Summary

• Page properties (2 modified, 0 added, 0 removed)
• Attachments (0 modified, 3 added, 0 removed)
  • 1654826112831-311.png
  • 1654826306458-414.png
  • image-20220610095606-1.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-LSPH01-LoRaWAN Soil pH Sensor User Manual
	1	+LLDS12-LoRaWAN LiDAR ToF Distance Sensor User Manual

Content

...	...	@@ -1,65 +1,9 @@
1	1	(% style="text-align:center" %)
2		-[[image:1654592399090-860.png||height="521" width="483"]]
	2	+[[image:image-20220610095606-1.png]]
3	3
4	4
5		-
6		-
7	7	**Contents:**
8	8
9		-* [[1. Introduction>>path:#H1.Introduction]]
10		-** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11		-** [[​1.2 Features>>path:#H200B1.2Features]]
12		-** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13		-** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14		-** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15		-* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16		-** [[2.1 How it works>>path:#H2.1Howitworks]]
17		-** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18		-** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19		-*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20		-*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21		-*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22		-*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23		-*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24		-*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25		-*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26		-** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27		-** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28		-** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29		-*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30		-*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31		-*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32		-** [[2.7 Calibration>>path:#H2.7Calibration]]
33		-** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34		-*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35		-*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36		-*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37		-*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38		-*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39		-*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40		-*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41		-** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42		-** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43		-* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44		-** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45		-** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46		-** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47		-** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48		-* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49		-** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50		-** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51		-** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52		-*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53		-*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54		-* [[5. Use AT Command>>path:#H5.UseATCommand]]
55		-** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56		-* [[6. FAQ>>path:#H6.FAQ]]
57		-** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58		-* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59		-** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60		-* [[8. Order Info>>path:#H8.OrderInfo]]
61		-* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62		-* [[10. ​Support>>path:#H10.A0200BSupport]]
63	63
64	64
65	65
...	...	@@ -66,24 +66,28 @@
66	66
67	67
68	68
	13	+= 1. Introduction =
69	69
	15	+== 1.1 ​What is LoRaWAN LiDAR ToF Distance Sensor ==
70	70
71		-= 1. Introduction =
	17	+(((
	18	+
72	72
73		-== 1.1 ​What is LoRaWAN Soil pH Sensor ==
	20	+The Dragino LLDS12 is a (% style="color:blue" %)**LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor**(%%) for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
74	74
75		-The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
	22	+The LLDS12 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
76	76
77		-LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
	24	+It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
78	78
79		-The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
	26	+The LoRa wireless technology used in LLDS12 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
80	80
81		-LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
	28	+LLDS12 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
82	82
83		-Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	30	+Each LLDS12 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	31	+)))
84	84
85	85
86		-[[image:1654592435432-887.png]]
	34	+[[image:1654826306458-414.png]]
87	87
88	88
89	89
...	...	@@ -91,16 +91,14 @@
91	91
92	92	* LoRaWAN 1.0.3 Class A
93	93	* Ultra-low power consumption
94		-* Monitor soil pH with temperature compensation.
