Last modified by Xiaoling on 2025/04/24 17:18
<
From version < 73.2 >
edited by Xiaoling
on 2022/06/07 17:24
To version < 88.4 >
edited by Xiaoling
on 2022/06/10 10:10
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LSPH01-LoRaWAN Soil pH Sensor User Manual
1 +LLDS12-LoRaWAN LiDAR ToF Distance Sensor User Manual
Content
... ... @@ -1,65 +1,9 @@
1 1  (% style="text-align:center" %)
2 -[[image:1654592399090-860.png||height="521" width="483"]]
2 +[[image:image-20220610095606-1.png]]
3 3  
4 4  
5 -
6 -
7 7  **Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 65  
... ... @@ -66,25 +66,29 @@
66 66  
67 67  
68 68  
13 += 1. Introduction =
69 69  
15 +== 1.1 ​What is LoRaWAN LiDAR ToF Distance Sensor ==
70 70  
17 +(((
18 +
71 71  
72 -= 1. Introduction =
20 +The Dragino LLDS12 is a (% style="color:blue" %)**LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor**(%%) for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
73 73  
74 -== 1.1 ​What is LoRaWAN Soil pH Sensor ==
22 +The LLDS12 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
75 75  
76 -The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
24 +It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
77 77  
78 -LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
26 +The LoRa wireless technology used in LLDS12 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
79 79  
80 -The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
28 +LLDS12 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
81 81  
82 -LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
30 +Each LLDS12 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
31 +)))
83 83  
84 -Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
85 85  
34 +[[image:1654826306458-414.png]]
86 86  
87 -[[image:1654592435432-887.png]]
88 88  
89 89  
90 90  
... ... @@ -92,16 +92,14 @@
92 92  
93 93  * LoRaWAN 1.0.3 Class A
94 94  * Ultra-low power consumption
95 -* Monitor soil pH with temperature compensation.
96 -* Monitor soil temperature
43 +* Laser technology for distance detection
44 +* Operating Range - 0.1m~~12m①
45 +* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
97 97  * Monitor Battery Level
98 -* Support pH calibration by end user
99 99  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
100 100  * AT Commands to change parameters
101 101  * Uplink on periodically
102 102  * Downlink to change configure
103 -* IP66 Waterproof Enclosure
104 -* IP68 rate for the Sensor Probe
105 105  * 8500mAh Battery for long term use
106 106  
107 107  
... ... @@ -127,6 +127,9 @@
127 127  * IP68 Protection
128 128  * Length: 3.5 meters
129 129  
76 +
77 +
78 +
130 130  == 1.4 ​Applications ==
131 131  
132 132  * Smart Agriculture
... ... @@ -146,7 +146,7 @@
146 146  )))
147 147  
148 148  (((
149 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
98 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
150 150  )))
151 151  
152 152  
... ... @@ -209,7 +209,9 @@
209 209  [[image:image-20220607170442-2.png]]
210 210  
211 211  
161 +(((
212 212  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
163 +)))
213 213  
214 214  [[image:1654592697690-910.png]]
215 215  
... ... @@ -217,26 +217,30 @@
217 217  
218 218  == 2.3 ​Uplink Payload ==
219 219  
171 +(((
220 220  LSPH01 will uplink payload via LoRaWAN with below payload format: 
173 +)))
221 221  
175 +(((
222 222  Uplink payload includes in total 11 bytes.
177 +)))
223 223  
179 +(((
224 224  Normal uplink payload:
181 +)))
225 225  
226 226  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
227 -|(((
228 -**Size**
184 +|=(% style="width: 62.5px;" %)(((
185 +**Size (bytes)**
186 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
187 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
188 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
229 229  
230 -**(bytes)**
231 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
232 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
233 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
234 -
235 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
236 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
237 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
190 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
191 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
192 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
238 238  )))|Reserve|(((
239 -[[Message Type>>path:#H2.3.6MessageType]]
194 +[[Message Type>>||anchor="H2.3.6MessageType"]]
240 240  )))
241 241  
242 242  [[image:1654592721645-318.png]]
... ... @@ -292,7 +292,7 @@
292 292  
293 293  === 2.3.5 Interrupt Pin ===
294 294  
295 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
250 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
296 296  
297 297  
298 298  **Example:**
... ... @@ -305,18 +305,21 @@
305 305  
306 306  === 2.3.6 Message Type ===
307 307  
263 +(((
308 308  For a normal uplink payload, the message type is always 0x01.
