Skip to Content
Last modified by Xiaoling on 2025/04/24 17:18
From version 73.1
edited by Xiaoling
on 2022/06/07 17:24
Change comment: There is no comment for this version
To version 88.4
edited by Xiaoling
on 2022/06/10 10:10
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LSPH01-LoRaWAN Soil pH Sensor User Manual
1 +LLDS12-LoRaWAN LiDAR ToF Distance Sensor User Manual
Content
... ... @@ -1,65 +1,9 @@
1 1  (% style="text-align:center" %)
2 -[[image:1654592399090-860.png||height="521" width="483"]]
2 +[[image:image-20220610095606-1.png]]
3 3  
4 4  
5 -
6 -
7 7  **Contents:**
8 8  
9 -* [[1. Introduction>>path:#H1.Introduction]]
10 -** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11 -** [[​1.2 Features>>path:#H200B1.2Features]]
12 -** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13 -** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14 -** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15 -* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16 -** [[2.1 How it works>>path:#H2.1Howitworks]]
17 -** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18 -** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19 -*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20 -*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21 -*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22 -*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23 -*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24 -*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25 -*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26 -** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27 -** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28 -** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29 -*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30 -*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31 -*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32 -** [[2.7 Calibration>>path:#H2.7Calibration]]
33 -** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34 -*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35 -*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36 -*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37 -*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38 -*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39 -*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40 -*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41 -** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42 -** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43 -* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44 -** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45 -** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46 -** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47 -** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48 -* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49 -** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50 -** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51 -** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52 -*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53 -*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54 -* [[5. Use AT Command>>path:#H5.UseATCommand]]
55 -** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56 -* [[6. FAQ>>path:#H6.FAQ]]
57 -** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58 -* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59 -** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60 -* [[8. Order Info>>path:#H8.OrderInfo]]
61 -* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 -* [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 65  
... ... @@ -66,46 +66,49 @@
66 66  
67 67  
68 68  
13 += 1. Introduction =
69 69  
15 +== 1.1 ​What is LoRaWAN LiDAR ToF Distance Sensor ==
70 70  
17 +(((
18 +
71 71  
20 +The Dragino LLDS12 is a (% style="color:blue" %)**LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor**(%%) for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
72 72  
73 -= 1. Introduction =
22 +The LLDS12 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
74 74  
75 -== 1.1 ​What is LoRaWAN Soil pH Sensor ==
24 +It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
76 76  
77 -The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
26 +The LoRa wireless technology used in LLDS12 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
78 78  
79 -LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
28 +LLDS12 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
80 80  
81 -The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
30 +Each LLDS12 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
31 +)))
82 82  
83 -LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
84 84  
85 -Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
34 +[[image:1654826306458-414.png]]
86 86  
87 87  
88 -[[image:1654592435432-887.png]]
89 89  
90 90  
91 -
92 92  == ​1.2 Features ==
93 93  
94 94  * LoRaWAN 1.0.3 Class A
95 95  * Ultra-low power consumption
96 -* Monitor soil pH with temperature compensation.
97 -* Monitor soil temperature
43 +* Laser technology for distance detection
44 +* Operating Range - 0.1m~~12m①
45 +* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
98 98  * Monitor Battery Level
99 -* Support pH calibration by end user
100 100  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
101 101  * AT Commands to change parameters
102 102  * Uplink on periodically
103 103  * Downlink to change configure
104 -* IP66 Waterproof Enclosure
105 -* IP68 rate for the Sensor Probe
106 106  * 8500mAh Battery for long term use
107 107  
108 108  
54 +
55 +
109 109  == 1.3 Probe Specification ==
110 110  
111 111  
... ... @@ -127,11 +127,12 @@
127 127  * Length: 3.5 meters
128 128  
129 129  
77 +
78 +
130 130  == 1.4 ​Applications ==
131 131  
132 132  * Smart Agriculture
133 133  
134 -
135 135  == 1.5 Pin mapping and power on ==
136 136  
137 137  [[image:1654592472094-134.png]]
... ... @@ -147,7 +147,7 @@
147 147  )))
148 148  
149 149  (((
150 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
98 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
151 151  )))
152 152  
153 153  
... ... @@ -210,7 +210,9 @@
210 210  [[image:image-20220607170442-2.png]]
211 211  
212 212  
161 +(((
213 213  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
163 +)))
214 214  
215 215  [[image:1654592697690-910.png]]
216 216  
... ... @@ -218,26 +218,30 @@
218 218  
219 219  == 2.3 ​Uplink Payload ==
220 220  
171 +(((
221 221  LSPH01 will uplink payload via LoRaWAN with below payload format: 
173 +)))
222 222  
175 +(((
223 223  Uplink payload includes in total 11 bytes.
