Last modified by Xiaoling on 2025/04/24 17:18
<
From version < 73.14 >
edited by Xiaoling
on 2022/06/07 17:41
To version < 90.2 >
edited by Xiaoling
on 2022/06/10 10:13
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LSPH01-LoRaWAN Soil pH Sensor User Manual
1 +LLDS12-LoRaWAN LiDAR ToF Distance Sensor User Manual
Content
... ... @@ -1,65 +1,9 @@
1 1  (% style="text-align:center" %)
2 -[[image:1654592399090-860.png||height="521" width="483"]]
2 +[[image:image-20220610095606-1.png]]
3 3  
4 4  
5 -
6 -
7 7  **Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 65  
... ... @@ -66,34 +66,28 @@
66 66  
67 67  
68 68  
69 -
70 -
71 71  = 1. Introduction =
72 72  
73 -== 1.1 ​What is LoRaWAN Soil pH Sensor ==
15 +== 1.1 ​What is LoRaWAN LiDAR ToF Distance Sensor ==
74 74  
75 75  (((
76 -The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
77 -)))
18 +
78 78  
79 -(((
80 -LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
81 -)))
20 +The Dragino LLDS12 is a (% style="color:blue" %)**LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor**(%%) for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
82 82  
83 -(((
84 -The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
85 -)))
22 +The LLDS12 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
86 86  
87 -(((
88 -LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
89 -)))
24 +It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
90 90  
91 -(((
92 -Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
26 +The LoRa wireless technology used in LLDS12 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
27 +
28 +LLDS12 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
29 +
30 +Each LLDS12 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
93 93  )))
94 94  
95 95  
96 -[[image:1654592435432-887.png]]
34 +[[image:1654826306458-414.png]]
97 97  
98 98  
99 99  
... ... @@ -101,48 +101,48 @@
101 101  
102 102  * LoRaWAN 1.0.3 Class A
103 103  * Ultra-low power consumption
104 -* Monitor soil pH with temperature compensation.
105 -* Monitor soil temperature
42 +* Laser technology for distance detection
43 +* Operating Range - 0.1m~~12m①
44 +* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
106 106  * Monitor Battery Level
107 -* Support pH calibration by end user
108 108  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
109 109  * AT Commands to change parameters
110 110  * Uplink on periodically
111 111  * Downlink to change configure
112 -* IP66 Waterproof Enclosure
113 -* IP68 rate for the Sensor Probe
114 114  * 8500mAh Battery for long term use
115 115  
116 116  
117 -
118 118  == 1.3 Probe Specification ==
119 119  
120 120  
121 -(% style="color:#4f81bd" %)**Soil pH:**
56 +* Storage temperature ：-20℃~~75℃
57 +* Operating temperature - -20℃~~60℃
58 +* Operating Range - 0.1m~~12m①
59 +* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
60 +* Distance resolution - 5mm
61 +* Ambient light immunity - 70klux
62 +* Enclosure rating - IP65
63 +* Light source - LED
64 +* Central wavelength - 850nm
65 +* FOV - 3.6°
66 +* Material of enclosure - ABS+PC
67 +* Wire length - 25cm
122 122  
123 -* Range: 3 ~~ 10 pH
124 -* Resolution: 0.01 pH
125 -* Accuracy: ±2% under (0~~50 ℃, Accuracy will poor under 0 due to frozen)
126 -* Temperature Compensation Range: 0 ~~ 50℃
127 -* IP68 Protection
128 -* Length: 3.5 meters
129 129  
130 -(% style="color:#4f81bd" %)**Soil Temperature:**
70 +(% class="wikigeneratedid" %)
71 +== 1.4 Probe Dimension ==
131 131  
132 -* Range -40℃～85℃
133 -* Resolution: 0.1℃
134 -* Accuracy: <±0.5℃(-10℃～40℃)，<±0.8℃ (others)
135 -* IP68 Protection
136 -* Length: 3.5 meters
137 137  
74 +[[image:1654827224480-952.png]]
138 138  
139 139  
77 +
78 +
140 140  == 1.4 ​Applications ==
141 141  
142 142  * Smart Agriculture
143 143  
144 144  
145 -
146 146  == 1.5 Pin mapping and power on ==
147 147  
148 148  [[image:1654592472094-134.png]]
... ... @@ -158,7 +158,7 @@
158 158  )))
159 159  
160 160  (((
161 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
99 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
162 162  )))
163 163  
164 164  
... ... @@ -244,19 +244,17 @@
244 244  )))
245 245  
246 246  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
247 -|(((