265 +)))
309 309  
267 +(((
310 310  Valid Message Type:
269 +)))
311 311  
312 312  
313 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
314 -|**Message Type Code**|**Description**|**Payload**
315 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
316 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
317 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
272 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
273 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
274 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
275 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
276 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
318 318  
319 -
320 320  === 2.3.7 Decode payload in The Things Network ===
321 321  
322 322  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -336,18 +336,27 @@
336 336  
337 337  == 2.4 Uplink Interval ==
338 338  
339 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
297 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
340 340  
341 341  
342 342  
343 343  == 2.5 ​Show Data in DataCake IoT Server ==
344 344  
303 +(((
345 345  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
305 +)))
346 346  
307 +(((
308 +
309 +)))
347 347  
311 +(((
348 348  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
313 +)))
349 349  
315 +(((
350 350  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
317 +)))
351 351  
352 352  
353 353  [[image:1654592790040-760.png]]
... ... @@ -370,9 +370,13 @@
370 370  [[image:1654592856403-259.png]]
371 371  
372 372  
340 +(((
373 373  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
342 +)))
374 374  
344 +(((
375 375  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
346 +)))
376 376  
377 377  
378 378  [[image:1654592878525-845.png]]
... ... @@ -395,8 +395,10 @@
395 395  === 2.6.1 Before measurement ===
396 396  
397 397  (((
369 +(((
398 398  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
399 399  )))
372 +)))
400 400  
401 401  
402 402  
... ... @@ -403,24 +403,45 @@
403 403  === 2.6.2 Measurement ===
404 404  
405 405  
379 +(((
406 406  (% style="color:#4f81bd" %)**Measurement the soil surface:**
381 +)))
407 407  
383 +(((
408 408  [[image:1654592946732-634.png]]
385 +)))
409 409  
387 +(((
410 410  Choose the proper measuring position. Split the surface soil according to the measured deep.
389 +)))
411 411  
391 +(((
412 412  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
393 +)))
413 413  
395 +(((
414 414  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
397 +)))
415 415  
399 +(((
416 416  Put soil over the probe after insert. And start to measure.
401 +)))
417 417  
403 +(((
404 +
405 +)))
418 418  
407 +(((
419 419  (% style="color:#4f81bd" %)**Measurement inside soil:**
409 +)))
420 420  
411 +(((
421 421  Dig a hole with diameter > 20CM.
413 +)))
422 422  
415 +(((
423 423  Insert the probe inside, method like measure the surface.
417 +)))
424 424  
425 425  
426 426  
... ... @@ -450,9 +450,13 @@
450 450  
451 451  == 2.7 Calibration ==
452 452  
447 +(((
453 453  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
449 +)))
454 454  
451 +(((
455 455  After stable, user can use below command to calibrate.
453 +)))
456 456  
457 457  [[image:image-20220607171149-4.png]]
458 458  
... ... @@ -459,12 +459,10 @@
459 459  
460 460  (% style="color:#037691" %)**Calibration Payload**
461 461  
462 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
463 -|(((
464 -**Size**
465 -
466 -**(bytes)**
467 -)))|**1**|**1**|**1**|**7**|**1**
460 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
461 +|=(% style="width: 62.5px;" %)(((
462 +**Size (bytes)**
463 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
468 468  |**Value**|(((
469 469  PH4
470 470  