95		-* Monitor soil temperature
	42	+* Laser technology for distance detection
	43	+* Operating Range - 0.1m~~12m①
	44	+* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
96	96	* Monitor Battery Level
97		-* Support pH calibration by end user
98	98	* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
99	99	* AT Commands to change parameters
100	100	* Uplink on periodically
101	101	* Downlink to change configure
102		-* IP66 Waterproof Enclosure
103		-* IP68 rate for the Sensor Probe
104	104	* 8500mAh Battery for long term use
105	105
106	106
...	...	@@ -108,25 +108,21 @@
108	108	== 1.3 Probe Specification ==
109	109
110	110
111		-(% style="color:#4f81bd" %)**Soil pH:**
	57	+* Storage temperature ：-20℃~~75℃
	58	+* Operating temperature - -20℃~~60℃
	59	+* Operating Range - 0.1m~~12m①
	60	+* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
	61	+* Distance resolution - 5mm
	62	+* Ambient light immunity - 70klux
	63	+* Enclosure rating - IP65
	64	+* Light source - LED
	65	+* Central wavelength - 850nm
	66	+* FOV - 3.6°
	67	+* Material of enclosure - ABS+PC
	68	+* Wire length - 25cm
112	112
113		-* Range: 3 ~~ 10 pH
114		-* Resolution: 0.01 pH
115		-* Accuracy: ±2% under (0~~50 ℃, Accuracy will poor under 0 due to frozen)
116		-* Temperature Compensation Range: 0 ~~ 50℃
117		-* IP68 Protection
118		-* Length: 3.5 meters
119	119
120		-(% style="color:#4f81bd" %)**Soil Temperature:**
121	121
122		-* Range -40℃～85℃
123		-* Resolution: 0.1℃
124		-* Accuracy: <±0.5℃(-10℃～40℃)，<±0.8℃ (others)
125		-* IP68 Protection
126		-* Length: 3.5 meters
127		-
128		-
129		-
130	130	== 1.4 ​Applications ==
131	131
132	132	* Smart Agriculture
...	...	@@ -148,7 +148,7 @@
148	148	)))
149	149
150	150	(((
151		-In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
	93	+In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
152	152	)))
153	153
154	154
...	...	@@ -211,7 +211,9 @@
211	211	[[image:image-20220607170442-2.png]]
212	212
213	213
	156	+(((
214	214	(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	158	+)))
215	215
216	216	[[image:1654592697690-910.png]]
217	217
...	...	@@ -219,26 +219,30 @@
219	219
220	220	== 2.3 ​Uplink Payload ==
221	221
	166	+(((
222	222	LSPH01 will uplink payload via LoRaWAN with below payload format:
	168	+)))
223	223
	170	+(((
224	224	Uplink payload includes in total 11 bytes.
	172	+)))
225	225
	174	+(((
226	226	Normal uplink payload:
	176	+)))
227	227
228	228	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
229		-|(((
230		-**Size**
	179	+|=(% style="width: 62.5px;" %)(((
	180	+**Size (bytes)**
	181	+)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
	182	+|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
	183	+[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
231	231
232		-**(bytes)**
233		-)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
234		-|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
235		-[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
236		-
237		-[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
238		-)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
239		-[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
	185	+[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
	186	+)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
	187	+[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
240	240	)))|Reserve|(((
241		-[[Message Type>>path:#H2.3.6MessageType]]
	189	+[[Message Type>>||anchor="H2.3.6MessageType"]]
242	242	)))
243	243
244	244	[[image:1654592721645-318.png]]
...	...	@@ -294,7 +294,7 @@
294	294
295	295	=== 2.3.5 Interrupt Pin ===
296	296
297		-This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
	245	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
298	298
299	299
300	300	**Example:**
...	...	@@ -307,20 +307,21 @@
307	307
308	308	=== 2.3.6 Message Type ===
309	309
	258	+(((
310	310	For a normal uplink payload, the message type is always 0x01.
	260	+)))
311	311
	262	+(((
312	312	Valid Message Type:
	264	+)))
313	313
314	314
315		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
316		-|**Message Type Code**|**Description**|**Payload**
317		-|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
318		-|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
319		-|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
	267	+(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
	268	+|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
	269	+|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
	270	+|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
	271	+|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
320	320
321		-
322		-
323		-
324	324	=== 2.3.7 Decode payload in The Things Network ===
325	325
326	326	While using TTN network, you can add the payload format to decode the payload.
...	...	@@ -340,18 +340,27 @@
340	340
341	341	== 2.4 Uplink Interval ==
342	342
343		-The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
	292	+The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
344	344
345	345
346	346
347	347	== 2.5 ​Show Data in DataCake IoT Server ==
348	348
	298	+(((
349	349	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
	300	+)))
350	350
	302	+(((
	303	+
	304	+)))
351	351
	306	+(((
352	352	(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
	308	+)))
353	353
	310	+(((
354	354	(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
	312	+)))
355	355
356	356
357	357	[[image:1654592790040-760.png]]
...	...	@@ -374,9 +374,13 @@
374	374	[[image:1654592856403-259.png]]
375	375
376	376
	335	+(((
377	377	(% style="color:blue" %)**Step 5**(%%)**: add payload decode**
	337	+)))
378	378
	339	+(((
379	379	Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
	341	+)))
380	380
381	381
382	382	[[image:1654592878525-845.png]]
...	...	@@ -399,8 +399,10 @@
399	399	=== 2.6.1 Before measurement ===
400	400
401	401	(((
	364	+(((
402	402	If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.
