Skip to Content
Last modified by Xiaoling on 2025/04/24 17:18
From version 64.4
edited by Xiaoling
on 2022/06/07 17:14
Change comment: There is no comment for this version
To version 85.27
edited by Xiaoling
on 2022/06/08 11:53
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -61,28 +61,29 @@
61 61  * [[9. ​Packing Info>>path:#H9.200BPackingInfo]]
62 62  * [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 -
65 -
66 -
67 -
68 -
69 -
70 -
71 -
72 -
73 73  = 1. Introduction =
74 74  
75 75  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
76 76  
68 +(((
77 77  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
70 +)))
78 78  
72 +(((
79 79  LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
74 +)))
80 80  
76 +(((
81 81  The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
78 +)))
82 82  
80 +(((
83 83  LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
82 +)))
84 84  
84 +(((
85 85  Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
86 +)))
86 86  
87 87  
88 88  [[image:1654592435432-887.png]]
... ... @@ -89,6 +89,7 @@
89 89  
90 90  
91 91  
93 +
92 92  == ​1.2 Features ==
93 93  
94 94  * LoRaWAN 1.0.3 Class A
... ... @@ -147,7 +147,7 @@
147 147  )))
148 148  
149 149  (((
150 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
152 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
151 151  )))
152 152  
153 153  
... ... @@ -210,7 +210,9 @@
210 210  [[image:image-20220607170442-2.png]]
211 211  
212 212  
215 +(((
213 213  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
217 +)))
214 214  
215 215  [[image:1654592697690-910.png]]
216 216  
... ... @@ -218,26 +218,30 @@
218 218  
219 219  == 2.3 ​Uplink Payload ==
220 220  
225 +(((
221 221  LSPH01 will uplink payload via LoRaWAN with below payload format: 
227 +)))
222 222  
229 +(((
223 223  Uplink payload includes in total 11 bytes.
231 +)))
224 224  
233 +(((
225 225  Normal uplink payload:
235 +)))
226 226  
227 227  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
228 -|(((
229 -**Size**
238 +|=(% style="width: 62.5px;" %)(((
239 +**Size (bytes)**
240 +)))|=(% style="width: 62.5px;" %)**2**|=(% style="width: 62.5px;" %)**2**|=**2**|=**2**|=**1**|=**1**|=**1**
241 +|(% style="width:62.5px" %)**Value**|(% style="width:62.5px" %)[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(% style="width:62.5px" %)(((
242 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
230 230  
231 -**(bytes)**
232 -)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
233 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
234 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
235 -
236 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
237 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
238 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
244 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
245 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
246 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
239 239  )))|Reserve|(((
240 -[[Message Type>>path:#H2.3.6MessageType]]
248 +[[Message Type>>||anchor="H2.3.6MessageType"]]
241 241  )))
242 242  
243 243  [[image:1654592721645-318.png]]
... ... @@ -293,7 +293,7 @@
293 293  
294 294  === 2.3.5 Interrupt Pin ===
295 295  
296 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
304 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
297 297  
298 298  
299 299  **Example:**
... ... @@ -306,19 +306,21 @@
306 306  
307 307  === 2.3.6 Message Type ===
308 308  
317 +(((
309 309  For a normal uplink payload, the message type is always 0x01.