248 -**Size**
185 +|=(% style="width: 62.5px;" %)(((
186 +**Size (bytes)**
187 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
188 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
189 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
249 249  
250 -**(bytes)**
251 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
252 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
253 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
254 -
255 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
256 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
257 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
191 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
192 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
193 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
258 258  )))|Reserve|(((
259 -[[Message Type>>path:#H2.3.6MessageType]]
195 +[[Message Type>>||anchor="H2.3.6MessageType"]]
260 260  )))
261 261  
262 262  [[image:1654592721645-318.png]]
... ... @@ -312,7 +312,7 @@
312 312  
313 313  === 2.3.5 Interrupt Pin ===
314 314  
315 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
251 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
316 316  
317 317  
318 318  **Example:**
... ... @@ -325,20 +325,21 @@
325 325  
326 326  === 2.3.6 Message Type ===
327 327  
264 +(((
328 328  For a normal uplink payload, the message type is always 0x01.
266 +)))
329 329  
268 +(((
330 330  Valid Message Type:
270 +)))
331 331  
332 332  
333 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
334 -|**Message Type Code**|**Description**|**Payload**
335 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
336 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
337 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
273 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
274 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
275 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
276 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
277 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
338 338  
339 -
340 -
341 -
342 342  === 2.3.7 Decode payload in The Things Network ===
343 343  
344 344  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -358,18 +358,27 @@
358 358  
359 359  == 2.4 Uplink Interval ==
360 360  
361 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
298 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
362 362  
363 363  
364 364  
365 365  == 2.5 ​Show Data in DataCake IoT Server ==
366 366  
304 +(((
367 367  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
306 +)))
368 368  
308 +(((
309 +
310 +)))
369 369  
312 +(((
370 370  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
314 +)))
371 371  
316 +(((
372 372  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
318 +)))
373 373  
374 374  
375 375  [[image:1654592790040-760.png]]
... ... @@ -392,9 +392,13 @@
392 392  [[image:1654592856403-259.png]]
393 393  
394 394  
341 +(((
395 395  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
343 +)))
396 396  
345 +(((
397 397  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
347 +)))
398 398  
399 399  
400 400  [[image:1654592878525-845.png]]
... ... @@ -417,8 +417,10 @@
417 417  === 2.6.1 Before measurement ===
418 418  
419 419  (((
370 +(((
420 420  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
421 421  )))
373 +)))
422 422  
423 423  
424 424  
... ... @@ -425,24 +425,45 @@
425 425  === 2.6.2 Measurement ===
426 426  
427 427  
380 +(((
428 428  (% style="color:#4f81bd" %)**Measurement the soil surface:**
382 +)))
429 429  
384 +(((
430 430  [[image:1654592946732-634.png]]
386 +)))
431 431  
388 +(((
432 432  Choose the proper measuring position. Split the surface soil according to the measured deep.
390 +)))
433 433  
392 +(((
434 434  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
394 +)))
435 435  
396 +(((
436 436  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
398 +)))
437 437  
400 +(((
438 438  Put soil over the probe after insert. And start to measure.
402 +)))
439 439  
404 +(((
405 +
406 +)))
440 440  
408 +(((
441 441  (% style="color:#4f81bd" %)**Measurement inside soil:**
410 +)))
442 442  
412 +(((
443 443  Dig a hole with diameter > 20CM.