403	403	)))
	367	+)))
404	404
405	405
406	406
...	...	@@ -407,24 +407,45 @@
407	407	=== 2.6.2 Measurement ===
408	408
409	409
	374	+(((
410	410	(% style="color:#4f81bd" %)**Measurement the soil surface:**
	376	+)))
411	411
	378	+(((
412	412	[[image:1654592946732-634.png]]
	380	+)))
413	413
	382	+(((
414	414	Choose the proper measuring position. Split the surface soil according to the measured deep.
	384	+)))
415	415
	386	+(((
416	416	Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
	388	+)))
417	417
	390	+(((
418	418	Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
	392	+)))
419	419
	394	+(((
420	420	Put soil over the probe after insert. And start to measure.
	396	+)))
421	421
	398	+(((
	399	+
	400	+)))
422	422
	402	+(((
423	423	(% style="color:#4f81bd" %)**Measurement inside soil:**
	404	+)))
424	424
	406	+(((
425	425	Dig a hole with diameter > 20CM.
	408	+)))
426	426
	410	+(((
427	427	Insert the probe inside, method like measure the surface.
	412	+)))
428	428
429	429
430	430
...	...	@@ -454,9 +454,13 @@
454	454
455	455	== 2.7 Calibration ==
456	456
	442	+(((
457	457	User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
	444	+)))
458	458
	446	+(((
459	459	After stable, user can use below command to calibrate.
	448	+)))
460	460
461	461	[[image:image-20220607171149-4.png]]
462	462
...	...	@@ -463,12 +463,10 @@
463	463
464	464	(% style="color:#037691" %)**Calibration Payload**
465	465
466		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
467		-|(((
468		-**Size**
469		-
470		-**(bytes)**
471		-)))|**1**|**1**|**1**|**7**|**1**
	455	+(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
	456	+|=(% style="width: 62.5px;" %)(((
	457	+**Size (bytes)**
	458	+)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
472	472	|**Value**|(((
473	473	PH4
474	474
...	...	@@ -478,7 +478,7 @@
478	478
479	479	Calibrate value
480	480	)))|Reserve|(((
481		-[[Message Type>>path:#H2.3.6MessageType]]
	468	+[[Message Type>>||anchor="H2.3.6MessageType"]]
482	482
483	483	Always 0x03
484	484	)))
...	...	@@ -491,9 +491,6 @@
491	491	* Reply to the confirmation package: 14 01
492	492	* Reply to non-confirmed packet: 14 00
493	493
494		-
495		-
496		-
497	497	== 2.8 Frequency Plans ==
498	498
499	499	(((
...	...	@@ -503,32 +503,61 @@
503	503
504	504	=== 2.8.1 EU863-870 (EU868) ===
505	505
	490	+(((
506	506	(% style="color:blue" %)**Uplink:**
	492	+)))
507	507
	494	+(((
508	508	868.1 - SF7BW125 to SF12BW125
	496	+)))
509	509
	498	+(((
510	510	868.3 - SF7BW125 to SF12BW125 and SF7BW250
	500	+)))
511	511
	502	+(((
512	512	868.5 - SF7BW125 to SF12BW125
	504	+)))
513	513
	506	+(((
514	514	867.1 - SF7BW125 to SF12BW125
	508	+)))
515	515
	510	+(((
516	516	867.3 - SF7BW125 to SF12BW125
	512	+)))
517	517
	514	+(((
518	518	867.5 - SF7BW125 to SF12BW125
	516	+)))
519	519
	518	+(((
520	520	867.7 - SF7BW125 to SF12BW125
	520	+)))
521	521
	522	+(((
522	522	867.9 - SF7BW125 to SF12BW125
	524	+)))
523	523
	526	+(((
524	524	868.8 - FSK
	528	+)))
525	525
	530	+(((
	531	+
	532	+)))
526	526
	534	+(((
527	527	(% style="color:blue" %)**Downlink:**
	536	+)))
528	528
	538	+(((
529	529	Uplink channels 1-9 (RX1)
	540	+)))
530	530
	542	+(((
531	531	869.525 - SF9BW125 (RX2 downlink only)
	544	+)))
532	532
533	533
534	534
...	...	@@ -549,49 +549,91 @@
