Summary

• Page properties (2 modified, 0 added, 0 removed)
• Attachments (0 modified, 3 added, 0 removed)
  • 1654826112831-311.png
  • 1654826306458-414.png
  • image-20220610095606-1.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-LSPH01-LoRaWAN Soil pH Sensor User Manual
	1	+LLDS12-LoRaWAN LiDAR ToF Distance Sensor User Manual

Content

...	...	@@ -1,65 +1,9 @@
1	1	(% style="text-align:center" %)
2		-[[image:1654592399090-860.png||height="521" width="483"]]
	2	+[[image:image-20220610095606-1.png]]
3	3
4	4
5		-
6		-
7	7	**Contents:**
8	8
9		-* [[1. Introduction>>path:#H1.Introduction]]
10		-** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11		-** [[​1.2 Features>>path:#H200B1.2Features]]
12		-** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13		-** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14		-** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15		-* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16		-** [[2.1 How it works>>path:#H2.1Howitworks]]
17		-** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18		-** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19		-*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20		-*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21		-*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22		-*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23		-*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24		-*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25		-*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26		-** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27		-** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28		-** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29		-*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30		-*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31		-*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32		-** [[2.7 Calibration>>path:#H2.7Calibration]]
33		-** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34		-*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35		-*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36		-*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37		-*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38		-*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39		-*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40		-*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41		-** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42		-** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43		-* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44		-** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45		-** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46		-** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47		-** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48		-* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49		-** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50		-** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51		-** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52		-*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53		-*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54		-* [[5. Use AT Command>>path:#H5.UseATCommand]]
55		-** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56		-* [[6. FAQ>>path:#H6.FAQ]]
57		-** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58		-* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59		-** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60		-* [[8. Order Info>>path:#H8.OrderInfo]]
61		-* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62		-* [[10. ​Support>>path:#H10.A0200BSupport]]
63	63
64	64
65	65
...	...	@@ -66,67 +66,64 @@
66	66
67	67
68	68
	13	+= 1. Introduction =
69	69
	15	+== 1.1 ​What is LoRaWAN LiDAR ToF Distance Sensor ==
70	70
71		-= 1. Introduction =
	17	+(((
	18	+
72	72
73		-== 1.1 ​What is LoRaWAN Soil pH Sensor ==
	20	+The Dragino LLDS12 is a (% style="color:blue" %)**LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor**(%%) for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
74	74
75		-The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
	22	+The LLDS12 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
76	76
77		-LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
	24	+It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
78	78
79		-The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
	26	+The LoRa wireless technology used in LLDS12 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
80	80
81		-LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
	28	+LLDS12 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
82	82
83		-Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	30	+Each LLDS12 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	31	+)))
84	84
85	85
86		-[[image:1654592435432-887.png]]
	34	+[[image:1654826306458-414.png]]
87	87
88	88
89	89
	38	+
90	90	== ​1.2 Features ==
91	91
92	92	* LoRaWAN 1.0.3 Class A
93	93	* Ultra-low power consumption
94		-* Monitor soil pH with temperature compensation.