... ... @@ -474,7 +474,7 @@
474 474  
475 475  Calibrate value
476 476  )))|Reserve|(((
477 -[[Message Type>>path:#H2.3.6MessageType]]
473 +[[Message Type>>||anchor="H2.3.6MessageType"]]
478 478  
479 479  Always 0x03
480 480  )))
... ... @@ -497,32 +497,61 @@
497 497  
498 498  === 2.8.1 EU863-870 (EU868) ===
499 499  
496 +(((
500 500  (% style="color:blue" %)**Uplink:**
498 +)))
501 501  
500 +(((
502 502  868.1 - SF7BW125 to SF12BW125
502 +)))
503 503  
504 +(((
504 504  868.3 - SF7BW125 to SF12BW125 and SF7BW250
506 +)))
505 505  
508 +(((
506 506  868.5 - SF7BW125 to SF12BW125
510 +)))
507 507  
512 +(((
508 508  867.1 - SF7BW125 to SF12BW125
514 +)))
509 509  
516 +(((
510 510  867.3 - SF7BW125 to SF12BW125
518 +)))
511 511  
520 +(((
512 512  867.5 - SF7BW125 to SF12BW125
522 +)))
513 513  
524 +(((
514 514  867.7 - SF7BW125 to SF12BW125
526 +)))
515 515  
528 +(((
516 516  867.9 - SF7BW125 to SF12BW125
530 +)))
517 517  
532 +(((
518 518  868.8 - FSK
534 +)))
519 519  
536 +(((
537 +
538 +)))
520 520  
540 +(((
521 521  (% style="color:blue" %)**Downlink:**
542 +)))
522 522  
544 +(((
523 523  Uplink channels 1-9 (RX1)
546 +)))
524 524  
548 +(((
525 525  869.525 - SF9BW125 (RX2 downlink only)
550 +)))
526 526  
527 527  
528 528  
... ... @@ -544,49 +544,91 @@
544 544  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
545 545  
546 546  
547 -
548 548  === 2.8.3 CN470-510 (CN470) ===
549 549  
574 +(((
550 550  Used in China, Default use CHE=1
576 +)))
551 551  
578 +(((
552 552  (% style="color:blue" %)**Uplink:**
580 +)))
553 553  
582 +(((
554 554  486.3 - SF7BW125 to SF12BW125
584 +)))
555 555  
586 +(((
556 556  486.5 - SF7BW125 to SF12BW125
588 +)))
557 557  
590 +(((
558 558  486.7 - SF7BW125 to SF12BW125
592 +)))
559 559  
594 +(((
560 560  486.9 - SF7BW125 to SF12BW125
596 +)))
561 561  
598 +(((
562 562  487.1 - SF7BW125 to SF12BW125
600 +)))
563 563  
602 +(((
564 564  487.3 - SF7BW125 to SF12BW125
604 +)))
565 565  
606 +(((
566 566  487.5 - SF7BW125 to SF12BW125
608 +)))
567 567  
610 +(((
568 568  487.7 - SF7BW125 to SF12BW125
612 +)))
569 569  
614 +(((
615 +
616 +)))
570 570  
618 +(((
571 571  (% style="color:blue" %)**Downlink:**
620 +)))
572 572  
622 +(((
573 573  506.7 - SF7BW125 to SF12BW125
624 +)))
574 574  
626 +(((
575 575  506.9 - SF7BW125 to SF12BW125
628 +)))
576 576  
630 +(((
577 577  507.1 - SF7BW125 to SF12BW125
632 +)))
578 578  
634 +(((
579 579  507.3 - SF7BW125 to SF12BW125
636 +)))
580 580  
638 +(((
581 581  507.5 - SF7BW125 to SF12BW125
640 +)))
582 582  
642 +(((
583 583  507.7 - SF7BW125 to SF12BW125
644 +)))
584 584  
646 +(((
585 585  507.9 - SF7BW125 to SF12BW125
648 +)))
586 586  
650 +(((
587 587  508.1 - SF7BW125 to SF12BW125
652 +)))
588 588  
654 +(((
589 589  505.3 - SF12BW125 (RX2 downlink only)
656 +)))
590 590  
591 591  
592 592  
... ... @@ -611,112 +611,219 @@
611 611  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
612 612  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
613 613  
614 -
615 -
616 616  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
617 617  
683 +(((
618 618  (% style="color:blue" %)**Default Uplink channel:**
685 +)))
619 619  
687 +(((
620 620  923.2 - SF7BW125 to SF10BW125
689 +)))
621 621  
691 +(((
622 622  923.4 - SF7BW125 to SF10BW125
693 +)))
623 623  
695 +(((
696 +
697 +)))
624 624  
699 +(((
625 625  (% style="color:blue" %)**Additional Uplink Channel**:
701 +)))
626 626  
703 +(((
627 627  (OTAA mode, channel added by JoinAccept message)
705 +)))
628 628  
707 +(((
708 +
709 +)))
629 629  
711 +(((
630 630  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
713 +)))
631 631  
715 +(((
632 632  922.2 - SF7BW125 to SF10BW125
717 +)))
633 633  
719 +(((
