Changes for page LSN50v2-D20-D22-D23 LoRaWAN Temperature Sensor User Manual

Summary

• Page properties (2 modified, 0 added, 0 removed)
• Attachments (0 modified, 3 added, 0 removed)
  • 1654826112831-311.png
  • 1654826306458-414.png
  • image-20220610095606-1.png

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-LSPH01-LoRaWAN Soil pH Sensor User Manual
	1	+LLDS12-LoRaWAN LiDAR ToF Distance Sensor User Manual

Content

...	...	@@ -1,65 +1,9 @@
1	1	(% style="text-align:center" %)
2		-[[image:1654592399090-860.png||height="521" width="483"]]
	2	+[[image:image-20220610095606-1.png]]
3	3
4	4
5		-
6		-
7	7	**Contents:**
8	8
9		-* [[1. Introduction>>path:#H1.Introduction]]
10		-** [[1.1 ​What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
11		-** [[​1.2 Features>>path:#H200B1.2Features]]
12		-** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
13		-** [[1.4 ​Applications>>path:#H1.4200BApplications]]
14		-** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
15		-* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
16		-** [[2.1 How it works>>path:#H2.1Howitworks]]
17		-** [[2.2 ​Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
18		-** [[2.3 ​Uplink Payload>>path:#H2.3200BUplinkPayload]]
19		-*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
20		-*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
21		-*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
22		-*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
23		-*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
24		-*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
25		-*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
26		-** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
27		-** [[2.5 ​Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
28		-** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
29		-*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
30		-*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
31		-*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
32		-** [[2.7 Calibration>>path:#H2.7Calibration]]
33		-** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
34		-*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
35		-*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
36		-*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
37		-*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
38		-*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
39		-*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
40		-*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
41		-** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
42		-** [[2.10 ​Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
43		-* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
44		-** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
45		-** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
46		-** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
47		-** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
48		-* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
49		-** [[4.1 Battery Type>>path:#H4.1BatteryType]]
50		-** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
51		-** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
52		-*** [[4.3.1 ​Battery Note>>path:#H4.3.1200BBatteryNote]]
53		-*** [[​4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
54		-* [[5. Use AT Command>>path:#H5.UseATCommand]]
55		-** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
56		-* [[6. FAQ>>path:#H6.FAQ]]
57		-** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
58		-* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
59		-** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
60		-* [[8. Order Info>>path:#H8.OrderInfo]]
61		-* [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62		-* [[10. ​Support>>path:#H10.A0200BSupport]]
63	63
64	64
65	65
...	...	@@ -66,43 +66,44 @@
66	66
67	67
68	68
	13	+= 1. Introduction =
69	69
	15	+== 1.1 ​What is LoRaWAN LiDAR ToF Distance Sensor ==
70	70
	17	+(((
	18	+
71	71
	20	+The Dragino LLDS12 is a (% style="color:blue" %)**LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor**(%%) for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
72	72
73		-= 1. Introduction =
	22	+The LLDS12 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
74	74
75		-== 1.1 ​What is LoRaWAN Soil pH Sensor ==
	24	+It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
76	76
77		-The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
	26	+The LoRa wireless technology used in LLDS12 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
78	78
79		-LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
	28	+LLDS12 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
80	80
81		-The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
	30	+Each LLDS12 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	31	+)))
82	82
83		-LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
84	84
85		-Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	34	+[[image:1654826306458-414.png]]
86	86
87	87
88		-[[image:1654592435432-887.png]]
89	89
90	90
91		-
92	92	== ​1.2 Features ==
93	93
94	94	* LoRaWAN 1.0.3 Class A
95	95	* Ultra-low power consumption
96		-* Monitor soil pH with temperature compensation.
