Last modified by Xiaoling on 2025/04/24 17:18
<
From version < 64.4 >
edited by Xiaoling
on 2022/06/07 17:14
To version < 81.2 >
edited by Xiaoling
on 2022/06/07 18:05
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -66,23 +66,29 @@
66 66  
67 67  
68 68  
69 -
70 -
71 -
72 -
73 73  = 1. Introduction =
74 74  
75 75  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
76 76  
73 +(((
77 77  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
75 +)))
78 78  
77 +(((
79 79  LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
79 +)))
80 80  
81 +(((
81 81  The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
83 +)))
82 82  
85 +(((
83 83  LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
87 +)))
84 84  
89 +(((
85 85  Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
91 +)))
86 86  
87 87  
88 88  [[image:1654592435432-887.png]]
... ... @@ -210,7 +210,9 @@
210 210  [[image:image-20220607170442-2.png]]
211 211  
212 212  
219 +(((
213 213  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
221 +)))
214 214  
215 215  [[image:1654592697690-910.png]]
216 216  
... ... @@ -218,11 +218,17 @@
218 218  
219 219  == 2.3 ​Uplink Payload ==
220 220  
229 +(((
221 221  LSPH01 will uplink payload via LoRaWAN with below payload format: 
231 +)))
222 222  
233 +(((
223 223  Uplink payload includes in total 11 bytes.
235 +)))
224 224  
237 +(((
225 225  Normal uplink payload:
239 +)))
226 226  
227 227  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
228 228  |(((
... ... @@ -306,19 +306,22 @@
306 306  
307 307  === 2.3.6 Message Type ===
308 308  
323 +(((
309 309  For a normal uplink payload, the message type is always 0x01.
325 +)))
310 310  
327 +(((
311 311  Valid Message Type:
329 +)))
312 312  
313 313  
314 314  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
315 -|**Message Type Code**|**Description**|**Payload**
333 +|=**Message Type Code**|=**Description**|=**Payload**
316 316  |0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
317 317  |0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
318 318  |0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
319 319  
320 320  
321 -
322 322  === 2.3.7 Decode payload in The Things Network ===
323 323  
324 324  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -344,12 +344,21 @@
344 344  
345 345  == 2.5 ​Show Data in DataCake IoT Server ==
346 346  
364 +(((
347 347  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
366 +)))
348 348  
368 +(((
369 +
370 +)))
349 349  
372 +(((
350 350  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
374 +)))
351 351  
376 +(((
352 352  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
378 +)))
353 353  
354 354  
355 355  [[image:1654592790040-760.png]]
... ... @@ -372,9 +372,13 @@
372 372  [[image:1654592856403-259.png]]
373 373  
374 374  
401 +(((
375 375  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
403 +)))
376 376  
405 +(((
377 377  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
407 +)))
378 378  
379 379  
380 380  [[image:1654592878525-845.png]]
... ... @@ -397,8 +397,10 @@
397 397  === 2.6.1 Before measurement ===
398 398  
399 399  (((
430 +(((
400 400  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
401 401  )))
433 +)))
402 402  
403 403  
404 404  
... ... @@ -405,24 +405,45 @@
405 405  === 2.6.2 Measurement ===
406 406  
407 407  
440 +(((
408 408  (% style="color:#4f81bd" %)**Measurement the soil surface:**
442 +)))
409 409  
444 +(((
410 410  [[image:1654592946732-634.png]]
446 +)))
411 411  
448 +(((
412 412  Choose the proper measuring position. Split the surface soil according to the measured deep.
450 +)))
413 413  
452 +(((
414 414  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
454 +)))
415 415  
456 +(((
416 416  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
458 +)))
417 417  
460 +(((
418 418  Put soil over the probe after insert. And start to measure.
462 +)))
419 419  
464 +(((
465 +
466 +)))
420 420  
468 +(((
421 421  (% style="color:#4f81bd" %)**Measurement inside soil:**
470 +)))
422 422  
472 +(((
423 423  Dig a hole with diameter > 20CM.
474 +)))
424 424  
476 +(((
425 425  Insert the probe inside, method like measure the surface.