95		-* Monitor soil temperature
	43	+* Laser technology for distance detection
	44	+* Operating Range - 0.1m~~12m①
	45	+* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
96	96	* Monitor Battery Level
97		-* Support pH calibration by end user
98	98	* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
99	99	* AT Commands to change parameters
100	100	* Uplink on periodically
101	101	* Downlink to change configure
102		-* IP66 Waterproof Enclosure
103		-* IP68 rate for the Sensor Probe
104	104	* 8500mAh Battery for long term use
105	105
106	106
107		-
108	108	== 1.3 Probe Specification ==
109	109
110	110
111		-(% style="color:#4f81bd" %)**Soil pH:**
	57	+* Storage temperature ：-20℃~~75℃
	58	+* Operating temperature - -20℃~~60℃
	59	+* Operating Range - 0.1m~~12m①
	60	+* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
	61	+* Distance resolution - 5mm
	62	+* Ambient light immunity - 70klux
	63	+* Enclosure rating - IP65
	64	+* Light source - LED
	65	+* Central wavelength - 850nm
	66	+* FOV - 3.6°
	67	+* Material of enclosure - ABS+PC
	68	+* Wire length - 25cm
112	112
113		-* Range: 3 ~~ 10 pH
114		-* Resolution: 0.01 pH
115		-* Accuracy: ±2% under (0~~50 ℃, Accuracy will poor under 0 due to frozen)
116		-* Temperature Compensation Range: 0 ~~ 50℃
117		-* IP68 Protection
118		-* Length: 3.5 meters
119	119
120		-(% style="color:#4f81bd" %)**Soil Temperature:**
121		-
122		-* Range -40℃～85℃
123		-* Resolution: 0.1℃
124		-* Accuracy: <±0.5℃(-10℃～40℃)，<±0.8℃ (others)
125		-* IP68 Protection
126		-* Length: 3.5 meters
127		-
128		-
129		-
130	130	== 1.4 ​Applications ==
131	131
132	132	* Smart Agriculture
...	...	@@ -148,7 +148,7 @@
148	148	)))
149	149
150	150	(((
151		-In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
	92	+In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
152	152	)))
153	153
154	154
...	...	@@ -211,7 +211,9 @@
211	211	[[image:image-20220607170442-2.png]]
212	212
213	213
	155	+(((
214	214	(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	157	+)))
215	215
216	216	[[image:1654592697690-910.png]]
217	217
...	...	@@ -219,26 +219,30 @@
219	219
220	220	== 2.3 ​Uplink Payload ==
221	221
	165	+(((
222	222	LSPH01 will uplink payload via LoRaWAN with below payload format:
	167	+)))
223	223
	169	+(((
224	224	Uplink payload includes in total 11 bytes.
	171	+)))
225	225
	173	+(((
226	226	Normal uplink payload:
	175	+)))
227	227
228	228	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
229		-|(((
230		-**Size**
	178	+|=(% style="width: 62.5px;" %)(((
	179	+**Size (bytes)**
	180	+)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
	181	+|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
	182	+[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
231	231
232		-**(bytes)**
233		-)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
234		-|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
235		-[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
236		-
237		-[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
238		-)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
239		-[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
	184	+[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
	185	+)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
	186	+[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
240	240	)))|Reserve|(((
241		-[[Message Type>>path:#H2.3.6MessageType]]
	188	+[[Message Type>>||anchor="H2.3.6MessageType"]]
242	242	)))
243	243
244	244	[[image:1654592721645-318.png]]
...	...	@@ -294,7 +294,7 @@
294	294
295	295	=== 2.3.5 Interrupt Pin ===
296	296
297		-This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
	244	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
298	298
299	299
300	300	**Example:**
...	...	@@ -307,20 +307,21 @@
307	307
308	308	=== 2.3.6 Message Type ===
309	309
	257	+(((
310	310	For a normal uplink payload, the message type is always 0x01.
	259	+)))
311	311
	261	+(((
312	312	Valid Message Type:
	263	+)))
313	313
314	314
315		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
316		-|**Message Type Code**|**Description**|**Payload**
317		-|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
318		-|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
319		-|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
	266	+(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
	267	+|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
	268	+|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
	269	+|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
	270	+|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
320	320
321		-
322		-
323		-
324	324	=== 2.3.7 Decode payload in The Things Network ===
325	325
326	326	While using TTN network, you can add the payload format to decode the payload.
...	...	@@ -340,18 +340,27 @@
340	340
341	341	== 2.4 Uplink Interval ==
342	342
343		-The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
	291	+The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
344	344
345	345
346	346
347	347	== 2.5 ​Show Data in DataCake IoT Server ==
348	348
	297	+(((
349	349	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
	299	+)))
350	350
	301	+(((
	302	+
	303	+)))
351	351
	305	+(((
352	352	(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
	307	+)))
353	353
	309	+(((
354	354	(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
	311	+)))
355	355
356	356
357	357	[[image:1654592790040-760.png]]
...	...	@@ -374,9 +374,13 @@
374	374	[[image:1654592856403-259.png]]
375	375
376	376
	334	+(((
377	377	(% style="color:blue" %)**Step 5**(%%)**: add payload decode**
	336	+)))
378	378
	338	+(((
379	379	Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
	340	+)))
380	380
381	381
382	382	[[image:1654592878525-845.png]]
...	...	@@ -399,8 +399,10 @@
399	399	=== 2.6.1 Before measurement ===
400	400
401	401	(((
	363	+(((
402	402	If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.