414 +)))
444 444  
416 +(((
445 445  Insert the probe inside, method like measure the surface.
418 +)))
446 446  
447 447  
448 448  
... ... @@ -472,9 +472,13 @@
472 472  
473 473  == 2.7 Calibration ==
474 474  
448 +(((
475 475  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
450 +)))
476 476  
452 +(((
477 477  After stable, user can use below command to calibrate.
454 +)))
478 478  
479 479  [[image:image-20220607171149-4.png]]
480 480  
... ... @@ -481,12 +481,10 @@
481 481  
482 482  (% style="color:#037691" %)**Calibration Payload**
483 483  
484 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
485 -|(((
486 -**Size**
487 -
488 -**(bytes)**
489 -)))|**1**|**1**|**1**|**7**|**1**
461 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
462 +|=(% style="width: 62.5px;" %)(((
463 +**Size (bytes)**
464 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
490 490  |**Value**|(((
491 491  PH4
492 492  
... ... @@ -496,7 +496,7 @@
496 496  
497 497  Calibrate value
498 498  )))|Reserve|(((
499 -[[Message Type>>path:#H2.3.6MessageType]]
474 +[[Message Type>>||anchor="H2.3.6MessageType"]]
500 500  
501 501  Always 0x03
502 502  )))
... ... @@ -509,9 +509,6 @@
509 509  * Reply to the confirmation package: 14 01
510 510  * Reply to non-confirmed packet: 14 00
511 511  
512 -
513 -
514 -
515 515  == 2.8 Frequency Plans ==
516 516  
517 517  (((
... ... @@ -521,32 +521,61 @@
521 521  
522 522  === 2.8.1 EU863-870 (EU868) ===
523 523  
496 +(((
524 524  (% style="color:blue" %)**Uplink:**
498 +)))
525 525  
500 +(((
526 526  868.1 - SF7BW125 to SF12BW125
502 +)))
527 527  
504 +(((
528 528  868.3 - SF7BW125 to SF12BW125 and SF7BW250
506 +)))
529 529  
508 +(((
530 530  868.5 - SF7BW125 to SF12BW125
510 +)))
531 531  
512 +(((
532 532  867.1 - SF7BW125 to SF12BW125
514 +)))
533 533  
516 +(((
534 534  867.3 - SF7BW125 to SF12BW125
518 +)))
535 535  
520 +(((
536 536  867.5 - SF7BW125 to SF12BW125
522 +)))
537 537  
524 +(((
538 538  867.7 - SF7BW125 to SF12BW125
526 +)))
539 539  
528 +(((
540 540  867.9 - SF7BW125 to SF12BW125
530 +)))
541 541  
532 +(((
542 542  868.8 - FSK
534 +)))
543 543  
536 +(((
537 +
538 +)))
544 544  
540 +(((
545 545  (% style="color:blue" %)**Downlink:**
542 +)))
546 546  
544 +(((
547 547  Uplink channels 1-9 (RX1)
546 +)))
548 548  
548 +(((
549 549  869.525 - SF9BW125 (RX2 downlink only)
550 +)))
550 550  
551 551  
552 552  
... ... @@ -567,49 +567,91 @@
567 567  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
568 568  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
569 569  
570 -
571 571  === 2.8.3 CN470-510 (CN470) ===
572 572  
573 +(((
573 573  Used in China, Default use CHE=1
575 +)))
574 574  
577 +(((
575 575  (% style="color:blue" %)**Uplink:**
579 +)))
576 576  
581 +(((
577 577  486.3 - SF7BW125 to SF12BW125
583 +)))
578 578  
585 +(((
579 579  486.5 - SF7BW125 to SF12BW125
587 +)))
580 580  
589 +(((
581 581  486.7 - SF7BW125 to SF12BW125
591 +)))
582 582  
593 +(((
583 583  486.9 - SF7BW125 to SF12BW125
595 +)))