319 +)))
310 310  
321 +(((
311 311  Valid Message Type:
323 +)))
312 312  
313 313  
314 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
315 -|**Message Type Code**|**Description**|**Payload**
316 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
317 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
318 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
326 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:499px" %)
327 +|=(% style="width: 160px;" %)**Message Type Code**|=(% style="width: 163px;" %)**Description**|=(% style="width: 173px;" %)**Payload**
328 +|(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
329 +|(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
330 +|(% style="width:160px" %)0x03|(% style="width:163px" %)Reply Calibration Info|(% style="width:173px" %)[[Calibration Payload>>||anchor="H2.7Calibration"]]
319 319  
320 -
321 -
322 322  === 2.3.7 Decode payload in The Things Network ===
323 323  
324 324  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -338,18 +338,27 @@
338 338  
339 339  == 2.4 Uplink Interval ==
340 340  
341 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
351 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
342 342  
343 343  
344 344  
345 345  == 2.5 ​Show Data in DataCake IoT Server ==
346 346  
357 +(((
347 347  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
359 +)))
348 348  
361 +(((
362 +
363 +)))
349 349  
365 +(((
350 350  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
367 +)))
351 351  
369 +(((
352 352  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
371 +)))
353 353  
354 354  
355 355  [[image:1654592790040-760.png]]
... ... @@ -372,9 +372,13 @@
372 372  [[image:1654592856403-259.png]]
373 373  
374 374  
394 +(((
375 375  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
396 +)))
376 376  
398 +(((
377 377  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
400 +)))
378 378  
379 379  
380 380  [[image:1654592878525-845.png]]
... ... @@ -397,8 +397,10 @@
397 397  === 2.6.1 Before measurement ===
398 398  
399 399  (((
423 +(((
400 400  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
401 401  )))
426 +)))
402 402  
403 403  
404 404  
... ... @@ -405,24 +405,45 @@
405 405  === 2.6.2 Measurement ===
406 406  
407 407  
433 +(((
408 408  (% style="color:#4f81bd" %)**Measurement the soil surface:**
435 +)))
409 409  
437 +(((
410 410  [[image:1654592946732-634.png]]
439 +)))
411 411  
441 +(((
412 412  Choose the proper measuring position. Split the surface soil according to the measured deep.
443 +)))
413 413  
445 +(((
414 414  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
447 +)))
415 415  
449 +(((
416 416  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
451 +)))
417 417  
453 +(((
418 418  Put soil over the probe after insert. And start to measure.
455 +)))
419 419  
457 +(((
458 +
459 +)))
420 420  
461 +(((
421 421  (% style="color:#4f81bd" %)**Measurement inside soil:**
463 +)))
422 422  
465 +(((
423 423  Dig a hole with diameter > 20CM.
467 +)))
424 424  
469 +(((
425 425  Insert the probe inside, method like measure the surface.
471 +)))
426 426  
427 427  
428 428  
... ... @@ -452,9 +452,13 @@
452 452  
453 453  == 2.7 Calibration ==
454 454  
501 +(((
455 455  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
503 +)))
456 456  
505 +(((
457 457  After stable, user can use below command to calibrate.
507 +)))
458 458  
459 459  [[image:image-20220607171149-4.png]]
460 460  
... ... @@ -461,12 +461,10 @@
461 461  
462 462  (% style="color:#037691" %)**Calibration Payload**
463 463  
464 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
465 -|(((
466 -**Size**
467 -
468 -**(bytes)**
469 -)))|**1**|**1**|**1**|**7**|**1**
514 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
515 +|=(% style="width: 62.5px;" %)(((
516 +**Size (bytes)**
517 +)))|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**1**|=(% style="width: 89px;" %)**7**|=(% style="width: 89px;" %)**1**
470 470  |**Value**|(((
471 471  PH4
472 472  
... ... @@ -476,12 +476,11 @@
476 476  
477 477  Calibrate value
478 478  )))|Reserve|(((
479 -[[Message Type>>path:#H2.3.6MessageType]]
527 +[[Message Type>>||anchor="H2.3.6MessageType"]]
480 480  
481 481  Always 0x03
482 482  )))
483 483  
484 -
485 485  User can also send 0x14 downlink command to poll the current calibration payload.