97		-* Monitor soil temperature
	43	+* Laser technology for distance detection
	44	+* Operating Range - 0.1m~~12m①
	45	+* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
98	98	* Monitor Battery Level
99		-* Support pH calibration by end user
100	100	* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
101	101	* AT Commands to change parameters
102	102	* Uplink on periodically
103	103	* Downlink to change configure
104		-* IP66 Waterproof Enclosure
105		-* IP68 rate for the Sensor Probe
106	106	* 8500mAh Battery for long term use
107	107
108	108
...	...	@@ -109,29 +109,26 @@
109	109	== 1.3 Probe Specification ==
110	110
111	111
112		-(% style="color:#4f81bd" %)**Soil pH:**
	57	+* Storage temperature ：-20℃~~75℃
	58	+* Operating temperature - -20℃~~60℃
	59	+* Operating Range - 0.1m~~12m①
	60	+* Accuracy - ±5cm@(0.1-6m), ±1%@(6m-12m)
	61	+* Distance resolution - 5mm
	62	+* Ambient light immunity - 70klux
	63	+* Enclosure rating - IP65
	64	+* Light source - LED
	65	+* Central wavelength - 850nm
	66	+* FOV - 3.6°
	67	+* Material of enclosure - ABS+PC
	68	+* Wire length - 25cm
113	113
114		-* Range: 3 ~~ 10 pH
115		-* Resolution: 0.01 pH
116		-* Accuracy: ±2% under (0~~50 ℃, Accuracy will poor under 0 due to frozen)
117		-* Temperature Compensation Range: 0 ~~ 50℃
118		-* IP68 Protection
119		-* Length: 3.5 meters
120	120
121		-(% style="color:#4f81bd" %)**Soil Temperature:**
122		-
123		-* Range -40℃～85℃
124		-* Resolution: 0.1℃
125		-* Accuracy: <±0.5℃(-10℃～40℃)，<±0.8℃ (others)
126		-* IP68 Protection
127		-* Length: 3.5 meters
128		-
129		-
130	130	== 1.4 ​Applications ==
131	131
132	132	* Smart Agriculture
133	133
134	134
	76	+
135	135	== 1.5 Pin mapping and power on ==
136	136
137	137	[[image:1654592472094-134.png]]
...	...	@@ -147,7 +147,7 @@
147	147	)))
148	148
149	149	(((
150		-In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
	92	+In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
151	151	)))
152	152
153	153
...	...	@@ -210,7 +210,9 @@
210	210	[[image:image-20220607170442-2.png]]
211	211
212	212
	155	+(((
213	213	(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	157	+)))
214	214
215	215	[[image:1654592697690-910.png]]
216	216
...	...	@@ -218,26 +218,30 @@
218	218
219	219	== 2.3 ​Uplink Payload ==
220	220
	165	+(((
221	221	LSPH01 will uplink payload via LoRaWAN with below payload format:
	167	+)))
222	222
	169	+(((
223	223	Uplink payload includes in total 11 bytes.
	171	+)))
224	224
	173	+(((
225	225	Normal uplink payload:
	175	+)))
226	226
227	227	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
228		-|(((
229		-**Size**
	178	+|=(% style="width: 62.5px;" %)(((
	179	+**Size (bytes)**
	180	+)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
	181	+|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
	182	+[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
230	230
231		-**(bytes)**
232		-)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
233		-|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
234		-[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
235		-
236		-[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
237		-)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
238		-[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
	184	+[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
	185	+)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
	186	+[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
239	239	)))|Reserve|(((
240		-[[Message Type>>path:#H2.3.6MessageType]]
	188	+[[Message Type>>||anchor="H2.3.6MessageType"]]
241	241	)))
242	242
243	243	[[image:1654592721645-318.png]]
...	...	@@ -293,7 +293,7 @@
293	293
294	294	=== 2.3.5 Interrupt Pin ===
295	295
296		-This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
	244	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
297	297
298	298
299	299	**Example:**
...	...	@@ -306,19 +306,21 @@
306	306
307	307	=== 2.3.6 Message Type ===
308	308
	257	+(((
309	309	For a normal uplink payload, the message type is always 0x01.
	259	+)))
310	310
	261	+(((
311	311	Valid Message Type:
	263	+)))
312	312
313	313
314		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
315		-|**Message Type Code**|**Description**|**Payload**
316		-|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
317		-|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
318		-|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
	266	+(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
	267	+|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
	268	+|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
	269	+|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
	270	+|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
319	319
320		-
321		-
322	322	=== 2.3.7 Decode payload in The Things Network ===
323	323
324	324	While using TTN network, you can add the payload format to decode the payload.
...	...	@@ -338,18 +338,27 @@
338	338
339	339	== 2.4 Uplink Interval ==
340	340
341		-The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
	291	+The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
342	342
343	343
344	344
345	345	== 2.5 ​Show Data in DataCake IoT Server ==
346	346
	297	+(((
347	347	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
	299	+)))
348	348
	301	+(((
	302	+
	303	+)))
349	349
	305	+(((
350	350	(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
	307	+)))
351	351
	309	+(((
352	352	(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
	311	+)))
353	353
354	354
355	355	[[image:1654592790040-760.png]]
...	...	@@ -372,9 +372,13 @@
372	372	[[image:1654592856403-259.png]]
373	373
374	374
	334	+(((
375	375	(% style="color:blue" %)**Step 5**(%%)**: add payload decode**
	336	+)))
376	376
	338	+(((
377	377	Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
	340	+)))
378	378
379	379
380	380	[[image:1654592878525-845.png]]
...	...	@@ -397,8 +397,10 @@
397	397	=== 2.6.1 Before measurement ===
398	398
399	399	(((
	363	+(((
400	400	If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.
