Last modified by Xiaoling on 2025/04/24 17:18
<
From version < 64.3 >
edited by Xiaoling
on 2022/06/07 17:14
To version < 79.6 >
edited by Xiaoling
on 2022/06/07 18:02
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -62,27 +62,29 @@
62 62  * [[10. ​Support>>path:#H10.A0200BSupport]]
63 63  
64 64  
65 -
66 -
67 -
68 -
69 -
70 -
71 -
72 -
73 73  = 1. Introduction =
74 74  
75 75  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
76 76  
69 +(((
77 77  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
71 +)))
78 78  
73 +(((
79 79  LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
75 +)))
80 80  
77 +(((
81 81  The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
79 +)))
82 82  
81 +(((
83 83  LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
83 +)))
84 84  
85 +(((
85 85  Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
87 +)))
86 86  
87 87  
88 88  [[image:1654592435432-887.png]]
... ... @@ -105,7 +105,6 @@
105 105  * IP68 rate for the Sensor Probe
106 106  * 8500mAh Battery for long term use
107 107  
108 -
109 109  == 1.3 Probe Specification ==
110 110  
111 111  
... ... @@ -127,11 +127,15 @@
127 127  * Length: 3.5 meters
128 128  
129 129  
131 +
132 +
130 130  == 1.4 ​Applications ==
131 131  
132 132  * Smart Agriculture
133 133  
134 134  
138 +
139 +
135 135  == 1.5 Pin mapping and power on ==
136 136  
137 137  [[image:1654592472094-134.png]]
... ... @@ -210,7 +210,9 @@
210 210  [[image:image-20220607170442-2.png]]
211 211  
212 212  
218 +(((
213 213  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
220 +)))
214 214  
215 215  [[image:1654592697690-910.png]]
216 216  
... ... @@ -218,11 +218,17 @@
218 218  
219 219  == 2.3 ​Uplink Payload ==
220 220  
228 +(((
221 221  LSPH01 will uplink payload via LoRaWAN with below payload format: 
230 +)))
222 222  
232 +(((
223 223  Uplink payload includes in total 11 bytes.
234 +)))
224 224  
236 +(((
225 225  Normal uplink payload:
238 +)))
226 226  
227 227  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
228 228  |(((
... ... @@ -306,13 +306,17 @@
306 306  
307 307  === 2.3.6 Message Type ===
308 308  
322 +(((
309 309  For a normal uplink payload, the message type is always 0x01.
324 +)))
310 310  
326 +(((
311 311  Valid Message Type:
328 +)))
312 312  
313 313  
314 314  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
315 -|**Message Type Code**|**Description**|**Payload**
332 +|=**Message Type Code**|=**Description**|=**Payload**
316 316  |0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
317 317  |0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
318 318  |0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
... ... @@ -319,6 +319,7 @@
319 319  
320 320  
321 321  
339 +
322 322  === 2.3.7 Decode payload in The Things Network ===
323 323  
324 324  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -344,12 +344,21 @@
344 344  
345 345  == 2.5 ​Show Data in DataCake IoT Server ==
346 346  
365 +(((
347 347  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
367 +)))
348 348  
369 +(((
370 +
371 +)))
349 349  
373 +(((
350 350  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
375 +)))
351 351  
377 +(((
352 352  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
379 +)))
353 353  
354 354  
355 355  [[image:1654592790040-760.png]]
... ... @@ -372,9 +372,13 @@
372 372  [[image:1654592856403-259.png]]
373 373  
374 374  
402 +(((
375 375  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
404 +)))
376 376  
406 +(((
377 377  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
408 +)))
378 378  
379 379  
380 380  [[image:1654592878525-845.png]]
... ... @@ -397,8 +397,10 @@
397 397  === 2.6.1 Before measurement ===
398 398  
399 399  (((
431 +(((
400 400  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
401 401  )))
434 +)))
402 402  
403 403  
404 404  
... ... @@ -405,24 +405,45 @@
405 405  === 2.6.2 Measurement ===
406 406  
407 407  
441 +(((
408 408  (% style="color:#4f81bd" %)**Measurement the soil surface:**
443 +)))
409 409  
445 +(((
410 410  [[image:1654592946732-634.png]]
447 +)))
411 411  
449 +(((
412 412  Choose the proper measuring position. Split the surface soil according to the measured deep.