584 584  
597 +(((
585 585  487.1 - SF7BW125 to SF12BW125
599 +)))
586 586  
601 +(((
587 587  487.3 - SF7BW125 to SF12BW125
603 +)))
588 588  
605 +(((
589 589  487.5 - SF7BW125 to SF12BW125
607 +)))
590 590  
609 +(((
591 591  487.7 - SF7BW125 to SF12BW125
611 +)))
592 592  
613 +(((
614 +
615 +)))
593 593  
617 +(((
594 594  (% style="color:blue" %)**Downlink:**
619 +)))
595 595  
621 +(((
596 596  506.7 - SF7BW125 to SF12BW125
623 +)))
597 597  
625 +(((
598 598  506.9 - SF7BW125 to SF12BW125
627 +)))
599 599  
629 +(((
600 600  507.1 - SF7BW125 to SF12BW125
631 +)))
601 601  
633 +(((
602 602  507.3 - SF7BW125 to SF12BW125
635 +)))
603 603  
637 +(((
604 604  507.5 - SF7BW125 to SF12BW125
639 +)))
605 605  
641 +(((
606 606  507.7 - SF7BW125 to SF12BW125
643 +)))
607 607  
645 +(((
608 608  507.9 - SF7BW125 to SF12BW125
647 +)))
609 609  
649 +(((
610 610  508.1 - SF7BW125 to SF12BW125
651 +)))
611 611  
653 +(((
612 612  505.3 - SF12BW125 (RX2 downlink only)
655 +)))
613 613  
614 614  
615 615  
... ... @@ -634,112 +634,219 @@
634 634  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
635 635  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
636 636  
637 -
638 -
639 639  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
640 640  
682 +(((
641 641  (% style="color:blue" %)**Default Uplink channel:**
684 +)))
642 642  
686 +(((
643 643  923.2 - SF7BW125 to SF10BW125
688 +)))
644 644  
690 +(((
645 645  923.4 - SF7BW125 to SF10BW125
692 +)))
646 646  
694 +(((
695 +
696 +)))
647 647  
698 +(((
648 648  (% style="color:blue" %)**Additional Uplink Channel**:
700 +)))
649 649  
702 +(((
650 650  (OTAA mode, channel added by JoinAccept message)
704 +)))
651 651  
706 +(((
707 +
708 +)))
652 652  
710 +(((
653 653  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
712 +)))
654 654  
714 +(((
655 655  922.2 - SF7BW125 to SF10BW125
716 +)))
656 656  
718 +(((
657 657  922.4 - SF7BW125 to SF10BW125
720 +)))
658 658  
722 +(((
659 659  922.6 - SF7BW125 to SF10BW125
724 +)))
660 660  
726 +(((
661 661  922.8 - SF7BW125 to SF10BW125
728 +)))
662 662  
730 +(((
663 663  923.0 - SF7BW125 to SF10BW125
732 +)))
664 664  
734 +(((
665 665  922.0 - SF7BW125 to SF10BW125
736 +)))
666 666  
738 +(((
739 +
740 +)))
667 667  
742 +(((
668 668  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
744 +)))
669 669  
746 +(((
670 670  923.6 - SF7BW125 to SF10BW125
748 +)))
671 671  
750 +(((
672 672  923.8 - SF7BW125 to SF10BW125
752 +)))
673 673  
754 +(((
674 674  924.0 - SF7BW125 to SF10BW125
756 +)))
675 675  
758 +(((
676 676  924.2 - SF7BW125 to SF10BW125
760 +)))
677 677  
762 +(((
678 678  924.4 - SF7BW125 to SF10BW125
764 +)))
679 679  
766 +(((
680 680  924.6 - SF7BW125 to SF10BW125
768 +)))
681 681  
770 +(((
771 +
772 +)))
682 682  
774 +(((
683 683  (% style="color:blue" %)**Downlink:**
776 +)))
684 684  
778 +(((
685 685  Uplink channels 1-8 (RX1)
780 +)))
686 686  
782 +(((
687 687  923.2 - SF10BW125 (RX2)
784 +)))
688 688  
689 689  
690 690  
691 691  === 2.8.6 KR920-923 (KR920) ===
