Last modified by Xiaoling on 2025/04/24 17:18
<
From version < 73.12 >
edited by Xiaoling
on 2022/06/07 17:37
To version < 92.1 >
edited by Xiaoling
on 2022/06/10 10:15
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LSPH01-LoRaWAN Soil pH Sensor User Manual
1 +LLDS12-LoRaWAN LiDAR ToF Distance Sensor User Manual
Content
... ... @@ -1,65 +1,9 @@
1 1  (% style="text-align:center" %)
2 -[[image:1654592399090-860.png||height="521" width="483"]]
2 +[[image:image-20220610095606-1.png]]
3 3  
4 4  
5 -
6 -
7 7  **Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 65  
... ... @@ -66,79 +66,92 @@
66 66  
67 67  
68 68  
13 += 1.  Introduction =
69 69  
15 +== 1.1 ​ What is LoRaWAN LiDAR ToF Distance Sensor ==
70 70  
71 -= 1. Introduction =
17 +(((
18 +
72 72  
73 -== 1.1 ​What is LoRaWAN Soil pH Sensor ==
20 +The Dragino LLDS12 is a (% style="color:blue" %)**LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor**(%%) for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
74 74  
75 -The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
22 +The LLDS12 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
76 76  
77 -LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
24 +It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
78 78  
79 -The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
26 +The LoRa wireless technology used in LLDS12 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
80 80  
81 -LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
28 +LLDS12 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
82 82  
83 -Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
30 +Each LLDS12 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
31 +)))
84 84  
85 85  
86 -[[image:1654592435432-887.png]]
34 +[[image:1654826306458-414.png]]
87 87  
88 88  
89 89  
90 -== ​1.2 Features ==
38 +== ​1.2  Features ==
91 91  
92 92  * LoRaWAN 1.0.3 Class A
93 93  * Ultra-low power consumption
94 -* Monitor soil pH with temperature compensation.
95 -* Monitor soil temperature
42 +* Laser technology for distance detection
43 +* Operating Range - 0.1m~~12m①
44 +* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
96 96  * Monitor Battery Level
97 -* Support pH calibration by end user
98 98  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
99 99  * AT Commands to change parameters
100 100  * Uplink on periodically
101 101  * Downlink to change configure
102 -* IP66 Waterproof Enclosure
103 -* IP68 rate for the Sensor Probe
104 104  * 8500mAh Battery for long term use
105 105  
106 106  
53 +== 1.3  Probe Specification ==
107 107  
108 -== 1.3 Probe Specification ==
109 109  
56 +* Storage temperature ：-20℃~~75℃
57 +* Operating temperature - -20℃~~60℃
58 +* Operating Range - 0.1m~~12m①
59 +* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
60 +* Distance resolution - 5mm
61 +* Ambient light immunity - 70klux
62 +* Enclosure rating - IP65
63 +* Light source - LED
64 +* Central wavelength - 850nm
65 +* FOV - 3.6°
66 +* Material of enclosure - ABS+PC
67 +* Wire length - 25cm
110 110  
111 -(% style="color:#4f81bd" %)**Soil pH:**
112 112  
113 -* Range: 3 ~~ 10 pH
114 -* Resolution: 0.01 pH
115 -* Accuracy: ±2% under (0~~50 ℃, Accuracy will poor under 0 due to frozen)
116 -* Temperature Compensation Range: 0 ~~ 50℃
117 -* IP68 Protection
118 -* Length: 3.5 meters
70 +(% class="wikigeneratedid" %)
71 +== 1.4  Probe Dimension ==
119 119  
120 -(% style="color:#4f81bd" %)**Soil Temperature:**
121 121  
122 -* Range -40℃～85℃
123 -* Resolution: 0.1℃
124 -* Accuracy: <±0.5℃(-10℃～40℃)，<±0.8℃ (others)
125 -* IP68 Protection
126 -* Length: 3.5 meters
74 +[[image:1654827224480-952.png]]
127 127  
128 128  
129 129  
130 -== 1.4 ​Applications ==
78 +== 1.5 ​ Applications ==
131 131  
132 -* Smart Agriculture
133 133  
81 +* Horizontal distance measurement
82 +* Parking management system
83 +* Object proximity and presence detection
84 +* Intelligent trash can management system
85 +* Robot obstacle avoidance
86 +* Automatic control
87 +* Sewer
134 134  
135 135  
136 -== 1.5 Pin mapping and power on ==
137 137  
138 -[[image:1654592472094-134.png]]
91 +== 1.6 Pin mapping and power on ==
139 139  
140 140  
141 141  
95 +[[image:1654827332142-133.png]]
96 +
97 +
98 +
142 142  = 2. Configure LSPH01 to connect to LoRaWAN network =
143 143  
144 144  == 2.1 How it works ==
... ... @@ -148,7 +148,7 @@
148 148  )))
149 149  
150 150  (((
151 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