549	549	* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
550	550	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
551	551
552		-
553	553	=== 2.8.3 CN470-510 (CN470) ===
554	554
	567	+(((
555	555	Used in China, Default use CHE=1
	569	+)))
556	556
	571	+(((
557	557	(% style="color:blue" %)**Uplink:**
	573	+)))
558	558
	575	+(((
559	559	486.3 - SF7BW125 to SF12BW125
	577	+)))
560	560
	579	+(((
561	561	486.5 - SF7BW125 to SF12BW125
	581	+)))
562	562
	583	+(((
563	563	486.7 - SF7BW125 to SF12BW125
	585	+)))
564	564
	587	+(((
565	565	486.9 - SF7BW125 to SF12BW125
	589	+)))
566	566
	591	+(((
567	567	487.1 - SF7BW125 to SF12BW125
	593	+)))
568	568
	595	+(((
569	569	487.3 - SF7BW125 to SF12BW125
	597	+)))
570	570
	599	+(((
571	571	487.5 - SF7BW125 to SF12BW125
	601	+)))
572	572
	603	+(((
573	573	487.7 - SF7BW125 to SF12BW125
	605	+)))
574	574
	607	+(((
	608	+
	609	+)))
575	575
	611	+(((
576	576	(% style="color:blue" %)**Downlink:**
	613	+)))
577	577
	615	+(((
578	578	506.7 - SF7BW125 to SF12BW125
	617	+)))
579	579
	619	+(((
580	580	506.9 - SF7BW125 to SF12BW125
	621	+)))
581	581
	623	+(((
582	582	507.1 - SF7BW125 to SF12BW125
	625	+)))
583	583
	627	+(((
584	584	507.3 - SF7BW125 to SF12BW125
	629	+)))
585	585
	631	+(((
586	586	507.5 - SF7BW125 to SF12BW125
	633	+)))
587	587
	635	+(((
588	588	507.7 - SF7BW125 to SF12BW125
	637	+)))
589	589
	639	+(((
590	590	507.9 - SF7BW125 to SF12BW125
	641	+)))
591	591
	643	+(((
592	592	508.1 - SF7BW125 to SF12BW125
	645	+)))
593	593
	647	+(((
594	594	505.3 - SF12BW125 (RX2 downlink only)
	649	+)))
595	595
596	596
597	597
...	...	@@ -616,112 +616,219 @@
616	616	* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
617	617	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
618	618
619		-
620		-
621	621	=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
622	622
	676	+(((
623	623	(% style="color:blue" %)**Default Uplink channel:**
	678	+)))
624	624
	680	+(((
625	625	923.2 - SF7BW125 to SF10BW125
	682	+)))
626	626
	684	+(((
627	627	923.4 - SF7BW125 to SF10BW125
	686	+)))
628	628
	688	+(((
	689	+
	690	+)))
629	629
	692	+(((
630	630	(% style="color:blue" %)**Additional Uplink Channel**:
	694	+)))
631	631
	696	+(((
632	632	(OTAA mode, channel added by JoinAccept message)
	698	+)))
633	633
	700	+(((
	701	+
	702	+)))
634	634
	704	+(((
635	635	(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
	706	+)))
636	636
	708	+(((
637	637	922.2 - SF7BW125 to SF10BW125
	710	+)))
638	638
	712	+(((
639	639	922.4 - SF7BW125 to SF10BW125
	714	+)))
640	640
	716	+(((
641	641	922.6 - SF7BW125 to SF10BW125
	718	+)))
642	642
	720	+(((
643	643	922.8 - SF7BW125 to SF10BW125
	722	+)))
644	644
	724	+(((
645	645	923.0 - SF7BW125 to SF10BW125
	726	+)))
646	646
	728	+(((
647	647	922.0 - SF7BW125 to SF10BW125
	730	+)))
648	648
	732	+(((
	733	+
	734	+)))
649	649
	736	+(((
650	650	(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
	738	+)))
651	651
	740	+(((
652	652	923.6 - SF7BW125 to SF10BW125
	742	+)))
653	653
	744	+(((
654	654	923.8 - SF7BW125 to SF10BW125
	746	+)))
655	655
	748	+(((
656	656	924.0 - SF7BW125 to SF10BW125
	750	+)))
657	657
	752	+(((
658	658	924.2 - SF7BW125 to SF10BW125
	754	+)))
659	659
	756	+(((
660	660	924.4 - SF7BW125 to SF10BW125
	758	+)))
661	661
	760	+(((