401	401	)))
	366	+)))
402	402
403	403
404	404
...	...	@@ -405,24 +405,45 @@
405	405	=== 2.6.2 Measurement ===
406	406
407	407
	373	+(((
408	408	(% style="color:#4f81bd" %)**Measurement the soil surface:**
	375	+)))
409	409
	377	+(((
410	410	[[image:1654592946732-634.png]]
	379	+)))
411	411
	381	+(((
412	412	Choose the proper measuring position. Split the surface soil according to the measured deep.
	383	+)))
413	413
	385	+(((
414	414	Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
	387	+)))
415	415
	389	+(((
416	416	Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
	391	+)))
417	417
	393	+(((
418	418	Put soil over the probe after insert. And start to measure.
	395	+)))
419	419
	397	+(((
	398	+
	399	+)))
420	420
	401	+(((
421	421	(% style="color:#4f81bd" %)**Measurement inside soil:**
	403	+)))
422	422
	405	+(((
423	423	Dig a hole with diameter > 20CM.
	407	+)))
424	424
	409	+(((
425	425	Insert the probe inside, method like measure the surface.
	411	+)))
426	426
427	427
428	428
...	...	@@ -452,9 +452,13 @@
452	452
453	453	== 2.7 Calibration ==
454	454
	441	+(((
455	455	User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
	443	+)))
456	456
	445	+(((
457	457	After stable, user can use below command to calibrate.
	447	+)))
458	458
459	459	[[image:image-20220607171149-4.png]]
460	460
...	...	@@ -461,12 +461,10 @@
461	461
462	462	(% style="color:#037691" %)**Calibration Payload**
463	463
464		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
465		-|(((
466		-**Size**
467		-
468		-**(bytes)**
469		-)))|**1**|**1**|**1**|**7**|**1**
	454	+(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
	455	+|=(% style="width: 62.5px;" %)(((
	456	+**Size (bytes)**
	457	+)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
470	470	|**Value**|(((
471	471	PH4
472	472
...	...	@@ -476,12 +476,11 @@
476	476
477	477	Calibrate value
478	478	)))|Reserve|(((
479		-[[Message Type>>path:#H2.3.6MessageType]]
	467	+[[Message Type>>||anchor="H2.3.6MessageType"]]
480	480
481	481	Always 0x03
482	482	)))
483	483
484		-
485	485	User can also send 0x14 downlink command to poll the current calibration payload.
486	486
487	487	[[image:image-20220607171416-7.jpeg]]
...	...	@@ -490,8 +490,6 @@
490	490	* Reply to the confirmation package: 14 01
491	491	* Reply to non-confirmed packet: 14 00
492	492
493		-
494		-
495	495	== 2.8 Frequency Plans ==
496	496
497	497	(((
...	...	@@ -501,32 +501,61 @@
501	501
502	502	=== 2.8.1 EU863-870 (EU868) ===
503	503
	489	+(((
504	504	(% style="color:blue" %)**Uplink:**
	491	+)))
505	505
	493	+(((
506	506	868.1 - SF7BW125 to SF12BW125
	495	+)))
507	507
	497	+(((
508	508	868.3 - SF7BW125 to SF12BW125 and SF7BW250
	499	+)))
509	509
	501	+(((
510	510	868.5 - SF7BW125 to SF12BW125
	503	+)))
511	511
	505	+(((
512	512	867.1 - SF7BW125 to SF12BW125
	507	+)))
513	513
	509	+(((
514	514	867.3 - SF7BW125 to SF12BW125
	511	+)))
515	515
	513	+(((
516	516	867.5 - SF7BW125 to SF12BW125
	515	+)))
517	517
	517	+(((
518	518	867.7 - SF7BW125 to SF12BW125
	519	+)))
519	519
	521	+(((
520	520	867.9 - SF7BW125 to SF12BW125
	523	+)))
521	521
	525	+(((
522	522	868.8 - FSK
	527	+)))
523	523
	529	+(((
	530	+
	531	+)))
524	524
	533	+(((
525	525	(% style="color:blue" %)**Downlink:**
	535	+)))
526	526