177 +)))
224 224  
179 +(((
225 225  Normal uplink payload:
181 +)))
226 226  
227 227  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
228 -|(((
229 -**Size**
184 +|=(% style="width: 62.5px;" %)(((
185 +**Size (bytes)**
186 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
187 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
188 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
230 230  
231 -**(bytes)**
232 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
233 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
234 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
235 -
236 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
237 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
238 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
190 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
191 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
192 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
239 239  )))|Reserve|(((
240 -[[Message Type>>path:#H2.3.6MessageType]]
194 +[[Message Type>>||anchor="H2.3.6MessageType"]]
241 241  )))
242 242  
243 243  [[image:1654592721645-318.png]]
... ... @@ -293,7 +293,7 @@
293 293  
294 294  === 2.3.5 Interrupt Pin ===
295 295  
296 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
250 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
297 297  
298 298  
299 299  **Example:**
... ... @@ -306,19 +306,21 @@
306 306  
307 307  === 2.3.6 Message Type ===
308 308  
263 +(((
309 309  For a normal uplink payload, the message type is always 0x01.
265 +)))
310 310  
267 +(((
311 311  Valid Message Type:
269 +)))
312 312  
313 313  
314 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
315 -|**Message Type Code**|**Description**|**Payload**
316 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
317 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
318 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
272 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
273 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
274 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
275 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
276 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
319 319  
320 -
321 -
322 322  === 2.3.7 Decode payload in The Things Network ===
323 323  
324 324  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -338,18 +338,27 @@
338 338  
339 339  == 2.4 Uplink Interval ==
340 340  
341 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
297 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
342 342  
343 343  
344 344  
345 345  == 2.5 ​Show Data in DataCake IoT Server ==
346 346  
303 +(((
347 347  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
305 +)))
348 348  
307 +(((
308 +
309 +)))
349 349  
311 +(((
350 350  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
313 +)))
351 351  
315 +(((
352 352  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
317 +)))
353 353  
354 354  
355 355  [[image:1654592790040-760.png]]
... ... @@ -372,9 +372,13 @@
372 372  [[image:1654592856403-259.png]]
373 373  
374 374  
340 +(((
375 375  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
342 +)))
376 376  
344 +(((
377 377  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
346 +)))
378 378  
379 379  
380 380  [[image:1654592878525-845.png]]
... ... @@ -397,8 +397,10 @@
397 397  === 2.6.1 Before measurement ===
398 398  
399 399  (((
369 +(((
400 400  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
401 401  )))
372 +)))
402 402  
403 403  
404 404  
... ... @@ -405,24 +405,45 @@
405 405  === 2.6.2 Measurement ===
406 406  
407 407  
379 +(((
408 408  (% style="color:#4f81bd" %)**Measurement the soil surface:**
381 +)))
409 409  
383 +(((
410 410  [[image:1654592946732-634.png]]
385 +)))
411 411  
387 +(((
412 412  Choose the proper measuring position. Split the surface soil according to the measured deep.
389 +)))
413 413  
391 +(((
414 414  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
393 +)))
415 415  
395 +(((
416 416  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
397 +)))
417 417  
399 +(((
418 418  Put soil over the probe after insert. And start to measure.