108 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
152 152  )))
153 153  
154 154  
... ... @@ -211,7 +211,9 @@
211 211  [[image:image-20220607170442-2.png]]
212 212  
213 213  
171 +(((
214 214  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
173 +)))
215 215  
216 216  [[image:1654592697690-910.png]]
217 217  
... ... @@ -219,26 +219,30 @@
219 219  
220 220  == 2.3 ​Uplink Payload ==
221 221  
181 +(((
222 222  LSPH01 will uplink payload via LoRaWAN with below payload format: 
183 +)))
223 223  
185 +(((
224 224  Uplink payload includes in total 11 bytes.
187 +)))
225 225  
189 +(((
226 226  Normal uplink payload:
191 +)))
227 227  
228 228  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
229 -|(((
230 -**Size**
194 +|=(% style="width: 62.5px;" %)(((
195 +**Size (bytes)**
196 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
197 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
198 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
231 231  
232 -**(bytes)**
233 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
234 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
235 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
236 -
237 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
238 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
239 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
200 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
201 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
202 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
240 240  )))|Reserve|(((
241 -[[Message Type>>path:#H2.3.6MessageType]]
204 +[[Message Type>>||anchor="H2.3.6MessageType"]]
242 242  )))
243 243  
244 244  [[image:1654592721645-318.png]]
... ... @@ -294,7 +294,7 @@
294 294  
295 295  === 2.3.5 Interrupt Pin ===
296 296  
297 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
260 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
298 298  
299 299  
300 300  **Example:**
... ... @@ -307,20 +307,21 @@
307 307  
308 308  === 2.3.6 Message Type ===
309 309  
273 +(((
310 310  For a normal uplink payload, the message type is always 0x01.
275 +)))
311 311  
277 +(((
312 312  Valid Message Type:
279 +)))
313 313  
314 314  
315 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
316 -|**Message Type Code**|**Description**|**Payload**
317 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
318 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
319 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
282 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
283 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
284 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
285 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
286 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
320 320  
321 -
322 -
323 -
324 324  === 2.3.7 Decode payload in The Things Network ===
325 325  
326 326  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -340,18 +340,27 @@
340 340  
341 341  == 2.4 Uplink Interval ==
342 342  
343 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
307 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
344 344  
345 345  
346 346  
347 347  == 2.5 ​Show Data in DataCake IoT Server ==
348 348  
313 +(((
349 349  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
315 +)))
350 350  
317 +(((
318 +
319 +)))
351 351  
321 +(((
352 352  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
323 +)))
353 353  
325 +(((
354 354  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
327 +)))
355 355  
356 356  
357 357  [[image:1654592790040-760.png]]
... ... @@ -374,9 +374,13 @@
374 374  [[image:1654592856403-259.png]]
375 375  
376 376  
350 +(((
377 377  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
352 +)))
378 378  
354 +(((
379 379  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
356 +)))
380 380  
381 381  
382 382  [[image:1654592878525-845.png]]
... ... @@ -399,8 +399,10 @@
399 399  === 2.6.1 Before measurement ===
400 400  
401 401  (((
379 +(((
402 402  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
403 403  )))
382 +)))
404 404  
405 405  
406 406  
... ... @@ -407,24 +407,45 @@
407 407  === 2.6.2 Measurement ===
408 408  
409 409  
389 +(((
410 410  (% style="color:#4f81bd" %)**Measurement the soil surface:**
391 +)))
411 411  
393 +(((
412 412  [[image:1654592946732-634.png]]
395 +)))
413 413  
397 +(((
414 414  Choose the proper measuring position. Split the surface soil according to the measured deep.
