable, user can use below command to calibrate.
453 +)))
459 459  
460 460  [[image:image-20220607171149-4.png]]
461 461  
... ... @@ -462,12 +462,10 @@
462 462  
463 463  (% style="color:#037691" %)**Calibration Payload**
464 464  
465 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
466 -|(((
467 -**Size**
468 -
469 -**(bytes)**
470 -)))|**1**|**1**|**1**|**7**|**1**
460 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
461 +|=(% style="width: 62.5px;" %)(((
462 +**Size (bytes)**
463 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
471 471  |**Value**|(((
472 472  PH4
473 473  
... ... @@ -477,7 +477,7 @@
477 477  
478 478  Calibrate value
479 479  )))|Reserve|(((
480 -[[Message Type>>path:#H2.3.6MessageType]]
473 +[[Message Type>>||anchor="H2.3.6MessageType"]]
481 481  
482 482  Always 0x03
483 483  )))
... ... @@ -500,32 +500,61 @@
500 500  
501 501  === 2.8.1 EU863-870 (EU868) ===
502 502  
496 +(((
503 503  (% style="color:blue" %)**Uplink:**
498 +)))
504 504  
500 +(((
505 505  868.1 - SF7BW125 to SF12BW125
502 +)))
506 506  
504 +(((
507 507  868.3 - SF7BW125 to SF12BW125 and SF7BW250
506 +)))
508 508  
508 +(((
509 509  868.5 - SF7BW125 to SF12BW125
510 +)))
510 510  
512 +(((
511 511  867.1 - SF7BW125 to SF12BW125
514 +)))
512 512  
516 +(((
513 513  867.3 - SF7BW125 to SF12BW125
518 +)))
514 514  
520 +(((
515 515  867.5 - SF7BW125 to SF12BW125
522 +)))
516 516  
524 +(((
517 517  867.7 - SF7BW125 to SF12BW125
526 +)))
518 518  
528 +(((
519 519  867.9 - SF7BW125 to SF12BW125
530 +)))
520 520  
532 +(((
521 521  868.8 - FSK
534 +)))
522 522  
536 +(((
537 +
538 +)))
523 523  
540 +(((
524 524  (% style="color:blue" %)**Downlink:**
542 +)))
525 525  
544 +(((
526 526  Uplink channels 1-9 (RX1)
546 +)))
527 527  
548 +(((
528 528  869.525 - SF9BW125 (RX2 downlink only)
550 +)))
529 529  
530 530  
531 531  
... ... @@ -547,49 +547,91 @@
547 547  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
548 548  
549 549  
550 -
551 551  === 2.8.3 CN470-510 (CN470) ===
552 552  
574 +(((
553 553  Used in China, Default use CHE=1
576 +)))
554 554  
578 +(((
555 555  (% style="color:blue" %)**Uplink:**
580 +)))
556 556  
582 +(((
557 557  486.3 - SF7BW125 to SF12BW125
584 +)))
558 558  
586 +(((
559 559  486.5 - SF7BW125 to SF12BW125
588 +)))
560 560  
590 +(((
561 561  486.7 - SF7BW125 to SF12BW125
592 +)))
562 562  
594 +(((
563 563  486.9 - SF7BW125 to SF12BW125
596 +)))
564 564  
598 +(((
565 565  487.1 - SF7BW125 to SF12BW125
600 +)))
566 566  
602 +(((
567 567  487.3 - SF7BW125 to SF12BW125
604 +)))
568 568  
606 +(((
569 569  487.5 - SF7BW125 to SF12BW125
608 +)))
570 570  
610 +(((
571 571  487.7 - SF7BW125 to SF12BW125
612 +)))
572 572  
614 +(((
615 +
616 +)))
573 573  
618 +(((
574 574  (% style="color:blue" %)**Downlink:**
620 +)))
575 575  
622 +(((
576 576  506.7 - SF7BW125 to SF12BW125
624 +)))
577 577  
626 +(((
578 578  506.9 - SF7BW125 to SF12BW125
628 +)))
579 579  
630 +(((
580 580  507.1 - SF7BW125 to SF12BW125
632 +)))
581 581  
634 +(((
582 582  507.3 - SF7BW125 to SF12BW125
636 +)))
583 583  
638 +(((
584 584  507.5 - SF7BW125 to SF12BW125
640 +)))
585 585  
642 +(((
586 586  507.7 - SF7BW125 to SF12BW125
644 +)))
587 587  
646 +(((
588 588  507.9 - SF7BW125 to SF12BW125
648 +)))
589 589  
650 +(((
590 590  508.1 - SF7BW125 to SF12BW125
652 +)))
591 591  
654 +(((
592 592  505.3 - SF12BW125 (RX2 downlink only)
656 +)))
593 593  
594 594  
595 595  
... ... @@ -614,112 +614,219 @@
614 614  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
615 615  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
616 616  
617 -
618 -
619 619  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