	537	+(((
527	527	Uplink channels 1-9 (RX1)
	539	+)))
528	528
	541	+(((
529	529	869.525 - SF9BW125 (RX2 downlink only)
	543	+)))
530	530
531	531
532	532
...	...	@@ -547,51 +547,91 @@
547	547	* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
548	548	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
549	549
550		-
551		-
552		-
553	553	=== 2.8.3 CN470-510 (CN470) ===
554	554
	566	+(((
555	555	Used in China, Default use CHE=1
	568	+)))
556	556
	570	+(((
557	557	(% style="color:blue" %)**Uplink:**
	572	+)))
558	558
	574	+(((
559	559	486.3 - SF7BW125 to SF12BW125
	576	+)))
560	560
	578	+(((
561	561	486.5 - SF7BW125 to SF12BW125
	580	+)))
562	562
	582	+(((
563	563	486.7 - SF7BW125 to SF12BW125
	584	+)))
564	564
	586	+(((
565	565	486.9 - SF7BW125 to SF12BW125
	588	+)))
566	566
	590	+(((
567	567	487.1 - SF7BW125 to SF12BW125
	592	+)))
568	568
	594	+(((
569	569	487.3 - SF7BW125 to SF12BW125
	596	+)))
570	570
	598	+(((
571	571	487.5 - SF7BW125 to SF12BW125
	600	+)))
572	572
	602	+(((
573	573	487.7 - SF7BW125 to SF12BW125
	604	+)))
574	574
	606	+(((
	607	+
	608	+)))
575	575
	610	+(((
576	576	(% style="color:blue" %)**Downlink:**
	612	+)))
577	577
	614	+(((
578	578	506.7 - SF7BW125 to SF12BW125
	616	+)))
579	579
	618	+(((
580	580	506.9 - SF7BW125 to SF12BW125
	620	+)))
581	581
	622	+(((
582	582	507.1 - SF7BW125 to SF12BW125
	624	+)))
583	583
	626	+(((
584	584	507.3 - SF7BW125 to SF12BW125
	628	+)))
585	585
	630	+(((
586	586	507.5 - SF7BW125 to SF12BW125
	632	+)))
587	587
	634	+(((
588	588	507.7 - SF7BW125 to SF12BW125
	636	+)))
589	589
	638	+(((
590	590	507.9 - SF7BW125 to SF12BW125
	640	+)))
591	591
	642	+(((
592	592	508.1 - SF7BW125 to SF12BW125
	644	+)))
593	593
	646	+(((
594	594	505.3 - SF12BW125 (RX2 downlink only)
	648	+)))
595	595
596	596
597	597
...	...	@@ -616,113 +616,219 @@
616	616	* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
617	617	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
618	618
619		-
620		-
621		-
622	622	=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
623	623
	675	+(((
624	624	(% style="color:blue" %)**Default Uplink channel:**
	677	+)))
625	625
	679	+(((
626	626	923.2 - SF7BW125 to SF10BW125
	681	+)))
627	627
	683	+(((
628	628	923.4 - SF7BW125 to SF10BW125
	685	+)))
629	629
	687	+(((
	688	+
	689	+)))
630	630
	691	+(((
631	631	(% style="color:blue" %)**Additional Uplink Channel**:
	693	+)))
632	632
	695	+(((
633	633	(OTAA mode, channel added by JoinAccept message)
	697	+)))
634	634
	699	+(((
	700	+
	701	+)))
635	635
	703	+(((
636	636	(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
	705	+)))
637	637
	707	+(((
638	638	922.2 - SF7BW125 to SF10BW125
	709	+)))
639	639
	711	+(((
640	640	922.4 - SF7BW125 to SF10BW125
	713	+)))
641	641
	715	+(((
642	642	922.6 - SF7BW125 to SF10BW125
	717	+)))
643	643
	719	+(((
644	644	922.8 - SF7BW125 to SF10BW125
	721	+)))
645	645
	723	+(((
646	646	923.0 - SF7BW125 to SF10BW125
	725	+)))
647	647
	727	+(((
648	648	922.0 - SF7BW125 to SF10BW125
	729	+)))
649	649
	731	+(((
	732	+
	733	+)))
650	650
	735	+(((
651	651	(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
	737	+)))
652	652
	739	+(((
653	653	923.6 - SF7BW125 to SF10BW125
	741	+)))
654	654
	743	+(((
655	655	923.8 - SF7BW125 to SF10BW125
	745	+)))