662	662	924.6 - SF7BW125 to SF10BW125
	762	+)))
663	663
	764	+(((
	765	+
	766	+)))
664	664
	768	+(((
665	665	(% style="color:blue" %)**Downlink:**
	770	+)))
666	666
	772	+(((
667	667	Uplink channels 1-8 (RX1)
	774	+)))
668	668
	776	+(((
669	669	923.2 - SF10BW125 (RX2)
	778	+)))
670	670
671	671
672	672
673	673	=== 2.8.6 KR920-923 (KR920) ===
674	674
	784	+(((
675	675	(% style="color:blue" %)**Default channel:**
	786	+)))
676	676
	788	+(((
677	677	922.1 - SF7BW125 to SF12BW125
	790	+)))
678	678
	792	+(((
679	679	922.3 - SF7BW125 to SF12BW125
	794	+)))
680	680
	796	+(((
681	681	922.5 - SF7BW125 to SF12BW125
	798	+)))
682	682
	800	+(((
	801	+
	802	+)))
683	683
	804	+(((
684	684	(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
	806	+)))
685	685
	808	+(((
686	686	922.1 - SF7BW125 to SF12BW125
	810	+)))
687	687
	812	+(((
688	688	922.3 - SF7BW125 to SF12BW125
	814	+)))
689	689
	816	+(((
690	690	922.5 - SF7BW125 to SF12BW125
	818	+)))
691	691
	820	+(((
692	692	922.7 - SF7BW125 to SF12BW125
	822	+)))
693	693
	824	+(((
694	694	922.9 - SF7BW125 to SF12BW125
	826	+)))
695	695
	828	+(((
696	696	923.1 - SF7BW125 to SF12BW125
	830	+)))
697	697
	832	+(((
698	698	923.3 - SF7BW125 to SF12BW125
	834	+)))
699	699
	836	+(((
	837	+
	838	+)))
700	700
	840	+(((
701	701	(% style="color:blue" %)**Downlink:**
	842	+)))
702	702
	844	+(((
703	703	Uplink channels 1-7(RX1)
	846	+)))
704	704
	848	+(((
705	705	921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
	850	+)))
706	706
707	707
708	708
709	709	=== 2.8.7 IN865-867 (IN865) ===
710	710
	856	+(((
711	711	(% style="color:blue" %)**Uplink:**
	858	+)))
712	712
	860	+(((
713	713	865.0625 - SF7BW125 to SF12BW125
	862	+)))
714	714
	864	+(((
715	715	865.4025 - SF7BW125 to SF12BW125
	866	+)))
716	716
	868	+(((
717	717	865.9850 - SF7BW125 to SF12BW125
	870	+)))
718	718
	872	+(((
	873	+
	874	+)))
719	719
	876	+(((
720	720	(% style="color:blue" %)**Downlink:**
	878	+)))
721	721
	880	+(((
722	722	Uplink channels 1-3 (RX1)
	882	+)))
723	723
	884	+(((
724	724	866.550 - SF10BW125 (RX2)
	886	+)))
725	725
726	726
727	727
...	...	@@ -732,7 +732,6 @@
732	732	* The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
733	733	* Blink once when device transmit a packet.
734	734
735		-
736	736	== 2.10 ​Firmware Change Log ==
737	737
738	738
...	...	@@ -747,26 +747,51 @@
747	747
748	748	= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
749	749
	911	+(((
750	750	Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
	913	+)))
751	751
752		-* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
753		-* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	915	+* (((
	916	+AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
	917	+)))
	918	+* (((
	919	+LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	920	+)))
754	754
	922	+(((
755	755	There are two kinds of commands to configure LSPH01, they are:
	924	+)))
756	756
757		-* (% style="color:#4f81bd" %)** General Commands**.
	926	+* (((
	927	+(% style="color:#4f81bd" %)** General Commands**.
	928	+)))
758	758
	930	+(((
759	759	These commands are to configure:
	932	+)))
760	760
761		-* General system settings like: uplink interval.
762		-* LoRaWAN protocol & radio related command.
	934	+* (((
	935	+General system settings like: uplink interval.