478 +)))
426 426  
427 427  
428 428  
... ... @@ -452,9 +452,13 @@
452 452  
453 453  == 2.7 Calibration ==
454 454  
508 +(((
455 455  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
510 +)))
456 456  
512 +(((
457 457  After stable, user can use below command to calibrate.
514 +)))
458 458  
459 459  [[image:image-20220607171149-4.png]]
460 460  
... ... @@ -461,7 +461,7 @@
461 461  
462 462  (% style="color:#037691" %)**Calibration Payload**
463 463  
464 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
521 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
465 465  |(((
466 466  **Size**
467 467  
... ... @@ -481,7 +481,6 @@
481 481  Always 0x03
482 482  )))
483 483  
484 -
485 485  User can also send 0x14 downlink command to poll the current calibration payload.
486 486  
487 487  [[image:image-20220607171416-7.jpeg]]
... ... @@ -491,7 +491,6 @@
491 491  * Reply to non-confirmed packet: 14 00
492 492  
493 493  
494 -
495 495  == 2.8 Frequency Plans ==
496 496  
497 497  (((
... ... @@ -501,32 +501,61 @@
501 501  
502 502  === 2.8.1 EU863-870 (EU868) ===
503 503  
559 +(((
504 504  (% style="color:blue" %)**Uplink:**
561 +)))
505 505  
563 +(((
506 506  868.1 - SF7BW125 to SF12BW125
565 +)))
507 507  
567 +(((
508 508  868.3 - SF7BW125 to SF12BW125 and SF7BW250
569 +)))
509 509  
571 +(((
510 510  868.5 - SF7BW125 to SF12BW125
573 +)))
511 511  
575 +(((
512 512  867.1 - SF7BW125 to SF12BW125
577 +)))
513 513  
579 +(((
514 514  867.3 - SF7BW125 to SF12BW125
581 +)))
515 515  
583 +(((
516 516  867.5 - SF7BW125 to SF12BW125
585 +)))
517 517  
587 +(((
518 518  867.7 - SF7BW125 to SF12BW125
589 +)))
519 519  
591 +(((
520 520  867.9 - SF7BW125 to SF12BW125
593 +)))
521 521  
595 +(((
522 522  868.8 - FSK
597 +)))
523 523  
599 +(((
600 +
601 +)))
524 524  
603 +(((
525 525  (% style="color:blue" %)**Downlink:**
605 +)))
526 526  
607 +(((
527 527  Uplink channels 1-9 (RX1)
609 +)))
528 528  
611 +(((
529 529  869.525 - SF9BW125 (RX2 downlink only)
613 +)))
530 530  
531 531  
532 532  
... ... @@ -548,50 +548,91 @@
548 548  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
549 549  
550 550  
551 -
552 -
553 553  === 2.8.3 CN470-510 (CN470) ===
554 554  
637 +(((
555 555  Used in China, Default use CHE=1
639 +)))
556 556  
641 +(((
557 557  (% style="color:blue" %)**Uplink:**
643 +)))
558 558  
645 +(((
559 559  486.3 - SF7BW125 to SF12BW125
647 +)))
560 560  
649 +(((
561 561  486.5 - SF7BW125 to SF12BW125
651 +)))
562 562  
653 +(((
563 563  486.7 - SF7BW125 to SF12BW125
655 +)))
564 564  
657 +(((
565 565  486.9 - SF7BW125 to SF12BW125
659 +)))
566 566  
661 +(((
567 567  487.1 - SF7BW125 to SF12BW125
663 +)))
568 568  
665 +(((
569 569  487.3 - SF7BW125 to SF12BW125
667 +)))
570 570  
669 +(((
571 571  487.5 - SF7BW125 to SF12BW125
671 +)))
572 572  
673 +(((
573 573  487.7 - SF7BW125 to SF12BW125
675 +)))
574 574  
677 +(((
678 +
679 +)))
575 575  
681 +(((
576 576  (% style="color:blue" %)**Downlink:**
683 +)))
577 577  
685 +(((
578 578  506.7 - SF7BW125 to SF12BW125
687 +)))
579 579  
689 +(((
580 580  506.9 - SF7BW125 to SF12BW125
691 +)))
581 581  
693 +(((
582 582  507.1 - SF7BW125 to SF12BW125
695 +)))
583 583  
697 +(((
584 584  507.3 - SF7BW125 to SF12BW125
699 +)))
585 585  
701 +(((
586 586  507.5 - SF7BW125 to SF12BW125
703 +)))
587 587  