451 +)))
413 413  
453 +(((
414 414  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
455 +)))
415 415  
457 +(((
416 416  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
459 +)))
417 417  
461 +(((
418 418  Put soil over the probe after insert. And start to measure.
463 +)))
419 419  
465 +(((
466 +
467 +)))
420 420  
469 +(((
421 421  (% style="color:#4f81bd" %)**Measurement inside soil:**
471 +)))
422 422  
473 +(((
423 423  Dig a hole with diameter > 20CM.
475 +)))
424 424  
477 +(((
425 425  Insert the probe inside, method like measure the surface.
479 +)))
426 426  
427 427  
428 428  
... ... @@ -452,9 +452,13 @@
452 452  
453 453  == 2.7 Calibration ==
454 454  
509 +(((
455 455  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
511 +)))
456 456  
513 +(((
457 457  After stable, user can use below command to calibrate.
515 +)))
458 458  
459 459  [[image:image-20220607171149-4.png]]
460 460  
... ... @@ -461,7 +461,7 @@
461 461  
462 462  (% style="color:#037691" %)**Calibration Payload**
463 463  
464 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
522 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
465 465  |(((
466 466  **Size**
467 467  
... ... @@ -481,7 +481,6 @@
481 481  Always 0x03
482 482  )))
483 483  
484 -
485 485  User can also send 0x14 downlink command to poll the current calibration payload.
486 486  
487 487  [[image:image-20220607171416-7.jpeg]]
... ... @@ -492,6 +492,7 @@
492 492  
493 493  
494 494  
552 +
495 495  == 2.8 Frequency Plans ==
496 496  
497 497  (((
... ... @@ -501,32 +501,61 @@
501 501  
502 502  === 2.8.1 EU863-870 (EU868) ===
503 503  
562 +(((
504 504  (% style="color:blue" %)**Uplink:**
564 +)))
505 505  
566 +(((
506 506  868.1 - SF7BW125 to SF12BW125
568 +)))
507 507  
570 +(((
508 508  868.3 - SF7BW125 to SF12BW125 and SF7BW250
572 +)))
509 509  
574 +(((
510 510  868.5 - SF7BW125 to SF12BW125
576 +)))
511 511  
578 +(((
512 512  867.1 - SF7BW125 to SF12BW125
580 +)))
513 513  
582 +(((
514 514  867.3 - SF7BW125 to SF12BW125
584 +)))
515 515  
586 +(((
516 516  867.5 - SF7BW125 to SF12BW125
588 +)))
517 517  
590 +(((
518 518  867.7 - SF7BW125 to SF12BW125
592 +)))
519 519  
594 +(((
520 520  867.9 - SF7BW125 to SF12BW125
596 +)))
521 521  
598 +(((
522 522  868.8 - FSK
600 +)))
523 523  
602 +(((
603 +
604 +)))
524 524  
606 +(((
525 525  (% style="color:blue" %)**Downlink:**
608 +)))
526 526  
610 +(((
527 527  Uplink channels 1-9 (RX1)
612 +)))
528 528  
614 +(((
529 529  869.525 - SF9BW125 (RX2 downlink only)
616 +)))
530 530  
531 531  
532 532  
... ... @@ -547,48 +547,94 @@
547 547  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
548 548  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
549 549  
637 +
638 +
639 +
550 550  === 2.8.3 CN470-510 (CN470) ===
551 551  
642 +(((
552 552  Used in China, Default use CHE=1
644 +)))
553 553  
646 +(((
554 554  (% style="color:blue" %)**Uplink:**
648 +)))
555 555  
650 +(((
556 556  486.3 - SF7BW125 to SF12BW125
652 +)))
557 557  
654 +(((
558 558  486.5 - SF7BW125 to SF12BW125
656 +)))
559 559  
658 +(((
560 560  486.7 - SF7BW125 to SF12BW125
660 +)))
561 561  
662 +(((
562 562  486.9 - SF7BW125 to SF12BW125
664 +)))
563 563  
666 +(((
564 564  487.1 - SF7BW125 to SF12BW125
668 +)))
565 565  
670 +(((
566 566  487.3 - SF7BW125 to SF12BW125
672 +)))
567 567  
674 +(((
568 568  487.5 - SF7BW125 to SF12BW125
676 +)))
569 569  
678 +(((
570 570  487.7 - SF7BW125 to SF12BW125
680 +)))
571 571  
682 +(((
683 +
684 +)))
572 572  
686 +(((