486 486  
487 487  [[image:image-20220607171416-7.jpeg]]
... ... @@ -490,8 +490,6 @@
490 490  * Reply to the confirmation package: 14 01
491 491  * Reply to non-confirmed packet: 14 00
492 492  
493 -
494 -
495 495  == 2.8 Frequency Plans ==
496 496  
497 497  (((
... ... @@ -501,32 +501,61 @@
501 501  
502 502  === 2.8.1 EU863-870 (EU868) ===
503 503  
549 +(((
504 504  (% style="color:blue" %)**Uplink:**
551 +)))
505 505  
553 +(((
506 506  868.1 - SF7BW125 to SF12BW125
555 +)))
507 507  
557 +(((
508 508  868.3 - SF7BW125 to SF12BW125 and SF7BW250
559 +)))
509 509  
561 +(((
510 510  868.5 - SF7BW125 to SF12BW125
563 +)))
511 511  
565 +(((
512 512  867.1 - SF7BW125 to SF12BW125
567 +)))
513 513  
569 +(((
514 514  867.3 - SF7BW125 to SF12BW125
571 +)))
515 515  
573 +(((
516 516  867.5 - SF7BW125 to SF12BW125
575 +)))
517 517  
577 +(((
518 518  867.7 - SF7BW125 to SF12BW125
579 +)))
519 519  
581 +(((
520 520  867.9 - SF7BW125 to SF12BW125
583 +)))
521 521  
585 +(((
522 522  868.8 - FSK
587 +)))
523 523  
589 +(((
590 +
591 +)))
524 524  
593 +(((
525 525  (% style="color:blue" %)**Downlink:**
595 +)))
526 526  
597 +(((
527 527  Uplink channels 1-9 (RX1)
599 +)))
528 528  
601 +(((
529 529  869.525 - SF9BW125 (RX2 downlink only)
603 +)))
530 530  
531 531  
532 532  
... ... @@ -547,51 +547,91 @@
547 547  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
548 548  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
549 549  
550 -
551 -
552 -
553 553  === 2.8.3 CN470-510 (CN470) ===
554 554  
626 +(((
555 555  Used in China, Default use CHE=1
628 +)))
556 556  
630 +(((
557 557  (% style="color:blue" %)**Uplink:**
632 +)))
558 558  
634 +(((
559 559  486.3 - SF7BW125 to SF12BW125
636 +)))
560 560  
638 +(((
561 561  486.5 - SF7BW125 to SF12BW125
640 +)))
562 562  
642 +(((
563 563  486.7 - SF7BW125 to SF12BW125
644 +)))
564 564  
646 +(((
565 565  486.9 - SF7BW125 to SF12BW125
648 +)))
566 566  
650 +(((
567 567  487.1 - SF7BW125 to SF12BW125
652 +)))
568 568  
654 +(((
569 569  487.3 - SF7BW125 to SF12BW125
656 +)))
570 570  
658 +(((
571 571  487.5 - SF7BW125 to SF12BW125
660 +)))
572 572  
662 +(((
573 573  487.7 - SF7BW125 to SF12BW125
664 +)))
574 574  
666 +(((
667 +
668 +)))
575 575  
670 +(((
576 576  (% style="color:blue" %)**Downlink:**
672 +)))
577 577  
674 +(((
578 578  506.7 - SF7BW125 to SF12BW125
676 +)))
579 579  
678 +(((
580 580  506.9 - SF7BW125 to SF12BW125
680 +)))
581 581  
682 +(((
582 582  507.1 - SF7BW125 to SF12BW125
684 +)))
583 583  
686 +(((
584 584  507.3 - SF7BW125 to SF12BW125
688 +)))
585 585  
690 +(((
586 586  507.5 - SF7BW125 to SF12BW125
692 +)))
587 587  
694 +(((
588 588  507.7 - SF7BW125 to SF12BW125
696 +)))
589 589  
698 +(((
590 590  507.9 - SF7BW125 to SF12BW125
700 +)))
591 591  
702 +(((
592 592  508.1 - SF7BW125 to SF12BW125
704 +)))
593 593  
706 +(((
594 594  505.3 - SF12BW125 (RX2 downlink only)
708 +)))
595 595  
596 596  
597 597  
... ... @@ -616,110 +616,222 @@
616 616  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
617 617  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
618 618  
733 +
734 +
735 +
619 619  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
620 620  
738 +(((
621 621  (% style="color:blue" %)**Default Uplink channel:**
740 +)))
622 622  
742 +(((
623 623  923.2 - SF7BW125 to SF10BW125
744 +)))
624 624  
746 +(((
625 625  923.4 - SF7BW125 to SF10BW125
748 +)))
626 626  
750 +(((
751 +