401 +)))
419 419  
403 +(((
404 +
405 +)))
420 420  
407 +(((
421 421  (% style="color:#4f81bd" %)**Measurement inside soil:**
409 +)))
422 422  
411 +(((
423 423  Dig a hole with diameter > 20CM.
413 +)))
424 424  
415 +(((
425 425  Insert the probe inside, method like measure the surface.
417 +)))
426 426  
427 427  
428 428  
... ... @@ -452,9 +452,13 @@
452 452  
453 453  == 2.7 Calibration ==
454 454  
447 +(((
455 455  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
449 +)))
456 456  
451 +(((
457 457  After stable, user can use below command to calibrate.
453 +)))
458 458  
459 459  [[image:image-20220607171149-4.png]]
460 460  
... ... @@ -461,12 +461,10 @@
461 461  
462 462  (% style="color:#037691" %)**Calibration Payload**
463 463  
464 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
465 -|(((
466 -**Size**
467 -
468 -**(bytes)**
469 -)))|**1**|**1**|**1**|**7**|**1**
460 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
461 +|=(% style="width: 62.5px;" %)(((
462 +**Size (bytes)**
463 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
470 470  |**Value**|(((
471 471  PH4
472 472  
... ... @@ -476,12 +476,11 @@
476 476  
477 477  Calibrate value
478 478  )))|Reserve|(((
479 -[[Message Type>>path:#H2.3.6MessageType]]
473 +[[Message Type>>||anchor="H2.3.6MessageType"]]
480 480  
481 481  Always 0x03
482 482  )))
483 483  
484 -
485 485  User can also send 0x14 downlink command to poll the current calibration payload.
486 486  
487 487  [[image:image-20220607171416-7.jpeg]]
... ... @@ -491,7 +491,6 @@
491 491  * Reply to non-confirmed packet: 14 00
492 492  
493 493  
494 -
495 495  == 2.8 Frequency Plans ==
496 496  
497 497  (((
... ... @@ -501,32 +501,61 @@
501 501  
502 502  === 2.8.1 EU863-870 (EU868) ===
503 503  
496 +(((
504 504  (% style="color:blue" %)**Uplink:**
498 +)))
505 505  
500 +(((
506 506  868.1 - SF7BW125 to SF12BW125
502 +)))
507 507  
504 +(((
508 508  868.3 - SF7BW125 to SF12BW125 and SF7BW250
506 +)))
509 509  
508 +(((
510 510  868.5 - SF7BW125 to SF12BW125
510 +)))
511 511  
512 +(((
512 512  867.1 - SF7BW125 to SF12BW125
514 +)))
513 513  
516 +(((
514 514  867.3 - SF7BW125 to SF12BW125
518 +)))
515 515  
520 +(((
516 516  867.5 - SF7BW125 to SF12BW125
522 +)))
517 517  
524 +(((
518 518  867.7 - SF7BW125 to SF12BW125
526 +)))
519 519  
528 +(((
520 520  867.9 - SF7BW125 to SF12BW125
530 +)))
521 521  
532 +(((
522 522  868.8 - FSK
534 +)))
523 523  
536 +(((
537 +
538 +)))
524 524  
540 +(((
525 525  (% style="color:blue" %)**Downlink:**
542 +)))
526 526  
544 +(((
527 527  Uplink channels 1-9 (RX1)
546 +)))
528 528  
548 +(((
529 529  869.525 - SF9BW125 (RX2 downlink only)
550 +)))
530 530  
531 531  
532 532  
... ... @@ -548,50 +548,91 @@
548 548  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
549 549  
550 550  
551 -
552 -
553 553  === 2.8.3 CN470-510 (CN470) ===
554 554  
574 +(((
555 555  Used in China, Default use CHE=1
576 +)))
556 556  
578 +(((
557 557  (% style="color:blue" %)**Uplink:**
580 +)))
558 558  
582 +(((
559 559  486.3 - SF7BW125 to SF12BW125
584 +)))
560 560  
586 +(((