656	656
	747	+(((
657	657	924.0 - SF7BW125 to SF10BW125
	749	+)))
658	658
	751	+(((
659	659	924.2 - SF7BW125 to SF10BW125
	753	+)))
660	660
	755	+(((
661	661	924.4 - SF7BW125 to SF10BW125
	757	+)))
662	662
	759	+(((
663	663	924.6 - SF7BW125 to SF10BW125
	761	+)))
664	664
	763	+(((
	764	+
	765	+)))
665	665
	767	+(((
666	666	(% style="color:blue" %)**Downlink:**
	769	+)))
667	667
	771	+(((
668	668	Uplink channels 1-8 (RX1)
	773	+)))
669	669
	775	+(((
670	670	923.2 - SF10BW125 (RX2)
	777	+)))
671	671
672	672
673	673
674	674	=== 2.8.6 KR920-923 (KR920) ===
675	675
	783	+(((
676	676	(% style="color:blue" %)**Default channel:**
	785	+)))
677	677
	787	+(((
678	678	922.1 - SF7BW125 to SF12BW125
	789	+)))
679	679
	791	+(((
680	680	922.3 - SF7BW125 to SF12BW125
	793	+)))
681	681
	795	+(((
682	682	922.5 - SF7BW125 to SF12BW125
	797	+)))
683	683
	799	+(((
	800	+
	801	+)))
684	684
	803	+(((
685	685	(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
	805	+)))
686	686
	807	+(((
687	687	922.1 - SF7BW125 to SF12BW125
	809	+)))
688	688
	811	+(((
689	689	922.3 - SF7BW125 to SF12BW125
	813	+)))
690	690
	815	+(((
691	691	922.5 - SF7BW125 to SF12BW125
	817	+)))
692	692
	819	+(((
693	693	922.7 - SF7BW125 to SF12BW125
	821	+)))
694	694
	823	+(((
695	695	922.9 - SF7BW125 to SF12BW125
	825	+)))
696	696
	827	+(((
697	697	923.1 - SF7BW125 to SF12BW125
	829	+)))
698	698
	831	+(((
699	699	923.3 - SF7BW125 to SF12BW125
	833	+)))
700	700
	835	+(((
	836	+
	837	+)))
701	701
	839	+(((
702	702	(% style="color:blue" %)**Downlink:**
	841	+)))
703	703
	843	+(((
704	704	Uplink channels 1-7(RX1)
	845	+)))
705	705
	847	+(((
706	706	921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
	849	+)))
707	707
708	708
709	709
710	710	=== 2.8.7 IN865-867 (IN865) ===
711	711
	855	+(((
712	712	(% style="color:blue" %)**Uplink:**
	857	+)))
713	713
	859	+(((
714	714	865.0625 - SF7BW125 to SF12BW125
	861	+)))
715	715
	863	+(((
716	716	865.4025 - SF7BW125 to SF12BW125
	865	+)))
717	717
	867	+(((
718	718	865.9850 - SF7BW125 to SF12BW125
	869	+)))
719	719
	871	+(((
	872	+
	873	+)))
720	720
	875	+(((
721	721	(% style="color:blue" %)**Downlink:**
	877	+)))
722	722
	879	+(((
723	723	Uplink channels 1-3 (RX1)
	881	+)))
724	724
	883	+(((
725	725	866.550 - SF10BW125 (RX2)
	885	+)))
726	726
727	727
728	728
...	...	@@ -733,9 +733,6 @@
733	733	* The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
734	734	* Blink once when device transmit a packet.
735	735
736		-
737		-
738		-
739	739	== 2.10 ​Firmware Change Log ==
740	740
741	741
...	...	@@ -750,26 +750,51 @@
750	750
751	751	= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
752	752
	910	+(((
753	753	Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
	912	+)))
754	754
755		-* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
756		-* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	914	+* (((
	915	+AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
	916	+)))
	917	+* (((
	918	+LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	919	+)))
757	757
	921	+(((
758	758	There are two kinds of commands to configure LSPH01, they are:
	923	+)))
759	759
760		-* (% style="color:#4f81bd" %)** General Commands**.
	925	+* (((
	926	+(% style="color:#4f81bd" %)** General Commands**.