705 +(((
588 588  507.7 - SF7BW125 to SF12BW125
707 +)))
589 589  
709 +(((
590 590  507.9 - SF7BW125 to SF12BW125
711 +)))
591 591  
713 +(((
592 592  508.1 - SF7BW125 to SF12BW125
715 +)))
593 593  
717 +(((
594 594  505.3 - SF12BW125 (RX2 downlink only)
719 +)))
595 595  
596 596  
597 597  
... ... @@ -616,110 +616,220 @@
616 616  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
617 617  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
618 618  
744 +
619 619  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
620 620  
747 +(((
621 621  (% style="color:blue" %)**Default Uplink channel:**
749 +)))
622 622  
751 +(((
623 623  923.2 - SF7BW125 to SF10BW125
753 +)))
624 624  
755 +(((
625 625  923.4 - SF7BW125 to SF10BW125
757 +)))
626 626  
759 +(((
760 +
761 +)))
627 627  
763 +(((
628 628  (% style="color:blue" %)**Additional Uplink Channel**:
765 +)))
629 629  
767 +(((
630 630  (OTAA mode, channel added by JoinAccept message)
769 +)))
631 631  
771 +(((
772 +
773 +)))
632 632  
775 +(((
633 633  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
777 +)))
634 634  
779 +(((
635 635  922.2 - SF7BW125 to SF10BW125
781 +)))
636 636  
783 +(((
637 637  922.4 - SF7BW125 to SF10BW125
785 +)))
638 638  
787 +(((
639 639  922.6 - SF7BW125 to SF10BW125
789 +)))
640 640  
791 +(((
641 641  922.8 - SF7BW125 to SF10BW125
793 +)))
642 642  
795 +(((
643 643  923.0 - SF7BW125 to SF10BW125
797 +)))
644 644  
799 +(((
645 645  922.0 - SF7BW125 to SF10BW125
801 +)))
646 646  
803 +(((
804 +
805 +)))
647 647  
807 +(((
648 648  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
809 +)))
649 649  
811 +(((
650 650  923.6 - SF7BW125 to SF10BW125
813 +)))
651 651  
815 +(((
652 652  923.8 - SF7BW125 to SF10BW125
817 +)))
653 653  
819 +(((
654 654  924.0 - SF7BW125 to SF10BW125
821 +)))
655 655  
823 +(((
656 656  924.2 - SF7BW125 to SF10BW125
825 +)))
657 657  
827 +(((
658 658  924.4 - SF7BW125 to SF10BW125
829 +)))
659 659  
831 +(((
660 660  924.6 - SF7BW125 to SF10BW125
833 +)))
661 661  
835 +(((
836 +
837 +)))
662 662  
839 +(((
663 663  (% style="color:blue" %)**Downlink:**
841 +)))
664 664  
843 +(((
665 665  Uplink channels 1-8 (RX1)
845 +)))
666 666  
847 +(((
667 667  923.2 - SF10BW125 (RX2)
849 +)))
668 668  
669 669  
670 670  
671 671  === 2.8.6 KR920-923 (KR920) ===
672 672  
855 +(((
673 673  (% style="color:blue" %)**Default channel:**
857 +)))
674 674  
859 +(((
675 675  922.1 - SF7BW125 to SF12BW125
861 +)))
676 676  
863 +(((
677 677  922.3 - SF7BW125 to SF12BW125
865 +)))
678 678  
867 +(((
679 679  922.5 - SF7BW125 to SF12BW125
869 +)))
680 680  
871 +(((
872 +
873 +)))
681 681  
875 +(((
682 682  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
877 +)))
683 683  
879 +(((
684 684  922.1 - SF7BW125 to SF12BW125
881 +)))
685 685  
883 +(((
686 686  922.3 - SF7BW125 to SF12BW125
885 +)))
687 687  
887 +(((
688 688  922.5 - SF7BW125 to SF12BW125
889 +)))
689 689  
891 +(((
690 690  922.7 - SF7BW125 to SF12BW125
893 +)))
691 691  
895 +(((
692 692  922.9 - SF7BW125 to SF12BW125
897 +)))
693 693  
899 +(((
694 694  923.1 - SF7BW125 to SF12BW125
901 +)))
695 695  
903 +(((
696 696  923.3 - SF7BW125 to SF12BW125
905 +)))
697 697  
907 +(((
908 +
909 +)))
698 698  
911 +(((
699 699  (% style="color:blue" %)**Downlink:**
913 +)))
700 700  
915 +(((