561 561  486.5 - SF7BW125 to SF12BW125
588 +)))
562 562  
590 +(((
563 563  486.7 - SF7BW125 to SF12BW125
592 +)))
564 564  
594 +(((
565 565  486.9 - SF7BW125 to SF12BW125
596 +)))
566 566  
598 +(((
567 567  487.1 - SF7BW125 to SF12BW125
600 +)))
568 568  
602 +(((
569 569  487.3 - SF7BW125 to SF12BW125
604 +)))
570 570  
606 +(((
571 571  487.5 - SF7BW125 to SF12BW125
608 +)))
572 572  
610 +(((
573 573  487.7 - SF7BW125 to SF12BW125
612 +)))
574 574  
614 +(((
615 +
616 +)))
575 575  
618 +(((
576 576  (% style="color:blue" %)**Downlink:**
620 +)))
577 577  
622 +(((
578 578  506.7 - SF7BW125 to SF12BW125
624 +)))
579 579  
626 +(((
580 580  506.9 - SF7BW125 to SF12BW125
628 +)))
581 581  
630 +(((
582 582  507.1 - SF7BW125 to SF12BW125
632 +)))
583 583  
634 +(((
584 584  507.3 - SF7BW125 to SF12BW125
636 +)))
585 585  
638 +(((
586 586  507.5 - SF7BW125 to SF12BW125
640 +)))
587 587  
642 +(((
588 588  507.7 - SF7BW125 to SF12BW125
644 +)))
589 589  
646 +(((
590 590  507.9 - SF7BW125 to SF12BW125
648 +)))
591 591  
650 +(((
592 592  508.1 - SF7BW125 to SF12BW125
652 +)))
593 593  
654 +(((
594 594  505.3 - SF12BW125 (RX2 downlink only)
656 +)))
595 595  
596 596  
597 597  
... ... @@ -616,113 +616,219 @@
616 616  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
617 617  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
618 618  
619 -
620 -
621 -
622 622  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
623 623  
683 +(((
624 624  (% style="color:blue" %)**Default Uplink channel:**
685 +)))
625 625  
687 +(((
626 626  923.2 - SF7BW125 to SF10BW125
689 +)))
627 627  
691 +(((
628 628  923.4 - SF7BW125 to SF10BW125
693 +)))
629 629  
695 +(((
696 +
697 +)))
630 630  
699 +(((
631 631  (% style="color:blue" %)**Additional Uplink Channel**:
701 +)))
632 632  
703 +(((
633 633  (OTAA mode, channel added by JoinAccept message)
705 +)))
634 634  
707 +(((
708 +
709 +)))
635 635  
711 +(((
636 636  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
713 +)))
637 637  
715 +(((
638 638  922.2 - SF7BW125 to SF10BW125
717 +)))
639 639  
719 +(((
640 640  922.4 - SF7BW125 to SF10BW125
721 +)))
641 641  
723 +(((
642 642  922.6 - SF7BW125 to SF10BW125
725 +)))
643 643  
727 +(((
644 644  922.8 - SF7BW125 to SF10BW125
729 +)))
645 645  
731 +(((
646 646  923.0 - SF7BW125 to SF10BW125
733 +)))
647 647  
735 +(((
648 648  922.0 - SF7BW125 to SF10BW125
737 +)))
649 649  
739 +(((
740 +
741 +)))
650 650  
743 +(((
651 651  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
745 +)))
652 652  
747 +(((
653 653  923.6 - SF7BW125 to SF10BW125
749 +)))
654 654  
751 +(((
655 655  923.8 - SF7BW125 to SF10BW125
753 +)))
656 656  
755 +(((
657 657  924.0 - SF7BW125 to SF10BW125
757 +)))
658 658  
759 +(((
659 659  924.2 - SF7BW125 to SF10BW125
761 +)))
660 660  
763 +(((
661 661  924.4 - SF7BW125 to SF10BW125
765 +)))
662 662  
767 +(((
663 663  924.6 - SF7BW125 to SF10BW125
769 +)))
664 664  
771 +(((
772 +
773 +)))
665 665  
775 +(((
666 666  (% style="color:blue" %)**Downlink:**
777 +)))
667 667  
779 +(((
668 668  Uplink channels 1-8 (RX1)
781 +)))
669 669  
783 +(((