573 573  (% style="color:blue" %)**Downlink:**
688 +)))
574 574  
690 +(((
575 575  506.7 - SF7BW125 to SF12BW125
692 +)))
576 576  
694 +(((
577 577  506.9 - SF7BW125 to SF12BW125
696 +)))
578 578  
698 +(((
579 579  507.1 - SF7BW125 to SF12BW125
700 +)))
580 580  
702 +(((
581 581  507.3 - SF7BW125 to SF12BW125
704 +)))
582 582  
706 +(((
583 583  507.5 - SF7BW125 to SF12BW125
708 +)))
584 584  
710 +(((
585 585  507.7 - SF7BW125 to SF12BW125
712 +)))
586 586  
714 +(((
587 587  507.9 - SF7BW125 to SF12BW125
716 +)))
588 588  
718 +(((
589 589  508.1 - SF7BW125 to SF12BW125
720 +)))
590 590  
722 +(((
591 591  505.3 - SF12BW125 (RX2 downlink only)
724 +)))
592 592  
593 593  
594 594  
... ... @@ -613,110 +613,222 @@
613 613  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
614 614  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
615 615  
749 +
750 +
751 +
616 616  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
617 617  
754 +(((
618 618  (% style="color:blue" %)**Default Uplink channel:**
756 +)))
619 619  
758 +(((
620 620  923.2 - SF7BW125 to SF10BW125
760 +)))
621 621  
762 +(((
622 622  923.4 - SF7BW125 to SF10BW125
764 +)))
623 623  
766 +(((
767 +
768 +)))
624 624  
770 +(((
625 625  (% style="color:blue" %)**Additional Uplink Channel**:
772 +)))
626 626  
774 +(((
627 627  (OTAA mode, channel added by JoinAccept message)
776 +)))
628 628  
778 +(((
779 +
780 +)))
629 629  
782 +(((
630 630  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
784 +)))
631 631  
786 +(((
632 632  922.2 - SF7BW125 to SF10BW125
788 +)))
633 633  
790 +(((
634 634  922.4 - SF7BW125 to SF10BW125
792 +)))
635 635  
794 +(((
636 636  922.6 - SF7BW125 to SF10BW125
796 +)))
637 637  
798 +(((
638 638  922.8 - SF7BW125 to SF10BW125
800 +)))
639 639  
802 +(((
640 640  923.0 - SF7BW125 to SF10BW125
804 +)))
641 641  
806 +(((
642 642  922.0 - SF7BW125 to SF10BW125
808 +)))
643 643  
810 +(((
811 +
812 +)))
644 644  
814 +(((
645 645  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
816 +)))
646 646  
818 +(((
647 647  923.6 - SF7BW125 to SF10BW125
820 +)))
648 648  
822 +(((
649 649  923.8 - SF7BW125 to SF10BW125
824 +)))
650 650  
826 +(((
651 651  924.0 - SF7BW125 to SF10BW125
828 +)))
652 652  
830 +(((
653 653  924.2 - SF7BW125 to SF10BW125
832 +)))
654 654  
834 +(((
655 655  924.4 - SF7BW125 to SF10BW125
836 +)))
656 656  
838 +(((
657 657  924.6 - SF7BW125 to SF10BW125
840 +)))
658 658  
842 +(((
843 +
844 +)))
659 659  
846 +(((
660 660  (% style="color:blue" %)**Downlink:**
848 +)))
661 661  
850 +(((
662 662  Uplink channels 1-8 (RX1)
852 +)))
663 663  
854 +(((
664 664  923.2 - SF10BW125 (RX2)
856 +)))
665 665  
666 666  
667 667  
668 668  === 2.8.6 KR920-923 (KR920) ===
669 669  
862 +(((
670 670  (% style="color:blue" %)**Default channel:**
864 +)))
671 671  
866 +(((
672 672  922.1 - SF7BW125 to SF12BW125
868 +)))
673 673  
870 +(((
674 674  922.3 - SF7BW125 to SF12BW125
872 +)))
675 675  
874 +(((
676 676  922.5 - SF7BW125 to SF12BW125
876 +)))
677 677  
878 +(((
879 +
880 +)))
678 678  
882 +(((
679 679  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
884 +)))
680 680  
886 +(((
681 681  922.1 - SF7BW125 to SF12BW125
888 +)))
682 682  
890 +(((
683 683  922.3 - SF7BW125 to SF12BW125
892 +)))
684 684  
894 +(((
685 685  922.5 - SF7BW125 to SF12BW125
896 +)))
686 686  
898 +(((
687 687  922.7 - SF7BW125 to SF12BW125
900 +)))
688 688  
902 +(((
689 689  922.9 - SF7BW125 to SF12BW125
904 +)))
690 690  
906 +(((
691 691  923.1 - SF7BW125 to SF12BW125
908 +)))