752 +)))
627 627  
754 +(((
628 628  (% style="color:blue" %)**Additional Uplink Channel**:
756 +)))
629 629  
758 +(((
630 630  (OTAA mode, channel added by JoinAccept message)
760 +)))
631 631  
762 +(((
763 +
764 +)))
632 632  
766 +(((
633 633  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
768 +)))
634 634  
770 +(((
635 635  922.2 - SF7BW125 to SF10BW125
772 +)))
636 636  
774 +(((
637 637  922.4 - SF7BW125 to SF10BW125
776 +)))
638 638  
778 +(((
639 639  922.6 - SF7BW125 to SF10BW125
780 +)))
640 640  
782 +(((
641 641  922.8 - SF7BW125 to SF10BW125
784 +)))
642 642  
786 +(((
643 643  923.0 - SF7BW125 to SF10BW125
788 +)))
644 644  
790 +(((
645 645  922.0 - SF7BW125 to SF10BW125
792 +)))
646 646  
794 +(((
795 +
796 +)))
647 647  
798 +(((
648 648  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
800 +)))
649 649  
802 +(((
650 650  923.6 - SF7BW125 to SF10BW125
804 +)))
651 651  
806 +(((
652 652  923.8 - SF7BW125 to SF10BW125
808 +)))
653 653  
810 +(((
654 654  924.0 - SF7BW125 to SF10BW125
812 +)))
655 655  
814 +(((
656 656  924.2 - SF7BW125 to SF10BW125
816 +)))
657 657  
818 +(((
658 658  924.4 - SF7BW125 to SF10BW125
820 +)))
659 659  
822 +(((
660 660  924.6 - SF7BW125 to SF10BW125
824 +)))
661 661  
826 +(((
827 +
828 +)))
662 662  
830 +(((
663 663  (% style="color:blue" %)**Downlink:**
832 +)))
664 664  
834 +(((
665 665  Uplink channels 1-8 (RX1)
836 +)))
666 666  
838 +(((
667 667  923.2 - SF10BW125 (RX2)
840 +)))
668 668  
669 669  
670 670  
671 671  === 2.8.6 KR920-923 (KR920) ===
672 672  
846 +(((
673 673  (% style="color:blue" %)**Default channel:**
848 +)))
674 674  
850 +(((
675 675  922.1 - SF7BW125 to SF12BW125
852 +)))
676 676  
854 +(((
677 677  922.3 - SF7BW125 to SF12BW125
856 +)))
678 678  
858 +(((
679 679  922.5 - SF7BW125 to SF12BW125
860 +)))
680 680  
862 +(((
863 +
864 +)))
681 681  
866 +(((
682 682  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
868 +)))
683 683  
870 +(((
684 684  922.1 - SF7BW125 to SF12BW125
872 +)))
685 685  
874 +(((
686 686  922.3 - SF7BW125 to SF12BW125
876 +)))
687 687  
878 +(((
688 688  922.5 - SF7BW125 to SF12BW125
880 +)))
689 689  
882 +(((
690 690  922.7 - SF7BW125 to SF12BW125
884 +)))
691 691  
886 +(((
692 692  922.9 - SF7BW125 to SF12BW125
888 +)))
693 693  
890 +(((
694 694  923.1 - SF7BW125 to SF12BW125
892 +)))
695 695  
894 +(((
696 696  923.3 - SF7BW125 to SF12BW125
896 +)))
697 697  
898 +(((
899 +
900 +)))
698 698  
902 +(((
699 699  (% style="color:blue" %)**Downlink:**
904 +)))
700 700  
906 +(((
701 701  Uplink channels 1-7(RX1)
908 +)))
702 702  
910 +(((
703 703  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
912 +)))
704 704  
705 705  
706 706  
707 707  === 2.8.7 IN865-867 (IN865) ===
708 708  
918 +(((
709 709  (% style="color:blue" %)**Uplink:**
920 +)))
710 710  
922 +(((
711 711  865.0625 - SF7BW125 to SF12BW125
924 +)))
712 712  
926 +(((
713 713  865.4025 - SF7BW125 to SF12BW125
928 +)))
714 714  
930 +(((
715 715  865.9850 - SF7BW125 to SF12BW125
932 +)))
716 716  
934 +(((
935 +
936 +)))
717 717  
938 +(((
718 718  (% style="color:blue" %)**Downlink:**
940 +)))
719 719  
942 +(((
720 720  Uplink channels 1-3 (RX1)
944 +)))
721 721  
946 +(((
722 722  866.550 - SF10BW125 (RX2)
948 +)))
723 723  
724 724  
725 725  
... ... @@ -730,6 +730,9 @@
730 730  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
731 731  * Blink once when device transmit a packet.