701 701  Uplink channels 1-7(RX1)
917 +)))
702 702  
919 +(((
703 703  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
921 +)))
704 704  
705 705  
706 706  
707 707  === 2.8.7 IN865-867 (IN865) ===
708 708  
927 +(((
709 709  (% style="color:blue" %)**Uplink:**
929 +)))
710 710  
931 +(((
711 711  865.0625 - SF7BW125 to SF12BW125
933 +)))
712 712  
935 +(((
713 713  865.4025 - SF7BW125 to SF12BW125
937 +)))
714 714  
939 +(((
715 715  865.9850 - SF7BW125 to SF12BW125
941 +)))
716 716  
943 +(((
944 +
945 +)))
717 717  
947 +(((
718 718  (% style="color:blue" %)**Downlink:**
949 +)))
719 719  
951 +(((
720 720  Uplink channels 1-3 (RX1)
953 +)))
721 721  
955 +(((
722 722  866.550 - SF10BW125 (RX2)
957 +)))
723 723  
724 724  
725 725  
... ... @@ -730,6 +730,9 @@
730 730  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
731 731  * Blink once when device transmit a packet.
732 732  
968 +
969 +
970 +
733 733  == 2.10 ​Firmware Change Log ==
734 734  
735 735  
... ... @@ -744,26 +744,51 @@
744 744  
745 745  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
746 746  
985 +(((
747 747  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
987 +)))
748 748  
749 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
750 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
989 +* (((
990 +AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
991 +)))
992 +* (((
993 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
994 +)))
751 751  
996 +(((
752 752  There are two kinds of commands to configure LSPH01, they are:
998 +)))
753 753  
754 -* (% style="color:#4f81bd" %)** General Commands**.
1000 +* (((
1001 +(% style="color:#4f81bd" %)** General Commands**.
1002 +)))
755 755  
1004 +(((
756 756  These commands are to configure:
1006 +)))
757 757  
758 -* General system settings like: uplink interval.
759 -* LoRaWAN protocol & radio related command.
1008 +* (((
1009 +General system settings like: uplink interval.
1010 +)))
1011 +* (((
1012 +LoRaWAN protocol & radio related command.
1013 +)))
760 760  
1015 +(((
761 761  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
1017 +)))
762 762  
1019 +(((
1020 +
1021 +)))
763 763  
764 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
1023 +* (((
1024 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
1025 +)))
765 765  
1027 +(((
766 766  These commands only valid for LSPH01, as below:
1029 +)))
767 767  
768 768  
769 769  
... ... @@ -773,30 +773,31 @@
773 773  
774 774  (% style="color:#037691" %)**AT Command: AT+TDC**
775 775  
1039 +[[image:image-20220607171554-8.png]]
776 776  
777 -(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:710px" %)
778 -|(% style="width:154px" %)**Command Example**|(% style="width:223px" %)**Function**|(% style="width:330px" %)**Response**
779 -|(% style="width:154px" %)AT+TDC=?|(% style="width:223px" %)Show current transmit Interval|(% style="width:330px" %)(((
780 -30000
781 781  
782 -OK
783 783  
784 -the interval is 30000ms = 30s
1043 +(((
1044 +(% style="color:#037691" %)**Downlink Command: 0x01**
785 785  )))
786 -|(% style="width:154px" %)AT+TDC=60000|(% style="width:223px" %)Set Transmit Interval|(% style="width:330px" %)(((
787 -OK
788 788  
789 -Set transmit interval to 60000ms = 60 seconds
1047 +(((
1048 +Format: Command Code (0x01) followed by 3 bytes time value.