399 +)))
415 415  
401 +(((
416 416  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
403 +)))
417 417  
405 +(((
418 418  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
407 +)))
419 419  
409 +(((
420 420  Put soil over the probe after insert. And start to measure.
411 +)))
421 421  
413 +(((
414 +
415 +)))
422 422  
417 +(((
423 423  (% style="color:#4f81bd" %)**Measurement inside soil:**
419 +)))
424 424  
421 +(((
425 425  Dig a hole with diameter > 20CM.
423 +)))
426 426  
425 +(((
427 427  Insert the probe inside, method like measure the surface.
427 +)))
428 428  
429 429  
430 430  
... ... @@ -454,9 +454,13 @@
454 454  
455 455  == 2.7 Calibration ==
456 456  
457 +(((
457 457  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
459 +)))
458 458  
461 +(((
459 459  After stable, user can use below command to calibrate.
463 +)))
460 460  
461 461  [[image:image-20220607171149-4.png]]
462 462  
... ... @@ -463,12 +463,10 @@
463 463  
464 464  (% style="color:#037691" %)**Calibration Payload**
465 465  
466 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
467 -|(((
468 -**Size**
469 -
470 -**(bytes)**
471 -)))|**1**|**1**|**1**|**7**|**1**
470 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
471 +|=(% style="width: 62.5px;" %)(((
472 +**Size (bytes)**
473 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
472 472  |**Value**|(((
473 473  PH4
474 474  
... ... @@ -478,7 +478,7 @@
478 478  
479 479  Calibrate value
480 480  )))|Reserve|(((
481 -[[Message Type>>path:#H2.3.6MessageType]]
483 +[[Message Type>>||anchor="H2.3.6MessageType"]]
482 482  
483 483  Always 0x03
484 484  )))
... ... @@ -491,9 +491,6 @@
491 491  * Reply to the confirmation package: 14 01
492 492  * Reply to non-confirmed packet: 14 00
493 493  
494 -
495 -
496 -
497 497  == 2.8 Frequency Plans ==
498 498  
499 499  (((
... ... @@ -503,32 +503,61 @@
503 503  
504 504  === 2.8.1 EU863-870 (EU868) ===
505 505  
505 +(((
506 506  (% style="color:blue" %)**Uplink:**
507 +)))
507 507  
509 +(((
508 508  868.1 - SF7BW125 to SF12BW125
511 +)))
509 509  
513 +(((
510 510  868.3 - SF7BW125 to SF12BW125 and SF7BW250
515 +)))
511 511  
517 +(((
512 512  868.5 - SF7BW125 to SF12BW125
519 +)))
513 513  
521 +(((
514 514  867.1 - SF7BW125 to SF12BW125
523 +)))
515 515  
525 +(((
516 516  867.3 - SF7BW125 to SF12BW125
527 +)))
517 517  
529 +(((
518 518  867.5 - SF7BW125 to SF12BW125
531 +)))
519 519  
533 +(((
520 520  867.7 - SF7BW125 to SF12BW125
535 +)))
521 521  
537 +(((
522 522  867.9 - SF7BW125 to SF12BW125
539 +)))
523 523  
541 +(((
524 524  868.8 - FSK
543 +)))
525 525  
545 +(((
546 +
547 +)))
526 526  
549 +(((
527 527  (% style="color:blue" %)**Downlink:**
551 +)))
528 528  
553 +(((
529 529  Uplink channels 1-9 (RX1)
555 +)))
530 530  
557 +(((
531 531  869.525 - SF9BW125 (RX2 downlink only)
559 +)))
532 532  
533 533  
534 534  
... ... @@ -549,49 +549,91 @@
549 549  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
550 550  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
551 551  
552 -
553 553  === 2.8.3 CN470-510 (CN470) ===
554 554  
582 +(((
555 555  Used in China, Default use CHE=1
584 +)))
556 556  
586 +(((