732 732  
959 +
960 +
961 +
733 733  == 2.10 ​Firmware Change Log ==
734 734  
735 735  
... ... @@ -744,26 +744,51 @@
744 744  
745 745  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
746 746  
976 +(((
747 747  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
978 +)))
748 748  
749 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
750 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
980 +* (((
981 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
982 +)))
983 +* (((
984 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
985 +)))
751 751  
987 +(((
752 752  There are two kinds of commands to configure LSPH01, they are:
989 +)))
753 753  
754 -* (% style="color:#4f81bd" %)** General Commands**.
991 +* (((
992 +(% style="color:#4f81bd" %)** General Commands**.
993 +)))
755 755  
995 +(((
756 756  These commands are to configure:
997 +)))
757 757  
758 -* General system settings like: uplink interval.
759 -* LoRaWAN protocol & radio related command.
999 +* (((
1000 +General system settings like: uplink interval.
1001 +)))
1002 +* (((
1003 +LoRaWAN protocol & radio related command.
1004 +)))
760 760  
1006 +(((
761 761  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
1008 +)))
762 762  
1010 +(((
1011 +
1012 +)))
763 763  
764 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
1014 +* (((
1015 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
1016 +)))
765 765  
1018 +(((
766 766  These commands only valid for LSPH01, as below:
1020 +)))
767 767  
768 768  
769 769  
... ... @@ -773,30 +773,31 @@
773 773  
774 774  (% style="color:#037691" %)**AT Command: AT+TDC**
775 775  
1030 +[[image:image-20220607171554-8.png]]
776 776  
777 -(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:710px" %)
778 -|(% style="width:154px" %)**Command Example**|(% style="width:223px" %)**Function**|(% style="width:330px" %)**Response**
779 -|(% style="width:154px" %)AT+TDC=?|(% style="width:223px" %)Show current transmit Interval|(% style="width:330px" %)(((
780 -30000
781 781  
782 -OK
783 783  
784 -the interval is 30000ms = 30s
1034 +(((
1035 +(% style="color:#037691" %)**Downlink Command: 0x01**
785 785  )))
786 -|(% style="width:154px" %)AT+TDC=60000|(% style="width:223px" %)Set Transmit Interval|(% style="width:330px" %)(((
787 -OK
788 788  
789 -Set transmit interval to 60000ms = 60 seconds
1038 +(((
1039 +Format: Command Code (0x01) followed by 3 bytes time value.
790 790  )))
791 791  
792 -(% style="color:#037691" %)**Downlink Command: 0x01**
1042 +(((
1043 +If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1044 +)))
793 793  
794 -Format: Command Code (0x01) followed by 3 bytes time value.
1046 +* (((
1047 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1048 +)))
1049 +* (((
1050 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
795 795  
796 -If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
797 797  
798 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
799 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1053 +
1054 +)))
800 800  
801 801  == 3.2 Set Interrupt Mode ==
802 802  
... ... @@ -804,21 +804,37 @@
804 804  
805 805  (% style="color:#037691" %)**AT Command: AT+INTMOD**
806 806  
807 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607153759-6.png?rev=1.1||alt="image-20220607153759-6.png"]]
1062 +[[image:image-20220607171716-9.png]]
808 808  
809 809  
1065 +(((
810 810  (% style="color:#037691" %)**Downlink Command: 0x06**
1067 +)))
811 811  
1069 +(((
812 812  Format: Command Code (0x06) followed by 3 bytes.