403	403	)))
	366	+)))
404	404
405	405
406	406
...	...	@@ -407,24 +407,45 @@
407	407	=== 2.6.2 Measurement ===
408	408
409	409
	373	+(((
410	410	(% style="color:#4f81bd" %)**Measurement the soil surface:**
	375	+)))
411	411
	377	+(((
412	412	[[image:1654592946732-634.png]]
	379	+)))
413	413
	381	+(((
414	414	Choose the proper measuring position. Split the surface soil according to the measured deep.
	383	+)))
415	415
	385	+(((
416	416	Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
	387	+)))
417	417
	389	+(((
418	418	Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
	391	+)))
419	419
	393	+(((
420	420	Put soil over the probe after insert. And start to measure.
	395	+)))
421	421
	397	+(((
	398	+
	399	+)))
422	422
	401	+(((
423	423	(% style="color:#4f81bd" %)**Measurement inside soil:**
	403	+)))
424	424
	405	+(((
425	425	Dig a hole with diameter > 20CM.
	407	+)))
426	426
	409	+(((
427	427	Insert the probe inside, method like measure the surface.
	411	+)))
428	428
429	429
430	430
...	...	@@ -454,9 +454,13 @@
454	454
455	455	== 2.7 Calibration ==
456	456
	441	+(((
457	457	User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
	443	+)))
458	458
	445	+(((
459	459	After stable, user can use below command to calibrate.
	447	+)))
460	460
461	461	[[image:image-20220607171149-4.png]]
462	462
...	...	@@ -463,12 +463,10 @@
463	463
464	464	(% style="color:#037691" %)**Calibration Payload**
465	465
466		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
467		-|(((
468		-**Size**
469		-
470		-**(bytes)**
471		-)))|**1**|**1**|**1**|**7**|**1**
	454	+(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
	455	+|=(% style="width: 62.5px;" %)(((
	456	+**Size (bytes)**
	457	+)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
472	472	|**Value**|(((
473	473	PH4
474	474
...	...	@@ -478,7 +478,7 @@
478	478
479	479	Calibrate value
480	480	)))|Reserve|(((
481		-[[Message Type>>path:#H2.3.6MessageType]]
	467	+[[Message Type>>||anchor="H2.3.6MessageType"]]
482	482
483	483	Always 0x03
484	484	)))
...	...	@@ -491,9 +491,6 @@
491	491	* Reply to the confirmation package: 14 01
492	492	* Reply to non-confirmed packet: 14 00
493	493
494		-
495		-
496		-
497	497	== 2.8 Frequency Plans ==
498	498
499	499	(((
...	...	@@ -503,32 +503,61 @@
503	503
504	504	=== 2.8.1 EU863-870 (EU868) ===
505	505
	489	+(((
506	506	(% style="color:blue" %)**Uplink:**
	491	+)))
507	507
	493	+(((
508	508	868.1 - SF7BW125 to SF12BW125
	495	+)))
509	509
	497	+(((
510	510	868.3 - SF7BW125 to SF12BW125 and SF7BW250
	499	+)))
511	511
	501	+(((
512	512	868.5 - SF7BW125 to SF12BW125
	503	+)))
513	513
	505	+(((
514	514	867.1 - SF7BW125 to SF12BW125
	507	+)))
515	515
	509	+(((
516	516	867.3 - SF7BW125 to SF12BW125
	511	+)))
517	517
	513	+(((
518	518	867.5 - SF7BW125 to SF12BW125
	515	+)))
519	519
	517	+(((
520	520	867.7 - SF7BW125 to SF12BW125
	519	+)))
521	521
	521	+(((
522	522	867.9 - SF7BW125 to SF12BW125
	523	+)))
523	523
	525	+(((
524	524	868.8 - FSK
	527	+)))
525	525
	529	+(((
	530	+
	531	+)))
526	526
	533	+(((
527	527	(% style="color:blue" %)**Downlink:**
	535	+)))
528	528
	537	+(((
529	529	Uplink channels 1-9 (RX1)
	539	+)))
530	530
	541	+(((
531	531	869.525 - SF9BW125 (RX2 downlink only)
	543	+)))
532	532
533	533
534	534
...	...	@@ -549,49 +549,91 @@