692 692  
790 +(((
693 693  (% style="color:blue" %)**Default channel:**
792 +)))
694 694  
794 +(((
695 695  922.1 - SF7BW125 to SF12BW125
796 +)))
696 696  
798 +(((
697 697  922.3 - SF7BW125 to SF12BW125
800 +)))
698 698  
802 +(((
699 699  922.5 - SF7BW125 to SF12BW125
804 +)))
700 700  
806 +(((
807 +
808 +)))
701 701  
810 +(((
702 702  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
812 +)))
703 703  
814 +(((
704 704  922.1 - SF7BW125 to SF12BW125
816 +)))
705 705  
818 +(((
706 706  922.3 - SF7BW125 to SF12BW125
820 +)))
707 707  
822 +(((
708 708  922.5 - SF7BW125 to SF12BW125
824 +)))
709 709  
826 +(((
710 710  922.7 - SF7BW125 to SF12BW125
828 +)))
711 711  
830 +(((
712 712  922.9 - SF7BW125 to SF12BW125
832 +)))
713 713  
834 +(((
714 714  923.1 - SF7BW125 to SF12BW125
836 +)))
715 715  
838 +(((
716 716  923.3 - SF7BW125 to SF12BW125
840 +)))
717 717  
842 +(((
843 +
844 +)))
718 718  
846 +(((
719 719  (% style="color:blue" %)**Downlink:**
848 +)))
720 720  
850 +(((
721 721  Uplink channels 1-7(RX1)
852 +)))
722 722  
854 +(((
723 723  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
856 +)))
724 724  
725 725  
726 726  
727 727  === 2.8.7 IN865-867 (IN865) ===
728 728  
862 +(((
729 729  (% style="color:blue" %)**Uplink:**
864 +)))
730 730  
866 +(((
731 731  865.0625 - SF7BW125 to SF12BW125
868 +)))
732 732  
870 +(((
733 733  865.4025 - SF7BW125 to SF12BW125
872 +)))
734 734  
874 +(((
735 735  865.9850 - SF7BW125 to SF12BW125
876 +)))
736 736  
878 +(((
879 +
880 +)))
737 737  
882 +(((
738 738  (% style="color:blue" %)**Downlink:**
884 +)))
739 739  
886 +(((
740 740  Uplink channels 1-3 (RX1)
888 +)))
741 741  
890 +(((
742 742  866.550 - SF10BW125 (RX2)
892 +)))
743 743  
744 744  
745 745  
... ... @@ -750,8 +750,6 @@
750 750  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
751 751  * Blink once when device transmit a packet.
752 752  
753 -
754 -
755 755  == 2.10 ​Firmware Change Log ==
756 756  
757 757  
... ... @@ -766,26 +766,51 @@
766 766  
767 767  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
768 768  
917 +(((
769 769  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
919 +)))
770 770  
771 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
772 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
921 +* (((
922 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
923 +)))
924 +* (((
925 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
926 +)))
773 773  
928 +(((
774 774  There are two kinds of commands to configure LSPH01, they are:
930 +)))
775 775  
776 -* (% style="color:#4f81bd" %)** General Commands**.
932 +* (((
933 +(% style="color:#4f81bd" %)** General Commands**.
934 +)))
777 777  
936 +(((
778 778  These commands are to configure:
938 +)))
779 779  
780 -* General system settings like: uplink interval.
781 -* LoRaWAN protocol & radio related command.
940 +* (((
941 +General system settings like: uplink interval.
942 +)))
943 +* (((
944 +LoRaWAN protocol & radio related command.