1071 +)))
813 813  
1073 +(((
814 814  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1075 +)))
815 815  
816 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
817 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1077 +* (((
1078 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1079 +)))
1080 +* (((
1081 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1082 +)))
818 818  
1084 +(((
1085 +
1086 +)))
1087 +
1088 +
1089 +
819 819  == 3.3 Calibrate Sensor ==
820 820  
821 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1092 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
822 822  
823 823  
824 824  
... ... @@ -828,7 +828,7 @@
828 828  
829 829  (% style="color:#037691" %)**Downlink Command: 0x26**
830 830  
831 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607154718-7.png?rev=1.1||alt="image-20220607154718-7.png"]]
1102 +[[image:image-20220607171917-10.png]]
832 832  
833 833  * Reply to the confirmation package: 26 01
834 834  * Reply to non-confirmed packet: 26 00
... ... @@ -850,7 +850,7 @@
850 850  
851 851  Version
852 852  )))|Sensor Type|Reserve|(((
853 -[[Message Type>>path:#H2.3.6MessageType]]
1124 +[[Message Type>>||anchor="H2.3.6MessageType"]]
854 854  Always 0x02
855 855  )))
856 856  
... ... @@ -916,7 +916,7 @@
916 916  The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
917 917  )))
918 918  
919 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654588469844-778.png?rev=1.1||alt="1654588469844-778.png"]]
1190 +[[image:1654593587246-335.png]]
920 920  
921 921  
922 922  Minimum Working Voltage for the LSPH01:
... ... @@ -961,7 +961,7 @@
961 961  
962 962  And the Life expectation in difference case will be shown on the right.
963 963  
964 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654588577573-122.png?rev=1.1||alt="1654588577573-122.png"]]
1235 +[[image:1654593605679-189.png]]
965 965  
966 966  
967 967  The battery related documents as below:
... ... @@ -976,7 +976,7 @@
976 976  [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
977 977  )))
978 978  
979 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607155856-8.png?rev=1.1||alt="image-20220607155856-8.png"]]
1250 +[[image:image-20220607172042-11.png]]
980 980  
981 981  
982 982  
... ... @@ -990,9 +990,13 @@
990 990  
991 991  === ​4.3.2 Replace the battery ===
992 992  
1264 +(((
993 993  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1266 +)))
994 994  
1268 +(((
995 995  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1270 +)))
996 996  
997 997  
998 998  
... ... @@ -1002,7 +1002,7 @@
1002 1002  
1003 1003  LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.
1004 1004  
1005 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654589001411-343.png?rev=1.1||alt="1654589001411-343.png"]]
1280 +[[image:1654593668970-604.png]]
1006 1006  
1007 1007  **Connection:**
1008 1008  
... ... @@ -1013,24 +1013,24 @@
1013 1013  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1014 1014  
1015 1015  
1291 +(((
1016 1016  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1293 +)))
1017 1017  
1018 1018  
1019 - [[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654589062541-567.png?rev=1.1||alt="1654589062541-567.png"]]
1296 + [[image:1654593712276-618.png]]
1020 1020  
1021 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1298 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1022 1022  
1023 1023  
1024 -
1025 1025  = 6. FAQ =
1026 1026  
1027 1027  == 6.1 How to change the LoRa Frequency Bands/Region ==
1028 1028  
1029 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1305 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1030 1030  When downloading the images, choose the required image file for download. ​
1031 1031  
1032 1032  
1033 -
1034 1034  = 7. Trouble Shooting =
1035 1035  
1036 1036  == 7.1 AT Commands input doesn’t work ==
... ... @@ -1055,6 +1055,7 @@
1055 1055  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1056 1056  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1057 1057  
1333 +
1058 1058  = 9. ​Packing Info =
1059 1059  
1060 1060  
... ... @@ -1069,6 +1069,7 @@
1069 1069  * Package Size / pcs : cm
1070 1070  * Weight / pcs : g
1071 1071  
1348 +
1072 1072  = 10. ​Support =
1073 1073  
1074 1074  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1654593587246-335.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +75.8 KB
Content
1654593605679-189.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +138.2 KB
Content
1654593668970-604.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +546.2 KB
Content
1654593712276-618.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +144.0 KB
Content
image-20220607171554-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.7 KB
Content
image-20220607171716-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +17.9 KB
Content
image-20220607171917-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +6.2 KB
Content
image-20220607172042-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +83.7 KB
Content