557 557  (% style="color:blue" %)**Uplink:**
588 +)))
558 558  
590 +(((
559 559  486.3 - SF7BW125 to SF12BW125
592 +)))
560 560  
594 +(((
561 561  486.5 - SF7BW125 to SF12BW125
596 +)))
562 562  
598 +(((
563 563  486.7 - SF7BW125 to SF12BW125
600 +)))
564 564  
602 +(((
565 565  486.9 - SF7BW125 to SF12BW125
604 +)))
566 566  
606 +(((
567 567  487.1 - SF7BW125 to SF12BW125
608 +)))
568 568  
610 +(((
569 569  487.3 - SF7BW125 to SF12BW125
612 +)))
570 570  
614 +(((
571 571  487.5 - SF7BW125 to SF12BW125
616 +)))
572 572  
618 +(((
573 573  487.7 - SF7BW125 to SF12BW125
620 +)))
574 574  
622 +(((
623 +
624 +)))
575 575  
626 +(((
576 576  (% style="color:blue" %)**Downlink:**
628 +)))
577 577  
630 +(((
578 578  506.7 - SF7BW125 to SF12BW125
632 +)))
579 579  
634 +(((
580 580  506.9 - SF7BW125 to SF12BW125
636 +)))
581 581  
638 +(((
582 582  507.1 - SF7BW125 to SF12BW125
640 +)))
583 583  
642 +(((
584 584  507.3 - SF7BW125 to SF12BW125
644 +)))
585 585  
646 +(((
586 586  507.5 - SF7BW125 to SF12BW125
648 +)))
587 587  
650 +(((
588 588  507.7 - SF7BW125 to SF12BW125
652 +)))
589 589  
654 +(((
590 590  507.9 - SF7BW125 to SF12BW125
656 +)))
591 591  
658 +(((
592 592  508.1 - SF7BW125 to SF12BW125
660 +)))
593 593  
662 +(((
594 594  505.3 - SF12BW125 (RX2 downlink only)
664 +)))
595 595  
596 596  
597 597  
... ... @@ -616,112 +616,219 @@
616 616  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
617 617  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
618 618  
619 -
620 -
621 621  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
622 622  
691 +(((
623 623  (% style="color:blue" %)**Default Uplink channel:**
693 +)))
624 624  
695 +(((
625 625  923.2 - SF7BW125 to SF10BW125
697 +)))
626 626  
699 +(((
627 627  923.4 - SF7BW125 to SF10BW125
701 +)))
628 628  
703 +(((
704 +
705 +)))
629 629  
707 +(((
630 630  (% style="color:blue" %)**Additional Uplink Channel**:
709 +)))
631 631  
711 +(((
632 632  (OTAA mode, channel added by JoinAccept message)
713 +)))
633 633  
715 +(((
716 +
717 +)))
634 634  
719 +(((
635 635  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
721 +)))
636 636  
723 +(((
637 637  922.2 - SF7BW125 to SF10BW125
725 +)))
638 638  
727 +(((
639 639  922.4 - SF7BW125 to SF10BW125
729 +)))
640 640  
731 +(((
641 641  922.6 - SF7BW125 to SF10BW125
733 +)))
642 642  
735 +(((
643 643  922.8 - SF7BW125 to SF10BW125
737 +)))
644 644  
739 +(((
645 645  923.0 - SF7BW125 to SF10BW125
741 +)))
646 646  
743 +(((
647 647  922.0 - SF7BW125 to SF10BW125
745 +)))
648 648  
747 +(((
748 +
749 +)))
649 649  
751 +(((
650 650  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
753 +)))
651 651  
755 +(((
652 652  923.6 - SF7BW125 to SF10BW125
757 +)))
653 653  
759 +(((
654 654  923.8 - SF7BW125 to SF10BW125
761 +)))
655 655  
763 +(((
656 656  924.0 - SF7BW125 to SF10BW125
765 +)))
657 657  
767 +(((
658 658  924.2 - SF7BW125 to SF10BW125
769 +)))
659 659  
771 +(((
660 660  924.4 - SF7BW125 to SF10BW125
773 +)))
661 661  
775 +(((
662 662  924.6 - SF7BW125 to SF10BW125
777 +)))
663 663  
779 +(((
780 +
781 +)))
664 664  
783 +(((
665 665  (% style="color:blue" %)**Downlink:**
785 +)))
666 666  
787 +(((