549	549	* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
550	550	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
551	551
552		-
553	553	=== 2.8.3 CN470-510 (CN470) ===
554	554
	566	+(((
555	555	Used in China, Default use CHE=1
	568	+)))
556	556
	570	+(((
557	557	(% style="color:blue" %)**Uplink:**
	572	+)))
558	558
	574	+(((
559	559	486.3 - SF7BW125 to SF12BW125
	576	+)))
560	560
	578	+(((
561	561	486.5 - SF7BW125 to SF12BW125
	580	+)))
562	562
	582	+(((
563	563	486.7 - SF7BW125 to SF12BW125
	584	+)))
564	564
	586	+(((
565	565	486.9 - SF7BW125 to SF12BW125
	588	+)))
566	566
	590	+(((
567	567	487.1 - SF7BW125 to SF12BW125
	592	+)))
568	568
	594	+(((
569	569	487.3 - SF7BW125 to SF12BW125
	596	+)))
570	570
	598	+(((
571	571	487.5 - SF7BW125 to SF12BW125
	600	+)))
572	572
	602	+(((
573	573	487.7 - SF7BW125 to SF12BW125
	604	+)))
574	574
	606	+(((
	607	+
	608	+)))
575	575
	610	+(((
576	576	(% style="color:blue" %)**Downlink:**
	612	+)))
577	577
	614	+(((
578	578	506.7 - SF7BW125 to SF12BW125
	616	+)))
579	579
	618	+(((
580	580	506.9 - SF7BW125 to SF12BW125
	620	+)))
581	581
	622	+(((
582	582	507.1 - SF7BW125 to SF12BW125
	624	+)))
583	583
	626	+(((
584	584	507.3 - SF7BW125 to SF12BW125
	628	+)))
585	585
	630	+(((
586	586	507.5 - SF7BW125 to SF12BW125
	632	+)))
587	587
	634	+(((
588	588	507.7 - SF7BW125 to SF12BW125
	636	+)))
589	589
	638	+(((
590	590	507.9 - SF7BW125 to SF12BW125
	640	+)))
591	591
	642	+(((
592	592	508.1 - SF7BW125 to SF12BW125
	644	+)))
593	593
	646	+(((
594	594	505.3 - SF12BW125 (RX2 downlink only)
	648	+)))
595	595
596	596
597	597
...	...	@@ -616,111 +616,219 @@
616	616	* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
617	617	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
618	618
619		-
620	620	=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
621	621
	675	+(((
622	622	(% style="color:blue" %)**Default Uplink channel:**
	677	+)))
623	623
	679	+(((
624	624	923.2 - SF7BW125 to SF10BW125
	681	+)))
625	625
	683	+(((
626	626	923.4 - SF7BW125 to SF10BW125
	685	+)))
627	627
	687	+(((
	688	+
	689	+)))
628	628
	691	+(((
629	629	(% style="color:blue" %)**Additional Uplink Channel**:
	693	+)))
630	630
	695	+(((
631	631	(OTAA mode, channel added by JoinAccept message)
	697	+)))
632	632
	699	+(((
	700	+
	701	+)))
633	633
	703	+(((
634	634	(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
	705	+)))
635	635
	707	+(((
636	636	922.2 - SF7BW125 to SF10BW125
	709	+)))
637	637
	711	+(((
638	638	922.4 - SF7BW125 to SF10BW125
	713	+)))
639	639
	715	+(((
640	640	922.6 - SF7BW125 to SF10BW125
	717	+)))
641	641
	719	+(((
642	642	922.8 - SF7BW125 to SF10BW125
	721	+)))
643	643
	723	+(((
644	644	923.0 - SF7BW125 to SF10BW125
	725	+)))
645	645
	727	+(((
646	646	922.0 - SF7BW125 to SF10BW125
	729	+)))
647	647
	731	+(((
	732	+
	733	+)))
648	648
	735	+(((
649	649	(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
	737	+)))
650	650
	739	+(((
651	651	923.6 - SF7BW125 to SF10BW125
	741	+)))
652	652
	743	+(((
653	653	923.8 - SF7BW125 to SF10BW125
	745	+)))
654	654
	747	+(((
655	655	924.0 - SF7BW125 to SF10BW125
	749	+)))
656	656
	751	+(((
657	657	924.2 - SF7BW125 to SF10BW125
	753	+)))
658	658
	755	+(((
659	659	924.4 - SF7BW125 to SF10BW125
	757	+)))
660	660
	759	+(((