	936	+)))
	937	+* (((
	938	+LoRaWAN protocol & radio related command.
	939	+)))
763	763
	941	+(((
764	764	They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	943	+)))
765	765
	945	+(((
	946	+
	947	+)))
766	766
767		-* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
	949	+* (((
	950	+(% style="color:#4f81bd" %)** Commands special design for LSPH01**
	951	+)))
768	768
	953	+(((
769	769	These commands only valid for LSPH01, as below:
	955	+)))
770	770
771	771
772	772
...	...	@@ -780,18 +780,28 @@
780	780
781	781
782	782
	969	+(((
783	783	(% style="color:#037691" %)**Downlink Command: 0x01**
	971	+)))
784	784
	973	+(((
785	785	Format: Command Code (0x01) followed by 3 bytes time value.
	975	+)))
786	786
	977	+(((
787	787	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	979	+)))
788	788
789		-* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
790		-* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	981	+* (((
	982	+Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	983	+)))
	984	+* (((
	985	+Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
791	791
792	792
	988	+
	989	+)))
793	793
794		-
795	795	== 3.2 Set Interrupt Mode ==
796	796
797	797	Feature, Set Interrupt mode for GPIO_EXIT.
...	...	@@ -801,19 +801,34 @@
801	801	[[image:image-20220607171716-9.png]]
802	802
803	803
	1000	+(((
804	804	(% style="color:#037691" %)**Downlink Command: 0x06**
	1002	+)))
805	805
	1004	+(((
806	806	Format: Command Code (0x06) followed by 3 bytes.
	1006	+)))
807	807
	1008	+(((
808	808	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
	1010	+)))
809	809
810		-* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
811		-* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1012	+* (((
	1013	+Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
	1014	+)))
	1015	+* (((
	1016	+Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1017	+)))
812	812
	1019	+(((
	1020	+
	1021	+)))
813	813
	1023	+
	1024	+
814	814	== 3.3 Calibrate Sensor ==
815	815
816		-Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
	1027	+Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
817	817
818	818
819	819
...	...	@@ -828,7 +828,6 @@
828	828	* Reply to the confirmation package: 26 01
829	829	* Reply to non-confirmed packet: 26 00
830	830
831		-
832	832	Device will send an uplink after got this downlink command. With below payload:
833	833
834	834	Configures info payload:
...	...	@@ -846,7 +846,7 @@
846	846
847	847	Version
848	848	)))|Sensor Type|Reserve|(((
849		-[[Message Type>>path:#H2.3.6MessageType]]
	1059	+[[Message Type>>||anchor="H2.3.6MessageType"]]
850	850	Always 0x02
851	851	)))
852	852
...	...	@@ -986,9 +986,13 @@
986	986
987	987	=== ​4.3.2 Replace the battery ===
988	988
	1199	+(((
989	989	You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
	1201	+)))
990	990
	1203	+(((
991	991	The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
	1205	+)))
992	992
993	993
994	994
...	...	@@ -1009,24 +1009,24 @@
1009	1009	(% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1010	1010
1011	1011
	1226	+(((
1012	1012	In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
	1228	+)))
1013	1013
1014	1014
1015	1015	[[image:1654593712276-618.png]]
1016	1016
1017		-Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
	1233	+Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1018	1018
1019	1019
1020		-
1021	1021	= 6. FAQ =
1022	1022
1023	1023	== 6.1 How to change the LoRa Frequency Bands/Region ==
1024	1024
1025		-You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
	1240	+You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1026	1026	When downloading the images, choose the required image file for download. ​
1027	1027
1028	1028
1029		-
1030	1030	= 7. Trouble Shooting =
1031	1031
1032	1032	== 7.1 AT Commands input doesn’t work ==
...	...	@@ -1051,7 +1051,6 @@
1051	1051	* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1052	1052	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1053	1053
1054		-
1055	1055	= 9. ​Packing Info =
1056	1056
1057	1057
...	...	@@ -1066,7 +1066,6 @@
1066	1066	* Package Size / pcs : cm
1067	1067	* Weight / pcs : g
1068	1068
1069		-
1070	1070	= 10. ​Support =
1071	1071
1072	1072	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1654826112831-311.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+257.0 KB

Content

1654826306458-414.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+109.3 KB

Content

image-20220610095606-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+183.2 KB

Content