667 667  Uplink channels 1-8 (RX1)
789 +)))
668 668  
791 +(((
669 669  923.2 - SF10BW125 (RX2)
793 +)))
670 670  
671 671  
672 672  
673 673  === 2.8.6 KR920-923 (KR920) ===
674 674  
799 +(((
675 675  (% style="color:blue" %)**Default channel:**
801 +)))
676 676  
803 +(((
677 677  922.1 - SF7BW125 to SF12BW125
805 +)))
678 678  
807 +(((
679 679  922.3 - SF7BW125 to SF12BW125
809 +)))
680 680  
811 +(((
681 681  922.5 - SF7BW125 to SF12BW125
813 +)))
682 682  
815 +(((
816 +
817 +)))
683 683  
819 +(((
684 684  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
821 +)))
685 685  
823 +(((
686 686  922.1 - SF7BW125 to SF12BW125
825 +)))
687 687  
827 +(((
688 688  922.3 - SF7BW125 to SF12BW125
829 +)))
689 689  
831 +(((
690 690  922.5 - SF7BW125 to SF12BW125
833 +)))
691 691  
835 +(((
692 692  922.7 - SF7BW125 to SF12BW125
837 +)))
693 693  
839 +(((
694 694  922.9 - SF7BW125 to SF12BW125
841 +)))
695 695  
843 +(((
696 696  923.1 - SF7BW125 to SF12BW125
845 +)))
697 697  
847 +(((
698 698  923.3 - SF7BW125 to SF12BW125
849 +)))
699 699  
851 +(((
852 +
853 +)))
700 700  
855 +(((
701 701  (% style="color:blue" %)**Downlink:**
857 +)))
702 702  
859 +(((
703 703  Uplink channels 1-7(RX1)
861 +)))
704 704  
863 +(((
705 705  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
865 +)))
706 706  
707 707  
708 708  
709 709  === 2.8.7 IN865-867 (IN865) ===
710 710  
871 +(((
711 711  (% style="color:blue" %)**Uplink:**
873 +)))
712 712  
875 +(((
713 713  865.0625 - SF7BW125 to SF12BW125
877 +)))
714 714  
879 +(((
715 715  865.4025 - SF7BW125 to SF12BW125
881 +)))
716 716  
883 +(((
717 717  865.9850 - SF7BW125 to SF12BW125
885 +)))
718 718  
887 +(((
888 +
889 +)))
719 719  
891 +(((
720 720  (% style="color:blue" %)**Downlink:**
893 +)))
721 721  
895 +(((
722 722  Uplink channels 1-3 (RX1)
897 +)))
723 723  
899 +(((
724 724  866.550 - SF10BW125 (RX2)
901 +)))
725 725  
726 726  
727 727  
... ... @@ -732,8 +732,6 @@
732 732  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
733 733  * Blink once when device transmit a packet.
734 734  
735 -
736 -
737 737  == 2.10 ​Firmware Change Log ==
738 738  
739 739  
... ... @@ -748,26 +748,51 @@
748 748  
749 749  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
750 750  
926 +(((
751 751  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
928 +)))
752 752  
753 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
754 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
930 +* (((
931 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
932 +)))
933 +* (((
934 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
935 +)))
755 755  
937 +(((
756 756  There are two kinds of commands to configure LSPH01, they are:
939 +)))
757 757  
758 -* (% style="color:#4f81bd" %)** General Commands**.
941 +* (((
942 +(% style="color:#4f81bd" %)** General Commands**.
943 +)))
759 759  
945 +(((
760 760  These commands are to configure:
947 +)))
761 761  
762 -* General system settings like: uplink interval.
763 -* LoRaWAN protocol & radio related command.
949 +* (((
950 +General system settings like: uplink interval.
951 +)))
952 +* (((
953 +LoRaWAN protocol & radio related command.