670 670  923.2 - SF10BW125 (RX2)
785 +)))
671 671  
672 672  
673 673  
674 674  === 2.8.6 KR920-923 (KR920) ===
675 675  
791 +(((
676 676  (% style="color:blue" %)**Default channel:**
793 +)))
677 677  
795 +(((
678 678  922.1 - SF7BW125 to SF12BW125
797 +)))
679 679  
799 +(((
680 680  922.3 - SF7BW125 to SF12BW125
801 +)))
681 681  
803 +(((
682 682  922.5 - SF7BW125 to SF12BW125
805 +)))
683 683  
807 +(((
808 +
809 +)))
684 684  
811 +(((
685 685  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
813 +)))
686 686  
815 +(((
687 687  922.1 - SF7BW125 to SF12BW125
817 +)))
688 688  
819 +(((
689 689  922.3 - SF7BW125 to SF12BW125
821 +)))
690 690  
823 +(((
691 691  922.5 - SF7BW125 to SF12BW125
825 +)))
692 692  
827 +(((
693 693  922.7 - SF7BW125 to SF12BW125
829 +)))
694 694  
831 +(((
695 695  922.9 - SF7BW125 to SF12BW125
833 +)))
696 696  
835 +(((
697 697  923.1 - SF7BW125 to SF12BW125
837 +)))
698 698  
839 +(((
699 699  923.3 - SF7BW125 to SF12BW125
841 +)))
700 700  
843 +(((
844 +
845 +)))
701 701  
847 +(((
702 702  (% style="color:blue" %)**Downlink:**
849 +)))
703 703  
851 +(((
704 704  Uplink channels 1-7(RX1)
853 +)))
705 705  
855 +(((
706 706  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
857 +)))
707 707  
708 708  
709 709  
710 710  === 2.8.7 IN865-867 (IN865) ===
711 711  
863 +(((
712 712  (% style="color:blue" %)**Uplink:**
865 +)))
713 713  
867 +(((
714 714  865.0625 - SF7BW125 to SF12BW125
869 +)))
715 715  
871 +(((
716 716  865.4025 - SF7BW125 to SF12BW125
873 +)))
717 717  
875 +(((
718 718  865.9850 - SF7BW125 to SF12BW125
877 +)))
719 719  
879 +(((
880 +
881 +)))
720 720  
883 +(((
721 721  (% style="color:blue" %)**Downlink:**
885 +)))
722 722  
887 +(((
723 723  Uplink channels 1-3 (RX1)
889 +)))
724 724  
891 +(((
725 725  866.550 - SF10BW125 (RX2)
893 +)))
726 726  
727 727  
728 728  
... ... @@ -733,9 +733,6 @@
733 733  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
734 734  * Blink once when device transmit a packet.
735 735  
736 -
737 -
738 -
739 739  == 2.10 ​Firmware Change Log ==
740 740  
741 741  
... ... @@ -750,26 +750,51 @@
750 750  
751 751  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
752 752  
918 +(((
753 753  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
920 +)))
754 754  
755 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
756 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
922 +* (((
923 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
924 +)))
925 +* (((
926 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
927 +)))
757 757  
929 +(((
758 758  There are two kinds of commands to configure LSPH01, they are:
931 +)))
759 759  
760 -* (% style="color:#4f81bd" %)** General Commands**.
933 +* (((
934 +(% style="color:#4f81bd" %)** General Commands**.
935 +)))
761 761  
937 +(((
762 762  These commands are to configure:
939 +)))
763 763  
764 -* General system settings like: uplink interval.
765 -* LoRaWAN protocol & radio related command.
941 +* (((
942 +General system settings like: uplink interval.
943 +)))
944 +* (((
945 +LoRaWAN protocol & radio related command.