692 692  
910 +(((
693 693  923.3 - SF7BW125 to SF12BW125
912 +)))
694 694  
914 +(((
915 +
916 +)))
695 695  
918 +(((
696 696  (% style="color:blue" %)**Downlink:**
920 +)))
697 697  
922 +(((
698 698  Uplink channels 1-7(RX1)
924 +)))
699 699  
926 +(((
700 700  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
928 +)))
701 701  
702 702  
703 703  
704 704  === 2.8.7 IN865-867 (IN865) ===
705 705  
934 +(((
706 706  (% style="color:blue" %)**Uplink:**
936 +)))
707 707  
938 +(((
708 708  865.0625 - SF7BW125 to SF12BW125
940 +)))
709 709  
942 +(((
710 710  865.4025 - SF7BW125 to SF12BW125
944 +)))
711 711  
946 +(((
712 712  865.9850 - SF7BW125 to SF12BW125
948 +)))
713 713  
950 +(((
951 +
952 +)))
714 714  
954 +(((
715 715  (% style="color:blue" %)**Downlink:**
956 +)))
716 716  
958 +(((
717 717  Uplink channels 1-3 (RX1)
960 +)))
718 718  
962 +(((
719 719  866.550 - SF10BW125 (RX2)
964 +)))
720 720  
721 721  
722 722  
... ... @@ -727,6 +727,8 @@
727 727  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
728 728  * Blink once when device transmit a packet.
729 729  
975 +
976 +
730 730  == 2.10 ​Firmware Change Log ==
731 731  
732 732  
... ... @@ -741,26 +741,51 @@
741 741  
742 742  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
743 743  
991 +(((
744 744  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
993 +)))
745 745  
746 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
747 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
995 +* (((
996 +AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
997 +)))
998 +* (((
999 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
1000 +)))
748 748  
1002 +(((
749 749  There are two kinds of commands to configure LSPH01, they are:
1004 +)))
750 750  
751 -* (% style="color:#4f81bd" %)** General Commands**.
1006 +* (((
1007 +(% style="color:#4f81bd" %)** General Commands**.
1008 +)))
752 752  
1010 +(((
753 753  These commands are to configure:
1012 +)))
754 754  
755 -* General system settings like: uplink interval.
756 -* LoRaWAN protocol & radio related command.
1014 +* (((
1015 +General system settings like: uplink interval.
1016 +)))
1017 +* (((
1018 +LoRaWAN protocol & radio related command.
1019 +)))
757 757  
1021 +(((
758 758  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
1023 +)))
759 759  
1025 +(((
1026 +
1027 +)))
760 760  
761 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
1029 +* (((
1030 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
1031 +)))
762 762  
1033 +(((
763 763  These commands only valid for LSPH01, as below:
1035 +)))
764 764  
765 765  
766 766  
... ... @@ -770,30 +770,31 @@
770 770  
771 771  (% style="color:#037691" %)**AT Command: AT+TDC**
772 772  
1045 +[[image:image-20220607171554-8.png]]
773 773  
774 -(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:710px" %)
775 -|(% style="width:154px" %)**Command Example**|(% style="width:223px" %)**Function**|(% style="width:330px" %)**Response**
776 -|(% style="width:154px" %)AT+TDC=?|(% style="width:223px" %)Show current transmit Interval|(% style="width:330px" %)(((
777 -30000
778 778  
779 -OK
780 780  
781 -the interval is 30000ms = 30s
1049 +(((
1050 +(% style="color:#037691" %)**Downlink Command: 0x01**
782 782  )))
783 -|(% style="width:154px" %)AT+TDC=60000|(% style="width:223px" %)Set Transmit Interval|(% style="width:330px" %)(((
784 -OK
785 785  
786 -Set transmit interval to 60000ms = 60 seconds
1053 +(((
1054 +Format: Command Code (0x01) followed by 3 bytes time value.