954 +)))
764 764  
956 +(((
765 765  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
958 +)))
766 766  
960 +(((
961 +
962 +)))
767 767  
768 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
964 +* (((
965 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
966 +)))
769 769  
968 +(((
770 770  These commands only valid for LSPH01, as below:
970 +)))
771 771  
772 772  
773 773  
... ... @@ -781,18 +781,28 @@
781 781  
782 782  
783 783  
984 +(((
784 784  (% style="color:#037691" %)**Downlink Command: 0x01**
986 +)))
785 785  
988 +(((
786 786  Format: Command Code (0x01) followed by 3 bytes time value.
990 +)))
787 787  
992 +(((
788 788  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
994 +)))
789 789  
790 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
791 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
996 +* (((
997 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
998 +)))
999 +* (((
1000 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
792 792  
793 793  
1003 +
1004 +)))
794 794  
795 -
796 796  == 3.2 Set Interrupt Mode ==
797 797  
798 798  Feature, Set Interrupt mode for GPIO_EXIT.
... ... @@ -802,19 +802,34 @@
802 802  [[image:image-20220607171716-9.png]]
803 803  
804 804  
1015 +(((
805 805  (% style="color:#037691" %)**Downlink Command: 0x06**
1017 +)))
806 806  
1019 +(((
807 807  Format: Command Code (0x06) followed by 3 bytes.
1021 +)))
808 808  
1023 +(((
809 809  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1025 +)))
810 810  
811 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
812 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1027 +* (((
1028 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1029 +)))
1030 +* (((
1031 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1032 +)))
813 813  
1034 +(((
1035 +
1036 +)))
814 814  
1038 +
1039 +
815 815  == 3.3 Calibrate Sensor ==
816 816  
817 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1042 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
818 818  
819 819  
820 820  
... ... @@ -829,7 +829,6 @@
829 829  * Reply to the confirmation package: 26 01
830 830  * Reply to non-confirmed packet: 26 00
831 831  
832 -
833 833  Device will send an uplink after got this downlink command. With below payload:
834 834  
835 835  Configures info payload:
... ... @@ -847,7 +847,7 @@
847 847  
848 848  Version
849 849  )))|Sensor Type|Reserve|(((
850 -[[Message Type>>path:#H2.3.6MessageType]]
1074 +[[Message Type>>||anchor="H2.3.6MessageType"]]
851 851  Always 0x02
852 852  )))
853 853  
... ... @@ -987,9 +987,13 @@
987 987  
988 988  === ​4.3.2 Replace the battery ===
989 989  
1214 +(((
990 990  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1216 +)))
991 991  
1218 +(((
992 992  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1220 +)))
993 993  
994 994  
995 995  
... ... @@ -1010,24 +1010,24 @@
1010 1010  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1011 1011  
1012 1012  
1241 +(((
1013 1013  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1243 +)))
1014 1014  
1015 1015  
1016 1016   [[image:1654593712276-618.png]]
1017 1017  
1018 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1248 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1019 1019  
1020 1020  
1021 -
1022 1022  = 6. FAQ =
1023 1023  
1024 1024  == 6.1 How to change the LoRa Frequency Bands/Region ==
1025 1025  
1026 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1255 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1027 1027  When downloading the images, choose the required image file for download. ​
1028 1028  
1029 1029  
1030 -
1031 1031  = 7. Trouble Shooting =
1032 1032  
1033 1033  == 7.1 AT Commands input doesn’t work ==
... ... @@ -1052,7 +1052,6 @@
1052 1052  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1053 1053  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1054 1054  
1055 -
1056 1056  = 9. ​Packing Info =
1057 1057  
1058 1058  
... ... @@ -1067,7 +1067,6 @@
1067 1067  * Package Size / pcs : cm
1068 1068  * Weight / pcs : g
1069 1069  
1070 -
1071 1071  = 10. ​Support =
1072 1072  
1073 1073  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1654826112831-311.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +257.0 KB
Content
1654826306458-414.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +109.3 KB
Content
1654827224480-952.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.2 KB
Content
1654827332142-133.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +492.6 KB
Content
image-20220610095606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +183.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0