620 620  
683 +(((
621 621  (% style="color:blue" %)**Default Uplink channel:**
685 +)))
622 622  
687 +(((
623 623  923.2 - SF7BW125 to SF10BW125
689 +)))
624 624  
691 +(((
625 625  923.4 - SF7BW125 to SF10BW125
693 +)))
626 626  
695 +(((
696 +
697 +)))
627 627  
699 +(((
628 628  (% style="color:blue" %)**Additional Uplink Channel**:
701 +)))
629 629  
703 +(((
630 630  (OTAA mode, channel added by JoinAccept message)
705 +)))
631 631  
707 +(((
708 +
709 +)))
632 632  
711 +(((
633 633  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
713 +)))
634 634  
715 +(((
635 635  922.2 - SF7BW125 to SF10BW125
717 +)))
636 636  
719 +(((
637 637  922.4 - SF7BW125 to SF10BW125
721 +)))
638 638  
723 +(((
639 639  922.6 - SF7BW125 to SF10BW125
725 +)))
640 640  
727 +(((
641 641  922.8 - SF7BW125 to SF10BW125
729 +)))
642 642  
731 +(((
643 643  923.0 - SF7BW125 to SF10BW125
733 +)))
644 644  
735 +(((
645 645  922.0 - SF7BW125 to SF10BW125
737 +)))
646 646  
739 +(((
740 +
741 +)))
647 647  
743 +(((
648 648  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
745 +)))
649 649  
747 +(((
650 650  923.6 - SF7BW125 to SF10BW125
749 +)))
651 651  
751 +(((
652 652  923.8 - SF7BW125 to SF10BW125
753 +)))
653 653  
755 +(((
654 654  924.0 - SF7BW125 to SF10BW125
757 +)))
655 655  
759 +(((
656 656  924.2 - SF7BW125 to SF10BW125
761 +)))
657 657  
763 +(((
658 658  924.4 - SF7BW125 to SF10BW125
765 +)))
659 659  
767 +(((
660 660  924.6 - SF7BW125 to SF10BW125
769 +)))
661 661  
771 +(((
772 +
773 +)))
662 662  
775 +(((
663 663  (% style="color:blue" %)**Downlink:**
777 +)))
664 664  
779 +(((
665 665  Uplink channels 1-8 (RX1)
781 +)))
666 666  
783 +(((
667 667  923.2 - SF10BW125 (RX2)
785 +)))
668 668  
669 669  
670 670  
671 671  === 2.8.6 KR920-923 (KR920) ===
672 672  
791 +(((
673 673  (% style="color:blue" %)**Default channel:**
793 +)))
674 674  
795 +(((
675 675  922.1 - SF7BW125 to SF12BW125
797 +)))
676 676  
799 +(((
677 677  922.3 - SF7BW125 to SF12BW125
801 +)))
678 678  
803 +(((
679 679  922.5 - SF7BW125 to SF12BW125
805 +)))
680 680  
807 +(((
808 +
809 +)))
681 681  
811 +(((
682 682  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
813 +)))
683 683  
815 +(((
684 684  922.1 - SF7BW125 to SF12BW125
817 +)))
685 685  
819 +(((
686 686  922.3 - SF7BW125 to SF12BW125
821 +)))
687 687  
823 +(((
688 688  922.5 - SF7BW125 to SF12BW125
825 +)))
689 689  
827 +(((
690 690  922.7 - SF7BW125 to SF12BW125
829 +)))
691 691  
831 +(((
692 692  922.9 - SF7BW125 to SF12BW125
833 +)))
693 693  
835 +(((
694 694  923.1 - SF7BW125 to SF12BW125
837 +)))
695 695  
839 +(((
696 696  923.3 - SF7BW125 to SF12BW125
841 +)))
697 697  
843 +(((
844 +
845 +)))
698 698  
847 +(((
699 699  (% style="color:blue" %)**Downlink:**
849 +)))
700 700  
851 +(((
701 701  Uplink channels 1-7(RX1)
853 +)))
702 702  
855 +(((
703 703  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
857 +)))
704 704  
705 705  
706 706  
707 707  === 2.8.7 IN865-867 (IN865) ===
708 708  
863 +(((
709 709  (% style="color:blue" %)**Uplink:**
865 +)))
710 710  
867 +(((
711 711  865.0625 - SF7BW125 to SF12BW125
869 +)))
712 712  
871 +(((
713 713  865.4025 - SF7BW125 to SF12BW125
873 +)))
714 714  
875 +(((
715 715  865.9850 - SF7BW125 to SF12BW125
877 +)))
716 716  
879 +(((
880 +
881 +)))
717 717  
883 +(((
718 718  (% style="color:blue" %)**Downlink:**
885 +)))
719 719  
887 +(((
720 720  Uplink channels 1-3 (RX1)
889 +)))
721 721  
891 +(((
722 722  866.550 - SF10BW125 (RX2)
893 +)))
723 723  
724 724  
725 725  
... ... @@ -730,8 +730,6 @@
730 730  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
731 731  * Blink once when device transmit a packet.