661	661	924.6 - SF7BW125 to SF10BW125
	761	+)))
662	662
	763	+(((
	764	+
	765	+)))
663	663
	767	+(((
664	664	(% style="color:blue" %)**Downlink:**
	769	+)))
665	665
	771	+(((
666	666	Uplink channels 1-8 (RX1)
	773	+)))
667	667
	775	+(((
668	668	923.2 - SF10BW125 (RX2)
	777	+)))
669	669
670	670
671	671
672	672	=== 2.8.6 KR920-923 (KR920) ===
673	673
	783	+(((
674	674	(% style="color:blue" %)**Default channel:**
	785	+)))
675	675
	787	+(((
676	676	922.1 - SF7BW125 to SF12BW125
	789	+)))
677	677
	791	+(((
678	678	922.3 - SF7BW125 to SF12BW125
	793	+)))
679	679
	795	+(((
680	680	922.5 - SF7BW125 to SF12BW125
	797	+)))
681	681
	799	+(((
	800	+
	801	+)))
682	682
	803	+(((
683	683	(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
	805	+)))
684	684
	807	+(((
685	685	922.1 - SF7BW125 to SF12BW125
	809	+)))
686	686
	811	+(((
687	687	922.3 - SF7BW125 to SF12BW125
	813	+)))
688	688
	815	+(((
689	689	922.5 - SF7BW125 to SF12BW125
	817	+)))
690	690
	819	+(((
691	691	922.7 - SF7BW125 to SF12BW125
	821	+)))
692	692
	823	+(((
693	693	922.9 - SF7BW125 to SF12BW125
	825	+)))
694	694
	827	+(((
695	695	923.1 - SF7BW125 to SF12BW125
	829	+)))
696	696
	831	+(((
697	697	923.3 - SF7BW125 to SF12BW125
	833	+)))
698	698
	835	+(((
	836	+
	837	+)))
699	699
	839	+(((
700	700	(% style="color:blue" %)**Downlink:**
	841	+)))
701	701
	843	+(((
702	702	Uplink channels 1-7(RX1)
	845	+)))
703	703
	847	+(((
704	704	921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
	849	+)))
705	705
706	706
707	707
708	708	=== 2.8.7 IN865-867 (IN865) ===
709	709
	855	+(((
710	710	(% style="color:blue" %)**Uplink:**
	857	+)))
711	711
	859	+(((
712	712	865.0625 - SF7BW125 to SF12BW125
	861	+)))
713	713
	863	+(((
714	714	865.4025 - SF7BW125 to SF12BW125
	865	+)))
715	715
	867	+(((
716	716	865.9850 - SF7BW125 to SF12BW125
	869	+)))
717	717
	871	+(((
	872	+
	873	+)))
718	718
	875	+(((
719	719	(% style="color:blue" %)**Downlink:**
	877	+)))
720	720
	879	+(((
721	721	Uplink channels 1-3 (RX1)
	881	+)))
722	722
	883	+(((
723	723	866.550 - SF10BW125 (RX2)
	885	+)))
724	724
725	725
726	726
...	...	@@ -731,7 +731,6 @@
731	731	* The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
732	732	* Blink once when device transmit a packet.
733	733
734		-
735	735	== 2.10 ​Firmware Change Log ==
736	736
737	737
...	...	@@ -746,26 +746,51 @@
746	746
747	747	= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
748	748
	910	+(((
749	749	Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
	912	+)))
750	750
751		-* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
752		-* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	914	+* (((
	915	+AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
	916	+)))
	917	+* (((
	918	+LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	919	+)))
753	753
	921	+(((
754	754	There are two kinds of commands to configure LSPH01, they are:
	923	+)))
755	755
756		-* (% style="color:#4f81bd" %)** General Commands**.
	925	+* (((
	926	+(% style="color:#4f81bd" %)** General Commands**.
	927	+)))
757	757
	929	+(((
758	758	These commands are to configure:
	931	+)))
759	759
760		-* General system settings like: uplink interval.
761		-* LoRaWAN protocol & radio related command.
	933	+* (((
	934	+General system settings like: uplink interval.