946 +)))
766 766  
948 +(((
767 767  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
950 +)))
768 768  
952 +(((
953 +
954 +)))
769 769  
770 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
956 +* (((
957 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
958 +)))
771 771  
960 +(((
772 772  These commands only valid for LSPH01, as below:
962 +)))
773 773  
774 774  
775 775  
... ... @@ -783,16 +783,27 @@
783 783  
784 784  
785 785  
976 +(((
786 786  (% style="color:#037691" %)**Downlink Command: 0x01**
978 +)))
787 787  
980 +(((
788 788  Format: Command Code (0x01) followed by 3 bytes time value.
982 +)))
789 789  
984 +(((
790 790  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
986 +)))
791 791  
792 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
793 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
988 +* (((
989 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
990 +)))
991 +* (((
992 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
794 794  
795 795  
995 +
996 +)))
796 796  
797 797  == 3.2 Set Interrupt Mode ==
798 798  
... ... @@ -803,21 +803,34 @@
803 803  [[image:image-20220607171716-9.png]]
804 804  
805 805  
1007 +(((
806 806  (% style="color:#037691" %)**Downlink Command: 0x06**
1009 +)))
807 807  
1011 +(((
808 808  Format: Command Code (0x06) followed by 3 bytes.
1013 +)))
809 809  
1015 +(((
810 810  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1017 +)))
811 811  
812 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
813 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1019 +* (((
1020 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1021 +)))
1022 +* (((
1023 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1024 +)))
814 814  
1026 +(((
1027 +
1028 +)))
815 815  
816 816  
817 817  
818 818  == 3.3 Calibrate Sensor ==
819 819  
820 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1034 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
821 821  
822 822  
823 823  
... ... @@ -832,7 +832,6 @@
832 832  * Reply to the confirmation package: 26 01
833 833  * Reply to non-confirmed packet: 26 00
834 834  
835 -
836 836  Device will send an uplink after got this downlink command. With below payload:
837 837  
838 838  Configures info payload:
... ... @@ -850,7 +850,7 @@
850 850  
851 851  Version
852 852  )))|Sensor Type|Reserve|(((
853 -[[Message Type>>path:#H2.3.6MessageType]]
1066 +[[Message Type>>||anchor="H2.3.6MessageType"]]
854 854  Always 0x02
855 855  )))
856 856  
... ... @@ -990,9 +990,13 @@
990 990  
991 991  === ​4.3.2 Replace the battery ===
992 992  
1206 +(((
993 993  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1208 +)))
994 994  
1210 +(((
995 995  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1212 +)))
996 996  
997 997  
998 998  
... ... @@ -1013,24 +1013,24 @@
1013 1013  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1014 1014  
1015 1015  
1233 +(((
1016 1016  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1235 +)))
1017 1017  
1018 1018  
1019 1019   [[image:1654593712276-618.png]]
1020 1020  
1021 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1240 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1022 1022  
1023 1023  
1024 -
1025 1025  = 6. FAQ =
1026 1026  
1027 1027  == 6.1 How to change the LoRa Frequency Bands/Region ==
1028 1028  
1029 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1247 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1030 1030  When downloading the images, choose the required image file for download. ​
1031 1031  
1032 1032  
1033 -
1034 1034  = 7. Trouble Shooting =
1035 1035  
1036 1036  == 7.1 AT Commands input doesn’t work ==
... ... @@ -1055,9 +1055,6 @@
1055 1055  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1056 1056  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1057 1057  
1058 -
1059 -
1060 -
1061 1061  = 9. ​Packing Info =
1062 1062  
1063 1063  
... ... @@ -1072,9 +1072,6 @@
1072 1072  * Package Size / pcs : cm
1073 1073  * Weight / pcs : g
1074 1074  
1075 -
1076 -
1077 -
1078 1078  = 10. ​Support =
1079 1079  
1080 1080  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1654826112831-311.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +257.0 KB
Content
1654826306458-414.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +109.3 KB
Content
image-20220610095606-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +183.2 KB
Content