732 732  
733 -
734 -
735 735  == 2.10 ​Firmware Change Log ==
736 736  
737 737  
... ... @@ -746,26 +746,51 @@
746 746  
747 747  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
748 748  
918 +(((
749 749  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
920 +)))
750 750  
751 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
752 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
922 +* (((
923 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
924 +)))
925 +* (((
926 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
927 +)))
753 753  
929 +(((
754 754  There are two kinds of commands to configure LSPH01, they are:
931 +)))
755 755  
756 -* (% style="color:#4f81bd" %)** General Commands**.
933 +* (((
934 +(% style="color:#4f81bd" %)** General Commands**.
935 +)))
757 757  
937 +(((
758 758  These commands are to configure:
939 +)))
759 759  
760 -* General system settings like: uplink interval.
761 -* LoRaWAN protocol & radio related command.
941 +* (((
942 +General system settings like: uplink interval.
943 +)))
944 +* (((
945 +LoRaWAN protocol & radio related command.
946 +)))
762 762  
948 +(((
763 763  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
950 +)))
764 764  
952 +(((
953 +
954 +)))
765 765  
766 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
956 +* (((
957 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
958 +)))
767 767  
960 +(((
768 768  These commands only valid for LSPH01, as below:
962 +)))
769 769  
770 770  
771 771  
... ... @@ -779,16 +779,28 @@
779 779  
780 780  
781 781  
976 +(((
782 782  (% style="color:#037691" %)**Downlink Command: 0x01**
978 +)))
783 783  
980 +(((
784 784  Format: Command Code (0x01) followed by 3 bytes time value.
982 +)))
785 785  
984 +(((
786 786  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
986 +)))
787 787  
788 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
789 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
988 +* (((
989 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
990 +)))
991 +* (((
992 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
790 790  
791 791  
995 +
996 +)))
997 +
792 792  == 3.2 Set Interrupt Mode ==
793 793  
794 794  Feature, Set Interrupt mode for GPIO_EXIT.
... ... @@ -798,20 +798,34 @@
798 798  [[image:image-20220607171716-9.png]]
799 799  
800 800  
1007 +(((
801 801  (% style="color:#037691" %)**Downlink Command: 0x06**
1009 +)))
802 802  
1011 +(((
803 803  Format: Command Code (0x06) followed by 3 bytes.
1013 +)))
804 804  
1015 +(((
805 805  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1017 +)))
806 806  
807 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
808 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1019 +* (((
1020 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1021 +)))
1022 +* (((
1023 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1024 +)))
809 809  
1026 +(((
1027 +
1028 +)))
810 810  
811 811  
1031 +
812 812  == 3.3 Calibrate Sensor ==
813 813  
814 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1034 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
815 815  
816 816  
817 817  
... ... @@ -843,7 +843,7 @@
843 843  
844 844  Version
845 845  )))|Sensor Type|Reserve|(((
846 -[[Message Type>>path:#H2.3.6MessageType]]
1066 +[[Message Type>>||anchor="H2.3.6MessageType"]]
847 847  Always 0x02
848 848  )))
849 849  
... ... @@ -983,9 +983,13 @@
983 983  
984 984  === ​4.3.2 Replace the battery ===
985 985  
1206 +(((
986 986  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1208 +)))
987 987  
1210 +(((
988 988  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1212 +)))
989 989  
990 990  
991 991  
... ... @@ -1006,24 +1006,24 @@
1006 1006  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1007 1007  
1008 1008  
1233 +(((
1009 1009  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1235 +)))
1010 1010  
1011 1011  
1012 1012   [[image:1654593712276-618.png]]
1013 1013  
1014 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1240 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1015 1015  
1016 1016  
1017 -
1018 1018  = 6. FAQ =
1019 1019  
1020 1020  == 6.1 How to change the LoRa Frequency Bands/Region ==
1021 1021  
1022 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1247 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1023 1023  When downloading the images, choose the required image file for download. ​
1024 1024  
1025 1025  
1026 -
1027 1027  = 7. Trouble Shooting =
1028 1028  
1029 1029  == 7.1 AT Commands input doesn’t work ==
... ... @@ -1048,8 +1048,6 @@
1048 1048  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1049 1049  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1050 1050  
1051 -
1052 -
1053 1053  = 9. ​Packing Info =
1054 1054  
1055 1055  
... ... @@ -1064,8 +1064,6 @@
1064 1064  * Package Size / pcs : cm
1065 1065  * Weight / pcs : g
1066 1066  
1067 -
1068 -
1069 1069  = 10. ​Support =
1070 1070  
1071 1071  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1654826112831-311.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +257.0 KB
Content
1654826306458-414.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +109.3 KB
Content
image-20220610095606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +183.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0