945 +)))
782 782  
947 +(((
783 783  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
949 +)))
784 784  
951 +(((
952 +
953 +)))
785 785  
786 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
955 +* (((
956 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
957 +)))
787 787  
959 +(((
788 788  These commands only valid for LSPH01, as below:
961 +)))
789 789  
790 790  
791 791  
... ... @@ -799,18 +799,28 @@
799 799  
800 800  
801 801  
975 +(((
802 802  (% style="color:#037691" %)**Downlink Command: 0x01**
977 +)))
803 803  
979 +(((
804 804  Format: Command Code (0x01) followed by 3 bytes time value.
981 +)))
805 805  
983 +(((
806 806  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
985 +)))
807 807  
808 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
809 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
987 +* (((
988 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
989 +)))
990 +* (((
991 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
810 810  
811 811  
994 +
995 +)))
812 812  
813 -
814 814  == 3.2 Set Interrupt Mode ==
815 815  
816 816  Feature, Set Interrupt mode for GPIO_EXIT.
... ... @@ -820,19 +820,34 @@
820 820  [[image:image-20220607171716-9.png]]
821 821  
822 822  
1006 +(((
823 823  (% style="color:#037691" %)**Downlink Command: 0x06**
1008 +)))
824 824  
1010 +(((
825 825  Format: Command Code (0x06) followed by 3 bytes.
1012 +)))
826 826  
1014 +(((
827 827  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1016 +)))
828 828  
829 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
830 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1018 +* (((
1019 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1020 +)))
1021 +* (((
1022 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1023 +)))
831 831  
1025 +(((
1026 +
1027 +)))
832 832  
1029 +
1030 +
833 833  == 3.3 Calibrate Sensor ==
834 834  
835 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1033 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
836 836  
837 837  
838 838  
... ... @@ -847,7 +847,6 @@
847 847  * Reply to the confirmation package: 26 01
848 848  * Reply to non-confirmed packet: 26 00
849 849  
850 -
851 851  Device will send an uplink after got this downlink command. With below payload:
852 852  
853 853  Configures info payload:
... ... @@ -865,7 +865,7 @@
865 865  
866 866  Version
867 867  )))|Sensor Type|Reserve|(((
868 -[[Message Type>>path:#H2.3.6MessageType]]
1065 +[[Message Type>>||anchor="H2.3.6MessageType"]]
869 869  Always 0x02
870 870  )))
871 871  
... ... @@ -1005,9 +1005,13 @@
1005 1005  
1006 1006  === ​4.3.2 Replace the battery ===
1007 1007  
1205 +(((
1008 1008  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1207 +)))
1009 1009  
1209 +(((
1010 1010  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1211 +)))
1011 1011  
1012 1012  
1013 1013  
... ... @@ -1028,24 +1028,24 @@
1028 1028  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1029 1029  
1030 1030  
1232 +(((
1031 1031  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1234 +)))
1032 1032  
1033 1033  
1034 1034   [[image:1654593712276-618.png]]
1035 1035  
1036 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1239 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1037 1037  
1038 1038  
1039 -
1040 1040  = 6. FAQ =
1041 1041  
1042 1042  == 6.1 How to change the LoRa Frequency Bands/Region ==
1043 1043  
1044 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1246 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1045 1045  When downloading the images, choose the required image file for download. ​
1046 1046  
1047 1047  
1048 -
1049 1049  = 7. Trouble Shooting =
1050 1050  
1051 1051  == 7.1 AT Commands input doesn’t work ==
... ... @@ -1070,7 +1070,6 @@
1070 1070  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1071 1071  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1072 1072  
1073 -
1074 1074  = 9. ​Packing Info =
1075 1075  
1076 1076  
... ... @@ -1085,7 +1085,6 @@
1085 1085  * Package Size / pcs : cm
1086 1086  * Weight / pcs : g
1087 1087  
1088 -
1089 1089  = 10. ​Support =
1090 1090  
1091 1091  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1654826112831-311.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +257.0 KB
Content
1654826306458-414.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +109.3 KB
Content
1654827224480-952.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.2 KB
Content
image-20220610095606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +183.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0