634 634  922.4 - SF7BW125 to SF10BW125
721 +)))
635 635  
723 +(((
636 636  922.6 - SF7BW125 to SF10BW125
725 +)))
637 637  
727 +(((
638 638  922.8 - SF7BW125 to SF10BW125
729 +)))
639 639  
731 +(((
640 640  923.0 - SF7BW125 to SF10BW125
733 +)))
641 641  
735 +(((
642 642  922.0 - SF7BW125 to SF10BW125
737 +)))
643 643  
739 +(((
740 +
741 +)))
644 644  
743 +(((
645 645  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
745 +)))
646 646  
747 +(((
647 647  923.6 - SF7BW125 to SF10BW125
749 +)))
648 648  
751 +(((
649 649  923.8 - SF7BW125 to SF10BW125
753 +)))
650 650  
755 +(((
651 651  924.0 - SF7BW125 to SF10BW125
757 +)))
652 652  
759 +(((
653 653  924.2 - SF7BW125 to SF10BW125
761 +)))
654 654  
763 +(((
655 655  924.4 - SF7BW125 to SF10BW125
765 +)))
656 656  
767 +(((
657 657  924.6 - SF7BW125 to SF10BW125
769 +)))
658 658  
771 +(((
772 +
773 +)))
659 659  
775 +(((
660 660  (% style="color:blue" %)**Downlink:**
777 +)))
661 661  
779 +(((
662 662  Uplink channels 1-8 (RX1)
781 +)))
663 663  
783 +(((
664 664  923.2 - SF10BW125 (RX2)
785 +)))
665 665  
666 666  
667 667  
668 668  === 2.8.6 KR920-923 (KR920) ===
669 669  
791 +(((
670 670  (% style="color:blue" %)**Default channel:**
793 +)))
671 671  
795 +(((
672 672  922.1 - SF7BW125 to SF12BW125
797 +)))
673 673  
799 +(((
674 674  922.3 - SF7BW125 to SF12BW125
801 +)))
675 675  
803 +(((
676 676  922.5 - SF7BW125 to SF12BW125
805 +)))
677 677  
807 +(((
808 +
809 +)))
678 678  
811 +(((
679 679  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
813 +)))
680 680  
815 +(((
681 681  922.1 - SF7BW125 to SF12BW125
817 +)))
682 682  
819 +(((
683 683  922.3 - SF7BW125 to SF12BW125
821 +)))
684 684  
823 +(((
685 685  922.5 - SF7BW125 to SF12BW125
825 +)))
686 686  
827 +(((
687 687  922.7 - SF7BW125 to SF12BW125
829 +)))
688 688  
831 +(((
689 689  922.9 - SF7BW125 to SF12BW125
833 +)))
690 690  
835 +(((
691 691  923.1 - SF7BW125 to SF12BW125
837 +)))
692 692  
839 +(((
693 693  923.3 - SF7BW125 to SF12BW125
841 +)))
694 694  
843 +(((
844 +
845 +)))
695 695  
847 +(((
696 696  (% style="color:blue" %)**Downlink:**
849 +)))
697 697  
851 +(((
698 698  Uplink channels 1-7(RX1)
853 +)))
699 699  
855 +(((
700 700  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
857 +)))
701 701  
702 702  
703 703  
704 704  === 2.8.7 IN865-867 (IN865) ===
705 705  
863 +(((
706 706  (% style="color:blue" %)**Uplink:**
865 +)))
707 707  
867 +(((
708 708  865.0625 - SF7BW125 to SF12BW125
869 +)))
709 709  
871 +(((
710 710  865.4025 - SF7BW125 to SF12BW125
873 +)))
711 711  
875 +(((
712 712  865.9850 - SF7BW125 to SF12BW125
877 +)))
713 713  
879 +(((
880 +
881 +)))
714 714  
883 +(((
715 715  (% style="color:blue" %)**Downlink:**
885 +)))
716 716  
887 +(((
717 717  Uplink channels 1-3 (RX1)
889 +)))
718 718  
891 +(((
719 719  866.550 - SF10BW125 (RX2)
893 +)))
720 720  
721 721  
722 722  
... ... @@ -727,8 +727,6 @@
727 727  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
728 728  * Blink once when device transmit a packet.
729 729  
730 -
731 -
732 732  == 2.10 ​Firmware Change Log ==
733 733  
734 734  
... ... @@ -743,26 +743,51 @@
743 743  
744 744  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
745 745  
918 +(((
746 746  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
920 +)))
747 747  
748 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
749 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
922 +* (((
923 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
924 +)))
925 +* (((
926 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
927 +)))
750 750  
929 +(((
751 751  There are two kinds of commands to configure LSPH01, they are:
931 +)))
752 752  
753 -* (% style="color:#4f81bd" %)** General Commands**.