	935	+)))
	936	+* (((
	937	+LoRaWAN protocol & radio related command.
	938	+)))
762	762
	940	+(((
763	763	They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	942	+)))
764	764
	944	+(((
	945	+
	946	+)))
765	765
766		-* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
	948	+* (((
	949	+(% style="color:#4f81bd" %)** Commands special design for LSPH01**
	950	+)))
767	767
	952	+(((
768	768	These commands only valid for LSPH01, as below:
	954	+)))
769	769
770	770
771	771
...	...	@@ -779,18 +779,28 @@
779	779
780	780
781	781
	968	+(((
782	782	(% style="color:#037691" %)**Downlink Command: 0x01**
	970	+)))
783	783
	972	+(((
784	784	Format: Command Code (0x01) followed by 3 bytes time value.
	974	+)))
785	785
	976	+(((
786	786	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	978	+)))
787	787
788		-* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
789		-* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	980	+* (((
	981	+Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	982	+)))
	983	+* (((
	984	+Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
790	790
791	791
	987	+
	988	+)))
792	792
793		-
794	794	== 3.2 Set Interrupt Mode ==
795	795
796	796	Feature, Set Interrupt mode for GPIO_EXIT.
...	...	@@ -800,19 +800,34 @@
800	800	[[image:image-20220607171716-9.png]]
801	801
802	802
	999	+(((
803	803	(% style="color:#037691" %)**Downlink Command: 0x06**
	1001	+)))
804	804
	1003	+(((
805	805	Format: Command Code (0x06) followed by 3 bytes.
	1005	+)))
806	806
	1007	+(((
807	807	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
	1009	+)))
808	808
809		-* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
810		-* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1011	+* (((
	1012	+Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
	1013	+)))
	1014	+* (((
	1015	+Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1016	+)))
811	811
	1018	+(((
	1019	+
	1020	+)))
812	812
	1022	+
	1023	+
813	813	== 3.3 Calibrate Sensor ==
814	814
815		-Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
	1026	+Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
816	816
817	817
818	818
...	...	@@ -827,7 +827,6 @@
827	827	* Reply to the confirmation package: 26 01
828	828	* Reply to non-confirmed packet: 26 00
829	829
830		-
831	831	Device will send an uplink after got this downlink command. With below payload:
832	832
833	833	Configures info payload:
...	...	@@ -845,7 +845,7 @@
845	845
846	846	Version
847	847	)))|Sensor Type|Reserve|(((
848		-[[Message Type>>path:#H2.3.6MessageType]]
	1058	+[[Message Type>>||anchor="H2.3.6MessageType"]]
849	849	Always 0x02
850	850	)))
851	851
...	...	@@ -985,9 +985,13 @@
985	985
986	986	=== ​4.3.2 Replace the battery ===
987	987
	1198	+(((
988	988	You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
	1200	+)))
989	989
	1202	+(((
990	990	The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
	1204	+)))
991	991
992	992
993	993
...	...	@@ -1008,24 +1008,24 @@
1008	1008	(% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1009	1009
1010	1010
	1225	+(((
1011	1011	In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
	1227	+)))
1012	1012
1013	1013
1014	1014	[[image:1654593712276-618.png]]
1015	1015
1016		-Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
	1232	+Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1017	1017
1018	1018
1019		-
1020	1020	= 6. FAQ =
1021	1021
1022	1022	== 6.1 How to change the LoRa Frequency Bands/Region ==
1023	1023
1024		-You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
	1239	+You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1025	1025	When downloading the images, choose the required image file for download. ​
1026	1026
1027	1027
1028		-
1029	1029	= 7. Trouble Shooting =
1030	1030
1031	1031	== 7.1 AT Commands input doesn’t work ==
...	...	@@ -1050,7 +1050,6 @@
1050	1050	* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1051	1051	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1052	1052
1053		-
1054	1054	= 9. ​Packing Info =
1055	1055
1056	1056
...	...	@@ -1065,7 +1065,6 @@
1065	1065	* Package Size / pcs : cm
1066	1066	* Weight / pcs : g
1067	1067
1068		-
1069	1069	= 10. ​Support =
1070	1070
1071	1071	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1654826112831-311.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+257.0 KB

Content

1654826306458-414.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+109.3 KB

Content

image-20220610095606-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+183.2 KB

Content