	927	+)))
761	761
	929	+(((
762	762	These commands are to configure:
	931	+)))
763	763
764		-* General system settings like: uplink interval.
765		-* LoRaWAN protocol & radio related command.
	933	+* (((
	934	+General system settings like: uplink interval.
	935	+)))
	936	+* (((
	937	+LoRaWAN protocol & radio related command.
	938	+)))
766	766
	940	+(((
767	767	They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	942	+)))
768	768
	944	+(((
	945	+
	946	+)))
769	769
770		-* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
	948	+* (((
	949	+(% style="color:#4f81bd" %)** Commands special design for LSPH01**
	950	+)))
771	771
	952	+(((
772	772	These commands only valid for LSPH01, as below:
	954	+)))
773	773
774	774
775	775
...	...	@@ -783,16 +783,27 @@
783	783
784	784
785	785
	968	+(((
786	786	(% style="color:#037691" %)**Downlink Command: 0x01**
	970	+)))
787	787
	972	+(((
788	788	Format: Command Code (0x01) followed by 3 bytes time value.
	974	+)))
789	789
	976	+(((
790	790	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	978	+)))
791	791
792		-* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
793		-* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	980	+* (((
	981	+Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	982	+)))
	983	+* (((
	984	+Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
794	794
795	795
	987	+
	988	+)))
796	796
797	797	== 3.2 Set Interrupt Mode ==
798	798
...	...	@@ -803,21 +803,34 @@
803	803	[[image:image-20220607171716-9.png]]
804	804
805	805
	999	+(((
806	806	(% style="color:#037691" %)**Downlink Command: 0x06**
	1001	+)))
807	807
	1003	+(((
808	808	Format: Command Code (0x06) followed by 3 bytes.
	1005	+)))
809	809
	1007	+(((
810	810	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
	1009	+)))
811	811
812		-* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
813		-* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1011	+* (((
	1012	+Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
	1013	+)))
	1014	+* (((
	1015	+Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1016	+)))
814	814
	1018	+(((
	1019	+
	1020	+)))
815	815
816	816
817	817
818	818	== 3.3 Calibrate Sensor ==
819	819
820		-Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
	1026	+Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
821	821
822	822
823	823
...	...	@@ -832,7 +832,6 @@
832	832	* Reply to the confirmation package: 26 01
833	833	* Reply to non-confirmed packet: 26 00
834	834
835		-
836	836	Device will send an uplink after got this downlink command. With below payload:
837	837
838	838	Configures info payload:
...	...	@@ -850,7 +850,7 @@
850	850
851	851	Version
852	852	)))|Sensor Type|Reserve|(((
853		-[[Message Type>>path:#H2.3.6MessageType]]
	1058	+[[Message Type>>||anchor="H2.3.6MessageType"]]
854	854	Always 0x02
855	855	)))
856	856
...	...	@@ -990,9 +990,13 @@
990	990
991	991	=== ​4.3.2 Replace the battery ===
992	992
	1198	+(((
993	993	You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
	1200	+)))
994	994
	1202	+(((
995	995	The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
	1204	+)))
996	996
997	997
998	998
...	...	@@ -1013,24 +1013,24 @@
1013	1013	(% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1014	1014
1015	1015
	1225	+(((
1016	1016	In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
	1227	+)))
1017	1017
1018	1018
1019	1019	[[image:1654593712276-618.png]]
1020	1020
1021		-Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
	1232	+Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1022	1022
1023	1023
1024		-
1025	1025	= 6. FAQ =
1026	1026
1027	1027	== 6.1 How to change the LoRa Frequency Bands/Region ==
1028	1028
1029		-You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
	1239	+You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1030	1030	When downloading the images, choose the required image file for download. ​
1031	1031
1032	1032
1033		-
1034	1034	= 7. Trouble Shooting =
1035	1035
1036	1036	== 7.1 AT Commands input doesn’t work ==
...	...	@@ -1055,9 +1055,6 @@
1055	1055	* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1056	1056	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1057	1057
1058		-
1059		-
1060		-
1061	1061	= 9. ​Packing Info =
1062	1062
1063	1063
...	...	@@ -1072,9 +1072,6 @@
1072	1072	* Package Size / pcs : cm
1073	1073	* Weight / pcs : g
1074	1074
1075		-
1076		-
1077		-
1078	1078	= 10. ​Support =
1079	1079
1080	1080	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1654826112831-311.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+257.0 KB

Content

1654826306458-414.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+109.3 KB

Content

image-20220610095606-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+183.2 KB

Content