933 +* (((
934 +(% style="color:#4f81bd" %)** General Commands**.
935 +)))
754 754  
937 +(((
755 755  These commands are to configure:
939 +)))
756 756  
757 -* General system settings like: uplink interval.
758 -* LoRaWAN protocol & radio related command.
941 +* (((
942 +General system settings like: uplink interval.
943 +)))
944 +* (((
945 +LoRaWAN protocol & radio related command.
946 +)))
759 759  
948 +(((
760 760  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
950 +)))
761 761  
952 +(((
953 +
954 +)))
762 762  
763 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
956 +* (((
957 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
958 +)))
764 764  
960 +(((
765 765  These commands only valid for LSPH01, as below:
962 +)))
766 766  
767 767  
768 768  
... ... @@ -776,16 +776,28 @@
776 776  
777 777  
778 778  
976 +(((
779 779  (% style="color:#037691" %)**Downlink Command: 0x01**
978 +)))
780 780  
980 +(((
781 781  Format: Command Code (0x01) followed by 3 bytes time value.
982 +)))
782 782  
984 +(((
783 783  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
986 +)))
784 784  
785 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
786 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
988 +* (((
989 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
990 +)))
991 +* (((
992 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
787 787  
788 788  
995 +
996 +)))
997 +
789 789  == 3.2 Set Interrupt Mode ==
790 790  
791 791  Feature, Set Interrupt mode for GPIO_EXIT.
... ... @@ -795,20 +795,34 @@
795 795  [[image:image-20220607171716-9.png]]
796 796  
797 797  
1007 +(((
798 798  (% style="color:#037691" %)**Downlink Command: 0x06**
1009 +)))
799 799  
1011 +(((
800 800  Format: Command Code (0x06) followed by 3 bytes.
1013 +)))
801 801  
1015 +(((
802 802  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1017 +)))
803 803  
804 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
805 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1019 +* (((
1020 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1021 +)))
1022 +* (((
1023 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1024 +)))
806 806  
1026 +(((
1027 +
1028 +)))
807 807  
808 808  
1031 +
809 809  == 3.3 Calibrate Sensor ==
810 810  
811 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1034 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
812 812  
813 813  
814 814  
... ... @@ -840,7 +840,7 @@
840 840  
841 841  Version
842 842  )))|Sensor Type|Reserve|(((
843 -[[Message Type>>path:#H2.3.6MessageType]]
1066 +[[Message Type>>||anchor="H2.3.6MessageType"]]
844 844  Always 0x02
845 845  )))
846 846  
... ... @@ -980,9 +980,13 @@
980 980  
981 981  === ​4.3.2 Replace the battery ===
982 982  
1206 +(((
983 983  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1208 +)))
984 984  
1210 +(((
985 985  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1212 +)))
986 986  
987 987  
988 988  
... ... @@ -1003,24 +1003,24 @@
1003 1003  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1004 1004  
1005 1005  
1233 +(((
1006 1006  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1235 +)))
1007 1007  
1008 1008  
1009 1009   [[image:1654593712276-618.png]]
1010 1010  
1011 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1240 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1012 1012  
1013 1013  
1014 -
1015 1015  = 6. FAQ =
1016 1016  
1017 1017  == 6.1 How to change the LoRa Frequency Bands/Region ==
1018 1018  
1019 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1247 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1020 1020  When downloading the images, choose the required image file for download. ​
1021 1021  
1022 1022  
1023 -
1024 1024  = 7. Trouble Shooting =
1025 1025  
1026 1026  == 7.1 AT Commands input doesn’t work ==
... ... @@ -1045,8 +1045,6 @@
1045 1045  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1046 1046  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1047 1047  
1048 -
1049 -
1050 1050  = 9. ​Packing Info =
1051 1051  
1052 1052  
... ... @@ -1061,8 +1061,6 @@
1061 1061  * Package Size / pcs : cm
1062 1062  * Weight / pcs : g
1063 1063  
1064 -
1065 -
1066 1066  = 10. ​Support =
1067 1067  
1068 1068  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1654826112831-311.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +257.0 KB
Content
1654826306458-414.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +109.3 KB
Content
image-20220610095606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +183.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0