790 790  )))
791 791  
792 -(% style="color:#037691" %)**Downlink Command: 0x01**
1051 +(((
1052 +If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1053 +)))
793 793  
794 -Format: Command Code (0x01) followed by 3 bytes time value.
1055 +* (((
1056 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1057 +)))
1058 +* (((
1059 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
795 795  
796 -If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
797 797  
798 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
799 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1062 +
1063 +)))
800 800  
801 801  == 3.2 Set Interrupt Mode ==
802 802  
... ... @@ -804,18 +804,34 @@
804 804  
805 805  (% style="color:#037691" %)**AT Command: AT+INTMOD**
806 806  
807 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607153759-6.png?rev=1.1||alt="image-20220607153759-6.png"]]
1071 +[[image:image-20220607171716-9.png]]
808 808  
809 809  
1074 +(((
810 810  (% style="color:#037691" %)**Downlink Command: 0x06**
1076 +)))
811 811  
1078 +(((
812 812  Format: Command Code (0x06) followed by 3 bytes.
1080 +)))
813 813  
1082 +(((
814 814  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1084 +)))
815 815  
816 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
817 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1086 +* (((
1087 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1088 +)))
1089 +* (((
1090 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1091 +)))
818 818  
1093 +(((
1094 +
1095 +)))
1096 +
1097 +
1098 +
819 819  == 3.3 Calibrate Sensor ==
820 820  
821 821  Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
... ... @@ -828,7 +828,7 @@
828 828  
829 829  (% style="color:#037691" %)**Downlink Command: 0x26**
830 830  
831 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607154718-7.png?rev=1.1||alt="image-20220607154718-7.png"]]
1111 +[[image:image-20220607171917-10.png]]
832 832  
833 833  * Reply to the confirmation package: 26 01
834 834  * Reply to non-confirmed packet: 26 00
... ... @@ -916,7 +916,7 @@
916 916  The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
917 917  )))
918 918  
919 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654588469844-778.png?rev=1.1||alt="1654588469844-778.png"]]
1199 +[[image:1654593587246-335.png]]
920 920  
921 921  
922 922  Minimum Working Voltage for the LSPH01:
... ... @@ -961,7 +961,7 @@
961 961  
962 962  And the Life expectation in difference case will be shown on the right.
963 963  
964 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654588577573-122.png?rev=1.1||alt="1654588577573-122.png"]]
1244 +[[image:1654593605679-189.png]]
965 965  
966 966  
967 967  The battery related documents as below:
... ... @@ -976,7 +976,7 @@
976 976  [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
977 977  )))
978 978  
979 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607155856-8.png?rev=1.1||alt="image-20220607155856-8.png"]]
1259 +[[image:image-20220607172042-11.png]]
980 980  
981 981  
982 982  
... ... @@ -990,9 +990,13 @@
990 990  
991 991  === ​4.3.2 Replace the battery ===
992 992  
1273 +(((
993 993  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1275 +)))
994 994  
1277 +(((
995 995  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1279 +)))
996 996  
997 997  
998 998  
... ... @@ -1002,7 +1002,7 @@
1002 1002  
1003 1003  LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.
1004 1004  
1005 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654589001411-343.png?rev=1.1||alt="1654589001411-343.png"]]
1289 +[[image:1654593668970-604.png]]
1006 1006  
1007 1007  **Connection:**
1008 1008  
... ... @@ -1013,10 +1013,12 @@
1013 1013  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1014 1014  
1015 1015  
1300 +(((
1016 1016  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1302 +)))
1017 1017  
1018 1018  
1019 - [[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654589062541-567.png?rev=1.1||alt="1654589062541-567.png"]]
1305 + [[image:1654593712276-618.png]]
1020 1020  
1021 1021  Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1022 1022  
1654593587246-335.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +75.8 KB
Content
1654593605679-189.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +138.2 KB
Content
1654593668970-604.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +546.2 KB
Content
1654593712276-618.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +144.0 KB
Content
image-20220607171554-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.7 KB
Content
image-20220607171716-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +17.9 KB
Content
image-20220607171917-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +6.2 KB
Content
image-20220607172042-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +83.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0