787 787  )))
788 788  
789 -(% style="color:#037691" %)**Downlink Command: 0x01**
1057 +(((
1058 +If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1059 +)))
790 790  
791 -Format: Command Code (0x01) followed by 3 bytes time value.
1061 +* (((
1062 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1063 +)))
1064 +* (((
1065 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
792 792  
793 -If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
794 794  
795 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
796 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1068 +
1069 +)))
797 797  
798 798  == 3.2 Set Interrupt Mode ==
799 799  
... ... @@ -801,18 +801,34 @@
801 801  
802 802  (% style="color:#037691" %)**AT Command: AT+INTMOD**
803 803  
804 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607153759-6.png?rev=1.1||alt="image-20220607153759-6.png"]]
1077 +[[image:image-20220607171716-9.png]]
805 805  
806 806  
1080 +(((
807 807  (% style="color:#037691" %)**Downlink Command: 0x06**
1082 +)))
808 808  
1084 +(((
809 809  Format: Command Code (0x06) followed by 3 bytes.
1086 +)))
810 810  
1088 +(((
811 811  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1090 +)))
812 812  
813 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
814 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1092 +* (((
1093 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1094 +)))
1095 +* (((
1096 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1097 +)))
815 815  
1099 +(((
1100 +
1101 +)))
1102 +
1103 +
1104 +
816 816  == 3.3 Calibrate Sensor ==
817 817  
818 818  Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
... ... @@ -825,7 +825,7 @@
825 825  
826 826  (% style="color:#037691" %)**Downlink Command: 0x26**
827 827  
828 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607154718-7.png?rev=1.1||alt="image-20220607154718-7.png"]]
1117 +[[image:image-20220607171917-10.png]]
829 829  
830 830  * Reply to the confirmation package: 26 01
831 831  * Reply to non-confirmed packet: 26 00
... ... @@ -913,7 +913,7 @@
913 913  The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
914 914  )))
915 915  
916 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654588469844-778.png?rev=1.1||alt="1654588469844-778.png"]]
1205 +[[image:1654593587246-335.png]]
917 917  
918 918  
919 919  Minimum Working Voltage for the LSPH01:
... ... @@ -958,7 +958,7 @@
958 958  
959 959  And the Life expectation in difference case will be shown on the right.
960 960  
961 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654588577573-122.png?rev=1.1||alt="1654588577573-122.png"]]
1250 +[[image:1654593605679-189.png]]
962 962  
963 963  
964 964  The battery related documents as below:
... ... @@ -973,7 +973,7 @@
973 973  [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
974 974  )))
975 975  
976 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607155856-8.png?rev=1.1||alt="image-20220607155856-8.png"]]
1265 +[[image:image-20220607172042-11.png]]
977 977  
978 978  
979 979  
... ... @@ -987,9 +987,13 @@
987 987  
988 988  === ​4.3.2 Replace the battery ===
989 989  
1279 +(((
990 990  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1281 +)))
991 991  
1283 +(((
992 992  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1285 +)))
993 993  
994 994  
995 995  
... ... @@ -999,7 +999,7 @@
999 999  
1000 1000  LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.
1001 1001  
1002 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654589001411-343.png?rev=1.1||alt="1654589001411-343.png"]]
1295 +[[image:1654593668970-604.png]]
1003 1003  
1004 1004  **Connection:**
1005 1005  
... ... @@ -1010,10 +1010,12 @@
1010 1010  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1011 1011  
1012 1012  
1306 +(((
1013 1013  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1308 +)))
1014 1014  
1015 1015  
1016 - [[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654589062541-567.png?rev=1.1||alt="1654589062541-567.png"]]
1311 + [[image:1654593712276-618.png]]
1017 1017  
1018 1018  Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1019 1019  
1654593587246-335.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +75.8 KB
Content
1654593605679-189.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +138.2 KB
Content
1654593668970-604.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +546.2 KB
Content
1654593712276-618.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +144.0 KB
Content
image-20220607171554-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.7 KB
Content
image-20220607171716-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +17.9 KB
Content
image-20220607171917-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +6.2 KB
Content
image-20220607172042-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +83.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0